CORPORATE • 6690 JONES MILL COURT • BUILDINGS A&B • NORCROSS, GEORGIA 30092 USAPHONE: (770) 441-5900 • FAX (770) 409-7240 OR 7259
e-mail: [email protected] • web page www.american-niagara.com
American Niagara Tee Squares
2009SCREEN PRINT SUPPLY
CATALOG
1-800-241-7708
DUBUITINKS
M U R A K A M I
TERMS AND CONDITIONSUPS SHIPMENTS: Orders to be shipped that are processed before 2:30 p.m. EST will be shipped in mostcases the same day. Any orders placed after that time will be shipped the next day.
FAXED ORDERS: Faxed orders are encouraged The same guidelines that are set up for other orders will bein effect for fax orders (i.e. delivery times, UPS shipments, etc.). If any questions should arise regarding a faxorder that you have sent, a customer service representative will contact you.
E-MAILED ORDERS: E-mail orders to [email protected]. We understand that these policies mayneed to be adjusted. Due to the nature of our business, there are times when a product must be receivedimmediately. If this situation arises, please inform our staff and we will do our best to meet your needs. Thankyou for your cooperation!
RETURN POLICY: Return item(s) will not be accepted without a Return Authorization Number (RA-#)Pleasecontact customer service to obtain this number. Returns must be shipped freight pre-paid. If a freight collectshipment is refused, we will invoice you for all freight charges that are incurred. All returns must be madewithin 30 days of invoicing and are subject to a 15% restocking charge. All special orders are non-returnable.Any returns as a result of our error are exempt from any restocking & freight charge but still require an RA#.
BACK ORDERS: Orders are normally shipped within 24-hours of placement. On occasion however, a prod-uct may be temporarily out of stock. If we ship your order incomplete, we will place the out of stock item onback order and ship it when we receive it. You will be notified of back orders and at that point will be able todecide to wait or receive a substitute item. Please advise our customer service department if you will not ac-cept back ordered items.
TECHNICAL SUPPORT: Free technical support is available by calling 1-800-241-7708 during regular busi-ness hours, or by e-mailing us at [email protected]. We will reply to email questions promptly. Ifyou’re needing assistance concerning any product we sell, just give us a call, we’ll be glad to help.
DISCLAIMER: Our technical advice, product recommendations, and services are based on informationwhich is believed to be reliable. This information is intended for use by competent persons who will utilize theirown judgment at their own risk. American Niagara / Tee Squares cannot be held liable for undesirable resultsobtained or for damages incurred by use of our advice, recommendations or services; in whole or in part.
PAYMENT TERMS: We accept the following credit cards: American Express, Visa, and Mastercard. Weoffer terms of - Net 30 Days to those customers who have filled out a complete credit application (available onrequest) and have received approval from our credit department. We also offer COD Payment and we acceptyour company check up to $500 on initial orders. On orders for export, we require payment via t/t wire trans-fer prior to shipment.
1-800-241-7708770-441-5900fax [email protected]
i
MISSION STATEMENTWe remain committed to provide YOU our customer with superior customerservice. We provide the correct solutions that will enable you to improveYOUR processes that will ultimately increase your bottom-line. You haveour firm promise to the highest quality BRAND-NAME products. We offerYOU the most reliable and professional Technical Support - anywhere! Wetake great pride in our unparalleled Customer Service. We embrace soundand ethical business practices with YOU in mind. Contact us for no-non-sense ANSWERS to solve your everyday problems.
CELEBRATINGOUR
38ANNIVERSARY
th
ii
1971 - 2009THANK YOU!
MEET YOUR PERSONAL SUPPORT TEAM!
Gary Voelz
Melanie Smallwood
David Barocas
April Hofmann
Betty Roistacher
Reggie Morganfeld
Mariela Carrasquillo
Vic Barocas
Al Cohen
Ervin Barocas
To contact Mariela Direct:
678-429-3952
Scotty Barocas
Vice-PresidentScreen Print Supply Div.
President
President (Emeritus)
Customer Service Manager
CFO / Comptroller
CEO
Manager, International Sales
Manager, Plant Operations
Customer Service
Manager, Florida Sales
Manager, Specialty Sales
V.P. & General Manager
Toll Free 800-241-7708770-441-5900 • ext. [email protected] Phone 678-982-8275
Toll Free 800-241-7708770-441-5900 • ext. [email protected] Phone 404-713-3633
April Hofmann • [email protected]
Toll Free 800-241-7708770-441-5900 • ext. [email protected] Phone 678-429-3952
Toll Free 800-241-7708770-441-5900 • ext. [email protected]
Toll Free 800-241-7708770-441-5900 • ext. [email protected]
Wayne Gramling
Toll Free 800-241-7708770-441-5900 • ext. [email protected]
Toll Free 800-241-7708770-441-5900 • ext. [email protected] Phone 404-406-3069
Toll Free 800-241-7708770-441-5900 • ext. [email protected] Phone 770-296-3754
Toll Free 800-241-7708770-441-5900 • ext. [email protected] Phone 404-384-9166
Toll Free 800-241-7708770-441-5900 • ext. [email protected]
Toll Free 800-241-7708770-441-5900 • ext. [email protected]
Mitzi RacioppiIndependent Representa tiveToll Free 800-241-7708770-441-5900 • ext. [email protected]
1-800-241-7708770-441-5900
Fax 770-409-7259AMERICAN NIAGARA
6690 Jones Mill Court - Bldgs A&BNorcross, GA 30092 USAwww.american-niagara.com
SECTIO N 1TERMS & CONDITIONS Page iMISSION STATEMENT / CONTACTS Page iiTABLE OF CONTENTS Page iii
SECTIO N 2TEXTILE INKSQCM INK COMPANY Page 1XOLB-XTRA Opaque Low Bleed Page 1WOW - Four Color Process / Glitter Inks Page 2Sparkling Metallic / Stretch Inks Page 3Water Base / Matching System Page 4Rubber Base Inks / Additives & Modifiers Page 5
SECTIO N 3TEXTILE INKSRUTLAND SCREEN PRINTING PRO DUCTS Page 6White Inks / Color Booster Mixing System Page 7Systems / Specialty Powders & Flakes Page 7Reducers / Thickeners / Modifiers / M2 /MA Page 8MC-4 Color Process Inks Page 9ML - Low Bleed Series / Environmental Inks Page 9EV Claira Ink Mixing System Page 9PVC Free / Water Base Ink System Page 10Water Base Discharge Inks Page 11Claria High Opacity Non-Phthalate Mixing System Page 12-13Claria Non-Phthalate Color Concentrate Mixing System Page 14-15
SECTIO N 4DUBUIT U.V. INKSMonoplak U.V. Inks Page 16-17Nova U.V. Inks Page 18-19
SECTIO N 5EMULSIONSCHROMALINE Page 20MURAKAMI Page 20XENON Page 20
SECTIO N 6SCREEN PREP, RECLAIMING & CHEMICALSANC Page 20MURAKAMI CHEMICALS / Squeegees Page 21-23FRANMAR Page 24
SECTIO N 7MESH / FRAMESSmart Mesh Page 25Fabric & Frames Page 26Pre-Stretched / Re-Stretch Page 26NEWMAN ROLLER FRAMES Page 27Automatic Textile Frames Page 28Newman ST Meter Page 28Newman Squeegees & Flood Bars Page 29
SECTIO N 8SPRAY ADHESIVES / SPO T CLEANING SO LUTIO NSPlatinum Web & Mist Adhesives Page 30Triple-Blend Plastisol Remover Page 30Spot Cleaning Station Page 31Pull-Out Aerosol Spot Remover Page 31Silicone Spray Aerosol Page 31Kwik-Kleen Stain Remover Page 31
SECTIO N 9SPRAY GUNS & PARTSMystic Textile Cleaning Gun Page 32
SECTIO N 10SUPPLIES / FILMSEnviro-Tack 4000 Water Based Adhesive Page 33Screen Opener (Aerosol) Page 33Scrub Pads Page 33Kwik-Frame (2 part Adhesive) Page 33Pellons (TEE SQUARES - Registration Squares) Page 33Tee-Wipes #20 Page 33Squeegee Blades Page 33Squeegee Complete (w/wood handle) Page 33Gloves (disposable) Page 33Blue Blockout Tape Page 34Pallet Tape Page 34NEWMAN Flex Tape Page 34NEWMAN Block Tape Page 34Vellum Film Page 34Laser Film Page 34Ink-Jet Film (waterproof) Page 34Jalema Filing Systems Page 35
SECTION 11 EQUIPMENTWashout Booths Page 36Filtration / Recirculation Systems Page 36Dip Tanks Page 36Saturn Racks Page 37Rolling Job Cart Page 37Racked Drying Closet Page 37Fimor Squeegees Page 38Serilor Short Cut Page 39Serilor Kutronic Page 39Vastex Page 40Workhorse Products / Tuf Products / Progressive Machines Page 41-42
Table of Contents iii
XOLB inks are high opacity multi-purpose inksdesigned for thin film opaque printing. Thesmooth creamy consistency leaves an evenuniform color on white flash bases and can beopaque on black without a white base withscreens as fine as 160 mesh. XOLB inks arefast flashing, cure with a non-tack surface, andcontain clean bright pigments.
XOLB - XTR OPAQUE LOW BLEEDProduct # ColorXOLB-102 WHITEXOLB-120 SOFT TONE WHITEXOLB-130 FAST FLASH WHITEXOLB-140 MULTI PURPOSE WHITEXOLB-145 AUTOMATIC WHITEXOKB-201 YELLOWXOLB-202 GOLDXOLB-205 VEGAS GOLDXOLB-210 CHROME YELLOWXOLB-302 ORANGEXOLB-304 YELLOW ORANGEXOLB-401 SCARLETXOLB-402 CARDINALXOLB-403 FLUORESCENT PINKXOLB-404 CERISEXOLB-405 BLAZE REDXOLB-408 BRIGHT REDXOLB-425 ORANGE REDXOLB-426 CARDINALXOLB-453 FUCHSIAXOLB-501 SKY BLUEXOLB-502 COLUMBIA BLUEXOLB-503 ROYAL BLUEXOLB-504 NAVY BLUEXOLB-505 PROCESS BLUEXOLB-506 ULTRAMARINE BLUE
XOLB - XTR OPAQUE LOW BLEED / CONT.Product # ColorXOLB-508 LT. TURQUOISEXOLB-509 AQUA ICEXOLB-539 MEDIUM BLUEXOLB-601 DARK MAROONXOLB-602 PURPLEXOLB-603 MAGENTAXOLB-604 LILACXOLB-605 FLUORESCENT PURPLEXOLB-607 MAROONXOLB-608 BURGUNDYXOLB-609 VIOLET PURPLEXOLB-701 GRASS GREENXOLB-703 KELLY GREENXOLB-704 TURQUOISEXOLB-705 LIME GREENXOLB-706 APPLE GREENXOLB-710 FOREST GREENXOLB-715 NEON JADEXOLB-731 BLACK FORESTXOLB-801 TAN FLESHXOLB-802 FLESHXOLB-803 RUST TEXAS ORANGEXOLB-804 BURNT UMBERXOLB-805 MEDIUM BROWNXOLB-808 OCHREXOLB-902 GREYXOLB-911 JET BLACK
DESCRIPTION: “CREAMY GLACIER WHITE”,XOLB-158, is one of QCM’s latest, most dramatic, whiteinks. Glacier Whites exhibit a brilliant whiteness, so whitethey almost glow.
GLACIER WHITESProduct # ColorXOLB-136 ALPINE WHITEXOLB-150 GLACIER WHITEXOLB-151 GLACIER MAX WHITEXOLB-158 CREAMY GLACIER WHITEXOLB-158.1 NEW GLACIER WHITEXOLB-159 GLACIER PLUS WHITEXOLB-165 POLAR WHITE
PERM SERIES - POLYESTER SUPER NON-BLEEDProduct # ColorPERM-170 PERMA-WHITEPERM-220 PERMA-GOLDPERM-401 PERMA-REDSTR-151 PERMA-STRETCH WHITE
1
Color Matching Services available to meet your requirements
QMX SERIES III - QUICK MATCH SYSTEM INKSProduct # ColorQMX-1000 TRANSPARENT BASEQMX-1101 OPAQUE WHITE BASEQMX-1020 W.O.W. TRANS. BASEQMX-1120 W.O.W. WHITE BASEQMX-1030 WET ON WET CLEAR BASEQMX-1130 WET ON WET WHITE BASEQMX-2001 YELLOWQMX-3003 ORANGEQMX-4032 RED (YELLOW SHADE)QMX-4035 RED (BLUE SHADE)QMX-5001 BLUE (RED SHADE)QMX-5002 BLUE (GREEN SHADE)QMX-5004 BLUE ULTRAMARINEQMX-6002 CLEAN VIOLETQMX-6003 DURABLE VIOLETQMX-6018 MAGENTAQMX-7002 GREENQMX-9001 BLACK
2
QMX FLUOROESCENT PLUS SYSTEMProduct # ColorQMX-2007 SATURN YELLOWQMX-3007 BLAZE ORANGEQMX-4016 ROCKET REDQMX-4017 NEON REDQMX-4022 NEON PINKQMX-5017 HORIZON BLUEQMX-6019 FLUORESCENT PURPLEQMX-7007 SIGNAL GREENQMX-9002 SPARKLING SILVERQMX-PLUS ALL FLUORESCENTS (PINTS)KITQMX-PLUS ALL FLUORESCENTS (QUARTS)KIT
WOW - FOUR COLOR PROCESS INKSProduct # ColorWOW-219 PROCESS YELLOWWOW-492 PROCESS MAGENTAWOW-522 PROCESS BLUEWOW-920 PROCESS BLACKLFP-429 HALFTONE STRONG RED
WOW SERIES III - SIMULATED PROCESSProduct # ColorWOW-201 YELLOWWOW-408 BRIGHT REDWOW-466 SIM MAGENTA
WOW SERIES III - SIMULATED PROCESS - CON’TProduct # ColorWOW-503 ROYAL BLUEWOW-566 SIM LIGHT BLUEWOW-766 SIM GREENWOW-901 BLACKWOW-1001 WOW HALF TONE BASE*Excellent for use with various Color Separation Software
GEL BASESProduct # ColorATP-100 CLEAR GEL BASEATP-1001 ADHESIVE GEL (GLUE)LFP-1060 CRYSTAL GELLFP-1063 IMPROVED CRYSTAL GELATP-190 FOIL ADHESIVEATP-194 FOIL ADHESIVEWOW-1015 SOFTEE BASE - Soft Hand/Wet on WetAP-744 NEON OP. GREEN*NOT RECOMMENDED FOR WET-ON-WET PRINTING
GL - FIRE IN ICE GLITTER INKSProduct # ColorGL-201 YELLOWGL-202 GOLDGL-203 DARK GOLDGL-212 COSMIC CRYSTALSGL-301 LIGHT ORANGEGL-401 FUCHSIAGL-402 ROSEGL-403 VALENTINE REDGL-404 LIGHT SANDGL-406 RED ORANGEGL-407 ROYAL REDGL-408 PINKGL-409 CABERNETGL-501 ROYAL BLUEGL-502 AQUAGL-503 PEACOCKGL-504 MEDIUM BLUEGL-505 SKY BLUEGL-506 SILVER BLUEGL-601 PURPLEGL-602 LILACGL-701 SHAMROCKGL-703 LIME GREENGL-704 MOSSGL-705 PALE GREENGL-801 DARK SAND
Color Matching Services available to meet your requirements
GL - FIRE IN ICE GLITTER INKS - Cont’dProduct # ColorGL-802 COPPERGL-803 BRONZEGL-804 SILVER BROWNGL-805 CINNAMONGL-901 SILVERGL-903 GUNMETALGL-906 HOLOGRAPHICGL-911 BLACKGL-1000 LOW-BLEED GLITTER BASE
3
MTL - SPARKLING METALLIC INKSProduct # ColorMTL-202 SPARKLING GREEN GOLDMTL-204 SPARKLING GOLDMTL-206 SPARKLING BRONZEMTL-207 METALLIC GOLD LEAF*MTL-220 METALLIC BRIGHT GOLDMTL-302 SPARKLING COPPERMTL-402 SPARKLING SCARLETMTL-403 SPARKLING RUBINEMTL-502 SPARKLING BLUEMTL-602 SPARKLING PURPLEMTL-702 SPARKLING GREENMTL-703 SPARKLING TEALMTL-902 SPARKLING SILVERMTL-903 METALLIC PLATINUM*MTL-905 BRIGHT METALLIC PLATINUM**COLOR MAY TARNISH WITH WASHING
REFLECTIVE INKS*Product # ColorLFP-1030 REFLECTIVE INKLFP-1041 SILVER REFLECTIVE INKWB-1020 WATER BASE REFLECTIVE INK*CAUTION - FULL CURE MUST BE OBTAINED
TSP - TEMPERATURE STABLE PUFF INKSProduct # ColorTSP-115 WHITETSP-116 SAHARA SANDTSP-201 YELLOWTSP-206 GOLDTSP-223 NEON YELLOWTSP-313 NEON ORANGETSP-401 SCARLETTSP-414 NEON PINKTSP-441 FLUORESCENT PINKTSP-503 ROYAL BLUETSP-504 NAVY BLUE
TSP - TEMPERATURE STABLE PUFF INKS - Cont’dProduct # ColorTSP-518 NEON BLUETSP-614 NEON PURPLETSP-615 NEON MAGENTATSP-702 KELLY GREENTSP-714 NEON GREENTSP-715 NEON JADETSP-805 MEDIUM BROWNTSP-930 JET BLACK
STR - STRETCH INKProduct # ColorSTR-100 CLEARSTR-1001 CLEARSTR-150 WHITESTR-151* PERMA-STRETCH WHITESTR-202 GOLDSTR-401 SCARLETSTR-503 ROYAL BLUESTR-703 KELLY GREENSTR-911 BLACK*Low bleed, high stretch white ink for printing on stretchy 100% poly
W B SERIES WATER BASE TEXTILE INKS VINYLFREE PRINTING INKS
A user friendly, water soluble ink made of heat settingbinder and pigment. Water base inks penetrate thefabric surface coating individual fibers with a thin film.The finish (non-glossy) is soft to the hand, taking onthe feel of the garment itself. The printed surfaceopens with the weave when stretched. With washing,water base will soften. W B Series inks are very lowin solvents and meet South Coast Air Quality require-ments.
W B PVC FREE - WATER BASE INKSProduct # ColorWB-100 CLEARWB-101 WHITEWB-201 YELLOWWB-205 VEGAS GOLDWB-206 GOLD
Color Matching Services available to meet your requirements
WB-207 FLO YELLOWWB-210 CHROME YELLOWWB-301 YELLOW ORANGEWB-302 ORANGEWB-307 FLO ORANGEWB-402 SCARLETWB-403 CARDINALWB-404 FLO PINK
W B PVC FREE - WATER BASE INKS - Cont’dProduct # ColorWB-405 BLAZE REDWB-408 BRIGHT REDWB-410 FLO REDWB-426 ROCKET REDWB-427 NEON REDWB-453 FUSHIAWB-501 SKY BLUEWB-502 MEDIUM BLUEWB-503 ROYAL BLUEWB-504 NAVY BLUEWB-506 ULTRAMARINEWB-507 FLO BLUEWB-508 LT. TURQUOISEWB-509 AQUA ICEWB-601 MAROONWB-602 PURPLEWB-603 MAGENTAWB-604 BURGUNDYWB-605 VIOLET PURPLEWB-606 LILACWB-702 KELLY GREENWB-703 FOREST GREENWB-704 TURQUOISEWB-705 LIME GREENWB-707 FLO GREENWB-801 TAN FLESHWB-802 OCHREWB-803 RUST (TEXAS ORANGE)WB-804 BURNT UMBERWB-805 MEDIUM BROWNWB-901 BLACKWB-902 GREY
4
WBX - PVC FREEWATER BAS E QUICK MATCHING S YS TEMProduct # ColorWBX-1000 CLEARWBX-1101 WHITEWBX-2001 YELLOWWBX-2007 FLUORESCENT YELLOWWBX-3003 ORANGEWBX-3007 FLUORESCENT ORANGEWBX-4002 RED (YELLOW SHADE)WBX-4006 RED (BLUE SHADE)WBX-4012 MAGENTAWBX-4014 FLUORESCENT MAGENTAWBX-5001 BLUE (RED SHADE)WBX-5002 BLUE (GREEN SHADE)WBX-5004 ULTRAMARINE BLUEWBX-5017 FLUORESCENT BLUEWBX-6003 PURPLEWBX-7002 GREENWBX-7007 FLUORESCENT GREEN
RB Series Textile Screen Printing InkPVC FREE
General Characteristics: Simulated Plastisol Ink
DESCRIPTION: RB Textile Inks are rubber based, water bornePVC Free inks that simulate Plastisol inks in hand and opacity.They are tough, high performance printing inks that can be usedfor coating or screen printing on textiles and also on substratessuch as wood, plastic, metal, concrete, paper, rubber and leather.It produces a flexible, glossy, high opacity coating. They clean upand can be thinned with plain water.
APPLICATIONS: General purpose textile screen printing.Works very well for athletic garment printing providing an incred-ible stretch and bonding characteristics. Unlike standard waterbase screen print inks, these inks lay on the surface providing aplastisol look and feel. Printing on dark fabrics results in goodopacity and true color brilliance. Screen open time is very good.
FEATURES: Available in 39 bright, opaque standard colors. AnRBX Color Matching System is also available with 16 base andcolor components. These inks are PVC Free and meet or exceedCalifornia standards (certifiable). They have long open times inthe screen and exhibit a creamy, smooth print ability. Cleans upwith plain water.
PRINTING RECOMMENDATIONS:MESH: 110 to 200 tpi monofilament
STENCIL: A water resistant emulsion or film is required as wellas water resist blockout.
CURING: These inks will air dry to a full cure within 24 hoursmaking them suitable for many substrates that cannot endure hightemp curing. They will dry to the touch without heat in about 45minutes. If heat curing is desired we recommend 3000F for 45-90seconds or 2000F for 1-2 minutes.
CLEAN-UP: Clean up using water. CAUTION! This is a dryproduct! It will dry in the screen if left unattended. Alwaysflood the screen to minimize drying in and keep at least one pint ofink on the screen at all times.*See MSDS for safety instructions
RB-PVC FREE - RUBBER BASE INKS - High OpacityProduct # ColorRB-102 WHITERB-201 YELLOWRB-205 VEGAS GOLDRB-206 GOLDRB-210 CHROME YELLOWRB-301 YELLOW ORANGERB-302 ORANGERB-402 SCARLETRB-403 CARDINALRB-404 FLO. PINKRB-405 BLAZE REDRB-408 BRITE REDRB-426 ROCKET REDRB-427 NEON REDRB-453 FUCHSIARB-501 SKY BLUERB-502 MEDIUM BLUERB-503 ROYAL BLUERB-504 NAVY BLUERB-506 ULTRA-MARINE BLUERB-508 LIGHT TURQUIOSERB-509 AQUA ICERB-601 MAROONRB-602 PURPLERB-603 MAGENTARB-604 BURGUNDYRB-605 VIOLET-PURPLERB-606 LILACRB-702 KELLY GREENRB-703 FOREST GREENRB-704 TURQUOISERB-705 LIME GREENRB-801 TAN FLESHRB-802 OCHRERB-803 RUSTRB-804 BURNT UMBERRB-805 MEDIUM BROWNRB-901 BLACKRB-902 GREY
5RB-PVC FREE - RUBBER BASE INKS - High O pacity - Cont’dProduct # ColorRBX-1000 MIX CLEARRBX-1101 MIX WHITERBX-2001 MIX YELLOWREB-2007 FLO. YELLOWRBX-3001 MIX ORANGERBX-3007 FLO. ORANGERBX-4002 ORGANIC REDRBX-4006 QUINACRA REDRBX-4012 QUINACRA VIOLETRBX-4014 FLO. MAGENTARBX-5001 BLUE RED SHADERBX-5002 BLUE GREEN SHADERBX-5004 ULTRAMARINERBX-5017 FLO. BLUERBX-6003 CARBAZOLE VIOLETRBX-7002 MIX GREENRBX-7007 FLO. GREENRBX-9001 MIX BLACK
WATER BAS E INK ADDITIVES & MODIFIERSProduct # ColorAC-100 ANTI-CROCKSM-100 SOFT HAND MODIFIERMF-75 RETARDER #2MF-169 WB AIR DRY CATALYSTWBT-100 THICKENERMF-208 AQUEOUS OVERPRINTMF-231 FABRIC TOP COAT
S PECIALTY WATER BAS E PRODUCTS - AIR DRYProduct # ColorWBU-1001 CLEAR GLOSSY TOPCOATWBU-103 WHITEWBU-901 BLACKWBFA-100 WATER BASE FLOCK ADHESIVE
Color Matching Services available to meet your requirements
6
PLASTISOL BASES DESCRIPTION CB to Base EffectHS HS-0153 Hot Split Base 50:50 Hot SplitMA M2-0063 Extender Base 30:70 All PurposeMA MA-0221 Glitter Base (up to 70% glitter) Dry Glitter LookMA MA-0250 Chino Base 30:70 Extreme Soft Feel on lightsMG MG-0220 Flock Base 30:70 Flock Adhesive for TextilesMH MH-0217 Vintage Base 30:70 Vintage FeelMH MH-0245 Opaque Chino 30:70 Soft Feel Muted Color on darksMH MH-0540 V.O. Base 50:50 Mix High Opacity ColorsML ML-0749 LB Jersey Base 30:70 Mix Low Bleed ColorsMP MP-0137 Sponge Puff 50:50 Soft Feel PuffMP MP-0231 Blister Base 30:70 Blister LookMS MS-0000 Primer Clear 50:50 Extreme Soft HandMV MV-0235 Meteor Base 30:70 Hard Rubber Look & FeelMV MV-0246 Shatter Base 30:70 Cracked LookND ND-3101 Luminiscent 10:90 Glow in DarkNG NG-0026 Therm-O-Line Clear 30:70 AdhesiveNM NM-0053 Clear 50:50 Nylon MeshNP NP-0004 Puff Base 50:50 Puff ColorNX NX-0031 Spand-E-Sol 50:50 Mix Stretch Inks
WATER BASES WB-99 Pigments to BaseWB 0248 Quick Cure Base 50:50 Print Soft Brilliant Colors on LightsWB WB-0249 General Purpose 5:95 Print Low Cost Colors on LightsWB WB-0255 Discharge Base 10:90 Discharge Prints on Darks (w/Activator)
MIXING SYSTEMS *Formulas are available in M2007 Ink Mixing SoftwareCB Color Boosters Mix per formula w/Base Base DependentE2 RFU Pthalate Free Plastisol Mix per formula Prints on lights & darks w/underlayM2 RFU Plastisol Mix per formula Prints on lights & darks w/underlayHD RFU High Density Plastisol Mix per formula Prints 3-D imagesSD RFU Soft Density Plastisol Mix per formula Easy Prints 3-D Soft imagesWHITE INKS FABRIC ADVANTAGEMH MH-9057 Core White 100% Cotton High Opacity & Quick FlashMH MH-9600 Soft White 100% Cotton Bright WhiteML ML-9054 Skylar White Poly/Cotton Blends High Opacity & Quick FlashML ML-9232 Maximum White Plus Poly/Cotton Blends High Opacity Easy PrintML ML-9240 Snap White Poly/Cotton Blends High Opacity & Quick FlashML ML-9250 Supreme White Poly/Cotton Blends High Opacity w/good low bleedML ML-9540 Bright White Poly/Cotton Blends High Opacity Bright WhitePOLYESTER INKSML ML-9051 Dyno White Most 100% Polyester High Opacity w/good low bleedML ML-9749 Jersey White Most 100% Polyester High Opacity w/good low bleedML ML-0266 Dyno Grey 100% Polyester Grey underbase for excellent low bleed blockingNYLON WHITESNM NM-9036 American White 100% Nylon High Opacity w/easy printGEL INKSHG HG-0280 Super Gel 100% Cotton HIgh Gloss 3-D ImagesHG HG-0182 Silver Gel 100% Cotton Brilliant Silver 3-D ImagesHG HG-0186 Sparkle Gel 100% Cotton Silver 3-D images
QUICK SEARCH FOR RUTLAND INKS
7
White InksWHITES FOR POLY/COTTON BLENDSML9054 SKYLAR WHITEML9063 STAR WHITEML9230 MAXIMUM WHITEML9232 MAXIMUM PLUS WHITEML9240 SNAP WHITEML9250 HO LB SUPREME WHITEML9073 SF LOW BLEED WHITEML9071 COOL WHITEML9241 MIRACLE WHITE
WHITE FOR 100% COTTONMH9057 CORE WHITEMH9600 SOFT WHITEMH9072 SF COTTON WHITE
WHITES FOR 100% POLYESTERML9051 DYNO WHITEML9749 LB JERSEY WHITE
WHITES FOR NYLONNM9036 AMERICAN WHITENM9474 NYLON MESH WHITE
BasesMA0209 SPARKLE BASEMA0221 GLITTER BASEMA0250 CHINO BASEMH0172 MATTE OPAQUE BASEMH0217 VINTAGE BASEMH0245 OPAQUE CHINO BASEMH0538 OPAQUE BASEMH0540 V.O. BASEML0749 LB JERSEY BASEMP0231 BLISTER BASEMS0000 PRIMER CLEARMV0235 METEOR BASEMV0246 SHATTER BASEMW0001 HYDRA-SOL
Color Booster Mixing SystemCB1017 FLUOR MAGENTA CBCB1037 FLUOR VIOLET CBCB1440 VIOLET COLOR BOOSTERCB2065 FLUOR BLUE CBCB2441 BLUE #1 COLOR BOOSTERCB2442 BLUE #2 COLOR BOOSTERCB2443 MARINE COLOR BOOSTERCB3033 FLUOR GREEN CBCB3443 GREEN COLOR BOOSTERCB4037 FLUOR YELLOW CBCB4041 FLUOR LEMON YELLOW CBCB4228 NON-MIGRATING YELLOW CBCB4449 YELLOW COLOR BOOSTERCB5018 FLUOR ORANGE CBCB6055 FLUOR PINK CBCB6056 FLUOR RED CBCB6285 WASH RESIST RED COLOR BOOSTERCB6446 SCARLET COLOR BOOSTERCB6447 RED COLOR BOOSTERCB6449 PERMANENT RED COLOR BOOSTERCB7053 BROWN #1 COLOR BOOSTERCB8394 BLACK COLOR BOOSTERCB9256 WHITE COLOR BOOSTER
CC Series for Color Crunch & Spot ProcessCC2300 CC 300C BLUECC3354 CC 354C GREENCC4123 CC 123C YELLOWCC6032 CC 032C RED
CP Specialty Rug BaseCP0187 LOW FUSION RUG BASE
Speciality Powders & FlakesCS0017 SPARKLE SILVERCS0018 SPARKLE GOLDCS0020 METALLIC GOLDCS0022 CRYSTALINACS0025 PEARLESCENTCS0027 JT SILVER PIGMENTCS0029 876 C BRONZECS0030 871C GOLDCS0033 METALLIC SILVERCS0036 SPARKLE K GOLDCS2011 SPARKLE ROYALCS3005 LUMINESCENTCS3010 SPARKLE GREENCS6038 SPARKLE RED
FX Non-Fiberillating BlacksFX8033 SOLID BLACK
HD High Density & HG Gel InkHD0138 HIGH DENSITY CLEARHD0239 HD GLASS CLEARHD8394 HIGH DENSITY BLACKHD9256 HIGH DENSITY WHITEHG0180 ULTRA GEL CLEARHG0182 SILVER GELHG0185 PEARL GELHG0186 SPARKLE GELHG0280 SUPER GEL CLEARHG0285 ULTRA GEL CLEAR (THIN)HG0385 SUPER GEL CLEAR (THIN)HG4229 GOLD GEL
PRODUCT LIST
Color Matching Services available to meet your requirements
Reducers,Thickeners & ModifiersM00001 VISCOSITY REDUCERM00004 LIQUID THICKENERM00007 FR VISCOSITY REDUCERM00009 QUICK FLASH ADDITIVEM00010 THICKENER #10M00012 DETA CK/REDUCERM00014 MODIFIER 14M00015 DULLING PASTEM00022 TACK FREE ADDITIVEM00023 FLA ME RETARDANT ADDITIVEM00047 FOIL RELEASE A DDITIVEM00333 THICKENER #3
M2 Color Mixing SeriesM20063 NATURAL BASE M-2M21017 OPAQUE FLUORESCENT MAGENTAM21037 OPAQUE FLUORESCENT VIOLETM21440 HO VIOLET M-2 Q 5 galM22065 OPAQUE FLUORESCENT BLUEM22441 HO BLUE #1 M-2M22442 HO BLUE #2 M-2M22443 HO MARINE M-2M23033 OPAQUE FLUORESCENT GREENM23443 HO GREEN M-2M24037 OPAQUE FLUORESCENT YELLOWM24041 OPAQUE FL. LEMON YELLOWM24449 HO YELLOW M-2M25018 OPAQUE FLUORESCENT ORANGEM26055 OPAQUE FLUORESCENT PINKM26056 OPAQUE FLUORESCENT REDM26446 HO SCARLET M-2M26447 HO RED M-2M26449 PERMANENT REDM28002 PROCESS BLACKM28394 HO BLACK M-2M29000 HO LB FF WHITEM29256 M-2 WHITE
MA All Purpose SeriesMA0225 PANTONE 421CMA0730 GREYMA1211 PANTONE 266CMA1516 CERISEMA1569 PURPLEMA2163 PANTONE 3145CMA2251 PANTONE 286CMA2259 PANTONE 279CMA2275 PANTONE PROCESS BLUE CMA2283 BUD LIGHT NAVYMA2291 ROYAL BLUEMA2402 LIGHT NAVYMA2406 NAVYMA2422 FLUORESCENT BLUEMA2449 LT. ROYALMA2454 ULTRAMARINEMA2499 TURQUOISEMA2583 PEACOCKMA2589 LIGHT BLUEMA2609 BLUEMA2734 ROYAL BLUEMA2768 BRIGHT BLUEMA3167 PANTONE 347CMA3398 DK GREENMA3403 DALLAS GREENMA3408 KELLY GREENMA3416 FLUORESCENT GREENMA3859 APPLE GREENMA4137 BRIGHT GOLD 116CMA4138 PANTONE 116CMA4153 MARIGOLD 145UMA4163 LT. GOLDMA4202 GOLDMA4215 PANTONE 123CMA4220 PANTONE 1245CMA4395 GOLDMA4486 LEMON YELLOWMA4487 MEDIUM YELLOWMA4611 YELLOWMA4769 BRIGHT GOLDMA5085 LIGHT ORANGE 1375 CMA5201 PANTONE 165CMA5534 ORANGEMA6220 PANTONE 1795CMA6230 PANTONE 186CMA6242 PANTONE 199CMA6253 PANTONE 200CMA6267 PANTONE 239CMA6270 FIERY REDMA6397 DARK MAROONMA6400 SCARLETMA6485 REDMA6559 MAROONMA6772 BRIGHT REDMA6823 N. REDMA6889 A. REDMA7494 BROWNMA7574 DARK BROWNMA8394 BLACK
8
PRODUCT LIST
Color Matching Services available to meet your requirements
MC 4-Color Process InksMC0125 PROCESS EXTENDER BASEMC2042 PROCESS CYANMC2265 TS PROCESS CYANMC4026 PROCESS YELLOWMC4265 TS PROCESS YELLOWMC6039 PROCESS MAGENTAMC6265 TS PROCESS MAGENTAMC8002 PROCESS BLACKMC9030 PROCESS WHITE
MG Flock BaseMG0220 FLOCK BASE
ML Low Bleed SeriesML0266 DYNO GREYML0686 FLESHML0730 GRAYML1516 CERISEML1569 PURPLEML2402 LIGHT NAVYML2406 NAVYML2609 BLUEML2768 BRIGHT BLUEML3403 DALLAS GREENML3408 KELLY GREENML4202 GOLDML4611 YELLOWML4769 BRIGHT GOLDML5085 LIGHT ORANGE 1375 CML5534 ORANGEML5813 ORANGE 033ML6400 SCARLETML6772 BRIGHT REDML6889 A-REDML8394 BLACKML9201 LB WHITE CURABLE THINNER
NA Thinner, Bases,and Specialty Glitter InksNA0005 PLASTISOL THINNERNA0008 AP CRYSTALINANA0028 AP PEARL BASENA0468 AP SPARKLE SILVERNA0623 AP CLEARNA0840 AP CLEAR SHAPENA4467 AP SPARKLE GOLD
ND Luminescent (Glow-in-Dark)ND3101 LITE GREEN LUMINESCENCE
NM Nylon Mesh SeriesNM0053 NMSS CLEARNM8394 NMSS BLACKNM9036 AMERICAN WHITENM9474 NMSS WHITE
NP Puff SeriesNP0004 NATURAL BASE PUFFNP0055 PUFF ADDITIVE CONCENTRATENP8000 BLACK PUFFNP9001 LB WHITE PUFF
NU Suede SeriesNU0500 SUEDE NATURAL BASE
Reflective PlastisolsRC0179 RC SILVER BASERF0000 REFLECT-I-SOL CLEARRF0100 REFLECT-I-SOL GRAYRM0131 REFLECTIVE TITANIUMRM0132 REFLECTIVE BASERM0200 REFLECTIVE GRAY
ENVIRONMENTAL INKSEV CLAIRA Ink Mixing System (NEW)EV0640 CLAIRA OPAQUE BASEEV1440 CLAIRA VIOLET (CONC)EV2441 CLAIRA BLUE #1 (CONC)EV2442 CLAIRA BLUE #2 (CONC)EV2443 CLAIRA MARINE (CONC)EV3443 CLAIRA GREEN (CONC)EV4449 CLAIRA YELLOW (CONC)EV6446 CLAIRA SCARLET (CONC)EV6447 CLAIRA RED (CONC)EV8394 CLAIRA BLACK (CONC)EV9256 CLAIRA WHITE (CONC)EV9240 CLAIRA LB WHITEEV0055 CLAIRA PUFF ADDITIVE (CONC)EV0247 CLAIRA SOFT DENSITY BASEEV0266 CLAIRA DYNO GREY
9
PRODUCT LIST
Color Matching Services available to meet your requirements
10
RUTLAND PVC-FREE WATER-BASED INK SYSTEM
Rutland, in an effort to provide the industry with an environmentally friendly printing solution,has developed one of the best color matching water-based systems offered in today’s market.
WB-99 PVC FREE WATER-BASE PIGMENT MIXING SYSTEMWB-99 is a high performance PVC Free Pigment mixing system for 100% cotton lightfabrics or dark fabrics when using the discharge process. This mixing system allowsthe printer to mix thousands of colors using formulas from the M2007 Ink Mixingsoftware. WB-99 Pigments are vibrant to give the most brilliant color matches. Whencombined with the WB0249 General Purpose Base, prints with extremely soft feel at alow cost on white fabrics. WB0249 General Purpose Base requires longer cure times,up to 3 minutes depending on your dryer configuration. Combine with the WB0248Quick Cure Base for faster production demands when printing on 100% cotton lights.Combine with WE0255 Discharge Base and activate with WB0259 Discharge Agent toprint on 100% cotton darks.
WB0248 QUICK CURE BASEThis base is to be used with WB-99 pigments. Mix pigments at up to 10% by weightto create colors.
WB0249 GENERAL PURPOSE BASEWB0249 base is used with WB-99 pigments. Mix pigments at up to 10% by weightto create colors. General Purpose Base will not cure as quickly as the Quick CureBase, so take this into account when adding WB-99 PS pigments. Any mixture madeusing the General Purpose Base should be tested prior to production. WB0249 Gen-eral Purpose Base is less expensive than the other bases.
WB0255 DISCHARGE BASEDischarge base is used with pigments. Mix pigments at up to 10% by weight to createdischargeable colors. Test all color mixes for suitability piror to mixing productionquantities. User must add 3% to 6% by weight of WB0259 Discharge Agent to acti-vate this base. Only activate enough product to run 3 to 4 hours. The additive shouldbe mixed into the base with a high speed drill or homogenizer.
WB9067 DISCHARGE WHITE PLUSDischarge White Plus is used as an underlay or stand alone white to enhance thebrilliance of colors where garments are not completely discharging. User must add3% to 6% by weight of WB0259 Discharge Agent to activate the white. Only activateenough product to run 3 to 4 hours. The additive should be mixed into the base witha high speed drill and or a homogenizer.
11
WB-99 PS Pigment Mixing SystemWB0248 QUICK CURE BASEWB0249 GENERAL PURPOSE BASEWB0255 DISCHARGE BASEWB0256 LOW CROCK BINDERWB0257 PENATRANTWB0258 LUBRICANTWB0259 DISCHARGE AGENTWB0269 BURN OUT PART AWB0270 FOIL RESIST ADDITIVEWB0273 WB BURNOUT PART BWB0277 JB SOFT CRACKED NATURAL BASEWB0510 THICKENERWB1141 PS VIOLETWB1142 PS FLUO MAGENTA
WB0259 DISCHARGE AGENTUse from 3% to 6% by weight to activate the WB0255 Discharge Base or theWB9067 Discharge White Plus.
WB0256 LOW CROCK BINDERThis may be added to heavily saturated colors to improve Crock resistance. WB-99will normally pass industry Crock test standards as is. WB-99 colors will have bettercrock results after the print ages 24 hours or more. Low Crock Binder would typi-cally be added to other pigment systems when using WB-99 bases. Add up to 10%by weight of the Low Crock Binder to improve pigment crock test results.
WB0257 PENETRANTWB0257 is added to WB-99 inks at up to 5% by weight to provide better penetrationinto certain fabrics thereby giving a softer feel.
WB0258 LUBRICANTAdd WB0258 at up to 5% by weight to provide more open time of the wet ink toprevent drying in the screens.
WB0510 THICKENERUsed at 1/2 to 1% by weight to increase viscosity of WB-99 ink. This would lead toan increase in opacity, but will increase the hand of the print.
WB0277 JB SOFT CRACK NATURALWB0277 creates a soft cracked vintage look on 100% cotton light or dark fabrics.Mix up to 30% WB99 PS pigments by weight to create colors. WB0277 must becured properly to achieve the cracked vintage look.
WB1143 PS FLUO VIOLETWB2411 PS BLUE 1WB2414 PS BLUE 2WB2415 PS MARINEWB3246 PS GREENWB4246 PS YELLOWWB4247 PS FLUO LEMONWB6364 PS REDWB6365 PS FLUO REDWB6367 PS SCARLETWB8037 PS BLACKWB9067 DISCHARGE WHITE PLUSWB9068 MIXING WHITEWB9070 JB SOFT CRACKED WHITE
Color Matching Services available to meet your requirements
12
13
14
15
16DUBUIT INKS
UV Monoplak(Multiplak)
Who will use it?
UV screen printers who want a Multipurpose ink with excellent adhesion on a variety and hard-to-adheresubstrates, such as for POP, loose leaf, and promotional products, etc.
Printers interested in t he quality results provided by the Thixotropic properties of t his ink.
Substrates:
Monoplak can be used on the following substrates, among others:
styrene / coated paper/ coated board / HDPE flat sheets / print treated polyester /
polystyrene / ABS / some coated metal / PSA films / rigid PVC / some acrylics/
certain p olypropylenes, including treated fluted polypropylene (such as Coroplast™) / top surface polycarbonates / topsurface print-treated polyesters
Monoplak can work on other substrates. In all cases, printers must test the ink to ensure it meets the end user’srequirements.
Do not use Monoplak on materials with low dy ne surface tension. Do not use Monoplak on mat erials such as vinylthat contain a high level of plasticizer.
Appearance:
Standard colors have a gloss finish. Process colors are available in gloss or matt e finish.
How to use it:
Monoplak is a ready-to-print, NVP-free, and RoHS compliant ink with excellent intercoat adhesion when printingmultilayer Dubuit inks. This ink can be used without additives. Monoplak does not require any additives for printingon corona treated polyolefins and treated fluted polypropylene, such Coroplast™ type substrates.
Monoplak has not been formulated for extended outdoor exposure. Contact Dubuit if you need extended outdoorexposure.
Monoplak has been formulated to prevent blocking.
Printing:
Mesh: 355 to 420 mesh with a high tension screen is best.
Cure: A UV lamp with a minimum of 100 mj is required. Curing will vary according to ink film thickness and otherprinting variables. The addition of clear in the ink will improve curing but will also affect other factors . Propermaintenance of the curing unit is critical.
Stencil: Direct or capillary film emulsions compatible with UV ink are required. Check with your emulsion supplier.
Squeegee: 70 - 90 durometer poly urethane squeegee with a sharp edge. Multi durometer blades work fine.
Opacity:In certain cases, the addit ion of 3 to 5% white can provide increased opacity for a specific color withoutaffecting the appearance of the color.
Additives: This ink is ready to use, however the viscosity can be adjusted by adding no more than 10% of NVP-freeMPG thinner from Dubuit.
Cleaning: Dubuit offers a UV cleaning product; however if you use anot her product, please check for compatibility.
17Storage: Monoplak must be stored in a dry, dark, well-ventilated area (if p ossible between 50 and 86 degrees F). Inkshould not be contaminated, and ink from t he press should not be returned t o the original container.
Packaging: Standard packaging: 1 quart, 1 gallon, 5 gallons. Other packaging, such as drums, available upon request.
Colors: Based on Monoplak series 700. All Monoplak colors are intermixable.
4 color process Gloss Matte
Cyan 9450 450
Specialty Colors
Dubuit has a wide range of specialty colors, like fluorescents, metallics, pearlescent s, mirror finish, glow in the dark, etc.Contact Dubuit for your specific needs.
Free Services from Dubuit
Color: Dubuit provides color matching service with free formulas.
Pantone®: A free formula guide is available on the web for Pantone® colors or can be requested.
Substrates: Dubuit p rovides free substrate tests for ink recommendation.
Limited Warranty
Dubuit guarantees the quality of its products. Since Dubuit cannot anticipate or control factors and variables under which theproducts and information will be used, Dubuit cannot guarantee the results. The information provided by Dubuit is provided in goodfaith, and the responsibility is limited solely to the exchange of the product supplied. The information provided in this technical sheetis provided as guidelines and is not intended to represent or warrant or ensure suitability of the product for any specific purpose.Users bear sole responsibility for selecting the appropriate product and for meeting their end use requirements. Testing in aproduction situation before using any Dubuit product is required to ensure the product meets the end user requirements. Dubuitproducts are to be used in the printing process described in the appropriate technical sheet and are not to be used in any other way.Please refer to the General Condition of Sales for more details.
Health and Safety: See Material Safety Data Sheet (MSDS). Protection suggested: skin, hand, eye. If skin is incontact with ink, only use soap and water to thoroughly wash.
Presses: Monoplak can be used on a variety of printing presses, from manual to semi-automat ic to automatic to inlinemulticolor.
Magenta 9420 420
Yellow 9430 430Black 9410 410
Half tone base 099 098
Opaque colors
703 Black706 WhiteStandard opaque colors (Basic 9 to be used also for color matching)
710 Mid yellow 760 Pink 702 Tinting white720 Gold yellow 770 Violet 701 Tint ing black730 M andarin 780 Primary blue 095 Clear740 Vermilion 790 Emerald green750 Dark red
Other standard colors available200 Primrose yellow 506P PMS® Warm red 800 Peacock blue201P PMS® yellow 507P PMS® Red 032 803P PMS® Blue 072202P Yellow 012 508P PMS® Rubine red 804P PMS® Reflex blue210 Lemon yellow 509P PMS® Rhodamine red 805P PMS® Process blue220 Medium yellow 510 Brilliant red 805 Blue300 Orange 600 Cerise 820 Brilliant blue301P PMS® Orange 021 605 Rhodamine 825 Medium blue310 Vermilion 700 Purple 900 Green500 F ire red 701P PMS® Purple 903P PMS® Green505 Red 702P PMS® Violet 910 Emerald green
720 Violet 920 Forest green
18NEW DUBUIT INKS NEW
Who will use it?
UV screen printers who want a Point of Purchase , truly multipurpose UV ink with low odor.
Nova can be used on the following substrates, among others: styrene, coated paper, coated board, PVC,Coroplast™, Tyvek™, top-printed polycarbonate, polyester, vinyl, banner material, etc.
How to use it:
Nova is a ready-to-print, NVP-free, RoHS and REACH compliant ink with excellent intercoat adhesionwhen printing multilayer Dubuit inks. This ink can be used without additives.
.
Printing:
Mesh: 355 to 420 mesh with a high tension screen is best.
Cure: A UV lamp with a minimum of 100 mj is required. Curing will vary according to ink film thicknessand other printing variables. The addition of clear in the ink will improve curing but will alsoaffect other factors. Proper maintenance of the curing unit is critical.
Stencil:Direct or capillary film emulsions compatible with UV ink are required. Check with your emulsionsupplier.
Squeegee: 70 - 90 durometer polyurethane squeegee with a sharp edge. Multi durometer blades workfine.
Opacity: In certain cases, the addition of 3 to 5% white can provide increased opacity for a specificcolor without affecting the appearance of the color.
Additives: This ink is ready to use, however the viscosity can be adjusted by adding no more than10% of NVP-free MPG thinner from Dubuit.
Cleaning: Dubuit offers a UV cleaning product; however if you use another product, please check forcompatibility.
Storage: Nova must be stored in a dry, dark, well-ventilated area (if possible between 50 and 86degrees F). Ink should not be contaminated, and ink from the press should not be returnedto the original container.
Health and Safety: See Material Safety Data Sheet (MSDS).
Packaging: Standard packaging: 1 quart, 1 gallon, 5 gallons.
Presses: Nova can be used on a variety of printing presses, from manual to semi-automatic toautomatic to inline multicolor.
Excellent to prevent light-reflectionSubstrates:
Printers must test the ink before usage to ensure it meets the end user’s requirements.Do not use Nova on materials with low dyne surface tension (below 40).Appearance:Standard colors have a satin finish with good opacity.
UV Nova
Nova has not been formulated for extended outdoor exposureContact Dubuit if you need extended outdoor exposure.Nova has been formulated to prevent blocking.
Protection suggested: skin, hand, eye. If skin is in contact with ink, only use soap andwater to thoroughly wash.
Other packaging, such as drums, available upon request.
Colors: Based on Nova series 700. All Nova colors are intermixable.
4 color process
Cyan HCC2355
Magenta HCC2354
Yellow HCC2353
Black HCC2356
Opaque colors
703 Black
706 White
Standard opaque colors (Basic 9 to be used also for colo r matching)
710 Mid yellow 760 Pink 702 Tint ing white
720 Gold yellow 770 Violet 701 Tint ing black
730 Mandarin 780 Primary blue 095 Base
740 Vermilion 790 Emerald green 090 Varnish
750 Dark red 500 Red 098 Bas e thixo
Other standard colors available
505 Fire red
804P PMS® Reflex blue
Specialty Colors
Dubuit has a wide range of special colors, with a one gallon minimum order.
Free Services from Dubuit
Color: Dubuit provides color matching service with free formulas.
Pantone®: A free formula guide is available on the web for Pantone® colors or can be requested.
Substra tes: Dubuit provides free substrate tests for ink recommendation.
Limited Warranty
Dubuit guarantees the qual ity of its products. Since Dubuit cannot anticipate or control factors and variables under which the productsand information will be used, Dubuit cannot guarantee the results. The information provided by Dubuit is provided in good fait h, andthe responsibili ty is limi ted solely to the exchange of the product supplied. The information provided in this technical sheet is provided asguidel ines and i s not intended to represent or warrant or ensure suitability of the product for any specifi c purpose. Users bear soleresponsibility for select ing the appropriate product and for meeting thei r end use requirements. Testing in a production s ituation beforeusing any Dubui t product is required to ensure the product meets the end user requirements. Dubuit products are to be used in theprint ing process described in the appropriate technical sheet and are not t o be used in any other way. Pl ease refer to the General
Condi tion of Sales for more details.
19
20
EMUSIONSSBQ Photopolymer:Photocure Blu Excellent detail and resolution. Prints Plastisol, Discharge and Water Base Inks (Murakami)
Aquasol HV-HVP Outstanding resolution and definition. Prints Plastisol, Discharge and Water Base inks.(Murakami)
QXL SBQ Textile Emulsion (Xenon)
Chroma/Blue Very Fast exposing, Superior mesh bridging and Excellent reclaimibility. (Chromaline)
Dual Cure:Photocure Pro Premium all purpose Dual Cure Emulsion, humidity resistant.(Murakami)
SF-9500 Premium Dual Cure Emulsion, excellent detail and definition.(Murakami)
902 QDC Super Bridging on Coarse Mesh (Xenon)
903 WR Water resistance (Xenon)
Magna/Cure UDC-HV Premium all purpose Dual Cure Emulsion. Water, solvent, UV and plastisol ink resistant. (Chromaline)
Magna/Cure UDC-2 Excellent definition and line edge Dual Cure Emulsion.Water, solvent, UV and plastisol ink resistant.(Chromaline)
DIAZOSP-300 Excellent resolution and detail. Prints Plastisol, Discharge & Water Base inks. (Murakami)
CP-2 Fast Exposing: Excellent line definition; durable yet easily reclaimable.(Chromaline)
CHEMICALS
SCREEN WASHER / INK DEGRADANTSINK BUSTER #1 4/1 Gallon • 5 Gallon • 55 GallonINK BUSTER #142 4/1 Gallon • 5 Gallon • 55 Gallon
RECLAIMERSSTRIP-EZE CRYSTALS 1 Lb. • 2 Lb. • 5 Lb.
M U R A K A M I
21
DISCONTINUED
22
DISCONTINUED
23
24
BEAN•e•doo®The cleaning power combined with the unique attributes of this screenwash makes it truly amazing! Tired of dealing with strong odors and corrosivechemicals of other screenwashes? It’s time for you to switch to BEAN•e•doo® for your screenwashing. BEAN•e•doo® is naturally made from 100%soybeans. It contains no dangerous vapors or odors to aggravate your senses while you work. Oops, get some on you hands? Don’t worry!BEAN•e•doo® won’t harm your skin and can be washed off with water. Since it is 100% biodegradable and non-toxic, you don’t have any disposalproblems to worry about. Stil l using mineral spirits to save money? Switch to BEAN•e•doo® and save even more.
SCREEN WASHES (55 gallon • 5 gallon • 1 gallon • quart)
GREENEWAY™
Any company that makes environmentally friendly products wouldn’t be worth its salt if it didn’t have at least one green product. And FranmarChemical is worth its salt and more! GREENEWAY™ is a biodegradable, non-hazardous solvent, ideal for replacing mineral spirits. It causes lesswear on emulsions and will not loosen tape. Best of all, a l ittle goes a long way. Mix 50/50 with water and clean most inks in large wash tanks. ForUV and air dry inks, use full strength.
Color Change™
Screen printers everywhere asked, “Frank, why don’t you make one of your ‘clean and simple’ safe products for quick on-press clean ups andcolor changes?” “Why not, indeed?” said Frank, and now this water rinseable, on-press solvent is available to make your life less complicated. Thisis another “less is better” product. An ounce of Color Change™ should handle the ink on a standard sized textile screen.
Wash•Away™
One of the many dreams we have at Franmar Chemical is to find an environmentally friendly solvent that will clean every ink a screenprinter mightuse. With Wash•Away™, we’re almost there! It cleans the full array of inks (but Bean•e•doo™ is sti l l the best for plastisols). This non-evaporativecleaner is great for recycling and/or wash tanks. You don’t have to say “tanks, guys,” just order Wash•Away™ to make your ink removal “clean andsimple.”
Strip•e•doo®Can you believe it? Some screenprinters don’t know that reclaiming screens used to be a back-breaking process. But then, they’venever used anything but Strip•e•doo® to reclaim screens! This biodegradable, non-caustic, non-toxic reclaimer and degreaser is justw hat the industry ordered. It’s fast acting, thick and stays in place as it breaks dow n the toughest of emulsions.
d-Haze®Our revolutionary d-Haze® not only gets rid of ghost images, it’s also the kiss of death to the cleaners that cause your eyes to burnand your skin and nose to become irritated. Speaking of images, imagine this... some of our customers tell us they are usingscreens that are over 10 years old - and because they use d-Haze®, those screens are like new ! Don’t let ghost images spook you,spook them right off your screen. Give’em d-Haze®. You see, at Franmar, making your job easier - the clean and simple w ay - is ourjob.
HAZE REMOVERS
QT. • 12 QTS. • 1GAL. • 6/1 GAL. • 5 GALLON • 55 GAL.
D-Grease™
You don’t have to be “corny” to see the benefit of using this degreaser made from distilled corn oil. Franmar D-Grease™ is a fastdrying surface cleaner that is ideal for removing any left-over cleaning solvents from your screen. Rinses clean w ith hot or coldw ater, and because you can retape right aw ay you’re back into production right aw ay. There’s nothing “corny” about that!
Ickee Stickee Unstuck®What screenprinter doesn’t know about that “ickee stickee” stuff that builds up on palettes, equipment and even the f loor? Well,that’s w hy there is Ickee Stickee Unstuck®! One little squirt of Ickee Stickee Unstuck® eliminates adhesive build up in a f lash. It’salso great for cleaning ink spills and spots on f loors and equipment. (We’ll let you in on a secret - w e even recommend it for grafittiremoval).
Scorch•e•doo™ [Scorch Remover] (QUARTS ONLY) • 12 QTS.Sometimes f lash cure units and dryers just can’t tell time w orth a hoot - leaving you hooting for sure! Our biodegradableScorch•e•doo™ w ill change those hoots to w histles as it removes the nasty old scorch marks and returns you and your textile to theprofessional level that all our customers possess.
PALLET CLEANER
QT. • 12 QTS. • 1GAL. • 6/1 GAL. • 5 GALLON • 55 GAL.
QT. • 12 QTS. • 1GAL. • 6/1 GAL. • 5 GALLON • 55 GAL.
QT.• 12 QTS. • 1GAL. • 6/1 GAL. • 5 GALLON • 55 GAL.
QT.• 12 QTS. • 1GAL. • 6/1 GAL. • 5 GALLON • 55 GAL.
QT.• 12 QTS. • 1GAL. • 6/1 GAL. • 5 GALLON • 55 GAL.
QT. • 12 QTS. • 1GAL. • 6/1 GAL. • 5 GALLON • 55 GAL.
QT. • 12 QTS. • 1GAL. • 6/1 GAL. • 5 GALLON • 55 GAL.
ONE STEP CLEAR 2 1/2 GAL. • 5 GAL. • 55 GAL.Franmar is excited to tell you of a new product - One Step Clear. This revolutionary product is in response to an increasing number of requests fromscreen printers to develop a product that can remove ink and emulsion in one simple, effective step. One Step Clear works great! In one screenprinting shop they cleaned 50 screens a week for eight weeks – all with only five gallons of concentrate. Not only is it super to use, it’s economical.
EMULSION REMOVERS
TEXTILE TRIAL KITTry our 6 product Trial Kit!• BEAN•e•doo® • Greeneway™• Strip•e•doo® • d-Haze®• d-Grease™ • Ickee Stickee Unstuck®FREE Training Video with purchase of Trial Kit!
SCREEN DEGREASERS
MISC. CLEANER
25
M U R A K A M I
26• PRE-STRETCHED WOOD & ALUMINUM FRAMES
• RE-STRETCH WOOD & ALUMINUM FRAMES
Size20x2423x3125x36
8119.4425.7538.74
11017.7422.7437.63
12518.2423.2438.56
15518.8123.8639.45
17319.4424.4940.35
30524.4428.8651.93
28023.1927.6146.57
23020.6925.7444.67
20020.0625.1144.61
35529.4436.3655.25
PRICING PER FRAMEALUMINUM FRAMES MESH COUNT
Size18X2020X2423X3125X36
8113.8115.3518.4722.71
11013.4814.5817.4222.71
12513.8115.3518.4724.16
15514.1316.2319.5325.94
17314.4616.7220.1626.70
30518.5322.3528.3132.60
28018.1721.8227.3431.49
23015.8318.5622.6930.25
20015.2117.2221.1827.46
35524.1228.3037.1447.83
WOOD FRAMES MESH COUNT
*Mesh Count 156ct and Higher are Yellow - Higher Counts are available in White upon request
Size20x2423x31
8112.3415.26
11011.2814.29
12511.5514.95
15512.0115.27
17312.4215.80
20012.8216.20
23013.2616.61
35525.2532.52
30518.2421.65
28016.0419.21
ALUMINUM FRAMES MESH COUNT
RE-STRETCH PRICING PER FRAME
*Mesh Count 156ct and Higher are Yellow - Higher Counts are available in White upon request.• Prices shown are for frames that have the mesh removed and are ready to be re-stretched.• Additional charge for sanding, removing mesh or excessive ink left on frames.• Customer must contact American-Niagara with frame sizes & mesh color for re-stretching.• Customer must contact American-Niagara to schedule pick up.• Customer pays freight to and from stretching facility.
Call Customer Service for Re-Stretch Form1-800-241-7708 • 770-441-5900
27
M-1 Cap MZX Manual M3 Automatic M6 Start-Up Kits
TENSION LOSS after printing is easily controlled. Quickly (30-60 secs.) rotate only one roller to retension andrestore your mesh to it’s original tension (Newtons) level; increasing your fabric life and gaining control ofprinting variables
NO NEED TO STORE FRAMES. Reduce your frames on hand, increase valuable shop space, and libraryonly your film and digital file.
INVEST YOUR MONEY. Like other capital equipment in your shop, Newman Roller Frames® are along-term investment engineered to last! In most cases, Newman Roller Frames® can be combined withlease purchases.SIZE DESCRIPTION TYPICAL PRESS
8.5”x12” OD(21.6 x 30.5 cm)10”x13” OD(25.4 x 33cm)7.25”x14” OD(18.4 x 35.6 cm)7.25”x14” OD(18.4 x 35.6 cm)7.25”x17” OD(18.4 x 43.2 cm)
with a 12” Ultra Thin Edge
with a 13” Ultra Thin Edge
with a 7.25” Sq. Bar & a 14” Thin Edge
with a 7.25” Sq. Bar & a 14” Thin Edge
with a 7.25” Sq. Bar & a 17” Thin Edge
Jennings and Lawson
Atlas and Antec
Hopkins Direct Drive
Hopkiins Hat Max cap attachment
Richardson
CUSTOM SIZES AVAILABLE
M-1 Roller Diameter: 1 1/16" (27mm)
Minimum Roller Length: 6" (152mm) OD
Maximum Roller Length: 20” (508mm) OD
SIZE DESCRIPTION
“18 X 20” ID (45.72 X 50.80cm18) with 3 rollers and an 18" Square Bar
“23 X 26”OD (58.42 X 66.04cm) with 3 ro llers and a 23" Square Bar
“23 X 28”OD (58.42 X 71.12cm) with 3 rollers and a 23" Square Bar
“23 X 31” OD (58.42 X 78.74cm) 4 Rol lers (Sq. Bar available at add ’l cost)
MZX Manual Textile Frame Standard Sizes
CUSTOM SIZES AVAILABLE
MZX Roller Diameter: 1 7/16" (37mm)
Minimum Roller Length: 12" (305mm) OD
Maximum Roller Length: 28" (711mm) OD
28M3 Automatic Textile Frame Standard Sizes
Category 1 M3/M3A “23 X 31” OD (58.42 X 78.74cm)
“25 X 31” OD (63.50 X 78.74cm)“23 X 30” OD (58.42 X 76.20cm)
Category 1A M3 “23 X 31” OD (58.42 X 78.74cm)
Category 2 M3/M3A “23 X 33” OD (58.42 X 83.82cm)“25 X 33” OD (63.50 X 83.82cm)“25 X 36” OD (63.50 X 91.44cm)“33 X 37” OD (58.42 X 93.98cm)
Category 3 M3A “30 X 40” OD (76.20 X 101.60cm)“31 X 42” OD (78.74 X 106.68cm)“33 X 42” OD (83.82 X 106.68cm)“33 X 45” OD (83.82 X 114.30cm)
* “A” designates reinforcement for additionalstrength and deflection reduction.
CUSTOM SIZES AVAILABLE FOR TEXTILE & GRAPHICSM3 Roller Diameter: 1 5/8" (41mm)Minimum Roller Length: 12" (305mm) ODMaximum Roller Length: 33" (838mm) OD
Category 4
CATEGORY MODEL SIZE
M6 Automatic Textile Frames Standard SizesM6/M6A SIZE
“47 X 51” OD (119.4X129.5cm)
“47 X 55” OD (119.4X139.7cm)
Category 5 M6A “50 X 52” OD (127X132.1cm)“55 X 62” OD (139.7X157.5cm)
CUSTOM SIZES AVAILABLE FOR TEXTILE & GRAPHICSM6 Roller Diameter: 2" (51mm)Minimum Roller Length: 15" (381mm) ODMaximum Roller Length: 55" (1397mm) ODM6A* Roller Diameter: 2" (51mm)Minimum Roller Length: 18" (457mm) ODMaximum Roller Length: 66" (1676mm) OD* “A” designates reinforcement for additional strength and deflection reduction.
ST-Meter 1E ST-Meter 2E
ST-Meter 1E - THE ACCURATE CHOICE!
29
Newman Squeegees & Flood Bars
• Eliminates squeegee length variations caused by sharpening and solventattack which changes the squeegee flex angle.
• NEVER sharpen another squeegee blade. Simply replace the tip whenneeded at 1/2 the cost of a conventional squeegee.
• Minimal squeegee pressure and angle adjustment are required with eachprint run since the squeegee dimension and flex angle are constant.
• Uniform ink film thickness is easily achieved.
• Improved color and print definition using less squeegee pressure.
• Unique design constantly rolls & mixes the ink keeping it fluid and smooth
• Reduces carding since the ink uniformly tracks down the frame.
• Reduction in ink climbing up the handle.
• Specially formulated urethane tips in various durometers will typically last 6months to 2 years.
• Easy clean up - no screws to trap ink
• All Newm an Flood Bars rotates the ink at high s peeds and injects i t into themesh orifices.
• As you raise screen tension, printing speed increases and print qualityimproves.
• Newman Flood Bars are individually precision machined to create flatnessand parallelism.
• All models are anodized for: greater wear resistance, ease of clean-up, andnick and wear tell-tale.
• The ends of the flood bars are precision feather radiused to prevent meshwear and tear.
Newman Flood BarsTM
Newman CONSTANT FORCE SqueegeeTM
30
SPRAY GLUES THAT WORKAT A GREAT PRICE!
PLATINUM• Unsurpassed Quality • Realistic Pricing
• VOC Compliant
tm
ALL PURPOSE SPRAY ADHESIVES
‘VOC COMPLIANT’
PLATINUMSPECIFY: WEB OR MIST
12 - 20 OZ. SIZE CANS
PERCASE OF12 CANS
tm
CURED PLASTISOL INK REMOVER• CONTAINS VIRGIN CHLORINATED SOLVENTS• REMOVES INK, GREASE, SOIL, OIL, LATEX, ETC.• REMOVES CURED PLASTISOL INKS• REMOVES MOST NON-FOOD STAINS FROM FABRIC• 100% NON-FLAMMABLE• CHLORINATED SOLVENT ODOR• TOXICITY - MAINTAIN BELOW T.L.V.• VERY FAST DRYER• DOES NOT REQUIRE AIR TESTING OUTSIDE U.S.A.
Premium Grade Solvent Blend
PACK & SHIPMENT INFORMATION:• 55 GALLON DRUMS • 5 GALLON PAILS • 4-1 GALLON CASES
Triple-Blend
HMIS (safety cod e 1-4)HEALTH 2 • FLAMMABILITY 1 • REACTIVITY 0 • PERSONAL PROTECTION BCOMPONENTS (inert and n on-hazardous compon ents are not su bject to rep ortin g and areconsidered as trade secrets)
Methylene chloride (dichloromethane) 75-09-2;Perchloroethylene (tetrachloroethylene) 127-18-4*note-special inhibiting package is not included because it is less than 1% of theformulation; non-hazardous ingredients are not listed as they are trade secrets accordingto 29CFR1910.1200. Also contains 1,2 butylene oxide and nitromethane less than 1%
55 GALLON DRUM
5 GALLON PAIL
4X1 GALLON CASE
31SPOT CLEANING STATION#80 Workhorse
BUILT-IN SPRAY GUN FOR STAINSVERY POWERFUL EXHAUSTUNIT 110 VOLT• 60 CYCLE AC 25 LBS.fully portable - exhaust fumes
PULL-OUT2STAIN REMOVER
Pack 12-20 ounce size cans/case
THIS PRODUCT REMOVES THE“RING” THAT SOMETIMESAPPEARS IN THE GARMENTAFTER THE INITIAL STAIN HASBEEN REMOVED!
STAIN-B-GONEA DEPENDABLE MEANS FORQUICKLY REMOVING STAINS SUCHAS GREASE, SOIL, OIL, TAR, GRIME,CRAYON, LIPSTICK, SHOE POLISH,BUTTER, ETC., FROM VARIOUSTYPES OF FABRICS ON MATTRESS,DRAPES, GARMENTS, ETC.
DOZEN
•POWERFUL SOLVENT•FAST DRYING•NON-FLAMMABLE•NON-OZONE DEPLETING• NET WT. 20 OZ. (1LB. 4 OZ.)• CAN SIZE 20 OZ. • 567 GRAMS
CURED PLASTISOL INK REMOVER
CONTAINS VIRGIN SOLVENTSREMOVES INK, GREASE, SOIL, OIL, LATEX, ETC.REMOVES CURED PLASTISOL INKSREMOVES MOST NON-FOOD STAINS FROM FABRICKETONE BASED SOLVENT BLENDKETONE SOLVENT ODORTOXICITY - MAINTAIN BELOW T.L.V.VERY FAST DRYERDOES NOT REQUIRE AIR TESTING OUTSIDE U.S.A.
55 GALLON DRUM
5 GALLON PAIL
4X1 GALLON CASE
P.C. SPECIAL
• 2 FREE GUNS WITH A DRUM• 1 FREE GUN WITH 4-5GALLON PAILS OR WITH• 5 CASES 4-1 GALLONS
HMIS HEALTH 2 • FLAMMABILITY 1• REACTIVITY 0• PERSONAL PROTECTION B
SILICONE SPRAYTEXTILE GRADE
REALLY SLICK STUFF16 OUNCE SIZE CAN
PER CASE OF 12 CANS kwik-kleenLiquid Stain Remover Solvent
Flammable for removing “stains” ofsoil, oil grease. Not for plastisol inks
55 gallon drum5 gallon pail
HMIS HEALTH 1 • FLAMMABILITY 3• REACTIVITY 0• PERSONAL PROTECTION B
ENVIRO-SOLV 2001CONTAINS NORMAL PROPYL BROMIDESOLVENT BASED• SOLD THROUGH DISTRIBUTORS• NON OZONE DEPLETOR• VERY FAST DRYER• HMIS CODE 1-0-0Replaces everything on the market forremoving grease, soil & oil stains. Evenworks in the removal of cured plastisol ink. 55 gal; 5 gal; 4-1 gal.
Enviro-Solv
Larger units are available on request
MAKES ANY SURFACE REALLY SLICK. CONCENTRATED SOTHAT CONSTANT APPLICATION IS NOT NECESSARY. GREATFOR ALL INDUSTRIES. SPECIALLY FORMULATED FOR GAR-MENT MILLS, SCREEN PRINTERS, ETC.
‘MUSCLE-POWER’ - shop wipesGREAT LEMON ODOR
POWERFUL WIPES6 TUBS PER CASE • 75 WIPES PER TUB
SIZE: 8” X 10”
VERY HIGH QUALITY PRODUCT!GENTLE ON THE HANDS
32
#01E - EQUIPPED WITH ADJUSTABLE
NOZZLE, DIRECT FEED UNIT FORDISPENSING FROM CONTAINER AND ANAIR ATTACHMENT. ALL THE WHISTLES!
#01D - EQUIPPED WITH ADJUSTABLE
NOZZLE AND DIRECT FEED UNIT FORDISPENSING FROM CONTAINER.
#01C - EQUIPPED WITH ADJUSTABLE
NOZZLE AND AIR ATTACHMENT FOR FASTDRYING OF FABRICS.
#01A - ALL MYSTIC GUNS ARE BASICALLY THE
SAME UNITS WITH DIFFERENT OPTION PACKAGES.THE #01A IS THE STANDARD UNIT. IT IS THE SECONDBEST SELLER AND SHOULD BE USED BY TEXTILEMILLS, ETC., WHERE AN ADJUSTABLE NOZZLE IS NOTMANDATORY.
#01B#1 SELLER, AS PICTURED.FEATURES ADJUSTABLENOZZLE. SAME GREAT GUNAS THE #01A. THE MOSTTRUSTED SPRAY GUN ONTHE MARKET!
MYSTIC tm TEXTILE CLEANING GUNSALL
METAL
HANDLE
MYSTICTM CLEANING GUN (TROUBLESHOOTING)
This tough, dependable and durable cleaning gun is designed to handle the strongest of solvents. Metal handle reduces risk of breaking if dropped. Factoryauthorized replacement parts and repair service readily available, usually within 48 hours, 110 Volt/6C Cycle A.C.
CAUTION: The gun builds up considerable pressure. Never point the gun at yourself or other persons, as this may cause injury.The Mystic Cleaning Gun is preset at the factory and adjustments are generally not required.
Remove the container, fi l l with fluid (about 2/3 full) and replace. Plug gun into a 11OV 60Hz outlet. Depress switch for 15- 20 seconds to prime pump. Spray fluidonto scrap fabric to remove oil fi lm from internal pump parts. MYSTIC Spray gun is now ready for use.
OPERATING INSTRUCTIONS1 ) THE ADJUSTING ROLLER ON TOP OF THE GUN controls the degree of atomization of fluid when not equipped with an adjustabIe nozzle. Approximate settingfor maximum pressure for texti le or screen cleaning is at a point where 1/ 8" clearance is visible between rear of air intake and forward extremity of housing (#1 ).The set screw (#24) on the left- hand side of the barrel must be removed BEFORE attempting to move the ADJUSTING ROLLER.
2) VOLUME CONTROL KNOB AT REAR OF GUN controls the volume of fluid dispensed. For texti le cleaning, turn button as far left as possible; then, back to right 1/2 to 1 revolution. Once adjustments are made to satisfactory pressure and volume setting; it is not generally necessary to change them.
TROUBLE SHOOTING MINOR MECHANICAL PROBLEMSSome of the cleaning guns returned for repairs are found to be out of adjustment at the adjustable roller or volume control; or, have simply had minor mechanicaldifficulties which could have been easily taken care of by plant electricians. Some troubleshooting problems and causes are listed below:1) FLUID LEAKAGEIt is necessary that all parts, particularly the nozzle head, be tight to prevent fluid working its way through the screws threads. Cleaning should also be done at anangle no greater than 45o to prevent leakage from the air hole at the top of the gun. Leakage will also occur at the screw threads of the container cup if it is ti ltedforward for an extended period.2) LACK OF PRESSUREThe primary cause of lack of pressure occurs when the suction tube set screw, and nozzle head are not tight and the unit is sucking air. Blockage in the pump unitor nozzle and weak/damaged springs in the pump assembly are also a cause of low pressure. A lack of pressure will also occur when the primer is lost due toexcessive ti lting of the gun.3) OPERATION WITHOUT FLUIDIt is highly recommended that this unit not be operated empty since undue wear and strain is caused on all working parts. Continued use of an empty gun wiIl surelycause breakage of parts and needless repairs.4) LUBRICATIONThe gun should not be over -lubricated. One or two drops of l ight machine oil used daily is sufficient to keep the pump unit in working condition. For storage ordiscontinued use, it is recommended that a l ight machine oil be pumped through the gun in the same manner as cleaning fluids for a period of 2 to 3 seconds. Forstart- up, cleaning fluid should be run through the unit prior to putting it into operation so that any oily fi lms might be pumped through the unit and flushed out.
REPAIR PARTS AND MAJOR GUN REPAIRSNormally, any repairs which are needed to the guns are minor in nature and we suggest that they be examined by the company electrician for apparent minormalfunctions. This inspection will probably involve disassembly of the pump unit and perhaps removal of the housing cover for examination. In practically all cases,these minor repairs can be made quickly without significant loss of time from operation. Should there be obviously damaged parts which must be replaced, saidparts should be ordered from AMERICAN NIAGARA directly by number taken from the parts l ist supplied in the instruction sheet. Use only parts manufactured forand distributed by AMERICAN NIAGARA.
33
GLOVESDISPOSABLESIZES • 100 PER BOX10 BOXES PER CASESMALLMEDIUMLARGE
EXCELLENT REPLA CEMENT FOR SOLVENT BASED ADHE-SIVES. DRIES VERY QUICKLY.MADE TO BE DISPENSED THROUGH A SPRAY SYSTEM.55 GAL. DRUMS 1 GAL. CAN5 GAL. PAIL 4-1 GAL. CASE
ENVIRO-TACK4000
BULK SPRAY ADHESIVEWATER BASED
FAST DRYING AND WILLREALLY STICK WITH YOU
#80004 OZ. HEAVYWEIGHT • WHITE ONLY • 500 PER CASE
SHOW OFFS • #6000
WHITE • HEAVYWEIGHT FLASH GRADE • 500 PER CASESIZES14X1414X1615X1816X1818X22
SHOW OFFS • #6010
BLACK • HEAVYWEIGHT FLASH GRADE • 500 PER CASESIZES14X1414X1615X1816X1818X22
SIZES14X1416X1818X22
WHITE
BLACK
WHITE
TEE SQUARESREGISTRATIONTEST SQUARES
TEE WIPES #207”X14” - APPROX. 2,000 PER CASE
20 POUND CASE
#6969WIPES13”X13” - 1/4 FOLD - 900 PER CASE
Aluminum Screen
Coaters
GoopScoops EACH PRICE
12 PER BOX
KWIK-FRAME 2 PART ADHESIVEbonds mesh fabric towood or metal frameseach kit consists of:1 - 16 oz. GLUE • 1 - 8 oz.ACTIVATOR •1 - SQUEEGEE
PER KIT
Scrub PadRED PAD WITH HANDLE
E-Z CHEMLOW ODOR
SCREENOPENERFAST ACTING
20 OUNCE SIZE CAN
PER CASE OF 12 CANS
squeegees65, 75, 85 & TripleDurometerSQUEEGEE BLADE ONLY
SOLD PER INCH
65, 75, 85 DurometerSQUEEGEE COMPLETE
SOLD PER INCH
34Blue Blockout Tape
VELLUM FILM
LASER FILM100 sheets per package8 1/2 x 118 1/2 x 1411 x 1411 x 1712 x 1813 x 19custom sizes available
Never clean your platens again! Savehours of messy and unhealthy cleaningwith solvents. Cover your clean platenswith Protek Pallet Tape, then when thebuild-up of lint and adhesive becomesexcessive, simply peel off and replace.
2" x 36 yards / 36 rolls per case
- Self wound polyethylene with anaggressive adhesive. Resists attacks byinks and solvents. Conformable & easyto apply. Clean removable from woodframes & mesh with no adhesive residue.Withstands multiple pressure washes &solvent baths. The perfect tape for longruns on both wood and aluminumscreens.
3" x 36 yards / 24 rolls per case
PALLET TAPE
18" x 100 yards 2 rolls per case
24" x 100 yards 2 rolls per case
INK-JET FILM
8 1/2” x 11” Waterproof Film (packs of 100)8 1/2” x 14” Waterproof Film (packs of 100)11”x17” Waterproof Film (packs of 100)13”x19” Waterproof Film (packs of 100)17”x100’ Waterproof Film (17”x100’ roll)24”x100’ Waterproof Film (24”x100’ roll)42”x100’ Waterproof Film (42”x100’ roll)
For Pigment or Dye-Based Systems
NEWMAN ROLLER TAPES
FLEX TAPE3”x 60 yds. / 24 rolls per case
BLOCK TAPE(BLOCK-OUT TAPE)2” x 60 yds. / 36 rolls per case3” x 60 yds. / 24 rolls per case
YELLOW MESH PROTECTION TAPE2” x 60 yds. / 24 rolls per case3” x 60 yds. / 18 rolls per case
• Leaves no residue• Applies quickly• Removes quickly & cleanly
250 sheets per package8 1/2 x 118 1/2 x 1411 x 1713 x 19custom sizes available
35
1. 31” Wall Rack + 100 Screen PrintFiles + A-Z Tabs = $434
2. 31” Wall Rack + 70 CollectiveFiles + A-Z Tabs = $531
3. 31” Wall Rack + 200Files + A-Z Tabs = $474
1 each 15” D Floor Rack with 4” levels + 100 Screen Print Files + A-Z Tabs = $1,056
1 each 15” D Floor Rack with 4” levels + 70 Collective Files + A-Z Tabs = $1,153
CALL 1-800-241-7708
36
KDL Blackline’s KDL is the original UPS-
shippable washout booth. Full size and made of1/4-inch, semi-transparent naturalpolypropylene, the KDL is strong, durable andbuilt to give you years of service. It can hold astandard 23” x 31” screen and comes standardwith t wo screen supports. An d because t he KDLis semi-transparent, backlighting can be added bythe customer if so desired.
So if you’re looking for an entry-level washoutbooth that will grow with y our business andsave you on freight costs, Blackline’s KD seriesof sinks are the perfect fit .
Measures 32”W x 24”L x 64”H
KDL Standard Features
Welded main pan Locking side and back panels Built-in screen supports 1/4-inch natural polypro construction Easy to backlight
WASHOUT BOOTHSCLEAN AND RECLAIM
WDX A washout booth is the foundation of an
efficient clean-room, and the WDX is Blackline’s top-of-the-line washout. Constructed of easy-to-clean,welded polypropylene, the WDX series (WDX36shown) is precision built and features options likebuilt-in screen supports, scrubber hooks, a full ceilingand splash guards to help m inimize overspray. A fullybacklit , semi-transparent polypro back panel makesfor easy screen viewing, and the perforated drainprevents tape from clogging the waste system.
The WDX comes standard in 36”, 48”, 60”, 72” and96” widths.
Measures 24"L x (chosen width) x 74"H
44-inch interior box height
Optional 30-inch box available
Custom sizes available
WDX Standard Features
Full Ceiling Splash guards Pressure washer wand support Hooks for hanging scrubbers Backlighting AirLectric foot switch Built-in screen supports
FILTRATION / RECIRCINK REMOVAL SYSTEMS
DIPTANKSQUICK SCREEN CLEANING & RECLAIMING
The SuperTrap is designed to turn
your washout booth into an ink removal station.Think of it as a scaled down, under-sink version ofthe DS or D2, with a 15-gallon recirculation systemis that can be easily plumbed to any of Blackline’swashouts. Once installed, the ST traps and filters inksludge and recirculates cleaning solvents, allowingthem to be reused many times over, saving both timeand money.
SuperTraps are especially useful for shops printinglarge format screens that don’t fit into standard sizeink removal units. Simply slide a SuperTrapunderneath your oversized washout to transform itinto a complete ink removal station.
The SuperTrap comes complete with pump, filtercartridge, filter, foot switch, hose and spray nozzle.
Larger sizes available
Replacement filters available
SuperTrap Standard Features
Chemical pump One filter cartridge One spun polypropylene filter AirLectric foot switch Chemically resistant hoses and fitt ings
15 gallon capacity
LARGE DIP TANKDip tanks have enjoyed a huge success sincebeing introduced several years ago due to theirability to quickly and easily remove ink andemulsion when used in conjunction with thenew one-step cleaners on the market.
Blackline’s large dip tank is built of 3/8" weldedpolypropylen e and holds up to six standard sizescreens. It ships UPS and comes standard with ascreen hold down and a lid to minimize solventevaporation when the system is not in use.Custom sizes available.
Measures 36" x 10" x 29"
Screen Dip Tank Features
3/8-inch welded polypropyleneconstruction Six standard-size-screen capacity Comes with screen hold down,suppor t rings an d lid Spigot for easy draining
37SATURN RACKCOMPANYRollin’ Screen Racker
For Improved Screen Handling
The Rollin’ Screen Racker provides asafe place for drying and storingscreens with the convenience ofmobility.
Safe Drying and Storage Efficient Adjustable Width Mobile UPS (RSR31)
Width Adjustment Ranges Specifications
Model Range
RSR31 15” - 26”
RSR31B 25” - 36”
RSR31C 35” - 46”
RSR40 15” - 26”
RSR40B 25” - 36”
RSR40C 35” - 46”
RSR31 RSR40
Depth 31” 40”
Number of Shelves Ships Via 20 UPS 25 Truck
The Racker DryingCloset provides an efficient methodfor drying screens in a safe and effectiveenvironment. The Closet easilyaccommodates a Rollin’ Screen Rackerwith screens.
With the door closed, screens areprotected from light and dust. HighCFM volume fans pull outside airthrough a filter and across a heater. Theheater warms the air (up to 105oF) thenpushes it down the open side chamberand then through strategically placedholes across the screens for fast drying.
The Cover protects five sides from light anddust. Two zippers open one side allowingaccess to the screens. This accommodatesscreens ready for exposure
The Rollin’ Screen Kart provides a place foreverything necessary for a particular job. Youcan organize all the screens, ink, squeegees,spray tack, wipes, etc. in one convenient place.This will help organize your shop and keep itcleaner and more productive. The Rollin’ ScreenKart features adjustable width, easilyaccommodating screens of varying widths. The31" deep shelf can support any length screen.The optional Top easily accommodates all thesupplies for a job.
Rollin’ Screen Kart
Racker Cover
38
SERILOR® SR1 &SERILOR®SR3 -Universal color codedsqueegee blades.Available in most colors,profiles and dimensions insingle, double and tripledurometer.
SERILOR®HR1 &SERILOR®HR3 - Highresistance squeegees : foruse with industrial & UVinks that require optimalabarsion & chemicalresistance. Available inwhite color, in mostprofiles and dimensions,in single, double & tripledurometer.
SERILOR® CERAM
High Resistancesqueegees in durometersranging from 35 to 55sh asneeded for the directprinting of ceramics ortiles. Also available withsoft core and 75shA edgesfor curved substrates(CERAM3)
SERILOR® CD
For optical media printing,packed in convenient readyto use pre-cut sizes. Theseblades offer 4 sharp cutedges for precisionprinting. Various sizes insingle, double and tripledurometer are available.
SERILOR® TEXAn economical bladefor use with nonaggressive inks such aswater based andplastisol textile inks.Available in thecommon sizes andhardnesses used fortextile printing.
SERILOR® HR5Designed for hightolerance and specialtyprinting: 5 layers of softand hard highresistance polyurethaneoffer both rigidity forprecision printing andsoftness to absorbvibrations. Available ingraphic dimensions onlywith several elasticitymodulus and printingedge hardness
SERILOR® MR
Molded edgesqueegees by Fimor:radius edge moldedblades for applicationsrequiring a smoother orthicker ink deposit.Available for a limitednumber of references,please contact us.
The most famous endurancecar racing event in the world,and FIMOR the leadingmanufacturer of squeegeessold in over 80 countries areboth based in Le Mans; morethan a coincidence!
SERILOR® FGFimor’s high resistance(HR Series)polyurethane is nowavailable with afiberglass backing. Foruse with cylinderpresses and other fastprecision printingequipment requiringmore squeegee ridgity.Development productavailable in limitedsizes.
39
SERILOR® DIAMOND X-2 &DIAMOND X-2 TRONIC
Special Order Only! Advanced,automatic, large format sharpenersusing integrated dual grit diamondwheel technology. Models up to 3meters (120 inches) include easy backloading and heavy duty design.
DIAMOND® X-2 TRONIC
Includes fully automatic cycles &programmable adjustments.
Pneumatically driven squeegee cleanerfor safety on the production floor.Contains 8L (2 gal) of a cleaningchemical of your choice. Can be usedconveniently in the workplace toimprove productivity and H&Smanagement. Ideal for shops usingmultiple stations in small and mediumformats.
SERILOR® BLADE RUNNERSqueegee washer
SERILOR® HAND
Gold anodized squeegeeholders for manualprinting. Adapts to varioussqueegee sizes with noglue. Stiff, light, easy tomaintain for the life longuse.
SERILOR® AS
Conductive polyurethaneto help reduce staticproblems in screenprinting. Developmentproduct available as aspecial only
SERILOR® PROFILES
P1:Double bevel + flat landP2:Single bevel+flat landP5:Double bevel (V type)D :Diamond square profile
SERILOR®Diamond Fine
Surpasses all othermanual devices forconsistent polishingof both squeegeeedgessimultaneously.Prevents strikesand early wear.
SERILOR®CLIPPER
Convenient tool forsafely roundingsqueegee corners toprevent mesh wear.
SERILOR® CUT
Convenient tools forsafely and cleanlycutting squeegee tolength, reducingoccupationalhazards andimproving handlingof PU blades
SERILOR® MAXITRONICSERILOR® KUTSERILOR® KUTRONIC
Affordable manual and automatic highprecision large format sharpenersusing diamond wheel technology.Models up to over 35 meters (138inches). Over 1000 diamondsharpeners sold worldwide.
SERILOR® SHORT CUTSERILOR® MAXI
Entry level, high precision diamondwheel sharpeners. No extraconsumables needed. Low cost withexcellent performance for small formatsharpening (from 51 cm / 20” up to 97cm / 38”)
SERILOR® MACH
Gold anodizedsqueegee holders forprinting presses. 3models and 2 heightsfit all squeegee sizesand replace OEMmodels at a greatvalue.
40
Athletic Numbering V-1000 Entry LevelPresses & Accessories
Infrared Conveyor Dryers
Flash Cure Units Ultraviolet & Metal HalideExposing Units
Entry LevelUV Exposing Units
Screen Drying Cabinets
VRS PINRegistration System
Heat Presses Washout Booths Complete Shops
Vastex Screen Printing Equipment - Screen Printing Equipment Built to Last a Lifetime!
For further information, please contact:
Customer Service 800-241-7708
Products
V-2000 Premium& Presses Accessories
Complete Screen Printing Shop Packages Available
41
FALCON M SERIESAUTOMATIC TEXTILE MACHINE
FALCON E SERIESEXPERTISE WITH EASE
FREEDOM
PNEUMATIC MACHINESAFFORDABLE RELIABLE
JAVELINModels 6, 8 or 10 ColorPrint Area 16” x 18”
Index Speed up to 800/hr
Models 6 ColorPrint Area 16” x 18”
Index Speed up to 400/hr• Microprocessor Control• Quick-Change Pneumatic Screen Slamps• Quick-Change Squeegee• Micro-Registration & Adjustable Stroke Length• Time or Foot Pedal Coontrolled Indexing• Easy View Registration Lamp
FREEDOM & JAVELINStandard Features
FLASHBACK
Pur patented technology allowsyou to print, flash and cool atthe same station.
PLUG N GO
Included with the purchase of aFalcon
Models available in 10 and 12ColorPrint Area 18” x 18”
Index Speed up to 1000/hr
• Models: 10, 12, 12, 16 and20 Color• Print Area: 20 x 28• First Choice in FactoryAutomation• Models: All-Over ColorPrinting with Duplex
FALCON DUPLEXThe Rage is back for All-OverPrinted Garments!
42
Vacupallet
Pallets Gripper
Mercury Flash Cap Max
Compact InfraredDryer
DRYERS Increase Production and SAVE UP TO $800
PRODUCTS
POWERHOUSE 2608 - 20 Dz/Hr
Thermo Gun
Wash-ItLumitronWorkhorse6 station 6 color
POWERHOUSE 5217100 Dz/Hr
POWERHOUSE 4013 - 65 Dz/HrPOWERHOUSE3011 - 35 Dz/Hr
With this package you can:• Produce the Higher Volume Jobs• Print Dark Color Garments Faster and LessExpensively• Print Large Format Images• Produce Team Sports Apparel• Print Sweats, Athletic Wear & Hoodies• Print Long Pant Legs and Sleeves• Print Nylon Jackets• Print Baseball & Sports Caps
Print many non-textiles too:• Print Corroplast & Metal Signs for Real Estate &Political Campaigns• Print Trophies, Plaques & Awards• Print Bumper Stickers & Window Decals• Print Industrial Items like Control Panels and MeterCovers
Photo Sharp Metal-Halide / PointLight Screen Exposure Unit