1
DRENCH PUMP J132 The drench pump you purchased will need some periodic maintenance after use. The pump should be cleaned after each use by pumping a mild detergent and warm water through the unit. The most common problem is the pump starts to leak, or stick and not slide easily. We recommend using our silicone lubricant item # J111S. You will need to lubricate both the felt washer and the 0-rings. If this does not solve the problem you may need to replace the washer and / or the 0-rings. The diagram below should help you in identifying the various parts and their item num- bers for easy assembly or parts replacement. piston barrel housing handle piston rod head assembly J132D5 J132D6 bottom J132D3 J132D4 & nipple port J132D9 J132D11 felt washer rubber 0-ring brass ball J132D1 J132D2 J132D14 lock ring metal washer small rubber J132D12 J132D13 0-ring J132D2S big brass ball J132D14 For more technical support call 800-525-5614 ext. 213. Jorgensen Laboratories 1450 N. Van Buren Ave. Loveland, CO 80538
