SYSTEM INCLUDES:
Cage Mounted Spray Manifolds
Water Pumps
Water Filter
Water Storage / Re-circulation Tank
PLC Controlled
High Velocity Air Knife
Portable Wash Station
WHY CLEAN?
Convey ing Exce l lence Wor ldw ide
Seems like a simple question on the surface,
but if one delves deeper into cleaning
fundamentals, one can start to see the need for
a systematic, trouble free cleaning approach.
This is a primary goal for any food processing
plant. However, this objective is not always
easy to achieve. The proper selection of
cleaning equipment is critical to get the job
done; this is where G&F Systems comes in.
G&F Systems offers a variety of cleaning
solutions for your spiral conveyor system aimed
at removing grime and contaminates from your
process equipment, minimizing your cleaning
costs, and reducing your cleaning time.
CIP Sanitation System
G&F SYSTEMSCORPORATE HEADQUARTERS:208 Babylon Tpke
Roosevelt NY 11575
tel. 516 868-4923
fax. 516 868-4968
www.gfsystems.com
For your Ambien t Coo le r, Re f r ige ra ted Coo le r, F reezer o r Proo fe r
G&F Systems incorporates a systematic
approach to the cleaning process from soaking
- rinsing - spraying - foaming – high pressure.
G&F will have your process equipment clean
and ready for production in as little time as
possible.
G&F Systems offers custom made conveyor
belt wash stations with varying levels of
performance, from portable wash units for
cleaning on the go to partial or full Spiral
Conveyor CIP (Clean in Place) systems
designed to clean your spiral and spiral
enclosure.
MADE IN USAAll parts made
in the USA
Clean in place system for your spiral
Cleans the “hard to reach”
framework and belt of your spiral system
from the inside-out
Spiral Frame & Cage Water Sprays
Advantages of incorporating a G&F cleaning system into your process:
Convey ing Exce l lence Wor ldw ide
G&F SYSTEMSCORPORATE HEADQUARTERS:208 Babylon Tpke
Roosevelt NY 11575
tel. 516 868-4923
fax. 516 868-4968
www.gfsystems.com
MADE IN USAAll parts made
in the USA
TIER 1
Which G&F Systems “clean design” is best for your process?
TIER 2
• Safety; operators are not directly tasked with the cleaning process
• Difficult to access areas can be cleaned
• Production down time between product runs is reduced
• Cleaning costs can be reduced substantially
• Water consumption is reduced as cleaning cycles are designed to use the
optimum quantity of water
• The cleaning system can be fully automated therefore reducing labor
requirements
• PLC Controlled
CIP Sanitation System Clean in place system for your spiral
TIER 3
For your Ambien t Coo le r, Re f r ige ra ted Coo le r, F reezer o r Proo fe r
The rinse chamber includes a stainless steel manifold with spray nozzles and is pitched to drain during operation.
Stainless Steel construction consisting of a 2 chamber design with single pump.
Stainless Steel construction consisting of a 3 chamber design with dual pumps.