+ All Categories
Home > Documents > Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

Date post: 03-Jan-2016
Category:
Upload: damian-butler
View: 217 times
Download: 3 times
Share this document with a friend
Popular Tags:
22
Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls
Transcript
Page 1: Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

Pennsylvania Bureau of Deep Mine Safety

Slips, Trips and Falls

Page 2: Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

The Big Picture

Where are you more likely to receive a disabling injury?

Page 3: Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

The Big Picture

Page 4: Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

What causes the most fatal accidents?

Page 5: Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

The Big Picture Total Fatal Accidents Nationwide

• Motor Vehicle 41,200

• Falls 16,600• Poisoning 8,400

• Drowning 4,100

• Fires and Burns 3,700

• Top 5 since 1970National Safety Council 1998

Page 6: Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

Length of employment

0%

5%

10%

15%

20%

25%

30%

35%

40%

6 mo or<7-12 mo1-3 years3-5 years5-10years>10 yearsunknown

NIOSH 1980-1994

Page 7: Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

Pennsylvania Mining slip trip and fall accidents

1989-1999

Bituminous 2028 total 1720 lost time

Anthracite 539 total 451 lost time

Industrial Minerals 133 total 101 lost time

Page 8: Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

Top 10 BituminousSlip, Trip and Fall Accidents

• 960 – Mine Floor• 194 – Ground• 142 – Mining Machines/Mobile Equip• 119 – Wires/Metal covers/Pipes• 101 – Floors (not underground)• 80 - Broken Rock/Coal• 60 - Wood/Concrete Blocks• 58 - Conveyors• 47 - Rails• 46 - Steps

Page 9: Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

Top 10 Anthracite

• 224 – Ground• 65 - Mobile Equip• 57 – Floor (not underground)• 31 - Steps• 21 – Metal Covers/Guards• 17 - Ladders• 17 - Pipes/Wires• 16 – Mine Floor • 15 – Broken Rock• 10 - Scaffolds

Page 10: Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

Top 10 Industrial Minerals

• 34 – Ground• 24 – Floor (not underground)• 22 – Misc.• 13 – Mine Floor• 12 – Metal Covers/Pipe• 10 – Steps• 7 – Broken Rock• 5 – Mobile Equip• 4 – Conveyors• 2 - Ladders

Page 11: Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

Develop a fall prevention plan

1. Address all aspects of hazards

2. Identify all Fall hazards

3. Train employees to recognize Fall hazards

4. Perform a job hazard analysis for each task

5. Provide appropriate equipment

6. Conduct safety inspections at the site

7. Encourage employee participation

Page 12: Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

Types of Falls

Same Level

Elevated

Page 13: Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

Fall Prevention

“The eyes have it”

Look where you’re going

Page 14: Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

Fall Prevention

Traction

Wear the correct shoes for the job.

Provide shoe cleaning devices

Slip resistance walk surfaces

Ice melt or sand

Page 15: Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

Steps and Inclined Walkways

• Substantial hand rails

• Slip resistant treads

• Corrosion

• Lighting

Page 16: Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

Walkways

• Identify

• Keep clear of obstructions

• Clean up spills

• Provide good lighting

Page 17: Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

Equipment

• Ladders

• Handrails

• Steps

• Shoe cleaner

While Climbing on and off

Page 18: Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

Ladders

• Long enough to reach

• Non-conductive side rails

• Stable level surfaces

• 3 Feet above the upper landing

• Height-to-base ratio 4 feet to 1 foot

• Assistance during ascent or decent

• Never lean more than 12 inches beyond side rail

• Carry tools in a tool belt

• Three points of contact

Page 19: Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

Passive Fall Protection

• Guardrails

• Railings

• Safety nets

• Hole Covers

Passive systems protect workers without additional action on their own behalf.

Page 20: Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

Active System

• Full body harness – distributes fall forces to minimize injury.

• Lanyard – shock absorbing.

• Attached to a proper anchorage point – sufficient to withstand 5000 pounds or two times the load expected.

Requires worker to take positive action to prevent falls

Page 21: Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

Human Factors

• Eye sight• Age• Balance• Medications, Alcohol, Drug

effects

Page 22: Pennsylvania Bureau of Deep Mine Safety Slips, Trips and Falls.

Recap

• Make a Plan

• Involve Employees

• Clear Walkways

• Clean up Spills

• Provide Traction

• Passive / Active Fall Protection

• Eliminate the Fall Hazard


Recommended