Parameter Reference Guide - NodeB

NN-20500-027

Wireless Service Provider Solutions

W-CDMAAlcatel-Lucent 9300 W-CDMA Product Family -Parameter Reference Guide - NodeB ParametersNN-20500-027 09.05 Preliminary September 2008

Wireless Service Provider Solutions

W-CDMAAlcatel-Lucent 9300 W-CDMA Product Family - ParameterReference Guide - NodeB Parameters

Document number: NN-20500-027Document issue: 09.05Document status: PreliminaryProduct release: OAM06.0Date: September 2008

Copyright © 2001-2008 Alcatel-Lucent, All Rights Reserved

ALCATEL-LUCENT CONFIDENTIAL

UNCONTROLLED COPY: The master of this document is stored on an electronic database and is "writeprotected"; it may be altered only by authorized persons. While copies may be printed, it is notrecommended. Viewing of the master electronically ensures access to the current issue. Any hardcopiestaken must be regarded as uncontrolled copies.

ALCATEL-LUCENT CONFIDENTIAL: The information contained in this document is the property ofAlcatel-Lucent. Except as expressly authorized in writing by Alcatel-Lucent, the holder shall keep allinformation contained herein confidential, shall disclose the information only to its employees with a needto know, and shall protect the information from disclosure and dissemination to third parties. Except asexpressly authorized in writing by Alcatel-Lucent, the holder is granted no rights to use the informationcontained herein. If you have received this document in error, please notify the sender and destroy itimmediately.

Alcatel-Lucent, Alcatel, Lucent Technologies and their respective logos are trademarks and service marksof Alcatel-Lucent, Alcatel and Lucent Technologies.

All other trademarks are the property of their owners.

PUBLICATION HISTORYSYSTEM RELEASE OAM06.0

September 2008

Issue 09.05/EN Preliminary

Update after internal review

July 2008



April 2008

Issue 09.03/EN Draft

Update for Pre-DR4

April 2008



January 2008


Update/Creation for V6.0 April-08 portfolio content.

SYSTEM RELEASE: OAM05.2

November 2007

Issue 08.03/EN Standard

Update for DR5.

September 2007


Update after internal review.

August 2007


Publication history i

Copyright © 2001-2008 Alcatel-Lucent Alcatel-Lucent 9300 W-CDMA Product Family - ParameterReference Guide - NodeB Parameters

Update for OAM05.2

SYSTEM RELEASE: UMTS 5.1

July 2007

Issue 07.03/EN Standard

Update for UA 5.0 / OAM 5.1 Channel Readiness.

February 2007


Update after internal review.

Resolution of the following CR : Q01453022

November 2006


Update for OAM 5.1/UA 5.0 [UMTS 5.1]

The Publication History information for the outdated releaseshas been deleted.Document creation date: May 2004

Publication history ii

NN-20500-027 09.05 Preliminary September 2008 Copyright © 2001-2008 Alcatel-Lucent

1 About this publication................................................................................................................................................... 1

2 Object/Parameter description....................................................................................................................................... 4

3 Features Market Applicability....................................................................................................................................... 9

4 AAL2Bearer (AAL2Bearer).......................................................................................................................................... 11

5 AlcapBearer (AlcapBearer)..........................................................................................................................................15

6 AntennaAccess (AntennaAccess)..............................................................................................................................18

7 BTSCell (BTSCell)........................................................................................................................................................ 26

8 BTSEquipment (BTSEquipment)................................................................................................................................ 38

9 BTSEquipmentMIB (BTSEquipmentMIB)................................................................................................................... 98

10 BTSEquipmentSoftware (BTSEquipmentSoftware).............................................................................................. 101

11 BTSHsdpaResource (BTSHsdpaResource)...........................................................................................................103

12 Board (Board)........................................................................................................................................................... 105

13 CCP (CCP).................................................................................................................................................................112

14 Capacity (Capacity)..................................................................................................................................................115

15 CoolingSystem (CoolingSystem)............................................................................................................................120

16 CounterFamily (CounterFamily)..............................................................................................................................122

17 DeviceTable (DeviceTable)......................................................................................................................................125

18 EdchConf (EdchConf)..............................................................................................................................................129

19 EdchServiceParameterSet (EdchServiceParameterSet)...................................................................................... 143

20 ExtensionCabinet (ExtensionCabinet)................................................................................................................... 147

21 ExternalAlarm (ExternalAlarm)............................................................................................................................... 150

22 ExternalAlarms (ExternalAlarms)........................................................................................................................... 153

23 HsXpaResource (HsXpaResource).........................................................................................................................155

24 HsdpaConf (HsdpaConf)..........................................................................................................................................158

25 HsdpaMaxUeCategoryCapabilityActivation (HsdpaMaxUeCategoryCapabilityActivation).............................. 173

26 HsdpaUeCategoryTransportBlockOptimisation (HsdpaUeCategoryTransportBlockOptimisation)................ 179

27 HsdschServiceParameterSet (HsdschServiceParameterSet)..............................................................................186

28 ImaGroup (ImaGroup)..............................................................................................................................................191

29 InventoryComponent (InventoryComponent)........................................................................................................194

30 IpInterface (IpInterface)............................................................................................................................................199

31 IpRan (IpRan)............................................................................................................................................................202

32 LocalCellGroup (LocalCellGroup).......................................................................................................................... 206

33 NATP (NATP)............................................................................................................................................................ 211

34 NatpTable (NatpTable)............................................................................................................................................. 214

35 NodeBCP (NodeBCP)...............................................................................................................................................217

Table of contents iii


36 OMCBConnection (OMCBConnection).................................................................................................................. 220

37 PCM (PCM)................................................................................................................................................................223

38 PaResource (PaResource)...................................................................................................................................... 226

39 PaResourceRRH (PaResourceRRH).......................................................................................................................228

40 PassiveComponent (PassiveComponent)............................................................................................................. 230

41 PowerSystem (PowerSystem).................................................................................................................................237

42 Qaal2Params (Qaal2Params).................................................................................................................................. 239

43 R99Resource (R99Resource)..................................................................................................................................244

44 RadiusParameters (RadiusParameters).................................................................................................................246

45 RemoteRadioHead (RemoteRadioHead)................................................................................................................249

46 RfCarrier (RfCarrier).................................................................................................................................................256

47 RouteCes (RouteCes).............................................................................................................................................. 259

48 RtObsSession (RtObsSession)...............................................................................................................................264

49 SaalUniParams (SaalUniParams)............................................................................................................................267

50 SiteLan (SiteLan)......................................................................................................................................................271

51 UserAlarm (UserAlarm)............................................................................................................................................274

52 UserAlarms (UserAlarms)........................................................................................................................................277

53 VCC (VCC).................................................................................................................................................................279

54 Index of Customer Parameters............................................................................................................................... 287

55 Index of Manufacturer Parameters......................................................................................................................... 301

Table of contents iv


1 About this publicationThis document provides the RAN Model information and a list of the user accessible UMTS AccessNetwork configuration parameters.

Applicability

This publication applies to OAM06.0 System Release.

Audience

This document is intended for installation, operation, engineering and validation personnel, and anyother user who wants to know more about the UTRAN configuration parameters.

Prerequisites

It is recommended that readers become familiar with the following technical documents :

• Alcatel-Lucent 9353 Management System - System Overview (NN-20500-031)

How this publication is organized

This document is organized as follows:

• Volume 1: RAN Model Information

— RAN Model diagrams

— UTRAN dimensioning

— Online Creation/Deletion for Objects

— Adornments

• Volume 2: CNode Parameters

— Parameter description

— List of parameters per object

— Index of customer parameters

— Index of manufacturer parameters

• Volume 3: INode Parameters





• Volume 4: NodeB Parameters


1





• Volume 5: Micro NodeB Parameters





• Volume 6: OneBTS Parameters





• Volume 7: OAM Parameters





• Volume 8: POC7K Parameters





• Volume 9: POC15K Parameters





Vocabulary conventions

For a list of UMTS terms used in the publication, refer to the Alcatel-Lucent 9300 W-CDMA ProductFamily - Terminology publication.

2


Roadmap to UTRAN documentation

For collection roadmaps information, see Alcatel-Lucent 9300 W-CDMA Product Family - DocumentCollection Overview and Update Summary (NN-20500-050).

3


2 Object/Parameter descriptionThis section gives the description of customer available objects and parameters.

Introduction

Parameters belong to a containing object. Object descriptions can be found in the first volume.

In the volumes 2 to 9, the parameters are grouped by Network Element: CNode, INode, NodeB,OAM, POC7K, POC15K (each volume is dedicated to 1 Network Element) and by containing object(those objects being alphabetically sorted for each Network Element).

For further information on the parameters network engineering, please contact your AccountManager who will support you into getting the UTRAN Parameters User Guide (UPUG) issued byAlcatel-Lucent Wireless Network Engineering group.

Object description

Each object is presented as follows: Unique Name (Name).

RNC objects have a unique name different from their name.

NodeB and OAM objects have a unique name equal to their name.

In each volume (from volume 2 to 9), the objects are sorted by alphabetical order according to theirUnique Name.

For each object, the following general information are presented:

• presence: the value of this field can be "optional" or "required"

• onlineCreation: the value of this field can be "AllowedWithParent" or "Allowed" or "NotAllowed".

• onlineDeletion: the value of this field can be "AllowedWithParent" or "Allowed" or "NotAllowed".

• verbs: the value of this field can be "add" or/and "delete", and it is used for Passportprovisioning.

• parents: this field gives the list of the containing objects

• children: this field gives the list of the contained objects

• identifiers: this field gives the list of the identifiers, and for each one, the correspondingIDcategory, IDqualifier, IDscope, Mininstances, Maxinstances as follows:

Name IDcategory IDqualifier IDscope Mininstances Maxinstances

Parameter description

For each parameter, the following fields are presented:

• parameter name

4


• domain: the three kinds of domains are:

— RNC: parameters are part of the RNC MIB definition and are hosted by WMS OAM andNetwork Element RNC

— BTS: parameters are part of the BTS MIB definition and are hosted by WMS OAM andNetwork Element BTS

— IN: parameters are part of the Inode MIB definition and are hosted by WMS OAM andNetwork Element Inode

— AN: parameters are part of the Anode MIB definition and are hosted by WMS OAM andNetwork Element Anode

— OAM: parameters are part of the WMS OAM MIB definition and are hosted by WMS OAMonly. Its are not declared in any Network Element MIB, so its are not mediated by buildfunction and not checked by audit function.

• description: the parameter definition

• class: the five kinds of class are:

— 0: The parameter cannot be modified and a new object instance must be created with therequested parameter value thanks to build process or on line command.

— 1: The object instance does not need to be locked to modify the parameter and themodification will be taken into account after the NE has restarted.

— 2: The object instance (or one of the parent object instance) must be locked to modify theparameter and the modification will be taken into account after the object instance (or theparent object instance) has been unlocked.

— 3: So called "on-line parameter definition". The object instance does not need to be locked tomodify the parameter and the modification will immediately be taken into account with noimpact on the service availability.

— READ ONLY: The "read only" parameters can only be displayed.

• presence: indicates if the configuration of the parameter is optional.

• visibility

Customer parameter accessible for the customer (read/write or read only)

Manufacturer Alcatel-Lucent defines these parameters and they are not accessible forcustomer

Customer Re-stricted

parameters that can be modified by the customer, but it is strongly recom-mended to set them according to Alcatel-Lucent specification as their modi-fications can have performance impacts on WMS

• data type: decimal, integer, float, boolean, etc.

• unit: the measurement unit of the value range, when applicable.

Unit

%

5


#s

ms

byte/s

cells/sec

dB

dBm

deg

h

Kb

km

meter

MHz

min

ms

number of cells

s

W

• range: the parameter value range. For example:

— Float: min = -35, max = 15, step = 0.1

— Enum (AdministrativeState): locked (0), unlocked (1), shuttingdown (2)

— String: length = 40 (Hex)

— Integer: min = 0, max = nRouteSet-1

• initial value: the value of a new parameter is [#false#] or [#null#] or [x]. This value is used:

— either when a customer wants to ensure the same performances before a UTRAN releaseupgrade

— or when a customer wants to deactivate a function

• def value comments

• recommended value: this value is recommended by Alcatel-Lucent for new networks roll outbefore the optimization. The recommended values take benefit of the performance ofAlcatel-Lucent UTRAN feature. For installed networks, the value to set depends on the chosenoptions or rules defined by the customer.

• rec val comments

Index description

At the end of each volume (from volume 2 to volume 9), two indexes are available summarizing allthe parameters presented in the concerned volume:

6


• an index for the customer parameters

• an index for the manufacturer parameters

These two indexes list the parameters by category (standard, inventory, states and status, dynamicdata, I&C) and by object sorted by alphabetical order, as follows:

• standard parameters

— Object A

– Parameter AA

– Parameter AB

– Parameter AC

— Object B

– Parameter BA

– Parameter BB

• inventory parameters

— Object A

– Parameter AD

– Parameter AE

— Object C

– Parameter CA

– Parameter CB

– Parameter CC

• states and status parameters

— Object A

– Parameter AF

– Parameter AG

– Parameter AH

— Object B

– Parameter BC

• dynamic data parameters

— Object D

– Parameter DA

– Parameter DB

– Parameter DC

• I&C parameters

— Object B

7


– Parameter BD

– Parameter BE

– Parameter BF

8


3 Features Market ApplicabilityThis chapter presents a global view of the V6.0 Features included in this document.

For each feature, the title and the market applicability are detailed.

Note: Only the V6 features are listed in this table. If a feature Id introduced in a counter'sdescription has no entry in this table, this feature comes from an old features load.

FRS Id FRS Title Visible andapplicable toall GlobalMarket (GM)

Visible andapplicable toKorean Cus-tomers

Visible andapplicable toATT

16746 Node B capacity licensing Yes No No

20601 STSR2+2 and STSR2+1 NodeBconfigurations

Yes Yes No

24831 iBTS Inventory enhancement Yes No No

28018 3GPP compliant Iub: Alcap Yes Yes Yes

28419 Dual-band NodeB Yes No No

29804 GBR on HSDPA (xCEM // Stream-ing Rabs)

Yes No Yes

29804 GBR on HSDPA ( iCEM // Conges-tion + Iur )

Yes No No

29808 Multi-carrier PA Power Pooling Yes Yes No

32076 E-DCH Macro Diversity Support(xCEM)

Yes Yes Yes

32076 E-DCH Macro Diversity Support(iCEM)

Yes Yes No

32076 E-DCH Macro Diversity Support(xCEM, full content)

Yes Yes Yes

33278 Node B Security Evolution forUA06 (Banner Management)

Yes Yes No

33278 Node B Security Evolution forUA06 (Support of Radius onXCCM)

Yes Yes No

33327 Mac-e Scheduler enhancements(incl. 2ms TTI) (xCEM)

Yes Yes Yes

33327 Mac-e Scheduler enhancements(incl. 2ms TTI) (iCEM)

Yes Yes No

33332 Iub bandwidth limitation for E-DCH (xCEM)

Yes Yes No

33332 Iub bandwidth limitation for E-DCH (iCEM)

Yes Yes No

33334 Hybrid IP/Ethernet and ATM/E1 Iub Yes Yes No

9


support on xCCM

33367 HSPA congestion detection andnotification (xCEM)

Yes Yes No

33367 HSPA congestion detection andnotification (iCEM)

Yes Yes No

33390 HS-DSCH BLER Target Adjust-ment (xCEM)

Yes No No

33390 HS-DSCH BLER Target Adjust-ment (iCEM)

Yes No No

33391 HS-DSCH Power Adjustment Evol-ution (xCEM)

Yes No No

33391 HS-DSCH Power Adjustment Evol-ution (iCEM)

Yes No No

33602 15 min Node-B counters Yes Yes No

33694 Fair sharing of resources : HSDPAvs. DCH (xCEM // RNC: w/o GBR)

Yes No Yes

33694 Fair sharing of resources : HSDPAvs. DCH (iCEM // RNC: full feature)

Yes No No

33968 NAT-P enhancement (xCCM) Yes Yes No

33968 NAT-P enhancement (iCCM) Yes Yes No

33970 6 sectors softer HO (XCEM) Yes Yes No

33970 6 sectors softer HO (iCEM) Yes Yes No

33970 6 sectors softer HO (RNC5.0Amerge)

Yes Yes No

34102 Flexible HSDPA modulation usageversus codes (iCEM)

Yes Yes No

34134 High RSSI Node-B alarm Yes Yes No

34159 STSR3 Node-B configuration Yes No No

34177 IMA Defense support for Alcap Iub No No Yes

10


4 AAL2Bearer (AAL2Bearer)

The general information on this object are:

• Presence: optional

• OnLineCreation: Allowed

• OnLineDeletion: NotAllowed

Parents:

BTSEquipment - AAL2Bearer

Child(ren):

-

Identifiers:

Name IDcategory IDqualifier IDscope MinIn-stances

MaxIn-stances

rdnId relative primary none 0 32

Links:

Source attribute Target Object Target Attribute

vccId VCC

Parameters:

rdnId

Parameter name rdnId

Domain OAM

Description AAL2Bearer identifier. IuxIfPath,IuxIf shall first bedeleted on RNC before AAL2Bearer instance onBTS.

Class NA

Presence required

Visibility customer

Unit

Range [0..31]

11


Data Type Decimal

Initial Value

availabilityStatus

Parameter name availabilityStatus

Domain BTS

Description X731 OSI State

Class NA

Presence required

Visibility customer

Range inTest, failed, powerOff, offLine, offDuty, depend-ency, degraded, notInstalled, logFull

Data type Variable[9] List of Enumeration

Initial value N.A.

localBlockingState

Parameter name localBlockingState

Domain BTS

Description This is the local blocking state of the AAL2 BEAR-ER * Unblocked: the BTS has unblocked the AAL2BEARER * Blocked: the BTS has blocked the AAL2BEARE

Class NA

Presence required

Visibility customer

Range disabled, enabled

Data type Enumeration

Initial value enabled

Rel version comments Release Version Warning: parameter not used bythe system in this release version. It must not be setif optional, or set to its default value if mandatory.

operationalState

Parameter name operationalState

Domain BTS


Class NA

12


Presence required

Visibility customer




pathId

Parameter name pathId

Domain BTS

Description The identifier of the AAL type 2 path. AAL type 2Path: An ATM VCC between two AAL type 2 nodes.

Class 0

Presence required

Visibility customer

Range [1..2147483647]

Data type Decimal

Initial value N.A.

remoteBlockingState

Parameter name remoteBlockingState

Domain BTS

Description This is the remote blocking state of the AAL2BEARER * Unblocked: the peer entity has un-blocked the AAL2 BEARER * Blocked: the peer en-tity has blocked the AAL2 BEARER

Class NA

Presence required

Visibility customer

Range unblocked, blocked


Initial value N.A.


userSpecificInfo

Parameter name userSpecificInfo

13


Domain OAM

Description information field reserved to the user. No specifictreatment on this field is performed by the system.

Class NA

Presence optional

Visibility customer

Range [0..30]

Data type AsciiString

Initial value N.A.

vccId

Parameter name vccId

Domain BTS

Description rdn Identifier of the VCC object used for this link.

Class 0

Presence required

Visibility customer

Range VCC

Data type ServiceLink

Initial value N.A.

14


5 AlcapBearer (AlcapBearer)




• OnLineDeletion: Allowed

Parents:

BTSEquipment - AlcapBearer

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


vccId VCC

Parameters:

rdnId


Domain BTS

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..0]

Data Type Decimal

15


Initial Value

availabilityStatus


Domain BTS

Description X.731 This parameter is a set of 0 or more of thefollowing values: *

Class NA

Presence required

Visibility customer



Initial value N.A.

operationalState


Domain BTS

Description X.731 It represents the ALCAP operability. This at-tribute has two values:

Class NA

Presence required

Visibility customer




userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

16


vccId


Domain BTS

Description This is the VCC RDN used by this ALCAP BEARER

Class 0

Presence required

Visibility customer

Range VCC


Initial value N.A.

17


6 AntennaAccess (AntennaAccess)


• Presence: required

• OnLineCreation: NotAllowed


Parents:

BTSEquipment - AntennaAccess

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


antennaSystemRef Site Sector AntennaSystem

Parameters:

rdnId


Domain BTS

Description AntennaAccess identifier,

Class NA

Presence required

Visibility customer

Unit

Range [0..14]

Data Type Decimal

18


Initial Value

antennaConnection

Parameter name antennaConnection

Domain BTS

Description Identifies the physical antenna connection on theDDM of the BTS, One antenna connection is re-lated to a main and a diversity antenna.

Class 0

Presence required

Visibility customer

Range antennaConnection_1, antennaConnection_2, an-tennaConnection_3, antennaConnection_4, anten-naConnection_5, antennaConnection_6, anten-naConnection_11, antennaConnection_12, anten-naConnection_13, antennaConnection_14, anten-naConnection_15, antennaConnection_16, anten-naConnection_21, antennaConnection_22, anten-naConnection_23, antennaConnection_24, anten-naConnection_25, antennaConnection_26, anten-naConnection_31, antennaConnection_32, anten-naConnection_33, antennaConnection_34, anten-naConnection_35, antennaConnection_36, anten-naConnection_41, antennaConnection_51, anten-naConnection_61, antennaConnection_101, anten-naConnection_102, antennaConnection_103, an-tennaConnection_1011, antennaConnection_1021,antennaConnection_1031, antennaConnec-tion_1041, antennaConnection_1051, antennaCon-nection_1061


Initial value N.A.

Rec val comments In STSR1 configuration it

antennaSystemRef

Parameter name antennaSystemRef

Domain OAM

Description Reference of the associated AntennaSystem.

Class NA

Presence optional

Visibility customer

19


Range Site Sector AntennaSystem


Initial value N.A.

availabilityStatus


Domain BTS

Description X731 OSI state

Class NA

Presence required

Visibility customer



Initial value N.A.

cellPlanningId

Parameter name cellPlanningId

Domain OAM

Description Pointer to the related FDDCell

Class NA

Presence optional

Visibility customer

Range NA


Initial value N.A.

externalAttenuationDivDl

Parameter name externalAttenuationDivDl

Domain BTS

Description This parameter is a rename of attenuationFeeder-Div External loss between the Cabinet and the Di-versity antenna to be taken into account for down-link.

Class 0

Presence required

20


Visibility customer

Unit dB

Range [0.0..50.0] step:0.1

Data type Decimal

Initial value 0

externalAttenuationDivUl

Parameter name externalAttenuationDivUl

Domain BTS

Description External loss between the Cabinet and the Diversityantenna to be taken into account for uplink.

Class 0

Presence required

Visibility customer

Unit dB

Range [0.0..50.0] step:0.1

Data type Decimal

Initial value 0

externalAttenuationMainDl

Parameter name externalAttenuationMainDl

Domain BTS

Description This parameter is a rename of attenuationFeeder-Main External loss between the Cabinet and theMain antenna to be taken into account for downlink.

Class 0

Presence required

Visibility customer

Unit dB

Range [0.0..50.0] step:0.1

Data type Decimal

Initial value 0

externalAttenuationMainUl

Parameter name externalAttenuationMainUl

Domain BTS

21


Description External loss between the Cabinet and the Main an-tenna to be taken into account for uplink.

Class 0

Presence required

Visibility customer

Unit dB

Range [0.0..50.0] step:0.1

Data type Decimal

Initial value 0

externalDlDelay

Parameter name externalDlDelay

Domain BTS

Description This parameter represent the Downlink delay fromthe BTS RF output to the antenna

Class 0

Presence required

Visibility customer

Unit ns

Range [0.000..2080.000] step:8.125

Data type Decimal

Initial value 121.875

Def value comments Default value = 121,875 when tmaAccessType =tmaUmtsOnly 2100 Default value = 113,75 whentmaAccessType = NoTma Default value = 211,25when tmaAccessType = tmaMix Default value =138,125 when tmaAccessType = tmaUmtsOnly1900

externalUlDelay

Parameter name externalUlDelay

Domain BTS

Description This parameter represent the Uplink delay from theantenna to the BTS RF input

Class 0

Presence required

Visibility customer

Unit ns

22


Range [0.000..2080.000] step:8.125

Data type Decimal

Initial value 154.375

Def value comments Default value = 154,375 when tmaAccessType =tmaUmtsOnly 2100 Default value = 113,75 whentmaAccessType = NoTma Default value = 325when tmaAccessType = tmaMix Default value =195 when tmaAccessType = tmaUmtsOnly 1900

operationalState


Domain BTS

Description X731 - OSI state This attribute has two values: -

Class NA

Presence required

Visibility customer




retPresence

Parameter name retPresence

Domain OAM

Description This parameter indicates if a RET device is presentor not for this antennaAccess

Class NA

Presence required

Visibility customer

Range false, true


Initial value false

rxCabling

Parameter name rxCabling

Domain BTS

Description This parameter indicates how the BTS is cabled tothe antenna for reception path. In UA04.1, only the

23


default value is supported.

Class 0

Presence required

Visibility customer

Range mainInputOnly, diversityInputOnly, mainAndDi-versityInput


Initial value mainAndDiversityInput


tmaAccessType

Parameter name tmaAccessType

Domain BTS

Description Enumerated indicating if a TMA (Tower Mastheadamplifier) is present and if so, the type of TMA.

Class 0

Presence required

Visibility customer

Range noTma, tmaUmtsOnly, tmaMix


Initial value N.A.

Rec val comments noTma

userSpecificInfo


Domain OAM


Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

24


25


7 BTSCell (BTSCell)





Parents:

BTSEquipment - BTSCell

Child(ren):

EdchConf - HsdpaConf -

Identifiers:


MaxIn-stances

localCellId absolute secondary none 1 12


MaxIn-stances


Links:


hsxpaResourceId HsXpaResource

paResourceId PaResource

associatedFDDCell RNC NodeB FDDCell

Parameters:

localCellId

Parameter name localCellId

Domain BTS

Description TS 25.401(release 1999) The Local cell Identifier isused to uniquely identify the set of resources within

26


a node B required to support a cell (as identified bya C-Id). It supports uniqueness within the UTRANfor management system purposes. The Local cellIdentifier is used for the initial configuration of aNode B when no C-Id is defined. The Local cellIdentifier is defined by the operator and set in bothNode B and its C-RNC via O&M.

Class 0

Presence required

Visibility customer

Unit

Range [0..268435455]

Data Type Decimal

Initial Value

rdnId


Domain OAM

Description BTSCell identifier. relative distinguish name Iden-tity: identifies the BTS cell within its BTS Equipment

Class NA

Presence required

Visibility customer

Unit

Range [0..12]

Data Type Decimal

Initial Value

antennaConnectionList

Parameter name antennaConnectionList

Domain BTS

Description List of AntennaAccess object identifiers For ex-ample:In STSR : 1 AntennaAccess, In OTSR with 6antennas : 3 AntennaAccess

Class 0

Presence required

Visibility customer

Range AntennaAccess

27


Data type Variable[3] List of ServiceLink

Initial value N.A.

associatedFDDCell

Parameter name associatedFDDCell

Domain OAM

Class NA

Presence required

Visibility manufacturer

Range RNC NodeB FDDCell


Initial value N.A.

cellPlanningId

Parameter name cellPlanningId

Domain OAM

Description Pointer to the related FDDCell

Class NA

Presence optional

Visibility customer

Range NA


Initial value N.A.

cellProfile

Parameter name cellProfile

Domain BTS

Description Profile of the cell. This parameter is used to provi-sion future BTS algorithm depending on the cellprofile. In UA04.1, only default value is supported.Possible values are: 0: NOT CONFIGURED 1:TU_3 2: TU_50 3: TU_120 13: RA_120 14: RA_25023: HT_120 Coding 10a + b a = TU (0) or RA (1) orHT (2) b = 3km/h (1) or 50 km/h (2) or 120 km/h (3)or 250 km/h (4) The different model are extractedfrom 3GPP TS 25.943 TU_x = Typical Urban x km/hRA_x = Rural Area x km/h HT = Hilly Terrain x km/h

28


Class 3

Presence required

Visibility customer

Range notConfigured, typicalUrban3kmh, typicalUrb-an50kmh, typicalUrban120kmh, ruralArea120kmh,ruralArea250kmh, hillyTerrain12kmh


Initial value notConfigured


cellSize

Parameter name cellSize

Domain BTS

Description Represents the size of the cell.

Class 0

Presence required

Visibility customer

Unit km

Range from0to5, from5to10, from10to30, from30to60,from60to75, from75to90, from90to120,from120to150


Initial value from5to10

dynamicPersistenceLevel

Parameter name dynamicPersistenceLevel

Domain BTS

Description dynamicPersistenceLevel used by the BTS in theSIB 7 as defined in 3GPP TS 25.331.

Class 3

Presence required

Visibility customer

Range [1..8]

Data type Decimal

Initial value 1

29


edchResourceActivation

Parameter name edchResourceActivation

Domain BTS

Description This parameter activates the allocation of EDCH re-sources for this BTS CELL. * FALSE: no EDCH re-source is allocated for this BTS CELL * TRUE:EDCH resource can be allocated for this BTS CELL(CF parameter EDCH CONF::edchResourceId)This parameter shall be set to FALSE when thechild object EDCH CONF is not present.

Class 0

Presence required

Visibility customer

Range false, true


Initial value false

equipmentMapping

Parameter name equipmentMapping

Domain BTS

Class NA

Presence optional

Visibility customer

Range [Board..Board]

Data type

Initial value N.A.

hsdpaResourceActivation

Parameter name hsdpaResourceActivation

Domain BTS

Description This parameter activates the allocation of HSDPAresources for this BTS CELL. FALSE: no HSDPAresource is allocated for this BTS CELL TRUE: HS-DPA resource can be allocated for this BTS CELL(CF parameter HSDPA CONF::hsdpaResourceId)This parameter shall be set to FALSE when thechild object HSDPA CONF is not present.

Class 0

30


Presence required

Visibility customer

Range false, true


Initial value false

hsxpaResourceId

Parameter name hsxpaResourceId

Domain BTS

Class 0

Presence required

Visibility customer

Range HsXpaResource


Initial value N.A.

localCellGroupId

Parameter name localCellGroupId

Domain BTS

Description A localCellGroup is a group of local cells of a iBTSassociated with the same carrier.

Class 0

Presence required

Visibility customer

Range [0..3]

Data type Decimal

Initial value N.A.

maximumPowerAmplification

Parameter name maximumPowerAmplification

Domain OAM

Description V4.3K - change to reducedMode(30),fullMode(45)Maximum Authorized power amplification of the PAInteger: Possible values (for current iBTS) are: (30):reducedMode (30 W: PA reduced mode) (45): fullM-ode (45 W: PA full mode) default value = fullModereducedMode means that the Power Amplifier for

31


this cell is used in Reduced mode. This mode cor-responds to the following amplification: 30W for Inmulti-frequency configuration, All BTS Cell connec-ted to the same antennaAccessList and pointing tothe same LOC-AL_CELL_GROUP::frequencyGoupId shall be con-figured with the same maxPowerAmplification(these BTS Cell shares the same PA) Note: 45 WfullMode value is not supported on Mono IBTS with1st generation PA and Street iBTS with 3 PA (3sectors) with 1st generation PA Not used : replaceby paResource.maxPowerAmplification

Class NA

Presence required

Visibility customer

Unit W

Range reducedMode, fullMode


Initial value fullMode

paRatio

Parameter name paRatio

Domain BTS

Description Percentage of PA power associated with this BTScell. The maximum power declared for each BTSCell to the RNC will be : Max DL power capability =(PaRatio /100 * PA Max power capability) + Txlosses. This max power will be shared between allBTS cells with same frequency group in one sector

Class 0

Presence required

Visibility customer

Unit %

Range [10..100]

Data type Decimal

Initial value 50

paResourceId

Parameter name paResourceId

Domain BTS

32


Description Instance of the PaResource associated to the BTS-Cell.

Class 0

Presence optional

Visibility customer

Range PaResource


Initial value N.A.

pmmActivation

Parameter name pmmActivation

Domain BTS

Description This parameter is used to activate the PMM Ex-cessive Power Algorithm

Class 0

Presence required

Visibility customer

Range false, true


Initial value false


rssiHighAlarmThreshold

Parameter name rssiHighAlarmThreshold

Domain BTS

Class 3

Presence optional

Visibility customer

Unit dBm

Range [-150.0..-50.0] step:0.1

Data type Signed

Initial value -90.0

rssiUnbalancedMainDivThreshold

33


Parameter name rssiUnbalancedMainDivThreshold

Domain BTS

Class 3

Presence optional

Visibility customer

Unit dBm

Range [1.0..20.0] step:0.1

Data type Decimal

Initial value N.A.

rtwpMargin

Parameter name rtwpMargin

Domain BTS

Description This parameter is added to the parameter RTWP-max given by RNC to obtain the maximum RTWPlimit for which the eDCH system can work properlywithout any major problem

Class 3

Presence required

Visibility customer

Unit dB

Range [0.5..2.0] step:0.5

Data type Decimal

Initial value 2

Recommended value 2

rtwpMaxCellLoadCacActivation

Parameter name rtwpMaxCellLoadCacActivation

Domain BTS

Description This parameter is used to activate the UL CAC onnon-EDCH traffic at BTS based on the RTWP

Class 3

Presence required

Visibility customer

Range false, true


34


Initial value false

rtwpMaxCellLoadNonEdch

Parameter name rtwpMaxCellLoadNonEdch

Domain BTS

Description RTWP load used to perform UL CAC for all trafficexcept EDCH based on the RTWP. This parameteris used only if rtwpMaxCellLoadCacActivation is setto TRUE. In this case, the CAC will accept rence isthe RTWP learned if the parameter IsRtwpRefer-enceSelfLearning is set to TRUE.

Class 3

Presence required

Visibility customer

Unit %

Range [0..100]

Data type Decimal

Initial value 50

rtwpReference

Parameter name rtwpReference

Domain BTS

Description Reference of RTWP when the BTS does not re-ceive any radio signal for this cell. If the parameterisRtwpReferenceSelfLearning is set to TRUE, thisparameter is only used to initiate the RTWP selflearning feature.

Class 3

Presence required

Visibility customer

Unit dBm

Range [-115.0..-50.0] step:0.1

Data type Signed

Initial value -106.1

rtwpTimeDetection

Parameter name rtwpTimeDetection

35


Domain BTS

Description This parameter is relative to the maximum time forwhich the eDCH system is authorized to workabove the RTWP limit defined by RTWPmax +RTWPmargin

Class 3

Presence required

Visibility customer

Unit ms

Range [100..400] step:100

Data type Decimal

Initial value 400

Recommended value 400

transportFiberDelay

Parameter name transportFiberDelay

Domain BTS

Class 0

Presence required

Visibility customer

Unit tChips

Range noFiber, 77, 134, 192, 384


Initial value noFiber

userSpecificInfo


Domain OAM


Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

36


37


8 BTSEquipment (BTSEquipment)





Parents:

-

Child(ren):

AAL2Bearer - AlcapBearer - AntennaAccess - Board - BTSCell - BTSEquipmentMIB -BTSEquipmentSoftware - BTSHsdpaResource - Capacity - CCP - CoolingSystem - CounterFamily -ExtensionCabinet - ExternalAlarms - HsXpaResource - ImaGroup - InventoryComponent -IpInterface - IpRan - LocalCellGroup - NATP - NodeBCP - OMCBConnection - PaResource -PassiveComponent - PCM - PowerSystem - Qaal2Params - R99Resource - RadiusParameters -RemoteRadioHead - RfCarrier - RouteCes - RtObsSession - SaalUniParams - SiteLan - UserAlarms- VCC -

Identifiers:


MaxIn-stances

neId relative secondary none 0 *


MaxIn-stances

rdnId relative secondary none 0 *


MaxIn-stances

userLabel absolute primary none 0 *

Links:


associatedNodeB RNC NodeB

clusterId Cluster

pmClusterId PMCluster

38


siteName Site

Parameters:

neId

Parameter name neId

Domain OAM

Description This attribute is used to perform the connectionbetween the installed BTS and the OMC provi-sionned BTS equipment.

Class NA

Presence required

Visibility customer

Unit

Range [0..25]

Data Type AsciiString

Initial Value

rdnId


Domain BTS

Description BTSEquipment identifier

Class NA

Presence required


Unit

Range [0..65534]

Data Type Decimal

Initial Value

userLabel

Parameter name userLabel

Domain OAM

Description user friendly BTSEquipment name, for operator useonly (at MMI)

Class NA

39


Presence required

Visibility customer

Unit

Range NA

Data Type AsciiString

Initial Value

CCLTimeout

Parameter name CCLTimeout

Domain BTS

Description When a CEM board supporting common channelsbecomes in fault, OAM software notifies RNC thatthe associated cell is disabled. Then OAM softwarewaits for this time laps to ask RNC for reconfigura-tion. Supported values: noCommonChannel-LossTimeout= immediate reconfiguration, priority isput on coverage (restore the cell enabled as soonas possible) commonChannelLossTimeout = give achance to the CEM board to appear, so that the re-configuration will occur on this board; priority is puton capacity Note that If CEM supports also E-BBUthen cclTimeout is hardcoded to commonChannel-LossTimeout (ie 3 min) value.

Class 3

Presence required

Visibility customer

Unit min

Range noCommonChannelLossTimeout, commonChan-nelLossTimeout


Initial value commonChannelLossTimeout

Def value comments Note that If CEM supports also E-BBU thencclTimeout is hardcoded to commonChannel-LossTimeout (ie 3 min) value.

OAMProtocol

Parameter name OAMProtocol

Domain BTS

Description Protocol used betwen OMC-B and node B

Class 0

40


Presence required


Range SEPE, TROL


Initial value TROL

OAMProtocolVersion

Parameter name OAMProtocolVersion

Domain BTS

Description The protocol release: 32 for TROL3 release 2, 10pour 1.0

Class NA

Presence required


Range [0..2147483647]

Data type Decimal

Initial value N.A.

OAMlinkAdministrativeState

Parameter name OAMlinkAdministrativeState

Domain OAM

Description Represents the administrative state of the linkbetween the OMC and the BTS (or NodeB).

Class NA

Presence required

Visibility customer

Range locked, unlocked


Initial value locked

alcapActivation

Parameter name alcapActivation

Domain BTS

Description This parameter is used to activate ALCAP manage-ment for call processing

Class 0

41


Presence required

Visibility customer

Range false, true


Initial value true

alcapBasedIMADefenseActivation

Parameter name alcapBasedIMADefenseActivation

Domain BTS

Description This parameter is used to activate management ofIMA defense based on ALCAP. false: IMA defenseis managed without ALCAP and relies on parameterIMA GROUP::imaDefenseDelay true: IMA defenseis activated and is managed with ALCAP proced-ures

Class 3

Presence required

Visibility customer

Range false, true


Initial value false

alcapBasedIMADefenseDelay

Parameter name alcapBasedIMADefenseDelay

Domain BTS

Description This parameter is the delay before reporting the endof PCM failure to the RNC when alcap-BasedIMADefenseActivation is set to TRUE. Value0 means no delay.

Class 3

Presence required

Visibility customer

Unit s

Range [0..300]

Data type Decimal

Initial value 30

42


aliasName

Parameter name aliasName

Domain OAM

Class NA

Presence optional

Visibility customer

Range NA

Data type UnicodeString

Initial value N.A.

alphaParameter

Parameter name alphaParameter

Domain BTS

Description Number of consecutive ICP cells (IMA control pro-tocol cells) invalid to be detected to consider thegroup as de-synchronized

Class 0

Presence required


Range icpCellInvalid1, icpCellInvalid2


Initial value N.A.

Def value comments 2 factory value

antennaFaultDetectionActivation

Parameter name antennaFaultDetectionActivation

Domain BTS

Description This parameter is used to activate the antennaFault detection algorithm TRUE: algorithm is activ-ated FALSE: algorithm is deactivated In UA04,1,only the default value is supported.

Class 0

Presence required

Visibility customer

Range false, true


Initial value false

43



antennaFaultMaxCounter

Parameter name antennaFaultMaxCounter

Domain BTS

Description This parameter is used to configure the algorithmused for antenna failure detection in particular forthe confirmation of the antenna failure. The antennafailure is confirmed when the antenna failurecounter reaches this value

Class 0

Presence required

Visibility customer

Range [10..500]

Data type Decimal

Initial value 100


antennaPowerMinSamples

Parameter name antennaPowerMinSamples

Domain BTS

Description This parameter is used to configure the algorithmused for antenna failure detection. It indicates theMinimum number of samples, used to process theantenna main/diversity measurements

Class 0

Presence required

Visibility customer

Range [100..20000]

Data type Decimal

Initial value 1000


44


antennaThreshold

Parameter name antennaThreshold

Domain BTS

Description This attribute is used to detect if the BTS antenna isfailed

Class 0

Presence required

Visibility customer

Unit dB

Range [1..100]

Data type Decimal

Initial value 6

associatedNodeB

Parameter name associatedNodeB

Domain OAM

Description Pointer to the NodeB corresponding to that BT-SEquipment

Class NA

Presence required


Range RNC NodeB


Initial value N.A.

asyncLine2InterfaceUsage

Parameter name asyncLine2InterfaceUsage

Domain BTS

Description This parameter indicates how to use the 2nd serialinterface of the GPSAM. Note: The only supportedvalue is 0

Class 0

Presence required

Visibility customer

Range LineNotUsed, DVBH_OAM_Connection


45


Initial value LineNotUsed

automaticUpgrade

Parameter name automaticUpgrade

Domain OAM

Description - If set to version information coming from the Bts.

Class NA

Presence required

Visibility customer

Range enabled, disabled



availabilityStatus


Domain BTS


Class NA

Presence required

Visibility customer



Initial value N.A.

bbVersion

Parameter name bbVersion

Domain BTS

Class 3

Presence required

Visibility customer

Range [0..8]

Data type HexString

Initial value 0000FFFF

Rel version comments Release Version Warning: parameter not used by

46


the system in this release version. It must not be setif optional, or set to its default value if mandatory.

betaParameter

Parameter name betaParameter

Domain BTS

Description Number of errored consecutive ICP cells (IMA con-trol protocol cells) to be detected to consider thegroup as de-synchronized.

Class 0

Presence required


Range icpCellError1, icpCellError2, icpCellError3, icp-CellError4, icpCellError5


Initial value N.A.


btsLoginBannerText

Parameter name btsLoginBannerText

Domain BTS

Class 3

Presence optional

Visibility customer

Range [0..2048]


Initial value N.A.

callPCEMSlotNumber

Parameter name callPCEMSlotNumber

Domain BTS

Description If CallPCommissioningMode is set to commission-ingCallPMode then this parameter indicates theCEM board number on which the test should start.If CallPModeCommissioningMode is set to nomin-alMode then this parameter is not significant andshould be ignored. Should set before setting theCallPCommissioningMode

47


Class 3

Presence required

Visibility customer

Range [0..12]

Data type Decimal

Initial value 1

callPCommissionMode

Parameter name callPCommissionMode

Domain BTS

Description Represents the mode of resource allocation run byCallP. Possible values : nominalCallP, commission-ingCallP. It applies to the CallPCEMNumber, thisnumber should be set first.

Class 3

Presence required

Visibility customer

Range nominalCallPMode, commissioningCallPMode


Initial value nominalCallPMode

cellDegradedStateActivation

Parameter name cellDegradedStateActivation

Domain BTS

Description This parameter is used to activate managementand reporting (to RNC) of a BtsCell in state en-abled/degraded when HSDPA or/and EDCH servicefor a cell is disabled.

Class 3

Presence required

Visibility customer

Range false, true


Initial value false

clusterId

Parameter name clusterId

48


Domain OAM

Description Reference to its corresponding cluster for furtherdetails on the clusterId object please refers to UMT/OMC/DD/007615 V02/EN CM XML Format Descrip-tion

Class NA

Presence required

Visibility customer

Range Cluster


Initial value N.A.

cpriManagement

Parameter name cpriManagement

Domain BTS

Description This I&C parameter indicates if the RRH connectedto the BTS uses CPRI or not (HSSL) This paramet-er is only used by iCCM2 and iCCM-U. xCCM doesnot use this parameter

Class 0

Presence required


Range noCpi, cpriV2


Initial value N.A.

dhcpServerPresence

Parameter name dhcpServerPresence

Domain BTS

Description Indicates if there is a DHCP server available for thisBTS to find out OMC

Class 0

Presence required


Range false, true


Initial value N.A.

49


e1PcmFrame

Parameter name e1PcmFrame

Domain BTS

Class NA

Presence required


Range multiFrame, singleFrame, automatic


Initial value N.A.

Def value comments Multiframe is the factory state

ebbuAllocationPriority

Parameter name ebbuAllocationPriority

Domain BTS

Class 3

Presence required

Visibility customer

Range lowerAllHbbu, sameHbbu


Initial value lowerAllHbbu

edchBLIubBandwidth

Parameter name edchBLIubBandwidth

Domain BTS

Description edchBLIubBandwidth corresponding to the maxim-um bit rate that is supported in the Iub.

Class 3

Presence required

Visibility customer

Unit Kbits/s

Range [100..200000] step:100

Data type Decimal

Initial value 200000

50


edchBLMACdFlowTimer

Parameter name edchBLMACdFlowTimer

Domain BTS

Description edchBLMACdFlowTimer corresponds to the internaltimer to start or re-starts at each time the MAC-dflow status is set to ORANGE or RED. Typical valueis 500ms.

Class 3

Presence required

Visibility customer

Unit ms

Range [100..10000] step:100

Data type Decimal

Initial value 500

edchBLStepIncrease

Parameter name edchBLStepIncrease

Domain BTS

Description This parameter controls the increase applied to thereduction factor when Delay build up is detected.

Class 3

Presence required

Visibility customer

Range [0..100]

Data type Decimal

Initial value 10

edchBLStepReductionDelay

Parameter name edchBLStepReductionDelay

Domain BTS

Description When edchBLSupervisionTimer expires, and if theMAC-d flow is marked as not congested, the reduc-tion factor is increased by edchBLStepIncrease.

Class 3

Presence required

Visibility customer

Range [0..100]

51


Data type Decimal

Initial value 5

edchBLStepReductionFrameLoss

Parameter name edchBLStepReductionFrameLoss

Domain BTS

Description When edchBLSupervisionTimer expires, and if theMAC-d flow is marked as congested because ofdelay build up, the reduction factor is reduced byedchBLStepReductionDelay.

Class 3

Presence required

Visibility customer

Range [0..100]

Data type Decimal

Initial value 20

edchBLSupervisionTimer

Parameter name edchBLSupervisionTimer

Domain BTS

Description When edchBLSupervisionTimer expires, and if theMAC-d flow is marked as congested because offrame loss, the reduction factor is reduced by ed-chBLStepReductionFrameLoss.

Class 3

Presence required

Visibility customer

Unit ms

Range [10..1000] step:10

Data type Decimal

Initial value 100

edchCMActivation

Parameter name edchCMActivation

Domain BTS

Class 3

Presence required

52


Visibility customer

Range false, true


Initial value false

edchMaxNumberUserEbbu

Parameter name edchMaxNumberUserEbbu

Domain BTS

Description This parameter represents the Maximum number ofEDCHuser (logical channel) allowed per ed-chResource (E-BBU) 0 means maximum user al-lowed by software and hardware. If

Class 3

Presence required

Visibility customer

Range [0..65535]

Data type Decimal

Initial value 0

edchMaxNumberUserNodeB

Parameter name edchMaxNumberUserNodeB

Domain BTS

Description This parameter is obsolete.

Class 0

Presence required

Visibility customer

Range [0..65535]

Data type Decimal

Initial value 0

edchMaxNumberUserXcem

Parameter name edchMaxNumberUserXcem

Domain BTS

Description This parameter represents the Maximum number ofEDCH user (logical channel) allowed per XCEM. 0means maximum user allowed by software andhardware. If Capa-

53


city.edchNumberUserCapacityLicensing is not un-limited, then this parameter becomes useless.

Class 3

Presence required

Visibility customer

Range [0..128] step:16

Data type Decimal

Initial value 0

edchRateSchedulerOptimisationTimer

Parameter name edchRateSchedulerOptimisationTimer

Domain BTS

Class 3

Presence required

Visibility customer


Data type Decimal

Initial value 10

edchSchedulerAlgorithm

Parameter name edchSchedulerAlgorithm

Domain BTS

Class 3

Presence required

Visibility customer

Range roundRobinSlidingWindow, rateScheduling


Initial value rateScheduling

ftpPassword

Parameter name ftpPassword

Domain BTS

Description Password to be used to access the BTS by the FTPapplication, this password is encrypted.

Class 3

54


Presence required


Range [0..28]


Initial value

gammaParameter

Parameter name gammaParameter

Domain BTS

Description Number of consecutive valid ICP cells (IMA controlprotocol cells) to be detected before moving thegroup from a pre-synchronized state to a synchron-ized state.

Class 0

Presence required


Range icpCellValid1, icpCellValid2, icpCellValid3, icp-CellValid4, icpCellValid5


Initial value N.A.


getCommonChannelInfo

Parameter name getCommonChannelInfo

Domain BTS

Class NA

Presence optional

Visibility customer

Range [0..2147483647]

Data type Variable[12] List of sequenceValue

Initial value N.A.

getProcessingLoad

Parameter name getProcessingLoad

Domain BTS

Class NA

55


Presence optional

Visibility customer

Range [1..16]

Data type Variable[23] List of sequenceValue

Initial value N.A.

getRadioPowerInfo

Parameter name getRadioPowerInfo

Domain BTS

Class NA

Presence optional

Visibility customer

Range [0..2147483647]

Data type

Initial value N.A.

getSynchroInfo

Parameter name getSynchroInfo

Domain BTS

Class NA

Presence optional

Visibility customer

Range clockLocal, clockPcm-1, clockPcm-2, clockPcm-3,clockPcm-4, clockPcm-5, clockPcm-6, clockPcm-7,clockPcm-8, clockPcm-9, clockPcm-10, clockPcm-11, clockPcm-12, clockPcm-13, clockPcm-14,clockPcm-15, clockPcm-16, clockGpsam-1, clockG-psam-2, clockUnknown

Data type

Initial value N.A.

globalHardwareRef

Parameter name globalHardwareRef

Domain BTS

Description type of sofware of the iBTS

Class NA

56


Presence required


Range [0..2147483647]

Data type Decimal

Initial value N.A.

gpsSyncSourceNumber

Parameter name gpsSyncSourceNumber

Domain BTS

Description number of sources used for GPS synchronisation

Class 0

Presence required


Range [0..2]

Data type Decimal

Initial value N.A.

hsdpaCodeTreeManagementActivation

Parameter name hsdpaCodeTreeManagementActivation

Domain BTS

Class 3

Presence required

Visibility customer

Range false, true


Initial value false

hsdpaCongestionDelayThresholdATMHigh

Parameter name hsdpaCongestionDelayThresholdATMHigh

Domain BTS

Description This parameter defines the HSDPA congestiondelay detection threshold before considering theMAC-d flow going over ATM as congested

Class 3

Presence required

57


Visibility customer

Unit ms

Range [1..5000]

Data type Decimal

Initial value 100

hsdpaCongestionDelayThresholdATMLow

Parameter name hsdpaCongestionDelayThresholdATMLow

Domain BTS

Description This parameter defines the HSDPA decongestiondelay detection threshold before considering theMAC-d flow going over ATM as non-congested

Class 3

Presence required

Visibility customer

Unit ms

Range [1..5000]

Data type Decimal

Initial value 80

hsdpaCongestionDelayThresholdIPHigh

Parameter name hsdpaCongestionDelayThresholdIPHigh

Domain BTS

Description This parameter defines the HSDPA congestiondelay detection threshold before considering theMAC-d flow going over IP as congested

Class 3

Presence required

Visibility customer

Unit ms

Range [1..5000]

Data type Decimal

Initial value 100

hsdpaCongestionDelayThresholdIPLow

Parameter name hsdpaCongestionDelayThresholdIPLow

58


Domain BTS

Description This parameter defines the HSDPA decongestiondelay detection threshold before considering theMAC-d flow going over IP as non-congested

Class 3

Presence required

Visibility customer

Unit ms

Range [1..5000]

Data type Decimal

Initial value 80

hsdpaCongestionDetection

Parameter name hsdpaCongestionDetection

Domain BTS

Description This parameter controls the activation of the con-gestion detection on the Node B and the inclusionby the NodeB of the congestion status in the HS-DSCH Capacity Allocation

Class 3

Presence required

Visibility customer

Range noCongestion, delayBuildUp, frameLost, both


Initial value both

Recommended value both

hsdpaDeSequencingWaitTimerIP

Parameter name hsdpaDeSequencingWaitTimerIP

Domain BTS

Description This parameter allows to configure a delay beforedeclaring frame loss. This is used only when HS-DPA is conveyed over IP.

Class 3

Presence required

Visibility customer

Unit ms

59


Range [0..100]

Data type Decimal

Initial value 0

hsdpaDelayPerIubReference

Parameter name hsdpaDelayPerIubReference

Domain BTS

Description This parameter controls the activation of the en-hanced delay build-up detection algorithm on theNodeB.

Class 3

Presence required

Visibility customer

Range notActivated, activated


Initial value activated

Recommended value activated

hsdpaMaxNumberQueueIdHbbu

Parameter name hsdpaMaxNumberQueueIdHbbu

Domain BTS


Class 0

Presence required

Visibility customer

Range [0..65535]

Data type Decimal

Initial value 0

hsdpaMaxNumberUserHbbu

Parameter name hsdpaMaxNumberUserHbbu

Domain BTS

Description Maximum number of HSDPA user (logical channel)allowed per HsdpaResource (H-BBU). 0 meaningmaximum user allowed by software and hardware.If Capacity.hsdpaNumberUserCapacityLicensing isnot unlimited, then this parameter becomes use-

60


less.

Class 3

Presence required

Visibility customer

Range [0..65535]

Data type Decimal

Initial value 0

hsdpaMaxNumberUserPerNodeB

Parameter name hsdpaMaxNumberUserPerNodeB

Domain BTS


Class 0

Presence required

Visibility customer

Range [0..65535]

Data type Decimal

Initial value 0

hsdpaMaxNumberUserXcem

Parameter name hsdpaMaxNumberUserXcem

Domain BTS

Description This parameter represents the Maximum number ofHSDPA user (logical channel) allowed per XCEM. 0means maximum user allowed by software andhardware. If Capa-city.hsdpaNumberUserCapacityLicensing is not un-limited, then this parameter becomes useless.

Class 3

Presence required

Visibility customer


Data type Decimal

Initial value 0

hsdpaNumberOfFrameBeforeCongestion

61


Parameter name hsdpaNumberOfFrameBeforeCongestion

Domain BTS

Description This parameter defines the number of HSDPA Iubframes lost before declaring a Mac-d flow conges-ted caused by frame loss.

Class 3

Presence required

Visibility customer

Range [1..255]

Data type Decimal

Initial value 1

Recommended value 1

Rel version comments Not used by NodeB in UA6.0

hsdpaNumberOfFrameBeforeDeCongestion

Parameter name hsdpaNumberOfFrameBeforeDeCongestion

Domain BTS

Description This parameter defines the number of consecutiveHSDPA Iub frames (with consecutive FSN) to re-ceive before to switch back to

Class 3

Presence required

Visibility customer

Range [1..255]

Data type Decimal

Initial value 10

iRMLCGReportMode

Parameter name iRMLCGReportMode

Domain BTS

Description This parameter indicates how the BTS reports LocalCell Group to RNC (via NBAP) This parameter in-dicates how the base Band resources can beshared on CEM between 2 Local Cell Groups: Pos-sible value 0: separatedPool: each of the 2 LCG arereserved with 50% of the D-BBU resourcesBTS re-ports 1 Local Cell Group to RNC per object LocalCell Group defined at OMC-B 1: sharedPool: thereis no minimum resource reserved for each LCGBTS

62


reports either 1 Local Cell Group to RNC per R99RESOURCE object or 1 Local Cell Group to RNCper BTS, depending on whether or notr99NumberCECapacityLicensing limits the R99 Ca-pacity BTS Note: in case of 6 sector configurationwith maxNumberSectorsSofterHo set tomax3Sectors, the BTS will not necessary follow thisparameter in order to report only BTS CELL of thesame carrier within the same RNC Local CellGroup.

Class 0

Presence required

Visibility customer

Range separatedPool, sharedPool


Initial value separatedPool

imaFrameLength

Parameter name imaFrameLength

Domain BTS

Class 0

Presence required


Range frameLength32, frameLength64, frameLength128,frameLength256


Initial value N.A.

Def value comments frameLength128(2) factory value

imaUsed

Parameter name imaUsed

Domain BTS

Description PMC & IMA record (DI = Drop & Insert) 0= no IMA+no DI 1= IMA, no DI (V3) 2 = DI, no IMA 3 = DI +IMA (not V2)

Class 0

Presence required


Range [0..3]

63


Data type Decimal

Initial value N.A.

imaVersion

Parameter name imaVersion

Domain BTS

Description Version of the IMA

Class 0

Presence required


Range v1_0Version, v1_1Version


Initial value N.A.

Def value comments The factory value corresponds to V1_1

inVccGroup

Parameter name inVccGroup

Domain OAM

Description This parameter is used to automatically set the VPI/VCI in the RNC-IN, RNC-CN and possibly RNC-AN(when present) thanks to OCAN Engineering rules.The default value 0 is used to indicate that no en-gineering rule was used for the computation of VPI/VCI. The user must not modify this value independ-ent of VPI/VCI configuration

Class NA

Presence required

Visibility customer

Range [0..16383]

Data type Decimal

Initial value N.A.

ipAddress

Parameter name ipAddress

Domain BTS

Description IETF RFC 1208 (IP version 4 source IPV4 @(internet address is a 32-bit address assigned to

64


hosts using TCP/IP. The synyactic representtaionfor a 32-bit integer consists of four 8-bit numberswritten in base 10 with periods/dots separatingthem. Used to represent IP addresses in the Inter-net as in : 192.67.67.20) used by nodeB in order tocommunicate with OMC-B

Class NA

Presence required


Range [0..255].[0..255].[0..255].[0..255]

Data type Ip4Address

Initial value N.A.

Recommended value 0.0.0.0

ipAddressBts

Parameter name ipAddressBts

Domain BTS

Description IETF RFC 1208 (IP version 4 source IPV4 @(internet address is a 32-bit address assigned tohosts using TCP/IP. The synyactic representtaionfor a 32-bit integer consists of four 8-bit numberswritten in base 10 with periods/dots separatingthem. Used to represent IP addresses in the Inter-net as in : 192.67.67.20) used by nodeB in order tocommunicate with OMC-B

Class 0

Presence required


Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

ipAddressOmcB

Parameter name ipAddressOmcB

Domain BTS

Description IETF RFC 1208 (IP version 4 target IPV4 @(internet address is a 32-bit address assigned tohosts using TCP/IP. The synyactic representtaionfor a 32-bit integer consists of four 8-bit numberswritten in base 10 with periods/dots separating

65


them. Used to represent IP addresses in the Inter-net as in : 192.67.67.20) used by nodeB in order tocommunicate with OMC-B

Class 0

Presence required


Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

isCEMalphaPresent

Parameter name isCEMalphaPresent

Domain OAM

Class NA

Presence required

Visibility customer

Range false, true


Initial value false

isEdchBandwidthLimitationAllowed

Parameter name isEdchBandwidthLimitationAllowed

Domain BTS

Description The parameters is used to activate the E-DCH con-gestion control algorithm inside the NodeB

Class 3

Presence required

Visibility customer

Range false, true


Initial value false

Recommended value true

isRtwpAdjustmentForRnc

Parameter name isRtwpAdjustmentForRnc

Domain BTS

66


Description This parameter indicates if the BTS does a correc-tion of the RTWP before reporting it to RNC in theNBAP COMMON MEASUREMENT REPORT If theparameter is set to TRUE, the correction is: -106.1+ (Rtwp_measured - rtwpReferenceOrSelfLearned)Example isRtwpReferenceSelfLearned is set toTRUE The selfLearned rtwpReference is measuredby the BTS to -105dBm The BTS read a RTWP of -100dBm --> The BTS will report: -106.1 + (-100 +105) = -101.1 dBm (instead of -100)

Class 3

Presence required

Visibility customer

Range false, true


Initial value true

isRtwpReferenceSelfLearning

Parameter name isRtwpReferenceSelfLearning

Domain BTS

Description Permit to activate or the auto learning of the RTWPreference level

Class 3

Presence required

Visibility customer

Range false, true


Initial value true

iubLossTimeOut

Parameter name iubLossTimeOut

Domain BTS

Description Time laps to wait before resetting iBTS in case ofprolonged loss of IUB interface if not in radiatingmode. This timer is started when the iBTS is notconnected to any of RNC, OMC-B and TIL (i.e. con-nected to none of them). Default value = 60 (1 hour)Note: precision of this timer depends on iBTS/OMC-B SE/PE connection and disconnection de-tection. Precision of SE/PE disconnection detectiondepends on timer given by OMC-B: typical precision

67


value is between 1 and 4 minutes Precision of SE/PE (re)connection detection depends on iBTS in-ternal timer (currently 7 minutes, this value maychange in the future) Due to the imprecision of thistimer, it is not advised to set this value below 10minutes.

Class 3

Presence required

Visibility customer

Unit min

Range [20..1440]

Data type Decimal

Initial value 60

Rec val comments It is not advised to set this value below 10 minutes.

maskOfPcmTsUsed

Parameter name maskOfPcmTsUsed

Domain BTS

Description BitMask representing the list of Time Slots to use incase of Drop & Insert configuration. Possible Val-ues : 0 to 0xFFFFFFFE (TS0 is always used andswitched if needed in D&I config). When T1 will besupported add a control on Time Slot Range (<=24instead of 32)

Class 0

Presence required


Range [32..32]

Data type BitString

Initial value N.A.

maskOfPcmUsed

Parameter name maskOfPcmUsed

Domain BTS

Description Whatever the imaUsed flag, this bit mask has al-ways one single bit set to 1. This bit represents thePCM number to use for OAM connection. If manybits set to 1, the less significant one is selected asthe right one.

68


Class 0

Presence required


Range [32..32]

Data type BitString

Initial value N.A.

maxDifferentialDelay

Parameter name maxDifferentialDelay

Domain BTS

Description Differential Delay is a factor of time that cells mayspend on different links due to the length of thetransmission path or delays introduced by interme-diate equipment

Class 0

Presence required


Unit ms

Range [1..25]

Data type Decimal

Initial value N.A.


maxNumberSectorsSofterHo

Parameter name maxNumberSectorsSofterHo

Domain BTS

Description The parameter indicates if the BTS shall managesofter HO on 3 or 6 sectors: If max3Sectors, theBTS will manage softer HO on 3 cells max (cells re-ferred by 1 LCG) If max6Sectors, the BTS will man-age softer HO on 6 cells max, (the 6 cells of the 2LCG referring the same RF CARRIER)

Class 0

Presence required

Visibility customer

Range max3Sectors, max6Sectors


Initial value max3Sectors

69


Recommended value max6Sectors

mbmsActivation

Parameter name mbmsActivation

Domain BTS

Class 3

Presence required

Visibility customer

Range false, true


Initial value false

mibSynchronization

Parameter name mibSynchronization

Domain OAM

Description -MIB Synchronization "On": Configuration modifica-tions are refused by OMC if they cannot be sent tothe NE through an Online Command. -MIB Syn-chronization Build or Online Creation.

Class NA

Presence required

Visibility customer

Range on, off


Initial value on

minNbOfActiveLinksInGroup

Parameter name minNbOfActiveLinksInGroup

Domain BTS

Description Represents the number of links to be active (both inRx and Tx) in the group so that the group is con-sidered as active.

Class 0

Presence required


Range [1..1]

70


Data type Decimal

Initial value N.A.


modelName

Parameter name modelName

Domain OAM

Description Name of the associated BTSEquipment model

Class NA

Presence required

Visibility customer

Range NA


Initial value N.A.

nbPcm

Parameter name nbPcm

Domain OAM

Description number of PCMs

Class NA

Presence required

Visibility customer

Range [1..16]

Data type Decimal

Initial value N.A.

networkService

Parameter name networkService

Domain BTS

Description This attribute is initialised by the detection protocoland is used for SE/PE TCP communication.

Class NA

Presence required


Range [0..2147483647]

71


Data type Decimal

Initial value N.A.

nodeBArchitecture

Parameter name nodeBArchitecture

Domain BTS

Description This is an integer with identified value indicating theBts type, in this release those type are as follows :Format: Integer composed of 2 pieces of informa-tion NodeBArchitecture = N1 + 100xN2 N1 repres-ent the Packaging type of the main cabinet N2 rep-resents the Packaging type of the extension cabinetPossible values for N1 are: -(0) UMTS BTS12010-1-700 -(1) UMTS BTS 12020-1 -(2) UMTSBTS 12010-1-600 -(3) UMTS BTS 6010 -(4) UMTSBTS 6020 -(5) UMTS BTS 12010-2 -(6) UMTS BTS12020-2 -(7) UMTS BTS 1020 -(8) GSM-UMTSBTS 18010 -(9) GSM-UMTS BTS 18020 -(10)UMTS dBTS 2U -(11) UMTS BTS 12110 (subway)(FRS 30800) -(12) UMTS dBTS 6110 -(13) UMTSdBTS 6120 Note: value 14, to 18 are reserved -(19)UMTS BTS 12120 -(20) UMTS dNodeB 2U V2(FRS 33712) -(21) 9312 Compact Outdoor Possiblevalues for N2 are: -(0) <No extension cabinet> -(1)UMTS rBTS 6110 AC -(2) UMTS rBTS 6110 DC -(3) UMTS rBTS 6120 AC -(4) UMTS rBTS 6120 DC-(5) UMTS rBTS 6120 AC/DC

Class NA

Presence required


Range [0..2147483647]

Data type Decimal

Initial value N.A.

note

Parameter name note

Domain OAM

Description Informal comments.

Class NA

Presence optional

Visibility customer

72


Range NA


Initial value N.A.

omcBPort

Parameter name omcBPort

Domain BTS

Class 0

Presence required


Range [0..2147483647]

Data type Decimal

Initial value N.A.

operationalState


Domain BTS

Description X731 - OSI state This attribute has two values:

Class NA

Presence required

Visibility customer




paPoolingActivation

Parameter name paPoolingActivation

Domain BTS

Class 0

Presence required

Visibility customer

Range false, true


Initial value false

73


paSwitchOffActivation

Parameter name paSwitchOffActivation

Domain BTS

Description This parameter is used to activate the switch off ofthe radio part of MCPA when the MCPA is notused.

Class 3

Presence required

Visibility customer

Range false, true


Initial value false

Class 3 detail A2

pcmChannel16Mode

Parameter name pcmChannel16Mode

Domain BTS

Description This parameter indicates if the 16th channel of thePCM E1 can be used for traffic or not.

Class 0

Presence required


Range signallingOrReserved, traffic


Initial value N.A.

pcmE1Adaptation

Parameter name pcmE1Adaptation

Domain BTS

Class NA

Presence required


Unit ohms

Range adaptation120ohms, adaptation75ohms


74


Initial value N.A.

Def value comments 120 ohms is the factory value

pcmE1CrcThreshold

Parameter name pcmE1CrcThreshold

Domain BTS

Class 0

Presence required


Range [0..2147483647]

Data type Decimal

Initial value N.A.

pcmLbo

Parameter name pcmLbo

Domain BTS

Class NA

Presence required


Range [0..32]


Initial value N.A.

pcmProtectionModule

Parameter name pcmProtectionModule

Domain BTS

Class NA

Presence required


Range false, true


Initial value N.A.

pcmReceiveSensitivity

75


Parameter name pcmReceiveSensitivity

Domain BTS

Class NA

Presence required


Range [0..32]


Initial value N.A.

pcmT1Adaptation

Parameter name pcmT1Adaptation

Domain BTS

Class NA

Presence required


Unit ohms

Range adaptation100ohms


Initial value N.A.

Def value comments 100 ohms is the factory value

pcmT1CrcThreshold

Parameter name pcmT1CrcThreshold

Domain BTS

Class 0

Presence required


Range [0..2147483647]

Data type Decimal

Initial value N.A.

pcmType

Parameter name pcmType

Domain BTS

Class NA

76


Presence required


Range pcmT1, pcmE1


Initial value N.A.

perfServerId

Parameter name perfServerId

Domain OAM

Description Cluster Id to the perfserver in charge of this BTS (tobe defined)

Class NA

Presence optional


Range NA


Initial value UPERFSERV1

pmClusterId

Parameter name pmClusterId

Domain OAM

Description PM Cluster unique identifier

Class NA

Presence optional

Visibility customer

Range PMCluster


Initial value N.A.

pmObservationPeriod

Parameter name pmObservationPeriod

Domain BTS

Description This parameter gives the period with which the BTSgenerates PM files that can be retrieved by PMserver.

Class 3

77


Presence required

Visibility customer

Unit min

Range 15, 60


Initial value 60

Class 3 detail A2

provisionedSystemRelease

Parameter name provisionedSystemRelease

Domain OAM

Description it is the expected release of the provisioned Net-work Element. This value is compared to the cur-rent NE System Release and allows to detect com-patibility problems (e.g. upgrade required, etcRe-lease syntax

Class NA

Presence required


Range NA


Initial value 06_00_00

r99MaxNumberCeXcem

Parameter name r99MaxNumberCeXcem

Domain BTS

Description Maximum number of Channel Element (CE) re-source allowed for R99 service (Common channeland dedicated channels). This parameter is applic-able to "the" pool of XCEM in the NodeB. Value 0means No CE. If Capa-city.r99NumberCECapacityLicensing is not unlim-ited, then this parameter becomes useless.

Class 3

Presence required

Visibility customer

Unit CE

Range [0..65504] step:16

78


Data type Decimal

Initial value 0

radiusActivationMode

Parameter name radiusActivationMode

Domain BTS

Class 3

Presence required

Visibility customer

Range notActivated, activatedOnIP


Initial value notActivated

rakeMode

Parameter name rakeMode

Domain BTS

Description Layer 1 parameter. Number of fingers.

Class 0

Presence required

Visibility customer

Range classical4, classical8


Initial value classical4

receiveCrc

Parameter name receiveCrc

Domain BTS

Description 0 = not used 1 = used

Class 0

Presence required


Range [0..1]

Data type Decimal

Initial value N.A.

Def value comments not used factory state

79


repetitionCommonNbap

Parameter name repetitionCommonNbap

Domain BTS

Description Maximum number of repetition of common NBAPprocedure.

Class 0

Presence required

Visibility customer

Range [0..10]

Data type Decimal

Initial value 3

rmVersion

Parameter name rmVersion

Domain BTS

Description This parameter gives the number y receive fre-quency of 1 xTRM can be activated on the BTS; 2 =2 xTRM can be activated with 2 carrier-RX on theBTS. If Capacity.xtrmCarrierCapacityLicensing isnot unlimited, then this parameter becomes use-less.

Class 0

Presence required

Visibility customer

Range [0..2147483647]

Data type Decimal

Initial value 0


runningSoftwareVersion

Parameter name runningSoftwareVersion

Domain OAM

Description Updated during upgrade with upgrade server

Class NA

Presence required

80


Visibility customer

Range NA


Initial value N.A.

rxCdvTPcrVcOmcB

Parameter name rxCdvTPcrVcOmcB

Domain BTS

Description ATM Forum: af-tm-0056.000 April 1996 "TrafficManagement Specification" It is included in TrafficDescriptor parameters for Iub VCC. It is used thetolerance associated to the PCR (Peak Cell Rate).Not supported in current release

Class 0

Presence required


Unit ms

Range [0..2147483647]

Data type Decimal

Initial value N.A.


rxCdvTScrVcOmcB

Parameter name rxCdvTScrVcOmcB

Domain BTS

Description ATM Forum: af-tm-0056.000 April 1996 "TrafficManagement Specification" It is included in TrafficDescriptor parameters for Iub VCC. It is the toler-ance associated to the SCR (Sustainable CellRate). Not supported in current release CurrentBTS hardware don't support such a feature, the de-fault value is then force to 0.

Class 0

Presence required


Unit ms

Range [0..2147483647]

Data type Decimal

81


Initial value N.A.


rxDemodulation

Parameter name rxDemodulation

Domain BTS

Description This parameter is reserved to activate/desactivateL1 algorithm. Bit0: 0: Activate the common Layer1UL enhancement algorithm (MAP CIRE DOPPLER)1: do not activate the common activate Layer1 ULenhancement algorithm Bit 1: 0: H-BBU detection ofthe HS-DPCCH presence based on CQI ON 1: H-BBU detection of the HS-DPCCH presence basedon CQI OFF Bit 2: 0 : enhanced demodulation forhigh speed UE OFF 1 : enhanced demodulation forhigh speed UE ON Other values are reserved Thisparameter is not used by CEM alpha. Default value= 0

Class 0

Presence required

Visibility customer

Range [0..2147483647]

Data type Decimal

Initial value 0

rxMbsVcOmcB

Parameter name rxMbsVcOmcB

Domain BTS

Description Forum: af-tm-0056.000 April 1996 "Traffic Manage-ment Specification It is included in Traffic Descriptorparameters for Iub VCC. It is the maximum numberof cells that can be sent at PCR (Peak Cell Rate).

Class 0

Presence required


Unit number of cells

Range [0..2147483647]

Data type Decimal

Initial value N.A.

82



rxPcrVcOmcB

Parameter name rxPcrVcOmcB

Domain BTS


Class 0

Presence required


Unit cells/sec

Range [0..2147483647]

Data type Decimal

Initial value N.A.


rxScrVcOmcB

Parameter name rxScrVcOmcB

Domain BTS


Class 0

Presence required


Unit cells/sec

Range [0..2147483647]

Data type Decimal

Initial value N.A.


83


securityMode

Parameter name securityMode

Domain BTS

Description Parameter used to activate BTS security featuresBit meaning * 1st bit used to activate/deactivate theSITE LAN firewall bit_0 = 0 means IpFilter activedbit_0 = 1 means IpFilter deactived Default value =all bits set to 0 In UA04.1, only the default value issupported.

Class 0

Presence required

Visibility customer

Range [32..32]

Data type BitString

Initial value 00000000000000000000000000000000

serviceCategoryVcOmcB

Parameter name serviceCategoryVcOmcB

Domain BTS

Description For V3.1 iBTS, the supported values are : CBR (0),VBRrt (1), VBRnrt (2), UBR (3)

Class 0

Presence required


Range CBR, VBRrt, VBRnrt, UBR, UBRPlus, VBRnrt0,VBRnrt2, VBRnrt3, UBR0, UBR1, UBR3,UBRPlus0, UBRPlus1, UBRPlus3


Initial value N.A.

Def value comments UBR factory configuration

siActivityTimer

Parameter name siActivityTimer

Domain BTS

Class 3

Presence required

Visibility customer

84


Unit TTI


Data type Decimal

Initial value 12

siteName

Parameter name siteName

Domain OAM

Description Name of the associated site

Class NA

Presence optional

Visibility customer

Range Site


Initial value N.A.

subNetworkMask

Parameter name subNetworkMask

Domain BTS

Description IETF RFC 922 & 1878 The network mask strips thenetwork ID from the IP address, leaving only thehost ID. The network mask is what performs all thelocal magic of dividing an IP network into subnet-works. The network mask for an un-sub-networkedIP network number is simply a dotted quad whichhas all the 'network bits' of the network number setto '1' and all the host bits set to '0'. So, for the threeclasses of IP networks, the standard network masksare:- 255.255.255.0 The way sub-networking oper-ates is to borrow one or more of the available hostbits and make then make interfaces locally interpretthese borrowed bits as part of the network bits. Soto divide a network number into two subnetworks,we would borrow one host bit by setting the appro-priate bit in the network mask of the first (normal)host bit to '1'. For a C Class address, this wouldresult in a netmask of11111111.11111111.11111111.10000000 or255.255.255.128 For C Class network number of192.168.1.0, these are some of the sub-networkingoptions you have:_________________________________________

85


_____________________________ No of No ofsubnets Hosts/net netmask 2 126 255.255.255.128(11111111.11111111.11111111.10000000) 4 62255.255.255.192(11111111.11111111.11111111.11000000) 8 30255.255.255.224(11111111.11111111.11111111.11100000) 16 14255.255.255.240(11111111.11111111.11111111.11110000) 32 6255.255.255.248(11111111.11111111.11111111.11111000) 64 2255.255.255.252(11111111.11111111.11111111.11111100)______________________________________________________________________ The addressof an interface (such as an Ethernet card or PPP in-terface on a host, router, print server etc) can haveany value in the host bits except all zero or all 1 is anetwork address and with the host bits all 1 the ad-dress is the broadcast address

Class 0

Presence required


Range NA


Initial value N.A.

supervisedExternalAlarmMask

Parameter name supervisedExternalAlarmMask

Domain BTS

Description Mask (bit map) giving the operator external alarmsthat have to be supervised

Class 3

Presence required

Visibility customer

Range [32..32]

Data type BitString

Initial value 00000000000000000000000000000000


supervisedUserAlarmMask

86


Parameter name supervisedUserAlarmMask

Domain BTS

Description Mask (bit map - 32 bit) giving the USER rack alarmsthat have to be supervised

Class 3

Presence required

Visibility customer

Range [32..32]

Data type BitString

Initial value 00000000000000000000000000000000


syncDelay

Parameter name syncDelay

Domain BTS

Class 0

Presence required


Range [0..2147483647]

Data type Decimal

Initial value N.A.

syncFallbackOnPcm

Parameter name syncFallbackOnPcm

Domain BTS

Description Synchronization fallback on PCM 0=no, 1=yes

Class 0

Presence required


Range [0..1]

Data type Decimal

Initial value N.A.

Def value comments Yes (factory state) means that fallback is garanteed

syncMode

87


Parameter name syncMode

Domain BTS

Description Mode of synchronization 0 = frame, 1 = burst

Class 0

Presence required


Range [0..1]

Data type Decimal

Initial value N.A.

systemRelease

Parameter name systemRelease

Domain OAM

Description it represents the functional level of a Network ele-ment

Class NA

Presence required

Visibility customer

Range NA


Initial value N.A.

t1PcmCoding

Parameter name t1PcmCoding

Domain BTS

Class NA

Presence required


Range b8zsCoding, amiCoding


Initial value N.A.

Def value comments B8Zs is the factory state

t1PcmFrame

Parameter name t1PcmFrame

88


Domain BTS

Class NA

Presence required


Range superFrame, extendedSuperFrame


Initial value N.A.

Def value comments ESF is the factory state

tcpPort

Parameter name tcpPort

Domain BTS

Description This attribute is initialised by the detection protocoland is used for TROL TCP communication.

Class NA

Presence required


Range [0..2147483647]

Data type Decimal

Initial value N.A.

telnetPassword

Parameter name telnetPassword

Domain BTS

Description Password to be used to access the BTS by the tel-net application, this password is encrypted.

Class 3

Presence required


Range [0..28]


Initial value

testFrequency

Parameter name testFrequency

89


Domain BTS

Description UARFCN (UTRA Absolute Radio Frequency Chan-nel Number of the Down Link Frequency used bythe BTS to detect its RF cabling: Nd = 5 *(Fdownlink MHz). For UMTS Band, valid values arein [10562 ,10838]. For UMTS1900, valid values are412, 437, 462, 487, 512, 537, 562, 587, 612, 637,662, 687 U [9662;9938]

Class 3

Presence required

Visibility customer

Range [0..16383]

Data type Decimal

Initial value N.A.

testPatternProcedure

Parameter name testPatternProcedure

Domain BTS

Class 0

Presence required


Range false, true


Initial value N.A.

Def value comments False (factory value); The value TRUE is not sup-ported

tilPassword

Parameter name tilPassword

Domain BTS

Description Password to be used to access the BTS by the TIL,this password is encrypted.

Class 3

Presence required


Range [0..28]


Initial value

90


timerAlcapCellValidity

Parameter name timerAlcapCellValidity

Domain BTS

Description Note: Parameter is not used in this release and theonly allowed value is 0. This timer is used to delaythe BTS impact on all cell on detection of SSCOPALCAP disconnection. The BTS will impact all cellswhen the ALCAP SSCOP has become disconnec-ted for timerALCAPCellValidity seconds Value 0means

Class 3

Presence required

Visibility customer

Unit s

Range [0..3600]

Data type Decimal

Initial value 0


timerBtsOmcbNeConnectRequest

Parameter name timerBtsOmcbNeConnectRequest

Domain BTS

Description This timer is the period at which the BTS tries toconnect to OMC-B on the OAM link. Note: decreas-ing this timer decreases the time for the BTS to re-connect to OMC-B (after disconnection of the BTS-OMC-B OAM link). But it may increase the risk ofOMC-B being overloaded by multiple BTS trying to(re)connect at the same time to OMC-B. Note2: TheBTS uses the default value when it is not built

Class 3

Presence required

Visibility customer

Unit s

Range [20..600]

Data type Decimal

Initial value 180

91


timerCellImpactNoCcp

Parameter name timerCellImpactNoCcp

Domain BTS

Description The BTS will declare a BTS Cell disable(operational state disable) when all CCP that canserve this BTS Cell have been disable during timer-CellImpactNoCcp seconds Value 0 means scon-nected for more than timerCellImpactNoCcpseconds.

Class 3

Presence required

Visibility customer

Unit s

Range [0..3600]

Data type Decimal

Initial value 35

timerCommonNbap

Parameter name timerCommonNbap

Domain BTS

Description Timer used to repeat NBAP common procedure(AuditRequired, ResetRequest) to RNC on non re-sponse from RNC.

Class 0

Presence required

Visibility customer

Unit s

Range [5..300]

Data type Decimal

Initial value 40

timerNodeBCPCellValidity

Parameter name timerNodeBCPCellValidity

Domain BTS

Description The BTS will declare internally delete all NBAP con-figuration from RNC when NODEB-CP becomesdisable (SSCOP disconnection) during timerNodeB-

92


CPCellValidity seconds Value 0 means

Class 3

Presence required

Visibility customer

Unit s

Range [0..3600]

Data type Decimal

Initial value 0

txCdvTPcrVcOmcB

Parameter name txCdvTPcrVcOmcB

Domain BTS


Class 0

Presence required


Unit ms

Range [0..2147483647]

Data type Decimal

Initial value N.A.


txCdvTScrVcOmcB

Parameter name txCdvTScrVcOmcB

Domain BTS


Class 0

Presence required

93



Range [0..2147483647]

Data type Decimal

Initial value N.A.

Def value comments The factory value corresponds to 50000ms

txMbsVcOmcB

Parameter name txMbsVcOmcB

Domain BTS


Class 0

Presence required



Range [0..2147483647]

Data type Decimal

Initial value N.A.


txPcrVcOmcB

Parameter name txPcrVcOmcB

Domain BTS

Description ATM Forum: af-tm-0056.000 April 1996 "TrafficManagement Specification" It is included in TrafficDescriptor parameters for Iub VCC. It is used thetolerance associated to the PCR (Peak Cell Rate).

Class 0

Presence required


Unit cells/sec

Range [0..2147483647]

Data type Decimal

Initial value N.A.


94


txScrVcOmcB

Parameter name txScrVcOmcB

Domain BTS

Description ATM Forum: af-tm-0056.000 April 1996 "TrafficManagement Specification" It is included in TrafficDescriptor parameters for Iub VCC. It is the toler-ance associated to the SCR (Sustainable CellRate). Current BTS hardware don't support such afeature, the default value is then force to 0.

Class 0

Presence required


Unit cells/sec

Range [0..2147483647]

Data type Decimal

Initial value N.A.


unknownStatus

Parameter name unknownStatus

Domain OAM


Class NA

Presence required

Visibility customer

Range unknownstatusfalse, unknownstatustrue


Initial value unknownstatustrue

upgradeStatus

Parameter name upgradeStatus

Domain OAM

Class NA

Presence required

Visibility customer

Range IDLE, DOWNLOAD_REQUESTED, DOWN-

95


LOAD_COMPLETED, DOWN-LOAD_IN_PROGRESS, ACTIVA-TION_IN_PROGRESS, FALL-BACK_IN_PROGRESS


Initial value IDLE

userSpecificInfo


Domain OAM


Class NA

Presence optional

Visibility customer

Range [0..128]


Initial value N.A.

vcOmcB

Parameter name vcOmcB

Domain BTS

Description VCC used by the OMC-B

Class 0

Presence required


Range [0..2147483647]

Data type Decimal

Initial value N.A.

vpOmcB

Parameter name vpOmcB

Domain BTS

Description VP used by the OMC-B

Class 0

Presence required

96



Range [0..15]

Data type Decimal

Initial value N.A.

xcemBbuMode

Parameter name xcemBbuMode

Domain BTS

Description This parameter is not used by the NodeB. In UA06,the NodeB is automatically activated in multimode.

Class 0

Presence required

Visibility customer

Range singleModeBbu, multiModeBbu


Initial value multiModeBbu

Rel version comments Release warningThis parameter is not used in thisrelease

xcemPartialFailureActivation

Parameter name xcemPartialFailureActivation

Domain BTS

Description This parameter is used to activate management ofpartial failure of the xCEM board.

Class 3

Presence required

Visibility customer

Range false, true


Initial value false

97


9 BTSEquipmentMIB (BTSEquipmentMIB)





Parents:

BTSEquipment - BTSEquipmentMIB

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain OAM

Description BTSEquipmentMIB identifier.

Class NA

Presence required

Visibility customer

Unit

Range [0..0]

Data Type Decimal

Initial Value

98


interfaceVersion

Parameter name interfaceVersion

Domain BTS

Description Version of the ASN1 interface. Initialised from theconfig report. Possible values (Integer):

Class NA

Presence required


Range [0..2147483647]

Data type Decimal

Initial value N.A.

mibBuildNumber

Parameter name mibBuildNumber

Domain BTS

Description Last MIB version number given by the OMC-B dur-ing the build phase

Class NA

Presence required


Range [-1..2147483647]

Data type Signed

Initial value N.A.

mibState

Parameter name mibState

Domain OAM

Description Describes the state of the MIB .Initialised from theconfig report. No get available on this attribute.

Class NA

Presence required

Visibility customer

Range notBuilt, builtNotUpToDate, builtUpToDate, up-dateInProgress


Initial value N.A.

99


100


10 BTSEquipmentSoftware (BTSEquipmentSoftware)





Parents:

BTSEquipment - BTSEquipmentSoftware

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain OAM

Description BTSEquipmentSoftware identifier.

Class NA

Presence required

Visibility customer

Unit

Range [0..0]

Data Type Decimal

Initial Value

101


passiveDeliveryName

Parameter name passiveDeliveryName

Domain OAM

Description Backup software version

Class NA

Presence required


Range NA


Initial value N.A.

runningDeliveryName

Parameter name runningDeliveryName

Domain OAM

Description Software version currently running

Class NA

Presence required


Range NA


Initial value N.A.

102


11 BTSHsdpaResource (BTSHsdpaResource)





Parents:

BTSEquipment - BTSHsdpaResource

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..5]

Data Type Decimal

Initial Value

103


hsdpaMaxThroughputHbbu

Parameter name hsdpaMaxThroughputHbbu

Domain BTS

Description Maximum throughput in Kb/s for HSDPA traffic(MAC-hs layer) that can be used by the HSDPARESOURCE (that is on a H-BBU of an iCEM).

Class 0

Presence required

Visibility customer

Unit Kbits/s

Range [5400..10800] step:5400

Data type Decimal

Initial value 10800

userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

104


12 Board (Board)





Parents:

BTSEquipment - Board

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description Board Identifier

Class NA

Presence required

Visibility customer

Unit

Range [0..4294967295]

Data Type Decimal

Initial Value

105


administrativeState

Parameter name administrativeState

Domain BTS

Description X731 - OSI state This attribute is read-write. It rep-resents board administration, which operates inde-pendently of the operability and usage of managedobjects. This attribute has three values: s function

Class 3

Presence required

Visibility customer

Range locked, unlocked, shuttingdown


Initial value unlocked

availabilityStatus


Domain BTS

Description X731 - OSI state It represents the board availability.An empty set implies that the board is available. Itcan have the values: ot used

Class NA

Presence required

Visibility customer



Initial value N.A.

cabinetNumber

Parameter name cabinetNumber

Domain BTS

Description Cabinet number where this board is present

Class NA

Presence required

Visibility customer

Range [0..2147483647]

106


Data type Decimal

Initial value N.A.

hardwareRelease

Parameter name hardwareRelease

Domain BTS

Description Indicates the revision level of the equipment 4 AS-CII char: ttnn tt = 2 spaces for a regular product 1space + P for a prototype nn = hardware version

Class NA

Presence required

Visibility customer

Range [0..4]


Initial value N.A.

manufacturerInfo

Parameter name manufacturerInfo

Domain BTS

Description Manufacturer information if available of the module.

Class NA

Presence optional

Visibility customer

Range [0..64]


Initial value N.A.

manufacturingDate

Parameter name manufacturingDate

Domain BTS

Description Note: the parameter is optional for compatibilityreason This parameter is set at Manufacturing dateand is not modified Format wwyy with ww = weeknumber (2 chars) yy = last 2 digits of year number(2 chars) Example: Week 03 year 2000 is coded0300

Class NA

107


Presence optional

Visibility customer

Range [0..4]


Initial value N.A.

moduleApplication

Parameter name moduleApplication

Domain BTS

Description Module application

Class NA

Presence required

Visibility customer

Range gsm, umts, gsm_umts


Initial value N.A.

moduleName

Parameter name moduleName

Domain BTS

Description Name of the RU in the BAAN database set at man-ufacturing date

Class NA

Presence required

Visibility customer

Range [0..30]


Initial value N.A.

moduleSubType

Parameter name moduleSubType

Domain BTS

Description Module sub type

Class NA

Presence required

108


Visibility customer

Range [0..15]

Data type Decimal

Initial value N.A.

moduleType

Parameter name moduleType

Domain BTS

Description Module type, this represents the board type For ex-ample : 0x001: CCM 0x026 : iCCM board 0x027 :iCCM mini back-plane 0x052: gCCM 0x002: CEMalpha 0x025 : iCEM 64 0x024 : iCEM 128 0x004:TRM 2100 0x028 : iTRM 2100 0x029 : TRM 19000x040 : iTRM1900 0x007: GPSAM / CGPSAM0x016: MCPA UMTS 0x017: MCPA GSM/UMTS0x02A : MCPA 1900 0x018: DDM 2100 / DDM19000x018 : DDM CR 0x01A: TX splitter 0x04E: DDM-RK 0x04A: RRH any frequency band 0x04B:C1OIM 0x04C: C2OIM 0x04D: C3OIM Note: 04)

Class NA

Presence required

Visibility customer

Range [0..2147483647]

Data type Decimal

Initial value N.A.

operationalState


Domain BTS

Description X731 - OSI state It represents the board operability.This attribute has two values: -

Class NA

Presence required

Visibility customer




109


pecCode

Parameter name pecCode

Domain BTS

Description Hardware board Product Engineering Code.__NTxxNNnnnnnnnn __: two spaces reserved forfuture use where NN = Module family andNnnnnnnn = Edition number

Class NA

Presence required

Visibility customer

Range [0..16]


Initial value N.A.

positionInShelf

Parameter name positionInShelf

Domain BTS

Description Slot number in the shelf

Class NA

Presence required

Visibility customer

Range [1..255]

Data type Decimal

Initial value N.A.

serialNumber

Parameter name serialNumber

Domain BTS

Description Hardware board construction number._____________NNTMxxyyyyyy _____________:13 blank space reserved for future use NNTM: forAlcatel-Lucent manufacturer ID (4 char) xx = Manu-facturing location (2 char) yyyyyy = Serial number(6 char)

Class NA

Presence required

Visibility customer

Range [0..25]

110



Initial value N.A.

shelfNumber

Parameter name shelfNumber

Domain BTS

Description Shelf number where this board is present

Class NA

Presence required

Visibility customer

Range [0..10]

Data type Decimal

Initial value N.A.

standbyStatus

Parameter name standbyStatus

Domain BTS

Description X731 - OSI state For active board and none re-dundant boards, this attribute will be set to

Class NA

Presence required

Visibility customer

Range hotStandby, coldStandby, providingService


Initial value coldStandby

111


13 CCP (CCP)





Parents:

BTSEquipment - CCP

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


vccId VCC

Parameters:

rdnId


Domain BTS

Description Communication Control Port identifier.

Class NA

Presence required

Visibility customer

Unit

Range [0..5]

Data Type Decimal

112


Initial Value

availabilityStatus


Domain BTS

Description X731 - OSI State

Class NA

Presence required

Visibility customer



Initial value N.A.

ccpId

Parameter name ccpId

Domain BTS

Description CCP Identifier for the Communication Control Port

Class 0

Presence required

Visibility customer

Range [1..6]

Data type Decimal

Initial value N.A.

operationalState


Domain BTS


Class NA

Presence required

Visibility customer




113


userSpecificInfo


Domain OAM


Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

vccId


Domain BTS


Class 0

Presence required

Visibility customer

Range VCC


Initial value N.A.

114


14 Capacity (Capacity)





Parents:

BTSEquipment - Capacity

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..0]

Data Type Decimal

Initial Value

115


edchNumberUserCapacityLicensing

Parameter name edchNumberUserCapacityLicensing

Domain BTS

Description Maximum number of EDCH users that the BTS isallowed to setup.

Class 3

Presence required

Visibility customer

Range { [0..65534],infinite }

Data type MixedDecimal

Initial value infinite

edchThroughputCapacityLicensing

Parameter name edchThroughputCapacityLicensing

Domain BTS

Description Maximum mac-e throughput allowed for EDCH ser-vice.

Class 3

Presence required

Visibility customer

Unit Kbits/s




getLicensingcapability

Parameter name getLicensingcapability

Domain BTS

Class NA

Presence optional

Visibility customer

Range [0..2147483647]

Data type

Initial value N.A.

116


hsdpaNumberUserCapacityLicensing

Parameter name hsdpaNumberUserCapacityLicensing

Domain BTS

Description Maximum number of HSDPA users that the BTS isallowed to setup.

Class 3

Presence required

Visibility customer




hsdpaThroughputCapacityLicensing

Parameter name hsdpaThroughputCapacityLicensing

Domain BTS

Description Maximum mac-hs throughput allowed for HSDPAservice.

Class 3

Presence required

Visibility customer

Unit Kbits/s




paPowerCapacityLicensing

Parameter name paPowerCapacityLicensing

Domain BTS

Description Maximum Power that is allowed to be used for theMCPA managed by the BTS. Value 65535 meansunlimited capacity

Class 3

Presence required

Visibility customer

Unit W


117




r99NumberCECapacityLicensing

Parameter name r99NumberCECapacityLicensing

Domain BTS

Description Number of Channel Element that the BTS is al-lowed to allocate for R99 traffic (common or dedic-ated channels). Value 65535 means unlimited ca-pacity.

Class 3

Presence required

Visibility customer

Range { [0..65520],infinite } step:16



rrhCarrierCapacityLicensing

Parameter name rrhCarrierCapacityLicensing

Domain BTS

Description Number supplementary RX carrier allowed forRRH.Value 0 means that all RRH are mono-carrierin Reception.

Class 3

Presence required

Visibility customer




rrhPowerCapacityLicensing

Parameter name rrhPowerCapacityLicensing

Domain BTS

Description Maximum Power that is allowed to be used for theRRH and TRDU managed by the BTS.

Class 3

Presence required

118


Visibility customer

Unit W




userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

xtrmCarrierCapacityLicensing

Parameter name xtrmCarrierCapacityLicensing

Domain BTS

Description Number supplementary RX carrier allowed forxTRM.

Class 3

Presence required

Visibility customer




119


15 CoolingSystem (CoolingSystem)





Parents:

BTSEquipment - CoolingSystem

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description CoolingSystem identifier

Class NA

Presence required

Visibility customer

Unit

Range [0..1]

Data Type Decimal

Initial Value

120


121


16 CounterFamily (CounterFamily)





Parents:

BTSEquipment - CounterFamily

Child(ren):

-

Identifiers:


MaxIn-stances

counterFam-ilyId

relative primary none 0 15


MaxIn-stances

rdnId relative secondary none 0 15

Links:


Parameters:

counterFamilyId

Parameter name counterFamilyId

Domain BTS

Description CounterFamily identifier

Class 0

Presence required

Visibility customer

122


Unit

Range [0..14]

Data Type Decimal

Initial Value

rdnId


Domain BTS

Description CounterFamily identifier on NE interface

Class NA

Presence required


Unit

Range [0..14]

Data Type Decimal

Initial Value

counterList

Parameter name counterList

Domain BTS

Description Each integer in the list (necessarily not empty) is aBTS counter id (hence a value greater than 10 000)as defined in [A1]. When the MIB is built, PM mod-ule checks the validity of all counter identifiers. Incase an unknown identifier is present the configura-tion file is refused and the BTS transitions to

Class 0

Presence required


Range [10000..2147483647]

Data type Variable[20] List of Decimal

Initial value N.A.


userSpecificInfo

123



Domain OAM


Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

124


17 DeviceTable (DeviceTable)





Parents:

BTSEquipment - SiteLan - DeviceTable

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description DeviceTable identifier

Class NA

Presence required

Visibility customer

Unit

Range [0..5]

Data Type Decimal

Initial Value

125


deviceIpAddress

Parameter name deviceIpAddress

Domain BTS

Description IP address of device IETF RFC 1208 (IP version 4target IPV4 @ (internet address is a 32-bit addressassigned to hosts using TCP/IP. The synyactic rep-resenttaion for a 32-bit integer consists of four 8-bitnumbers written in base 10 with periods/dots separ-ating them. Used to represent IP addresses in theInternet as in : 192.67.67.20) used by nodeB in or-der to communicate with OMC-B

Class 3

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

deviceType

Parameter name deviceType

Domain BTS

Description Man readable string representing the device type(significant only for TIL) For RETA Device, the nam-ing must be as follows : RETA XXXXXXX RETA isthe string "RETA " in uppercase followed by 1space and XXXXXXXX is the name of the RETmanufacturer in uppercase

Class 3

Presence required

Visibility customer

Range [0..128]


Initial value N.A.

dnsServer

Parameter name dnsServer

Domain BTS

Description IP address of DNS server, meaningful only if

126


Class 3

Presence optional

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

managerAddress

Parameter name managerAddress

Domain BTS

Description IP address of Manager, meaningful only if

Class 3

Presence optional

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

managerFqdn

Parameter name managerFqdn

Domain BTS

Description Fully Qualified Domain Name of the manager, forinstance: mngr1.<domain>, meaningful if

Class 3

Presence optional

Visibility customer

Range NA


Initial value N.A.

managerSpec

Parameter name managerSpec

Domain BTS

Class 3

Presence required

127


Visibility customer

Range fqdnManagerSpec, addressManagerSpec, noneM-anagerSpec


Initial value N.A.

userSpecificInfo


Domain OAM


Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

128


18 EdchConf (EdchConf)





Parents:

BTSEquipment - BTSCell - EdchConf

Child(ren):

EdchServiceParameterSet -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..0]

Data Type Decimal

Initial Value

129


commonERGCHPowerOffset

Parameter name commonERGCHPowerOffset

Domain BTS

Class 3

Presence required

Visibility customer

Unit dB

Range [-35.0..15.0] step:0.1

Data type Signed

Initial value -35.0

deltaDownServingCellNoHO

Parameter name deltaDownServingCellNoHO

Domain BTS

Class 3

Presence required

Visibility customer

Unit dB

Range [0.000..1.000] step:0.001

Data type Decimal

Initial value 0.020

duplexOffsetForEagchPowerControl

Parameter name duplexOffsetForEagchPowerControl

Domain BTS

Description This parameter defines the offset between UL andDL path loss applied for path loss estimation for E-AGCH power control in Node B. (UL path loss islower than the DL path loss). This offset dependson the UMTS operating band.

Class 3

Presence required

Visibility customer

Unit dB

Range [-20.0..0.0] step:0.1

Data type Signed

130


Initial value -1.4

eDchResourceId

Parameter name eDchResourceId

Domain BTS

Description The BTS uses this parameter, depending on thevalue of the parameter RfCarri-er.hspaHardwareAllocation, to allocate EDCH on E-BBU of iCEM. When the BTS allocates EDCH oniCEM (according to parameter hspaHardwareAlloc-ation), all BTS CELL using the same ed-chResourceId will be allocated on the same E-BBUof an iCEM. Default value = Associated local-CellGroupId. Specific Check: all BTS CELL usingthe same edchResourceId shall also have the samelocalCellGroupId. Specific Check: all BTS CELLwith the same localCellGroupId shall be configuredwith the same edchResourceId.

Class 0

Presence required

Visibility customer

Range [0..5]

Data type Decimal

Initial value N.A.

eagchPathLossValue

Parameter name eagchPathLossValue

Domain BTS

Description This table defines the different DL path lossthresholds applied for E-AGCH power control inNode B (see parameter eagchPowerValue).

Class 3

Presence required

Visibility customer

Unit dB

Range [100.0..200.0] step:0.1

Data type Fixed[1..5] List of Decimal

Initial value 135.0,130.0,125.0,120.0,115.0

131


eagchPower

Parameter name eagchPower

Domain BTS

Description The power level relative to primary CPICH of thecell, devoted to one e-AGCH channel is indicatedhere when the fixed mode is chosen

Class 3

Presence required

Visibility customer

Unit dB

Range [-35.0..15.0] step:0.1

Data type Signed

Initial value -12.5

eagchPowerControlMode

Parameter name eagchPowerControlMode

Domain BTS

Description This parameter indicates how to perform the powercontrol on the eAGCH channel Note: fixedPower-Level is the only value allowed in this release

Class 3

Presence required

Visibility customer

Range fixed, dynamic


Initial value fixed

eagchPowerControlModeXcem

Parameter name eagchPowerControlModeXcem

Domain BTS

Class 3

Presence required

Visibility customer



Initial value dynamic

132


eagchPowerOffset

Parameter name eagchPowerOffset

Domain BTS

Class 3

Presence required

Visibility customer

Unit dB

Range [-45.0..65.0] step:0.1

Data type Signed

Initial value 10.0

eagchPowerValue

Parameter name eagchPowerValue

Domain BTS

Description This table defines the different E-AGCH transmis-sion power values (relative to CPICH), according tothe DL path loss estimated by the Node B, appliedfor E-AGCH power control in Node B.

Class 3

Presence required

Visibility customer

Unit dB

Range [-28.0..28.0] step:0.1

Data type Fixed[1..6] List of Signed

Initial value -12.5,-12.5,-12.5,-12.5,-12.5,-12.5

edchInactivityTimerXcem

Parameter name edchInactivityTimerXcem

Domain BTS

Class 3

Presence required

Visibility customer

Unit ms

Range [0..20000] step:40

Data type Decimal

133


Initial value 480

edchInitialTBIndex10msTTI

Parameter name edchInitialTBIndex10msTTI

Domain BTS

Class 0

Presence required

Visibility customer

Range [0..127]

Data type Decimal

Initial value 7

edchInitialTBIndex2msTTI

Parameter name edchInitialTBIndex2msTTI

Domain BTS

Class 0

Presence required

Visibility customer

Range [0..127]

Data type Decimal

Initial value 8

edchNumCommonRgPerCode

Parameter name edchNumCommonRgPerCode

Domain BTS

Class 3

Presence required

Visibility customer

Range [0..4]

Data type Decimal

Initial value 2

edchSofterHoLimit

Parameter name edchSofterHoLimit

134


Domain BTS

Class 3

Presence required

Visibility customer

Unit %

Range [0..100]

Data type Decimal

Initial value 100

edchSpiRelativeWeight

Parameter name edchSpiRelativeWeight

Domain BTS

Class 0

Presence required

Visibility customer

Range [0..100]


Initial value 100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100

ehichErrorProbability

Parameter name ehichErrorProbability

Domain BTS

Class 3

Presence required

Visibility customer

Range [1..255]

Data type Decimal

Initial value 10

ehichPowerControlMode

Parameter name ehichPowerControlMode

Domain BTS

Description This parameter indicates how to perform the powercontrol on the eHICH channel Possible values: 0 =fixedPowerLevel- Itl is the only value allowed in this

135


release

Class 3

Presence required

Visibility customer



Initial value fixed

ehichPowerSignature

Parameter name ehichPowerSignature

Domain BTS

Description The power relative to primary CPICH of the cell, de-voted to one e-HICH signature is indicated herewhen the fixed mode is chosen

Class 3

Presence required

Visibility customer

Unit dB

Range [-35.0..15.0] step:0.1

Data type Signed

Initial value -28.6

Recommended value -8.0

ergchPowerControlMode

Parameter name ergchPowerControlMode

Domain BTS

Description This parameter indicates how to perform the powercontrol on the eRGCH channel Note: fixedPower-Level is the only value allowed in this release

Class 3

Presence required

Visibility customer



Initial value fixed

136


ergchPowerSignature

Parameter name ergchPowerSignature

Domain BTS

Description The power relative to primary CPICH of the cell, de-voted to one e-RGCH signature is indicated herewhen the fixed mode is chosen.

Class 0

Presence required

Visibility customer

Unit dB

Range [-35.0..15.0] step:0.1

Data type Signed

Initial value -28.6

Recommended value -22.0

harqType

Parameter name harqType

Domain BTS

Description Type of HARQ that can be managed by the BTS.Possible value: 1 =M IR ( MixIncrementalRedund-ancy) 2 = PIR (PartialIncrementalRedundancy)

Class 0

Presence required

Visibility customer

Range mirType, pirType


Initial value mirType

maxEdchCommonChannelPower

Parameter name maxEdchCommonChannelPower

Domain BTS

Description Note: this parameter is currently not used. Themaximum power relative to primary CPICH that canbe used by eagch, ehich and ergch channels ateach instant. eagchPower +Somme(ehichPowerSignature) +Somme(ergchPowerSignature) =< maxEdchCom-monChannelPower

137


Class 3

Presence required

Visibility customer

Unit dB

Range [-35.0..15.0] step:0.1

Data type Signed

Initial value 0


maxPowerCorrection

Parameter name maxPowerCorrection

Domain BTS

Class 3

Presence required

Visibility customer

Unit dB

Range [-12.8..12.7] step:0.1

Data type Signed

Initial value 3.0

minPowerCorrection

Parameter name minPowerCorrection

Domain BTS

Class 3

Presence required

Visibility customer

Unit dB

Range [-12.8..12.7] step:0.1

Data type Signed

Initial value 3.0

nonServingEHICHPowerOffset

Parameter name nonServingEHICHPowerOffset

138


Domain BTS

Class 3

Presence required

Visibility customer

Unit dB

Range [-35.0..15.0] step:0.1

Data type Signed

Initial value -35.0

pMaxDlEDCH

Parameter name pMaxDlEDCH

Domain BTS

Class 3

Presence required

Visibility customer

Unit dB

Range [-35.0..15.0] step:0.1

Data type Signed

Initial value 6.0

pMinDlEDCH

Parameter name pMinDlEDCH

Domain BTS

Class 3

Presence required

Visibility customer

Unit dB

Range [-35.0..15.0] step:0.1

Data type Signed

Initial value -18.0

powerOffsetERGCHServingNoSHO

Parameter name powerOffsetERGCHServingNoSHO

Domain BTS

Class 3

139


Presence required

Visibility customer

Unit dB

Range [-12.8..12.7] step:0.1

Data type Signed

Initial value 1.5

powerOffsetERGCHServingSHO

Parameter name powerOffsetERGCHServingSHO

Domain BTS

Class 3

Presence required

Visibility customer

Unit dB

Range [-12.8..12.7] step:0.1

Data type Signed

Initial value 1.5

rotMarginPrediction

Parameter name rotMarginPrediction

Domain BTS

Class 3

Presence required

Visibility customer

Range [0..10]

Data type Decimal

Initial value 3

rotOrthogonalityEstimation

Parameter name rotOrthogonalityEstimation

Domain BTS

Class 3

Presence required

Visibility customer

Range off, on

140



Initial value off

rotPredictionCorrection

Parameter name rotPredictionCorrection

Domain BTS

Class 3

Presence required

Visibility customer

Range off, on


Initial value on

ttiType

Parameter name ttiType

Domain BTS

Description TTI to be used by the BTS according to the UE cap-ability. Possible values 10ms and 2ms If 10ms, theBTS will always use 10 ms even if the UE is able of2ms TTI If 2ms, the BTS will use the UE capabilityNote: Only value 10 will be managed by the BTS inthis releas

Class 3

Presence required

Visibility customer

Unit ms

Range 2ms, 10ms


Initial value 10ms

userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

141


Range [0..30]


Initial value N.A.

142


19 EdchServiceParameterSet (EdchServiceParameterSet)





Parents:

BTSEquipment - BTSCell - EdchConf - EdchServiceParameterSet

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..3]

Data Type Decimal

Initial Value

143


schedulingPriorityLevel

Parameter name schedulingPriorityLevel

Domain BTS

Class 3

Presence required

Visibility customer

Range [0..15]

Data type Decimal

Initial value N.A.

Def value comments Refer to Instances Sheet

Rec val comments

serviceBFactor

Parameter name serviceBFactor

Domain BTS

Class 3

Presence required

Visibility customer

Range [1..30]

Data type Decimal

Initial value N.A.


Rec val comments

serviceKFactor

Parameter name serviceKFactor

Domain BTS

Class 3

Presence required

Visibility customer

Range [1..30]

Data type Decimal

Initial value N.A.


Rec val comments

144


serviceMaxRate

Parameter name serviceMaxRate

Domain BTS

Class 3

Presence required

Visibility customer

Unit Kbits/s

Range [0..10000]

Data type Decimal

Initial value N.A.


Rec val comments

serviceMinRate

Parameter name serviceMinRate

Domain BTS

Class 3

Presence required

Visibility customer

Unit Kbits/s

Range [0..10000]

Data type Decimal

Initial value N.A.


Rec val comments

userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

145


146


20 ExtensionCabinet (ExtensionCabinet)





Parents:

BTSEquipment - ExtensionCabinet

Child(ren):

ExternalAlarms - UserAlarms -

Identifiers:


MaxIn-stances


Links:


siteName Site

Parameters:

rdnId


Domain BTS

Description

Class NA

Presence required

Visibility customer

Unit

Range [1..1]

Data Type Decimal

147


Initial Value

aliasName


Domain OAM

Class NA

Presence optional

Visibility customer

Range NA


Initial value N.A.

fiberRoundTripDelay

Parameter name fiberRoundTripDelay

Domain BTS

Class NA

Presence optional

Visibility customer

Range [0..2147483647]

Data type Decimal

Initial value N.A.

siteName


Domain OAM

Description Name of the associated Site

Class NA

Presence optional

Visibility customer

Range Site


Initial value N.A.

supervisedExternalAlarmMask

148


Parameter name supervisedExternalAlarmMask

Domain BTS

Class 3

Presence required

Visibility customer

Range [16..16]

Data type BitString


supervisedUserAlarmMask

Parameter name supervisedUserAlarmMask

Domain BTS

Class 3

Presence required

Visibility customer

Range [8..8]

Data type BitString


userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

149


21 ExternalAlarm (ExternalAlarm)





Parents:

BTSEquipment - RemoteRadioHead - ExternalAlarms - ExternalAlarm

BTSEquipment - ExtensionCabinet - ExternalAlarms - ExternalAlarm

BTSEquipment - ExternalAlarms - ExternalAlarm

Child(ren):

-

Identifiers:


MaxIn-stances

equipment-Number


Links:


Parameters:

equipmentNumber

Parameter name equipmentNumber

Domain OAM

Description The equipment number of the external alarm

Class NA

Presence required

Visibility customer

Unit

150


Range [1..24]

Data Type Decimal

Initial Value

alarmCode

Parameter name alarmCode

Domain OAM

Class NA

Presence optional

Visibility customer

Range [1..5]

Data type Bcd

Initial value N.A.

alarmMessage

Parameter name alarmMessage

Domain OAM

Description The message to be display for this external alarm

Class NA

Presence required

Visibility customer

Range [0..256]


Initial value N.A.

severity

Parameter name severity

Domain OAM

Class NA

Presence optional

Visibility customer

Range minor, warning, major, critical


Initial value N.A.

151


userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

Range NA


Initial value N.A.

152


22 ExternalAlarms (ExternalAlarms)





Parents:

BTSEquipment - RemoteRadioHead - ExternalAlarms

BTSEquipment - ExtensionCabinet - ExternalAlarms

BTSEquipment - ExternalAlarms

Child(ren):

ExternalAlarm -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain OAM

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..0]

153


Data Type Decimal

Initial Value

userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

Range NA


Initial value N.A.

154


23 HsXpaResource (HsXpaResource)





Parents:

BTSEquipment - HsXpaResource

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..5]

Data Type Decimal

Initial Value

155


capacity

Parameter name capacity

Domain BTS

Description This parameter is not used any longer in UA06 withthe BTS load supporting multimode BBU on xCEM.

Class 0

Presence required

Visibility customer

Unit CE

Range 64, 128


Initial value 128

Rel version comments Release warning: This parameter is not used anylonger in UA06 with the BTS load supporting mul-timode BBU on xCEM.

edchMaxThroughputXcem

Parameter name edchMaxThroughputXcem

Domain BTS

Description Maximum throughput in Kb/s for EDCH traffic(MAC-e layer) that can be used by the HSXPA RE-SOURCE (that is on a xCEM)

Class 3

Presence required

Visibility customer

Unit Kbits/s

Range [480..7680] step:480

Data type Decimal

Initial value 7680

hsdpaMaxThroughputXcem

Parameter name hsdpaMaxThroughputXcem

Domain BTS

Description Maximum throughput in Kb/s for HSDPA traffic(MAC-hs layer) that can be used by the HSXPARESOURCE (that is on a xCEM)

Class 3

156


Presence required

Visibility customer

Unit Kbits/s

Range [1800..28800] step:1800

Data type Decimal

Initial value 28800

hsxpaGuaranteeCapacity

Parameter name hsxpaGuaranteeCapacity

Domain BTS

Description This parameter is not used in this release

Class 3

Presence required

Visibility customer

Range [0..128]

Data type Decimal

Initial value 0

Rel version comments Release warning: This parameter is not used in thisrelease

userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

157


24 HsdpaConf (HsdpaConf)





Parents:

BTSEquipment - BTSCell - HsdpaConf

Child(ren):

HsdpaMaxUeCategoryCapabilityActivation - HsdpaUeCategoryTransportBlockOptimisation -HsdschServiceParameterSet -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description CounterFamily identifier on NE interface

Class NA

Presence required

Visibility customer

Unit

Range [0..0]

Data Type Decimal

158


Initial Value

dchPowerMargin

Parameter name dchPowerMargin

Domain BTS

Description Power margin in percentage of DCH power thatcannot be used for HSDPA.

Class 3

Presence required

Visibility customer

Unit %

Range [0..100]

Data type Decimal

Initial value 20

edchEstimatedMaxTotalDlPower

Parameter name edchEstimatedMaxTotalDlPower

Domain BTS

Class 3

Presence required

Visibility customer

Unit dB

Range [-35.0..15.0] step:0.1

Data type Signed

Initial value -1.5

harqNbMaxRetransmissions

Parameter name harqNbMaxRetransmissions

Domain BTS

Description Maximum number of allowed radio retransmissions

Class 3

Presence required

Visibility customer

Range [0..31]

Data type Decimal

159


Initial value 7

harqNbMaxRetransmissionsXcem

Parameter name harqNbMaxRetransmissionsXcem

Domain BTS

Class 0

Presence required

Visibility customer

Range [0..31]

Data type Decimal

Initial value 7

harqTargNumTransmissionsXcem

Parameter name harqTargNumTransmissionsXcem

Domain BTS

Class 0

Presence required

Visibility customer

Range [1..20]

Data type Decimal

Initial value 8

harqType

Parameter name harqType

Domain BTS

Description definition "HARQ redundancy version to apply Pos-sible value = {MIR = 1, PIR = 2, CC = 3} MIR =MixIncrementalRedundancy PIR = PartialIncre-mentalRedundancy CC = ChaseCombining

Class 3

Presence required

Visibility customer

Range mirType, pirType, ccType, drType, MIRWith-PowerAdaptation, PIRWithPowerAdaptation,CCWithPowerAdaptation, DRWithPowerAdaptation


160


Initial value DRWithPowerAdaptation

harqTypeXcem

Parameter name harqTypeXcem

Domain BTS

Class 3

Presence required

Visibility customer

Range irType, ccType


Initial value irType

hsdpaAdjustBlerToChannelVariation

Parameter name hsdpaAdjustBlerToChannelVariation

Domain BTS

Class 3

Presence required

Visibility customer

Range false, true


Initial value true

hsdpaAmpUsage

Parameter name hsdpaAmpUsage

Domain BTS

Class 3

Presence required

Visibility customer

Unit %

Range [0..100]

Data type Decimal

Initial value 100

hsdpaBlerObservationWindow

161


Parameter name hsdpaBlerObservationWindow

Domain BTS

Description This parameter provides the update period for theCQI offset to apply on received CQI, used by CQIBLER adjustment algorithm. It is expressed in num-ber of TTI where a new transmission occurred forcorresponding UE. This parameter is used only ifparameter hsdpaCqiBlerAdjustment is set to outer-LoopLikeAlgo

Class 3

Presence required

Visibility customer

Unit TTIs

Range [1..100]

Data type Decimal

Initial value 10

hsdpaBlerStepSize

Parameter name hsdpaBlerStepSize

Domain BTS

Description This parameter provides the step size for CQIBLER adjustment algorithm, in case a NACK is re-ceived. This parameter is used only if parameter hs-dpaCqiBlerAdjustment is set to outerLoopLikeAlgo.

Class 3

Presence required

Visibility customer

Unit CQI

Range [0.1..1.0] step:0.1

Data type Decimal

Initial value 0.1

hsdpaBlerTargetLowerLimit

Parameter name hsdpaBlerTargetLowerLimit

Domain BTS

Description This parameter indicates the minimum BLER targetacceptable for HS-DSCH, used by CQI BLER ad-justment algorithm. This parameter is used only ifparameter hsdpaCqiBlerAdjustment is set to outer-

162


LoopLikeAlgo.

Class 3

Presence required

Visibility customer

Unit %

Range [1..99]

Data type Decimal

Initial value 10

hsdpaBlerTargetLowerLimitXcem

Parameter name hsdpaBlerTargetLowerLimitXcem

Domain BTS

Class 0

Presence required

Visibility customer

Unit %

Range [1..99]

Data type Decimal

Initial value 1

hsdpaBlerTargetMediumLimit

Parameter name hsdpaBlerTargetMediumLimit

Domain BTS

Class 3

Presence required

Visibility customer

Unit %

Range [1..99]

Data type Decimal

Initial value 20

hsdpaBlerTargetUpperLimit

Parameter name hsdpaBlerTargetUpperLimit

Domain BTS

Description This parameter indicates the BLER target for HS-

163


DSCH, used by CQI BLER adjustment algorithm.This parameter is used only if parameter hsdpaCqi-BlerAdjustment is set to outerLoopLikeAlgo.

Class 3

Presence required

Visibility customer

Unit %

Range [1..99]

Data type Decimal

Initial value 30

hsdpaBlerTargetUpperLimitXcem

Parameter name hsdpaBlerTargetUpperLimitXcem

Domain BTS

Class 0

Presence required

Visibility customer

Unit %

Range [1..99]

Data type Decimal

Initial value 20

hsdpaCqiBlerAdjustmentAlgo

Parameter name hsdpaCqiBlerAdjustmentAlgo

Domain BTS

Description This parameter activates the algorithm of CQI ad-justment based on BLER measurement. Note1: inUA4.2, the algorithm

Class 3

Presence required

Visibility customer

Range deactivated, blerRangeBasedAlgo, outerLoop-LikeAlgo, dynamicOuterLoopAlgo


Initial value blerRangeBasedAlgo

164


hsdpaCqiBlerAdjustmentAlgorithmXcem

Parameter name hsdpaCqiBlerAdjustmentAlgorithmXcem

Domain BTS

Class 3

Presence required

Visibility customer

Range deactivated, constBLERTarget, dynamicHARQTx-Target


Initial value constBLERTarget

hsdpaFlexibleModulationVsCodeActivation

Parameter name hsdpaFlexibleModulationVsCodeActivation

Domain BTS

Class 3

Presence required

Visibility customer

Range false, true


Initial value false

hsdpaFullPowerUsage

Parameter name hsdpaFullPowerUsage

Domain BTS

Class 3

Presence required

Visibility customer

Range false, true


Initial value false

hsdpaGbrIncreaseFactorForMobility

Parameter name hsdpaGbrIncreaseFactorForMobility

Domain BTS

Class 3

165


Presence required

Visibility customer

Unit %

Range [0..100]

Data type Decimal

Initial value 0

hsdpaGbrNbNeededTtiForgettingFactor

Parameter name hsdpaGbrNbNeededTtiForgettingFactor

Domain BTS

Class 3

Presence required

Visibility customer

Range [0..11]

Data type Decimal

Initial value 8

hsdpaGbrNbUePerTtiForgettingFactor

Parameter name hsdpaGbrNbUePerTtiForgettingFactor

Domain BTS

Class 3

Presence required

Visibility customer

Range [0..11]

Data type Decimal

Initial value 8

hsdpaGbrTbSizeMonitoringForgettingFactorPerSpi

Parameter name hsdpaGbrTbSizeMonitoringForgettingFactorPerSpi

Domain BTS

Class 3

Presence required

Visibility customer

Range [0..11]


166


Initial value 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8

hsdpaMinAmpUsage

Parameter name hsdpaMinAmpUsage

Domain BTS

Class 3

Presence required

Visibility customer

Unit %

Range [0..100]

Data type Decimal

Initial value 0

hsdpaResourceId

Parameter name hsdpaResourceId

Domain BTS

Description The BTS uses this parameter, depending on thevalue of the parameter RfCarri-er.hspaHardwareAllocation, to allocate HSDPA onH-BBU of iCEM When the BTS allocates HSDPAon iCEM (according to parameter hspaHardwareAl-location), all BTS CELL using the same hsdpaRe-sourceId will be allocated on the same H-BBU of aniCEM and use the parameter settings of corres-ponding hsdpaResource object instance. Note: thisparameter is not used for xCEM Default value = As-sociated localCellGroupId Specific Check: all BTSCELL using the same hsdpaResourceId shall alsohave the same localCellGroupId.

Class 0

Presence required

Visibility customer

Range [0..5]

Data type Decimal

Initial value N.A.

hsdpaSchedulerAlgorithm

Parameter name hsdpaSchedulerAlgorithm

167


Domain BTS

Description Algorithm to use for the HSDPA scheduler

Class 3

Presence required

Visibility customer

Range Alcatel-Lucent, proportionalFair, roundRobin, max-CtoI, fair


Initial value Alcatel-Lucent

hsdpaSchedulerAlgorithmXcem

Parameter name hsdpaSchedulerAlgorithmXcem

Domain BTS

Class 3

Presence required

Visibility customer

Range cRMax, unconstrained, fairThroughput, proportion-alThroughput, maxCtoI


Initial value proportionalThroughput

hsdpaSchedulerWeightingFactor

Parameter name hsdpaSchedulerWeightingFactor

Domain BTS

Description This parameter is used to compute a weightingfactor for the averaging window used by the costfunction of the scheduler. This parameter is onlyused for: "Alcatel-Lucent and "proportionalFair"schedulerAlgorithm. The weighting factor is:(2exp(hsdpaSchedulerWeightingFactor) -1) / (2exp(hsdpaSchedulerWeightingFactor)) Note: when theparameter is set to 0, the HSDPA scheduler al-gorithm will behave has a max C/I algorithm (seehsdpaSchedulerAlgorithm parameter)

Class 3

Presence required

Visibility customer

Range [1..8]

Data type Decimal

168


Initial value 5

hsdpaSchedulerWeightingFactorXcem

Parameter name hsdpaSchedulerWeightingFactorXcem

Domain BTS

Class 0

Presence required

Visibility customer

Range [1..8]

Data type Decimal

Initial value 8

hsdpaSpiRelativeWeight

Parameter name hsdpaSpiRelativeWeight

Domain BTS

Description This parameter gives a weight to increase or de-crease the data rate according to the SPI. Note1:SPI = Scheduler Priority Indicator. SPI goes from 0to 15. Note2: If all weights are equal to 100, SPImanagement is deactivated

Class 3

Presence required

Visibility customer

Range [1..100]


Initial value 100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100

hsdpaUeCategoryThroughputWeighting

Parameter name hsdpaUeCategoryThroughputWeighting

Domain BTS

Description This parameter states the way UE category are bal-anced in the scheduler in case of resource limitation(code or power). The same throughput can beprovided in average to all UE categories as soon asthey report the same CQI, or the throughput can de-pend on their max capability (depending on the re-ported CQI). This only applies to "Alcatel-Lucent" or

169


"proportional fair" algorithm... Possible values: * 0:ueCategoryEquity * 1: ueCategoryProportionalityueCategoryEquity :same throughput to all UE cat-egory with same CQI in case of resource limitation.ueCategoryProportionality : throughput depends onthe UE cat: e.g. below CQI 15, all UE categorieshave the same throughput, above, UE cat 6 or 10have a higher throughput than UE cat 12.

Class 3

Presence required

Visibility customer

Range ueCategoryEquity, ueCategoryProportionality


Initial value ueCategoryProportionality

hsdpaUeCategoryThroughputWeightingXcem

Parameter name hsdpaUeCategoryThroughputWeightingXcem

Domain BTS

Class 0

Presence required

Visibility customer

Range ueCategoryEquity, ueCategoryProportionality


Initial value ueCategoryProportionality

hsdschInterval

Parameter name hsdschInterval

Domain BTS

Description This parameter corresponds to: - The timer validityfor allocated data sent to RNC in Capacity Alloca-tion message -The minimum time between two Ca-pacity Allocation send by NodeB

Class 3

Presence required

Visibility customer

Unit ms

Range [10..500] step:10

Data type Decimal

170


Initial value 50

hsscchPcOffset

Parameter name hsscchPcOffset

Domain BTS

Description Each offset is indexed by CQI (Channel Quality In-dicator) from CQI=1 to CQI=30 1st elementPoweroffset for UE with CQI 1 30th eleme Power offset forUE with CQI 30 The element for CQI<x> representsthe power offset according to the CPICH to apply tothe HSSCCH channel for UEs reporting a CQI =<x>

Class 3

Presence required

Visibility customer

Unit dB

Range [-28.0..28.0] step:0.1

Data type Fixed[1..30] List of Signed

Initial value 0,0,0,0,0,0,0,0,0,-3,-3,-5,-5,-8,-8,-8,-8,-8,-8,-8,-8,-8,-8,-8,-8,-8,-8,-8,-8,-8

hsscchSnr

Parameter name hsscchSnr

Domain BTS

Class 3

Presence required

Visibility customer

Unit dB

Range [-5.0..19.0] step:0.1

Data type Signed

Initial value 5.0

maxRateGrowth

Parameter name maxRateGrowth

Domain BTS

Description Overestimation factor for allocated credits MAC-dPDU.

Class 3

171


Presence required

Visibility customer

Range [4..16]

Data type Decimal

Initial value 8

txCarrierPowerNotHsxpaComputation

Parameter name txCarrierPowerNotHsxpaComputation

Domain BTS

Class 3

Presence required

Visibility customer

Range edchDlPowerIncluded, edchConfiguredDlPowerRe-moved


Initial value edchDlPowerIncluded

userSpecificInfo


Domain OAM

Description Information field reserved to the user. No specifictreatment on this field is performed by the system.

Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

172


25 HsdpaMaxUeCategoryCapabilityActivation(HsdpaMaxUeCategoryCapabilityActivation)





Parents:

BTSEquipment - BTSCell - HsdpaConf - HsdpaMaxUeCategoryCapabilityActivation

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..0]

Data Type Decimal

173


Initial Value

ueCategory1

Parameter name ueCategory1

Domain BTS

Description This parameter allows to enhance the CQI mappingtables (as proposed in spec 3GPP TS 25.214) in or-der to provide the maximum throughput handled bythe UE category

Class 3

Presence required

Visibility customer

Range false, true


Initial value false

ueCategory10


Domain BTS


Class 3

Presence required

Visibility customer

Range false, true


Initial value false

ueCategory11


Domain BTS


174


Class 3

Presence required

Visibility customer

Range false, true


Initial value false

ueCategory12


Domain BTS


Class 3

Presence required

Visibility customer

Range false, true


Initial value true

ueCategory2


Domain BTS


Class 3

Presence required

Visibility customer

Range false, true


Initial value false

ueCategory3


175


Domain BTS


Class 3

Presence required

Visibility customer

Range false, true


Initial value false

ueCategory4


Domain BTS


Class 3

Presence required

Visibility customer

Range false, true


Initial value false

ueCategory5


Domain BTS


Class 3

Presence required

Visibility customer

Range false, true


176


Initial value false

ueCategory6


Domain BTS


Class 3

Presence required

Visibility customer

Range false, true


Initial value false

ueCategory7


Domain BTS


Class 3

Presence required

Visibility customer

Range false, true


Initial value true

ueCategory8


Domain BTS


177


Class 3

Presence required

Visibility customer

Range false, true


Initial value true

ueCategory9


Domain BTS


Class 3

Presence required

Visibility customer

Range false, true


Initial value false

userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

178


26 HsdpaUeCategoryTransportBlockOptimisation(HsdpaUeCategoryTransportBlockOptimisation)





Parents:

BTSEquipment - BTSCell - HsdpaConf - HsdpaUeCategoryTransportBlockOptimisation

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..0]

Data Type Decimal

179


Initial Value

ueCategory1


Domain BTS

Description This parameter allows to enhance the CQI mappingtables by modifying the transport block sizes ac-cording to the MAC-d PDU size in order to reducethe number of padding bits. This should improve theperformances

Class 3

Presence required

Visibility customer

Range false, true


Initial value true

ueCategory10


Domain BTS


Class 3

Presence required

Visibility customer

Range false, true


Initial value true

ueCategory11


Domain BTS

Description This parameter allows to enhance the CQI mappingtables by modifying the transport block sizes ac-cording to the MAC-d PDU size in order to reduce

180


the number of padding bits. This should improve theperformances

Class 3

Presence required

Visibility customer

Range false, true


Initial value true

ueCategory12


Domain BTS


Class 3

Presence required

Visibility customer

Range false, true


Initial value true

ueCategory2


Domain BTS


Class 3

Presence required

Visibility customer

Range false, true


Initial value true

181


ueCategory3


Domain BTS


Class 3

Presence required

Visibility customer

Range false, true


Initial value true

ueCategory4


Domain BTS


Class 3

Presence required

Visibility customer

Range false, true


Initial value true

ueCategory5


Domain BTS


182


Class 3

Presence required

Visibility customer

Range false, true


Initial value true

ueCategory6


Domain BTS


Class 3

Presence required

Visibility customer

Range false, true


Initial value true

ueCategory7


Domain BTS


Class 3

Presence required

Visibility customer

Range false, true


Initial value true

183


ueCategory8


Domain BTS


Class 3

Presence required

Visibility customer

Range false, true


Initial value true

ueCategory9


Domain BTS


Class 3

Presence required

Visibility customer

Range false, true


Initial value true

userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

Range [0..30]


184


Initial value N.A.

185


27 HsdschServiceParameterSet (HsdschServiceParameterSet)





Parents:

BTSEquipment - BTSCell - HsdpaConf - HsdschServiceParameterSet

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..15]

Data Type Decimal

Initial Value

186


serviceBFactor

Parameter name serviceBFactor

Domain BTS

Class 3

Presence required

Visibility customer

Range [1..30]

Data type Decimal

Initial value 7


Rec val comments

serviceFilterFactor

Parameter name serviceFilterFactor

Domain BTS

Class 3

Presence required

Visibility customer

Range [1..11]

Data type Decimal

Initial value 8

serviceHighRate

Parameter name serviceHighRate

Domain BTS

Class 3

Presence required

Visibility customer

Unit Kbits/s

Range [0..10000]

Data type Decimal

Initial value 1000

serviceKFactor

187


Parameter name serviceKFactor

Domain BTS

Class 3

Presence required

Visibility customer

Range [1..30]

Data type Decimal

Initial value 7


Rec val comments

serviceLowRate

Parameter name serviceLowRate

Domain BTS

Class 3

Presence required

Visibility customer

Unit Kbits/s

Range [0..10000]

Data type Decimal

Initial value 0

serviceMaxDelay

Parameter name serviceMaxDelay

Domain BTS

Class 3

Presence required

Visibility customer

Unit ms

Range [0..10000] step:2

Data type Decimal

Initial value 0


Rec val comments

188


serviceMaxRate

Parameter name serviceMaxRate

Domain BTS

Class 3

Presence required

Visibility customer

Unit Kbits/s

Range [0..100000]

Data type Decimal

Initial value 300


Rec val comments

serviceMinRate

Parameter name serviceMinRate

Domain BTS

Class 3

Presence required

Visibility customer

Unit Kbits/s

Range [0..10000]

Data type Decimal

Initial value 40


Rec val comments

userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

189


190


28 ImaGroup (ImaGroup)





Parents:

BTSEquipment - ImaGroup

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description ImaGroup identifier

Class NA

Presence required

Visibility customer

Unit

Range [0..1]

Data Type Decimal

Initial Value

191


imaDefenseDelay

Parameter name imaDefenseDelay

Domain BTS

Description If present, indicates the ImaDefense is activatedand contains the Time laps to wait before consider-ing that the defense action has to be started.

Class 3

Presence optional

Visibility customer

Unit s

Range [0..300]

Data type Decimal

Initial value N.A.

imaPcmList

Parameter name imaPcmList

Domain BTS

Description list PCM (bit string 0..8) in IMA group

Class 0

Presence required

Visibility customer

Range PCM


Initial value N.A.


imaWeightingFactor

Parameter name imaWeightingFactor

Domain BTS

Description Weighting factor used to adapt PCM capacity toCEM ones

Class 3

Presence required

Visibility customer

192


Unit %

Range [50..250]

Data type Decimal

Initial value N.A.

signallingReservedBandwidth

Parameter name signallingReservedBandwidth

Domain BTS

Description This parameter is the percentage of the IMA groupbandwidth to be deduced for OAM and signallingtraffic.

Class 3

Presence required

Visibility customer

Unit %

Range [0..100]

Data type Decimal

Initial value 0

userSpecificInfo


Domain OAM


Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

193


29 InventoryComponent (InventoryComponent)





Parents:

BTSEquipment - InventoryComponent

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..4294967295]

Data Type Decimal

Initial Value

194


cabinetNumber


Domain BTS

Class NA

Presence required

Visibility customer

Range [0..2147483647]

Data type Decimal

Initial value N.A.

hardwareRelease


Domain BTS

Class NA

Presence required

Visibility customer

Range [0..4]


Initial value N.A.

manufacturerInfo


Domain BTS

Class NA

Presence optional

Visibility customer

Range [0..64]


Initial value N.A.

manufacturingDate


Domain BTS

Class NA

195


Presence optional

Visibility customer

Range [0..4]


Initial value N.A.

moduleApplication


Domain BTS

Class NA

Presence required

Visibility customer



Initial value N.A.

moduleName


Domain BTS

Class NA

Presence required

Visibility customer

Range [0..30]


Initial value N.A.

moduleSubType


Domain BTS

Class NA

Presence required

Visibility customer

Range [0..15]

Data type Decimal

Initial value N.A.

196


moduleType


Domain BTS

Class NA

Presence required

Visibility customer

Range [0..2147483647]

Data type Decimal

Initial value N.A.

pecCode


Domain BTS

Class NA

Presence required

Visibility customer

Range [0..16]


Initial value N.A.

positionInShelf


Domain BTS

Class NA

Presence required

Visibility customer

Range [1..255]

Data type Decimal

Initial value N.A.

serialNumber


Domain BTS

Class NA

197


Presence required

Visibility customer

Range [0..25]


Initial value N.A.

shelfNumber


Domain BTS

Class NA

Presence required

Visibility customer

Range [0..10]

Data type Decimal

Initial value N.A.

198


30 IpInterface (IpInterface)





Parents:

BTSEquipment - IpInterface

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description IpInterface identifier

Class NA

Presence required

Visibility customer

Unit

Range [0..0]

Data Type Decimal

Initial Value

199


administrativeState


Domain BTS


Class 3

Presence required

Visibility customer





availabilityStatus


Domain BTS


Class NA

Presence required

Visibility customer



Initial value N.A.


ipInterfaceType

Parameter name ipInterfaceType

Domain BTS

Description Type of physical interface supporting this IP inter-face.

Class 0

Presence required

200


Visibility customer

Range interfaceTypeEthernet


Initial value interfaceTypeEthernet

Def value comments This value coresponds to interfaceTypeEthernet

operationalState


Domain BTS


Class NA

Presence required

Visibility customer





userSpecificInfo


Domain OAM


Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

201


31 IpRan (IpRan)





Parents:

BTSEquipment - IpRan

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..0]

Data Type Decimal

Initial Value

202


dhcpUsed

Parameter name dhcpUsed

Domain BTS

Class 0

Presence optional

Visibility customer

Range false, true


Initial value N.A.

ethernetVLANId

Parameter name ethernetVLANId

Domain BTS

Class 0

Presence optional

Visibility customer

Range [1..4094]

Data type Decimal

Initial value N.A.

heartBeatUDPPortNumber

Parameter name heartBeatUDPPortNumber

Domain BTS

Class 0

Presence required

Visibility customer

Range [49152..65535]

Data type Decimal

Initial value 65535

ipAddressNextHopGateway

Parameter name ipAddressNextHopGateway

Domain BTS

Class 0

203


Presence optional

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

ipRanNodeBAddress

Parameter name ipRanNodeBAddress

Domain BTS

Class 0

Presence optional

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

ipRanSubnetMask

Parameter name ipRanSubnetMask

Domain BTS

Class 0

Presence optional

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

localLanPresence

Parameter name localLanPresence

Domain BTS

Class 0

Presence required

Visibility customer

Range false, true


Initial value N.A.

204


userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

205


32 LocalCellGroup (LocalCellGroup)





Parents:

BTSEquipment - LocalCellGroup

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


r99ResourceId R99Resource

rfCarrierId RfCarrier

Parameters:

rdnId


Domain BTS

Description identifier of the local cell group

Class NA

Presence required

Visibility customer

Unit

Range [0..3]

206


Data Type Decimal

Initial Value

frequencyGroupId

Parameter name frequencyGroupId

Domain BTS

Description This attribute identifies the LocalCellGroup that canbe shared by a PA.

Class 0

Presence required

Visibility customer

Range [0..1]

Data type Decimal

Initial value N.A.

localCellGroupId

Parameter name localCellGroupId

Domain BTS

Description identifier of the local cell group

Class 0

Presence required

Visibility customer

Range [0..3]

Data type Decimal

Initial value N.A.

nonSharedEdchUser

Parameter name nonSharedEdchUser

Domain BTS

Description This parameter is the number of EDCH users thatshould be reserved for this Local Cell Group. Spe-cific check:Sum (all LCG) nonSharedEdchUser <=edchNumberUserCapacityLicensing

Class 3

Presence required

Visibility customer

207


Range [0..255]

Data type Decimal

Initial value 0

nonSharedHsdpaUser

Parameter name nonSharedHsdpaUser

Domain BTS

Description This parameter is the number of HSDPA users thatshould be reserved for this Local Cell Group. Spe-cific check:Sum (all LCG) nonSharedHsdpaUser <=hsdpaNumberUserCapacityLicensing

Class 3

Presence required

Visibility customer

Range [0..255]

Data type Decimal

Initial value 0

nonSharedR99Resource

Parameter name nonSharedR99Resource

Domain BTS

Description This parameter is the number of CE (Channel Ele-ment) for R99 traffic that should be reserved for thisLocal Cell Group. Specific check: Sum (all LCG)nonSharedR99Resource <=r99NumberCECapacityLicensing

Class 0

Presence required

Visibility customer

Range [0..65535]

Data type Decimal

Initial value 0

priority

Parameter name priority

Domain BTS

Description Priority of the frequency

208


Class 0

Presence required

Visibility customer

Range [1..2]

Data type Decimal

Initial value 1

r99ResourceId

Parameter name r99ResourceId

Domain BTS

Class 0

Presence required

Visibility customer

Range R99Resource


Initial value N.A.

rfCarrierId

Parameter name rfCarrierId

Domain BTS

Class 0

Presence required

Visibility customer

Range RfCarrier


Initial value N.A.

userSpecificInfo


Domain OAM


Class NA

Presence optional

Visibility customer

209


Range [0..30]


Initial value N.A.

210


33 NATP (NATP)





Parents:

BTSEquipment - NATP

Child(ren):

NatpTable -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..0]

Data Type Decimal

Initial Value

211


natpGlobalIpAddress

Parameter name natpGlobalIpAddress

Domain BTS

Class 0

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

natpGlobalNetworkMask

Parameter name natpGlobalNetworkMask

Domain BTS

Class 0

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value 255.255.255.0

natpInternalIpAddress

Parameter name natpInternalIpAddress

Domain BTS

Class 3

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

natpInternalNetworkMask

Parameter name natpInternalNetworkMask

Domain BTS

Class 3

212


Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value 255.255.255.0

userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

213


34 NatpTable (NatpTable)





Parents:

BTSEquipment - NATP - NatpTable

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..255]

Data Type Decimal

Initial Value

214


destinationIpAddress

Parameter name destinationIpAddress

Domain BTS

Class 3

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

natpIpInterface

Parameter name natpIpInterface

Domain BTS

Class 3

Presence required

Visibility customer

Range localBTS, rrh11, rrh12, rrh13, rrh14, rrh15, rrh16,rrh21, rrh22, rrh23, rrh24, rrh25, rrh26, rrh31, rrh32,rrh33, rrh34, rrh35, rrh36


Initial value localBTS

sourcePortNumber

Parameter name sourcePortNumber

Domain BTS

Class 3

Presence required

Visibility customer

Range [10000..19999]

Data type Decimal

Initial value N.A.

userSpecificInfo


Domain OAM

215


Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

216


35 NodeBCP (NodeBCP)





Parents:

BTSEquipment - NodeBCP

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


vccId VCC

Parameters:

rdnId


Domain BTS

Description NodeBCP identifier

Class NA

Presence required

Visibility customer

Unit

Range [0..0]

Data Type Decimal

217


Initial Value

availabilityStatus


Domain BTS


Class NA

Presence required

Visibility customer



Initial value N.A.

operationalState


Domain BTS


Class NA

Presence required

Visibility customer




userSpecificInfo


Domain OAM


Class NA

Presence optional

Visibility customer

Range [0..30]


218


Initial value N.A.

vccId


Domain BTS


Class 0

Presence required

Visibility customer

Range VCC


Initial value N.A.

219


36 OMCBConnection (OMCBConnection)





Parents:

BTSEquipment - OMCBConnection

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..7]

Data Type Decimal

Initial Value

220


omcbIpAddress

Parameter name omcbIpAddress

Domain BTS

Description Each entry of the list represents an OMC-B that canmanage the BTS. It is composed of omcbIpAd-dress: IP address of the OMC-B This parameter isused only is DHCP has not been activated on theBTS (I&C parameter). In case the OMC-B addressstored in I&C is not present in the list, the BTS auto-matically adds it in its internal list of OMC-B. Note1:BTS reuses same IP Mask and same BTS In port(same solution as with DHCP) Note2: for CCM re-placement management, the BTS would need toupdate I&C parameter when connecting to a"backup" OMC-B. The Backup OMC-B then be-comes the "current-I&C" OMC-B

Class 3

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

omcbTcpPort

Parameter name omcbTcpPort

Domain BTS

Description omcbTcpPort: TCP port of the OMC-B This para-meter is used only is DHCP has not been activatedon the BTS (I&C parameter).

Class 3

Presence required

Visibility customer

Range [0..65535]

Data type Decimal

Initial value N.A.

userSpecificInfo


Domain OAM

221



Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

222


37 PCM (PCM)





Parents:

BTSEquipment - PCM

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description PCM identifier.

Class NA

Presence required

Visibility customer

Unit

Range [1..16]

Data Type Decimal

Initial Value

223


administrativeState


Domain BTS

Description X731 - OSI State If the PCM supporting OAM link isasked to be locked, the BTS does nothing but re-porting an alarm to OMC-B as soon as possible (ifthis order comes from config file, the alarm wil besent at next connection; if this order comes on-line,BTS will reject it).

Class 3

Presence required

Visibility customer




availabilityStatus


Domain BTS


Class NA

Presence required

Visibility customer



Initial value N.A.

operationalState


Domain BTS


Class NA

Presence required

Visibility customer


224




userSpecificInfo


Domain OAM


Class NA

Presence optional

Visibility customer

Range NA


Initial value N.A.

225


38 PaResource (PaResource)





Parents:

BTSEquipment - PaResource

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..11]

Data Type Decimal

Initial Value

226


maxPowerAmplification

Parameter name maxPowerAmplification

Domain BTS

Description This is the maximum Power of the resource. ValuefullMode means that the hardware resource can beused at its full power.

Class 0

Presence required

Visibility customer

Range fullMode, max30W, max45W, max60W, max85W



userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

227


39 PaResourceRRH (PaResourceRRH)





Parents:

BTSEquipment - RemoteRadioHead - PaResourceRRH

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..1]

Data Type Decimal

Initial Value

228


maxRrhPowerAmplification

Parameter name maxRrhPowerAmplification

Domain BTS

Description This is the maximum Power of the RRH orTRDU.Value fullMode means that the hardware re-source can be use at its full power.

Class 0

Presence required

Visibility customer

Range fullMode, max10W, max20W, max30W, max40W,max60W



userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

229


40 PassiveComponent (PassiveComponent)





Parents:

BTSEquipment - PassiveComponent

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description PasiveComponent identifier.

Class NA

Presence required

Visibility customer

Unit

Range [0..4294967295]

Data Type Decimal

Initial Value

230


administrativeState


Domain BTS

Description X731 - OSI state Some passive component cannotbe locked (the BTS do nothing in that case). Onlythe PAs an DDMs can be locked.

Class 3

Presence required

Visibility customer




availabilityStatus


Domain BTS


Class NA

Presence required

Visibility customer



Initial value N.A.

cabinetNumber


Domain BTS

Description Cabinet number where this board is present

Class NA

Presence required

Visibility customer

Range [0..2147483647]

Data type Decimal

Initial value N.A.

231


hardwareRelease


Domain BTS

Description Indicates the revision level of the equipment 4 AS-CII char: ttnn tt = 2 spaces for a regular product 1space + P for a prototype nn = hardware version

Class NA

Presence required

Visibility customer

Range [0..4]


Initial value N.A.

manufacturerInfo


Domain BTS

Description Manufacturer information if available of the module.

Class NA

Presence optional

Visibility customer

Range [0..64]


Initial value N.A.

manufacturingDate


Domain BTS

Description Note: the parameter is optional for compatibilityreason This parameter is set at Manufacturing dateand is not modified Format wwyy with ww = weeknumber (2 chars) yy = last 2 digits of year number(2 chars) Example: Week 03 year 2000 is coded0300

Class NA

Presence optional

Visibility customer

Range [0..4]

232



Initial value N.A.

moduleApplication


Domain BTS

Description Module application

Class NA

Presence required

Visibility customer



Initial value N.A.

moduleName


Domain BTS

Description Name of the RU in the BAAN database set at man-ufacturing date

Class NA

Presence required

Visibility customer

Range [0..30]


Initial value N.A.

moduleSubType


Domain BTS

Description Module sub type

Class NA

Presence required

Visibility customer

Range [0..15]

Data type Decimal

233


Initial value N.A.

moduleType


Domain BTS

Description Module type

Class NA

Presence required

Visibility customer

Range [0..2147483647]

Data type Decimal

Initial value N.A.

operationalState


Domain BTS

Description X731 - OSI state This attribute is read-only. It rep-resents the board operability. This attribute has twovalues: -

Class NA

Presence required

Visibility customer




pecCode


Domain BTS

Description Hardware board Product Engineering Code.__NTxxNNnnnnnnnn __: two spaces reserved forfuture use where NN = Module family andNnnnnnnn = Edition number

Class NA

Presence required

Visibility customer

234


Range [0..16]


Initial value N.A.

positionInShelf


Domain BTS

Class NA

Presence required

Visibility customer

Range [1..255]

Data type Decimal

Initial value N.A.

serialNumber


Domain BTS

Description Hardware board construction number._____________NNTMxxyyyyyy _____________:13 blank space reserved for future use NNTM: forAlcatel-Lucent manufacturer ID (4 char) xx = Manu-facturing location (2 char) yyyyyy = Serial number(6 char)

Class NA

Presence required

Visibility customer

Range [0..25]


Initial value N.A.

shelfNumber


Domain BTS

Class NA

Presence required

Visibility customer

235


Range [0..10]

Data type Decimal

Initial value N.A.

236


41 PowerSystem (PowerSystem)





Parents:

BTSEquipment - PowerSystem

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description PowerSystem identifier

Class NA

Presence required

Visibility customer

Unit

Range [0..1]

Data Type Decimal

Initial Value

237


238


42 Qaal2Params (Qaal2Params)





Parents:

BTSEquipment - Qaal2Params

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..0]

Data Type Decimal

Initial Value

239


originatingA2ea

Parameter name originatingA2ea

Domain BTS

Description This parameter is the BTS A2EA (AAL Type 2 Ser-vice Endpoint Address). The format of this A2EA isthe NSAP address format (NSAP: Network ServiceAccess Point) Default value: <All bytes set to 0>Note: this parameter is not used by the BTS in UA0

Class 3

Presence required

Visibility customer

Range [40..40]

Data type HexString

Initial value N.A.


resetRetries

Parameter name resetRetries

Domain BTS

Description Number of reset retries before reset procedure isterminated in case of peer not responding. Note:this parameter is not used by the BTS in UA05

Class 3

Presence optional

Visibility customer

Range [1..10]

Data type Decimal

Initial value 3


timerBlo

Parameter name timerBlo

Domain BTS

240


Description This attribute specifies value of the timerBlo definedin Q.2630.1. (timer between qaal2:BLO and qaal2:BLC) Note: this parameter is not used by the BTS inUA05

Class 3

Presence required

Visibility customer

Unit s

Range [2..60]

Data type Decimal

Initial value 5


timerRel

Parameter name timerRel

Domain BTS

Description This attribute specifies value of the timerRel definedin Q.2630.1 (timer between the qaal2:REL andqaal2:RLC) Note: this parameter is not used by theBTS in UA05

Class 3

Presence required

Visibility customer

Unit s

Range [2..60]

Data type Decimal

Initial value 2


timerRes

Parameter name timerRes

Domain BTS

Description This attribute specifies value of the timerResdefined in Q.2630.1. (timer between qaal2:RES andqaal2:RSC) Note: this parameter is not used by the

241


BTS in UA05

Class 3

Presence required

Visibility customer

Unit s

Range [2..60]

Data type Decimal

Initial value 10


timerUbl

Parameter name timerUbl

Domain BTS

Description This attribute specifies value of the timerUbl definedin Q.2630.1. (timer between qaal2:UBL and qaal2:UBC) Note: this parameter is not used by the BTSin UA05

Class 3

Presence required

Visibility customer

Unit s

Range [2..60]

Data type Decimal

Initial value 5


userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

Range [0..30]

242



Initial value N.A.

243


43 R99Resource (R99Resource)





Parents:

BTSEquipment - R99Resource

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..1]

Data Type Decimal

Initial Value

244


minimumR99ResourceRequired

Parameter name minimumR99ResourceRequired

Domain BTS

Class 0

Presence required

Visibility customer

Range [32..768] step:32

Data type Decimal

Initial value 64

userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

245


44 RadiusParameters (RadiusParameters)





Parents:

BTSEquipment - RadiusParameters

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..0]

Data Type Decimal

Initial Value

246


mainRadiusServerIpAddress

Parameter name mainRadiusServerIpAddress

Domain BTS

Class 3

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

mainRadiusServerSharedSecretKey

Parameter name mainRadiusServerSharedSecretKey

Domain BTS

Class 3

Presence required

Visibility customer

Range [1..288]


Initial value N.A.

nasIdentifier

Parameter name nasIdentifier

Domain BTS

Class 3

Presence optional

Visibility customer

Range [0..128]


Initial value N.A.

secondaryRadiusServerIpAddress

Parameter name secondaryRadiusServerIpAddress

Domain BTS

Class 3

247


Presence optional

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

secondaryRadiusServerSharedSecretKey

Parameter name secondaryRadiusServerSharedSecretKey

Domain BTS

Class 3

Presence optional

Visibility customer

Range [1..288]


Initial value N.A.

userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

248


45 RemoteRadioHead (RemoteRadioHead)





Parents:

BTSEquipment - RemoteRadioHead

Child(ren):

ExternalAlarms - PaResourceRRH -

Identifiers:


MaxIn-stances


Links:


siteName Site

Parameters:

rdnId


Domain BTS

Description Possible values - (11) 1st RRH on Optical Output 1- (12) 2nd RRH on Optical Output 1 - (13) 3rd RRHon Optical Output 1 - (21) 1st RRH on Optical Out-put 2 - (22) 2nd RRH on Optical Output 2 - (23) 3rdRRH on Optical Output 2 - (31) 1st RRH on OpticalOutput 3 - (32) 2nd RRH on Optical Output 3 - (33)3rd RRH on Optical Output 3 - (41) 1st RRH on Op-tical Output 4 - (51) 1st RRH on Optical Output 5 -(61) 1st RRH on Optical Output 6

Class NA

249


Presence required

Visibility customer

Unit

Range 11, 12, 13, 14, 15, 16, 21, 22, 23, 24, 25, 26, 31,32, 33, 34, 35, 36, 41, 51, 61

Data Type Enumeration

Initial Value

aliasName


Domain OAM

Class NA

Presence optional

Visibility customer

Range NA


Initial value N.A.

antennaConnectionId

Parameter name antennaConnectionId

Domain BTS

Description This parameter associates this REMOTE RADIOHEAD with an ANTENNA ACCESS object with:RRH::antennaConnectionId == ANTENNA AC-CESS::antennaConnection When the parameter isnot present, the BTS uses the instance of objectREMOTE RADIO HEAD as antennaConnectionIdWhen 2 RRH have the same antennaConnectionId,the BTS will consider that (installation rule)CellGroup with frequencyGroupId = 1 Example:RRH <11>::antennaConnectionId=11 refers to: Sec-tor 11 Main RRH <21>::antennaConnectionId=11refers to: Sector 11 Diversity RRH<31>::antennaConnectionId=21 refers to: Sector 21Main RRH <41>::antennaConnectionId=21 refersto: Sector 21 Diversity RRH<51>::antennaConnectionId=11 refers to: Sector 31Main RRH <61>::antennaConnectionId=11 refersto: Sector 31 Diversity

Class 0

Presence optional

250


Visibility customer

Range antennaConnection_1, antennaConnection_2, an-tennaConnection_3, antennaConnection_4, anten-naConnection_5, antennaConnection_6, anten-naConnection_11, antennaConnection_12, anten-naConnection_13, antennaConnection_14, anten-naConnection_15, antennaConnection_16, anten-naConnection_21, antennaConnection_22, anten-naConnection_23, antennaConnection_24, anten-naConnection_25, antennaConnection_26, anten-naConnection_31, antennaConnection_32, anten-naConnection_33, antennaConnection_34, anten-naConnection_35, antennaConnection_36, anten-naConnection_41, antennaConnection_51, anten-naConnection_61, antennaConnection_101, anten-naConnection_102, antennaConnection_103, an-tennaConnection_1011, antennaConnection_1021,antennaConnection_1031, antennaConnec-tion_1041, antennaConnection_1051, antennaCon-nection_1061


Initial value N.A.

fiberRoundTripDelay

Parameter name fiberRoundTripDelay

Domain BTS

Class NA

Presence optional

Visibility customer

Range [0..2147483647]

Data type Decimal

Initial value N.A.

opticLoss

Parameter name opticLoss

Domain OAM

Class NA

Presence optional

Visibility customer

Range NA


251


Initial value N.A.

repeaterCellList

Parameter name repeaterCellList

Domain BTS

Description When an RRH is in repeater mode, this parameterindicates the list of BTS CELL that the RRH shallrepeat.This parameter is used only whenRRH::rrhMode is set to repeaterMode Note: thisparameter is not used for TRDU

Class 0

Presence optional

Visibility customer

Range BTSCell


Initial value N.A.

rrhGroupId

Parameter name rrhGroupId

Domain BTS

Description This parameter is used to in the solution where anRRH 4FA would be modelized by 2 REMOTE RA-DIO HEAD object. In this solution, the 2 REMOTERADIO HEAD objects with the same rrhGroupIdwould represent the same physical RRH 4FA RRH.Note: this parameter is not used for TRDU

Class 0

Presence optional

Visibility customer

Range [0..5]

Data type Decimal

Initial value N.A.

rrhMode

Parameter name rrhMode

Domain BTS

Description This parameter indicates how the RRH isused.Possible values are:0: sectorMode1: repeater-

252


Mode. Note: this parameter is not used for TRDU.

Class 0

Presence required

Visibility customer

Range sectorMode, repeaterMode


Initial value sectorMode

rrhNumberFrequency

Parameter name rrhNumberFrequency

Domain BTS

Description Number of frequencies that are software-allowed onthis RRH or TRDU. Possible values 0: means nosoftware locking of Number Frequency for this RRHor TRDU, 1: means that RRH or TRDU can onlymanage 1 frequency, 2: means that RRH or TRDUcan manage 2 frequencies, 3: means that this RRHor TRDU can manage 3 frequencies Note: 0 and 2have the same effect. It is to anticipate potential fu-ture RRH that could manage more that 2 frequen-cies If Capacity.rrhCarrierCapacityLicensing is notunlimited, then this parameter becomes useless.

Class 0

Presence required

Visibility customer

Range [0..3]

Data type Decimal

Initial value 1

rxAttenuation

Parameter name rxAttenuation

Domain BTS

Description In case of RRH repeater mode, the capacity andcoverage of RRH and NodeB is limited according tothis parameter.This parameter limits the contribu-tion of the repeated RRH when summing its contri-bution (RX sample) to the Cell. Note: This paramet-er is only used when RRH is in repeater mode. Thisparameter is not used for TRDU

Class 3

253


Presence required

Visibility customer

Unit dB

Range [0.0..10.0] step:0.1

Data type Decimal

Initial value 6.0

siteName


Domain OAM

Description Name of the associated Site

Class NA

Presence optional

Visibility customer

Range Site


Initial value N.A.

supervisedRRHExternalAlarmMask

Parameter name supervisedRRHExternalAlarmMask

Domain BTS

Description Mask (bit map) of the operator external alarms thathave to be supervised The least significant bit (lsb)represents wing this alarm to be reported. Thisparameter is only used for RRH modules (not usedfor TRDU)

Class 3

Presence required

Visibility customer

Range [16..16]

Data type BitString


txAttenuation

Parameter name txAttenuation

Domain BTS

254


Description This parameter controls the transmit path gain ofhTRM when the RRH is in repeater mode.The RRHwill repeat the Cells in repeaterCellList with a TXpower = <NBAP-CellSetupReq>.maxTxPower - tx-Attenuation Note: this parameter is not used forTRDU

Class 3

Presence required

Visibility customer

Unit dB

Range [0.0..30.0] step:0.1

Data type Decimal

Initial value 0.0

userSpecificInfo


Domain OAM

Description Information field reserved to the user. No specifictreatment on this field is performed by the system.

Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

255


46 RfCarrier (RfCarrier)





Parents:

BTSEquipment - RfCarrier

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..3]

Data Type Decimal

Initial Value

256


dlFrequencyNumber

Parameter name dlFrequencyNumber

Domain BTS

Class 0

Presence required

Visibility customer

Range [0..16383]

Data type Decimal

Initial value N.A.

frequencyBand

Parameter name frequencyBand

Domain BTS

Class 0

Presence required

Visibility customer

Range umtsBand, umts1900Band, umts1800Band,umts2100-1700Band, umts850Band, umts800Band,umts2600Band, umts900Band, umts1700Band


Initial value N.A.

hspaHardwareAllocation

Parameter name hspaHardwareAllocation

Domain BTS

Class 3

Presence required

Visibility customer

Range icemOnly, xcemOnly, xcemPreference, icemPrefer-ence


Initial value N.A.

ulFrequencyNumber

Parameter name ulFrequencyNumber

257


Domain BTS

Class 0

Presence required

Visibility customer

Range [0..16383]

Data type Decimal

Initial value N.A.

userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

258


47 RouteCes (RouteCes)





Parents:

BTSEquipment - RouteCes

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


pcmId PCM

vccId VCC

Parameters:

rdnId


Domain BTS

Description RouteCes identifier

Class NA

Presence required

Visibility customer

Unit

Range [0..15]

259


Data Type Decimal

Initial Value

availabilityStatus


Domain BTS


Class NA

Presence required

Visibility customer



Initial value N.A.


operationalState


Domain BTS


Class NA

Presence required

Visibility customer





partialFill

Parameter name partialFill

Domain BTS

Description If partial fill is used, this parameter gives the num-ber of user octet per AAL1 cell. Setting this para-

260


meter to 0 disables partial cell fill, and causes allcells to be completely filled before they are sent. (0)NO_PARTIAL_FILL Note1: a significant source ofdelay is the delaynd therefore required bandwidth)of the AAL1 VCC. Note2: This parameter has thesame meaning as the one defined in ATM Forum.Value 47 defined in ATM forum and correspondingto unstructured mode is not supported. Defaultvalue = 0 (NO_PARTIAL_FILL)

Class 0

Presence required

Visibility customer

Range [0..47]

Data type Decimal

Initial value 0


pcmId

Parameter name pcmId

Domain BTS

Description Represents the Identifier of the outgoing PCM toreach a remote BTS.

Class 0

Presence required

Visibility customer

Range PCM


Initial value N.A.


pcmTimeSlotMask

Parameter name pcmTimeSlotMask

Domain BTS

Description Represents a bit mask where each bit stands for aPCM TimeSlot number. A bit is set to 1 if the cor-responding TS is part of the CES Route, is set to 0

261


in other cases (TS not part of the group or unavail-able). The least significant bit (lsb) represents t(msb) represents

Class 0

Presence required

Visibility customer

Range [32..32]

Data type BitString

Initial value N.A.


rxCellDelayVariationTolerance

Parameter name rxCellDelayVariationTolerance

Domain BTS

Description Cell Delay variation Tolerance for the VCCid

Class 0

Presence required

Visibility customer

Unit micro-s

Range [100..31000] step:100

Data type Decimal

Initial value 2000


userSpecificInfo


Domain OAM


Class NA

Presence optional

Visibility customer

Range [0..30]

262



Initial value N.A.

vccId


Domain BTS


Class 0

Presence required

Visibility customer

Range VCC


Initial value N.A.


263


48 RtObsSession (RtObsSession)





Parents:

BTSEquipment - RtObsSession

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description RtObsSession identifier

Class NA

Presence required

Visibility customer

Unit

Range [0..0]

Data Type Decimal

Initial Value

264


familyState

Parameter name familyState

Domain BTS

Description familyState[I] indicates whether the family of coun-ters whose id is equal to I, is requested by OMC(value = true) or not (value = false) . When the ob-ject is created familyState[I] must be false for everyI. For every index I not matching a defined Counter-Family, familyState[I] must be set to false (i.e. indic-ating the activation of a non-existing family is inval-id).

Class 3

Presence required

Visibility customer

Range CounterFamily


Initial value N.A.


granularityPeriod

Parameter name granularityPeriod

Domain BTS

Description This defines the period in minutes with which re-quested families of counter (as indicated by famil-iesState) must be returned to OMC. This parametercan be changed only when no family is currently re-quested (i.e. familyState[I] = false for every I as re-corded in BTS MIB)

Class 3

Presence required

Visibility customer

Unit min

Range [1..5]

Data type Decimal

Initial value 5


265


userSpecificInfo


Domain OAM


Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

266


49 SaalUniParams (SaalUniParams)





Parents:

BTSEquipment - SaalUniParams

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..0]

Data Type Decimal

Initial Value

267


timerCC

Parameter name timerCC

Domain BTS

Description Timer as defined in ITU Q2110 In the connectioncontrol phase, during establishment and release ofa connection and during resynchronization or recov-ery, transmission of PDUs is protected by theTimerCC. It determines the time between transmis-sion of BGN (Begin PDU), END (End PDU), ER(Error Recovery), or RS (Resynchronization) PDUas long as an acknowledgement to these PDUs hasnot been received.

Class 3

Presence required

Visibility customer

Unit s

Range [1..5]

Data type Decimal

Initial value 2

timerIdle

Parameter name timerIdle

Domain BTS

Description Timer as defined in ITU Q2110 In idle phase, whenupon receipt of a STAT (Solicited status) PDU,timerIdle is started. At the expiry of timerIdle, thetransient phase is entered again.

Class 3

Presence required

Visibility customer

Unit s

Range [1..60]

Data type Decimal

Initial value 2

timerKeepAlive

Parameter name timerKeepAlive

Domain BTS

268


Description Timer as defined in ITU Q2110 In the transientphase, When timerPoll expires (and the POLL PDUhas been sent) and there are no outstanding ac-knowledgements or new data pending receipt ofcredit, the transient phase is entered and the timer-KeepAlive is started. The transient phase revertsback to the active if at expiry of timerKeepAlive,new data is pending receipt of credit.

Class 3

Presence required

Visibility customer

Unit s

Range [1..60]

Data type Decimal

Initial value 2

timerNoResponse

Parameter name timerNoResponse

Domain BTS

Description Timer as defined in ITU Q2110 In active phase, inorder to detect a broken connection, a TimerNoRe-sponse is running parallel to timerPoll. TimerNoRe-sponse indicates the maximum time interval duringwhich at least one STAT PDU needs to be re-ceived. Failing this, the SSCOP connection is abor-ted.

Class 3

Presence required

Visibility customer

Unit s

Range [2..60]

Data type Decimal

Initial value 30

timerPoll

Parameter name timerPoll

Domain BTS

Description Timer as defined in ITU Q2110 In active phase, atimerPoll is running to assure that the peer receiveris polled often enough (via POLL PDUs) to return its

269


status (STAT PDU); this in turn is needed for ad-vancing the credit window and efficient recoveryfrom transmission errors.

Class 3

Presence required

Visibility customer

Unit s

Range [1..60]

Data type Decimal

Initial value 1

userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

270


50 SiteLan (SiteLan)





Parents:

BTSEquipment - SiteLan

Child(ren):

DeviceTable -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description SiteLan identifier

Class NA

Presence required

Visibility customer

Unit

Range [0..0]

Data Type Decimal

Initial Value

271


subNetworkAddress

Parameter name subNetworkAddress

Domain BTS

Description Definition of the subNetwork connected beyond theBTS (IP address notation)

Class 3

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

subNetworkMaskOfSiteLan

Parameter name subNetworkMaskOfSiteLan

Domain BTS

Description Definition of the sub network mask connected bey-ond the BTS (IP address notation) IETF RFC 922 &1878 The network mask strips the network ID fromthe IP address, leaving only the host ID. The net-work mask is what performs all the local magic ofdividing an IP network into subnetworks. The net-work mask for an un-sub-networked IP networknumber is simply a dotted quad which has all the'network bits' of the network number set to '1' andall the host bits set to '0'. So, for the three classesof IP networks, the standard network masks are:- rknumber into two subnetworks, we would borrow onehost bit by setting the appropriate bit in the networkmask of the first (normal) host bit to '1'. For a CClass address, this would result in a netmask of11111111.11111111.11111111.10000000 or255.255.255.128 For C Class network number of192.168.1.0, these are some of the sub-networkingoptions you have:______________________________________________________________________ No of No ofsubnets Hosts/net netmask 2 126 255.255.255.128(11111111.11111111.11111111.10000000) 4 62255.255.255.192(11111111.11111111.11111111.11000000) 8 30255.255.255.224(11111111.11111111.11111111.11100000) 16 14255.255.255.240(11111111.11111111.11111111.11110000) 32 6

272


255.255.255.248(11111111.11111111.11111111.11111000) 64 2255.255.255.252(11111111.11111111.11111111.11111100)______________________________________________________________________ The addressof an interface (such as an Ethernet card or PPP in-terface on a host, router, print server etc) can haveany value in the host bits except all zero or all 1

Class 3

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

userSpecificInfo


Domain OAM


Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

273


51 UserAlarm (UserAlarm)





Parents:

BTSEquipment - UserAlarms - UserAlarm

BTSEquipment - ExtensionCabinet - UserAlarms - UserAlarm

Child(ren):

-

Identifiers:


MaxIn-stances

equipment-Number


Links:


Parameters:

equipmentNumber

Parameter name equipmentNumber

Domain OAM

Description The equipment number of the external alarm

Class NA

Presence required

Visibility customer

Unit

Range [1..3]

274


Data Type Decimal

Initial Value

alarmCode

Parameter name alarmCode

Domain OAM

Class NA

Presence optional


Range [1..5]

Data type Bcd

Initial value N.A.

alarmMessage

Parameter name alarmMessage

Domain OAM

Description The message to be display for this external alarm

Class NA

Presence required

Visibility customer

Range [0..256]


Initial value N.A.

severity

Parameter name severity

Domain OAM

Class NA

Presence optional

Visibility customer

Range minor, warning, major, critical


Initial value N.A.

275


userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

Range NA


Initial value N.A.

276


52 UserAlarms (UserAlarms)





Parents:

BTSEquipment - UserAlarms

BTSEquipment - ExtensionCabinet - UserAlarms

Child(ren):

UserAlarm -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain OAM

Description

Class NA

Presence required

Visibility customer

Unit

Range [0..0]

Data Type Decimal

277


Initial Value

userSpecificInfo


Domain OAM

Class NA

Presence optional

Visibility customer

Range NA


Initial value N.A.

278


53 VCC (VCC)





Parents:

BTSEquipment - VCC

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain BTS

Description VCC Identifier, referenced as VccId in all others ob-jects

Class NA

Presence required

Visibility customer

Unit

Range [0..55]

Data Type Decimal

Initial Value

279


administrativeState


Domain BTS

Description X731 - OSI state This attribute is read-write. It rep-resents board administration, which operates inde-pendently of the operability and usage of managedobjects. This attribute has three values: s function

Class 0

Presence required





availabilityStatus


Domain BTS

Description OSI - X731

Class NA

Presence required

Visibility customer



Initial value N.A.

cdvTolerancePCR

Parameter name cdvTolerancePCR

Domain BTS


Class 0

Presence required

Visibility customer

280


Unit micro-s

Range [0..2147483647]

Data type Decimal

Initial value 0

Rec val comments The smaller the priority of the VC, the higher theCDVTolerancePCR. Therefore, here is the CDVTol-erancePCR recommended: For atmProfile P0: CD-VTolerancePCR = TBD For atmProfile P1: CDVTol-erancePCR = TBD For atmProfile P2: CDVToleran-cePCR = TBD

cdvToleranceSCR

Parameter name cdvToleranceSCR

Domain BTS


Class 0

Presence required

Visibility customer

Unit micro-s

Range [0..2147483647]

Data type Decimal

Initial value 0

Rec val comments The smaller the priority of the VC, the higher theCDVToleranceSCR. Therefore, here is the CDVTol-eranceSCR recommended: For atmProfile P0: CD-VToleranceSCR = CDVTolerancePCR = TBD ForatmProfile P1: CDVToleranceSCR = CDVToleran-cePCR = TBD For atmProfile P2: CDVToler-anceSCR = CDVTolerancePCR = TBD

externalPortId

Parameter name externalPortId

Domain BTS

Description Represents

281


Class 0

Presence required

Visibility customer

Range [0..32]

Data type Decimal

Initial value N.A.

holdingPriority

Parameter name holdingPriority

Domain BTS

Description The holdingPriority is used only for VCC of an IMAgroup when the parameter imaDefenseDelay ispresent (IMA defense is activated). This parameterindicates the priority order by which this externalATM VCC is: - setup at startup - discarded at tvated, the BTS will discard 2 AAL2 VCC with lowestholdingPriority Note2: in case of online modificationof this parameter, the modification it will be taken in-to account only on next PCM failure/recovery.

Class 3

Presence required

Visibility customer

Range [0..16]

Data type Decimal

Initial value N.A.

Def value comments 0 for AAL5 VCC 0 for HSDPA AAL2 VCC 0 for CESAAL1 VCC 1, 2, 3, 4, 5, 6, 7, 8 for DS AAL2 VCC (1for 1st DS AAL2 VCC; 2 for 2nd DS AAL2 VCC ...)1, 2, 3, 4, 5, 6, 7 for NDS AAL2 VCC

interfaceType

Parameter name interfaceType

Domain BTS

Description Type of physical bearer. PCM is the only supportedin V2 IMA is supported in V3

Class 0

Presence required

Visibility customer

Range interfaceTypePcm, interfaceTypeIma

282



Initial value interfaceTypePcm

maxBurstSize

Parameter name maxBurstSize

Domain BTS


Class 3

Presence required

Visibility customer


Range [0..2147483647]

Data type Decimal

Initial value N.A.

Rec val comments The maxBurstSize is used only for rtVBR andnrtVBR Service category. Therefore, here is themaxBurstSize recommended: For atmProfile P0:maxBurstSize = NA For atmProfile P1: maxBurst-Size = TBD For atmProfile P2: maxBurstSize = TBD

operationalState


Domain BTS


Class NA

Presence required

Visibility customer




peakCellRate

Parameter name peakCellRate

Domain BTS

283


Description ATM Forum: af-tm-0056.000 April 1996 "TrafficManagement Specification" It is included in TrafficDescriptor parameters. It is used to define the max-imum Cell rate of the VC.

Class 3

Presence required

Visibility customer

Unit cells/sec

Range [0..2147483647]

Data type Decimal

Initial value N.A.

Rec val comments The PCR depends on the flow considered: For atm-Profile P0: PCR = TBD For atmProfile P1: PCR=TBD For atmProfile P2: PCR= TBD

serviceCategory

Parameter name serviceCategory

Domain BTS

Description ATM Forum: af-tm-0056.000 April 1996 "TrafficManagement Specification" It defines the ATM Ser-vice Category of the ATM Profile considered.

Class 0

Presence required

Visibility customer

Range CBR, VBRrt, VBRnrt, UBR, UBRPlus, VBRnrt0,VBRnrt2, VBRnrt3, UBR0, UBR1, UBR3,UBRPlus0, UBRPlus1, UBRPlus3


Initial value N.A.

sustainableCellRate

Parameter name sustainableCellRate

Domain BTS

Description ATM Forum: af-tm-0056.000 April 1996 "TrafficManagement Specification" It is included in TrafficDescriptor parameters for Iub interface. It is the ratethat a burst ON-OFF traffic source can send. Theworst case is a source sending Max Burst Size cellsat a Peak Cell Rate.

284


Class 3

Presence required

Visibility customer

Unit cells/sec

Range [0..2147483647]

Data type Decimal

Initial value N.A.

Rec val comments The SCR depends on the atmProfile considered:For atmProfile P0: SCR = TBD For atmProfile P1:SCR= TBD For atmProfile P2: SCR= TBD

userSpecificInfo


Domain OAM


Class NA

Presence optional

Visibility customer

Range [0..30]


Initial value N.A.

vc

Parameter name vc

Domain BTS

Description VC identifier

Class 0

Presence required

Visibility customer

Range [32..255]

Data type Decimal

Initial value N.A.

vp

Parameter name vp

285


Domain BTS

Description vp Identifier

Class 0

Presence required

Visibility customer

Range [0..7]

Data type Decimal

Initial value N.A.

286


54 Index of Customer Parameters

•Standard

—AAL2Bearer

– pathId

– userSpecificInfo

– vccId

—AlcapBearer


– vccId

—AntennaAccess

– antennaConnection

– antennaSystemRef

– cellPlanningId

– externalAttenuationDivDl

– externalAttenuationDivUl

– externalAttenuationMainDl

– externalAttenuationMainUl

– externalDlDelay

– externalUlDelay

– retPresence

– rxCabling

– tmaAccessType


—BTSCell

– antennaConnectionList

– cellPlanningId

– cellProfile

– cellSize

– dynamicPersistenceLevel

– edchResourceActivation

– hsdpaResourceActivation

287


– hsxpaResourceId

– localCellGroupId

– maximumPowerAmplification

– paRatio

– paResourceId

– pmmActivation

– rssiHighAlarmThreshold

– rssiUnbalancedMainDivThreshold

– rtwpMargin

– rtwpMaxCellLoadCacActivation

– rtwpMaxCellLoadNonEdch

– rtwpReference

– rtwpTimeDetection

– transportFiberDelay


—BTSHsdpaResource

– hsdpaMaxThroughputHbbu


—CCP

– ccpId


– vccId

—Capacity

– edchNumberUserCapacityLicensing

– edchThroughputCapacityLicensing

– hsdpaNumberUserCapacityLicensing

– hsdpaThroughputCapacityLicensing

– paPowerCapacityLicensing

– r99NumberCECapacityLicensing

– rrhCarrierCapacityLicensing

– rrhPowerCapacityLicensing


288


– xtrmCarrierCapacityLicensing

—CounterFamily


—DeviceTable

– deviceIpAddress

– deviceType

– dnsServer

– managerAddress

– managerFqdn

– managerSpec


—EdchConf

– commonERGCHPowerOffset

– deltaDownServingCellNoHO

– duplexOffsetForEagchPowerControl

– eDchResourceId

– eagchPathLossValue

– eagchPower

– eagchPowerControlMode

– eagchPowerControlModeXcem

– eagchPowerOffset

– eagchPowerValue

– edchInactivityTimerXcem

– edchInitialTBIndex10msTTI

– edchInitialTBIndex2msTTI

– edchNumCommonRgPerCode

– edchSofterHoLimit

– edchSpiRelativeWeight

– ehichErrorProbability

– ehichPowerControlMode

– ehichPowerSignature

– ergchPowerControlMode

289


– ergchPowerSignature

– harqType

– maxEdchCommonChannelPower

– maxPowerCorrection

– minPowerCorrection

– nonServingEHICHPowerOffset

– pMaxDlEDCH

– pMinDlEDCH

– powerOffsetERGCHServingNoSHO

– powerOffsetERGCHServingSHO

– rotMarginPrediction

– rotOrthogonalityEstimation

– rotPredictionCorrection

– ttiType


—EdchServiceParameterSet

– schedulingPriorityLevel

– serviceBFactor

– serviceKFactor

– serviceMaxRate

– serviceMinRate


—ExtensionCabinet

– aliasName

– siteName

– supervisedExternalAlarmMask

– supervisedUserAlarmMask


—ExternalAlarm

– alarmCode

– alarmMessage

– severity

290



—ExternalAlarms


—HsXpaResource

– capacity

– edchMaxThroughputXcem

– hsdpaMaxThroughputXcem

– hsxpaGuaranteeCapacity


—HsdpaConf

– dchPowerMargin

– edchEstimatedMaxTotalDlPower

– harqNbMaxRetransmissions

– harqNbMaxRetransmissionsXcem

– harqTargNumTransmissionsXcem

– harqType

– harqTypeXcem

– hsdpaAdjustBlerToChannelVariation

– hsdpaAmpUsage

– hsdpaBlerObservationWindow

– hsdpaBlerStepSize

– hsdpaBlerTargetLowerLimit

– hsdpaBlerTargetLowerLimitXcem

– hsdpaBlerTargetMediumLimit

– hsdpaBlerTargetUpperLimit

– hsdpaBlerTargetUpperLimitXcem

– hsdpaCqiBlerAdjustmentAlgo

– hsdpaCqiBlerAdjustmentAlgorithmXcem

– hsdpaFlexibleModulationVsCodeActivation

– hsdpaFullPowerUsage

– hsdpaGbrIncreaseFactorForMobility

– hsdpaGbrNbNeededTtiForgettingFactor

291


– hsdpaGbrNbUePerTtiForgettingFactor

– hsdpaGbrTbSizeMonitoringForgettingFactorPerSpi

– hsdpaMinAmpUsage

– hsdpaResourceId

– hsdpaSchedulerAlgorithm

– hsdpaSchedulerAlgorithmXcem

– hsdpaSchedulerWeightingFactor

– hsdpaSchedulerWeightingFactorXcem

– hsdpaSpiRelativeWeight

– hsdpaUeCategoryThroughputWeighting

– hsdpaUeCategoryThroughputWeightingXcem

– hsdschInterval

– hsscchPcOffset

– hsscchSnr

– maxRateGrowth

– txCarrierPowerNotHsxpaComputation


—HsdpaMaxUeCategoryCapabilityActivation

– ueCategory1

– ueCategory10

– ueCategory11

– ueCategory12

– ueCategory2

– ueCategory3

– ueCategory4

– ueCategory5

– ueCategory6

– ueCategory7

– ueCategory8

– ueCategory9


—HsdpaUeCategoryTransportBlockOptimisation

– ueCategory1

292


– ueCategory10

– ueCategory11

– ueCategory12

– ueCategory2

– ueCategory3

– ueCategory4

– ueCategory5

– ueCategory6

– ueCategory7

– ueCategory8

– ueCategory9


—HsdschServiceParameterSet

– serviceBFactor

– serviceFilterFactor

– serviceHighRate

– serviceKFactor

– serviceLowRate

– serviceMaxDelay

– serviceMaxRate

– serviceMinRate


—ImaGroup

– imaDefenseDelay

– imaPcmList

– imaWeightingFactor

– signallingReservedBandwidth


—IpInterface

– ipInterfaceType


—IpRan

293


– dhcpUsed

– ethernetVLANId

– heartBeatUDPPortNumber

– ipAddressNextHopGateway

– ipRanNodeBAddress

– ipRanSubnetMask

– localLanPresence


—LocalCellGroup

– frequencyGroupId

– localCellGroupId

– nonSharedEdchUser

– nonSharedHsdpaUser

– nonSharedR99Resource

– priority

– r99ResourceId

– rfCarrierId


—NATP

– natpGlobalIpAddress

– natpGlobalNetworkMask

– natpInternalIpAddress

– natpInternalNetworkMask


—NatpTable

– destinationIpAddress

– natpIpInterface

– sourcePortNumber


—NodeBCP


– vccId

294


—OMCBConnection

– omcbIpAddress

– omcbTcpPort


—PCM


—PaResource

– maxPowerAmplification


—PaResourceRRH

– maxRrhPowerAmplification


—Qaal2Params

– originatingA2ea

– resetRetries

– timerBlo

– timerRel

– timerRes

– timerUbl


—R99Resource

– minimumR99ResourceRequired


—RadiusParameters

– mainRadiusServerIpAddress

– mainRadiusServerSharedSecretKey

– nasIdentifier

– secondaryRadiusServerIpAddress

– secondaryRadiusServerSharedSecretKey


295


—RemoteRadioHead

– aliasName

– antennaConnectionId

– opticLoss

– repeaterCellList

– rrhGroupId

– rrhMode

– rrhNumberFrequency

– rxAttenuation

– siteName

– supervisedRRHExternalAlarmMask

– txAttenuation


—RfCarrier

– dlFrequencyNumber

– frequencyBand

– hspaHardwareAllocation

– ulFrequencyNumber


—RouteCes

– partialFill

– pcmId

– pcmTimeSlotMask

– rxCellDelayVariationTolerance


– vccId

—RtObsSession

– familyState

– granularityPeriod


—SaalUniParams

296


– timerCC

– timerIdle

– timerKeepAlive

– timerNoResponse

– timerPoll


—SiteLan

– subNetworkAddress

– subNetworkMaskOfSiteLan


—UserAlarm

– alarmMessage

– severity


—UserAlarms


—VCC

– cdvTolerancePCR

– cdvToleranceSCR

– externalPortId

– holdingPriority

– interfaceType

– maxBurstSize

– peakCellRate

– serviceCategory

– sustainableCellRate


– vc

– vp

•Inventory

—Board

297


– manufacturerInfo

– manufacturingDate

—InventoryComponent



—PassiveComponent



•States and Status

—AAL2Bearer

– availabilityStatus

– localBlockingState

– operationalState

– remoteBlockingState

—AlcapBearer



—AntennaAccess



—BTSEquipmentMIB

– mibState

—Board

– administrativeState



– standbyStatus

—CCP


298



—IpInterface




—NodeBCP



—PCM




—PassiveComponent




—RouteCes



—VCC



•Dynamic Data

—BTSCell

– equipmentMapping

—Capacity

– getLicensingcapability

—ExtensionCabinet

– fiberRoundTripDelay

299


—RemoteRadioHead

– fiberRoundTripDelay

•Installation and Commisioning

300


55 Index of Manufacturer Parameters

•Standard

—BTSCell

—BTSEquipment

– OAMProtocol

– ftpPassword

– perfServerId

– provisionedSystemRelease

– telnetPassword

– tilPassword

—CounterFamily

– counterList

—UserAlarm

– alarmCode

—UserAlarm

– alarmCode

—VCC

•Inventory

•States and Status

—BTSEquipment

—BTSEquipmentMIB

—VCC


•Dynamic Data

—BTSCell

—BTSEquipment

301


•Installation and Commisioning

—BTSEquipment

– alphaParameter

– betaParameter

– cpriManagement

– dhcpServerPresence

– e1PcmFrame

– gammaParameter

– gpsSyncSourceNumber

– imaFrameLength

– imaUsed

– imaVersion

– ipAddressBts

– ipAddressOmcB

– maskOfPcmTsUsed

– maskOfPcmUsed

– maxDifferentialDelay

– minNbOfActiveLinksInGroup

– omcBPort

– pcmChannel16Mode

– pcmE1Adaptation

– pcmE1CrcThreshold

– pcmLbo

– pcmProtectionModule

– pcmReceiveSensitivity

– pcmT1Adaptation

– pcmT1CrcThreshold

– pcmType

– receiveCrc

– rxCdvTPcrVcOmcB

– rxCdvTScrVcOmcB

– rxMbsVcOmcB

– rxPcrVcOmcB

302


– rxScrVcOmcB

– serviceCategoryVcOmcB

– subNetworkMask

– syncDelay

– syncFallbackOnPcm

– syncMode

– t1PcmCoding

– t1PcmFrame

– testPatternProcedure

– txCdvTPcrVcOmcB

– txCdvTScrVcOmcB

– txMbsVcOmcB

– txPcrVcOmcB

– txScrVcOmcB

– vcOmcB

– vpOmcB

303


304


Wireless Service Provider SolutionsW-CDMAAlcatel-Lucent 9300 W-CDMA Product Family - Parameter Reference Guide - NodeB Parameters

Copyright © 2001-2008 Alcatel-Lucent, All Rights Reserved

ALCATEL-LUCENT CONFIDENTIAL

UNCONTROLLED COPY: The master of this document is stored on an electronic database and is "write protected"; it may be alteredonly by authorized persons. While copies may be printed, it is not recommended. Viewing of the master electronically ensures accessto the current issue. Any hardcopies taken must be regarded as uncontrolled copies.

ALCATEL-LUCENT CONFIDENTIAL: The information contained in this document is the property of Alcatel-Lucent. Except asexpressly authorized in writing by Alcatel-Lucent, the holder shall keep all information contained herein confidential, shall disclose theinformation only to its employees with a need to know, and shall protect the information from disclosure and dissemination to thirdparties. Except as expressly authorized in writing by Alcatel-Lucent, the holder is granted no rights to use the information containedherein. If you have received this document in error, please notify the sender and destroy it immediately.

Alcatel-Lucent, Alcatel, Lucent Technologies and their respective logos are trademarks and service marks of Alcatel-Lucent, Alcateland Lucent Technologies.

All other trademarks are the property of their owners.

Document number: NN-20500-027Document issue: 09.05Document status: PreliminaryProduct Release: OAM06.0Date: September 2008

Date post:	22-Oct-2015
Category:	Documents
Upload:	rookie2
View:	199 times
Download:	13 times

Parameter Reference Guide - NodeB

Documents