Pavement Design, Evaluation, Management and
Rehabilitation Course
Pag
e1
________________________________________________________________________________________ CTEP (Centre for Transportation Engineering & Planning) is a leader in providing professional development training and supporting applied research in the areas of transportation engineering and planning. In this role, CTEP provides a forum for dialogue, collaboration and technology transfer among stakeholders in the transportation engineering community in Canada. Our website is: www.ctep.ca CTEP is pleased to offer a short course, “Pavement Design, Evaluation, Management and Rehabilitation” ________________________________________________________________________________________________
This course provides an introduction to the design, evaluation, management, construction and preservation of pavements. The American Association of State Highway and Transportation Officials (AASHTO) 1993 pavement design procedure, as used by many agencies in Canada is covered along with an introduction to the AASHTOWare Pavement ME mechanistic-empirical method. The primary design, specification and construction factors that contribute to the long-term functional and structural performance of pavements ranging from parking lots to municipal roadways, airports and major highways are discussed. The course will focus on flexible pavements (asphalt concrete and surface treatment) but will also cover rigid (concrete) and permeable (asphalt, concrete and paving stone) sections. Once a pavement is constructed, it is desirable to maximize its life through timely and cost effective maintenance and rehabilitation. This course provides details on methods and means to evaluate both the functional (distress, friction, smoothness) and structural (load bearing capacity) of the pavement. Commonly used surface distress evaluation procedures are outlined along with the methods and equipment used to determine friction, smoothness and load/deflection capabilities. This information is then used in a pavement or asset management system to assist in determining when and where to initiate maintenance and rehabilitation activities. An introduction to common pavement maintenance procedures (crack sealing, patching, concrete repairs, etc.) is provided along with more significant rehabilitation procedures such as hot and cold in-place recycling, overlays, etc. Through a series of case studies, positive and negative features are presented to give the participant a good understanding of what we can do better to ensure the cost-effective use of transportation investments.
Who Should Attend?
Engineers and technicians involved in the design, evaluation and management of pavements
Provincial and municipal engineers, technicians and other practitioners
Transportation infrastructure managers
Contractors and others responsible for maintaining pavement assets
Learning Objectives: The learning objectives for this course include:
Being able to recognize and use current common pavement design procedures.
Understanding common design and construction features important to the performance of both asphalt and concrete pavements.
The ability to design and recognize specification and construction activities that can improve the performance of pavements.
Evaluating the condition of pavements through surface condition surveys, smoothness, friction, load/deflection and other evaluation techniques.
Pavement Design, Evaluation, Management and
Rehabilitation Course
Pag
e2
__________________________________________________________________________________
Understanding the basic components of pavement management systems and how they can be used to optimize funding expenditures.
Communicating and promoting good road design and construction practices.
Course Benefits:
Understand key components and factors necessary for the cost-effective design of flexible and rigid pavements.
Be able to identify design and construction features that may negatively impact the performance of pavements.
Specify or utilize common pavement condition evaluation procedures to determine when and where to invest in maintenance and rehabilitation activities to maximize the life of a pavement.
Assist in developing specifications to ensure the performance of pavements.
Course Instructor: David K. Hein, P.Eng.
Mr. Hein has been involved in the design and construction of pavements ranging from parking areas to major highways and airport runways over the past 35 years.
He is the past chair of the Transportation Association of Canada (TAC) Pavements Standing Committee, World Road Association Flexible Pavements Committee and is currently Represents Canada on the Asset Management Committee.
David has led or significantly contributed to the TAC Pavement Design and Asset Management Guide, Synthesis of Asset Management Practices for Canada and Synthesis of Best Practices for the Repair of Potholes and has completed training courses for over 10,000 participants across North America.
________________________________________________________________________________
Pavement Design, Evaluation, Management and
Rehabilitation Course
Pag
e3
Course Outline Day 1 8:30 – 8:45 Introductions and Course Overview 8:45 – 9:15 New Pavement Design
Traffic data analysis
Pavement materials and subgrade
AASHTO 1993 pavement design
Mechanistic/Empirical design 9:15 – 10:15 Evaluation of Existing Pavements
Difference between maintenance and rehabilitation
Pavement condition evaluation techniques o Manual o Semi-automated o Automated
Distress evaluations (flexible, rigid, surface treatment and gravel)
Pavement structural capacity evaluation
o Benkelman Beam o Dynaflect o Road Rater o Falling Weight Deflectometer o Rolling Wheel and Travelling Speed Deflectometers
10:15 – 10:30 Coffee break 10:30 – 11:00 Evaluation of Existing Pavements (Continued)
Ground penetrating radar
Magnetic imaging thermography 11:00 – 11:30 Smoothness and Surface Friction Testing Equipment
Analysis techniques 11:30 – 12:00 Pavement Condition Data Analysis
Priority planning and programming
Maintenance and rehabilitation option
How to determine feasible rehabilitation options 12:00 – 1:00 Lunch 1:00 – 2:30 Analysis of Economic and Non-Economic Factors for Rehabilitation Planning
Deterministic Life-Cycle Costing
Probabilistic Life-Cycle Costing 2:30 – 3:00 Pavement Management
Data needs
Evaluation techniques
Popular pavement management software
Pavement Design, Evaluation, Management and
Rehabilitation Course
Pag
e4
3:00 – 3:15 Coffee break 3:15 – 4:15 Permeable Pavement Design 4:15 – 4:30 Questions and Day 1 Wrap up ______________________________________________________________________________________
DAY 2 8:00 – 8:15 Review and Overview of Day 2 Learning Objectives 8:15 – 8:45 Planning and Executing a Pavement Preservation Program
What is pavement preservation
How to evaluate its effectiveness 8:45 – 9:15 Crack Sealing
Selection of appropriate pavements for crack sealing
Crack sealing techniques 9:15 – 9:30 Patching
Flexible and rigid pavement localized repairs 9:45 – 10:00 Coffee break 10:00 – 11:00 Surface Treatments
Selecting the appropriate treatment for the right pavement
Overview of common treatments used throughout Canada
High friction surfaces 11:00 – 12:00 Plant and In-Place Pavement Recycling Techniques
Commonly use techniques
Keys for successful performance 12:00 – 1:00 Lunch 1:00 – 2:00 Plant and In-Place Pavement Recycling Techniques (Continued) 2:00 – 2:15 Coffee Break 2:15 – 3:00 Sidewalks and Recreational Trails
Design
Construction
Management 3:00 – 4:15 Case Studies
Examples and discussion on the impact of pavement design and construction activities and future pavement maintenance and rehabilitation
4:15-4:30 Questions and Closing remarks
Pavement Design, Evaluation, Management and
Rehabilitation Course
Pag
e5
______________________________________________________________
REGISTRATION
Pavement Design, Evaluation, Management and Rehabilitation Course March 3 & 4, 2020 (8:00 AM – 4:30 PM)
Four Points by Sheraton Edmonton South
7230 Argyll Road, Edmonton, Alberta T6C 4A6 Ph. 780-465-7931
Name(s): _____________________________________________________________________
Organization: _________________________________________________________________
Address: _____________________________________________________________________
City/Province: _____________________________________Postal Code: _______________
Phone: _________________________ Email: ______________________________________
COURSE FEES per person (GST Exempt)
CTEP Members: $995.00 Non Members: $1,295.00
Course fees, (GST Exempt), include classroom materials, lunches & refreshments
Payment is due and payable with your registration; early registration is encouraged.
The registration/cancellation deadline is February 28, 2020 (There will be no refunds thereafter; substitutions are of course permitted.)
Payment via: VISA/MasterCard Cheque Amount: $ _____________
Visa or MasterCard: email this registration form to [email protected] Phone: 403-607-4482
Credit Card Number: _____________________________________________________ Print name as it appears on the card: ________________________________________ Expiry month/year: ______________________________________________________ Signature: ____________________________________________________________ By Cheque: payable to “CTEP” and remit, along with this registration form to: () 422-20
CTEP (Centre for Transportation Engineering & Planning)
c/o Stantec, Transportation
200, 325 – 25 Street SE
Calgary, AB T2A 7H8 Attn: Neil Little
www.ctep.ca