PARTS OF THE LATHE MACHINE

BANCADA: It constitutes the supporting surface and the backbone of a lathe

head

It is fixed on the left side of the lathe bed and on it are mounted

usually the bodies responsible for transmitting the movement of the motor

axis.

the Counterpoint

It is used to support the other end of the workpiece during the

machining, or to hold various cutting tools, such as drills,

reamers and taps.

Home Shopping:

It is also called longitudinal slide. This slides over the part

top of the guides of the bed.

Apron:

It is the part of the car that gives down, facing the operator. contains

gears and clutches that transmit forward movement

bolt pattern and bar cilindrar longitudinal and transverse carriage.

The Norton Safe:

For rapid change of speed, it is the connecting element that transmits

power between the spindle and the carriage.

BURIN: The "Burin" is a manual cutting tool with a steel tip. It serves primarily for cutting, grooving or grinding material to cold by beating undergoing the chisel with proper hammer.

Lathe Tools

GRAFILADOR: It is a tool used for finishing relief to parts used with the hands, as a rattle or screwdrivers.

3-jaw turntable:

  Universal securing plates having three jaws

autocentrantes moving with a single key

Plate 4 independent jaws: dishes independent in which each jaw is fitted with an input of autonomous key.