PRODUCT OVERVIEWLED LIGHT PANEL

Advantage

· Custom size up to 1500mmx3000mm· Customized laser dots design for

different shape/size/light way· High brightness,high evenness· Various LED colour temperatures· Custom colors or RGB/RGBW Changing colour· Single or Double sided· Diffused or Non-diffused surface

PERFECT BACKLIGHTING SOLUTION

Prism Lighting Group's Light Panel, with high brightness, lighting uniformity, is optimal solution to replace traditional LED Strip or LED Module. They are less LED, high efficiency,and super slim, and totally without darkness on the surface. The dots is specially designed for exact requires, no matter how many lux you need, or what you need to demonstrate, they can realize, so in this way, they enhance both brand and products of your customer with an extraordinary visual promotional effect. In addition, with edge-lit technology, it's frame-less, and custom shape as well possible.

High quality LED Strip edge-mount to any shape panels. Input Vol. rated 12vDC/24vDC

After laser dotted, the Mitsubishi Acrylic, say LGP, makes the light uniform. They are able to customised in any shape to anywhere.

Mitsubishi Acrylic, they are stable in both Physical and Chemical, so neither they turn yellow nor fragile.

FRONT VIEW

SPECIFICATIONSELECTRICAL

InputVoltage 12 /24 Volt DC - Constant Voltage

Power Consump 12W/M(3000K,3500K,5300k,6300k)

14.4W/M(4100K)

14.4W/M(Tunable White LEDs)

17.3W/M(RGB LEDs)

Wire Size 22 AWG 2 wire(Standard LEDs)

22 AWG 3 wire(Tunable White LEDs)

22 AWG 4 wire(RGB LEDs)

Wiring Each panel must have direct connection to power supply. Do not wire panels in series.

Wire Length Standard Options 500mm & 1000mm. Custom length options available.

Connector2.1/5.5mm barrel plug

[White Stripe / Center Pin +](Standard White LEDs)

3-pin molex / bare wires[White - Power,

Grey - Warm White,Black - Cool White]

(Tunable White LEDs)

No connector(RGB LEDs）

Customized connection types available

Certificate UL（E476080)

PHYSICAL

Color Temperature

Warm White(WW)

~3000K

Soft White(SW)

~3000K

Neutral White(NW)

~4100K

Pure/Cool White(PW)

~5300K

Ultral White(UW)

~6300K

Tunable White(TW)

3000K - 6500K

Color Adjustable(CA)RGB

Opera -30˚C ~ +40 °C

Environment Dry location only (Standard)

Thickness 4MM (Standard), other thicknesses available depending on the application

Minimum Size 50X50X6MM

Maximum Size 1500X3000X6MM

Tolerance 0-1000mm 1000-2000mm 2000mm+

POWER & CONTROL

Please contact Prism Lighting Group for optimal power & control solutions to fit your requirements

※RGB CONTROLLER,CCT TUNABLE CONTROLLER,LED DIMMER AVAILABLE

01 0

2

03

9 POINTS TESTING

LEDsL

W

Rectangle

Square

LW

LEDs

ILLUMINATED FACE OPTIONS

Both Front and Back Face Illuminated (without white reflector film)

LED LIGHT LOCATIONS

LED LIGHT ALONG 2 EDGES

Non-Illuminated Back Face(white reflector film)

SINGLE FACE ILLUMINATION (STANDARD) DOUBLE FACE ILLUMINATION (OPTION)

LED LIGHT ALONG 1 EDGE

L

Width Less than350mm

LEDs

L

Width over than350mm LEDs

LED LIGHT ALONG ALL 4 EDGES

Width over than 1000mm

Lenght over than 350mm

**Width over than 1000mm，Led light along 4 edges

1000mm

THE STANDARD LOCATION OF WIRE EXIT

STANDARD 1

Wire exit from edge bottom right corner[Available with single color whites, RGB & CCT]

LEDs

LED LIGHT PANEL

STANDARD 2

Wire exit from back of bottom right corner[Available with single color whites, RGB & CCT]

WIRE LOCATION REFERENCE MAP

Long Side

Short Side Front / IlluminatedSide Represented

1

2

3

4

5

6

7

8

LEDs

LED LIGHT PANEL

The wire exit location could be choosed by your installation requirement.

SURFACE MOUTING EXAMPLES

Detailed dimensions from customer required

SCREW MOUNT

*Holes can be drilled at factory according to drawings supplied.

Notes: