www.petroEDGEasia.net ADVANCED GEOMODELLING 20 – 22 September| Kuala Lumpur, Malaysia Your Expert Course Faculty RAFFIK LAZAR Raffik Lazar has a Master Degree in Geology majoring in carbonate sedimentology and geomodelling from Université de Provence, Marseille, France. He joined Shell in 2006 as development geologist and worked in several locations around the world (Netherlands, Oman, Iran, and Malaysia). In every location he worked, his passion, skills and enthusiasm for geomodelling made him the “go-to” person for all geomodelling related matters.
Transcript
www.petroEDGEasia.net
ADVANCED GEOMODELLING
20 – 22 September| Kuala Lumpur, Malaysia
Your Expert Course Faculty
RAFFIK LAZAR
Raffik Lazar has a Master Degree in Geology majoring in carbonate sedimentology and geomodelling from Université de Provence, Marseille, France. He joined Shell in 2006 as development geologist and worked in several locations around the world (Netherlands, Oman, Iran, and Malaysia). In every location he worked, his passion, skills and enthusiasm for geomodelling made him the “go-to” person for all geomodelling related matters.
Conduct this training course in-house for more effective savings!
Call us at +65 6741 9927 or email to [email protected]. For more information, visit us at www.petroedgeasia.net
ADVANCED GEOMODELLING 20 – 22 September 2016 | Kuala Lumpur, Malaysia
Course Overview Geomodelling is the corner stone between geological concepts underlying reservoir development and numerical solutions attempting to represent the same reservoir. With the progress made in computing capabilities, highly demanding tasks such as 3D reservoir visualization, property prediction and dynamic simulation became routine and occupy most of the daily duty of the reservoir geologist/engineer. The Advance Geomodel Building course explores the more advanced Geomodelling techniques by going through an advanced Geomodelling workflow for supporting a dynamic simulation. Under its current format, the Advance Geomodel Building course is tailored for a Petrel Geomodelling platform.
Why should you attend This course describes all the steps for the advance geomodelling workflow used to support dynamic reservoir simulation of a field. Attendees of the Advance Geomodel Building course, will have the chance to go through a full Geomodelling cycle and replicate the main elements of the process step by step with a strong emphasize on best practices and most common pitfalls.
Who should attend Development Geoscientists or Geomodellers who wish to bring their Geomodelling skills to the next level. Experienced staffs who wish to acquire or consolidate their geomodelling skills are encouraged to participate What will you learn? Specific topics that will be discussed include the following:
- Type of data and other subsurface disciplines integration needed to develop the understanding of the field - Input data import and conditioning - Guidelines to build an effective structural model - The use of Property modelling to populate the geomodel away from Well control - Volumetrics calculation - Exporting the geomodel to the dynamic simulation platform and getting feedbacks
- Reservoir property prediction away from control points
- Using secondary variables to constrain reservoir properties
DAY 3 Module 7: Volumetrics calculation
- Generate a Base Case Volumetrics scenario - Introduction to Sensitivity and Uncertainty in
Volumetrics - Best practices
Module 8: Export to dynamic simulation - Before exporting to the dynamic simulator - Feedbacks from dynamic simulation - Best practise
Module 9: Closing notes
About Your Expert Trainer Raffik Lazar has a Master Degree in Geology majoring in carbonate sedimentology and geomodelling from Université de Provence, Marseille, France. Aside of a short term assignment with Geopetrol, the smallest French O&G operator in France, building their first geomodel ever, Raffik spent his remaining time
with Shell International Exploration and Production and held several positions:
- Carbonate Geoscientist in the Carbonate Research Team, in Rijswijk, The Netherlands
- Field Engineer, seconded by Shell to Schlumberger to gain drilling operation exposure in Oman and Offshore Iran
- Development Geologist in the Onshore Asset Team in the NAM (JV 50% Shell, 50% Exxon) in Assen, The Netherlands
- Senior Development Geologist in the Sarawak Asset Team in Shell Malaysia Exploration & Production, Miri, Malaysia
Across his career, Raffik has developed a strong passion for Geomodelling, focusing on how to add value during the development phase of a field by using the geomodelling tool. In every position he has held, Raffik has always been the “go-to” person for geomodelling related inquiries for his colleagues. Recently, his apparition at the EAGE and the APGCE conferences increased the recognition from his industry peers. Logically, he has been designated as member of the technical committee for the third EAGE Integrated Reservoir Modelling conference, in Kuala Lumpur, in December 2016. Raffik has modelled several tens of fields ranging from Carbonates to Clastics depositional environments, from pre-exploration to very mature fields and from single-well development to giant fields for both Oil and Gas reservoirs. Raffik has been directly involved in drilling operations as wellsite and office based geologist for several wells drilling through various type of reservoirs in Europe, the Middle East and South East Asia. His activities were involving well planning (well deployment, well design strategy, depth prognosis, PPP), drilling monitoring (picking section / well TD, active geosteering in the reservoir) and post drilling activities (post drilling report, post drilling model update, pre drill / post drill comparison, communication with stakeholders). Raffik has a proven track record as successful Coach / Mentor via his supervision and guidance of several young graduates and interns. His interpersonal skills and passion for sharing with younger staffs have been recognized by his peers in all the locations he worked. Throughout the years and thanks to his determination and fighting spirit, Raffik has been known as the person who makes the impossible possible. It is with this mindset that he co-founded GeomodL. He joined Shell as development geologist and worked in several locations around the world (Netherlands, Oman, Iran, Malaysia). In every location he worked, his passion, skills and enthusiasm for geomodelling made him the “go-to” person for all geomodelling related matters. He is currently the Founder, Managing Director for GeomodL, focused on Reservoir Modelling.
Conduct this training course in-house for more effective savings!
Call us at +65 6741 9927 or email to [email protected]. For more information, visit us at www.petroedgeasia.net
ADVANCED GEOMODELLING 20 – 22 September 2016 | Kuala Lumpur, Malaysia
EARLY BIRD RATE
STANDARD RATE petroEDGE recognises the value of learning in
teams. Group bookings at the same time from the same company receive the following: 3 or more at 5% off 5 or more at 7% off 8 of more at 10% All other promotions including early bird are exclusive of the group discount.
Kuala Lumpur, Malaysia 20 – 22 September 2016
SGD 2,899 SGD 3,099
In-House Training Yes, I would like to organise this training on-site and save on total course fees! For further information about On-site Solutions, please +65 67419927 or email [email protected]
DELEGATE DETAILS
DELEGATE 1
PAYMENT METHODS By Cheque/ Bank Draft Make Payable to Asia Edge Pte. Ltd. By Direct Transfer Please quote your invoice number with the remittance advise Account Name: Asia Edge Pte. Ltd. Bank Code: 508 Account Number: 762903-001 Swift Code: OCBCSGSG All bank charges to be borne by payer. Please ensure that Asia Edge Pte Ltd receives the full invoiced amount. PAYMENT POLICY Payment is due in full at the time of registration. Full payment is mandatory for event attendance. By submitting this registration form, you have agreed to Asia Edge Pte Ltd’s payment terms CANCELLATIONS & SUBSTITUTIONS You may substitute delegates at any time. For cancellations received in writing more than seven (7) days prior to the training course, delegates will receive a 100% credit on the amount paid which can be used in another Asia Edge Pte. Ltd. training course for up to one year from the date of issuance. The credit is transferable to other persons in the same company and applicable against any future Asia Edge Pte. Ltd. public course. For cancellations received seven (7) days or less prior to an event (including day 7), no credit will be issued. In addition, a cancellation fee equivalent to 15% of the course fee will be charged. In the event that Asia Edge Pte. Ltd. postpones or cancels a course, delegate payments at the date of cancellation or postponement will be credited to a future Asia Edge Pte. Ltd. course. This credit will be available for up to one year from the date of issuance, and it is transferable to other persons in the same company and applicable against any future Asia Edge Pte. Ltd. public course. Asia Edge Pte. Ltd. does not provide refunds for cancellations and postponements or waive fees for unpaid invoices upon receipt of registration. PROGRAM CHANGE POLICY Please note that speakers and topics were confirmed at the time of publishing; however, circumstances beyond the control of the organizers may necessitate substitutions, alterations or cancellations of the speakers and/or topics. As such, ASIA EDGE PTE LTD reserves the right to alter or modify the advertised speakers and/or topics if necessary. Any substitutions or alterations will be updated on our web page as soon as possible. ASIA EDGE PTE. LTD. Company Registration No: No. 200710561C Copyright@ 2015 ASIA EDGE PTE LTD. All rights reserved. This brochure may not be copied, photocopied, reproduced, translated, or converted to any electronic or machine-readable form in whole or in part without prior written approval of ASIA EDGE PTE LTD
Please note - Indicate if you have already registered by Phone +Fax +Email +Web - If you have not received an acknowledgement before the training course, please call us to confirm
