PAPER CHEMICALSWATER TREATMENT CHEMICALS

INDUSTRY SPECIALITY CHEMICALS

CHEMICAL RAW MATERIALS

INTRODUCTION

We have been developing specialty chemicals of various kinds that improve on a

quality of paper,textile,water since 2002.

We produce and distribute all kind of paper processing

chemicals and additives of coated paper, surfactant and chemical raw materials,

textile, water management chemicals.

And now we have many customers who are using our product in Korea and Asian

country.

For meeting of our customer’s requirement we will do our best in parts of the

developing products and the rigid quality control systems.

We will concentrate our efforts development of new products

and the best products.

Coating AdditiveAnionic wax emulsionExcellent water-proof

Water Repellent

Process EquipmentReduces MaintenanceIncrease Production

Cleaner

Coating ColorInsolubilizer for Binder in Coating Color. Mottling and blistering resistance are improved and printing effect is maximized

Insolubilizer

Stock preparation(Machine chest)

Improved dimension stability , Improved printabilityReduces linting

Linting/Dusting

Wet endIt can improve the efficiency of retention aids, Dry and wet strength agents, and internal sizing agents, or reduce their use amount while keeping the same effects.

Fixing agent

Size pressAnionic emulsion , Resistance to water or ink Improving Of printability

Surface sizing

Wet endReduce Downtime. Improve QualityPitch/Sticky control

Stock preparationReduce fiber cost , Increase production. Enhance physical properties, Improve Quality & Strength

Wet & Dry Strength

Stock preparation, Wet endPrevent Scale contamination, A wide scope Temperature, Consistency, PH

Scale control

Stock preparationImprove ink removal , Improve paper QualityReduce Bleaching cost

Deinking

Stock preparationImprove Tissue Softness & SmoothnessSoftner

Mixing chest, Machine chestReduce Downtime , Prevent the slime,Prevent the bacteriaBiocides

Wet end, Coating starchImprove Quality , Increase Drainage, Improve runabilityAntifoam

ClothingReduce Downtime , Increase Quality,Improve Clothing shelf-lifeWire Passivation/Felt Conditioning

Tissue (Yankee Dryer)Controlling Yankee Dryer release propertiesReleasing agent

Tissue (Yankee Dryer)Increase sheet hand feel properties , Increase blade shelf-lifeCreping agent

APPLICATIONFEATURESPRODUCTS

PAPER CHEMICALS

TISSUE FINE PAPER NESPRINT WATER TREATMENTPACKAGING

• CREPING/RELEASING

• WIRE PASSIVATION

• FELT CONDITIONING

• BIOCIDES

• ANTIFOAM

• SCALE CONTROL

• CLEANERS

• WET STRENGTH

• DRY STRENGTH

• PITCH/STICKY

CONTROL

• SOFTNER

• BOILOUT

• DUSTING CONTROL

• WHITE WATER

CONTROL

• DEINKING

• FELT CLEANER

• BIOCIDES

• ANTIFOAM

• SCALE CONTROL

• CLEANERS

• ROLL RELEASE

• PITCH/STICKY

CONTROL

• INSOLUBILIZER FOR

COATING COLOR

• BOILOUT

• WATER TREATMENT

• SIZING

• FELT CONDITIONING

• STRENGTH

• FELT CONDITIONING

• CLEANER

• BIOCIDES

• ANTIFOAM

• SCALE CONTROL

• LINTING/DUSTING

CONTROL

• ROLL RELEASE

• PITCH/STICKY

CONTROL

• WATER CLARIFICATION

• BOILOUT

• DEINKING

• FIXING AGENT

• SCALE CONTROL

• FELT CONDITIONING

• WIRE PASSIVATION

• BIOCIDES

• ANTIFOAM

• CLEANERS

• ROLL RELEASE

• PITCH/STICKY

CONTROL

• INSOLUBILIZER FOR

COATING COLOR

• BOILOUT

• WATER TREATMENT

• WATER REPELLENT

• WET/DRY STRENGTH

• DEINKING

• COAGULANT

• FLOCCULANT

• BIOCIDES

• ANTIFOAM

• SLUDGE DEWATERING

• CLEANERS

• ORDOUR CONTROL

• FRESH WATER

STERILIZATION

• SCALE CONTROL

• BOILER TREATMENT

Paper Market Products :

PAPER CHEMICALS

TISSUE Creping AgentProducts : HISOFT – C SERIESHisoft is a cationic polyamide adhesive in an aqueous solution. It is one of a series of specialty formulated crepe adhesive used in

the manufacturing of tissue and towel products. It is compatible with all crepe releasing agents, to provide the proper balance for

effective creping. It has excellent rewet properties, Yankee surface protection, and adhesive. It can increase sheet hand feel properties

and blade shelf-life.

TISSUE Softener and Crepe Release AgentProducts : HISOFT – Q & R SERIESHisoft have been designed specifically to be added to paper stock by wet end addition for the purpose of softening tissue and

absorbent papers or by the surface spray application method to improve Yankee dryer crepe release properties.

It contains a blend of fully refined mineral oil, esters and nonionic surfactants that makes this product easily emulsify in water.

It is specifically formulated as an effective crepe release in the MFG of tissue and towel products. It is compatible with all commercial

crepe adhesives, to provide the proper balance for effective creping.

PAPER CHEMICALS

DefoamerProducts : FETROL – DF SERIESMixture of aliphatic hydroxy compounds and hydrocarbons in the form of an aqueous emulsion(water soluble & oil types)

Foam control for paper and waste water treatment industrial process.

14%Weak

AnionicMilk-white

Silicone

Emulsion FETROL DF -220

Foam control for waste water treatment

industrial process.25%

Weak

AnionicMilk-white

Silicone

EmulsionFETROL DF -130

Foam control for paper and waste water treatment industrial process.

16%Weak

AnionicMilk-white

Silicone

Emulsion FETROL DF -110

Silicone oil

compound

Composition

Nonionic

Ionic

Activity

FETROL DF -500

Name of Products

100% active content, effective in

nonaqueous system.100%

Translucent

gray

Properties＆ FeaturesSolid

ContentsAppearance

Foam control for papermaking.

Used hot water system.30%FETROL DF -620

Foam control for papermaking.

Used relatively hot water system.30%FETROL DF -612

Foam control for papermaking.

Used cold water system.30%FETROL DF -506

Foam control for membrane and high

temp. water treatment.30%FETROL DF -610

Fatty alcohol

＆ fatty acid

Ester mixture

Composition

Weak

anionic

Ionic Activity

FETROL DF-105

Name of Products

Foam control for membrane and high

temp. water treatment.18%

Milk-white

emulsion

Properties＆ FeaturesSolid ContentsAppearance

PAPER CHEMICALS

Dry & Wet Strength ResinProducts : NEOLEX – WS,DS SERIESDry strength resin increase burst strength and tensile strength by hydrogen bond and ionic bond with cellulose and hemicellulose in pulp.

Wet Strength Resin is the Epichlorohydrin modified cationic polyamide resins for better addition use, and have the effect of the improving

wet strength.

Contaminants cleaning Agent on DryerProducts : FETROL – DC SERIESNow and day, the most important target in the Paper industry is, producing paper of good quality, and more fast. But, occasionally is

happened to spend many times for cleaning and repair by frequent breakdown and pollution of production facilities, and

case that these problems cause hindrance to achieve paper-manufacturing company’s target. Hereupon our company, minimizing

occurrence of Paper-Dust-Lump that is happened in Dryer, try to reduce problem that refer over, and also maintain the best

dryer condition, and satisfy paper-manufacturing companies’desire. It is, by developed product to fulfill Paper-Manufacturing

Companies’desire. We believe that this product give many advantages to you.

PAPER CHEMICALS

Contaminants Control Machine Clothing Products : FETROL – WP,MC,SC,DC,FC SERIESPrevention of pitch, stickies, glues, scale and other wet end contaminants on the Wire, Felts, Machine, Pipe or eliminates deposit accumulation r

esulting in improved sheet quality and extended life. Improved machine runnability.

BiocideProducts : FETROL – BC SERIESThe expected benefits of Biocide are as follows.

- Excellent for removing fungi and algae which form slime

- Prevents the slime from further development with maintaining its property long

- Works well all over the PH range

- Can be effectively used with other chemicals with optimal compatibility

Deinking AgentProduct : DEINKING – DI SERIESAs the Deinking agent of ONP(Magazine + Newsprint + Ground wood free, etc) used,

DEINKING chemical to be developed suitable for flotation/washing process system is dispersant/collecting nonionic surfactant.

This surfactant specifically designed to maximize ink removal for printed recycled fiber and office waste deinking system.

This product has demonstrate excellent dirt removal capability by effectively conditioning the inks found in white ledger furnishes.

The presence of kneading or dispersion enhances its performance. This product is intended for paper industry use only.

1. It is a nonionic surfactant of special alcohol delivative that maximized ink aeration in flotation cells 2. It is very excellent in absorbing ink into foams by preventing ink particles from re-adhering to foams 3. It has very little loss of textile during processes, and minimizes foam troubles during deinking process 4. Easy to treat waste water and good bio-degradability

PAPER CHEMICALS

InsolubilizerProducts : NEOLEX – CI SERIESThere are many chemically different types of insolubilizers, but they all have the same function – to add Water Resistance.

Water resistance is particularly important in offset printing, but also for wallpaper and in storage of board packages.

In double-coated board, crosslinkers are used in the pre-coating to impart water resistance against the topcoat.

The water resistance can be measured as wet rub and wet pick or seen as less pick, print mottle, or binder migration.

The water sensitivity of paper and board coating originates from the fact that water-soluble binders tend to lose their binding

power in contact with water and dissolve. This water sensitivity of binders can be described as the amount of O-atoms

in the molecule (in hydroxyl and carboxyl groups). The water sensitivity can be decreased by crosslinking the soluble binders

together with insolubilizers or by building an insoluble net around the binders.

It causes ionization of coating color to delay through hydrogen bonding with water molecules and enhances liquidity.

After drying is started and water is removed, rapid ionic bonding between cationic ion and anionic ion makes floating point lower

and binder migration is restricted. Therefore, coating layer becomes thicken and multi-porous. Mottling and blistering

resistance are improved and printing effect is maximized.

Surface Sizing AgentProducts : EX – SERIESEX is a surface sizing agent for paper and paperboard. This product is added alone or combined with starch on unsized or internally sized paper, acid or neutral. It is slightly anionic and does not need alum, which does not reduce the efficiency.

Water RepellentProducts : POLYFIX– PW SERIESPOLYFIX is water repellent of paraffin wax type. This product is can be used with starch

And binder and have a good stability of emulsification.

PAPER CHEMICALS

Waste water systemThese products combine heavy metal ions in wastewater and form insoluble materials for effective metal ion removal.

Heavy metal remover

Waste water systemThese products are effective anionic flocculants selected for chemical treatment of wastepaper.

They can be used with sedimentation or flotation methods.This products are water-soluble cationic polymer flocculants used for easing sludge thickening or solid-liquid separation (dewatering) of colloidal suspensions.

Flocculant

Waste water systemThis product is developed for biological treatment of wastewaters. It shows superior effects when used in active sludge treatment.

Microbial propagation aid

Waste water systemThese products are odor-cides prepared for removing offensive in inhibiting the odor-origin microbial growth and have superior de-odoring effects.

Odor Control

Waste water systemThese products are cleaning agents for filter cloth to solve the problems of increased sludge cake water content and lower dewatering speed due to filter cloth contamination.

Cleaners

Waste water systemThese products are very effective in removing general oils, emulsion oils, and color pigments, or in treating emulsion polymerization wastewaters.

Coagulant

Waste water systemThese products are economical defoamers that can be widely used in sewage and wastewater treatment fields. They are made from chemically and physiologically stable silicones, and they have both good defoaming and antifoaming properties.

Defoamer

APPLICATIONFEATURESPRODUCTS

WATER TREATMENT CHEMICALS

PASSPASSPASSPASSPASSPASSPASSPASSPolynuclear Compounds, 260-350nmPASSPASSPASSPASSPASSPASSPASSPASSCarbonizable Substance

1.4771.4741.47151.4711.4671.4661.46051.4755 Refractive Index, D20

143103.5757144.530.512.217.748Kinematic Viscosity, 40.0 cSt℃

-15.0-18.0-18.0-18.0-18.0-18.0-28.0-36Pour Point, ℃

280270266260250230202166Flash Point, C.O.C ℃

0.8680.8640.8580.8560.8470.8430.8350.822Specific Gravity, 15/4℃

3030303030303030Saybolt Color

ClearClearClearClearClearClearClearClearAppearance

FE-700FE-550FE-400FE-350FE-250FE-150FE-70FE-50ITEMS

ITEMS FL-550 FL-700 FL-900 FL-1100 FL-1300

Appearance Clear Clear Clear Clear Clear

Saybolt Color 30 30 30 30 30

Specific Gravity, 15/4℃ 0.864 0.873 0.8733 0.874 0.877

Flash Point, C.O.C ℃ 270 280 286 300 304

Pour Point, ℃ -18 -15 -9 -9 -6

Kinematic Viscosity, 40.0 cSt ℃ 103.5 143 173 210.5 235

Refractive Index, D20 1.474 1.4787 1.479 1.479 1.478

CHEMICAL RAW MATERIALS

White Mineral Oils

1)FDA(a) Grade

2)FDA(b) Grade

CHEMICAL RAW MATERIALS

Product Name

Appearance

CP ( )℃ HLB Application

NP - 2 Liquid <25 5.7 Emulsifier (W/O type)

NP - 3 Liquid <25 8.2 Moisture control

NP - 4 Liquid <25 8.9 Wetting, Dispersion

NP - 5 Liquid <25 10.5 　

NP - 6 Liquid <25 10.9 　

NP - 7 Liquid <25 11.7 　

NP - 8 Liquid 30 - 34 12.3 Emulsifier (W/O type)

NP - 9 Liquid 50 - 55 12.8 Penetrate, Cleaning

NP - 10 Liquid 65 - 69 13.3 Textile auxiliaries

NP - 11 Paste 72 - 76 13.7 　

NP - 12 Paste 79 - 84 13.9 　

NP - 13 Paste 87 - 91 14.4

NP - 15 Paste 92 - 98 15.0 　

NP - 20 Soild >100 16.0 Emulsifier (W/O type)

NP - 30 Flake >100 17.2 Emulsifier for emulsion

NP - 40 Flake >100 18.0 Stabilizer

NP - 50 Flake >100 18.2 Dispersing agent

NP - 100 Flake >100 19.1 　

◈ Textile industry

NP-3 ~ NP-20 : Spinning, dyeing application (bleaching, soaping agent)

NP-6 ~ NP-16 : Wetting, Dispersion, Cleaning

◈ Metal industry

NP-3 ~ NP-16 : Emulsifier for cutting oils

NP-8 ~ NP-16 : Grease remover, Cleaning Metal surface treatmenter

◈ Dyeing/Pigment

NP-6 ~ NP-8 : Emulsifier

NP-6 ~ NP-60 : Dispersion agent

◈ Synthetic resin

NP-20 ~ NP-100 : Dispersing emulsifier for emulsion polymerization

◈ Fertilizer

NP-6 ~ NP10 : Anti-scattering agent, Anti-caking agent

◈ Paper and Pulp

NP-5 ~ NP-12 : Pitch dispersing agent

NP-8 ~ NP-12 : Deiniking, Bleaching, Felt cleaning

◈ Rubber industry

NP-5 ~ NP-10 : Emulsifier for emulsion polymerization

◈ General detergent

NP-6 ~ NP-16 : Detergent base

Polyoxyethylene Nonylphenyl ether

CHEMICAL RAW MATERIALS

Polyoxyethylene Glycol

Dispersant, Emulsifier, Setting agent ◈ Agricultural chemicals

Viscosity controller, Absorption agent ◈ Ink industry

Antistatic, Plasticizer, Synthetic leather modifier, Base material for polyurethane, Special diol forpolyester synthesis

◈ Surfactant industry

Base material for cream, lnjection solvent, Emulsifier, Dispersant, Cleaner, Lubricant, Plasticizer ◈ Pharmaceuticals

Intermediate for cosmetics, Additives and base material for handcream shampoo, lotion ◈ Cosmetics

Shrinkage inhibitor, treatmenter for wood ◈ Wood industry

PEG-200,300,400 : Softener, wetting agent, PEG-1500 : Lubricant for calendering ◈ Paper industry

Rust inhibitor, additives for grease, lubricants ◈ Metal industry

Release agent for Rubber foam or Latex foam Release agent for Tire molding, Lubricants forextruder molding

◈ Rubber industry

Softener, Antistatic agent, Cleaner, Dispersant, Emulsifier, Dyeing auxiliaries, sizing agent ◈ Textile industry

Product name Appearance MW MP (℃) Application

PEG - 200 Liquid 190 - 210 <0℃ Dispersant, Emulsifier

PEG - 300 Liquid 285 - 315 <5℃ Dispersant, Emulsifier

PEG - 400 Liquid 380 - 420 4 - 8℃ Cosmetics, Dispersing

PEG - 600 Liquid 570 - 630 18 - 22℃ Lubricant, Electric coating

PEG - 1000 Solid 950 - 1050 35 - 39℃ Wetting

PEG - 1500 Solid 1300 - 1600 43 - 46℃ Softener, Tablet coating

PEG - 2000 Solid 1900 - 2100 49 - 53℃ Softener, Tablet coating

PEG - 4000 Flake 3000 - 3700 53 - 57℃ Cosmetics, Dispersant

PEG - 6000 Flake 6000 - 7000 56 - 61℃ Cosmetics, Dispersant

PEG - 8000 Flake 7000 - 9000 61 - 63℃ 　

CHEMICAL RAW MATERIALS

Polyoxyethylene Alkyl Ether

Product name Appearance CP (℃) HLB Application

LA - 2 0.5max. - 6.2 Emulsifier for cosmetics / mineral oils

LA - 3 0.5 - 8.1 Base for Phosphate ester

LA - 5 0.5 <25 10.8 　

LA - 7 0.5 53 - 58 12.3 Emulsion, Wetting, Dyeing auxiliaries

LA - 9 0.5 78 - 82 13.4 　

OA - 5 0.5 <25 9.4 Mineral oil, Emulsifier, Defoamer

OA - 10 0.5 60 - 65 12.4 Emulsifier, Wetting, Cleaning

OA - 20 0.5 >100 15.4 Dyeing auxiliaries

CA - 3 0.5 - 7.1 Mineral Emulsifier (W/O type)

CA - 5 0.5 - 9.5 　

CA - 7 0.5 <25 11.2 Paraffin wax Emulsifier

CA - 10 0.5 73 - 79 12.9 Dyeing auxiliaries Emulsifier (cosmetics)

CA - 20 0.5 >100 15.7 Emulsion stabilizer (wax,latex)

SA - 2 0.5 - 5.5 　

SA - 7 0.5 - 10.7 　

SA - 15 0.5 - 15.0 Dyeing auxiliaries

SA - 20 0.5 - 15.3 Emulsifier for Ccometics (W/O type)

SA - 30 0.5 - 16.7 Emulsion stabilizer (wax,latex)

SC - 13 0.5 - 12.7 　

SC - 20 0.5 - 15.5 　

SC - 30 0.5 - 16.7 　

AMAZON PAPYRUS KOREA

HEAD OFFICE : 757-7,Bongsan-Dong, Yuseong-Gu, Daejeon,305-506,KOREA

TEL : +82 42 822 9551 FAX : +82 42 822 9552