Magnetic Contact Guide - Honeywell & CUSTOM ELECTRONICS Magnetic Contact Guide Honeywell Security &...

SECURITY & CUSTOM ELECTRONICS

Magnetic Contact GuideHoneywell Security & Custom ElectronicsHoneywell165 Eileen WayP.O. Box 9035Syosset, NY 11791Tel: 800.467.5875www.honeywell.com/security

L/MICATCON/DNovember 2005© 2005 Honeywell International Inc.

Table of Contents

1

Surface Mount Contacts .... 2-27

Recessed Contacts ............ 28-57

Commercial Contacts ........ 58-77

V-Plex Contacts .................. 78-89

Glossary ................................ 106-107

Conversion Chart .................. 108

Tamper Loop Contacts .......... 90-105

IN05013_MiniCat_rev1.qxd 11/7/05 12:14 PM Page 1

2

Ammo Box

Honeywell’s unique Ammo Boxpackaging provides securityprofessionals with an entirely newlevel of installation convenienceand inventory control. Each AmmoBox contains an “ammo belt” of 50individually packaged magneticcontacts complete with screws,spacers and covers. Simply tear offthe perforated, incrementallynumbered bag. The number on thenext bag indicates the quantity left inthe Ammo Box.

Ammo boxes not only eliminate thefrustration of digging through looseparts or sorting through mismatchedsets—they make purchasing contactssimple. You can select the exactamount required for an individualinstallation or purchase the ultra-convenient Ammo Box of 50.

Look for contacts featuring the“Available in Ammo Box” symbolthroughout this catalog!

Available inAmmo Box

Featured Product


3

Ammo BoxMagnetic Contacts

• 50 individually packaged contacts per Ammo Box

• Perforated bags let you take only as many as needed

• Each bag contains all needed parts,including screws, spacers, etc.

• Sequential numbers on bag tell you how many are left in the box

50


Surface Mount

• Ideal for residential or commercial use

• Standard gap: 1-1/4" (32mm)

• Spacers, covers and screws included

7939WGMagnetic Contact

Available inAmmo BoxAvailable inAmmo Box

ORDERING:

7939WG-WH – White7939WG-BR – Brown7939WG-GY – Grey7939WG-WH-M – Extra magnet (10 pack)7939WG-BR-M – Extra magnet (10 pack)7939WG-GY-M – Extra magnet (10 pack)

4


REPLACES:

• ADEMCO PR20439, 7939, 7939W

• Aleph DC2541, DC2541-WG

• FBII ZR735

• GRI 29A

• Intellisense MPS20

• Nascom N-85T

• Sentrol 1085T, 1285T

• Tane SM35

SPECIFICATIONS:

Switch Type: Form A (SPST) ReedContact Rating: 300ma @ 30VDC

5

2.10


Surface Mount

• SPDT (Form C) Contact

• Standard gap: 1" (25mm)

• Spaces, covers and screws included

• Cover conceals end of line resistor (EOL)

7939-2Magnetic Contact

ORDERING:

7939-2WH – White7939-2BR – Brown7939-2GY – Grey7939WH-M – Extra magnet (10 pack)7939BR-M – Extra magnet (10 pack)7939GY-M – Extra magnet (10 pack)

6


SPECIFICATIONS:

Switch Type: Form C (SPDT) ReedContact Rating: 100ma @ 28VDC

7

.63

.51

.49

2.10

2.552.55

REPLACES:

• GRI 29C

• Sentrol 1087T


Surface Mount

• The most versatile mounting optionsof any contact available – screwmount, adhesive mount or recess

• Super wide gap of 2" (51mm) isstandard or 1" (25mm) end-to-endrecessed

• Insulation displacement terminalseliminate stripping or soldering, justinsert wires and tighten

• Recess adapter plugs included

7940Universal Magnetic Contact


ORDERING:

7940WH – White7940BR – Brown7940WH-M– Extra magnet (10 pack)7940BR-M – Extra magnet (10 pack)

8


REPLACES:

• Amseco AMS51

• Sentrol 1038T, 1038-M, 1082TW-M,

1285TW-N

• Tane-50

SPECIFICATIONS:


9

.751.75

.40

.50

Patent # 5,476,397


Surface Mount


• 12" (30cm) leads

• Self-adhesive or screw mount

943WGMini Magnetic Contact

ORDERING:

943WG-WH – White943WG-BR – Brown943WG-WH-M– Extra magnet (10 pack)943WG-BR-M– Extra magnet (10 pack)

10



REPLACES:

• ADEMCO PR20443, 943

• Aleph DC-1561, DC-1551-WG

• GRI 50F-12

• Intellisense MPS45

• Nascom N25

• Sentrol 1145, 1032, 1035

SPECIFICATIONS:


11

1.10

.76.50

.25


Surface Mount

• Screw mount or adhesive mount

• Screw terminals eliminate wire splicing and soldering


945TMiniature Magnetic Contact

with Screw Terminals


ORDERING:

945T-WH – White945T-BR – Brown945T-GY– Grey945WH-M– Extra magnet (10 pack)945BR-M– Extra magnet (10 pack)945GY-M– Extra magnet (10 pack)

12


REPLACES:

• Aleph DC-2531-WG

• GRI 100T, 110T


• Tane-60

SPECIFICATIONS:


13

.375

2.00

.35

1.75


14

PAL-T

There’s a reason why Honeywell’sPAL-T contacts are so popular.Convenience. The revolutionary, one-piece mini surface mount contactfeatures a patented hinged cover thateliminates the hassle of loose parts.Installations are as simple asmounting, wiring, and snapping thecase closed!

Despite its small size, the UL, ULCand CE listed PAL-T contact featuresa 1-1/8" gap—reducing false alarmswhile speeding up installation time.

Featured Product


15

PAL-THoneywell Exclusive

Patent # 6,135,826


Surface Mount

• Patented hinged case cover–no loose parts

• Concealed screw terminals eliminatesplicing and soldering

• 1-1/8" (29mm) gap makes installation a snap

• Screw mount or adhesive mount• Six wire entry points for mounting versatility • Conceals EOL resistor

PAL-TMagnetic Contact


ORDERING:

PAL-T-WH – White PAL-T-BR – Brown PAL-T-GY – GreyPAL-WH – With 5' leads (5 pack)PAL-M-WH– Extra magnet (10 pack)PAL-M-BR – Extra magnet (10 pack)

16


REPLACES:

• Aleph DC-2531

• GRI 100T, 100TC, 110T

• Sentrol 1038T

• Tane-60

SPECIFICATIONS:


17

2.10

.47

.43

Patent # 6,135,826


Surface Mount

• Miniature size perfect for homes and offices

• Attractive cover keeps mountingscrews and terminals screws hidden

• Standard gap: 3/4" (19mm)

• Complete with spacers and mounting screws

• Cover hides EOL resistor

940Magnetic Contact


ORDERING:

940WH – White940BR – Brown940WH-M – Extra magnet (10 pack)940BR-M– Extra magnet (10 pack)

18


REPLACES:

• Aleph PS-1523

• GRI 29A, 129A

• Nascom N285T


SPECIFICATIONS:


19

.51

1.60

.47


Surface Mount

• Completely hides mounting screwsand terminals


• Ideal for concealing end-of-line resistor (EOL)

950Magnetic Contact

ORDERING:

950BR – Brown950GY– Grey950W-BR – Brown: wide-gap 2-1/4"(57mm)950W-GY– Grey: wide-gap 2-1/4"(57mm)

20


SPECIFICATIONS:


21

4.13

.62

.64

REPLACES:

• GRI 400

• Sentrol 1045T


Surface Mount

• Adhesive mount


• External test points standard

• 15 ft. leads (4.6m)

• Package Quantity 5 per bag

945Adhesive Mount Magnetic Contact

ORDERING:

945WH – White945BR – Brown945WH-M– Extra magnet (10 pack)945BR-M– Extra magnet (10 pack)

22


REPLACES:

• Aleph PS1541

• GRI 100-12, 110-12

• Nascom N35

• Sentrol 1035

• Tane FM106

SPECIFICATIONS:


23

1.54

.37

.44


Surface Mount

• Screw or adhesive mount

• 18" (46 cm) long wire leads

• Adhesive pads are pre-applied for fasteasy installation – they do not need notbe removed for screw mounting


PR-20445Magnetic Contact with Leads

ORDERING:

PR-20445WH – WhitePR-20445BR – BrownPR-20445WH-M – Extra magnet (10 pack)PR-20445BR-M – Extra magnet (10 pack)

24


REPLACES:

• Aleph PS1541

• GRI 110-12

• Nascom N35

• Sentrol 1082-N, 1085

• Tane FM106

SPECIFICATIONS:


25

2.16

.42

.36


Surface Mount

• Screw mount

• External test points standard


• Complete with spacers and mounting screws

949Magnetic Contact with Leads

ORDERING:

949WH – White949BR – Brown

26


SPECIFICATIONS:


27

2.16

.36

.42

REPLACES:

• Aleph PS1541

• GRI 100-12

• Nascom N35

• Sentrol 1035-N, 1085, 1085-M, 1085-N

• Tane FM106


28

Recessed

28

Truly one-of-a-kind, Honeywell’sStaggered T Series contacts provideyou with a whole new level ofconvenience and flexibility. Bystaggering the terminals, wediscovered a way to fit larger screwterminals without altering theindustry-standard 3/8" diameter casesize–and without having to use anyspecial screwdrivers. The result?Easier wiring and faster installations.

The innovative design eliminatessplicing and soldering, and no specialscrewdrivers are required. It’s theindustry standard-sized contact fromthe company with the higheststandards in the industry.

Recessed contacts that featureStaggered T terminals begin on page 46.

Featured Product


29

Staggered THoneywell Exclusive

• Staggered T Terminals ensure a secure electrical connection

• Innovative design makes installation simple

29


Recessed

• With a 3/4" long magnet, the 951WG is ideal for casementwindows, sliding windows, and otherthin frame applications

• Standard gap: 1-1/4"– the largestgap of any mini 3/8" contact

• 12" leads are standard

951WG3/8" Diameter Miniature Press

Fit Magnetic Contact


ORDERING:

951WG-WH – White951WG-BR – Brown951WG-WH-M – Extra magnet (10 pack)951WG-BR-M– Extra magnet (10 pack)

30


REPLACES:

• ADEMCO PR20451, 944, PR20411, 951, PRO51SP

• Aleph DC-1651, PS-1650, DC-1621-WG

• FBII ZR755R, ZR715R

• Intellisense, MPS9

• GRI 5065, 20RS-12

• Nascom N-175N

• Sentrol 1125

• Tane STB-10, mini-10, TAP-10

SPECIFICATIONS:


31

.375

.85

.44


Recessed

• Stubby 3/8" press fit with buttonmagnet fits even the tightest spots

• Powerful rare earth magnet is easy to install with screw or adhesive


• Magnet screw hole is convex forsmooth flush fit

PRO51BTM3/8" Stubby Recessed Contactwith Rare Earth Button Magnet

ORDERING:

PRO51BTM-WH – WhitePROBTM – 10 pack button magnets

32


REPLACES:

• GRI N-20RS-12

• Sentrol R-1125

• Tane STB-10DM, Mini-10WG, ATB-10WG

SPECIFICATIONS:


33

.85

.44

.375

.05


Recessed

• Standard gap: 1-1⁄4" (32mm)

• 12" (30cm) leads

• Adhesive mounting tape on magnet

MPS99WG3/8" Stubby Contact

with Flat Magnet

ORDERING:

MPS99WGW – WhiteMPS99WGB – Brown

34


REPLACES:

• GRI 5065, 5088, 5088RS

• Sentrol R-1125

SPECIFICATIONS:


35

.44

.85 .87

.125

.88

.375


Recessed


• 12" (30cm) leads

MPS95WG3/8" Stubby Contact

with 1⁄4" Magnet

ORDERING:


36


REPLACES:

• GRI 50-RFIZ

SPECIFICATIONS:


37

.85

.375

.44

1.18

.25


Recessed

• 1/4" diameter press fit


• 18" (46cm) long wire leads

PR-20421Press Fit Magnetic Contact

ORDERING:

PR20421 – White941WH – White with 5' leads941M– Extra 1/4" bare magnet

38


SPECIFICATIONS:


39

.29

1.90

1.15

.25

REPLACES:

• ADEMCO MPS5

• Aleph DC-1611, DC-1631

• GRI 50R-12, 50RF-12

• Sentrol 1055


Recessed


• 5/8" (16mm) gap for steel

• 12" (30cm) leads

MPS70WG3/4" Steel Door Contact

ORDERING:


40


REPLACES:

• ADEMCO 947-75

• GRI 180-12WG, 180-12, 180MC-12

• Nascom N-78C

• Sentrol 1078C

• Tane SD-70

SPECIFICATIONS:


41

.46

.90

.90


Recessed


• 12" (30cm) leads

MPS73WG3/4" Contact with 3/8" Magnet

ORDERING:


42


REPLACES:

• GRI 120T-12, M5

SPECIFICATIONS:


43

.44

.90

.90

.46.375


Recessed

• The clean look of recessed contactscoupled with robust features thatmeet the requirements of steel doors

• 1" (25mm) diameter with “lock-in”mounting caps

• Standard gap 1/2" (13mm) in steel

• 5' (1.5m) zip cord leads are standard

• Includes 3/8" diameter by 1" longbare magnet

9471" Steel Door Magnetic Contact

ORDERING:

947WH – White 947BR – Brown

44


SPECIFICATIONS:


45

1.571.00

1.00

.375

REPLACES:

• Sentrol 1078


Recessed

• 3/8" diameter press fit design

• Screw terminals eliminates wire splicing and soldering


• Staggered T Terminals ensure asecure electrical connection

944T3/8" Magnetic Contact with

Screw Terminals


ORDERING:

944T-WH – White944T-BR – Brown944WH-M – Extra magnet (10 Pack)944BR-M– Extra magnet (10 Pack)

46


REPLACES:

• Aleph DC-3621

• GRI 2020T, 20RS-T

• Sentrol 1125T, 1075

• Tane-3/8T, 318TC

SPECIFICATIONS:


47

1.30

.43

1.20

.43


Recessed

• 3/8" diameter press fit design

• Rare Earth button magnet


• Staggered T Terminals ensure asecure electrical connection

944TRE3/8" Magnetic Contact with

Terminals and Rare Earth Magnet

ORDERING:

944TRE-WH – White944TRE-BR – BrownPROBTM– 10 Pack of button magnets

48


REPLACES:

• GRI N2020-TWG

• Sentrol R1125T

SPECIFICATIONS:


49

.43 .40

.12

1.23


Recessed

• 3/4" diameter switch for easierwiring; supplied with 3/8" diametermagnet


• Staggered T terminals ensure asecure electrical connection

944TSP3/4" Contact with Terminals

and 3/8" Magnet


ORDERING:

944TSP-WH – White944TSP-BR – Brown944TSP-GY – Grey944WH-M – Extra magnet (10 Pack)944BR-M – Extra magnet (10 Pack)

50


REPLACES:

• GRI 120T-12, 4473, M5

SPECIFICATIONS:


51

1.38

.43

1.30

1.00


Recessed

• 3/4" recessed with 3/4" magnet and terminals

• 1/2" gap in steel


947-75TSteel Door Magnetic Contact

with Terminals


ORDERING:

947-75TWH – White947-75TBR – Brown

52


REPLACES:

• GRI 8080-T, 8080TMC, 150R5-T

• Sentrol 1078CT

• Tane 3/4 TC

SPECIFICATIONS:


53

0.75

1.00

1.06

0.50


Recessed

• Shorter body for easier recess fit

• Full 180° activation


956RPTMini Roller Plunger Contact

with Terminals


ORDERING:

956RPT-WH – White956RPT-BR – Brown956WH-B – With 18" (46cm) leads white 956BR-B – With 18" (46cm) leads brown 956-2WH – SPDT with 18" leads

54


REPLACES:

• GRI DS-01T

• Sentrol 3005, 3008

• Tane RB-32

SPECIFICATIONS:


55

.74

1.56

1.47

.951.19


Recessed

• Broad face plunger distributesimpact more evenly

• Staggered T terminals ensure a secure electrical connection

955PSTMini Plunger

Contact with Terminals


ORDERING:

955PST-WH – White955PST-BR – Brown

56


REPLACES:

• GRI PBF-100T

• Sentrol 3015

• Tane PB-52T

SPECIFICATIONS:


57

1.56

1.41

.74

1.19.95


58

Commercial

58

During lightning strikes or powersurges, voltage can flow through the reed switch of a magneticcontact—fusing the switch andrendering windows and doorsunprotected. For the surge protectionyou need, look to Honeywell’s robustXTP contacts.

Look for contacts featuring the “XTP” symbol throughout this section!

XTP

Featured Product


5959

Commercial968XTP Shown


Commercial

• Defeat-resistant from external magnetic tampering

• Includes tamper switch to notify of removal

• XTP protection (up to 2400VDC)

• Suitable for Indoor/Outdoor use

• Epoxy sealed for protection from moisture and corrosion

• 3' (91cm) stainless steel armored cable

968XTPXTP High Security Switch

ORDERING:

968XTP – High Security Balanced Switch

60

XTP


SPECIFICATIONS:


250ma @ 12VDC

61

1.5

4.25

.70

REPLACES:

• Sentrol 2507AH-L, 2707A-L

Patent # 4,945,340


Commercial

• XTP contacts withstand surges up to 2400VDC

• The toughest commercial contact ever developed

• Rugged aluminum housing

• Completely immersion proof (epoxy sealed)

• 3' (91cm) armored cable is standard

• Wide gap of 2-1/2" (64mm) is standard

960XTP Surface MountMagnetic Contact

ORDERING:

960 – SPST Switch (Form A)960-2 – SPDT Switch (Form C)

62

XTP


REPLACES:

• GRI 4400

• Nascom 505A

• Sentrol 2505A

SPECIFICATIONS:

Switch Type: Form A (SPST) Reed (960)Switch Type: Form C (SPDT) Reed (960-2)Contact Rating: 100ma @ 28VDC

63

2.00

3.50

.50

1.20


Commercial

• XTP contacts withstand surges up to 2400VDC

• 6' (1.8m) CLII cable is standard

• Completely immersion proof (epoxy sealed)

• Wide gap of 2-1/2" (64mm) is standard

7945XTP Surface Mount Magnetic

Contact with Leads

ORDERING:

7945WH – White7945BR – Brown7945GY – Grey7945-2GY– SPDT Switch (Form C)7945WH-M – Spare magnet7945BR-M – Spare magnet7945GY-M – Spare magnet

64

XTP


REPLACES:

• Amseco AMS37

• GRI 400, 410

• Sentrol 1045

SPECIFICATIONS:


65

3.95

.53

.53


Commercial

• Standard gap 2" (51mm)

• Industrial surface mount

• Includes spacers and mountingscrews

MPS80Surface Mount Contact

with Terminals

ORDERING:


66


REPLACES:

• Amseco AMS37

• GRI 400, 410

• Sentrol 1045

SPECIFICATIONS:


67

4.00

.70

.60


Commercial

• Rugged cast aluminum housing forprotecting magnet

• Armored cable standard on every model (18") (46cm)

• Standard gap: 1" (25mm) minimum

• Unobtrusive design resists damagein high traffic areas

957Overhead Door Magnetic Contact

ORDERING:

957 – Standard gap 1" (25mm) minimum957W – Wide gap 2" (51mm) minimum

68


REPLACES

• Sentrol 2205A-L, 2205AO-L

SPECIFICATIONS:


69

mm

1.70

.45

4.25


Commercial

• Adjustable magnet with L bracket

• 24" (61cm) armored cable is standard

• Standard gap: 2-3/8" (60 mm) minimum

• Epoxy sealed for protection from moisture and impact

• Rugged “Shock Absorber” design protects reed against flex or damage to housing

958Overhead Door Magnetic Contact

ORDERING:

958 – SPST Switch (Form A)958-2 – SPDT Switch (Form C)

70


REPLACES:

• Aleph PS-2023

• Amseco ODC59A

• GRI 4532/4532L

• Sentrol 2202AU-L, 2202A-L,2204AU-L

SPECIFICATIONS:


71

.45

4.25

1.70


Commercial

• Exceeds UL transient test withstandingsurges up to 2400 Volts

• The standard for OHD contactapplications

• Adjustable magnet with L bracket


959XTP Overhead Door Contact

ORDERING:

959 – Overhead Door Contact

72

XTP


SPECIFICATIONS:


73

.45

4.25

1.70


Commercial


• Form C

• 24" (61cm) armored cable

• Adjustable magnet bracket

MPS51COverhead Door Contact

ORDERING:

MPS51C – Overhead Door Contact

74


SPECIFICATIONS:


75

4.10

1.96

.40

REPLACES:

• GRI 4532/4532L

• Sentrol 2202AU, 2202A


Commercial



• Adjustable magnet

MPS52Overhead Door Contact

ORDERING:

MPS52 – Overhead Door Contact

76


REPLACES:

• Amseco ODC59A

• GRI 4532/4532L

• Sentrol 2202AU, 2202A

SPECIFICATIONS:


77

4.10

.40

1.95


78

V-Plex

Honeywell’s patented V-Plex pollingloop technology literally definesprice and performance on a simplepair of wires. By utilizing only twowires instead of four, V-Plex offerssignificant advantages overconventional four-wire installations —providing economical expansion ofperipheral devices and pointidentification to your central monitoringstation. In addition, reduced powerconsumption by V-Plex devices virtuallyeliminates the need for auxiliary powersupplies.

V-Plex offers a labor and time–savingmaintenance feature that gives you theability to diagnose and pinpoint defectswhile in maintenance mode.

Featured Product


79

V-Plex ContactsHoneywell Exclusive

Patent 6,721,283


V-Plex

• Programmable surface mount contact

• Compatible with control panels withserial number device capabilities formultiplex polling loop


• 5' (1.5m) CLII jacketed cable

• Epoxy sealed for protection frommoisture and impact

• Programmed from VISTA keypad orlearn mode

4939SNV-Plex Addressable Surface

Mount Contact

ORDERING:

4939SN-WH – White4939SN-BR – Brown4939SN-GY – Grey80


SPECIFICATIONS:


81

BP

547U

C L

.53

.50

2.10

2.50

Honeywell Exclusive:

Patent polling loop technology

Patent # 6,721,283


V-Plex

• Mini-surface style with snap on cover to conceal mounted screws


• 5' (1.5m) CL II jacket cable

• Epoxy sealed for protection from moisture and impact

• Programmed from VISTA keypad

4945SNV-Plex Addressable

Surface Mount Contact

ORDERING:

4945SN-WH – White

82


SPECIFICATIONS:


83

1.95

.43

.43



Patent # 6,721,283


V-Plex

• Popular press fit design conceals reed,Point ID module and magnet in just3/8" diameter case

• For use with VISTA controls supportingPoint ID serial number sensors

• Standard gap: 3/4" (19mm) end-to-end

• Factory installed 5' (1.5m) zip cord lead saves time

4944SNV-Plex Addressable Recessed

Mount Contact

ORDERING:

4944SN-WH – White

84


SPECIFICATIONS:


85

0.440.44

0.65

.375

0.77



Patent # 6,721,283


V-Plex

• Programmable recessed contact

• Compatible with control panels with serial number device capabilities for multiplex polling loop

• Press fit design in 1/2" (12mm) diameter case

• Factory installed 5' (1.5m) zip cordleads saves time

• Standard gap: 7/8" (22mm) end-to-end

4191SNV-Plex Recessed Magnetic Contact

ORDERING:

4191SN-WH – White4191WA – 3/4" (19mm) adapter for

steel doors86


SPECIFICATIONS:


87

.50

2.0



Patent # 6,721,283


V-Plex

• Rugged aluminum housing andadjustable L bracket type magnet



• Epoxy sealed for protection frommoisture and impact

• Programmed from VISTA keypad

4959SNV-Plex Addressable

Overhead Door Contact

ORDERING:

4959SN – V-Plex AddressableOverhead Door Contact

88


SPECIFICATIONS:


89

.45

4.25

1.70



Patent # 6,721,283


90

Tamper Loop

By adding a special tamper loop to the existing alarm circuit, thisfour-wired configuration makes itdifficult for potential intruders totamper with the system–providingan added level of security.

This next section highlights ourTamper Loop magnetic contacts.

Featured Product

Tamper Loop Contact

To Alarm Circuit

To Tamper Loop


91

Tamper Loop Contacts944CE Shown


Tamper Loop

• 3m (10ft.) jacketed leads

• Standard gap 25mm (1.0")

• Tamper Loop for added security

• Packaged 5 per bag

944CE-WH8mm Diameter Recessed

Contact with Tamper Loop

ORDERING:

944CE-WH – White (5 pack)

92


1.30

.41

1.20

.315

.41

SPECIFICATIONS:


93


Tamper Loop

• 3m (10ft.) jacketed leads

• Standard gap 28mm (1-1/8")


• Packaged 5 per bag

PAL-CE-WHSurface Mount Contact

with Tamper Loop

ORDERING:

PAL-CE-WH – White (5 pack)

94


2.10

.47

.43

SPECIFICATIONS:


95


Tamper Loop

• 30cm (12") lead length

• Standard gap: 12mm (1/2")


• Package 1 per bag

EMPS-108mm Diameter Recessed Contact

with Tamper Loop

ORDERING:

EMPS-10W – White EMPS-10B – Brown

96


1.00

.37

.315

SPECIFICATIONS:


97


Tamper Loop

• 62cm (24") armored cable

• Standard gap: 5.5cm (2")

• Complies with EN50131-1 (Grade 2, Class II)

• Rugged aluminum housing


• Package 1 per bag

EMPS-50Overhead Door Contact with

Tamper Loop

ORDERING:

EMPS-50 – Overhead Door Contact

98

EN50131-1


4.10

1.95

.40

SPECIFICATIONS:


99


Tamper Loop

• 30cm (12") lead length



EMPS-7020mm Diameter Recess Contact

with Tamper Loop

ORDERING:

EMPS-70W – WhiteEMPS-70B – Brown

100


.76

.62

1.00

SPECIFICATIONS:


101


Tamper Loop




EMPS-7520mm Diameter Recessed Contact

with Terminals

ORDERING:


102

EN50131-1


1.571.18 .64

.50

SPECIFICATIONS:


103


Tamper Loop




EMPS-85Surface Mount Contact

with Terminals

ORDERING:


104

EN50131-1


2.50

2.00

.27

.27

SPECIFICATIONS:


105


106

GLOSSARY

Break Gap (Break Distance)- The minimum distance betweenseparated mating contacts in theirfully open position.

DPDT (Double-Pole DoubleThrow) - Switches, which makeand break two separate circuits.This circuit provides a normallyopen and normally closed contactfor each pole.

EOLR - An End-of-Line Resistorsupervises the wiring between thealarm panel and the switch. Whenproperly placed in the circuit, EOLresistors prevent wire tampering onnormal switches.

Normally Open (NO) - Switchthat must be actuated to pass current.

Normally Closed (NC) - Switchthat passes current until actuated.

Pole - The number of completely


107

separate circuits that can passthrough a switch at one time. Asingle pole switch can control onlyone circuit at a time. A double poleswitch can control two independentcircuits at the same time. Thenumber of poles is completelyindependent of the number ofthrows and number of breaks.

SPDT (Single-Pole Double-Throw)(Form C) - Switch which may eithermake or break a circuit, dependingon how it is wired.

SPST (Single-Pole Single-Throw)(Form A) - Switch with only onemoving and one stationary contact.Available either normally open (NO)or normally closed (NC).

Standard Gap (Make Distance)- Refers to the minimum distancerequired before the contact circuitrestores to its normal state (i.e. NO or NC).


1 mm = 0.04 in1 cm = 0.39 in1 in = 2.54 cm 1 in = 25.4 mm

108

Conversion Chart

To Convert From To Multiply By

Inches (in) Millimeters (mm) 25.4

Inches (in) Centimeters (cm) 2.54

Millimeters (mm) Inches (in) 0.03937

Centimeters (cm) Inches (in) 0.3937

Feet (ft) Meter (m) 0.3048

Meter (m) Feet (ft) 3.2808


Date post:	07-Mar-2018
Category:	Documents
Upload:	trinhthuan
View:	273 times
Download:	4 times

Magnetic Contact Guide - Honeywell & CUSTOM ELECTRONICS Magnetic Contact Guide Honeywell Security &...

Documents