Healthcare Lighting • 3 Kilmer Road • Edison, NJ 08817 • 855.868.6980 • f 855.868.6981 • www.healthcare-lighting.com
Inter ior Pat ient Room Wal l L ight ARCHER LED
© 2013 Acuity Brands Lighting, Inc. All Rights Reserved. “Healthcare Lighting”, “Archer” are registered trademarks of Acuity Brands Lighting. Products herein may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice. Five-year limited warranty. Complete warranty terms located at: www.AcuityBrands.com/CustomerResources/Terms_and_Conditions.aspx
Patient Room Wall LightArcher LED
SPECIFICATIONS
Healthcare Lighting • 3 Kilmer Road • Edison, NJ 08817 • 855.868.6980 • f 855.868.6981 • www.healthcare-lighting.com© 2013 Acuity Brands Lighting, Inc. All Rights Reserved. “Healthcare Lighting”, “Archer” are registered trademarks of Acuity Brands Lighting. Products herein may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice. Five-year limited warranty. Complete warranty terms located at: www.AcuityBrands.com/CustomerResources/Terms_and_Conditions.aspx
Patient Room Wal l L ight ARCHER LEDInter ior
Patient Room Wall LightArcher LED
The Archer LED bed light provides versatility with optional sequential switching for patient room ambient and task lighting. Multiple lamping and switching options allow this fixture to be used in a wide array of applications. As a bed light, placement above the patient on the headwall delivers optimal distribution of light for reading and also comfortable ambient illumination. If a low voltage controller is included (optional), light levels can be adjusted via the nurse call system or using a separate pendant pillow switch (optional).
ConstructionExtruded Aluminum HousingHigh impact acrylic lens, UV treated, with frosted diffuse coating.
SourceNichia LED chips (or equivalent) mounted on linear boards.
DriverRoal Strato RSL035-09 or equivalent driver.
FinishPolymer powder coat flat white finish; anti-microbial finish (optional)
Weight38 lbs (3ft); 50 lbs (4ft)
ValidationCSA Certified Damp Location (Canada, US)
VoltageMulti-volt 120-277V
Input Watts125 watts (top and bottom mode 2u2d configuration 4ft fixture)63 watts (top mode 2u2d configuration 4ft fixture)
Light Output9000 lumens (top and bottom mode 2u2d configuration 4ft fixture)4600 lumens (top mode 2u2d configuration 4ft fixture)
Dimming0-10V dimming standard
Color Quality>80 CRI
Life Estimate40,000 hours*
*LED life projection based on IES TM-21 and IES LM-80
WarrantyFive-year standard LED warranty, terms and conditions apply. (see www.healthcare-lighting.com)
4-1/4”
6-7/8”
AND SECURED/BLOCKING BY CONTRACTOR)