PASSIVE EQUIPMENT CATALOGUE 9 (A4) · 2014. 6. 26. · The Axell Wireless series of Low Power...

Passive Equipment Catalogue Issue 9 (A4), March 2011 Page 1 of 58 © Axell Wireless Ltd www.axellwireless.com

PASSIVE EQUIPMENT CATALOGUE

Axell Wireless Limited Head Office: Aerial House, Asheridge Road, Chesham, Buckinghamshire,

HP5 2QD, United Kingdom Tel: + 44 (0) 1494 777000 Fax: + 44 (0) 1494 777002

[email protected]

Passive Equipment Catalogue

Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 2 of 58 © Axell Wireless Ltd www.axellwireless.com

Contents LOW POWER SPLITTERS ....................................................................................................................................4

120-240MHz, N type Connectors, 2 Way............................................................................................................4 300-500MHz, N type Connectors, 2, 3 & 4 Way .................................................................................................5 300-960MHz, N type Connectors, 2, 3 & 4 Way .................................................................................................6 800-2500MHz, N type Connectors, 2, 3 & 4 Way ...............................................................................................7 800-2500MHz, 7/16 DIN Connectors, 2, 3 & 4 Way............................................................................................8 700-2700MHz, N type Connectors, 2, 3 & 4 Way ...............................................................................................9 800-2500MHz SMA Connectors, 2 & 3 Way .....................................................................................................10 2000-4200MHz, N type Connectors, 2 Way......................................................................................................11

SPLITTER/COMBINERS......................................................................................................................................12 68-470MHz, N type Connectors, 2 Way............................................................................................................12 140-470MHz, N type or 7/16DIN Connectors, 2 Way .......................................................................................13 88-2700MHz, Broadband, N type Connectors, 2 Way ......................................................................................14 140/470MHz, N type Connectors, 4 Way ..........................................................................................................15

MULTI-BAND LOW LOSS REACTIVE POWER SPLITTERS .............................................................................16 1700-2500MHz, N type Connectors, 2, 3 & 4 Way ...........................................................................................16 800-2500MHz, N type Connectors, 2, 3 & 4 Way .............................................................................................17 800-2500MHz, 7/16 DIN Connectors, 2, 3 & 4 Way..........................................................................................18 700-2700MHz, N type Connectors, 2, 3 & 4 Way .............................................................................................19 380-2700MHz N type Connectors, 2, 3 & 4 Way ..............................................................................................20

DUAL-BAND LOW LOSS REACTIVE POWER SPLITTERS...............................................................................21 300-960MHz N type Connectors, 2 Way...........................................................................................................21 300-960MHz, 7/16 DIN Connectors, 2 Way ......................................................................................................22

DIRECTIONAL COUPLERS.................................................................................................................................23 120-240MHz, 6 & 10dB, N type Connectors .....................................................................................................23 300-500MHz, 6 to 30dB, N type Connectors.....................................................................................................24 300-960MHz, 6 to 30dB, N type Connectors.....................................................................................................25 800-2500MHz, 5 to 30dB, N type Connectors...................................................................................................26 800-2500MHz, 5 to 30dB, 7/16 DIN Connectors...............................................................................................27 700-2700MHz, 5 to 20dB, N type Connectors...................................................................................................28 700-2700MHz, 20 & 30dB Tap..........................................................................................................................29 380-2700MHz, 6, 10, 15, 20 & 30dB Tap..........................................................................................................30 140/470MHz, 6 & 10dB Tap ..............................................................................................................................31 140/470MHz, 10 & 30dB Tap ............................................................................................................................32 150/2200MHz, 6, 10, 15, 20 & 30dB Tap ..........................................................................................................33 70/1000MHz, 6, 10, 15, 20 & 30dB Tap ............................................................................................................34 Dual Directional 30dB Coupler 824-2170MHz ..................................................................................................35

3 dB HYBRID COUPLER/COMBINERS ..............................................................................................................36 120 to 240MHz, N type Connectors, 30dB Minimum Isolation..........................................................................36 300-500MHz, N type Connectors, 35dB Isolation, Minimum ............................................................................37 300-960MHz, N type Connectors, 23dB Minimum Isolation .............................................................................38 800-960MHz, N type or 7/16 DIN Connectors, 35dB Minimum Isolation, .........................................................39

MULTI-BAND HYBRID COUPLER/COMBINERS................................................................................................40 800-2500MHz, N or 7/16 DIN Connectors, 25dB Minimum Isolation................................................................40 700-2700MHz, N type Connectors, 22dB Minimum Isolation ...........................................................................41 1710-2200MHz, N or 7/16 DIN Connectors, 30dB Minimum Isolation..............................................................42

CROSSBAND COUPLERS/DIPLEXERS.............................................................................................................43 500/800MHz, N or 7/16 DIN Connectors, 50dB Minimum Isolation ..................................................................43 490/650MHz, N Connectors, 40dB Minimum Isolation......................................................................................44 108/143MHz, N Connectors, Isolation >30dB ...................................................................................................45 250/380MHz, N Connectors, Isolation >30dB ...................................................................................................46 400/440MHz, 7/16DIN Connectors, Isolation >30dB ........................................................................................47 1000/1700MHz, N type Connectors, Isolation >50dB .......................................................................................48 2170/2400MHz, N type Connectors, Isolation >40dB .......................................................................................49 1000/1710MHz, 7/16DIN Connectors, Isolation >47dB ....................................................................................50



NETWORK COMBINERS.....................................................................................................................................51 4X4 Hybrid Matrix Combiner/Splitter, 800-2200MHz, N type or 7/16 DIN Connectors.....................................51

MULTI-BAND LOW LOSS POWER TAPS...........................................................................................................52 800-2500MHz, N type Connectors, 30dB Minimum Isolation, ..........................................................................52 Unequal Power Splitters, 700-2700MHz, N type Connectors ...........................................................................53

LOW & MEDIUM POWER LOAD TERMINATIONS.............................................................................................54 HIGH POWER LOAD TERMINATIONS...............................................................................................................55 HIGH POWER 150W LOAD TERMINATIONS.....................................................................................................56 COAXIAL FIXED ATTENUATORS.......................................................................................................................57 ABOUT AXELL WIRELESS..................................................................................................................................58

Drawings in this document are not to scale, all dimensions shown in mm, all specifications are subject to change without prior notice



79 994089

LOW POWER SPLITTERS 120-240MHz, N type Connectors, 2 Way

50Watt Average Power 20dB Isolation, Min Minimal RF Insertion Loss High Reliability Environment IP65 N type female connectors

The Axell Wireless series of Low Power Splitters is designed to evenly split power cellular signals with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The device can be used with antennas, leaky cable systems and wireless base stations.

Part Number Frequency Band, MHz

Split Insertion Loss dB Max

Split Loss, dB

Weight, g

90-851402 120 - 240 2 0.3 3 625

Maximum VSWR 1.20:1 Average Power Rating 50W Minimum Isolation 20dB Impedance 50 Ohm Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium

or powder paint Connectors N (f) tri-plate DC transmission Between all ports



131

121

3030

141

30

Ø 4.5

194

158

120

22

90-85120370 903880

LOW POWER SPLITTERS 300-500MHz, N type Connectors, 2, 3 & 4 Way

50Watt Average Power 20dB Isolation, Min Minimal RF Insertion Loss High Reliability Environment IP65 N type female connectors



Split Insertion Loss dB Max

Split Loss, dB

Weight, g

90-851202 300 - 500 2 0.3 3 400 90-851203 300 - 500 3 0.5 4.8 720 90-851204 300 - 500 4 0.4 6 800

Maximum VSWR 1.20:1 Average Power Rating 50W Minimum Isolation 20dB Impedance 50 Ohm Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium




68 883678 107

97

3030

117

137

127

3030

147

30


Dual-Band Frequency Range, TETRA & Cellular 50Watt Average Power 20dB Isolation, Min Minimal RF Insertion Loss High Reliability Environment IP65

The Axell Wireless series of Low Power Splitters is designed to evenly split power cellular signals with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The device can be used with antennas, leaky cable systems and wireless base stations. Part Number Frequency Band,

MHz Split Insertion Loss

dB Max Split Loss,

dB Reflected Power

Watts max. Weight,

g 90-851302 300 - 960 2 0.3 3 5 320 90-851303 300 - 960 3 0.5 4.8 9 620 90-851304 300 - 960 4 0.4 6 8 800

Maximum VSWR 1.35:1 Average Power Rating 50W Minimum Isolation 20dB PIM, Passive IM -130dBc, 2x43dBm Impedance 50 Ohm Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium




131

121

2828

141

28

Ø 4.5

129

93

101

91

30

83

22

30

11190-85100359 793069


Multiple-Band Frequency Range, Cellular, PCS, UMTS 50Watt Average Power 20dB Isolation, Min Minimal RF Insertion Loss High Reliability Environment IP65 N type female connectors


Part Number Frequency Band, MHz Split Insertion Loss dB Max

Split Loss, dB

Weight, g

90-851002 800-2500 2 0.3 3 240 90-851003 800-2500 3 0.5 4.8 420 90-851004 800-2500 4 0.4 6 600





143.4

133.

4

9090-851013

3669.5 30.5

120

100

60110

163.

4

12060

LOW POWER SPLITTERS 800-2500MHz, 7/16 DIN Connectors, 2, 3 & 4 Way

Multiple-Band Frequency Range, Cellular, PCS, UMTS 50Watt Average Power 20dB Isolation, Min Minimal RF Insertion Loss High Reliability Environment IP65 7/16 DIN female connectors


Part Number Frequency Band, MHz Split Insertion Loss dB Max

Split Loss, dB

Weight, g

90-851012 800-2500 2 0.3 3 820 90-851013 800-2500 3 0.5 4.8 1020 90-851014 800-2500 4 0.4 6 1330


or powder paint Connectors 7/16 DIN (f) tri-plate DC transmission Between all ports



121

141

28131

2828

Ø 4.5

109

73

63

90-851102

22

Ø 4.5

159

123

105

115

30

113

90-851103 110

22

30


Multiple-Band Frequency Range, Cellular, PCS, UMTS 100Watt Average Power 20dB Isolation, Min Minimal RF Insertion Loss High Reliability Environment IP65 N type female connectors


Part Number

VSWR Split Isolation Typ.

Insertion Loss dB

Max

Split Loss dB

Power Combing

Reflected Power

Weightg

90-851102 1.25 2 20dB 0.4 3 0.5W 3W 240 90-851103 1.25 3 20dB 0.6 4.8 0.5W 3W 500 90-851104 1.30 4 20dB@800-2500MHz

18dB@700-2700MHz 0.6 6 0.5W 5W 620

Frequency 700 - 2700MHz Average Power Rating 50W PIM, Passive IM -130dBc, 2x43dBm Impedance 50 Ohm Temperature Range -35ºC to +75C Environment IP65, RoHS compliant Housing Passivated Aluminium

or powder paint Connectors N (f) tri-plate DC transmission between all ports



101

91

3030

111

59 793069

LOW POWER SPLITTERS 800-2500MHz SMA Connectors, 2 & 3 Way

Multiple-Band Frequency Range, Cellular, PCS, UMTS 50Watt Average Power 20dB Isolation, Min Minimal RF Insertion Loss High Reliability SMA Female Connectors

This range of Low Power Wilkinson Splitters is designed to evenly split power cellular signals with minimal reflections or loss. The ultra wide frequency range allows use with multi-band antennas and leaky cable systems. These low cost splitters are designed for indoor applications.

Part Number Split Insertion Loss dB Max

Split Loss dB

Amp Balance, Max.

Phase Balance, Max

Weight, g

90-851022 2 0.3 3 ± 0.3dB ± 5 Degrees 200 90-851023 3 0.5 4.8 ± 0.3dB ± 5 Degrees 350

Frequency 800-2500MHz VSWR 1.25:1 Max. Average Power Rating 50W Isolation 20dB min Impedance 50 Ohm Temperature Range -35ºC to +75ºC Housing Passivated Aluminium

or powder paint Connectors SMA (f) tri-plate DC transmission between all ports



Ø 3.5

78

42

22

LOW POWER SPLITTERS 2000-4200MHz, N type Connectors, 2 Way

Multiple-Band Frequency Range 50Watt Average Power Minimal RF Insertion Loss High Reliability RoHS Compliant N type female connectors



Split Insertion Loss dB Weight, g

90-851802 2000 -4200 2



203.

00

158.00

138.00

24.00

2.00

90.0

056

.5010

1.50

14.00 14.0036.5

013

0.00

150.00

178.50

SPLITTER/COMBINERS 68-470MHz, N type Connectors, 2 Way

100Watt Average Splitting Power Minimal RF Insertion Loss High Reliability RoHS Compliant N type female connectors

The Axell Wireless series of Splitter/Combiners is designed to evenly split RF signals with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. Can also be used as combiners.


Split Insertion Loss dB Weight, g

05-009501 68 – 470 2 18dB Output >20dB

Average Power Rating Splitting 100W Combining 10W Minimum Isolation >19dB Impedance 50 Ohm Temperature Range -20ºC to +55ºC Environment IP65, RoHS compliant Housing Iridite NCP Connectors N type f



SPLITTER/COMBINERS 140-470MHz, N type or 7/16DIN Connectors, 2 Way

100Watt Average Splitting Power Minimal RF Insertion Loss High Reliability RoHS Compliant N type or 7/16DIN female connectors



Split Typical Insertion Loss dB

Connectors

Weight, g

05-005701 140 - 470 2 3.5 7/16DIN f 700 05-005702 140 - 470 2 3.5 N type f 700

05-005701 05-005702

VSWR Better than 1.3:1

Average Power Rating Splitting 100W Combining 10W Minimum Isolation >20 dB Impedance 50 Ohm Temperature Range -20ºC to +60ºC Environment IP65, RoHS compliant Housing Iridite NCP



24.0

15.0

59.0

0

44.5

89.0

SPLITTER/COMBINERS 88-2700MHz, Broadband, N type Connectors, 2 Way




Split Typical Insertion Loss dB Connectors

Weight, g

05-009802 88-960 1700-2700 2 ≤3.5 for 88-960 MHz

≤4.6 for 1700-2700 MHz N type f 800

Return Loss ≥13dB

Average Power Rating Splitting 100W Combining 10W

Minimum Isolation ≥15dB 150-960MHz; ≥16dB 1700-2700MHz Impedance 50 Ohm Temperature Range -20ºC to +55ºC Environment IP65, RoHS compliant Housing Iridite NCP



169.00

149.

00

26.00

153.00

4 MOUNTING HOLES 5.00 DIA.

159.00

70.0

0

SPLITTER/COMBINERS 140/470MHz, N type Connectors, 4 Way




Split Typical Insertion Loss dB

Connectors

05-009301 140 -470 4 6 ± 1 N type f

Return Loss >17dB all ports

Average Power Rating Splitting 100W Combining 10W Typical Isolation 20dB Impedance 50 Ohm Temperature Range -20ºC to +60ºC Environment IP65, RoHS compliant Housing Iridite NCP



25 60.8

25 60.8

25 60.8

MULTI-BAND LOW LOSS REACTIVE POWER SPLITTERS 1700-2500MHz, N type Connectors, 2, 3 & 4 Way

Multiple-Band Frequency Range 300Watt Average Power Low Insertion Loss High Reliability Environment IP65 N type female connectors

The Axell Wireless series of High Power Splitters are designed to evenly split power cellular signals with minimal reflection and loss; the design employs no resistors eliminating their contribution to PIM. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole The wide frequency range allows use with multiple-band antennas and leaky cable systems and wireless base stations.

Part Number Frequency Band, MHz Split Split Loss, dB

Weight, g

90-851702 1700 - 2500 2 3 210 90-851703 1700 - 2500 3 4.8 245 90-851704 1700 - 2500 4 6 265

Maximum VSWR 1.2:1 Maximum Insertion Loss 0.1dB Average Power Rating 300W; 1.5kW peak PIM, Passive IM -150dBc, 2x43dBm Input Impedance 50 Ohm Temperature Range -35ºC to +75ºC Environment IP65, RoHS compliant Connectors N(f), Silver or tri-plate Housing Passivated Aluminium

or powder paint DC transmission Between all ports



25 60.8

25 60.8

205.3235.6

25 60.8

25

90-851503


Multiple-Band Frequency Range, Cellular, PCS, UMTS 300Watt Average Power Low Insertion Loss High Reliability Environment IP65 N type female connectors



Weight, g

90-851502 800 - 2500 2 3 380 90-851503 800 - 2500 3 4.8 440 90-851504 800 - 2500 4 6 470

Maximum VSWR 1.2:1 Maximum Insertion Loss 0.1dB Average Power Rating 300W; 1.5kW peak PIM, Passive IM -150dBc, 2x43dBm Input Impedance 50 Ohm Temperature Range -35ºC to +75ºC Environment IP65, RoHS compliant Connectors N (f), Silver or tri-plate Housing Passivated Aluminium




8238

8238

204229.8

82

38

90-851512 38

MULTI-BAND LOW LOSS REACTIVE POWER SPLITTERS 800-2500MHz, 7/16 DIN Connectors, 2, 3 & 4 Way

Multiple-Band Frequency Range, Cellular, PCS, UMTS 700Watt Average Power Low Insertion Loss High Reliability Environment IP65 7/16 DIN female connectors



Weight, g

90-851512 800 - 2500 2 3 1040 90-851513 800 - 2500 3 4.8 1240 90-851514 800 - 2500 4 6 1350

Maximum VSWR 1.2:1 Maximum Insertion Loss 0.1dB Average Power Rating 700W; 1.5kW peak PIM, Passive IM -150dBc, 2x43dBm Input Impedance 50 Ohm Temperature Range -35ºC to +75ºC Environment IP65, RoHS compliant Connectors 7/16 DIN(f), Silver or tri-plate Housing Passivated Aluminium or

powder paint DC transmission Between all ports



195.9210.4

25 60.8

25

90-851602

25 60.8

25 60.8


Super Wideband Frequency Range, Cellular, PCS, UMTS & WiFi 500Watt Average Power Low Insertion Loss High Reliability Environment IP65 N type female connectors

This super wideband range of Axell Wireless High Power Splitters are designed to evenly split power cellular signals with minimal reflection and loss; the design employs no resistors eliminating their contribution to PIM. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The ultra wide frequency range allows use with multiple-band antennas and leaky cable systems and wireless base stations.

Part Number VSWR Split Split Loss, dB

Weight, g

90-851602



25 61

25

294

264

25 61

25

294

264

283

269

25 61

25

90-859002

90-859003

90-859004

MULTI-BAND LOW LOSS REACTIVE POWER SPLITTERS 380-2700MHz N type Connectors, 2, 3 & 4 Way

Super Wideband Band Frequency Range 300Watt Power Rating Low Insertion Loss High Reliability Environment IP65 N-female Connectors

These super wideband High Power Splitter are designed to evenly split power cellular signals with minimal reflections or loss. Its reactive design employs no resistors eliminating their contribution to PIM. Designed with only screw joints and an air dielectric, the PIM and loss has been minimized and reliability enhanced. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The ultra wide frequency range allows use with multiple-band antennas and leaky cable systems and wireless base stations.

Part Number VSWR Split Split Loss, dB Dissipative Loss Weight, g 90-859002



25 61

DUAL-BAND LOW LOSS REACTIVE POWER SPLITTERS 300-960MHz N type Connectors, 2 Way

Dual-Band Frequency Range, TETRA & Cellular 300Watt Average Power Low Insertion Loss High Reliability Environment IP65 N-female Connectors

These two-way High Powers Splitters are designed to evenly split power cellular signals with minimal reflection and loss; the design employs no resistors eliminating their contribution to PIM. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The wide frequency range covering 300 - 960MHz allows use with multiple-band antennas and leaky cable systems.

Part Number Frequency Band, MHz Split Split Loss, dB Weight, g 90-851902 300-960 2 3 380

Maximum VSWR 1.35:1 Maximum Insertion Loss 0.1dB Average Power Rating 300W; 1.5kW peak PIM, Passive IM -150dBc, 2x43dBm Input Impedance 50 Ohm Temperature Range -35ºC to +75ºC Environment IP65, RoHS compliant Connectors N (f), Silver or tri-plate Housing Passivated Aluminium




8238

DUAL-BAND LOW LOSS REACTIVE POWER SPLITTERS 300-960MHz, 7/16 DIN Connectors, 2 Way

Dual-Band Frequency Range, TETRA & Cellular 700Watt Average Power Low Insertion Loss High Reliability Environment IP65 7/16 DIN-female Connectors

These two-way High Powers Splitters are designed to evenly split power cellular signals with minimal reflection and loss; the design employs no resistors eliminating their contribution to PIM. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The wide frequency range covering 300 - 960MHz allows use with multiple-band antennas and leaky cable systems.

Part Number Frequency Band, MHz Split Split Loss, dB Weight, g 90-851912 300-960 2 3 1100

Maximum VSWR 1.35:1 Maximum Insertion Loss 0.1dB Average Power Rating 700W; 1.5kW peak PIM, Passive IM -150dBc, 2x43dBm Input Impedance 50 Ohm Temperature Range -35ºC to +75ºC Environment IP65, RoHS compliant Connectors 7/16 DIN (f), tri-plate Housing Passivated Aluminium




5068

DIRECTIONAL COUPLERS 120-240MHz, 6 & 10dB, N type Connectors

Low Loss Stripline Couplers 200Watt Average Main Line Power 20dB Isolation, Min Minimal RF Insertion Loss High Reliability Environment IP65 N type female connectors

Axell Wireless series of Directional Couplers utilizes a stripline design for indoor and outdoor applications. Units couple off a defined fraction of signal with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number Frequency

Band, MHz Coupling,

dB Mainline Loss,

dB Max. Insertion Loss,

dB Max. Reflected Power,

W Max. Weight,

g 90-852506 120 - 240 -6±1.0 1.7 0.20 40 430 90-852510 120 - 240 -10±1.0 0.8 0.20 100 430

90-852506 & 90-852510

VSWR 1.20:1 Max., All Ports Minimum Isolation 20dB Average Power Rating 200W; 1.5kW peak Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or

powder paint Connectors N (f), tri-plate DC transmission Between input and output only



3754

.8

DIRECTIONAL COUPLERS 300-500MHz, 6 to 30dB, N type Connectors

Low Loss Stripline Couplers 200Watt Average Main Line Power 20dB Isolation, Min Minimal RF Insertion Loss High Reliability Environment IP65 N type female connectors


Band, MHz Coupling,

dB Mainline Loss,

dB Max. Insertion Loss,

dB Max. Reflected Power,

W Max. Weight,

g 90-852306 300 - 500 -6±1.0 1.7 0.20 40 440 90-852310 300 - 500 -10±1.0 0.8 0.20 100 440 90-852315 300 - 500 -15±1.0 0.4 0.20 200 440 90-852320 300 - 500 -20±1.0 0.22 0.20 200 440 90-852330 300 - 500 -30±1.0 0.20 0.20 200 440

90-8523xx, typical outline

VSWR 1.20:1 Max., All Ports Minimum Isolation 20dB Average Power Rating 200W; 1.5kW peak Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or




31

49

26

3553

30


Low Loss Stripline Couplers 200Watt Average Main Line Power Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65 N type female connectors


Band, MHz Coupling,

dB Mainline

Loss, dB Max.

Insertion Loss,

dB Max.

Typical Output

Isolation

Reflected Power, W Max.

Weight, g

90-852406 300 - 960 -6±1.0 1.7 0.25 26dB, 40 400 90-852410 300 - 960 -10±1.0 0.8 0.25 30dB 100 400 90-852415 300 - 960 -15±1.0 0.6 0.20 30dB 200 400 90-852420 300 - 960 -20±1.0 0.5 0.20 30dB 200 400 90-852430 300 - 960 -30±1.0 0.4 0.20 30dB 200 440

90-852406/10/15/20 90-852430

VSWR 1.20:1 Max., All Ports Average Power Rating 200W; 1.5kW peak PIM, Passive IM -140dBc, 2x43dBm Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or




3754

.8

3754

.8


Low Loss Stripline Couplers Multiple-Band Frequency Range, Cellular, PCS, UMTS 200Watt Average Main Line Power 20dB Directivity, Min Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65


Band, MHz Coupling,

dB Mainline Loss

dB Max. Insertion Loss

dB Max. Reflected

Power W Max.

Weight g

90-852005 800 - 2500 -5±0.8 2.3 0.25 30 300 90-852006 800 - 2500 -6±0.8 1.7 0.25 40 300 90-852007 800 - 2500 -7±0.8 1.5 0.25 50 300 90-852008 800 - 2500 -8±0.8 1.2 0.25 70 300 90-852010 800 - 2500 -10±1.0 0.8 0.20 100 300 90-852013 800 - 2500 -13±1.0 0.5 0.20 200 300 90-852015 800 - 2500 -15±1.0 0.4 0.20 200 300 90-852020 800 - 2500 -20±1.0 0.22 0.20 200 300 90-852025 800 - 2500 -25±1.0 0.20 0.20 200 350 90-852030 800 - 2500 -30±1.0 0.20 0.20 200 350

90-8520xx typical outline 25 &30dB version typical outline

VSWR 1.20:1 Max., All Ports Directivity 20dB Min. Average Power Rating 200W; 1.5kW peak PIM, Passive IM -140dBc, 2x43dBm

< -150dBc to special order Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or




65.7

4435.6 6

5.7

4435.6

DIRECTIONAL COUPLERS 800-2500MHz, 5 to 30dB, 7/16 DIN Connectors

Low Loss Stripline Couplers Multiple-Band Frequency Range, Cellular, PCS, UMTS 200Watt Average Main Line Power 20dB Directivity, Min Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65


Band, MHz Coupling,

dB Mainline Loss dB

Max.

Insertion Loss dB Max.

Reflected Power W Max.

Weight g

90-852105 800 - 2500 -5±0.8 2.3 0.25 30 720 90-852106 800 - 2500 -6±0.8 1.7 0.25 40 720 90-852107 800 - 2500 -7±0.8 1.5 0.25 50 720 90-852108 800 - 2500 -8±0.8 1.2 0.25 70 720 90-852110 800 - 2500 -10±1.0 0.8 0.20 100 720 90-852113 800 - 2500 -13±1.0 0.5 0.20 200 720 90-852115 800 - 2500 -15±1.0 0.4 0.20 200 720 90-852120 800 - 2500 -20±1.0 0.22 0.20 200 720 90-852125 800 - 2500 -25±1.0 0.20 0.20 200 850 90-852130 800 - 2500 -30±1.0 0.20 0.20 200 850

90-8521xx typical outline 25 &30dB version typical outline

VSWR 1.20:1 Max., All Ports Directivity 20dB Min. Average Power Rating 200W; 1.5kW peak PIM, Passive IM -140dBc, 2x43dBm


powder paint Connectors 7/16 DIN tri-plate DC transmission Between input and output only



3754

.8


Low Loss Stripline Couplers Multiple-Band Frequency Range, Cellular, PCS, UMTS 200Watt Average Main Line Power 20dB Directivity, Min Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65 N type female connectors


Band, MHz Coupling,

dB Mainline Loss

dB Max. Insertion Loss dB

Max. Reflected

Power W Max.

Weight g

90-852205 700 - 2700 -5±0.8 2.3 0.25 30 300 90-852206 700 - 2700 -6±0.8 1.7 0.25 40 300 90-852207 700 - 2700 -7±0.8 1.5 0.25 50 300 90-852208 700 - 2700 -8±0.8 1.2 0.25 70 300 90-852210 700 - 2700 -10±1.0 0.8 0.20 100 300 90-852213 700 - 2700 -13±1.0 0.5 0.20 200 300 90-852215 700 - 2700 -15±1.0 0.4 0.20 200 300 90-852220 700 - 2700 -20±1.0 0.22 0.20 200 300

90-8522xx typical outline

VSWR 1.25:1 Max., All Ports Directivity 20dB Min. Average Power Rating 200W; 1.5kW peak PIM, Passive IM -140dBc, 2x43dBm Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or




58.3

40.5

DIRECTIONAL COUPLERS 700-2700MHz, 20 & 30dB Tap

Low Loss Stripline Couplers Multiple-Band Frequency Range, Cellular, PCS, UMTS 200Watt Average Main Line Power Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65

These Directional Couplers are used for indoor/outdoor applications covering all the wireless services from 800 to 2500MHz. Units couple off a defined fraction of signal with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number Frequency

Band, MHz Coupling,

dB Mainline Loss

dB Max. Insertion Loss

dB Max. Reflected Power

W Max. Weight

g 90-852620 700 - 2700 -20±1.0 0.22 0.20 200 750 90-852630 700 - 2700 -30±1.0 0.20 0.20 200 750

Typical outline, 20dB and 30dB versions

VSWR 1.25:1 Max., All Ports Isolation 20dB Min. Average Power Rating 200W; 1.5kW peak PIM, 3rd IMD -140dBc@2x43dBm Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Interface Input 7/16 DIN Female

Output 7/16 DIN Female Coupling N Female

Environment IP65, RoHS compliant Housing Passivated Aluminium

or powder paint Connectors Tri-plate DC transmission Between input and output only



154

180

144

Ø 4.6

23

DIRECTIONAL COUPLERS 380-2700MHz, 6, 10, 15, 20 & 30dB Tap

Low-Loss Stripline Coupler 200Watt Average Main Line Power Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65 N or 7/16 DIN Female Connectors

This series of Directional Couplers is a stripline design for indoor/outdoor applications covering all the wireless services from 380 to 2700MHz. Units couple off a defined fraction of signal with minimal reflections or loss. All of them conform IP65 specification. Its mechanical shape allows to be fixed on the wall or the pole easily. The ultra wide frequency range allows use with multi-band antennas and leaky cable systems and wireless base stations Part Number Coupling,

dB Insertion Loss

dB Max. Isolation dB Reflected Power

W Max. Weight g Connectors

90-952706 6 ±1.0 1.8 20dB 40 390 90-952710 10 ±1.0 0.9 20dB 100 390 90-952715 15 ±1.0 0.4 20dB 200 390 90-952720 20 ±1.0 0.3 20dB 200 390 90-952730 30 ±1.5 0.2 30dB 200 390

N (f), tri-plate

90-852906 6 ±1.0 1.8 20dB 40 890 90-852910 10 ±1.0 0.9 20dB 100 890 90-852915 15 ±1.0 0.4 20dB 200 890 90-852920 20 ±1.0 0.3 20dB 200 890 90-852930 30 ±1.5 0.2 30dB 200 890

7/16 DIN tri-plate

Typical outline, 90-9527xx Typical outline, 90-95xxxx

Frequency Band, MHz 380 - 2700MHz VSWR 1.3:1 Max., All Ports Power Rating 200W, avg.; 1.5KW peak PIM, Passive IM -140dBc, 2x43dBm Impedance 50 ohm, nominal Operating Temperature Range -25º to +75ºC Environment: IP65, RoHS compliant

Housing Passivated Aluminium or powder paint DC capability: DC transmission only between input and output



DIRECTIONAL COUPLERS 140/470MHz, 6 & 10dB Tap

Low-Loss Stripline Coupler 100W Average Main Line Power Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65 7/16DIN Female Connectors


Band, MHz Coupling,

dB Power Rating

W Max. Insertion Loss

dB Max. VSWR Weight

kg 07-010401 100 - 470 6 ±1.0 100 1.6 Better than 1.3:1 1.5 07-010402 100 - 470 10±1.0 100 0.8 Better than 1.3:1 1.5


Impedance 50 Ohms Connectors 7/16 DIN Female Operating Temperature Range -20°C to +55°C Operating Humidity Range 0 to 95% non-condensing Environmental IP65 Mechanical Wall mount Finish Iridite NCP MTBF >180000 hours



DIRECTIONAL COUPLERS 140/470MHz, 10 & 30dB Tap

Low-Loss Stripline Coupler 100W Average Main Line Power Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65 N Female Connectors

Axell Wireless series of Directional Couplers utilizes a stripline design for indoor and outdoor applications. Units couple off a defined fraction of signal with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number Frequency Band,

MHz Coupling, dB Power Rating

W Max. Insertion Loss dB

Typical. VSWR Weight

kg 07-010902 100 - 470 10±0.5 100 0.7 1.3:1 0.8 07-010905 100 - 470 30±0.5 100 0.3 1.3:1 0.8


Impedance 50 Ohms Connectors ‘N’ female Operating Temperature Range -20 to +60°C Operating Humidity Range 0 to 95% non-condensing Environmental IP65 Mechanical Wall mount Finish Iridite NCP MTBF >180000 hours



27.0

0

35.0

057

.00

24.0

0

DIRECTIONAL COUPLERS 150/2200MHz, 6, 10, 15, 20 & 30dB Tap






kg 07-014002 150 - 2200 6 +2/-1 100 ≤ 2.1 1.3:1 0.8 07-014001 150 - 2200 10 ± 2.5 100 ≤ 0.9 1.3:1 0.8 07-014003 150 - 2200 15 ± 1.5 100 ≤ 0.6 1.3:1 0.8 07-014004 150 - 2200 20 ±2.0 100 ≤ 0.4 1.3:1 0.8 07-014006 150 - 2200 30 ± 1.0 100 ≤ 0.3 1.3:1 0.8




52.0

89.0

104.

0

17.0

0

32.0

40.0

0

DIRECTIONAL COUPLERS 70/1000MHz, 6, 10, 15, 20 & 30dB Tap






kg 07-018001 70 - 1000 6 +2/-1 100 ≤ 2.1 1.5:1 0.8 07-018002 70 - 1000 10 ± 2.0 100 ≤ 1.2 1.3:1 0.8 07-018003 70 - 1000 15 ± 2.0 100 ≤ 1.2 1.3:1 0.8 07-018004 70 - 1000 20 ±2.0 100 ≤ 1.0 1.34:1 0.8 07-018005 70 - 1000 30 ±2.0 100 ≤ 1.0 1.34:1 0.8




50

38

87

150

23

194.2

DIRECTIONAL COUPLERS Dual Directional 30dB Coupler 824-2170MHz

500Watt Average Main Line Power Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65 DIN Female Connectors/N Tap off

The dual Directional Coupler is a airline design for indoor/outdoor applications covering all the wireless services from 824 to 2170MHz. This design offers RF power ratings of 500 watts with minimal reflections or loss. The units conform to IP65 specification and its mechanical configuration allows it to be easily fixed onto a wall or a mast or pole. This coupler is ideal for antenna power monitoring applications in base station installations.

Part Number Frequency Band MHz

Coupling, dB Insertion Loss dB

Directivity Weight g

90-852830 824 - 2170 -30 ± 0.4 @ 824-960MHz -30 ± 0.5 @ 1710-2170MHz

20dB (typical > 30 dB)

1000

Input and Output ,



51 87

3 dB HYBRID COUPLER/COMBINERS 120 to 240MHz, N type Connectors, 30dB Minimum Isolation

200Watt Average Power Rating 30dB Isolation, Min Minimal RF Insertion Loss High Reliability Environment IP65 N type female connectors

Axell Wireless series of 3dB Hybrid Couplers is designed to meet the specialized requirements of the wireless market. It can combine two channels from different service supplier to a single antenna or distribution cable. This requires the termination of one output port with a 50 Ohm load and results in a 3dB loss in each signal. In situations where two similar feeds are required, for example an in-building application, both outputs may be used, eliminating the need for a termination and the 3dB loss. All units conform to IP65 specification. These devices are suitable for use with antennas and leaky cable systems and wireless base stations.

Part Number. Frequency Range, MHz Input Isolation dB Min.


Power Rating W avg.

Weight g.

90-853006 120 - 240 30 0.2 200 700

VSWR 1.20:1 Max. All Ports Coupling 3dB, nominal Coupling Variation ±0.5dB Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or

powder paint Connectors N (f), tri-plate DC transmission Between cross ports only



35 70.6

3 dB HYBRID COUPLER/COMBINERS 300-500MHz, N type Connectors, 35dB Isolation, Minimum

200Watt Average Power Rating 35dB Isolation, Min Minimal RF Insertion Loss High Reliability Environment IP65 N type female connectors


Part Number Frequency Range, MHz Input Isolation dB Min.


Power Rating W avg.

Weight g.

90-853004 300 - 500 35 0.2 200 480

VSWR 1.20:1 Max. All Ports Coupling 3dB, nominal Coupling Variation ±0.4dB Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or

powder paint Connectors N (f), tri-plate DC transmission Between cross ports only



40 76

3 dB HYBRID COUPLER/COMBINERS 300-960MHz, N type Connectors, 23dB Minimum Isolation

120Watt Average Power Rating 23dB Isolation, Min Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65 N type female connectors




Power Rating W avg.

Weight g.

90-853005 300 - 960 23 0.2 120 610

VSWR 1.2:1 Max. All Ports Coupling 3.1dB, ±0.2dB Frequency Sensitivity ±0.3dB PIM, Passive IM -140dBc, 2x43dBm Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or

powder paint Connectors N (f), tri-plate VSWR 1.2:1 Max. All Ports DC transmission Between cross ports only



55

88

24

30 6676

Ø 4

55

9537

37 80.4

76

Ø 4

3 dB HYBRID COUPLER/COMBINERS 800-960MHz, N type or 7/16 DIN Connectors, 35dB Minimum Isolation,

200Watt Average Power Rating 35dB Isolation, Min Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65 N type or 7/16 DIN female connectors

Axell Wireless series of 3dB Hybrid Couplers is designed to meet the specialized requirements of the wireless market. It can combine two channels from different service supplier to a single antenna or distribution cable. This requires the termination of one output port with a 50 Ohm load and results in a 3dB loss in each signal. In situations where two similar feeds are required, for example an in-building application, both outputs may be used, eliminating the need for a termination and the 3dB loss. All units conform to IP65 specification. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number Frequency Range,

MHz Input Isolation

dB Min. Insertion Loss

dB Max. Power Rating W avg.

Weight g.

Connector

90-853007 800 - 960 35 0.2 200 230 N type 90-853017 800 - 960 35 0.2 200 640 7/16 DIN

90-853007 90-853017

VSWR 1.20:1 Max. All Ports Coupling 3dB, nominal Coupling Variation ±0.3dB PIM, Passive IM -140dBc, 2x43dBm Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant

Housing Passivated Aluminium or powder paint Connectors N (f) or 7/16 DIN tri-plate DC transmission Between cross ports only



40 76 47 90

MULTI-BAND HYBRID COUPLER/COMBINERS 800-2500MHz, N or 7/16 DIN Connectors, 25dB Minimum Isolation

Multiple-Band Frequency Range, Cellular, PCS, UMTS 120Watt Average Power Rating 25dB Isolation, Min Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65 N type or 7/16 DIN female connectors

Axell Wireless series of 3dB Hybrid Couplers is designed to meet the specialized requirements of the wireless market. It can combine two channels from different service supplier to a single antenna or distribution cable. This requires the termination of one output port with a 50 Ohm load and results in a 3dB loss in each signal. In situations where two similar feeds are required, for example an in-building application, both outputs may be used, eliminating the need for a termination and the 3dB loss. All units conform to IP65 specification. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number Frequency

Range, MHz Input Isolation

dB Min. Insertion Loss

dB Max. Power Rating

W avg. Weight

g. Connector

90-853001 800 - 2500 25 0.25 120 420 N type 90-853011 800 - 2500 25 0.25 120 840 7/16 DIN

90-853001 90-853011

VSWR 1.20:1 Max. All Ports Coupling 3.1±0.2dB Coupling Variation ±0.3dB PIM, Passive IM -140dBc, 2x43dBm


powder paint Connectors N (f), 7/16 DIN tri-plate DC transmission Between cross ports only



40 76

MULTI-BAND HYBRID COUPLER/COMBINERS 700-2700MHz, N type Connectors, 22dB Minimum Isolation

Ultra Wide Frequency Band 120Watt Average Power Rating 22dB Isolation, Min Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65 N type female connectors




Power Rating W avg.

Weight g.

90-853002 700 - 2700 22 0.25 120 420

VSWR 1.20:1 Max. All Ports Coupling 3.1±0.6dB PIM, Passive IM -140dBc, 2x43dBm Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or

powder paint Connectors N (f) DC transmission Between cross ports only



MULTI-BAND HYBRID COUPLER/COMBINERS 1710-2200MHz, N or 7/16 DIN Connectors, 30dB Minimum Isolation

200Watt Average Power Rating 30dB Isolation, Min Minimal RF Insertion Loss High Reliability Indoor Application N type or 7/16 DIN female connectors

Axell Wireless series of 3dB Hybrid Couplers is designed to meet the specialized requirements of the wireless market. It can combine two channels from different service supplier to a single antenna or distribution cable. This requires the termination of one output port with a 50 Ohm load and results in a 3dB loss in each signal. In situations where two similar feeds are required, for example an in-building application, both outputs may be used, eliminating the need for a termination and the 3dB loss. All units conform to IP65 specification. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number Frequency Range,

MHz Input

Isolation dB Min.


Power Rating W avg.

Weight g.

Connectors

90-853003 1710 - 2200 30 0.2 200 300 N type 90-853013 1710 - 2200 30 0.2 200 790 7/16 DIN

90-853003 90-853013

VSWR 1.15:1 Max. All Ports Coupling 3.1dB, nominal Coupling Variation ±0.3dB Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment Indoor Application Housing Passivated Aluminium or

powder paint Connectors N (f) or 7/16 DIN tri-plate DC transmission Between cross ports only



27.9

9

1.07

25.8

4

CROSSBAND COUPLERS/DIPLEXERS 500/800MHz, N or 7/16 DIN Connectors, 50dB Minimum Isolation

High isolation Low insertion loss Good VSWR Low intermodulation Sealed to IP65 as standard

The Axell Wireless range of Diplexers and crossband couplers offers a compact solution to allow the co-siting of two different frequency bands on to one common output. Designed using high performance filters - either bandpass or highpass/lowpass - these units provide excellent inter-band isolation, low insertion loss and good intermodulation performance. By using crossband couplers it is possible to reduce feeder cable requirement by 50%, thereby reducing rigging and tower rental costs, in applicable situations. Suitable for use in: Transmitter / Dual Band Networks, In-building and Common Antenna Sharing Systems.

Part Number Frequency Range,

MHz

Isolation dB Min.

Insertion Loss

dB Max.

Approx Weight g

Power Rating W cw.

Connectors

07-004810 0-500 800-2200 > 50 dB 0-500MHz

> 50 dB 800-2170MHz 0.5 580 100 N type f

07-005302 0-500 800-2200 > 50 dB 0-500MHz

> 50 dB 800-2170MHz 0.5 750 100 7/16 DIN f

07-004810 07-005302

Impedance 50 Ohm, nominal

VSWR 1.3:1 800-960 MHz 1.4:1 1710-2170 MHz Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Input ports 2 Output ports 1 MTBF typically >180,000 hours Housing Aluminium finished to RAL7035



83.0

016

.00

CROSSBAND COUPLERS/DIPLEXERS 490/650MHz, N Connectors, 40dB Minimum Isolation



Part Number Frequency Range, MHz

Isolation dB Min.

Insertion Loss

dB Max.

Approx Weight g

Power Rating W cw.

Connectors

07-019301 50-490 650-2200 > 40 dB 50-490 MHz

> 40 dB 800-2200 MHz 0.5* 500 100 N type f

*(on edge of passband)


VSWR

1.5:1 LOW 50-200 MHz 1.3:1 LOW 200-490 MHz 1.3:1 LOW 650-960 MHz 1.5:1 HIGH 1700-2200 MHz

Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Input ports 2 Output ports 1 MTBF typically >180,000 hours Housing Aluminium finished to RAL7035



CROSSBAND COUPLERS/DIPLEXERS 108/143MHz, N Connectors, Isolation >30dB


The Axell Wireless range of Diplexers and crossband couplers offers a compact solution to allow the co-siting of two different frequency bands on to one common output. Designed using high performance filters - either bandpass or highpass/lowpass - these units provide excellent inter-band isolation, low insertion loss and good intermodulation performance. By using crossband couplers it is possible to reduce feeder cable requirement by 50%, thereby reducing rigging and tower rental costs, in applicable situations. Suitable for use in: Transmitter / Dual Band Networks, In-building and Common Antenna Sharing Systems. Part Number Frequency

Range, MHz Isolation dB Min.


Approx Weight g Power Rating W cw.

Connectors

07-005716 0 - 108 143 - 500 >30dB 0.5 600 100 N type f

Impedance 50 Ohm, nominal VSWR 1.3:1 Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Input ports 2 Output ports 1 MTBF typically >180,000 hours Housing Aluminium finished to RAL7035



CROSSBAND COUPLERS/DIPLEXERS 250/380MHz, N Connectors, Isolation >30dB





Approx Weight g Power Rating W cw.

Connectors

07-005736 0 - 250 380 - 500 >50dB 0.5 600 100 N type f

Impedance 50 Ohm, nominal VSWR 1.3:1 Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Input ports 2 Output ports 1 MTBF typically >180,000 hours Housing Aluminium finished to RAL7035



23.5

40.0

20.3

63.5

3.5

80.0

0

87.0

0

CROSSBAND COUPLERS/DIPLEXERS 400/440MHz, 7/16DIN Connectors, Isolation >30dB





Approx Weight g

Power Rating W cw.

Connectors

07-005807 70 - 400 440 - 470 >30dB 1.0 * 600 50 7/16DIN f

*(on edge of passband)


VSWR 1.5:1 LOW 70 - 200MHz 1.3:1 LOW 380 - 400MHz 1.3:1 HIGH 440 - 470MHz

Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Input ports 2 Output ports 1 MTBF typically >180,000 hours Housing Aluminium finished to RAL7035



CROSSBAND COUPLERS/DIPLEXERS 1000/1700MHz, N type Connectors, Isolation >50dB



Part Number

Frequency Range, MHz

Isolation dB Min.


Approx Weight g

Power Rating W cw.

Connectors

07-004302 0-1000 1700-2200 >50dB



17.60

20.5

0

17.60

20.5

059

.50

100.00

75.0

029

.50

4x 4.50 - THRUMOUNTING HOLES

88.00

108.00

83.0

0

82.00

77.0

0

4xM3x0.5 - 6H - 8.00DEEP

16.0

0

= 83.00 =2xM3x0.5 - 6H - 8.00DEEPSAME ON OPPSITE SIDE

CO

MBI

NED

LOW

HIG

H

CROSSBAND COUPLERS/DIPLEXERS 2170/2400MHz, N type Connectors, Isolation >40dB



Part Number

Frequency Range, MHz

Isolation dB Min.

Insertion Loss dB Typical.

Approx Weight g

Power Rating W cw.

Connectors

07-015701 800 - 2170 2400 - 2500 >40dB 0.5dB 800 - 960 MHz

1.0dB 1710 - 2170 MHz 1.0dB 2400 - 2500 MHz

580 100 N type f


VSWR (Typical) 1.3:1 LOW 800-960 MHz 1.5:1 LOW 1710-2170 MHz 1.5:1 HIGH 2400-2500 MHz

Temperature Range -20 to +55°C Environment IP65, RoHS compliant Input ports 2 Output ports 1 MTBF typically >180,000 hours Housing Aluminium finished to RAL7035



THESE FIXINGS REPEATED ON OPPOSITE FACE

84.00

103.

00

41.00

20.4

0

84.00

135.00

800 - 1000 COMBINED

1710 - 2170

M3x8 FIXINGS IN 8 PLACES4 OFF FIXINGS 7.0 DIA

122.00

110.00

110.

00

98.0

0

CROSSBAND COUPLERS/DIPLEXERS 1000/1710MHz, 7/16DIN Connectors, Isolation >47dB


The Axell Wireless range of Crossband Couplers and Diplexers offer a compact solution to allow the co-siting of two different frequency bands on to one common output. Designed using high performance filters - either bandpass or highpass/lowpass - these units provide excellent inter-band isolation, low insertion loss and good intermodulation performance. By using crossband couplers it is possible to reduce feeder cable requirement by 50%, thereby reducing rigging and tower rental costs, in applicable situations. Suitable for use in: Transmitter / Dual Band Networks, In-building and Common Antenna Sharing Systems.

Part Number

Frequency Range,

MHz

Isolation dB Min.

Insertion Loss dB Typical.

Approx Weight

g

Power Rating W cw.

Connectors

80-030407 800 - 1000

1710 - 2170

>47dB



2 OUTPUT 1

4 OUTPUT 3

4 INP

UT 3

2

I

NP

UT

1

Ø 5

DCB

DCB A

E

NETWORK COMBINERS 4X4 Hybrid Matrix Combiner/Splitter, 800-2200MHz, N type or 7/16 DIN Connectors

Connects 4 input to 4 output for shared systems High Isolation, low VSWR High Average power rating Low PIM High reliability N type or 7/16 DIN female connectors

The Hybrid Matrix Combiner/Splitter is a matrix of four 3dB hybrid couplers. Signals applied to any of the four input ports will be split equally between the four output ports. Multiple signals in the same band can be combined to a common feeder cable, as may be required in a shared, in-building distributed antenna system. Unused ports must be terminated externally with a 50 Ohm load. The hybrid provides excellent isolation in the specified band and minimizes passive intermodulation (PIM). All units are sealed for outside applications and conform to IP65 specification.

Input Power per port, Watts

Part Number Frequency Range, MHz

Coupling dB

Isolation dB

Input VSWR

avg. Peak

Weight kg

Connectors

90-853101 800 - 2200 6.2±0.5 >25 25



2562

.6

2562

.6

MULTI-BAND LOW LOSS POWER TAPS 800-2500MHz, N type Connectors, 30dB Minimum Isolation,

Multiple-Band Frequency Range, Cellular, PCS, UMTS 200Watt Average Power Rating Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65 N type female connectors

Axell Wireless series of power taps is used to unevenly split high power cellular signals from 5dB to 40dB. The design is optimized to produce minimal reflections or loss and to minimize PIM and increase reliability over the whole 800-2500MHz band. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole The ultra wide frequency range allows use with multi-band antennas, leaky cable systems and wireless base stations.

Part Number Frequency Range, MHz Tap Loss, dB Input←→P2

Tap Loss, dB Input←→P1

VSWR Max. Weight g.

90-854005 800 - 2500 -5 ± 0.8 -1.65 ± 0.5 1.35:1 370 90-854006 800 - 2500 -6 ± 0.8 -1.26 ± 0.4 1.35:1 370 90-854007 800 - 2500 -7 ± 0.8 -1 ± 0.3 1.35:1 370 90-854010 800 - 2500 -10 ± 1.0 -0.46 ± 0.3 1.35:1 370 90-854015 800 - 2500 -15 ± 1.2 -0.2 ± 0.2 1.35:1 370 90-854020 800 - 2500 -20 ± 1.5 -0.1 ± 0.1 1.15:1 180 90-854025 800 - 2500 -25 ± 1.5 -0.1 ± 0.1 1.15:1 180 90-854030 800 - 2500 -30 ± 1.5 -0.1 ± 0.1 1.15:1 180 90-854040 800 - 2500 -40 ± 1.5 -0.1 ± 0.1 1.15:1 180

5dB to 15dB outline 20dB to 40dB outline

Frequency Range 800-2500 MHz Power Rating 200W, avg. 1.5kW peak PIM, Passive IM -150dBc, 2x43dBm Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or

powder paint Connectors N (f), tri-plate DC transmission Between input and port P1 only

(P2 is coupled capacitively)



2562

.6

2562

.6

MULTI-BAND LOW LOSS POWER TAPS Unequal Power Splitters, 700-2700MHz, N type Connectors

Multiple-Band Frequency Range, Cellular, PCS, UMTS & WiFi 200Watt Average Power Rating Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65 N type Female connectors

Axell Wireless series of power taps is used to unevenly split high power cellular signals from 5dB to 40dB. The design is optimized to produce minimal reflections or loss and to minimize PIM and increase reliability over the whole 800-2500MHz band. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The ultra wide frequency range allows use with multi-band antennas, leaky cable systems and wireless base stations.

Part Number Tap Loss, dB Input←→P2

Tap Loss, dB Input←→P1

Typical

VSWR Max. Weight g.

90-854106 -6±0.8 @ 800 - 2500MHz -6±1.2 @ 700 - 2700MHz

-1.26 1.35:1 370

90-854110 -10±1.0 @ 800 - 2500MHz -10±1.2 @ 800 - 2500MHz

-0.5 1.35:1 370

90-854115 -15±1 -0.2 1.35:1 370 90-854120 -20±1.5 -0.1 1.15:1 180 90-854130 -30±1.5 -0.1 1.15:1 180 90-854140 -40±1.5 -0.1 1.15:1 180

6dB to 15dB outline 20dB to 40dB outline

Frequency Range 700-2700 MHz Power Rating 200W, avg. 1.5kW peak PIM, Passive IM -150dBc, 2x43dBm Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or powder paint Connectors N (f), tri-plate DC transmission Between input and port P1 only

(P2 is coupled capacitively)



LOW & MEDIUM POWER LOAD TERMINATIONS DC-3000MHz, 50 Ohms

Resistive Film Load Finned Termination Ideal for Wireless Communication Powers 2W to 50W Maximum VSWR 1.15:1 High Reliability

Axell Wireless 90-855xxx series of 50 Ohm terminations are low and medium power coaxial loads, which operate from DC to 3GHz. Cooling fins minimize temperature rise of the resistive film terminating element, contained within a carefully matched housing. Standard connectors are N Type and 7/16 DIN, male or female. Part Number Connector Type Connector

Gender Power Rating

Weight (g) Length, (mm)

Cross Section (mm)

90-855021 N type Male 2W 52 40 20 90-855051 N type Male 5W 55 53 20 90-855101 N type Male 10W 130 54 35 90-855102 N type Female 10W 130 54 35 90-855103 7/16 DIN Male 10W 190 67 35 90-855104 7/16 DIN Female 10W 190 65 35 90-855201 N type Male 20W 160 82 35 90-855202 N type Female 20W 160 82 35 90-855203 7/16 DIN Male 20W 210 88 35 90-855204 7/16 DIN Female 20W 210 86 35 90-855301 N type Male 30W 270 137 40 90-855302 N type Female 30W 270 136 40 90-855303 7/16 DIN Male 30W 330 140 40 90-855304 7/16 DIN Female 30W 330 138 40 90-855501 N type Male 50W 390 137 50 90-855502 N type Female 50W 390 136 50 90-855503 7/16 DIN Male 50W 450 140 50 90-855504 7/16 DIN Female 50W 450 138 50

Impedance 50 Ohm, nominal Frequency Range DC - 3GHz Maximum VSWR 1.15:1 Peak power 2 kW Temperature Range -35ºC to +125ºC

Inner Layer Silver Plate Connectors Outer Layer Tri-plate Housing Anodized Aluminium



100

100

110

100

167

185

100

HIGH POWER LOAD TERMINATIONS DC-3000MHz, 50 Ohms, 100Watt

Resistive Film Load Finned Termination Ideal for Wireless Apps 100Watt Maximum VSWR 1.25:1 High Reliability

Axell Wireless 90-856xxx series of 50 Ohm terminations are high power coaxial loads, which operate from DC to 3GHz. Cooling fins minimize temperature rise of the resistive film terminating element, contained within a carefully matched housing. Standard connectors are N Type and 7/16 DIN, male or female.

Part Number Frequency Range, GHz Connector Type Power Rating Weight (g) 90-856001 DC - 3GHz N type Male 100W 1780 90-856002 DC - 3GHz N type Female 100W 1780 90-856003 DC - 3GHz 7/16 DIN Male 100W 186

Date post:	30-Jan-2021
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

PASSIVE EQUIPMENT CATALOGUE 9 (A4) · 2014. 6. 26. · The Axell Wireless series of Low Power...

Documents