+ All Categories
Home > Documents > PARTHAN PG 100 - HP Lubricants

PARTHAN PG 100 - HP Lubricants

Date post: 13-Apr-2022
Category:
Upload: others
View: 3 times
Download: 0 times
Share this document with a friend
1
For details log on to: www.hindustanpetroleum.com | Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: +91 22 23030000 Follow us on : www.facebook.com/hplubricantsfromhindustanpetroleum SPECIAL FEATURES Polyglycol based synthetic Compressor & Gear Lubricant having excellent EP Properties and lasts 7 to 8 times more as compared to mineral oil based gear lubricants. PARTHAN PG 100 readily separates water unlike other PAG products which are water soluble. SPECIFICATIONS Passes DIN 51506 VDL, DIN 51517 Part III (CLP) requirements and is also Factory Mutual Approved product. PHYSICO-CHEMICAL PROPERTIES POWER TO PERFORM Density at 15°C, g/cc 1.01 Flash Point, COC, °C 100 Pour Point, °C -33 Viscosity grade 100 Viscosity Index 222 Rust Test, ASTM D 665A ------- Pass ------- FZG Rating, Fail Stages ------- 12 min ------- Vickers 35VQ25 vane pump test Passes Vickers Vane Pump (ASTM D 2882) < 10 mg 4 ball WSD, mm, 1800 rpm, 75°C, 1 h 0.35 TOST life > 10,000 hrs RBOT minutes >1000 PARTHAN PG 100 INDUSTRIAL GEARBOX OILS
Transcript
Page 1: PARTHAN PG 100 - HP Lubricants

For details log on to: www.hindustanpetroleum.com | Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: +91 22 23030000Follow us on : www.facebook.com/hplubricantsfromhindustanpetroleum

SPECIAL FEATURES

Polyglycol based synthetic Compressor & Gear Lubricant having excellent EP Properties and lasts 7 to 8 times more as compared to mineral oil based gear lubricants. PARTHAN PG 100 readily separates water unlike other PAG products which are water soluble.

SPECIFICATIONS

Passes DIN 51506 VDL, DIN 51517 Part III (CLP) requirements and is also Factory Mutual Approved product.

PHYSICO-CHEMICAL PROPERTIES

P O W E R T O P E R FO R M

Density at 15°C, g/cc 1.01

Flash Point, COC, °C 100

Pour Point, °C -33

Viscosity grade 100

Viscosity Index 222

Rust Test, ASTM D 665A ------- Pass -------

FZG Rating, Fail Stages ------- 12 min -------

Vickers 35VQ25 vane pump test Passes

Vickers Vane Pump (ASTM D 2882) < 10 mg

4 ball WSD, mm, 1800 rpm, 75°C, 1 h 0.35

TOST life > 10,000 hrs

RBOT minutes >1000

PARTHAN PG 100INDUSTRIAL GEARBOX OILS

Recommended