+ All Categories
Home > Documents > Parker Drilling Rig 269L 2,800 hp AC Variable Frequency Drive … · 2018-02-07 · choke manifold...

Parker Drilling Rig 269L 2,800 hp AC Variable Frequency Drive … · 2018-02-07 · choke manifold...

Date post: 07-Jul-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
2
Parker Drilling Rig 269L 2,800 hp AC Variable Frequency Drive Land Drilling Rig Year Built: 2008 Rated Drilling Depth 5 in. Drill Pipe: 21,000 ft (6,400 m) 4-1/2 in. Drill Pipe: 24,700 ft (7,529 m) Mast Make, Type: Loadmaster, Telescoping Height: 152 ft (46 m) Max. Hookload: 1,000,000 lbs Racking Capacity: 5-1/2 in. drill pipe, 90 ft stand – 21,000 ft (6,400 m) Drawworks Make: Varco ADS-10D AC Maximum Input: 2,800 hp (2,089 kW) Continuous Input: 2,300 hp (1,715 kW) Input Power: Two (2) 1,150 hp GEB-22 AC motors Drilling Line: 1-1/2 in. (38 mm) Traveling Equipment Traveling Block: Dreco 660TB-500 Max. Load: 1,000,000 lbs Substructure Make, Type: Loadmaster, Hydraulically Raised Rig Floor Height: 32 ft (9.75 m) Clear Working Height: 28 ft (8.5 m) Setback Load: 600,000 lbs Rotary Equipment Top Drive: TDS-11SA Max. Load: 1,000,000 lbs Input Power: Two (2) AC drilling motors, each rated 400 hp (597 kW) Rotary Table: NOV D-375 37-1/2 in. (952 mm) Input Power: 1,150 hp (858 kW) Static Load Rating: 1,300,000 lbs BOP System Annular Preventer: Hydril 21-¼ in. 2M Diverter, 13-5/8 in. 5M annular Ram Preventers: Cameron 13-5/8 in. 10M double ram Cameron 13-5/8 in. 10M single ram Gensets Engines: Five (5) Caterpillar 3512-B 1,476 hp (1,100 kW) @ 1,200 rpm each Generators: Five (5) Kato 6P6-3300 generators; 1,365 kW (1,950 kVA) each Power Distribution Gen. Control: National Oilwell Varco - Amphion Function Control System with ABB Variable AC Drive VFD: Nine (9) ABB Drives, Inverters Two (2) 3200 NOV Converters MCC: (8) 600 VAC (14) 480 VAC Mud Pumps Pumps: Three (3) NOV 12-P-160 pumps; each rated 1,600 hp (1,193 kW) Input Power: Each pump driven by two (2) 1,150 hp GEB-22 AC motors Mud Handling/Solids Control Total Mud Volume: 2,000 bbls (318 m 3 ) Shale Shakers: Three (3) Derrick FLC-503, 3-panel High-”G” shakers; 560 gpm each One (1) Derrick High-”G” Dryer Degasser: Swaco Horizontal D-Gasser; 800 gpm 5 Greenway Plaza, Suite 100 Houston, Texas 77046 – U.S.A. http://www.parkerdrilling.com Tel: +1.281.406.2000 Fax +1.281.406.2001 Note: Equipment subject to client-specific requirements. No part of this document may be reproduced or transmitted without prior consent of Parker Drilling. Rev 02/17
Transcript
Page 1: Parker Drilling Rig 269L 2,800 hp AC Variable Frequency Drive … · 2018-02-07 · choke manifold big bag hopper 10.58 ft [3.23 m] 155.63 ft [47.44 m] genset assembled mast lower

Parker Drilling Rig 269L 2,800 hp AC Variable Frequency Drive Land Drilling Rig

Year Built: 2008 Rated Drilling Depth 5 in. Drill Pipe: 21,000 ft (6,400 m) 4-1/2 in. Drill Pipe: 24,700 ft (7,529 m) Mast Make, Type: Loadmaster, Telescoping Height: 152 ft (46 m) Max. Hookload: 1,000,000 lbs Racking Capacity: 5-1/2 in. drill pipe, 90 ft stand – 21,000 ft (6,400 m) Drawworks Make: Varco ADS-10D AC Maximum Input: 2,800 hp (2,089 kW) Continuous Input: 2,300 hp (1,715 kW) Input Power: Two (2) 1,150 hp GEB-22 AC motors Drilling Line: 1-1/2 in. (38 mm) Traveling Equipment Traveling Block: Dreco 660TB-500 Max. Load: 1,000,000 lbs Substructure Make, Type: Loadmaster, Hydraulically Raised Rig Floor Height: 32 ft (9.75 m) Clear Working Height: 28 ft (8.5 m) Setback Load: 600,000 lbs Rotary Equipment Top Drive: TDS-11SA Max. Load: 1,000,000 lbs Input Power: Two (2) AC drilling motors, each rated 400 hp (597 kW) Rotary Table: NOV D-375 37-1/2 in. (952 mm) Input Power: 1,150 hp (858 kW) Static Load Rating: 1,300,000 lbs BOP System Annular Preventer: Hydril 21-¼ in. 2M Diverter, 13-5/8 in. 5M annular Ram Preventers: Cameron 13-5/8 in. 10M double ram Cameron 13-5/8 in. 10M single ram

Gensets Engines: Five (5) Caterpillar 3512-B 1,476 hp (1,100 kW) @ 1,200 rpm each Generators: Five (5) Kato 6P6-3300 generators; 1,365 kW (1,950 kVA) each Power Distribution Gen. Control: National Oilwell Varco - Amphion Function Control System with ABB Variable AC Drive VFD: Nine (9) ABB Drives, Inverters Two (2) 3200 NOV Converters MCC: (8) 600 VAC (14) 480 VAC Mud Pumps Pumps: Three (3) NOV 12-P-160 pumps; each rated 1,600 hp (1,193 kW) Input Power: Each pump driven by two (2) 1,150 hp GEB-22 AC motors Mud Handling/Solids Control Total Mud Volume: 2,000 bbls (318 m3) Shale Shakers: Three (3) Derrick FLC-503, 3-panel High-”G” shakers; 560 gpm each One (1) Derrick High-”G” Dryer Degasser: Swaco Horizontal D-Gasser; 800 gpm

5 Greenway Plaza, Suite 100 Houston, Texas 77046 – U.S.A.

http://www.parkerdrilling.com Tel: +1.281.406.2000 Fax +1.281.406.2001

Note: Equipment subject to client-specific requirements. No part of this document may be reproduced or transmitted without prior consent of Parker Drilling. Rev 02/17

Page 2: Parker Drilling Rig 269L 2,800 hp AC Variable Frequency Drive … · 2018-02-07 · choke manifold big bag hopper 10.58 ft [3.23 m] 155.63 ft [47.44 m] genset assembled mast lower

5 Greenway Plaza, Suite 100 Houston, Texas 77046 – U.S.A.

http://www.parkerdrilling.com Tel: +1.281.406.2000 Fax +1.281.406.2001

Parker Drilling Company Rig 269L 2,800 hp Land Drilling Rig

Rig Plot Plan (mast fully telescoped)

Design Features (All main components conform to API specifications)

Note: Equipment subject to client-specific requirements. No part of this document may be reproduced or transmitted without prior consent of Parker Drilling. Rev 02/17

A fully automated drilling system featuring fuel-efficient AC technology and variable frequency drive, substantially automating the drilling process and enhancing power delivery.

A hydraulic cylinder system used to raise both the mast and the substructure to the vertical position, without the use of the engines and drawworks, decreasing rig-up cost, time, and emissions.

Drill floor and mast can be fully rigged up at ground level. The rig floor consists of four loads – drawworks section, rotary section, setback section and a driller’s side doghouse that includes a driller’s cabin. Disassembly and assembly of the rig is accomplished without cranes and with reduced manpower and loads.

A "plug and play" adaptability, allowing the operator to quickly and easily customize the rig's individual equipment to the specifics of the drilling program.

Mast designed for maximum wind speeds of 87 mph with pipe racked and 115 mph without.

Substructure simultaneous casing load of 1,000,000 lbs. and setback 600,000 lbs.

Substructure 32 ft. high drill floor that allows 28 ft. working height from the ground to the bottom of the rotary beams.

A new mud system design, allowing easy cleaning, efficient mud processing in variable conditions, and flexible equipment additions for specific well programs.

MUD PUMPS

AUX.

GRASSHOPPER

M-1M-2

M-5

M-6

MUDGASSEPARATOR

M-3M-4

MS

-1M

S-2

MS

-3

CHOKEMANIFOLD

BIG BAGHOPPER

10.58 FT [3.23 M]

155.63 FT [47.44 M]

GENSET

ASSEMBLED MAST

LOWER MASTSECTION IN TRANSPORT

UPPER MASTSECTION IN TRANSPORT

(3) NATIONAL 12-P-160

MUD MIX

GENSETS MCC

PORCH

RESERVE PIT

INTERMEDIATE PIT

PROCESS PIT

SHAKER SKID

241.34 FT [73.56 M]

468.46 FT [142.79 M]

68

.79 F

T [

20

.97 M

]1

10

.42 F

T [

33

.66 M

]

17

9.2

0 F

T [

54

.62 M

]

TRI-PLEX MUD PUMPS

MUD MIXPORCH

R75.00

FT

[R22.

86 M]

10

0.0

0 F

T [

30

.48 M

]

74.02 FT [22.56 M]

95.51 FT [29.11 M]

C/L WELL

C/L WELL

Parker Drilling Rig 269L 2,800 hp AC Variable Frequency Drive Land Drilling Rig


Recommended