• Pedestals
• Housings
• Hoods
Industrial, Architectural, and Full Customization for
Security & Access ControlProfessionals
®
250,000+ InstallationsWorldwide
Pedestal PRO is a Registered Trademark of Pedestal CEO © 2017 Pedestal CEO, LLC - All Rights Reserved
36”
PEDESTALS
Steel, Pad Mount, Black, 4” Face Plate
36-9
C
Steel, Pad Mount, Black, 6” Face Plate
36-A
PD-B
LK
Steel, Pad Mount, White, 6” Face Plate
36-A
PD-W
HI
Steel, Pad Mount, Yellow, 6” Face Plate
36-A
PD-Y
EL
Add 6” of curb underneath for car height 42”
Steel, Pad Mount, Black, Low Profile
42-2
LP
Steel, Pad Mount, Black, 12” Gooseneck
Steel, Pad Mount, White, 12” Gooseneck
42-9
C-W
HI
Steel, Pad Mount, Yellow, 12” Gooseneck
42-9
C-YE
L
Typical car and pedestrian height
42-9
C-BL
K
Aluminum, “Anodized” Powder Coated
42-9
C-AL
UM-A
NO
Aluminum, “Black” Powder Coated
42-9
C-AL
UM-B
LK
Stainless Steel, Brushed #4 Finish
42-9
C-SS
Steel, Pad Mount, Black, Side-by-Side Necks
42-T
T
Steel, Pad Mount, Black, 3” Tube
42-3
-12
44”- 53”
Steel, 44”, Pad Mount, Black, 3” Tube, 8” Face Plate
MDS
-100
Typical car and pedestrian height for telephone entry systems
Steel, 48”, Pad Mount, Black, 12” Gooseneck
48-9
C
Steel, 48”, Pad Mount, Black, 4” Tube, Bollard
HD-B
LACK
-TOW
ER
Steel, 48”, Pad Mount, Black, 4” Tube, 8” Face Plate
HD-1
00
Steel, 53”, Pad Mount, Black, Fits DoorKing® Telephone Entry
HD-D
K
Steel, 53”, Pad Mount, Black, Fits Chamberlain® Telephone Entry
HD-D
C
Steel, 53”, Pad Mount, Black, Fits DoorKing® Telephone Entry
HD-D
K-ST
RAIG
HT
Included: Heavy Gauge Steel, Cover Plates (where applicable), Outdoor TGIC Polyester Powder Coat (where applicable), Boxed Individually, Carriage Bolt Hardware (where applicable)
®
ACCESSORIES
12-E
XT-2
12” Extension Arm
CS-A
BP-1
212
12x12x1 HDPE Buffer Plate RFID
CS-A
BP-0
505
5x5x1 HDPE Buffer Plate RFID
MaxActuator Entry & Exit ButtonL-Bolt Kit Anchor Bolt Kit
CS-H
ID-R
P40
5x5x.25 Retro Plate
L-BO
LT-K
IT
STUD
-AN
CHOR
- KIT
All pedestals, housings, and hoods can be made using mild steel, stainless steel, and aluminum. Typical stainless steel material is #304 stainless; however, #316 (marine grade) is available upon special request.
Additional costs and lead times may apply.
Standard Colors (Readily Available)
White
Safety Yellow
Black
Any Custom “RAL” Colors Available (Leadtime)
Steel, Pad Mount, Black, Photo Eye Bollard
36-L
P-BK
CS-A
BP-1
313
13x13x1 HDPE Buffer Plate RFID
Pedestal PRO is a Registered Trademark of Pedestal CEO © 2017 Pedestal CEO, LLC - All Rights Reserved
Steel, Pad Mount, Black, 4” Face Plates, Dual Height Single Post
58-9
C-DS
P
Steel, Pad Mount, Black, 4” Face Plate, Single Height
58-9
C-S
58” Small SUV height
Steel, Pad Mount, Black, 4” Face Plates, Dual Height Dual Post
58-9
C-D
42”
58”
®
72” Semi truck and bus height
64-9
C-DS
P
64-9
C-S
64” SUV and delivery truck height
72-9
C-DS
P
72-9
C-S
64-9
C-D
Steel, Pad Mount, Black, 4.75” Face Plate, 3” Tube, Single Height
72-3
-12
72-9
C-D
Steel, Pad Mount, Black, 4.75” Face Plates, 3” Tube, Dual Height Single Post
72-D
SP-3
-12-
12
Steel, Pad Mount, Black, 4” Face Plates, Dual Height Single Post
Steel, Pad Mount, Black, 4” Face Plate, Single Height
Steel, Pad Mount, Black, 4” Face Plates, Dual Height Dual Post
Steel, Pad Mount, Black, 4” Face Plates, Dual Height Single Post
Steel, Pad Mount, Black, 4” Face Plate, Single Height
Steel, Pad Mount, Black, 4” Face Plates, Dual Height Dual Post
42” 42”
64”72”
84”
Steel, Pad Mount, Black, 8” Face Plates, 4” Tube, Dual Height
84-D
SP-4
-12-
12
Steel, Pad Mount, Black, 8” Face Plate, 4” Tube, Single Height
84--4
-12
Semi truck and bus height
42”
84”
In Ground Place 20”-24” in the ground or wet cement. All have 1/2” NPT conduit access on backside 23.5” up from their lowest point
72-9
C-IN
64-9
C-IN
Steel, 78”, Black, 4” Tube, Fits DoorKing® Telephone Entry
HD-D
K-IN
HD-1
00-IN
Steel, 78”, Black, 4” Tube, Fits Chamberlain® Telephone Entry
HD-D
C-IN
Steel, 72”, Black, 2” Tube, 4” Face Plate
Steel, 64”, Black, 2” Tube, 4” Face Plate
Steel, 72”, Black, 4” Tube, 8” Face Plate
All pedestals, housings, and hoods can be made using mild steel, stainless steel, and aluminum. Typical stainless steel material is #304 stainless; however, #316 (marine grade) is available upon special request.
Additional costs and lead times may apply.
Standard Colors (Readily Available)
White
Safety Yellow
Black
Any Custom “RAL” Colors Available (Leadtime)
PEDESTALS Included: Heavy Gauge Steel, Cover Plates (where applicable), Outdoor TGIC Polyester Powder Coat (where applicable), Boxed Individually, Carriage Bolt Hardware (where applicable)
Steel, 60”, Black, 3” Tube, Photo EyeBollard
60-L
P-IN
-BLK
Steel, Pad Mount, Black, 4.75” Face Plates, 3” Tube, Dual Height Single Post
72-D
SP-3
-04-
04Pedestal PRO is a Registered Trademark of Pedestal CEO
© 2017 Pedestal CEO, LLC - All Rights Reserved
®
HOUSINGS
MC-
CS-1
6-E
MC-
CS-2
4-E
MC-
CS-1
4-E
MC-
CS-1
2-E
MC-
CS-1
0-E
MC-
CS-0
8-E
MC-
CS-0
6-E
Portr
a-CS
-8x1
0-E
Portr
a-CS
-8x1
2-E
Portr
a-CS
-8x1
4-E
MC-
SS-1
6-E
MC-
SS-0
8-E
MC-
KY-0
8-E24 x 24 Steel
Features• 3.25” Deep Back Box• 3.25” Deep Hood• Stainless Steel Hinges• Outdoor TGIC Polyester Powder Coat
(where applicable)• EPDM Rubber Seals• Rated NEMA 4x• Custom Sizes & Cutouts Available
16 x 16 Stainless Steel
16 x 16 Steel14 x 14 Steel
8 x 8 Steel10 x 10 Steel
12 x 12 Steel
6 x 6 Steel
8 x 8 Stainless Steel
8 x 8 Polymer RFID
8 x 14 Steel8 x 12 Steel
8 x 10 Steel
SQUARE
Land
o-CS
-20x
14-E
Land
o-CS
-10x
8-E
Land
o-CS
-12x
8-E
Land
o-CS
-14x
8-E
Land
o-CS
-16x
8-E
Land
o-SS
-20x
14-E
Land
o-KY
-20x
14-E
Land
o-SS
-10x
8-E
Land
o-SS
-14x
8-E
Land
o-KY
-14x
8-E
14 x 8 Stainless Steel
14 x 8 Polymer RFID
10 x 8 Stainless Steel
10 x 8 Steel 12 x 8 Steel 14 x 8 Steel 16 x 8 Steel
20 x 14 Stainless Steel
20 x 14 Polymer RFID
20 x 14 Steel
LANDSCAPE
PORTRAIT
custom cutouts on door panel
All pedestals, housings, and hoods can be made using mild steel, stainless steel, and aluminum. Typical stainless steel material is #304 stainless; however, #316 (marine grade) is available upon special request.
Additional costs and lead times may apply.
Land
o-PC
-20x
16-E
-BLK
20 x 16 Polycarbonate RFID
Pedestal PRO is a Registered Trademark of Pedestal CEO © 2017 Pedestal CEO, LLC - All Rights Reserved
®
HOODS
HOOD
-CS-
14x1
4
HOOD
-CS-
12x1
2
HOOD
-CS-
10x1
0
HOOD
-CS-
8x8
HOOD
-CS-
6x6
14 x 14 Steel 8 x 8 Steel10 x 10 Steel12 x 12 Steel 6 x 6 Steel
HOOD
-KY-
6x6
6 x 6 Polymer RFID
HOOD
-KY-
12x1
2
12 x 12 Polymer RFID
HOOD
-CS-
4.5x
6
4.5 x 6 Steel
HOOD
-CS-
4.5x
8
4.5 x 8 SteelHO
OD-C
S-8x
10
8 x 10 Steel
HOOD
-CS-
6x8
6 x 8 Steel
PORTRAIT
Features• 3.25” Deep Hood• Available in Custom Sizes &
Materials (Stainless Steel or Aluminum) Upon Request
SQUARE
ACCESSORIES
All pedestals, housings, and hoods can be made using mild steel, stainless steel, and aluminum. Typical stainless steel material is #304 stainless; however, #316 (marine grade) is available upon special request.
Additional costs and lead times may apply.
Standard Colors (Readily Available)
White
Safety Yellow
Black
Any Custom “RAL” Colors Available (Leadtime)
custom sizes and mounting options
12-E
XT-2
12” Extension Arm
CS-A
BP-1
212
12x12x1 HDPE Buffer Plate RFID
CS-A
BP-0
505
5x5x1 HDPE Buffer Plate RFID
MaxActuator Entry & Exit ButtonL-Bolt Kit Anchor Bolt Kit
CS-H
ID-R
P40
5x5x.25 Retro Plate
L-BO
LT-K
IT
STUD
-AN
CHOR
- KIT
CS-A
BP-1
313
13x13x1 HDPE Buffer Plate RFID
Pedestal PRO is a Registered Trademark of Pedestal CEO © 2017 Pedestal CEO, LLC - All Rights Reserved
®
Flat Top, 48”, #304, Brushed #4 Finish, 180 Grit, 5” Tube
ADA-
Stai
nles
s-Bo
llard
-48x
5RxF
Tapered Top 15 deg, 48”, #304, Brushed #4 Finish, 180 Grit, 5” Tube
ADA-
Stai
nles
s-Bo
llard
-48x
5RxS
Tapered Top with Alcove, 48”, #304, Brushed #4 Finish, 180 Grit, 5” Tube
ADA-
Stai
nles
s-Bo
llard
-48x
5RxP
Removable Flat Face Plate
Round 48”+
Flat Top with Flat Face, 48”, #304, Brushed #4 Finish, 180 Grit, 5” Tube
ADA-
Stai
nles
s-Bo
llard
-48x
5RxA
Removable Flat Face Plate
Flat Top, 48”, #304, Brushed #4 Finish, 180 Grit, 7x4” Tube
ADA-
Stai
nles
s-Bo
llard
-48x
74Ex
F
Tapered Top 15 deg, 48”, #304, Brushed #4 Finish, 180 Grit, 7x4” Tube
ADA-
Stai
nles
s-Bo
llard
-48x
74Ex
STapered Top with Alcove, 48”, #304, Brushed #4 Finish, 180 Grit, 7x4” Tube
ADA-
Stai
nles
s-Bo
llard
-48x
74Ex
P
Removable Flat Face Plate
Elliptical
Flat Top with Flat Face, 48”, #304, Brushed #4 Finish, 180 Grit, 7x4” Tube
ADA-
Stai
nles
s-Bo
llard
-48x
74Ex
A
Removable Flat Face Plate
Tapered Top with Alcove, 48”, #304, Brushed #4 Finish, 180 Grit, 4x7” Tube
ADA-
Stai
nles
s-Bo
llard
-48x
47Ex
P
Removable Flat Face Plate
#304, Brushed #4 Finish, 180 Grit, 4x4 Square Tube
ADA-
Stai
nles
s-To
wer
-48x
4x4
#304, Brushed #4 Finish, 180 Grit, 4x6 Rectangle Tube
ADA-
Stai
nles
s-To
wer
-48x
6x4
60”
Square 48”+
ADA-
Stai
nles
s-To
wer
-60x
6x4
ADA-
Stai
nles
s-To
wer
-72x
6x4
72”
Large Hidden
48”
Access PanelMount from the Inside
Tapered Top
ARCHITECTURAL
Mirror Polished Corners
Shown with Max Actuator
48”
Tapered Top 15 deg, 48”, #304, Brushed #4 Finish, 180 Grit, 4x7” Tube
ADA-
Stai
nles
s-Bo
llard
-48x
47Ex
S
Flat Top, 48”, #304, Brushed #4 Finish, 180 Grit, 4x7” Tube
ADA-
Stai
nles
s-Bo
llard
-48x
47Ex
F“74E” = 7”W x 4”D with bottom access panel on back
back
front
“47E” = 4”W x 7”D with bottom access panel on back
back
front
Premium clients deserve world class aesthetics - even when it’s just a pedestal. Professionals who offer achitectural solutions are able to service these highly coveted customers.
Pedestal PRO offers a full line of readily available solutions.
Custom designs also available - call 1-800-660-3072 for details.
Stock Colors
White
Safety Yellow
#4 Brushed
Custom “RAL” colors*additional lead time
Readily Available Colors
Custom heights, widths, and cutouts available to meet your needs (lead time required)
Black
Anodized Aluminum
Bright Argent Metallic
Oil-Rubbed Bronze
48”+ * Available late Q4 2017 - currently by special order onlyAll pedestals, housings, and hoods can be made using mild steel, stainless steel, and aluminum. Typical stainless steel material is #304 stainless; however, #316 (marine grade) is available upon special request.
Additional costs and lead times may apply.
Pedestal PRO is a Registered Trademark of Pedestal CEO © 2017 Pedestal CEO, LLC - All Rights Reserved
®
custom solutions1) describe your application and the devices you plan to use—get a ballpark number while you’re on the phone (or by email)2) receive an immediate email with a quote & description—no strings attached and no commitment required3) receive an email within 24-48 hours containing a PDF (3D Model design with detail) — you can have unlimited revisions4) get a final approval and place your order—we most often need 8-10 business days to build your order (shipping days not included)5) receive a follow up call from us after receiving your order to ensure your satisfaction
Need a custom pedestal solution?We’ve got you covered. Get a fast quote by phone or
email today! Most jobs ready in 10 business days
Call us today at 1-800-660-3072to get your project started.
Pedestal PRO is a Registered Trademark of Pedestal CEO © 2017 Pedestal CEO, LLC - All Rights Reserved
• Pedestals• Housings• Hoods
Pedestal PRO947 W 500 N, Ste 101Lindon UT 84042
Mount ANy device
fits Axis A8004-VE fits Control4® Door Stationfits MaxiProx® 5375 and Aiphone® IS-IPDV
How do you mount your security electronics in NON-WALL applications? Pedestal PRO has the answers.
MaxiProx and ProxPro are registered trademarks of HID Global, Inc. ®Aiphone is a registered trademark of Aiphone, Inc. ®Control4 is a registred trademark of Control4 Corporation ®Axis A8004-VE is a product of Axis Communications, Inc. ®
Pedestal PRO is a Registered Trademark of Pedestal CEO © 2017 Pedestal CEO, LLC - All Rights Reserved