2014-03-12T08:32:17-03:00You can find out which Preflight settings were used by using the Preflight plug-in in the relevant Report file.
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
PREPARE_FORMAGS Preflight
2014-03-12T12:32:56-03:00You can find out which Preflight settings were used by using the Preflight plug-in in the relevant Report file.
azul naval • marine blue • azul navalvermelho apache • red • rojo
verde limão • green lemon • verde limón
33/4 _ 45/633/4 _ 45/633/4 _ 45/6
Caixa fechada
Maio / 2014
0703
27110090
1440
0031
1411
Disponível também em tamanhos kids•Also available in kids sizes•Disponible tambien en talles de niños
Un
isse
x /
Un
isex
PREPARE_FORMAGS Preflight
2014-03-01T13:56:04-03:00You can find out which Preflight settings were used by using the Preflight plug-in in the relevant Report file.
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
azul naval • marine blue • azul navalcafé • dark brown • marrón oscuroamazônia • amazônia • amazônia
23/4 _ 45/633/4 _ 45/633/4 _ 45/6
Caixa fechada
Maio / 2014
0212
27110090
0727
0001
2619
Disponível também em tamanhos kids•Also available in kids sizes•Disponible tambien en talles de niños
Un
isse
x /
Un
isex
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Disponível também em tamanhos kids•Also available in kids sizes•Disponible tambien en talles de niños
6325
2090
Un
isse
x /
Un
isex
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
gris arena/dorado claromarinho/branco • navy blue/white • marino/blanco
33/4 _ 41/233/4 _ 41/2
33/4 _ 45/6
Caixa fechada
Maio / 2014
3498
07036328
2529
3562
05752719
Un
isse
x /
Un
isex
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
café • dark brown • marrón oscurovermelho apache • red • rojomarinho • navy blue • marino
33/4 _ 45/633/4 _ 45/633/4 _ 45/6
Maio / 2014
0212
07270001
1440
0090
0555
Disponível também em tamanhos kids•Also available in kids sizes•Disponible tambien en talles de niños
Caixa fechada/caixa grade/caixa grade com cabide
Un
isse
x /
Un
isex
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
rosa claro • light pink • rosa claromaravilha • shocking pink • rosado fuerte
lilás soft • soft lilac • lila soft
33/4 _ 41/223/4 _ 41/233/4 _ 41/2
Maio / 2014
0921
11390719
0703
1400
2529
Disponível também em tamanhos kids•Also available in kids sizes•Disponible tambien en talles de niños
Caixa fechada/caixa grade/caixa grade com cabide
Un
isse
x /
Un
isex
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Disponível também em tamanhos kids•Also available in kids sizes•Disponible tambien en talles de niños
Caixa fechada/caixa grade/caixa grade com cabide
Un
isse
x /
Un
isex
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
cinza aço •steel gray • acero grisrose gold • rose gold • rose gold
33/4 _ 41/233/4 _ 41/2
Caixa fechada/caixa grade/caixa grade com cabide
Un
isse
x /
Un
isex
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
branco • white • blancoamazônia • amazônia • amazônia
33/4 _ 45/633/4 _ 45/6
Caixa fechada/caixa grade/caixa grade com cabide
Un
isse
x /
Un
isex
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Comprando as Havaianas IPÊ, você ajuda a natureza: 7% do valor das vendas é revertidoao Instituto de Pesquisas Ecológicas (IPÊ), que se dedica à conservação da fauna e flora da Mata Atlântica, Amazônia e Pantanal.
With every purchase of Havaianas IPÊ, 7% of the sales will be donated to the Ecologic Research Institute (IPÊ). IPÊ is dedicated to conserving the fauna and flora of the Atlantic Forest, Amazon and Pantanal.
Con la compra de un par de Havaianas IPÊ, Ud. ayuda a la naturaleza: El 7% del valor de las ventas es destinado al Instituto de Investigaciones Ecológicas (IPÊ), que se dedica a la conservación de la fauna y de la flora del Bosque Atlántico, Amazonia y Pantanal.
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
marinho • navy blue • marinobranco • white • blanco
35/6 _ 45/635/6 _ 45/6
Caixa fechada/caixa grade/caixa grade com cabide
Maio / 2014
1440
0090
0001
0555
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
marinho/marinho • navy blue/navy blue • marino/marinocinza chumbo/cinza • grey/grey • gris/gris
35/6 _ 45/635/6 _ 45/6
35/6 _ 45/635/6 _ 45/6
5541 4368 28413876
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Ma
scu
lin
o / M
en’sExport: 4000047
Coleção 2014_2015/2015 Collection
HAVAIANAS SURF
•Code•Código •Color•Color •Sizes•TamanõsCódigo Cor Tamanhos6349 branco/branco/marinho • white/white/navy blue
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
marinho • navy blue • marinobranco/prata • white/silver • blanco/plata
0703 0555 05350154
33/4 _ 41/233/4 _ 41/2
33/4 _ 41/233/4 _ 41/2
Fem
inin
o / W
omen
’s
Maio / 2014
Export: 4131672
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
café metálico • dark brown metallic • marrón oscuro metálico rosa gum • rose gum • rosa gum
3927 37060713 4622
33/4 _ 41/233/4 _ 41/2
33/4 _ 41/233/4 _ 41/2
Caixa fechada/caixa grade/caixa grade com cabide
•Sizes•TamanõsCódigo
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
coralnew •coralnew • coralnuevo ice blue • ice blue • ice blue
0121 60242529 0642
33/4 _ 41/233/4 _ 41/2
33/4 _ 41/233/4 _ 41/2
Caixa fechada/caixa grade/caixa grade com cabide
Código •Sizes•Tamanõs
Aplique de plástico na tiraPlastic charm on the strapRemache de plastico en
la tira
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
laranja lux • orange lux • naranja luxtutti frutti • tutti frutti • tutti frutti
azul estrela • blue star • estrella azullilás soft • soft lilac • lila soft
33/4 _ 41/233/4 _ 41/233/4 _ 41/233/4 _ 41/2
06665211
4161
5209
3847
Fem
inin
o / W
omen
’s
Caixa fechada/caixa grade/caixa grade com cabide
2529
Julho / 2014
2655
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
bege palha • beige • begemarinho • navy blue • marino
preto • black • negro
0719
01213581
0555
5178
0090
Fem
inin
o / W
omen
’sExport: 4132921HAVAIANAS FLAT
Caixa fechada/caixa grade/caixa grade com cabide
33/4 _ 41/2 33/4 _ 41/233/4 _ 41/2
33/4 _ 41/233/4 _ 41/233/4 _ 41/2
Julho / 2014
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
rosa gum • rose gum • rosa gumroxo • purple • violáceo
maravilha • shocking pink • rosado fuerterose gold • rose gold • rose gold
33/4 _ 41/233/4 _ 41/2
33/4 _ 41/233/4 _ 41/233/4 _ 41/233/4 _ 41/2
Fem
inin
o / W
omen
’s
Maio / 2014
0121
0719
3581 4622
0703
0090
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Disponível também em tamanhos kids•Also available in kids sizes•Disponible tambien en talles de niñosMaio / 2014
0703
0001 0090
51782719
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
rosa claro • light pink • rosa clarolilás escuro • dark purple • purpura oscuro
33/4 - 41/233/4 - 41/2
Caixa fechada/caixa grade/caixa grade com cabide
Disponível também em tamanhos kids•Also available in kids sizes•Disponible tambien en talles de niñosMaio / 2014
3581
1139
2531
3503
0921
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
rosa claro • light pink • rosa claro branco/coral • white/coral • blanco/coral
lilás soft • soft lilac • lila soft
33/4 _ 41/233/4 _ 41/233/4 _ 41/2
Caixa fechada/caixa grade/caixa grade com cabide
0642
11392655
2641
5557
2529
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
vinho de uva • grape wine • uva de vinificacionbranco •white • blanco
0555 49243491 0001
33/4 _ 41/233/4 _ 41/2
33/4 _ 41/233/4 _ 41/2
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Disponível também em tamanhos kids•Also available in kids sizes•Disponible tambien en talles de niños
0580
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Disponível também em tamanhos kids•Also available in kids sizes•Disponible tambien en talles de niños
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
rosa gum • rose gum • rosa gumlaranja neon • neon orange • naranja neon
azul estrela • blue star • estrella azul
33/4 _ 41/233/4 _ 41/233/4 _ 41/2
2967
0535
5206
3581
3847
4622
Caixa fechada/caixa grade/caixa grade com cabide
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
café/café • dark brown/dark brown marrón oscuro/marrón oscuro
rose gold • rose gold • rose goldbege palha • beige • bege
33/4 _ 41/2
33/4 _ 41/233/4 _ 41/2Caixa fechada/caixa grade/caixa grade com cabide
3544
25485178
3581
1164
0121
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
rosa orquídea • orchid rose • rosa orquideabranco/dourado/preto • white/golden/black
blanco/dorado/negro
•Code•Código •Color•Color •Sizes•TamanõsCódigo Cor Tamanhos0555 marinho • navy blue • marino
2655 05552835
33/4 _ 41/233/4 _ 41/2
33/4 _ 41/2
Maio / 2014
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
bege palha • beige • begerose gold • rose gold • rose gold
33/4 _ 41/233/4 _ 41/2
Caixa fechada/caixa grade/caixa grade com cabide
3491
0090
3581
0121
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
cinza/preto • grey/black • gris/negroazul firenze • firenze blue • azul firenze
23/4 _ 35/623/4 _ 35/6
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
azul estrela • blue star • estrella azulamarelo cítrico • citrus yellow • amarillo citrus
23/4 _ 35/623/4 _ 35/6
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Heidelberg PDF Report
FranklinGothic-Book: Font size 5.3 pt is below 6.0 pt
Heidelberg PDF Report
FranklinGothic-BookItalic: Font size 5.3 pt is below 6.0 pt
Heidelberg PDF Report
FranklinGothic-Book: Font size 3.9 pt is below 6.0 pt
ice blue • ice blue • ice bluerosa orquídea • orchid rose • rosa orquidea
23/4 _ 35/623/4 _ 35/6
•Code•Código •Color•Color •Sizes•TamanõsCódigo Cor Tamanhos0335 branco/verde lago • white/lake green • blanco/verde lago 23/4 _ 35/6
0642 03352655
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Heidelberg PDF Report
FranklinGothic-Book: Font size 5.3 pt is below 6.0 pt
Heidelberg PDF Report
FranklinGothic-Medium: Font size 5.3 pt is below 6.0 pt
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Heidelberg PDF Report
FranklinGothic-Book: Font size 5.3 pt is below 6.0 pt
Heidelberg PDF Report
FranklinGothic-Medium: Font size 5.3 pt is below 6.0 pt
rosa cream • crystal rose • rosa cristalbranco • white • blanco
23/4 _ 35/623/4 _ 35/6
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Heidelberg PDF Report
FranklinGothic-Book: Font size 5.3 pt is below 6.0 pt
Heidelberg PDF Report
FranklinGothic-Medium: Font size 5.3 pt is below 6.0 pt
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Heidelberg PDF Report
FranklinGothic-Book: Font size 5.3 pt is below 6.0 pt
Heidelberg PDF Report
FranklinGothic-Medium: Font size 5.3 pt is below 6.0 pt
Aplique de plástico na tiraPlastic charm on the strap
Remache de plastico en la tira
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Heidelberg PDF Report
FranklinGothic-Book: Font size 5.3 pt is below 6.0 pt
Heidelberg PDF Report
FranklinGothic-Medium: Font size 5.3 pt is below 6.0 pt
Heidelberg PDF Report
FranklinGothic-BookItalic: Font size 5.3 pt is below 6.0 pt
•Code•Código •Color•Color •Sizes•TamanõsCódigo Cor Tamanhos6797 rosa claro/coral • rosa cream/coral • rosa claro/coral 17/8 _ 25/6
2197 67972529
Aplique de plástico na tiraPlastic charm on the strap
Remache de plastico en la tira
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Heidelberg PDF Report
FranklinGothic-Book: Font size 5.3 pt is below 6.0 pt
Heidelberg PDF Report
FranklinGothic-Medium: Font size 5.3 pt is below 6.0 pt
Heidelberg PDF Report
FranklinGothic-BookItalic: Font size 5.3 pt is below 6.0 pt
Aplique de plástico na tiraPlastic charm on the strap
Remache de plastico en la tira
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Heidelberg PDF Report
FranklinGothic-Book: Font size 5.3 pt is below 6.0 pt
Heidelberg PDF Report
FranklinGothic-Medium: Font size 5.3 pt is below 6.0 pt
Heidelberg PDF Report
FranklinGothic-BookItalic: Font size 5.3 pt is below 6.0 pt
Aplique de plástico na tiraPlastic charm on the strap
Remache de plastico en la tira
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Heidelberg PDF Report
FranklinGothic-Book: Font size 5.3 pt is below 6.0 pt
Heidelberg PDF Report
FranklinGothic-Medium: Font size 5.3 pt is below 6.0 pt
Heidelberg PDF Report
FranklinGothic-BookItalic: Font size 5.3 pt is below 6.0 pt
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 12.0.033 Copyright 2012 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CD102_CoucheNovatec_ToyoNV100_Hyb200_270313_U330_K95_9-9.icc RGB Image: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Print Profile.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Relative Colorimetric Black Point Compensation: yes Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: no Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Prinect PDF Report 12.0.032 - 1 - 03/01/2014 01:55:54 PM
Document overviewFile name: 35338_PANTONE_ATACADO.pdfTitle:Creator: Adobe InDesign CS6 (Macintosh)Producer: Adobe PDF Library 10.0.1Author: -Creation Date: 02/26/2014 09:54:26 PMModification Date: 03/01/2014 01:55:22 PMFile size: 55.9 MByte / 57209.5 KByteTrapped: NoOutput Intent: -PDF/X Version: -PDF Version: 1.6Number of pages: 47Media Box: 192.58 x 102.58 mmTrim Box: 170.00 x 80.00 mm
FontsFranklinGothic-Book: Font size 3.9 pt is below 6.0 pt #1 (39)FranklinGothic-Book: Font size 5.3 pt is below 6.0 pt #1077 (1-47)FranklinGothic-Medium: Font size 5.3 pt is below 6.0 pt #267 (1-47)FranklinGothic-BookItalic: Font size 3.2 pt is below 6.0 pt #9 (11)FranklinGothic-BookItalic: Font size 5.3 pt is below 6.0 pt #32
Prinect PDF Report 12.0.032 - 2 - 03/01/2014 01:55:54 PM
ContentLine weight 0.047 mm is below hairline threshold 0.088 mm #16 (1-3,5-7,21,23,28)Line weight 0.055 mm is below hairline threshold 0.088 mm #5 (1,3,21,23,29)
FontsFranklinGothic-Book: Font size 3.9 pt is below 6.0 pt #1 (45)FranklinGothic-Book: Font size 5.3 pt is below 6.0 pt #1209 (2-53)FranklinGothic-Medium: Font size 5.3 pt is below 6.0 pt #297 (2-53)FranklinGothic-BookItalic: Font size 3.2 pt is below 6.0 pt #9 (12)FranklinGothic-BookItalic: Font size 5.3 pt is below 6.0 pt #32
FontsFranklinGothic-Book: Font size 3.9 pt is below 6.0 pt #1 (45)FranklinGothic-Book: Font size 5.3 pt is below 6.0 pt #1209 (2-53)FranklinGothic-Medium: Font size 5.3 pt is below 6.0 pt #297 (2-53)FranklinGothic-BookItalic: Font size 3.2 pt is below 6.0 pt #9 (12)FranklinGothic-BookItalic: Font size 5.3 pt is below 6.0 pt #32