Date post: | 10-Feb-2018 |
Category: |
Documents |
Upload: | japneet-singh |
View: | 220 times |
Download: | 1 times |
7/22/2019 PEB Profile (1)
http://slidepdf.com/reader/full/peb-profile-1 1/11
----------------------------------------------------------------------------------------------------------------------------
About Us
We at Udhav Industries Limited are engaged in creating contemporary building solutions for
industrial, commercial and domestic sectors. Our product range includes pre-fabricated huts and
shelters, pre-engineered steel buildings, cold roll formed metal sections, and roofing and wall
cladding solutions among others. We strive to provide complete structural solutions under one roof.
We have in-house facility for cold rolled forming for making ‘Z’, ‘C’, ‘U’, ‘W’, ‘L’, ‘T’ and
pressed steel door and window sections and for profiling of sheets for roofing, wall-cladding,
flashing, girts, ridge etc. We have a full fledged work shop for manufacturing columns, pillars, rafters,trusses and various other parts for pre-engineered buildings, portal truss systems and pre-fabricated
huts.
Our promoters MTI have been engaged in manufacture and supplies to the prestigious
defence and paramilitary forces of the country for the last two decades. Some of our most valued
customers include esteemed government bodies like Border Security Force, Central Industrial Security
Force, Assam Rifles and Eastern Command. They have been supplying complete structural solutions
to these bodies for many years now.
Select Clientele
Continental Engines, Gurgaon
Gayatri Automation, Alwar
Shiv Shakti Minerals, Alwar
Shape Engineering Co., Haridwar
Jai Ganesh Engineering, Haridwar
Anchor Panasonic, Roorkee
Victora Auto Pvt. Ltd., Haridwar
Oberoi Motors, Roorkee/Haridwar/Dehradun
Jay Ace Technologies, Roorkee
Recliners India Ltd., Roorkee
Naulakha Surfactants, Roorkee
Era Infra’s Haridwar - Dehradun Highway Project
Dabur Research & Training Centre, Rudrapur
TTK Prestige Co., Roorkee
PG International, Roorkee
Osho Packaging, Roorkee
Himadri Chemicals, Kolkatta
SKN Bentex, Roorkee
Apple Formulations, Roorkee
Bentex Control & Switch Gear, Roorkee
Spectro Research Lab Ventures, Kanpur
Nanda and Nanda Associates, Haridwar
7/22/2019 PEB Profile (1)
http://slidepdf.com/reader/full/peb-profile-1 2/11
----------------------------------------------------------------------------------------------------------------------------
Pre-engineered Buildings at UIL
Pre-engineered buildings have become the
choice of construction in the industrial sector. They
take one-third time in setting up as compared to
conventional construction and offer far more
flexibility in design and construction.
At UIL, our team of experts is engaged in
design, fabrication & erection of world class pre-
engineered buildings. Highest quality standards are
ensured in procurement of steel and utmost care is
taken in ensuring structural strength and soundness.
The U I L Advantage
Efficient use of steel to ensure minimum
practical structural weight
Complete PEB Solution including all sub-
structures and accessories
Adherence to International Standards
and SpecificationsOutstanding structural design
U I L
Pre-Engineered
Buildings
7/22/2019 PEB Profile (1)
http://slidepdf.com/reader/full/peb-profile-1 3/11
----------------------------------------------------------------------------------------------------------------------------
Select Projects
Shape Engineering, Haridwar Jai Ganesh Engineering, Haridwar
Gayatri Automation, Alwar Dabur Research & Training
Centre, Rudrapur
Victora Auto, Haridwar Oberoi Motors, Dehradun
7/22/2019 PEB Profile (1)
http://slidepdf.com/reader/full/peb-profile-1 4/11
----------------------------------------------------------------------------------------------------------------------------
Pre-engineered Buildings at UIL
7/22/2019 PEB Profile (1)
http://slidepdf.com/reader/full/peb-profile-1 5/11
----------------------------------------------------------------------------------------------------------------------------
Primary Members
Primary members consisting of columns and rafters are the main load
carrying members of the structural system. They are also called Built-Up
Members and are usually an "I" shape, made from individual flat plates
welded together.
High strength HR Plates are used in their fabrication. Built up sections are
made from these plates in automatic beam welding line by submerged
Arc welding (SAW).
Specification Conformance: ASTM A572M
Secondary Members
Secondary structural members are used to support the wall and roof panels and consist of purlins, girts, eave
struts, flange brace etc. They share part of the longitudinal loads that are applied on the building such as wind
and earthquake loads. They also provide lateral bracing to the compression flanges of the main frame members
thereby increasing frame capacity.
Purlins and girts are cold rolled formed light gage Z sections varying in depth from 180 to 300 mm and in thickness
from 1.5 mm to 2.5 mm as per design requirements. All primary connection fasteners will be with high strength
bolts conforming to the physical specification to ASTM A570M and IS: 2062
7/22/2019 PEB Profile (1)
http://slidepdf.com/reader/full/peb-profile-1 6/11
----------------------------------------------------------------------------------------------------------------------------
Design Choices
Clear Span: Maximum practical width = 80 m Multiple Gable: Maximum practical module width = 80 m
Single Slope: Maximum practical width = 50 m Multi-Span: Maximum practical module width = 70 m
Multi Level Steel Buildings
For multi-level buildings, an intermediate mezzanine floor is included in our design. It
consists of columns, beams, joists, deck panels and edge trims to receive reinforced
concrete.
Steel Staircase
Mezzanine Floor
7/22/2019 PEB Profile (1)
http://slidepdf.com/reader/full/peb-profile-1 7/11
----------------------------------------------------------------------------------------------------------------------------
Decking Sheet for Mezzanine Floor
Mezzanine deck panel is intended to carry only the dead load of
the wet concrete; it acts as a permanent shuttering.
Fascia
Vertical Fascia Centre Curved Fascia
Bottom Curved Fascia Top and Bottom Fascia
7/22/2019 PEB Profile (1)
http://slidepdf.com/reader/full/peb-profile-1 8/11
----------------------------------------------------------------------------------------------------------------------------
Crane Beam and Brackets
Crane beam to support an overhead or under hung bridge crane is part of many
of our steel buildings. Brackets for structural support are welded to the primary
building frame to permit attachment of the crane beam. Crane rails, beam hoist
and bridge are excluded from our supply.
Choice of Crane Systems
Top Running Crane Under-hung Crane
Monorail Crane
7/22/2019 PEB Profile (1)
http://slidepdf.com/reader/full/peb-profile-1 9/11
----------------------------------------------------------------------------------------------------------------------------
Roofing and Wall Cladding
For roofing and wall cladding, superior quality metal sheets are used. Our sheets are 26G TCT Hi Rib of 550 MPA Steel .
Our sheeting solutions ensure high strength, better over lap, weather tightness, corrosion resistance, low maintenance
cost and good aesthetics. Options available:
o Bare Galvalume Sheets
o Pre-painted Galvalume (PPGL) Sheets
o Pre-painted Galvanized (PPGI) Sheets
o PUF Insulated Panels
Galvalume steel is a zinc aluminum coated steel offering high corrosion resistance. This alloy coating com comprises
of 55% aluminum 43% zinc and 1.5% silicon. This Coating offers a superior barrio protection against varied
atmospheric conditions. The coating class is AZ-150 as per AS : 1397, which means 150gms/m2 minimum coating
mass total of both sides. Galvalume sheets are available in tensile strengths of 300, 345 & 550 MPa
Galvanized steel comprises of galvanized zinc coating over mild steel of minimum coating mass 120 gms / m2
as per IS 277 and IS 14246 in tensile strength of min. 240 MPa.
PUF Insulated Panels
The outer and inner metal skins of Insulated Panels conform to the same
specifications as above. In addition, Insulated Panels have factory injected
polyurethane foam (PUF) for thermal insulation.
Building Sub-Structures and Accessories
Canopy
Canopies and roof extensions are part of many PEB designs. They
enhance utility as well as aesthetic value of the building. They are
made using hot rolled or built-up members. They are beyond the
steel lines of the building and located below the eave.
7/22/2019 PEB Profile (1)
http://slidepdf.com/reader/full/peb-profile-1 10/11
----------------------------------------------------------------------------------------------------------------------------
Gutters & Down Spout Pipe
One of the most essential accessories in any PEB design gutters and down spout pipes ensure movement of water over
the building surface. They are produced from the same material as wall and roof sheeting.
Standard Wall Trimmings
Wall Trimmings including corner trim, eave trim, gable trim etc. are produced from the same material as wall and roof
sheeting:
Ridge Vent
We offer the option of ventilation at the ridge line through the use of a
Ridge vent.
7/22/2019 PEB Profile (1)
http://slidepdf.com/reader/full/peb-profile-1 11/11
----------------------------------------------------------------------------------------------------------------------------
Contact Us
Head Office: 58/74-76, Birhana Road, Kanpur.
Works: Khasra No. 138, Raipur, Bhagwanpur, Roorkee.
Contact no.: +91 98390 35937
Email: [email protected]
For more information on us, please visit our website www.udhavind.com
Select Products
Pre-fabricated Huts and Shelters Pre-engineered Steel Buildings
False Ceiling Solutions Roofing and Wall Cladding Solutions