PERKINS

BRAILLER

PERKINS BRAILLER

The Parts of the Perkins BraillerHow to Load Paper Into the Perkins Brailler

Using the Perkins Brailler

Inserting Paper

Turn paper feed knobs all the way from you until they will not turn any more.

Pull paper release lever toward you.

• Slide paper horizontally over the top of the paper support bar and stripper plate, and under embossing head and grooved roller.

• Be sure left edge of paper goes under paper guide roller.

• Push paper release lever away from you to clamp paper into place.

• Roll paper feed knobs toward you until all paper is inside Perkins Brailler and knobs will no longer turn.

• Press line spacer key once to set paper in place.

The Perkins Brailler is now ready.

• Braille letters are made by pressing the appropriate keys for each letter.

• Example: The letter ‘d’ is made of the dots 1, 4 & 5 so all three of those keys need to be pressed simultaneously.