PaperCut User Guide If you have previously used print software prior to the Fall 2012 semester, it is highly recommended to remove the old software (Print Limit Pro).

Windows users, double click on your Computer and go to your C: drive. Look for one of the following folders: Program Files

Program Files (x86)

Look for the ‘Print Limit Pro’ folder and delete it. Also, delete the ‘JMLS Print Client’ icon on your desktop

Mac Users, simply go to your Mac Hard drive, and delete the Print Limit Pro from the ‘Applications’ folder

I. PaperCut Client Installation *In order for the print client to successfully install, it is necessary that you are connected to the JMLS

Wireless Network.

A. Windows Operating Systems client (Vista or 7)

1. Download the Windows version of the software. Once downloaded, open the zip file containing the software (Papercut-Win.zip)

2. Extract the contents of the zip file by clicking ‘Extract All Files’ in your

window. Double-click on client-local-install.exe

3. Accept all defaults for the installation, and click next through all prompts to install the software.

4. At the end of the installation, after clicking finish, the software will open

and prompt you for your user ID and password. Please enter your NetID (account you use to access wireless) username/password

5. Once you have logged in, you should see your account balance, and you

have successfully installed the software

Now that the software is installed, you now have to map to the

network printers

1. Go to your Start Menu and select Devices and Printers

2. At the top of your window, click Add Printer.

3. Next select Add a network, wireless or Bluetooth printer.

4. Next, click The printer that I want isn’t listed

5. Next, select Select a shared printer by name. In the field, enter the following:

\\delta\Lab_04 for the 4th floor printer

\\delta\Lab_05 for the 5th floor printer \\delta\LawReview for members of the Law Review/Journal

Please add one printer at a time, but once your desired printer is entered,

click Next

6. You will be prompted to enter a username and password; once again enter your NetID (wireless) username and password. Make sure that in

the username field, enter JOHNMARSHALL\username (substitute your own username after the \ ). Click OK.

7. Next you should receive a prompt indicating that drivers are about to be installed on your computer. Select Install Driver.

8. Once the drivers install, click Finish. You have successfully installed the printer(s) and are ready to print to the JMLS network printers.

B. Mac OS X

(i) Print Client Installation

1. Select and download the Mac version of PaperCut software from the IT pages

2. Once the download finishes, go to the location where the zip file was downloaded and double-click the zip file to extract its contents.

3. Once extracted double-click on the client-local-install installation script.

4. Click Yes to install the print client.

5. Once the installation is complete, enter your John Marshall account username and password when prompted.

(ii) Connect to printers

1. Click on the Apple menu in the upper left hand portion of the screen and select System Preferences.

2. Click on Print & Fax.

3. Click the (+) to add a printer

4. Tiger: Hold down the control or option key on the keyboard while clicking More Printers and select Advanced from the top drop-down list.

Leopard: Hold down the control key on the keyboard while clicking the toolbar

and select Customize Toolbar. Drag the Advanced icon to the toolbar. Click the newly added Advanced button.

5. Select a Windows device type, or Windows Printing via Samba on Tiger.

6. For the URL, type in smb:// delta/printername where you substitute

printername: Lab_04 (4th Floor Printer) or Lab_05 (5th Floor Printer)

Make sure that in the Name field you specify whether the printer is the 4th or 5th Floor printer.

7. Click the Print Using: drop down menu and select Select a driver to use

8. In the available field, type the following depending on the printer you are

adding:

LaserJet 8150 4th Floor Printer LaserJet P4010 5th Floor Printer

Select the print driver and click Add

9. Make the following selections:

LaserJet 8150: select Tray 4 and Duplex Unit, then click Continue.

LaserJet P4010 or P4014: select HP LaserJet P4014 from the Printer Model drop down menu, then click Continue.

II. Using PaperCut

1. Prior to printing, please make sure the PaperCut client is running. If the

client is running, you should see the dollar indicator in the upper right hand part of your screen

2. Open the document that you want to print, and select the desired printer from the Printer: drop down menu. Proceed to print.

3. If you are prompted for a username and password in either Mac or Windows,

in the username or Name field, enter JOHNMARSHALL\username , substituting the your own NetID/username in place of username

4. Once the print job is sent, you should get the following notification. Click the Print button to release the job. Shortly after the job has been released

to the printer, the amount will be deducted from your account, and the dollar amount will decrease in your Print Limit Pro program window.

III. Your PaperCut Account

1. Your PaperCut Account information can be accessed by clicking on the Details… link located in the lower right-hand corner of your PaperCut program

window.

2. You will be directed to a secure website. If your username is not in the username field, enter your username, and your password in the password

field. Click the Login button.

3. Once you have been authenticated, you will see the following screen. This screen displays your printing statistics, and is also where you add printing

value to your account.

4. Click on the Use Card link in the left hand portion of your window.

5. Enter the code from the card and press the Use Card button to add the

value of the card to your account. Once the code is entered, the value of

the card is transferred to your account, and the card is no longer valid.