ABRASIVE DISKS Rex-Cut Products Inc., Fall Riuer, Mass.
A full line of quick-change cotton fiber abrasive disks for blending, finishing, deburring, and edge
breaking stainless steel struc- free surface, improved paint tures, Rex-Cut cotton Fiber Quick adhesion, and higher resistance Change Disks, feature multiple to corrosion and salt spray. Dirt layers of nonwoven cotton fiber and lubricants, which build up on that are impregnated with abra- the metal substrate throughout sive grains and pressed and the manufacturing process, are bonded together to constantly re- completely removed with cleaners veal fresh abrasives as they work. that break the surface tension. They blend and finish stainless Types of cleaners include alka- steel in one step, which elimi- line, synthetic, emulsion, deter- nates multiple finishing opera- gent, acid, or special combina- tions. tions thereof. Circle 411 on the reader service card Circle 412 on the reader service card
METAL CLEANERS
Houghton International Inc., Valley Forge, Pa.
STAINLESS STEEL CLEANEWPDLISH CRC Industries Inc., Warminster, Pa.
The Houghto-Clean customizable line of metal cleaners for conver- sion coatings is designed to re- move all debris for a water break-
CRC HydroForce Stainless Steel Cleaner and Polish, a blend of powerful aqueous-based cleaner and durable metal polish, uses an exclusive CRC ultrashine for- mula. It eliminates dirt, dust, fin- gerprints, and watermarks from stainless steel and leaves behind a lasting stainless steel shine. Hy- droForce is noncorrosive, non- flammable, biodegradable, and nonozone depleting.
/NDUSTR/ES, /NC. 115 East Main Street, Belding MI 48809 l 616-794-0410 or 616-691-8195
Fax: 616-794-3424 l E-mail: [email protected] l www.belcoind.com
Circle 008 on reader card or go to www.thru.tolwebconnect
Circle 413 on the reader service card
TRIVALENT CHROMIUM CONVERSION COATING Aldoa Co., Detroit
Aldokote ZN-3 is a trivalent chro- mium salts conversion coating for electroplated acid zinc deposits. The formulation is a two-compo- nent solution that produces a bright and highly corrosion-resis- tant clear to slightly iridescent conversion coating. The coating formulation provides an easy-to- prepare, -use, and -maintain bath that requires no additional steps or secondary topcoats. Aldokote ZN-3 can provide a protection of more than 120 hours of neutral salt spray testing against the ap- pearance of white corrosion. Circle 414 on the reader service card
PARTS CLEANING SYSTEM Graymills Corp., Chicago
Metal Finishing
Graymills’ Biomatic Parts Clean-
ing System uses the natural tech- nology of bioremediation to re- duce solid waste and virtually
eliminate liquid waste. After fill-
Nitec 5000 is a low (I -4% phos) electroless nickel for
m , l
high “as deposited” hardness. Uniform, semi-bright,
llnd Mwe Chuices in
versatile! Use on allov steels, ceramics, hundreds of
Electroless Nickel i
LOW-PHOS
HI-PHOS
Passes the nitric acid test. Nitec 85 uses a
Nitec 85 - semi-bright; ideal for high corrosion
non-sulfur stabilizer.
resistance cvith excellent ductility. Plates uniformly;
deposits on steel, stainless, aluminum, copper
alloys, titanium, magnesium beryllium.
ing the parts washer with Super Biotene cleaning solution you then release a small packet of liv- ing microbes into the solution, which cleans the solution. Oil, grease, and other hydrocarbons are converted to carbon dioxide and water. Bioremediation almost completely eliminates the need for, and the costs associated with, hazardous waste disposal. Circle 415 on the reader service card
TUNNEL OVEN
The Grieve Corp., Palatine, Ill.
No. 878 is a 350” gas-heated tun- nel oven from Grieve, currently
substrates! Superior’stability, and solderability.
MIL-C-26074, AMS-2404C and AMS-24056.
MID-PHOS
Contamination-tolerant. 6-l& phosphorus;
ideal over aluminum.
Nifec 7.5 and @H-regulated) Nitec 95 - Ion cost per ml sq.A! Stable and plate-out resistant.
T&t Nltec performance on your components’ Call
Ihe Heatbofb Answer Nefwork today to arrange
tample processing, or for details and documentation
on the Nitec processes
(4131543-3381 _
@
Heatbath Nifec 9000 - Plates at a fast 0.8-1.2 mls,‘hour, depositing a very bright coating on steel,
copper, brass, aluminum and other substrates.
Exceptional hardnesses as plated, with mid to low
phosphorus content Runs with the ease of a mid-phos, with hardness and bvear equal to the finest low phos.
CORPORATION @ P.O. Box 2978
Springfield, MA 01102
Fax: (413) 543-2378
www.heatbath.com WI
Chlcugo * Detroit
Circle 021 on reader card or go to www.thru.to/webconnect
used for drying water from alumi- num parts hung on a monorail pass-through conveyor at the cus- tomer’s facility. The oven is sus- pended from the factory ceiling and operated by a remote control panel. A 6,000 cfm, 5-hp recircu- lating blower provides vertical downward airflow to the work- load, while a 500,000 BTU/HR in- stalled in the modulating natural
gas blower heats the workspce. The tunnel oven features an alu- minized steel interior and exte- rior. Circle 416 on the reader service card
FILTERING UNITS
DeVilbiss, ITW Industrial Finishing, Glendale Heights, Ill.
The DeVilbiss CleanAir product line features four types of filtering
December 2001 55