BG
1
MANUFA
CTU
RERS’M
ARTA
NNUALB
UYERS’G
UIDE
FEBRUARY2014
2014Buyers’ Guide
– Special Pullout Section –
Participating Suppliers IndexAIR COMPRESSOR REBUILDERS. .......BG3488 Main Street, Leominster, MA 01453Toll-free 800-649-6064 • Fax 978-537-9871Website: www.drgair.com • Email: [email protected] assemblies and made to order hydraulic tubing while you wait. Large inventory of hydraulic, industrial, fire, air & water hose, fittings, adapters and teflon lines.
ALLIANCE SCALE INC. .....................BG41020 Turnpike Street, Canton, MA 02021Toll-free 800-343-6802 • Fax 781-828-9510Website: www.alliancescale.comEmail: [email protected] line of industrial scales and weighing systems. Sales, service, rentals, installations, calibration.
APPLIED DyNAMICS CORP.. ..............BG536 Butternut St, Greenfield, MA 01031Toll-free 800-505-0047 • Fax 413-773-7919Website: www.applied-dynamics.comEmail: [email protected] full line electrical and mechanical apparatus sales and service company. Over 50,000 sq. ft. of manufacturing/repair space. We also offer field service.
ASSOCIATED ELECTR0-MECHANICS ...BG6185 Rowland Street, Springfield, MA 01107Toll-free 800-288-4276 • Fax 413-788-4471Website: www.aemservices.comEmail: [email protected] independent industrial service center in the Northeast providing electrical, mechanical, machining, welding, and field services.
AUTOMATION INC. ..........................BG7707 Oakwood Avenue, West Hartford, CT 06110Toll-free 800-243-1862 • Fax 800-243-1826Website: www.automationincct.comFull line distributor of hydraulic and pneumatic hoses, tube fittings, brass fittings, quick couplings, flow controls and lubrication products.
BOSTON MACHINERy .......................BG8119 Foster Street, P.O. Box 271, Peabody, MA 01960978-532-1112 • Fax 978-532-2581Website: www.bostonmachinery.comEmail: [email protected] tools, including Clausing, Akira-Seiki, Victor, Kalamazoo, Dah Lih, Wells, Kent, Supertec. Full parts and service department for all makes of machinery.
CAPCO CRANE & HOIST, INC. ............BG958 Forest Ridge Drive, Rowley, MA 01969Toll-free 800-422-7261 • Fax 978-948-2294Website: www.capcocrane.comSpecializing in the sales, installation, manufacturing and inspection of overhead bridge cranes and hoists for industrial companies.
COMMERCIAL SCALE & BALANCE CO., INC ......................BG1036 Russo Circle, Agawam, MA 01001Toll-free 877-867-6272 • Fax 413-789-9141Website: www.csbco.comProviding weighing and testing products as well as service and calibrations to industrial and commercial markets throughout New England and the world.
DAWSON-MACDONALD ..................BG11845 Woburn Street, Wilmington, MA 01887Toll-free 800-556-4456 • Fax 978-657-8740Website: www.dawson-macdonald.comEmail: [email protected] blast cleaning and finishing equipment. Fume, mist collection, finishing systems, specialty products. Abrasive blast equipment maintenance/repair; preventive maintenance programs.
EAST COAST METROLOGy ...............BG12428-A Boston St., Topsfield, Massachusetts 01983978-887-5781 • Toll-free 877-402-2828Fax 978-887-5782 • Web: eastcoastmetrology.comMeasurement consulting and contract inspection services. Alignment and calibration, reverse engineering, metrology equipment rental and support, customized training courses, surface analysis, statistics and reporting.
ELECTRONIC fASTENERS INC. .........BG13305 Winter Street, Waltham, MA 02454Toll-free 800-370-0060 • Local 781-890-7780Fax 781-890-2042Website: www.electronicfasteners.comA stocking distributor supplying quality fasteners for industrial, commercial, and mil-spec fastener markets. Inch and metric fasteners, nuts, bolts, screws, rivets and pins. Wide variety of materials including stainless steel, nylon, silicon bronze, brass and aluminum fasteners.
fAXON ENGINEERING ....................BG1417 Britton Drive, Bloomfield, CT 06002Toll-free 800-54-FAXON Local: 860-236-4266Website: www.faxonengineering.comE-Mail: [email protected] of hose, fittings, hydraulic, pneumatic and lubrication components. ISO 9001+AS 9120 certified quality management system.
GUILBEAULT, D.R..........................BG15Hudson, NH – Northfield, NH – Leominster, MAToll-Free 800-856-4046 • Fax 603-598-0894Website: www.drgair.com • E-Mail: [email protected] compressor sales and service: installation, system piping, low and high pressure air systems, maintenance programs, rental units.
HARNUM INDUSTRIES ...................BG16Salisbury Industrial Park18 Fanaras Drive, Salisbury, MA 01952Toll-free 800-225-0998 • Local 978-685-7700Website: www.TheRigger.comEmail: [email protected] The Harnum family has been providing state-of-the-art rigging and millwright services for more than 70 years.
HARvARD MACHINERy ..................BG17325 Ayer Road (Rts. 110/111), Harvard, MAToll-Free 800-528-4066978-772-0309 • Fax 978-772-6400www.harvardmachinery.comSupplying high quality machined parts that meet all customer specifications and delivered on time.
KENNEDy, GUSTAfSON & COLE .......BG18100 White Oak Drive, Berlin, CT 06037860-828-3762 • Fax 860-828-2598Website: www.kgcsheetmetal.comHighly efficient air pollution control devices such as fume scrubbers, oil mist collection units and incineration systems; and HVAC design/install.
LOGAN STEEL ...............................BG191150 Old Colony Road, Meriden, CT 06451Toll-free 800-560-3317 • Local 203-235-0811Website: www.logansteel.comAlmost any structural size of steel you can imagine including oddball items, sizes, or shapes. Carbon steel a specialty. Large inventory of both Stainless and Aluminum. Wide range of metalworking services available.
tell them you found them in manufacturers’ mart!
FEBRUARY2014
MANUFA
CTU
RERS’M
ARTANNUALBUYERS’G
UIDE
BG
2
MARENA INDUSTRIES ....................BG20433 School Street, East Hartford, CT. 06108 Toll-free 800-862-7362 • Local 860-528-9701Website: www.marenaind.comGrinding Services, Contract CNC Machining, New & Reconditioned Centerless Grinder Workrest Blades, New Lapping Carrier Plates, New & Re-sharpened Shear Knives, and Used & Re-conditioned Machinery. We have the largest Way & Angle Surface Grinder in this area.
MASS CRANE & HOIST ...................BG2172 Progress Avenue, Tyngsboro, MA 018792 Cedar Street, Lewiston, ME 0424019 Burr Road, Plymouth, CT 06782Toll Free: 800-909-2299Website: www.masscrane.comEmail: [email protected] Crane builders, installers and technicians. Sales and service, engineering, installations, shop service, inspections and testing. Expert on-site crane operations safety training.
MASS-vAC/Mv PRODUCTS ..............BG22247 Rangeway Rd., N. Billerica, MA 01862978-667-2393 • Fax 978-671-0014Website: www.massvac.comVacuum pump support and service. New and used vacuum equipment, vacuum pump fluids and vacuum components. Complete line of vacuum inlet traps, exhaust traps, and oil filtration systems.
METRIC SCREW & TOOL CO. ............BG239 Lake St., Wakefield, MA 01880800-METRIC1, 781-245-4950 • Fax 781-246-3335Website: www.metricscrew-toolco.comEmail: [email protected] importing distributor stocking 40,000 items in the metric system. Full line of metric fasteners – steel, brass, and stainless, cutting tools, heli-coil mounts, fastener assortments, key stock, hand tools and more.
METROPOLITAN PIPE & SUPPLy CO. .............................BG24303 Binney Street, Cambridge, MA 02142Toll-free 800-MET-PIPE • Fax 617-354-3869Website: www.metpipe.comEmail: [email protected], valve automation, heating and cooling equipment and supplies. Stocking distributor of pipe, valves, fittings, and specialty products. One of New England’s largest inventories of valves.
NEW ENGLAND STAINLESS DISTRIBUTORS. ..........BG25Salisbury Industrial Park18 Fanaras Drive, Salisbury, MA 01952Toll-free 800-655-1299 • Local 978-255-4830Website: www.nesparts.comParts for virtually every pump, valve, flow promoting device, homogenizer, plate heat exchanger, gauge, pressure transmitter, and level control component used today. We offer sanitary stainless steel fittings, air operated valves, hand valves, rebonding, hoses, clamps, filters, strainers, floor drains, and all manner of sanitary and industrial components.
OHLHEISER CORP. .........................BG26831 North Mountain Road, Newington, CT 06111Toll-free 800-858-9368 • Fax 860-953-9234Website: www.ohlheiser.comAutomation and control, pneumatics, vacuum products. Also offering custom sub-assembly services, helping you with the design, fabrication and custom assemblies to meet your specifications.
THURROTT, D.L.. ...........................BG2717 Powder Hill Rd., Lincoln, RI 02865-4407Toll-free 800-795-7024 • Fax 401-334-6881Website: www.dlthurrott.comPumps and pumping systems, sales, service and repair. Extensive product line of more than 40 premier manufacturers, including Crane Deming, Enviro-Gear, Goulds, Grundfos, Jabsco, Wilden and many more.
TRAvER IDC.. ................................BG28151-165 Homer Street, Waterbury, CT 06704203-753-5103 • Fax 203-573-9352Toll-free: 1-800-TE-MOTORWebsite: TraverIDC.comA premier supplier of electrical apparatus and service to the industry of Connecticut through technologically advanced solutions. Service for all of your electrical, mechanical and electronic equipment. Experienced staff on call, 24 hours a day.
vAN WERT, G.E .............................BG29461 Boston Street, Topsfield, MA 01983978-887-3389 • Website: www.gevanwert.comInspection systems, metrology and calibration; CMMs, vision systems, microscopes, optical comparators, micrometers, high-accuracy gages, surface measuring devices.
WEBB, f.W. ..................................BG30200 Middlesex Turnpike, Burlington, MA 01803781-273-WEBB, 800-221-WEBBFax 781-270-0208 • Website: www.fwwebb.comNortheast’s largest provider of plumbing equipment/supplies: pipe, pumps, valves, fittings, bio-pharm components and industrial supplies. Extensive inventory provides from a single product to complex engineered systems for large facilities. 75+ locations.
WORCESTER SCALE CO ...................BG31228 Brooks StreetHiggins Industrial Park, Worcester, MA 01606Toll-free 800-698-5001 • Local 508-853-2886Website: www.worcscale.comOver 65 years experience selling and servicing counting and weighing systems to all industries. Basic product line as well as flexible systems and software to meet all your needs – turnkey or custom designed. Fully experienced in electronic scales for all environments. Emergency service in 24 hours or less.
STILL CAN’T fIND WHAT yOU’RE LOOKING fOR???
SEARCH OUR WEB SITE!WWW.MANUfACTURERSMART.COM
Participating Suppliers Index
BG
3
MANUFA
CTU
RERS’M
ARTA
NNUALB
UYERS’G
UIDE
FEBRUARY2014
Hydraulic, Adapter, Hydraulic tubing
Hose & CouplingAir Compressor Rebuilders, LLC
D.R. Guilbeault Air Compressor LLCHose Division
Serving New England Since 1973
At Air Compressor Rebuilders, our focus is on keeping your operations running smoothly, efficiently and cost effectively. We are a leading distributor for Gates.
We carry a large inventory of Hydraulic, Industrial, Fire, Air & Water Hose, Fittings, Adapters and Teflon Lines.
Accessories: Hydraulic Oil, Air Tool Lubricants, Hose Storage Reels, Hose Guards and much, much more.
Hose assemblies and made to order hydraulic tubing while you wait!
Hydraulic Hose: Cotton Cover,Wire Re-inforced, 1 & 2 Wire, Low, Medium
and High Pressure, 4000# Working Pressure up To 2”, 5000# Working
Pressure up to 1-1/2”, Non-Conductive Thermoplastic, Teflon and many others.
Industrial Hose: Chemical, Air & Multi Purpose, Petroleum Transfer &
Dispensing, Food & Beverage, Material Handling, Water, Steam, Marine,
Pressure Washer & Washdown, and many others.
Couplings:Metric, Cam & Groove, Live Swivel, Brass
Air/Water/ChemicalHose Reels, Gas Welding,
Power Cord Reels,Tool Balancers
Conveniently located right off Route 2 and Route 13.
488 Main Street, Leominster, MA 01453 • Tel: 800-649-6064 – Fax: 978-537-9871
Our Gates G32-XD hydraulic hose crimper can crimp all types of industrial and hydraulic hose, up to and including 6" in diameter. This new machine, combined with our extensive inventory of all types
of hose and fittings, gives us one of the largest crimping capacities in New England.
FEBRUARY2014
MANUFA
CTU
RERS’M
ARTANNUALBUYERS’G
UIDE
BG
4
1-800-343-68021020 Turnpike Street, Canton, MA 02021-0509
(781) 828-8386 • Fax (781) 828-9510email: [email protected]
IndustrIal & CommerICal sCales & WeIghIng systems
SaleS Service rentalS inStallation
Preventive Maintenance Program Offering
Preferential Rates onScheduled Maintenance
aSK aBoUt oUr a-1 Service Plan
Alliance Scale Inc. is a value added distributor for major manufacturers of industrial scales and weighing systems. We support and supply a wide range of scales from candy scales, industrial floor scales, crane scales, to sophisticated weighing systems. We have it all. Alliance Scale also
offers a complete label service for both stock and custom labels.
Industrial Weighing Solutions
Bench ScalesCheckweighersCounting ScalesCrane ScalesFloor ScalesIn-Motion CheckweighersOn Board
Weighing SystemsLoad CellsPrintersRailroad Track Scales
RetailSolutions
Basic Retail ScaleMettler/Toledo
Scale LabelsSupermarket
LabelsLabeling Equipment
Food ServicePortion ControlNTEP Legal For Trade
Portion ControlAccessories
WeightsGrip Handle WeightsWeight Sets
Laboratory SolutionsTouchless BalanceAnalytical BalancesMechanical BalancesMoisture AnalysisPortable BalancesPrecision BalancesConsumables
Rental SolutionsSoftwareSystemsTruck ScalesAccessories
BG
5
MANUFA
CTU
RERS’M
ARTA
NNUALB
UYERS’G
UIDE
FEBRUARY2014
Products in stockoff the shelfdelivery on:AC & DC MotorsAC & DC Drives
Gearboxes • BrushesHoists & Pumps
Ac motorsTeco, Elektrim,
Toshiba, North American,Baldor, Leeson, Lincoln,
General Electric,Marathon, US, Reliance,
WEG Electric
dc motorsFincor, Baldor/Powerton,
GE, Indiana General,ABB, Reliance
Ac drivesToshiba, Fincor,
Baldor, Yaskawa, ABB,Hitachi, Saftronics,
GE, Reliance,WEG Electric, Danfoss
dc drivesFincor, SSD, Saftronics,
GE, ABB, Reliance
hoistsCM, Coffing, Yale,
Budgit, Harrington
GeArboxesIPTS, Ohio Gear,
David Brown, SewEurodrive, Cone Drives,
Boston Gear, Foote Jones
motor brushesfor All APPlicAtions
Gould PumPs
WArren PumPs
trAnsformers
electricmotorservice
AppliedDynamicsCorporation
GleNs FAlls, NY4 reed street
Veteran Owned USAApplied Dynamics CorporationCorporate Office: Greenfield, MA
rePAirs, reWindinG, modificAtions & testinGPrinted Circuit Board Repair • AC/DC Drive Repairs • Servo MotorsComputerized Motor & Generator Rewinding, Modifications and TestingPCB Testing & Disposal • Transformers • Eddy Current Clutches • Varidrives• Encoders • Submersible Pump Repair • VPI (In-house Vacuum Pressure Impregnation service)
comPlete mAchine shoP fAcilitiesParts Repair & Fabrication • Job Shop Machine Work • Roll GrindingFlame Spraying • Custom Machine Building & Rebuilding • Bearing Rebabbitting• Computerized Balancing • Certified Welding • Rigging • Steel Fabrication
systems enGineerinGCustom Designed Motors and Controls • CAD/CAM Capability • Motor Redesign• Coordinated AC/DC Drives • Mechanical/Electrical Engineers on staff
field servicesInfrared Thermography • On Site Balancing • Electrical Analysis • MechanicalAnalysis • OSHA Hoist & Crane Inspection • Computer and Laser Alignment• AC/DC Drive Repairs
enerGy mAnAGementPower Factor Reading & Correction • Demand Reduction • Reduced VoltageStarters • Chart Recorder Rentals • Soft Starters • Harmonic Analysis
electricAl PoWer distribution equiPmentGE • ABB • FPE • WESTINGHOUSE • ITE • PAYNE • BENSHAW • Switch Gear• Starters • Circuit Breakers • Transformers • Motor Control Centers • Generators• Rectifiers • New, surplus, reconditioned
hoist & crAne divisionYALE Master Stocking Distributor • OSHA Inspections • Load Testing • RunwaySystem Analysis • Maintenance Programs • Consulting Services • Sales and Serviceon all makes and models
neW & rebuilt electric motorsAC & DC TO 3000 HP
1-855-722-686724 hour emergency service 7 days a week
free pickup and delivery 7 p.m. to 5 p.m. monday to friday
We buy and sell new and used equipment.
FEBRUARY2014
MANUFA
CTU
RERS’M
ARTANNUALBUYERS’G
UIDE
BG
6
ASSOCIATED ELECTROMECHANICS185 ROWLAND STREETSPRINGFIELD, MA 01107
ISO 9001 Compliant
AC MOTORS Sales & ServiceBaldor, Brook Hansen, Century, Emerson, G.E., Lincoln, Marathon, Reliance, Siemens, Sweco, TECO-Westinghouse, Toshiba, U.S., WEG, Worldwide
EXPLOSION PROOF, NEMA PREMIUM EFFICIENT, IEEE841 IN STOCK.115/230/460/575/2300/4160 V
DC MOTORS Sales & ServiceBaldor, Brook Hansen, Century, Emerson, Fincor, G.E., KEC, Marathon, Reliance, Toshiba
AUTHORIZED SERVICE & REPAIR FOR ALL AC & DCMOTORS. Foreign / Domestic
DC DRIVES Sales & ServiceABB, Baldor, Cleveland, Contrex-Fenner, Emerson/Control Techniques, Eurotherm, Fincor, G.E., Reliance, Saftronics
FACTORY TRAINED FIELD SERVICE AND START-UP. IN HOUSE DRIVE REPAIR.
AC VFDs & STARTERSAC Tech, ABB, Baldor, Benshaw, CMC, Control Techniques, Cutler Hammer, Emerson, Furnas, G.E., Motortronics, Reliance, Saftronics, Siemens, TECO, WEG, Yaskawa
FACTORY TRAINED FIELD SERVICE, INSTALLATION, AND STARTUP. STARTERS AND DRIVES IN STOCK
January, 2014 marked the 38th Anniversary for Associated Electro-Mechanics Inc. of Springfield.
Founded by the late Normand R. Lebeau and now owned by Elayne T. Lebeau, AEM remains the most diversified Industrial Sales & Services center in New England. We are DCAM and OSHA 10 Certified and are now officially a Woman Owned Business.
Our talented/dedicated men and women have worked very hard to accomplish another milestone this year.
We wish to thank our loyal customers and vendors for trusting AEM to be of services 24 hours a day, 7 days a week.
We wish the very best to all of the local businesses serving the local community, providing jobs and services helping to make Western Massachusetts and beyond a prosperous place to work and live.
The Staff of Associated Electro-Mechanics
Sincerely, Elayne T. Lebeau, CEO Roland Lebeau, COO
We Repair & Rebuild All Makes & ModelsBlowers ∙ Centrifuges ∙ Clutches ∙ Compressors ∙ Crushers ∙ Eddy Current Drives ∙ Feeders ∙ Gearboxes ∙ Hydro Generators ∙ Hydraulic Presses ∙ Pulpers ∙ Pumps ∙ Shaker Screens ∙ Turbines ∙ Vacuum Pumps ∙ Lightin Mixers
Factory Authorized Service Centerfor Greater New EnglandGardner Denver ∙Hoffman ∙ Lamson Centrifugal ∙ Gardner Denver/Roots Positive Displacement
Machining Capacity – CNC / Manual35 Ton Overhead Crane Capacity ∙ Lathe Capacity 63" Swing & 37' Centers ∙ Vertical Boring Mills ∙ 84" Horizontal Boring Mills ∙ OD Grinding ∙ ID Honing ∙ Keyseater ∙ 300 Ton Hydraulic Press ∙ CNC Milling & Lathe Capability ∙ Blanchard Grinding ∙ Field Machining Services Available/All Types
Electrical Repair Explosion Proof/UL ListedRewinding of AC & DC Motors ∙ Generators Hoists & Cranes ∙ Core Loss & Surge Testing Capabilities up to 30kv ∙ Epoxy & Polyester Resins Cryogenic Ice Blasting/Testing through 4160 VAC
Welding, Metal Spraying & PlatingMIG-TIG-SMAW-SUBARC ∙ Innershield ∙ OXY Acetylene Brazing ∙ Hard Facing ∙ Flame Hardening Bore Welding ∙ Vibratroy Stress Relieving ∙ Selective Brush Plating ∙ Electric Spray ARC Wire/SS Cladding
Field Service with Turnkey CapabilitiesUltrasonic Testing · Infrared Thermal Tech. Computerized Laser Align ∙ Hoist & Crane Repairs∙ Complete Machine Rebuilding & Retrofitting ∙ Hoist & Crane OSHA Compliance & Safety Inspect & Training ∙ Hydraulic Torqueing 150ft-lb to 30,000 ft-lb ∙ Vibro-Analysis & Field Balancing
DYNAMIC BALANCING5 Ton Capacity – 92" Swing X 192" Length
BABBITT, RADIAL & THRUST BEARINGSStatic & Sprayed
METAL STITCH REPAIR SPECIALISTSCrack repair on Cast Iron, Cast Aluminum, Pump Castings
Gearbox Casting, Engine Blocks, any and all Machinable Cast Parts
PICKUP & DELIVERY 24 HOURS A DAY – 7 DAYS A WEEK
SALES & SERVICE FOR ALL MANUFACTURERS
HOISTS AND CRANES: Yale, Duff Norton, Harrington, Coffing, Chester, Saturn, Lohed, Shepard Niles, Shaw Box, David Round, Control Chief, Telemotive, CMGEAR REDUCERS: Philadelphia, US, Falk, SEW-Eurodrive, Horsburgh & Scott, Foote Jones, Amarillo, Westinghouse, Flender BLOWERS: Gardner Denver, Sutorbilt, Lamson, Buffalo Forge, Hoffman, Spencer Turbine, Roots, Keaser, Universal, HolmesCHIP FEEDERS: Megatech, ACO, Rader, Myers
ALL MAKES AND MODELS OF PUMPS REPAIREDNortheast Authorized FLOWAY Factory Service Center
CALL 24 HRS 1-800-288-4276 FAX: 1-413-788-4471
Visit our Website at: www.aemservices.comEMAIL: [email protected]
SERVING ALL INDUSTRY IN THE NORTHEAST
THE ONE-STOP INDUSTRIAL SERVICE AND SALES FACILITY
BG
7
MANUFA
CTU
RERS’M
ARTA
NNUALB
UYERS’G
UIDE
FEBRUARY2014
Hose: A/C & Refrigeration • Air & Multi-Purpose • Air Brake Beverage Dispensing • Biodiesel • Chemical Service
Cleaning Service • Contractor • Everflex-Teflon • Food ServiceFuel • General Purpose • High Pressure 4 & 6 Spiral
Industrial Hose • Low & Medium Pressure • Material HandlingPetroleum Service • Specialty Service • Steam Service
Suction & Discharge • SynflexThermoplastic • Truck & Bus Hose
Hose Ends: Crimp On Hose Ends • Reusable Hose Ends
Accessories: Hose Assembly Systems • Metric Tube Fittings
Quick Couplings • Swivel JointsTruck Air Brake Tubing • Tube Assemblies
Fittings & Connectors: Brass: Compression, Flareless, SAE 45 Degree Flare, Quick
Connect, Air Brake, Pipe, Drain Cocks & Ball ValvesSteel: ORS, SAE O-Ring, Split Flange, SAE 45 Degree Flare,
JIC 37 Degree Flare & PipeMetric: British (BSPP) (BSPT), German (DIN),
Japanese (JIS), Kobelco & Komatsu
Systems: Adhesives, Sealants, Thread Lockers & Gasket Makers
Air Brake Hose Assemblies • Air Driven PumpsAir Presses, Cylinders & Valves • Air Tool Accessories • Blow Guns
Brass Valves: Including Ball, Needle, Check & ShutoffBrazing Alloys, Aerospace Grade Alloys & Precious Metal Alloys Cam & Groove Fittings • Coiled Hoses • Couplers & Connectors
Dry Break Couplings • FiltersFilter/Regulator/Lubricator Units • Hose Clamps
Hydraulic Power Units • Hydraulic Pumps, Cylinders, Valves & Jacks • Hydraulic Quick Disconnects • Industrial Ducting • Metal
Hoses • Plastic Tubing & Fittings • Pressure Boosters & Intensifiers Pressure Gauges • Rotary Union Joints • Silicone Hoses
Stainless Steel Fittings • Work Holding Devices & Pallet Fixtures
HYDRAULICS, PNEUMATICS& ACCESSORIES
Markets Served: Agricultural Machines • Automotive • Cement • Food & Beverage
Glass Industry • Industrial Machinery • Ink Supply Systems Machine Tools • Mobile Equipment
Off-Road Construction & Mining • On-Road Commercial Vehicles • Packaging • Printing • Pulp & Paper
Railroad Lubrication Systems • Steel • Wind Industry Lubrication Systems:
Centro-Matic • QuickLub • Modular Lube • Industrial Pumping Orsco • Railroad • Spray & Specialty • Ink Supply • Two-Line
Services: Automatic Lubrication System Design • Project Engineering Turn-Key On-Site Installations • On-Site & In-House Service Factory Authorized Warranty & Service Center • Pump Repair
Troubleshooting • Complete On-Site Personnel TrainingSystem Maintenance
General Lubrication: Heavy Duty Pumps: PowerMaster & PileDriver
General Lubrication Pumps: Reciprocating, Diaphragm & Transfer DEF: Diesel Exhaust Fluid Handling Systems
Fluid Control: Offers control over the authorization, management and recording of fluids used to service the growing fleets of private
and commercial vehicles and vehicle service centers.Hose Reels: Standard, Heavy Duty & High Flow
Control Valves & Meters: Manual Controls to Digital Preset MeteringUsed Fluid Systems: Draining oil and other fluids
from vehicles and other machinery.Grease Guns: Manual, Air-Operated and
PowerLuber Battery Operated.Air Line Products: Filters, Regulators and Lubricators
Mityvac: Automotive Vacuum-Related Tools & Equipment
Systems: Oil Lubrication Systems • Air/Oil Lubrication SystemsSpray Lubrication Systems • Mist Lubrication SystemsOil Recirculation Systems • Chain Lubrication Systems
Storage & Handling SystemsProducts:
• Oil Pumps • Grease Pumps • Coolant Pumps • Drum Pumps Manual Pumps • Fuel Transfer Pumps • Meter & Control Units Filters & Filter Elements • Pressure Switches • Solenoid Valves Tubing, Fittings & Accessories • Liquid Level Gauges • Gravity
Lubricators • Window Sites • Oil Flow Sites • Zerk Fittings
LUBRICATION EQUIPMENT& ACCESSORIES
AUTOMATION Inc.HYDRAULIC PNEUMATIC LUBRICATION EQUIPMENT
707 Oakwood Avenue – West Hartford, CT 06110 (860) 236-5991 (800) 243-1862 Fax (800) 243-1826
FEBRUARY2014
MANUFA
CTU
RERS’M
ARTANNUALBUYERS’G
UIDE
BG
8
OVER 70 YEARS in BUSINESSANSWERING YOUR MACHINE TOOL NEEDS!!!
FULLSERVICE/SUPPORT
PARTS and– APPLICATIONS –
LEASEPURCHASE
FINANCE
TURNING – MANUAL LATHESVICTOR TOOLROOM TYPE/GEAR HEADVICTOR TOOLROOM TYPE/VARI SPEEDTOOLMEX – POREBA – KENT USACLAUSING/COLCHESTER – METOSA
MILLING – MANUALCAMERON MICRO MILLS / CNCSHARP/FIRST – REPUBLIC LAGUNKENT USA w/ACU-RITEELECTRONIC VARI-SPEED HEADS
SAWING – VERT./HORIZ.W.F. WELLS PRODUCTION SAWSDAKE/JOHNSON – DAKEVICTOR – HORIZONTAL & VERTICALGROB VERTICAL BAND SAWSCOSEN PRODUCTION SAWS, CNCCLAUSING/KALAMAZOO/STARTRITEWELLSAW BANDSAW MACHINES
PRESSESROPER/WHITNEY KIDDER PUNCHESALVA ALLEN – OBI PUNCH PRESSESKNUTH HYDRAULIC LARGE BED PRESSES
MACHINE TOOLS
** Full Parts and Service Department – All Brands of Machinery, New and Used** Please come visit our Showroom & Full Training/Service Facility Soon!!!
TELEPHONE – (978) 532-1112 FAX – (978) 532-2581119 FOSTER STREET, P.O. BOX 271, PEABODY, MA 01960E-MAIL – [email protected] • [email protected]
TURNING – CNC CONTROLLEDAKIRA SEIKI USA TURNING CENTERS• LIVE TOOLING • FANUC • MILLINGO-M VTL’S – CLAUSING LONG BED CNCVICTOR ELECTRONIC LATHES, FRYERMILLING – CNC CONTROLLEDAKIRA SEIKI USA HORIZONAL/VERTICALPALLET CHANGERS – HIGH SPEED – PRECISIONKENT USA KNEE/BED MILLS w/ACU-RITE MILLPOWR – DAH LIH MACHINING CENTERSBIRMINGHAM CNC / MANUAL BED MILLSSAWING – CIRCULAR COLDDAKE KALAMAZOOSCOTCHMAN WILTONMACHINE TOOL ACCESSORIESACU-RITE – SONY – NEWALLHANSFORD/DAVIS KEYSEATERSKURT PRECISION VISES/DRAWBARSBUCK CHUCKS – SERVO PRODUCTSKENNMETAL – YUASA – BISON CHUCKSPRATT BURNERD AMERICA – ALORISACU-RITE - ANILAM CNC RETROFITSBISHAMON QUALITY PALLET JACKS
GRINDERS – SURFACE/ CNC OR MANUALSUPERTEC MANUAL & AUTOMATIC TYPE SUPERTEC CNC SURFACE GRINDERSKENT USA MANUAL & AUTOMATIC SURFACE CLAUSING MANUAL & AUTOMATIC SURFACESUPERTEC CYLINDRICAL GRINDERSOD / ID – MANUAL & AUTOMATIC – CNCSUPERTEC CENTERLESS GRINDERSFABRICATING MACHINESMETAL MUNCHER IRON WORKERSUNI - HYDRO IRON WORKERSSCOTCHMAN IRONWORKERSNATIONAL SHEARS, BRAKES & ROLLSCOLE TUVE ROLLS/ANGLE ROOLS/SHEARSBETENBENDER SHEARS & BRAKESBIRMINGHAM BRAKES & SHEARSDRILLING MACHINESVICTOR HEAVY DUTY RADIAL DRILLSCMM MACHINES – CNC ROUTERSSERVO SENSITIVE DRILLS & FEEDSCLAUSING – WILLIS – IBARMIAGEAR HEADS & MULTI SPINEDM – CNC & MANUALVICTOR EDM RAM TYPEGROMAX – SYSTEM 3R TOOLING
BISON
BG
9
MANUFA
CTU
RERS’M
ARTA
NNUALB
UYERS’G
UIDE
FEBRUARY2014
OVERHEAD CRANES, MONORAILS AND HOISTS
CAPCOCRANE & HOIST
INC.
24 HOUR EMERGENCY SERVICE
DISTRIBUTOR MOST MAJORBRANDS INCLUDING:
• ACE WORLD• CM• SHAWBOX• INGERSOL-RAND• ELECTRO-MOTIVE• CHESTER
• SERVING ALL NEW ENGLAND– MODERNIZATION– RETRO-FITS– UPGRADES
• CUSTOM BUILT BOX GIRDER CRANES• SPECIALISTS IN VARIABLE FREQUENCY
DRIVE CONTROLLERS(FACTORY TRAINED REPS)
Capco Crane & Hoist is a service organization located in the suburban Boston area specializing in the sales, installation,
manufacturing and inspection of overhead bridge cranes and hoists for industrial companies.
the FIRSt cmaa membeR In new england!
www.capcocrane.com
• DUCT-O-WIRE• ACCO• TELEMOTIVE• BUDGIT• YALE• DRIVECON
• REPAIR/INSTALL RADIO CONTROLS• SALES• INSTALLATION• SERVICE & REPAIR
– INSPECTIONS– EVALUATION & CONSULTATION ENGINEERING SERVICE– YEARLY MAINTENANCE CONTRACT– O.S.H.A COMPLIANCE INSPECTION
800-422-7261 Fax: 978-948-229458 Forest Ridge DriveRowley, MA 01969
CAPCO CRANE & HOIST INC.Web site: www.capcocrane.comCompany focus: Capco designs, fabricates and installs overhead bridge crane systemsProducts: Top- and under-running bridge cranes, box girder cranes, gantry cranes, jib cranes, custom cranes, runway systems and special custom lifting equipmentCrane class: CMAA Class A through Class F and hot metal applications, as well as trash-handling bucket cranes and stacker cranesLoad capacity: Up to 500 tonsHorizontal span: Up to 200 feet
“The consistent coordination effort and open lines of communication between Capco Crane, in-house engineering and trades was always conducted in a professional manner. Capco Crane never lost sight or focus on customer satisfaction throughout this project. Capco Crane & Hoist delivered a high-quality product backed up with constant personal attention, which made my customers very satisfied with the final product.”
– Paul Cordone, Pratt & Whitney
FEBRUARY2014
MANUFA
CTU
RERS’M
ARTANNUALBUYERS’G
UIDE
BG
10
Commercial and Industrial Weighingand Process Control Systems
SALES SERVICE RENTAL
• 24/7 emergency hot line• Certified test weights• Replacement load cells• Performance tracking software• Owner and operator training
commercial scale & balance co., inc.
ISO/IEC 17025 accreditation by the Laboratory Accreditation Bureau (L-A-B)
Floor Scales
Truck Scales
Counting Scales
Bench Scales
Shipping Scales
Forklift Scales
Checkweighers
Printers
Load Cells
Indicators
Balances
Software
36 Russo CircleAgawam, MA 01001
Phone: 413-789-9990Toll Free: 877-867-6272
Fax: 413-789-9141Web: www.csbco.com
BG
11
MANUFA
CTU
RERS’M
ARTA
NNUALB
UYERS’G
UIDE
FEBRUARY2014
845 Woburn Street, Wilmington, MA 01887Tel: 1-800-556-4456 / Fax: (978) 657-8740
E-mail: [email protected]: www.dawson-macdonald.com
Portable Sandblasters
Laser Stripping
Wet Blasting /Vapor Honing
Wide variety ofPowered Hand Tools (including Concrete
Cutting Saws)
Dry Ice Blasters Walk-In Blast Rooms
Steel & Concrete Deck
Blasters
Hand & AutomationSandblast Cabinets
Dust/Mist/Fume Collectors
DAWSON-MACDONALD CO., INC
serving industry since 1928
Developer and distributor of production manufacturing
equipment, systems and supplies for surface preparation.
We offer: Equipment Sales (new and used, parts and accessories)Service and Support • Rentals • Installation Services
Leasing • Prototype and Testing Facilities
ENHANCE YOUR PROCESS BY:Cleaning • Deburring • Deflashing
Etching to achieve proper surface texture for coatingsAchieving uniform surface appearance
Shot Peening for strength • Treating and applying coatingsCreating a clean, safe work environment • Eliminating chemicals
DAWSON-MACDONALD CO., INC
REMOVE:Paint • Scale • Rust • Surface ImperfectionsHeat Discoloration • Dust, Mist and Fumes
• ABRASIVE BLAST CLEANING AND FINISHING •Pressure • Suction • Wet • Wheelblast • Microblast Cabinets (manual, semi-auto, auto)
• Complete Blast Rooms (full or partial floor recovery) • Vacuum Blast SystemsPortable Equipment • All commercial grades of blast media including Plastic, Steel,
Walnut Shells, Glassbeads, Aluminum Oxide, Sponge, Dry Ice and Bicarb-Soda.
• DUST – FUME – MIST COLLECTION •Single or multiple source • Designed to meet current OSHA /NIOSH / EPA guidelines
• High quality Replacement Cartridges and Bags for most Collectors
• SPECIALTY PRODUCTS •Blastrac & Sawtec Floor Cleaning Systems • Coldjet Dry Ice • Accustrip BiCarb Systems
SSPC-Type Hand Tools (Grinders, Scrapers, Roto-Peeners, etc.) • BlastProIndustrial Vacuum Systems • Respiratory and Safety Equipment
Micro Abrasive Blasting & AbrasivesLaser Stripping • Explosion Proof Vacuums • Sponge Blasting
• SOME OF THE MANUFACTURERS WE REPRESENT •Empire Abrasive Equipment Corp. – Blastrac – Vaniman – ABS – Econoline – RuemelinIndustrial Vacuum Equipment – Boride Products – Pauli Systems – Wet Technologies
Cold Jet – Bullard Safety Equipment – Torit/Donaldson – Pauli & Griffin – BlastProWheelabrator Group – Schmidt/Axxiom– Sponge Jet – Armex (Church & Dwight) SodaWashington Mills/Exolon – Potters – Composition Materials – National Metal Abrasives
Adapt Laser Systems – Barton Mines – Saint Gobain Ceramic – P.K. Lindsey – Ruwac
FEBRUARY2014
MANUFA
CTU
RERS’M
ARTANNUALBUYERS’G
UIDE
BG
12
EAST COAST METROLOGY428A Boston Street, Topsfield, MA 01983
Tel 978-887-5781 / Fax: 978-887-5782www.EastCoastMetrology.com
CALiBRATiOn SERviCES And EquipMEnT REnTAL
Laser Trackers • Laser ScannersArticulating Arms
niST Traceable • iSO 9001 • iSO 17025
MEASuREMEnT SERviCES (in-hOuSE & OnSiTE)
dimensional inspection • Alignment Reverse Engineering
CMM • vision System • Gd&T • pCMM
Quick & Reliable calibRation at a Reasonable PRice.
neveR be without eQuiPment – loaneR oPtions available
foR all calibRations!
global measurement solutions
BG
13
MANUFA
CTU
RERS’M
ARTA
NNUALB
UYERS’G
UIDE
FEBRUARY2014
3M™ Cyclo Industries Marking and ID Systems Southco®
ACT Fastening Solutions East Coast Lifting Marson / Alcoa Spirol®
ATI Garryson Edward W. Daniel Matdan Fasteners Spotnails®
Akro-Mils Driv-Lok® Micro Plastics® SPS/Flexloc®
Alfa Tools ElectroTerm/Hollingsworth ND Industries® SPS/UnbracoAllen™ Felo Nylok® Stake FastenerAmatom® Genius® Tools PIC Design® Stillwater FastenersAPM Hexseal® Greenlite Cable Access. Power Coil® Superior WasherArmstrong® Greer Stop Nut® RAF™ Electronic Hardware Synco Chemical-SuperlubeAssociated Spring Groove-Pin Recoil®/Alcoa Tamperproof ScrewAutomated Inventory Solution Handles Unlimited Richco® TechflexAztech Locknut Heyco® Rocky MT Twist UicorpBerg W.M. High Five® Rosan UrreaBlind Bolt Company Hindley Rotor Clamp VertexBondhus® Holo-Krome® Rotor Clip Vibra-TiteBossard Industrial Rivet Ruland Wej-itCD Hardware Kerr™ Lakeside Safety Socket Wiha®
Camcar® Acument Keystone Seastrom Caplugs® Lee Spring® Seattle Glove Captive Fastener Long-Lok Fasteners Sierra Pacific Concord Electronics Lyn-Tron ITW Shakeproof Craftline Maclean - ESNA® Sherex
– Complete Line of Fasteners - VMI Specialists –
305 Winter Street, Waltham, MA 02454800.370.0060 Toll Free / 781.890.7780 Local
781.890.2042 Fax / [email protected]
Experts in FastenersExcellence in Service
PRODUCTS ABRASIVES • ADHESIVES • ANCHOR BOLTS • BEARINGS, GEARS, SHAFTS • BENT WIRE & HANGER BOLTS • BOLTS • BRAIDED SLEEVING • BUMPERS & FEET • CAPTIVE HARDWARE • CAPS/PLUGS • CLAMPS & COLLARS • CASTERS •
ELECTRONIC HARDWARE • FRONT PANEL HARDWARE • GLOVES • HANDLES/PULLS • INK TUBING • HINGES, LATCHES, LOCKS • INSERTS • LUBRICANTS • MADE-TO-PRINT • MARKING & ID SYSTEMS • METRIC FASTENERS • MILITARY
HARDWARE • MOLDED PRODUCTS • NUTS • NYLON HARDWARE • PC BOARD MOUNTING • PINS • RETAINING RINGS • RIVETS & RIVET NUTS • ROD, THREADED • SCREWS • SEALS • SECURITY SCREWS • SELF-
CLINCHING HARDWARE • SELF-LOCKING FASTENERS • SOCKET PRODUCTS • SPACERS & STANDOFFS • STAINLESS STEEL • STRAIN RELIEFS • SPRINGS • STORAGE SYSTEMS • TAPES • TERMINALS & TERMINAL BLOCKS • THREADLOCKERS • TOOLS, INDUSTRIAL •
WASHERS & STAMPINGS • WIRE MANAGEMENT SYSTEMS
www.electronicfasteners.com
Our Quality Management System is Certified to
ISO 9001:2008
FEB
RU
AR
Y 2
014
MA
NU
FAC
TUR
ER
S’ M
AR
T A
NN
UA
L B
UY
ER
S’ G
UID
E
BG
14
BG
15
MANUFA
CTU
RERS’M
ARTA
NNUALB
UYERS’G
UIDE
FEBRUARY2014
Hudson, NH – Northfield, NHLeominster, MA
Toll-Free (800) 856-4046Tel. (603) 598-0891Fax: (603) 598-0894
24-HOUREMERGENCY
SERVICE
Services: Any Type of Compressor • Installation, System PipingLow Pressure and High Pressure Air Systems • Medical Air & Vacuum
Maintenance Programs • Rental Units Available (Delivered & Installed) • Air Dryer RepairEngineered Services: Complete System Design • In-Plant Air Surveys • Energy Audits • Leak Detection
• Pressure, Flow & KW Monitoring
Manufacturer’s Distributor for:
Rotary Screw- Single & Two Stage- Variable Speed - VSD- Oil Free- High & Low Pressure- Vacuum- Portables
Air Dryers- Refrigerated- Twin Tower Desiccant
Filtration- Oil Removing- Oil/Water Separator- Drains
Reciprocating- Pressure & Splash- Climate Control Units- Oil Free
High Pressure Systems
Oil Free Rotary & Scroll- Single & Two Stage- Variable Speed - VSD- Air Cooled/Water Cooled
Pressure Vessels & Air Receivers
Safety Air Tool AccessoriesAir-Line Controls
Contractor CompressorsSprinkler Compressors
Air & Gas Filtration to 6000 psigDesiccant Dryers
Oil/Water Separators
Refrigerated Air DryersFilters
Desiccant Dryers
YOUR RELIABLE SOURCEFOR COMPRESSED AIR
EQUIPMENT AND SERVICE
Full Stock of Genuine Sullair Partsand Lubricants
Web Site: www.drgair.com • Email: [email protected]
Industrial
Hose Reels
CRPOil / WaterSeparators
AIR COMPRESSOR REBUILDERS, LLCDIVISION OF D.R. GUILBEAULT
488 MAIN STREETLEOMINSTER, MA 01453
TEL: (978) 537-6064Serving New England since 1973
and of course... SERVICE SERVICE SERVICE!!
(603)-598-089117 Park Ave, Hudson, NH 03051
Serving New EnglandSince 1986
FEBRUARY2014
MANUFA
CTU
RERS’M
ARTANNUALBUYERS’G
UIDE
BG
16
therigger.com
HARNUM INDUSTRIES, LTD.1-800-225-0998Salisbury Industrial Park
18 Fanaras Drive, Salisbury, MA 01952978-685-7700 FAX 978-255-4833
Rigging • Crane Rental • Custom ConcreteHarnum Industries – TheRigger.com, located in Salisbury, MA and Hampton, NH provides state of the art rigging and millwright services. The Harnum family has been in business over 70 years and we are fully experienced and insured. Our riggers, equipment and management team are on call anytime. Give us a call for an estimate on your project needs.
Rigging Services and Specialties• Millwright and Laser Alignment Services • CNC and Precision Machinery• Turnkey Plant Relocations • Food and Beverage Equipment• Cryogenic Storage Vessels • Plastic Production Machinery• Boiler, Steam and Air Handling Units • High Value and Museum Artifacts Specialty Rigging• Paper Production Machinery • Indoor and Outdoor Storage and Crating
Custom Concrete Services• Turnkey Foundation Pads for all Machinery • Core Drilling• Loading Dock Construction and Repair • Floor Cutting• Pier Supports • Custom Silo Pads• Floor Drains, Pits and FDA Curbing • Concrete Floors
Crane Services• 22 to 240 Ton Hydraulic Cranes for all lifting needs
Steel Fabrication – Certified Welders• HVAC Roof Structures and Supports • Assembly of Pre-Fabricated Steel Buildings• Walkways, Decks, Stairs and Handrails • Welding and Certified Welders
Transportation
Our Fleet of Specialized Trucks Include:• Flatbed Trailers • Vans with Full Logistics• Straight Trucks • Air Ride Equipment• Step Deck Trailers • Full Fleet of Fork Lifts• Double Drop Trailers • Ramp Trucks
Museum & Specialized RiggingTheRigger.com specializes in rigging, moving and assembly of multi-million dollar museum artifacts and displays. We cater to curators, directors and members of the art community with care and expertise to bring special projects in on time and with complete confidence.
If you have equipment to Move, Rig, Transport or RelocateTheRigger.com is only a phone call away.
Call 1-800-225-0998 today for the best service.e-mail: [email protected] • Website: www.TheRigger.com
BG
17
MANUFA
CTU
RERS’M
ARTA
NNUALB
UYERS’G
UIDE
FEBRUARY2014
325 Ayer Road (Rts 110/111) Harvard, MA 01451Local Phone # 978-772-0309 • Fax 978-772-6400
800-528-4066From prototype to production, we offer quality work with competitive prices. Our capabilities include
milling, turning, boring, grinding, cutting, shearing, forming and of course, welding. Typical materials range from stainless steel, aluminum and brass, to hastelloy,
titanium, molybdenum and tungsten. We are a full-service facility capable of producing a single custom piece to thousands of machined parts. We will take
care of all your specific needs. We use state-of-the-art equipment and stay current with technology changes that are required to maintain our position as a desired
supplier in a very competitive industry.
Custom manufacturer of metal machined parts
– Manufacturing Capabilities by Machine –Turning
Clausing 17 x 40" Lathe, 3" Spindle Bore, Inch & Metric Threading, With 3 Axis, .0001 Resolution DRO
Milltronics Slant Bed Lathe 10 x 20Milltronics 20 x 40 CNC Lathe w/ 3.2
Spindle HoleHardinge TFB LatheHardinge HLvH w/ .0001 DRO
ProgrammingSoftware
2d ProcamCamworks 3dSolidworks Design Autocad 2d
Miscellaneous Capabilities
Green D-2 Pantograph Engraver37 Kva 3 Phase Transformer(2) Jones & Lamson Pc-14 Optical
Comparators6000 Lb Fork Truck Cat2500 Lb Fork Truck Clark4000 Lb Fork Truck Tcm
WeldingHobart 300 Amp Mig Welder w/Spool
Gun For Aluminum CapabilitiesOxy-acetelyne Welding/Cutting UnitMiller Synchrowave 250 Amp Tig
WelderMiller XR Alumafeed 400 Amp Mig
WelderLincoln 250 Amp Mig Welder
GrindingBaldor Double End Diamond
Wheel Carbide Grindervertical Belt Grinders-4"Elb 8 x 18 3-axis Surface GrinderBrown & Sharpe 618 MicromasterBrown & Sharpe 5 x 10 Surface
Grinder
PressesGreenerd 3 Ton Arbor PressGreenerd 12-ton Hydraulic Press
Shearing/FormingPiranha P50 IronworkerDiacro 16ga x 24" ShearDiacro 16ga x 9" Precision ShearNational 16ga x 52" Foot ShearPexto 24" Finger Brake36" Bending Rolls
CuttingMinitul ½" Capacity Precision
Abrasive SawDoAll 16" vertical SawBevo Cold SawDoAll 30" vertical Saw
Drilling(2) 14" Drill Presses w/ Tapping HeadsHydmec 16" Cut-off Saw
Milling – Horizontal & Boring
(2) Nichols Horizontal Toolroom Hand Millers
Kearney & Trecker Horizontal Milling Machine 12 x 48" Travel
Pfeifer 3" Horizontal Boring Mill w/ 2-axis DRO
Milling – Vertical,Conventional & CNC
1-Fanuc Robodrill T21IEL PC2 High Speed Machining Center , 31I Model A5 Control, 24000 rpm Spindle, Palletized, Travel: 27.5"x 15.75 x 13"
1-Milltronics vM 20 vMC w/ 15000 rpm Spindle, Travel: 20" x 40" x 26"
1-Milltronics vM 20 vMC w/ 15000 rpm Spindle, Travel: 20" x 30" x 26"
1- Milltronics Machining Center RH 20 20 x 40
Bridgeport Series 1, variable Speed Milling Machine 9 x 12" Table w/ 2-axis Acu-rite DRO
Sharp HMv Milling Machine 10 x 50" Table w/ Prototrak 3-axis Control
Sharp HMv Milling Machine 10 x 50" Table w/ Prototrak 2-axis Control
Hauser 20 x 30 Jig Borer w/ .00005" DRO
InspectionTesa Hite 700Faro Gage CmmTesa Hite 700Miscellaneous Measuring InstrumentsIncluding Gage Pins, Gage Blocks,
Micrometers,Calipers, Bore Gages, Etc.
Large Assortment of Raw Stock
FEBRUARY2014
MANUFA
CTU
RERS’M
ARTANNUALBUYERS’G
UIDE
BG
18 Kennedy,
Gustafson& Cole, Inc.
100 White Oak DriveBerlin, CT 06037Phone: 860-828-3762Fax: 860-828-2598www.kgcsheetmetal.com
KGC
COMPLETE AIR QUALITY SOLUTIONS
– FREE ESTIMATES –
• Air Compressor Duct Systems• Dust Collecting Systems
& Components• Exhaust Hoods• Fume Scrubbers• HVAC Ductwork
• Industrial Fans: New and Repaired• Machine Drip Pans
• Machine Guards to OSHA Standards• Makeup Air Units & Plant Evaluation
• Oil Mist Collectors and Systems• On-site Welding and Custom Fabricating
• Plant Ventilation Systems• Plating Tanks
• PVC Fans and Duct Systems• Replacements Bags for Cloth
Tube Dust Arrestors• Spray Booths
• Stainless Steel Fabricationand more!
BG
19
MANUFA
CTU
RERS’M
ARTA
NNUALB
UYERS’G
UIDE
FEBRUARY2014
Stainless & Aluminum Too
Largest Inventory of gaLvanIzed MaterIaLs on eastern seaboard
Plate to 2-1/2" channels 1" to 18" bar grating rectangular tube ½ x 1 to 8 x 16Flats to 1 x 12 angle ½ x ½ to 8 x 8 griP strut diamond Floor Platerounds to 12" sheets 7 ga to 24 ga corrugated decking abrasive Platebeams 3" to 36" exPanded metal square tube ½" to 16" hi-strength PlatePiPe ½ to 24" rebar & wire mesh c.r. rounds & Flats round tubing hrew & crew
i beamschannelflitch platesgratingpipewire meshhot rolled barshot rolled platereinforcing rod
hot rolled sheetcold rolled sheetgalvanized sheetabrasion resistant plateangle (hot rolled & galvanized)
expanded metalhand rail moldingtubing (round, square & rectangular)
wide flange beams
Like Us on Facebook
Logan Rents Road Plates from 4’ x 4’ to 8’ x 28’
open monday thru friday 8 a.m. to 4:30 p.m. saturday 8:00 to noonvisit our bargain barn inventory for additional $ savings
We deliver on our own trucks
• cnc plasma cutting 2-1/2" x 10' x 23' • rebar bends to no: 8's• automated saw cutting 24 x 18 -60˚ • angle lentils• one of new england's largest braKes • shearing 3/4" 12'• beam line- drilling- 36" x 50' • bending 1/4 14'• iron worKers 185 ton • mitre cutting• plate roll • tees made to order
– vaLUe added servICes –
800-560-3317 • 1150 old colony Rd. • meRiden, ct • logansteel.com
FEBRUARY2014
MANUFA
CTU
RERS’M
ARTANNUALBUYERS’G
UIDE
BG
20
Our water jet department is a cOntinuatiOn Of marena industries inc.’s already extensive industrial services.
800.862.7362
PHONE (860) 528-9701FAX (860) 528-3995
[email protected]@AOL.cOm
we Have expanded Our tecHnilOGical & industrial capacity and prOudly annOunce a new waterjet
department at marena industries inc.Marena Industries, Inc., located in East Hartford, CT. has recently purchased and installed a new Mitsubishi Classica CL 3000 water jet cutting machine. Our machine can cut virtually any material within a 5' x 10' envelope, up to 6" in thickness. This includes, but is not limited to:
• All types of Steel and Alloys• Aluminum• Ceramic• Composites
• Titanium• Stone, including Granite• Plastic• Rubber
Our trained and highly skilled technicians can easily program the CL3000 for short or long running projects. It’s a whole new level of growth in achieving value and productivity in processing your parts. We welcome your inquiries in hopes of opening new avenues of business through water jet cutting.
please visit our web siteswww.marenaind.com • www.favrettousa.com • www.machinerysavings.com
and feel free to contact us for any of your industrial needs.
• Contract CNC Machining• Contract Surface & Slide Way Grinding• New & Reconditioned Centerless Grinder
Workrest Blades
• Shear Knives/Blades• Lapping/Carrier Plates• Sales and Purchase of New and
Reconditioned Machinery
We specialize in:
We have a long tradition in refurbishing and/or rebuilding machine tools throughout the metalworking industry. Your machine is received, disassembled, cleaned and
inspected against the original manufacturer’s specifications. All major castings are ground and/or scraped to restore proper form, fit and original alignment
accuracy. Worn parts are repaired or replaced as required to insure trouble-free operation. Prior to assembly the entire machine is primed and painted
to a finish color of your choice. The reassembled machine is then run off to insure that all functions perform correctly and that alignment accuracies have been achieved before shipment.
BG
21
MANUFA
CTU
RERS’M
ARTA
NNUALB
UYERS’G
UIDE
FEBRUARY2014
STEPSAHEADIN CRANE & HOIST SALES, SERVICE, AND ENGINEERING
The Mass Crane & Hoist Companies:
Mass Crane & HoistTyngsboro, MAmasscrane.com800-909-2299
CT Crane & HoistPlymouth, CTctcrane.com800-999-5040
New England CraneLewiston, MEnewenglandcrane.com888-450-0477
TURN-KEY SYSTEMS• Single Girder Top-Running/Under-Running Cranes• Double Girder Top-Running Cranes• Box Girder Cranes• Patented Track Cranes and Monorails• Below-the-Hook Lifters and Rigging Equipment
ENGINEERING & DESIGN• Renowned for innovative, effective design solutions• Custom ergonomic systems and devices
FABRICATION• Complete in-house design and fabrication• Free Standing Support Structures• Building integration
SERVICE• 24-Hour Emergency Service• Technicians possess an average of
15 years experience• Service Manager possesses
30 years experience• OSHA Compliance Training &
Safety Awareness Program• MCH Tracker System for
Preventive Maintenance and OSHA Compliance
BRANDS• Lift-Tech• CM• Aero-Motive• Budgit• Shaw-Box• Gorbel• TC/American• Anver Corporation• Duct-O Wire• Insul 8• Electromotive Systems• R&M• Harrington
Ace
FEBRUARY2014
MANUFA
CTU
RERS’M
ARTANNUALBUYERS’G
UIDE
BG
22 Master Vacuum Pump Rebuilders
• Rush Service Available
• Flexible Options for PFPE Pumps
• Field Service and Maintenance Contracts Available
• Rebuilt Pumps In Stock for Immediate Delivery
– Large Inventory of Fluids, Components and Supplies –
From rotary vane and piston pumps to the latest dry pump technology, Mass-Vac Inc. is recognized by vacuum equipment manufacturers and users alike as experts in their field. First class facilities, unparalleled training and experience and vast technical resources are all at the service of our greatest asset: the best pump rebuilding technicians in the industry. For “like new” pump performance, go with the best!
978-667-2393
247 Rangeway Rd., P.O. Box 359N. Billerica, MA 01862
Fax (978) 671-0014 • www.massvac.comE-mail: [email protected]
The Newest and Finest in Vacuum Pump Protection
MV Multi Trap®A high-capacity, high conductance trap that protects pumps against corrosive chemicals and abrasive particles in your vacuum system.
Oil Mist EliminatorsAttaches to your pump’s exhaust line, directing the exhaust through pleated, low resistance microfiberglass coalescing filters to remove oil mist before it gets into room air.
VisiFlowOil Filtration SystemsCompact, self-contained portable system continuously filters mechanical pump fluids, reducing maintenance and prolonging pump and fluid life.
MV Posi-Trap®A positive sealed trap that eliminates blow-by, protects your pump from process contamination and your system from oil backstreaming.
BG
23
MANUFA
CTU
RERS’M
ARTA
NNUALB
UYERS’G
UIDE
FEBRUARY2014
OVER 40,000 METRIC ITEMS IN STOCK!
9 Lake Street, Wakefield, MA 01880
CATALOG DEPT
PHONE 1-781-245-2507FAX 1-781-246-3335
metricscrew-toolco.com
SALES DEPTPHONE 1-781-245-4950PHONE 1-800-METRIC1FAX 1-888-XMETRIC
METRIC SCREW & TOOL CO.
We carry every type of fastener imaginable, PLUS:Thread repair kits, taps, tools and drills by
ALSO: grease fittings, key stock, threaded rod, roller chain, o-rings, shim stock, knobs, handles, levers, hand reamers, end mills,
counterbores, broaches, oil impregnated bearings, hex key sets, precision assembly tools, socket sets, wrenches, hook spanners,
pin spanners, screw cutters, pin punches, pliers,calipers, micrometers, thickness gages, pitch gages,
steel rulers, precision tape measures,
AND MUCH, MUCH MORE!!!!
New England's broadest range of METRIC FASTENERS & COMPONENTSof the highest quality, at competitive prices, delivered on time
and supported by a very knowledgeable sales staff.
EVERYTHINGMETRIC
BG
25
MANUFA
CTU
RERS’M
ARTA
NNUALB
UYERS’G
UIDE
FEBRUARY2014
NEW ENGLAND STAINLESS DISTRIBUTORS
New Corporate Headquarters-18 Fanaras Drive-Salisbury, MA 01952 Tel. 978-255-4830 – Toll Free 800-655-1299 – Fax 617-830-4866
DISTRIBUTORS OF SANITARY PROCESS FLOW EQUIPMENT
PLATE HEAT EXCHANGERS, PUMPS, VALVES, FITTINGS, CUSTOM FABRICATION
Stocking all sanitary and industrial tubing, fittings, hoses , seal kits for all major pump brands.
We are pleased to announce that
New England Stainless Distributors
and
Harnum Industries, Ltd.
have moved to our their state of the art corporate headquarters and warehouse in Salisbury
Massachusetts
Located in the Salisbury Industrial Park at 18 Fanaras Drive our two companies welcome new clients and old to visit us
anytime.
We are pleased to announce that Harnum Industries, Ltd. andNew England Stainless Distributors have moved to our state of the art corporate headquarters and warehouse in Salisbury, Massachusetts. Located in the Salisbury Industrial Park at 18 Fanaras Drive, our two
companies welcome new clients and old to visit us anytime.
FEBRUARY2014
MANUFA
CTU
RERS’M
ARTANNUALBUYERS’G
UIDE
BG
26
Authorized Distributor for the Following ManufacturersPNEUMATICSAIRLINE COMPONENTS• Filters, Regulators, Lubricators• Ambient Dryers• Water Separators
PNEUMATIC VALVES• Solenoid Operated• Air Operated• Manual Operated• Soft-Start Safety Valve• Flow ControlCYLINDERS/LINEAR ACTUATORS• Inch and Metric Sizes• Rodless Slides to 16-foot Stroke• Guided Cylinders• Anti-stiction/Low Friction
AUTOMATION COMPONENTS• Grippers• Rotary Actuators• Air Slide Tables• Multiple Action Actuators
COMPRESSORS• Diaphragm, Rotary Vane, Piston• Oil-less and Lubricated
BLOWERS• RegenerativeAIR MOTORS• 1/4 HP to 9 HP
CONNECTORS• Fittings – Inch and Metric• One Touch• Brass, Stainless Steel• Quick Connect
TUBING/HOSE• Inch and Metric• Polyurethane, Nylon, PVC
VORTEK PRODUCTS• Air Amplifiers, Air Knives• Cold Air Guns
AUTOMATION AND CONTROLSENSOR TECHNOLOGY• Photoelectric• Proximity• Laser• Fiber Optic• Ultrasonic• RFID• Measurement• Pressure• VacuumAUTOMATION CONTROLS• Programmable Controllers• Touch Screens• HMIs• Temperature Controllers
MOTION CONTROLS• Motion Controllers• Servo Motors and Amplifiers• Variable Frequency Drives• Rotary Encoders
CONNECTIVITY• Network Cables• Network I/O• Advanced Bus Products• Cordsets• Industrial Ethernet• Field WireablesROBOTS• SCARA• Six-Axis
GAUGES• Pressure• Vacuum
VACUUMVACUUM PUMPS• Diaphragm, Rotary and Vane Piston• Oil-less and Lubricated• Vacuum to 29.5" Hg.
AIR DRIVEN VENTURI PUMPS• Single and Multi-stage• Vacuum to 27" Hg.
BLOWERS• Regenerative
VACUUM COMPONENTS• Valves and Ejectors• Air Suction Filters• Vacuum Cups• Switches• High Vacuum Valves
SAFETYSAFETY SWITCHES• Mechanical Interlock• Non-contact•Position and Limit
SAFETY RELAYS• E-stop Relays• Safety Gate Relays• Light Curtain Relays• Time Delay Relays• Two-hand Control RelaysLIGHT CURTAINS• Finger, Hand, Arm/Foot Sensing
SAFETY CONTACT• Mats• Edges• Bumpers
SIGNALING DEVICES• Stacklights, Signal Towers• Beacons, Buzzers
PERIMETER GUARDING
Ohlheiser Corporation
The Ohlheiser Corporation is ISO 9001:2000 Registeredand a Member of the Fluid Power Distributors Association
831 North Mountain Road • Newington, CT 06111PHONE: 1-800-858-9368 • FAX: 860-953-9234
Serving the Northeast
Since 1960.
Web site: www.ohlheiser.com
Compressors & BlowersVacuum Pumps & Gear Motors
STABILUS...technology gives comfort
Gas Springs & Dampers
LINEAR SYSTEMNBAdvanced Linear Motion
Technology: Bearings, Shafts, Slides, Ball Screw Actuators
Pneumatic & HydraulicQuick Disconnects
SMC Pneumatics Full LineTechnology Distributor
Airpot CorporationWe make what you make run smoother
Anti-Stick Cylinders& Dashpots
Machine Sensors & Vision
Sensing the Future CompressorsVacuum Pumps
Sub-Assembly
Service Available
We Accept Visa, MasterCard and
American Express Credit CardsPumps & Drives
Photoelectric, Inductive, Ultrasonic Sensors &
Incremental & Absolute Controllers
Connectivity ComponentsRFID
The New Name forAromat/NAIS
PLCs, HMIs, Temp. Control, AC Servo Motors & Drives
Pressure Gauges & Sensors
Moving Coil ActuatorsQuick Coupling Solutions
Managed Ethernet Switches
Air Tools & Accessories
BG
27
MANUFA
CTU
RERS’M
ARTA
NNUALB
UYERS’G
UIDE
FEBRUARY2014
Industrial Compressors
ATLAS COPCO
Boiler Feed/Condensate Return Systems
ADVANTAGE SERIES
SALES, SERVICE & REPAIRS
LECHLER SPRAY NOZZLES NORTHEAST RUBBER PODUCTS
Vertical / Immersible Multi-Stage
GRUNDFOS
Single/Multi-Stage Centrifugal
GOULDS / G&L
Sanitary-3A Centrifugal Pumps
AMPCO
Drum Pumps
LUTZ
Peristaltic Pumps
MASTERFLEX
High Pressure Piston
CAT
© 2013
M4 INSTRUMENTS
In-process pH Probes Heavy Duty Applications Low Maintenance Steam Sterilizable
External Gear
ROPER
Hi-Pressure Diaphragm
WANNER /HYDRACELL
Air Operated: Double Diaphragm
WILDEN
Full Line of Positive Rotary Blowers
ROOTS
Centrifugal, Vertical & Horizontal
PRICE
Mag-Drive ANSI Pumps Chemicals / High Purity Sealless Run Dry
IWAKI
Rotary Lobe / Flexible Impeller
ITT-JABSCO
Vertical Turbine/ Centrifugal
CRANE DEMING
Industrial & Sanitary
CORNELL
External Gear
TUTHILL
Compressed Air Purification Equipment Twin Tower, Regenerative Air Dryers Dessicants & Activated Carbon Absorbers
PNEUMATIC PRODUCTS
PUMPS, BLOWERS, & COMPRESSORS
FEBRUARY2014
MANUFA
CTU
RERS’M
ARTANNUALBUYERS’G
UIDE
BG
28
151-165 Homer St.Waterbury, CT 06704
T 203.753.5103 F 203.573.9352
TraverIDC.com1.800.TE.MOTOR motor repair contracting supply energy
conservationengineering
BG
31
MANUFA
CTU
RERS’M
ARTA
NNUALB
UYERS’G
UIDE
FEBRUARY2014
Turn a conventional lift truck into a mobile scale for greater efficiency and tighter inventory control. The Avery Weigh-Tronix QTLTS Forklift Scale System includes a durable, front-mounted scale carriage with accurate Weigh Bar® electronic weight sensors and a choice of two in-cab instruments. The system allows operators to easily and quickly capture weight data en route, without extra steps.
WORCESTER SCALE CO., INC.SINCE 1948
ISO/IEC 17025 ACCREDITED CALIBRATION COMPANY
WORCESTER SCALE COMPANY, INC.New England’s Most Experienced Dealership
Over 65 years experience selling and servicing counting and weighing systems to all industries.Basic product line as well as flexible systems and software to meet all your needs – turnkey or custom designed.
Fully experienced in electronic scales for all environments.Emergency service in 24 hours or less.
1-800-698-5001
PRODUCTS
& SERVICES
Bench ScalesCounting ScalesCrane ScalesFloor ScalesForce MeasurementLab BalancesLift Truck ScalesPallet Truck ScalesPortable ScalesTruck Scales
Calibration Program(traceable toN.I.S.T.)
Custom SoftwarePackages
Service On All Makes & Models
Rental ScalesFloor ScalesCounting ScalesSMD CountersCrane ScalesDynamometers
Heavy Capacity Test TruckNIST Certified • Weights to 24,500lbs
Powered Cart to perform section test and test individual load cells
(508) 853-2886 • Fax (508) 853-2902228 Brooks St., Higgins Industrial Park, Worcester, MA 01606
Northeast Office – Concord, NH (603) 230-9894 • Southeast Office – E. Bridgewater, MA (508) 378-9169www.worcscale.com
Weigh-Tronix QTLTS Forklift Scale
calibration
FEBRUARY2014
MANUFA
CTU
RERS’M
ARTANNUALBUYERS’G
UIDE
BG
32
abrasivesDawson-Macdonald Co. ................... BG11
adhesivesElectronic Fasteners Inc. ................ BG13
air compressorsAir Compressor Rebuilders .................BG3Guilbeault, D.R. ............................ BG15
air Quality systemsKennedy, Gustafson & Cole.............. BG18
aluminumLogan Steel .................................. BG19
analyzersEast Coast Metrology ..................... BG12Van Wert, G.E. .............................. BG29
assembly servicesOhlheiser Corp .............................. BG26
automationAutomation Inc ...............................BG7Ohlheiser Corp. ............................. BG26Traver IDC .................................... BG28
Bar coding systemsAlliance Scale ................................BG4
Blades/KnivesMarena Industries .......................... BG20
Blast cleaningDawson-Macdonald Co. ................... BG11
BorescopesVan Wert, G.E. .............................. BG29
Boring millsBoston Machinery ............................BG8
Brakes/Brake motorsApplied Dynamics ............................BG5 Associated Electro-Mechanics ...........BG6
calibrationAlliance Scale ................................BG4Commercial Scale & Balance ............ BG10East Coast Metrology ..................... BG12Worcester Scale ............................. BG31
carbon steelLogan Steel .................................. BG19
cnc milling machinesBoston Machinery ............................BG8
compressorsAir Compressor Rebuilders .................BG3Guilbeault, D.R. ............................ BG15
contract machining servicesHarvard Machinery ......................... BG17Marena Industries .......................... BG20
controls/control systemsAutomation Inc ...............................BG7Faxon Engineering Co. .................... BG14Ohlheiser Corp. ............................. BG26Traver IDC .................................... BG28
counting scalesAlliance Scale .................................BG4Commercial Scale & Balance ............ BG10Worcester Scale ............................. BG31
couplingsAir Compressor Rebuilders .................BG3Automation Inc ...............................BG7Webb, F.W. .................................. BG30
cranes, Parts & accessories, trainingApplied Dynamics ............................BG5 Capco Crane & Hoist ........................BG9Mass Crane & Hoist ........................ BG21
cutters/GrindersBoston Machinery ............................BG8Marena Industries .......................... BG20
cylindersAutomation Inc ...............................BG7Faxon Engineering ......................... BG14
data acquisitionEast Coast Metrology ..................... BG12
degassing systemsMass-Vac ...................................... BG22
drilling machinesBoston Machinery ............................BG8
drives & controlsApplied Dynamics ............................BG5 Associated Electro-Mechanics ............BG6Mass Crane & Hoist ........................ BG21Ohlheiser Corp. ............................. BG26Traver IDC .................................... BG28
dryers, airGuilbeault, D.R. ............................ BG15
ductworkKennedy, Gustafson & Cole.............. BG18
Products & Services Indexdust collection/fume control
Dawson-Macdonald ........................ BG11Kennedy, Gustafson & Cole.............. BG18
edm machinesBoston Machinery ............................BG8
electrical repair & serviceApplied Dynamics ............................BG5 Associated Electro-Mechanics ............BG6Traver IDC .................................... BG28
electronic hardwareElectronic Fasteners Inc. ................ BG13 Metric Screw & Tool Co .................. BG23
enclosuresTraver IDC .................................... BG28
energy conservationApplied Dynamics ............................BG5 Traver IDC .................................... BG28
ergonomicsMass Crane & Hoist ........................ BG21
fabricating equipmentBoston Machinery ............................BG8
fastenersElectronic Fasteners Inc. ................ BG13Metric Screw & Tool Co .................. BG23
filtersDawson-Macdonald Co. ................... BG11Guilbeault, D.R. ............................ BG15Mass-Vac ...................................... BG22
finishing systemsDawson-Macdonald Co. ................... BG11
fittingsAir Compressor Rebuilders .................BG3Automation Inc ...............................BG7Faxon Engineering ......................... BG14New England Stainless Distributors .. BG25 Webb, F.W. .................................. BG30
fluid/air componentsFaxon Engineering Co. .................... BG14
floor scalesAlliance Scale .................................BG4Commercial Scale & Balance ............ BG10Worcester Scale ............................. BG31
GagesVan Wert, G.E. .............................. BG29
Galvanized materialLogan Steel .................................. BG19
Gearmotors/reducersApplied Dynamics ............................BG5 Associated Electro-Mechanics ...........BG6Ohlheiser Corp. ............................. BG26Traver IDC .................................... BG28
Grating, metalLogan Steel .................................. BG19
Grinding equipmentBoston Machinery ............................BG8Marena Industries .......................... BG20
Grinding servicesHarvard Machinery ......................... BG17Marena Industries .......................... BG20
hand toolsMetric Screw & Tool Co .................. BG23
hoistsCapco Crane & Hoist ........................BG9Mass Crane & Hoist ........................ BG21
hose/hose assembliesAir Compressor Rebuilders .................BG3Automation Inc ...............................BG7Faxon Engineering Co. .................... BG14
hVacWebb, F.W. .................................. BG30
hydraulic/Pneumatic equip.Automation Inc ...............................BG7Faxon Engineering Co. .................... BG14Ohlheiser Corp. ............................. BG26
instruments, measuringVan Wert, G.E. .............................. BG29
inventory management systemsWebb, F.W. .................................. BG30
Kitting/PackagingElectronic Fasteners Inc. ................ BG13
labelersAlliance Scale ................................BG4
lapping/carrier PlatesMarena Industries .......................... BG20
laser scannersEast Coast Metrology ..................... BG12
lifting equipmentApplied Dynamics ............................BG5
Automation Inc ...............................BG7Capco Crane & Hoist ........................BG9Mass Crane & Hoist ........................ BG21
lubrication ProductsAutomation Inc ...............................BG7Electronic Fasteners Inc. ................ BG13
machine retrofitting & rebuildingAssociated Electro-Mechanics ...........BG6Boston Machinery ............................BG8Marena Industries .......................... BG20Mass Crane & Hoist ........................ BG21
machine shop servicesApplied Dynamics ............................BG5 Associated Electro-Mechanics ............BG6Traver IDC .................................... BG28
machining services, ProductionHarvard Machinery ......................... BG17
machine tools & accessoriesBoston Machinery ............................BG8Harvard Machinery ......................... BG17
maintenance equipment & suppliesWebb, F.W. .................................. BG30
material handling equipmentAlliance Scale ................................BG4Mass Crane & Hoist ........................ BG21
measurement servicesEast Coast Metrology ..................... BG12
mechanical drivesApplied Dynamics ............................BG5 Associated Electro-Mechanics ...........BG6Traver IDC .................................... BG28
medical emergency suppliesWebb, F.W. .................................. BG30
metal cutting & sawingLogan Steel .................................. BG19 Marena Industries .......................... BG20
metalsLogan Steel .................................. BG19
metric fastenersElectronic Fasteners Inc. ................ BG13 Metric Screw & Tool Co .................. BG23
metrologyEast Coast Metrology ..................... BG12
microscopesVan Wert, G.E. .............................. BG29
millwright servicesHarnum Industries ......................... BG16
mist eliminatorsMass-Vac ...................................... BG22
motion controlOhlheiser Corp. ............................. BG26Traver IDC .................................... BG28
motors/controlsApplied Dynamics ............................BG5Associated Electro-Mechanics ...........BG6Traver IDC .................................... BG28
oil filtrationMass-Vac ...................................... BG22
optical comparatorsVan Wert, G.E. .............................. BG29
osha complianceKennedy, Gustafson & Cole.............. BG18
Packaging equipment & suppliesAlliance Scale ................................BG4
Pipe, Valves, fittingsMetropolitan Pipe .......................... BG24Webb, F.W. .................................. BG30
Plate, metalLogan Steel .................................. BG19
Plumbing supplies/equip.Metropolitan Pipe .......................... BG24Webb, F.W. .................................. BG30
PneumaticsFaxon Engineering Co. .................... BG14Ohlheiser Corp .............................. BG26
Power Workholding/liftingMass Crane & Hoist ........................ BG21
PrototypingHarvard Machinery ......................... BG17
PumpsMass-Vac ...................................... BG22New England Stainless Distributors .. BG25 Thurrott, D.L. ............................... BG27Traver IDC .................................... BG28Webb, F.W. .................................. BG30
Quick disconnectsAir Compressor Rebuilders .................BG3Automation Inc. ..............................BG7
Faxon Engineering Co. .................... BG14Webb, F.W. .................................. BG30
rigging servicesHarnum Industries ......................... BG16
road Plate rentalsLogan Steel .................................. BG19
safety systemsOhlheiser Corp .............................. BG26
sand Blasting equipmentDawson-Macdonald Co. ................... BG11
sanitary Process equipmentNew England Stainless Distributors .. BG25
scalesAlliance Scale ................................BG4Commercial Scale & Balance ............ BG10Worcester Scale ............................. BG31
screwsElectronic Fasteners Inc. ................ BG13 Metric Screw & Tool Co .................. BG23
sensorsEast Coast Metrology ..................... BG12Traver IDC .................................... BG28
servosAssociated Electro-Mechanics ...........BG6Traver IDC .................................... BG28
sheet metalLogan Steel .................................. BG19
shipping room suppliesAlliance Scale ................................BG4
stainless fasteners, metricElectronic Fasteners Inc. ................ BG13 Metric Screw & Tool Co .................. BG23
steelLogan Steel .................................. BG19
steel fabricationHarnum Industries ......................... BG16Kennedy, Gustafson & Cole.............. BG18
switchesOhlheiser Corp. ............................. BG26
testing equipmentEast Coast Metrology ..................... BG12
threaded rodElectronic Fasteners Inc. ................ BG13 Metric Screw & Tool Co .................. BG23
tools, hand/Power/airMetric Screw & Tool Co. .................. BG23Van Wert, G.E. .............................. BG29
tools, metric measuringMetric Screw & Tool Co. .................. BG23
transformersTraver IDC .................................... BG28
transportationHarnum Industries ......................... BG16
truck scalesAlliance Scale ................................BG4Commercial Scale & Balance ............ BG10
tubingAir Compressor Rebuilders .................BG3Automation Inc ...............................BG7Faxon Engineering ......................... BG14Webb, F.W. .................................. BG30
Vacuum Products Thurrott, D.L. ............................... BG27Mass-Vac ...................................... BG22Ohlheiser Corp. ............................. BG26
Valves/Valve automationAutomation Inc ...............................BG7Faxon Engineering Co. .................... BG14Metropolitan Pipe .......................... BG24New England Stainless Distributors .. BG25 Webb, F.W. .................................. BG30
Variable frequency drives/startersAssociated Electro-Mechanics ............BG6Traver IDC .................................... BG28
Vendor managed inventoryElectronic Fasteners Inc. ................ BG13
Ventilation systemsKennedy, Gustafson & Cole.............. BG18
Vision systemsEast Coast Metrology ..................... BG12Van Wert, G.E. .............................. BG29
Weighing systemsAlliance Scale ................................BG4Commercial Scale & Balance ............ BG10Worcester Scale ............................. BG31
WeldingAssociated Electro-Mechanics ...........BG6Harnum Industries ......................... BG16