Peer-reviewed journal articles

1)-Crystallization-induced formation of rigid amorphous fraction

Maria Laura Di Lorenzo; Maria Cristina RighettiSUBJECTcalorimetrySUBJECTpolymer

crystallizationSUBJECTrigid amorphous fraction

Polymer crystallization Online 1 (2018).

https://dx.doi.org/10.1002/pcr2.10023

2)-Contribution of the rigid amorphous fraction to physical ageing of semi-crystalline PLLA

Righetti, Maria Cristina; Gazzano, Massimo; Delpouve, Nicolas; Saiter,

AllissonSUBJECTCrystallinitySUBJECTMobile amorphous fractionSUBJECTRigid amorphous

fractionSUBJECTInterphaseSUBJECTStructural relaxation

Polymer (Guildford) 125 (2017): 241–253.

https://dx.doi.org/10.1016/j.polymer.2017.07.089

3)-Effect of nucleating agents on crystallinity and properties of poly (lactic acid) (PTA)

Aliotta, Laura; Cinelli, Patrizia; Coltelli, Maria Beatrice; Righetti, Maria Cristina; Gazzano,

Massimo; Lazzeri, AndreaSUBJECTPoly(lactic acid)SUBJECTNucleating

agentSUBJECTMechanical propertiesSUBJECTTakayanagi modelSUBJECTCrystallinity

phases

European Polymer Journal 93 (2017): 822–832.

https://dx.doi.org/10.1016/j.eurpolymj.2017.04.041

4)-Low-temperature crystallization of poly(butylene succinate)

Di Lorenzo, Maria Laura; Androsch, Rene; Righetti, Maria CristinaSUBJECTPolymer

crystallizationSUBJECTPoly(butylene succinate)SUBJECTThermal analysis

European Polymer Journal 94 (2017): 384–391.

https://dx.doi.org/10.1016/j.eurpolymj.2017.07.025

5)-Crystallization of Polymers Investigated by Temperature-Modulated DSC

Righetti; Maria CristinaSUBJECTpolymerSUBJECTcrystallizationSUBJECTdifferential

scanning calorimetrySUBJECTtemperature-modulated differential scanning

calorimetrySUBJECTreversing meltingSUBJECTreversible meltingSUBJECTcrystalline

fractionSUBJECTmobile amorphous fractionSUBJECTrigid amorphous fraction

Materials (Basel) 10 (2017).

https://dx.doi.org/10.3390/ma10040442

6)-Endothermic features on heating of glasses show that the second glass to liquid transition

of water was phenomenologically-mistaken

Righetti, Maria Cristina; Tombari, Elpidio; Johari, G. P.SUBJECTGlass

transitionSUBJECTWaterSUBJECTPolymerSUBJECTGlass phenomenology

Thermochimica Acta 647 (2017): 101–110.

https://dx.doi.org/10.1016/j.tca.2016.11.011

7)-Rigid amorphous fraction and multiple melting behavior in poly(butylene terephthalate)

and isotactic polystyrene

Righetti, Maria Cristina; Di Lorenzo, Maria

LauraSUBJECTCrystallinitySUBJECTInterphaseSUBJECTMelting behaviorSUBJECTRigid

amorphous fraction

Journal of thermal analysis and calorimetry (Print) 126 (2016): 521–530.

https://dx.doi.org/10.1007/s10973-016-5553-0

8)-Time and Temperature Evolution of the Rigid Amorphous Fraction and Differently

Constrained Amorphous Fractions in PLLA

Righetti, Maria Cristina; Prevosto, Daniele; Tombari, ElpidioSUBJECTconstrained mobile

amorphous fractionSUBJECTcrystallinitySUBJECTdifferential scanning calorimetry

(DSC)SUBJECTinterfacesSUBJECTrigid amorphous fraction

Macromolecular chemistry and physics (Print) 217 (2016): 2013–2026.

https://dx.doi.org/10.1002/macp.201600210

9)-Aging kinetics of levoglucosan orientational glass as a rate dispersion process and

consequences for the heterogeneous dynamics view

Righetti, Maria Cristina; Tombari, Elpidio; Johari, G. P.SUBJECTaging

The Journal of chemical physics 145 (2016).

https://dx.doi.org/10.1063/1.4959806

10)-Thermodynamic study of heptane+amine mixtures. V. Excess and solvation Gibbs

energies

Lepori L.; Matteoli E.; Gianni P.; Righetti M.C.SUBJECTActivity

coefficientSUBJECTAminesSUBJECTExcess gibbs energySUBJECTGibbs energy of

solvationSUBJECTGroup contributionSUBJECTHeptaneSUBJECTVapour-liquid equilibrium

Fluid phase equilibria 387 (2015): 198–208.

https://dx.doi.org/10.1016/j.fluid.2014.12.017

11)-Evidences of Transesterification, Chain Branching and Cross-Linking in a Biopolyester

Commercial Blend upon Reaction with Dicumyl Peroxide in the Melt

Francesca Signori; Alessia Boggioni; Maria Cristina Righetti; Consuelo Escrig Rondan;

Simona Bronco; Francesco CiardelliSUBJECTBiodegradable polyester

blendSUBJECTBiodegradable thermoplasticSUBJECTECOVIOSUBJECTReactive

blendingSUBJECTPoly(lactic acid)

Macromolecular materials and engineering (Print) 300 (2015): 153–160.

https://dx.doi.org/10.1002/mame.201400187

12)-Enthalpy of melting of a'- and a-crystals of poly (L-lactic acid)

Maria Cristina Righetti; Massimo Gazzano; Maria Laura Di Lorenzo; René

AndroschSUBJECTPoly (L-lactic acid); Enthalpy of melting; a'- and a-crystals

European Polymer Journal 70 (2015): 221–220.

https://dx.doi.org/10.1016/j.eurpolymj.2015.07.024

13)-Enthalpy and entropy changes during physical ageing of 20% polystyrene - 80%

poly(alpha-methylstryrene) blend and the cooling rate effects

M.C. Righetti; G.P. JohariSUBJECTAgingSUBJECTEnthalpy and entropy

relaxationSUBJECTPolymeric Blends

Thermochimica Acta 307 (2015): 19–29.

https://dx.doi.org/10.1016/j.tca.2015.03.012

14)-Polycarbonate-based composites reinforced by in situ polytetrafluoroethylene fibrillation:

Preparation, thermal and rheological behavior

Antonioli, Diego; Sparnacci, Katia; Laus, Michele; Boarino, Luca; Righetti, Maria

CristinaSUBJECTcompositesSUBJECTrheologySUBJECTthermal properties

Journal of applied polymer science (Print) 132 (2015): 42401.

https://dx.doi.org/10.1002/app.42401

15)-The Irreversible Tetragonal to Trigonal Transformation in Random Butene-1/Ethylene

Copolymers

Di Lorenzo, Maria Laura; Androsch, Rene; Righetti, Maria CristinaSUBJECTRIGID

AMORPHOUS FRACTIONSUBJECTPOLYMORPHIC

TRANSFORMATIONSUBJECTISOTACTIC POLYBUTENE-

1SUBJECTPOLY(ETHYLENE-TEREPHTHALATE)SUBJECTCRYSTALLIZATION

BEHAVIOR

AIP conference proceedings 1695 (2015).

https://dx.doi.org/10.1063/1.4937318

16)-Conformationally disordered crystals and their influence on material properties: The

cases of isotactic polypropylene, isotactic poly(1-butene), and poly(L-lactic acid)

Mariacristina Cocca; René Androsch; Maria Cristina Righetti; Mario Malinconico; Maria Laura

Di LorenzoSUBJECTCrystal polymorphism; Conformational disorder; Condis mesophase;

Isotactic polypropylene; Isotactic poly(1-butene); Poly(L-lactic acid)

Journal of molecular structure (Print) (2014).

https://dx.doi.org/10.1016/j.molstruc.2014.02.038

17)-Rigid amorphous fraction and melting behavior of poly(ethylene terephthalate)

Maria Cristina Righetti; Michele Laus; Maria Laura Di Lorenzo

Colloid and polymer science (Print) 292 (2014): 1365–1374.

https://dx.doi.org/10.1007/s00396-014-3198-8

18)-Temperature Dependence of the Rigid Amorphous Fraction in Poly(ethylene

terephthalate)

Maria Cristina Righetti; Michele Laus; Maria Laura Di Lorenzo

European Polymer Journal 58 (2014): 60–68.

https://dx.doi.org/10.1016/j.eurpolymj.2014.06.005

19)-Volumetric investigation of the ternary system ethanol plus dimethylformamide plus

cyclohexane at 298.15 K

Gianni, P.; Lepori, L.; Matteoli, E.; Righetti, M. C.SUBJECTExcess

volumeSUBJECTApparent molar volumeSUBJECTTernary

mixtureSUBJECTDensitySUBJECTAssociation

Fluid phase equilibria 368 (2014): 112–119.

https://dx.doi.org/10.1016/j.fluid.2014.01.046

20)-Preparation and Properties of PTFE/PAI Nanocomposites

D. Antonioli; K. Sparnacci; M. Laus; L. Boarino; M.C. Righetti

Polymer composites (Online) 34 (2013): 1451–1459.

https://dx.doi.org/10.1002/pc.22444

21)-Thermal and mechanical properties of PES/PTFE composites and nanocomposites

M.C. Righetti; A. Boggioni; M. Laus; D. Antonioli; K. Sparnacci; L. Boarino

Journal of applied polymer science (Print) 130 (2013): 3624.

https://dx.doi.org/10.1002/app.39613

22)-Excess Gibbs Energies and Volumes of the ternary system ethanol + dimethylformamide

+ tetrahydrofuran at 298.15 K

E. Matteoli; L. Lepori; P. Gianni; M.C. Righetti

Fluid phase equilibria 356 (2013): 157–167.

https://dx.doi.org/10.1016/j.fluid.2013.07.034

23)-Physical ageing reduction in PES through the incorporation of rigid non-interacting

PTFE nanoparticles

M.C. Righetti. A. Boggioni; M. Laus; D. Antonioli; K. Sparnacci; E. Enrico; L. Boarino

Thermochimica Acta 571 (2013): 53–59.

https://dx.doi.org/10.1016/j.tca.2013.09.029

24)-The role of the crystallization temperature on the nanophase structure evolution of

poly[(R)-3-hydroxybutyrate]

M.C. Righetti; E. Tombari; M.L. Di Lorenzo

The journal of physical chemistry. B 117 (2013): 12303–12311.

https://dx.doi.org/10.1021/jp4063127

25)-Effect of thermal history on the evolution of crystal and amorphous fractions of poly[(R)-

3-hydroxybutyrate] upon storage at ambient temperature

M. L. Di Lorenzo; M.C. Righetti

European Polymer Journal 49 (2013): 510–517.

https://dx.doi.org/10.1016/j.eurpolymj.2012.11.004

26)-Evolution of crystal and amorphous fractions of poly[(R)-3-hydroxybutyrate] upon

storage

Di Lorenzo; M.L.; Righetti; M.C.

Journal of thermal analysis and calorimetry (Print) 112 (2013): 1439–1446.

https://dx.doi.org/10.1007/s10973-012-2734-3

27)-Amorphous/Crystal and Polymer/Filler Interphases in Biocomposites from Poly(butylene

succinate)

Signori F.; Pelagaggi M.; Bronco S.; Righetti M.C.

Thermochimica Acta 543 (2012): 74–81.

https://dx.doi.org/10.1016/j.tca.2012.05.006

28)-The role of the rigid amorphous fraction on cold crystallization of poly(3-

hydroxybutyrate)

Di Lorenzo M.L.; Gazzano M.; Righetti M.C.

Macromolecules (Online) 45 (2012): 5684–5691.

https://dx.doi.org/10.1021/ma3010907l

29)-Nonlinear determination of the equilibrium melting temperature from initial

nonreorganized crytals of poly(3-hydroxybutyrate)

Righetti M.C.; Di Lorenzo M.L.

Polymer engineering and science (Online) 52 (2012): 2383–2390.

https://dx.doi.org/10.1002/pen.23199

30)-Preparation and Properties of PTFE-PMMA Core-Shell Nanoparticles and

Nanocomposites

Antonioli D.; Laus M.; Zuccheri G.; Kapeliouchko V.; Righetti M.C.; Boarino L.; Sparnacci K.

Journal of Nanotechnology (Online) 2012 (2012): 875815.

https://dx.doi.org/10.1155/2012/875815

31)-Crystalline, mobile amorphous and rigid amorphous fractions in poly(L-lactic acid) by

TMDSC

Righetti M.C.; Tombari E.SUBJECTthree-phase modelSUBJECTcrystalline

fractionSUBJECTrigid amorphous fractionSUBJECTmobile amorphous

fractionSUBJECTchain mobility

522 (2011): 118–127.

http://www.cnr.it/prodotto/i/40692

info:cnr-pdr/source/autori:Righetti M.C., Tombari E./titolo:Crystalline, mobile amorphous and

rigid amorphous fractions in poly(L-lactic acid) by TMDSC/

32)-Melting temperature evolution of non-reorganized crystals. Poly(3-hydroxybutyrate)

Righetti M.C.; Di Lorenzo M.L.SUBJECTSuperheatingSUBJECTThermal

lagSUBJECTReorganizationSUBJECTsuperheatingSUBJECTthermal

lagSUBJECTreorganization

512 (2011): 59–66.

http://www.cnr.it/prodotto/i/168983

info:cnr-pdr/source/autori:Righetti M.C.; Di Lorenzo M.L./titolo:Melting temperature evolution

of non-reorganized crystals. Poly(3-hydroxybutyrate)/

33)-Coupling between crystal melting and rigid amorphous fraction mobilization in

poly(ethylene terephthalate)

Di Lorenzo M.L.; Righetti M.C.; Cocca M.; Wunderlich B.

Macromolecules (Print) 43 (2010): 7689–7694.

https://dx.doi.org/10.1021/ma101035h

34)-Calorimetry for Fast Authentication of Edible Oils

Angiuli M.; Bussolino G.C.; Ferrari C.; Matteoli E.; Righetti M.C.; Salvetti G., Tombari

E.SUBJECTDSCSUBJECTEdible oil authenticationSUBJECToil phase

transitionSUBJECTolive oilSUBJECTpolymorphism

International journal of thermophysics 30 (2009): 1014–1024.

http://www.cnr.it/prodotto/i/40423

info:cnr-pdr/source/autori:Angiuli M.; Bussolino G.C.; Ferrari C.; Matteoli E.; Righetti M.C.;

Salvetti G., Tombari E./titolo:Calorimetry for Fast Authentication of Edible Oils/

35)-Vitrification and devitrification of the rigid amorphous fraction in poly(ethylene

terephthalate)

Righetti M.C.; Di Lorenzo M.L.

E-Polymers 053 (2009).

http://www.cnr.it/prodotto/i/167274

info:cnr-pdr/source/autori:Righetti M.C.; Di Lorenzo M.L./titolo:Vitrification and

devitrification of the rigid amorphous fraction in poly(ethylene terephthalate)/

36)-Influence of crystal polymorphism on the three-phase structure and on the thermal

properties of isotactic poly(1-butene)

M. L. Di Lorenzo; M. C. Righetti; B. Wunderlich

Macromolecules (Print) 42 (2009): 9312–9320.

https://dx.doi.org/10.1021/ma901882g

37)-Crystalline, mobile amorphous and rigid amorphous fractions in isotactic polystyrene

M. C. Righetti; E. Tombari; M. L. Di Lorenzo

European Polymer Journal 44 (2008): 2659–2667.

http://www.cnr.it/prodotto/i/18103

info:cnr-pdr/source/autori:M. C. Righetti, E. Tombari, M. L. Di Lorenzo/titolo:Crystalline,

mobile amorphous and rigid amorphous fractions in isotactic polystyrene/

38)-ERRATUM to Enthalpy-based determination of crystalline, mobile amorphous and rigid

amorphous fractions in semicrystalline polymers Poly(ethylene terephthalate)

Righetti M.C.; Tombari E.; Angiuli M.; Di Lorenzo M.L.

467 (2008): 121.

http://www.cnr.it/prodotto/i/39991

info:cnr-pdr/source/autori:Righetti M.C., Tombari E., Angiuli M., Di Lorenzo

M.L./titolo:ERRATUM to Enthalpy-based determination of crystalline, mobile amorphous and

rigid amorphous fractions in semicrystalline polymers Poly(ethylene terephthalate)/

39)-Crystalline, mobile Amorphous and rigid amorphous fractions in isotactic polystyrene

Righetti M.C.; Tombari E.; Di Lorenzo M.L.SUBJECTisotactic polystyreneSUBJECTthree-

phase systemSUBJECTrigid amorphous fraction

European Polymer Journal 44 (2008): 2659–2667.

http://www.cnr.it/prodotto/i/39992

info:cnr-pdr/source/autori:Righetti M.C., Tombari E., Di Lorenzo M.L./titolo:Crystalline,

mobile Amorphous and rigid amorphous fractions in isotactic polystyrene/

40)-The three-phase structure of isotactic poly(1-butene)

Di Lorenzo M.L.; Righetti M.C.

Polymer (Guildford) 49 (2008): 1323–1331.

https://dx.doi.org/10.1016/j.polymer.2008.01.026

41)-The Low-Temperature Endotherm in Poly(ethylene terephthalate): Partial Melting and

Rigid Amorphous Fraction Mobilization

M.C. Righetti; M.L. Di Lorenzo; E. Tombari; M. Angiuli

The journal of physical chemistry. B 112 (2008): 4233–4241.

http://www.cnr.it/prodotto/i/171517

info:cnr-pdr/source/autori:M.C. Righetti; M.L. Di Lorenzo; E. Tombari; M. Angiuli/titolo:The

Low-Temperature Endotherm in Poly(ethylene terephthalate): Partial Melting and Rigid

Amorphous Fraction Mobilization/

42)-Enthalpy-based determination of crystalline, mobile amorphous and rigid amorphous

fractions in semicrystalline polymers. Poly(ethylene terephthalate) (vol 462, pg 15, 2007)

Righetti, Maria Cristina; Tombari, Elpidio; Angiuli, Marco; Di Lorenzo, Maria

LauraSUBJECTThree-phase system; Crystalline fraction; Mobile amorphous fraction; Rigid

amorphous fraction; Enthalpy

Thermochimica Acta 467 (2008): 121–121.

https://dx.doi.org/10.1016/j.tca.2007.10.019

43)-Poly(butylene terephthalate)/Poly(e-caprolactone) blends: Miscibility and thermal and

mechanical properties

Di Lorenzo, M. L.; La Pietra, P.; Errico, M. E.; Righetti, M. C.; Angiuli,

M.SUBJECTConcentrationSUBJECTMechanical propertiesSUBJECTMolar

massSUBJECTPolyethylene terephthalatesSUBJECTPolymer blends

Polymer engineering and science 47 (2007): 323–329.

https://dx.doi.org/10.1002/pen.20711

44)-Poly(butylene terephthalate)/poly(epsilon-caprolactone) blends: Miscibility and thermal

and mechanical properties.

Di Lorenzo M.L.; La Pietra P.; Errico M.E.; Righetti M.C.; Angiuli

M.SUBJECTPOLYCARBONATE POLY(ETHYLENE-TEREPHTHALATE)

BLENDSSUBJECTESTER-INTERCHANGE REACTIONSSUBJECTTRANS-

ESTERIFICATIONSUBJECTMOLECULAR-WEIGHTSUBJECTPOLYMER BLENDS

Polymer engineering and science 47 (2007): 323–329.

http://www.cnr.it/prodotto/i/39487

info:cnr-pdr/source/autori:Di Lorenzo M.L., La Pietra P., Errico M.E., Righetti M.C., Angiuli

M./titolo:Poly(butylene terephthalate)/poly(epsilon-caprolactone) blends: Miscibility and

thermal and mechanical properties./

45)-Calorimetry of edible oils: Isothermal freezing curve for assessing extra-virgin olive oil

storage history

Angiuli Marco; Ferrari Carlo; Righetti Maria Cristina; Tombari Elpidio; Salvetti

GiuseppeSUBJECTolive oil calorimetrySUBJECTlight and dark storageSUBJECTolive oil

phase

European journal of lipid science and technology (Print) 109 (2007): 1010–1014.

http://www.cnr.it/prodotto/i/39800

info:cnr-pdr/source/autori:Angiuli Marco, Ferrari Carlo, Righetti Maria Cristina,Tombari

Elpidio, Salvetti Giuseppe/titolo:Calorimetry of edible oils: Isothermal freezing curve for

assessing extra-virgin olive oil storage history/

46)-Promoting calorimetry for olive oil authentication

Ferrari C.; Angiuli M.; Tombari E.; Righetti M.C.; Matteoli E.; Salvetti G.SUBJECTisothermal

crystallizationSUBJECTmeltingSUBJECTdifferential scanning calorimetrySUBJECTolive oil

authenticationSUBJECTpolymorphism

Thermochimica Acta 459 (2007): 58–63.

http://www.cnr.it/prodotto/i/39802

info:cnr-pdr/source/autori:Ferrari C., Angiuli M., Tombari E., Righetti M.C., Matteoli E.,

Salvetti G./titolo:Promoting calorimetry for olive oil authentication/

47)-Poly(butylene terephthalate)/poly(epsilon-caprolactone) blends: Influence of PCL

molecular mass on PBT melting and crystallization behavior

Righetti M.C.; Di Lorenzo M.L.; Angiuli M.; Tombari E.; La Pietra P.SUBJECTPolymeric

blendSUBJECTCrystallization kineticsSUBJECTMelting behaviorSUBJECTDSC (differential

scanning calorimetry)SUBJECTOptical microscopy

European Polymer Journal 43 (2007): 4726–4738.

http://www.cnr.it/prodotto/i/39803

info:cnr-pdr/source/autori:Righetti M.C., Di Lorenzo M.L., Angiuli M., Tombari E., La Pietra

P./titolo:Poly(butylene terephthalate)/poly(epsilon-caprolactone) blends: Influence of PCL

molecular mass on PBT melting and crystallization behavior/

48)-Enthalpy-based determination of crystalline, mobile amorphous and rigid amorphous

fractions in semicrystalline polymers - Poly(ethylene terephthalate)

M. C. Righetti; E. Tombari; M. Angiuli; M. L. Di LorenzoSUBJECTthree-phase

systemSUBJECTcrystalline fractionSUBJECTmobile amorphous fractionSUBJECTrigid

amorphous fractionSUBJECTenthalpy

Thermochimica Acta 462 (2007): 15–24.

http://www.cnr.it/prodotto/i/169223

info:cnr-pdr/source/autori:M. C. Righetti, E. Tombari, M. Angiuli, M. L. Di

Lorenzo/titolo:Enthalpy-based determination of crystalline, mobile amorphous and rigid

amorphous fractions in semicrystalline polymers - Poly(ethylene terephthalate)/

49)-Self-decelerated crystallization in poly(butylene terephthalate)/poly(e-caprolactone)

blends

Di Lorenzo M.L.; Righetti

M.C.SUBJECTblendsSUBJECTcrystallizationSUBJECTdiffusionSUBJECTmiscibility

Journal of polymer science. Part B, Polymer physics 45 (2007): 3148–3155.

http://www.cnr.it/prodotto/i/169579

info:cnr-pdr/source/autori:Di Lorenzo M.L., Righetti M.C./titolo:Self-decelerated

crystallization in poly(butylene terephthalate)/poly(e-caprolactone) blends/

50)-Morphological analysis of poly(butylene terephthalate) spherulites during fusion

M. L. Di Lorenzo; M. C. RighettiSUBJECTDIFFERENTIAL SCANNING

CALORIMETRYSUBJECTRATESSUBJECTCRYSTALLIZATIONSUBJECTBEHAVIOR

Polymer bulletin (Berl., Print) 53 (2004): 53–62.

http://www.cnr.it/prodotto/i/168986

info:cnr-pdr/source/autori:M. L. Di Lorenzo, M. C. Righetti/titolo:Morphological analysis of

poly(butylene terephthalate) spherulites during fusion/

51)-Melting process of poly(butylene terephthalate) analyzed by temperature modulated

differential scanning calorimetry

M. C. Righetti; M. L. Di LorenzoSUBJECTHEAT-CAPACITYSUBJECTISOTHERMAL

CRYSTALLIZATIONSUBJECTREVERSIBLE

CRYSTALLIZATIONSUBJECTTHERMODYNAMIC PROPERTIESSUBJECTPOLYMERS

Journal of polymer science. Part B, Polymer physics 42 (2004): 2191–2201.

http://www.cnr.it/prodotto/i/168989

info:cnr-pdr/source/autori:M. C. Righetti, M. L. Di Lorenzo/titolo:Melting process of

poly(butylene terephthalate) analyzed by temperature modulated differential scanning

calorimetry/

52)-Structural reorganization in poly(butylene terephthalate) during fusion

Righetti M.C.; Di Lorenzo M.L.; Angiuli M.; Tombari ESUBJECTDIFFERENTIAL

SCANNING CALORIMETRYSUBJECTTEMPERATURE-MODULATED

CALORIMETRYSUBJECTHEAT-CAPACITYSUBJECTREVERSIBLE

Macromolecules (Print) 37 (2004): 9027–9033.

http://www.cnr.it/prodotto/i/169581

info:cnr-pdr/source/autori:Righetti M.C.; Di Lorenzo M.L.; Angiuli M.; Tombari

E/titolo:Structural reorganization in poly(butylene terephthalate) during fusion/

53)-Crystallization of Poly(butylene terephthalate)

M.L. Di Lorenzo; M.C. Righetti

Polymer engineering and science (Online) 43 (2003): 1889–1894.

http://www.cnr.it/prodotto/i/170001

info:cnr-pdr/source/autori:M.L. Di Lorenzo, M.C. Righetti/titolo:Crystallization of

Poly(butylene terephthalate)/

54)-Thermodynamics of mixing of poly(vinyl chloride) and poly(ethylene-co-vinyl acetate)

Righetti M.C.; Cardelli C.; Scalari M.; Tombari E.; Conti G.

Polymer (Guildford) 43 (2002): 5035–5042.

http://www.cnr.it/prodotto/i/172977

info:cnr-pdr/source/autori:Righetti M.C., Cardelli C., Scalari M., Tombari E., Conti

G./titolo:Thermodynamics of mixing of poly(vinyl chloride) and poly(ethylene-co-vinyl

acetate)/

===================================================================

Other publications (journals without peer review, book reviews,etc.)

1)-Amorphous fractions of poly(lactic acid)

Righetti M.C.SUBJECTCrystallinitySUBJECTInterphaseSUBJECTMobile amorphous

fractionSUBJECTrigid amorphpus fraction

Synthesis, Structure and Properties of Poly(lactic acid), edited by Maria Laura Di Lorenzo,

René Androsch, pp. 195–234. Berlin: Springer International Publishing AG, 2018

https://dx.doi.org/10.1007/12_2016_14

info:cnr-pdr/source/autori:Righetti M.C./titolo:Amorphous fractions of poly(lactic

acid)/titolo_volume:Synthesis, Structure and Properties of Poly(lactic

acid)/curatori_volume:Maria Laura Di Lorenzo, René Androsch/editore:

/anno:2018

2)-Analysis of polymer crystallization by calorimetry

M. L. Di Lorenzo; R. Androsch; A. M. Rhoades; M. C. RighettiSUBJECTPolymer

crystallizationSUBJECTcalorimetry

Handbook of Thermal Analysis and Calorimetry: Recent Advances, Techniques and

Applications, Volume 6, 2nd Edition, edited by S. Vyazovkin, N. Koga, C. Schick, pp. 253–299.

Amsterdam: Elsevier BV, 2018

https://www.sciencedirect.com/science/article/pii/B9780444640628000073?via%3Dihub

info:cnr-pdr/source/autori:M. L. Di Lorenzo, R. Androsch, A. M. Rhoades, M. C.

Righetti/titolo:Analysis of polymer crystallization by calorimetry/titolo_volume:Handbook of

Thermal Analysis and Calorimetry: Recent Advances, Techniques and Applications, Volume 6,

2nd Edition/curatori_volume:S. Vyazovkin, N. Koga, C. Schick/editore:

/anno:2018

3)-Physical ageing of semi-crystalline PLLA: Role of the differently constrained amorphous

fractions

M.C. Righetti; N. Delpouve; A. SaiterSUBJECTPoly(L-lactic acid); Physical

ageingSUBJECTStructural relaxationSUBJECTConstrained amorphous fraction

TOP Conference 2018, Ischia, 17-21 June 2018

http://www.cnr.it/prodotto/i/397926

info:cnr-pdr/source/autori:M.C. Righetti, N. Delpouve, A. Saiter/congresso_nome:TOP

Conference 2018/congresso_luogo:Ischia/congresso_data:17-21 June

2018/anno:2018/pagina_da:/pagina_a:/intervallo_pagine:

4)-Effect of different nucleating agent on crystallinity and properties of polylactic acid

L. Aliotta; P. Cinelli; M.C. Righetti; M.B. Coltelli; A. LazzeriSUBJECTNucleating

agentsSUBJECTCrystallinitySUBJECTMechanical propertiesSUBJECTPoly(lactic acid).

TOP Conference 2018, Ischia, 17-21 June 2018

http://www.cnr.it/prodotto/i/397927

info:cnr-pdr/source/autori:L. Aliotta, P. Cinelli, M.C. Righetti, M.B. Coltelli, A.

Lazzeri/congresso_nome:TOP Conference 2018/congresso_luogo:Ischia/congresso_data:17-21

June 2018/anno:2018/pagina_da:/pagina_a:/intervallo_pagine:

5)-Melting behaviour and rigid amorphous fraction in semi-crystalline polymers

M. C. Righetti; M. L. Di LorenzoSUBJECTPolymer meltingSUBJECTRigid amorphous fraction

Frontiers in Polymer Science, pp. 91, Riva del Garda, 20/05/2015, 22/05/2015

http://www.cnr.it/prodotto/i/388041

info:cnr-pdr/source/autori:M. C. Righetti, M. L. Di Lorenzo/congresso_nome:Frontiers in

Polymer Science/congresso_luogo:Riva del Garda/congresso_data:20/05/2015,

22/05/2015/anno:2015/pagina_da:91/pagina_a:/intervallo_pagine:91

6)-The influence of rigid amorphous fraction on crystallization kinetics of poly[(R)-3-

hydroxybutyrate] and its role on properties deterioration upon storage

M. L. Di Lorenzo; M.C. RighettiSUBJECTPoly[(R)-3-hydroxybutyrate]SUBJECTRigid

amorphous fractionSUBJECTCrystallization kinetics

Workshop "IUPAC Italia: stato dell'arte e strategie future", Roma, 8 aprile 2014

http://www.cnr.it/prodotto/i/388038

info:cnr-pdr/source/autori:M. L. Di Lorenzo, M.C. Righetti/congresso_nome:Workshop "IUPAC

Italia: stato dell'arte e strategie future"/congresso_luogo:Roma/congresso_data:8 aprile

2014/anno:2014/pagina_da:/pagina_a:/intervallo_pagine:

7)-Rigid amorphous fraction evolution during crystallization in PLLA and PHB

M.C. Righetti; E. Tombari

EPF2013 Pisa 16-21 giugno 2013, 2013

http://www.cnr.it/prodotto/i/296314

info:cnr-pdr/source/autori:M.C. Righetti, E. Tombari/congresso_nome:EPF2013 Pisa 16-21

giugno

2013/congresso_luogo:/congresso_data:2013/anno:2013/pagina_da:/pagina_a:/intervallo_pagine

:

8)-Competition Between Crystallization and Vitrification of the Rigid Amorphous Fraction in

Poly(3-Hydroxybutyrate)

Di Lorenzo M.L.; Righetti M.C.; Gazzano M.

6th International Conference on Times of Polymers (TOP) and Composites, pp. 36–38, Ischia,

ITALY, JUN 10-14, 2012

https://dx.doi.org/10.1063/1.4738390

info:cnr-pdr/source/autori:Di Lorenzo M.L., Righetti M.C., Gazzano M./congresso_nome:6th

International Conference on Times of Polymers (TOP) and Composites/congresso_luogo:Ischia,

ITALY/congresso_data:JUN 10-14,

2012/anno:2012/pagina_da:36/pagina_a:38/intervallo_pagine:36–38

9)-Composites from biodegradable polyesters and hemp fibers: an effort towards the

enlightenment of polymer matrix-fiber interactions

Signori F.; Pelagaggi M.; Righetti M.C.; Bronco S.; Ciardelli F.

Hybrid Materials 2011, Strasbourg (France), 2011

http://www.cnr.it/prodotto/i/172687

info:cnr-pdr/source/autori:Signori F., Pelagaggi M., Righetti M.C., Bronco S., Ciardelli

F./congresso_nome:Hybrid Materials 2011/congresso_luogo:Strasbourg

(France)/congresso_data:2011/anno:2011/pagina_da:/pagina_a:/intervallo_pagine:

10)-Coupling between crystal fusion and mobilization of the rigid amorphous fraction in

poly(ethylene terephthalate)

M. L. Di Lorenzo; M. C. Righetti; M. Cocca; B. Wunderlich

11th Lähnwitzseminar on Calorimetry, Rostock (Germania) 6-11 giugno 2010., Rostock, 2010

http://www.cnr.it/prodotto/i/172258

info:cnr-pdr/source/autori:M. L. Di Lorenzo, M. C. Righetti, M. Cocca, B.

Wunderlich/congresso_nome:11th Lähnwitzseminar on Calorimetry, Rostock (Germania) 6-11

giugno

2010./congresso_luogo:Rostock/congresso_data:2010/anno:2010/pagina_da:/pagina_a:/interval

lo_pagine:

11)-Calorimetry for edible oil authentication

R. Ambrosetti; M. Angiuli; G. C. Bussolino; C. Ferrari; L. Lepori; E. Matteoli; D. Ricci; M. C.

Righetti; G. Salvetti; E. Tombari.

XIII Convegno AIPT (Associazione Italiana Proprietà termofisiche), pp. 25–36, Trento, 2007

urn:isbn:978-88-87380-62-0

info:cnr-pdr/source/autori:R. Ambrosetti, M. Angiuli, G. C. Bussolino, C. Ferrari, L. Lepori, E.

Matteoli, D. Ricci, M. C. Righetti, G. Salvetti, E. Tombari./congresso_nome:XIII Convegno

AIPT (Associazione Italiana Proprietà

termofisiche)/congresso_luogo:Trento/congresso_data:2007/anno:2008/pagina_da:25/pagina_a:

36/intervallo_pagine:25–36

12)-Enthalpy based determination of cristalline, mobile amorphous and rigid amorphouas

fractions in

Righetti M.C.; Tombari E.; Di Lorenzo; M.L.

“10th Lähnwitzseminar on Calorimetry”, 8-13 June 2008, Rostock, Germany., 2008

http://www.cnr.it/prodotto/i/116990

info:cnr-pdr/source/autori:Righetti M.C., Tombari E., Di Lorenzo,

M.L./congresso_nome:“10th Lähnwitzseminar on Calorimetry”, 8-13 June

2008/congresso_luogo:Rostock,

Germany./congresso_data:2008/anno:2008/pagina_da:/pagina_a:/intervallo_pagine:

13)-Metodi fisici per test d’identificazione rapida della varietà dei semi di girasole e della

qualità dell’olio estratto

Salvetti G.;

PI2008A000065, Nazionale

http://www.cnr.it/prodotto/i/144984

14)-The low temperature endotherm in poly(ethylene terephthalate): partial melting and rigid

amorphous fraction mobilization

Righetti M.C.; Di Lorenzo M.L.; Tombari E.

XXX National Congress on calorimetry, Thermal Analysis and Chemical Thermodynamics

Pisa, 9-12/12/2008, Pisa, 2008

http://www.cnr.it/prodotto/i/173597

info:cnr-pdr/source/autori:Righetti M.C., Di Lorenzo M.L., Tombari E./congresso_nome:XXX

National Congress on calorimetry, Thermal Analysis and Chemical Thermodynamics Pisa, 9-

12/12/2008/congresso_luogo:Pisa/congresso_data:2008/anno:2008/pagina_da:/pagina_a:/interv

allo_pagine:

15)-Calorimetric authentication of Italian monocultivar EVOOs

M. Angiuli (1); C. Ferrari (1); M.C. Righetti (1); G. Salvetti (1); E. Tombari (1); G. Colella (2);

L. Damico (2); G. Mita (2)

20° Congresso della Società Italiana per lo Studio delle Sostanze Grasse, Roma, 2007

http://www.cnr.it/prodotto/i/116820

info:cnr-pdr/source/autori:M. Angiuli (1), C. Ferrari (1), M.C. Righetti (1), G. Salvetti (1), E.

Tombari (1), G. Colella (2), L. Damico (2), G. Mita (2)/congresso_nome:20° Congresso della

Società Italiana per lo Studio delle Sostanze

Grasse/congresso_luogo:Roma/congresso_data:2007/anno:2007/pagina_da:/pagina_a:/intervall

o_pagine:

16)-Light induced oxidation of Italian monocultivar EVOOs: a calorimetric study

M. Angiuli (1); C. Ferrari (1); M.C. Righetti (1); G. Salvetti (1); E. Tombari (1); A. Mattei (2)

0° Congresso della Società Italiana per lo Studio delle Sostanze Grasse, Roma, 2007

http://www.cnr.it/prodotto/i/116821

info:cnr-pdr/source/autori:M. Angiuli (1), C. Ferrari (1), M.C. Righetti (1), G. Salvetti (1), E.

Tombari (1), A. Mattei (2)/congresso_nome:0° Congresso della Società Italiana per lo Studio

delle Sostanze

Grasse/congresso_luogo:Roma/congresso_data:2007/anno:2007/pagina_da:/pagina_a:/intervall

o_pagine:

17)-Multiple Melting Behavior in Poly(butylene terephthalate): Calorimetric and

Morphological Analyses

Di Lorenzo M.L.; Righetti M.C.

, 2007

http://www.cnr.it/prodotto/i/172243

info:cnr-pdr/source/autori:Di Lorenzo M.L., Righetti M.C./titolo:Multiple Melting Behavior in

Poly(butylene terephthalate): Calorimetric and Morphological

Analyses/titolo_volume:/curatori_volume:/editore:/anno:2007

18)-Fast authentication of Extra Virgin Olive Oil by DSC calorimetry

E. Tombari (1); M. Angiuli (1); C. Ferrari (1); M.C. Righetti (1); G. Salvetti (1); A. Mattei (2);

O. Lorenzini (2)

4th Euro Fed Lipid Congress: Oils, Fats and Lipids for a Healthier Future, Madrid, Spagna,

2006

http://www.cnr.it/prodotto/i/116711

info:cnr-pdr/source/autori:E. Tombari (1), M. Angiuli (1), C. Ferrari (1), M.C. Righetti (1), G.

Salvetti (1), A. Mattei (2), O. Lorenzini (2)/congresso_nome:4th Euro Fed Lipid Congress:

Oils, Fats and Lipids for a Healthier Future/congresso_luogo:Madrid,

Spagna/congresso_data:2006/anno:2006/pagina_da:/pagina_a:/intervallo_pagine:

19)-Fast Authentication Of Edible Oils By DSC Calorimetry

G. Salvetti (1); M. Angiuli (1); C. Ferrari (1); M.C. Righetti (1); E. Tombari (1); O. Lorenzini

(2); A. Mattei (2)

CALCAT ’06: Calorimetry and Thermal Analysis Conference, Santiago de Compostela,

Spagna, 2006

http://www.cnr.it/prodotto/i/116747

info:cnr-pdr/source/autori:G. Salvetti (1), M. Angiuli (1), C. Ferrari (1), M.C. Righetti (1), E.

Tombari (1), O. Lorenzini (2), A. Mattei (2)/congresso_nome:CALCAT ’06: Calorimetry and

Thermal Analysis Conference/congresso_luogo:Santiago de Compostela,

Spagna/congresso_data:2006/anno:2006/pagina_da:/pagina_a:/intervallo_pagine:

20)-Adulterazioni dell’olio di oliva extra vergine per aggiunta di olio di semi rilevabili con

calorimetria DSC

E. Tombari (1); M. Angiuli (1); C. Ferrari (1); M. C. Righetti (1); G. Salvetti (1); A. Mattei (2);

O. Lorenzini (2)

Pinerolo: Chiriotti, 2006

http://www.cnr.it/prodotto/i/137239

info:cnr-pdr/source/autori:E. Tombari (1), M. Angiuli (1), C. Ferrari (1), M. C. Righetti (1), G.

Salvetti (1), A. Mattei (2), O. Lorenzini (2)/titolo:Adulterazioni dell’olio di oliva extra vergine

per aggiunta di olio di semi rilevabili con calorimetria DSC/editore:

/anno:2006

21)-Adulterazioni dell’olio di oliva extra vergine per aggiunta di olio di semi rilevabili con

calorimetria DSC

E. Tombari (1); M. Angiuli (1); C. Ferrari (1); M.C. Righetti (1); G. Salvetti (1); A. Mattei (2);

O. Lorenzini (2)

7° Congresso Italiano di Scienza e Tecnologia degli Alimenti (CISETA), Cernobbio (C0), 2005

http://www.cnr.it/prodotto/i/116710

info:cnr-pdr/source/autori:E. Tombari (1), M. Angiuli (1), C. Ferrari (1), M.C. Righetti (1), G.

Salvetti (1), A. Mattei (2), O. Lorenzini (2)/congresso_nome:7° Congresso Italiano di Scienza e

Tecnologia degli Alimenti (CISETA)/congresso_luogo:Cernobbio

(C0)/congresso_data:2005/anno:2005/pagina_da:/pagina_a:/intervallo_pagine:

22)-THERMODYNAMICS OF MIIXING, DIELECTRIC RELAXATION

E. Tombari; M.C. Righetti; M. Scalari; G. Conti

AIM - XVI Convegno Italiano di Scienza e Tecnologia delle Macromolecole, Pisa, 2003

http://www.cnr.it/prodotto/i/116424

info:cnr-pdr/source/autori:E. Tombari, M.C. Righetti, M. Scalari, G.

Conti/congresso_nome:AIM - XVI Convegno Italiano di Scienza e Tecnologia delle

Macromolecole/congresso_luogo:Pisa/congresso_data:2003/anno:2003/pagina_da:/pagina_a:/in

tervallo_pagine:

23)-Cristallizzazione e morfologia del poli(butilene tereftalato)

Di Lorenzo M.L.; Righetti M.C.

AIM - XVI Convegno Italiano di Scienza e Tecnologia delle Macromolecole, Pisa, 2003

http://www.cnr.it/prodotto/i/172841

info:cnr-pdr/source/autori:Di Lorenzo M.L., Righetti M.C./congresso_nome:AIM - XVI

Convegno Italiano di Scienza e Tecnologia delle

Macromolecole/congresso_luogo:Pisa/congresso_data:2003/anno:2003/pagina_da:/pagina_a:/in

tervallo_pagine:

24)-La calorimetria modulata nello studio della fusione dei polimeri: poli(butilene tereftalato)

Di Lorenzo M.L.; Righetti M.C.

XVI Convegno italiano di scienza e tecnologia delle macromolecole, Pisa, 2003

http://www.cnr.it/prodotto/i/174022

info:cnr-pdr/source/autori:Di Lorenzo M.L., Righetti M.C./congresso_nome:XVI Convegno

italiano di scienza e tecnologia delle

macromolecole/congresso_luogo:Pisa/congresso_data:2003/anno:2003/pagina_da:/pagina_a:/in

tervallo_pagine: