δ PARSIFAL DELTA

The design and manufacturing of the brand PARSIFAL derive

from the careful analysis of the converting market.

The need to produce packaging, even customised and at a low

cost and for much smaller quantities in regard to today’s produc-

tion standards are the main details outlined by the research.

In order to reach such target, the current way to produce con-

verted materials has undergone a complete change.

Up to the present, complex and expensive systems were used

for the production of sheets, covers, bags and bubble film

and foam coupled envelopes and these systems did further-

more not allow to process all converting products and imposed

very large production quantities that local transforming compa-

nies had trouble placing on the local markets.

The technology PARSIFAL - with its extremely innovative and

relevant applied solutions that remarkably overtake the past 30

years of engineering solutions applied to welding machines

– has made the production process more simple and unified, mak-

ing it possible, through the use of one single machine, to process

materials such as bubble film, foam and coupled also in small

quantities but with a totally innovative hourly production.

Cost reduction, meeting of delivery times and most of all the

capability to produce small customised batches that up to a while

ago were - from a cost point of view - impossible to deliver, can be

obtained through this result.

DESCRIPTION

Bobbin max. diameter mm 1.600

Bobbin max. width mm 2.000

Product max. lenght (distance of cross welds) mm endless

Worked product max. thickness mm 3+3

Transversal and longitudinal welding width mm 2

Bobbin support with triangle for single fold N. 2

Transversal welder with Parsifal pre-cut δ1 mm 1.300

Transversal welder with Parsifal pre-cut δ2 mm 1.600

Transversal welder with Parsifal pre-cut δ3 mm 2.000

Transversal welder with Parsifal pre-cut δ4 mm 2.500

Max welding temperature °C 270

Welding temperature setting field °C 1

Welding temperature tolerance °C +/- 2

Welding time Sec. from 0,05 a 1

Product translation Max speed m/min. 30

Mechanical speed 130 mm size Strokes/hr 13.850

Installed power Kw 8

Three-phase voltage Volts 380~415

Frequency Hz 50-60

Compressed air Bar 6

Air Bubble

Air Bubble + Metallized PP

Air Bubble + HD

Air Bubble + PE

Foam

Foam + Hd

Air Bubble + Foam

TECHNICAL FEATURES

WORKABLE MATERIALS

Second cross oscillator.

Lower heating device L. 1.300

Lower heating device L. 1.600

Lower heating device L. 2.000

Lower heating device L. 2.500

Welding bar for open end 1.300

Welding bar for open end 1.600

Welding bar for open end 2.000

Welding bar for open end 2.500

Longitudinal welding device.

Additional longitudinal welding device.

Longitudinal cutting device.

Additional longitudinal cutting device .

Punching device. (4 punching X)

Bobbing cutting device.

Line bobbin support L.1.300 mm.

Line bobbin support L.1.600 mm.

Line bobbin support L.2.000 mm.

Line bobbin support L.2.500 mm.

Cradle support for in line bobbin L.1.300 mm.

Cradle support for in line bobbin L.1.600 mm.

Cradle support for in line bobbin L.2.000 mm.

Cradle support for in line bobbin L.2.500 mm.

Checks for material presence .

Double adhesive tape bobbin support.

Additional double adhesive tape bobbin support.

1,500mm stacking device and gathering matt L=4,000x1,300mm

1,500mm stacking device and gathering matt L=4,000x1,600mm

1,500mm stacking device and gathering matt L=4,000x2,000mm

1,500mm stacking device and gathering matt L=4,000x2,500mm

Rewinder L=1,500mm

Additional gathering conveyor L. 3.000 x 1.300 mm.

Additional gathering conveyor L. 3.000 x 1.600 mm.

Additional gathering conveyor L. 3.000 x 2.000 mm.

Additional gathering conveyor L. 3.000 x 2.500 mm.

Hardware for tele-assistance

OPTIONALS

TYPE OF PRODUCTIONS

1

1

2

2

3

3

4

4

5

5

6

6

A A

B B

C C

D D

Denominazione

La OFFMAR S.r.l. si riserva a termini di legge la proprietà del presente disegno con divieto di riprodurlo o comunicarlo a terzi senza sua autorizzazione QUOTE NON IN TOLLERANZA h13 H13

Codice Foglio

Q.tà Scala Diseg. Data

ARIGNANO - TO - ITALY

Materiale Tratt. Superf. Tratt. Termico Dur. HRC

Dis. N°Commessa grezzo -- Peso -- finito Dim. grezzo

Stampa

Macchina/Gruppo

Dimensione

/

LAYOUT

PARSIFAL δ3

A31

ZANON Valter 28/04/2011

1222360

1 1

2334

3980

13851

710