INSTALLATION INSTRUCTIONSThe Perma Bright laser comes with an optional power supply, which allows you to plug the light directly into a GFCI outlet. You also may use the landscape lighting system cable to wire your Perma Bright laser into a landscape lighting system. Please choose the set of instructions below that applies to your application.
OPTION 1: INSTALL USING INCLUDED POWER SUPPLY1. Attach the stake to the Perma Bright fixture
head by twisting the stake clockwise.2. Connect the Perma Bright fixture to the
provided 10’ extension cord, then connect the 10’ extension cord to the provided power supply.
3. Connect the power supply to an available GFCI electrical outlet.
4. Place the light into the desired location.5. Loosen the thumb screw on the side of the
fixture and adjust the angle of the projected light. Retighten thumb screw.
6. Use the included remote control to change the settings of the light output.
7. To turn off the light, use the provided remote control or remove the power plug from the GFCI electrical outlet.
OPTION 2: INSTALL AS PART OF A 12V LANDSCAPE LIGHTING SYSTEMImportant: Turn off power before installing light.1. Attach the stake to the Perma Bright fixture
head by twisting the stake clockwise.2. Connect the Perma Bright fixture to the
provided landscape lighting cable.3. Place the light into the desired location.4. Using the landscape lighting cable on fixture,
splice into previously installed (or new) landscape lighting wire (using instructions 5-9 below).
5. Strip #22-#16 wires 1/2” (12.7mm) and #14-#8 wires 7/16” (11.11mm).
6. Align any frayed strands or conductors.7. Pre-twisting is unnecessary. Position stripped
wires together with ends of insulation even. 8. Twist the included DryConn Waterproof
Connectors onto wires, pushing firmly until hand tight. Do not over torque.
9. Wipe sealant in and around conductors and connector opening while tightening.
10.Loosen the thumb screw on the side of the fixture and adjust the angle of the projected light. Retighten thumb screw.
11.Use the included remote control to change the settings of the light output.
PRODUCT SPECIFICATIONS & MEASUREMENTSDimensions: 13”H x 5”L x 4”WHousing: MetalLaser Classification: Class 2MLaser Wavelength: 660 nmPower Supply Input: 110 V AC (with power supply)Light Input: 12VPower Consumption: 4WOperating Temperature: -40°F to 90°FProjection Coverage: Up to 50’ x 50’
PRODUCT SPECIFICATIONS & MEASUREMENTSDimensions: 13”H x 5”L x 4”WHousing: MetalLaser Classification: Class 2MLaser Wavelength: 445 nmPower Supply Input: 110 V AC (with power supply)Light Input: 12VPower Consumption: 4WOperating Temperature: -40°F to 90°FProjection Coverage: Up to 50’ x 50’
PRODUCT SPECIFICATIONS & MEASUREMENTSDimensions: 13”H x 5”L x 4”WHousing: MetalLaser Classification: Class 2MLaser Wavelength: 515 nmPower Supply Input: 110 V AC (with power supply)Light Input: 12VPower Consumption: 4WOperating Temperature: -40°F to 90°FProjection Coverage: Up to 50’ x 50’
Perma Bright LB (Blue)
SKU # Selling Unit
75020 Box of 1
SKU # Selling Unit
75030 Box of 1
Perma Bright LG (Green)
SKU # Selling Unit
75010 Box of 1
Perma Bright LR (Red)
BLINK
FLASH
TWINKLE
FADE
BLINK
FLASH
TWINKLE
FADE
BLINK
FLASH
TWINKLE
FADE
L-Series Low Voltage Outdoor Laser ProjectorPerma Bright™ Laser
50100-98 REV D 11/15
FEATURES AND BENEFITSThe Perma Bright L-Series Laser Light is a unique outdoor light fixture that uses holographic technology to project thousands of pin-points of light, creating a firefly effect. Use as an accent in a 12V landscape lighting system or in a holiday display to create a mesmerizing ambiance! • Cutting edge holographic technology creates superior luminous
light projection for a stunning effect• For outdoor use in low voltage landscape lighting and holiday displays• Available in three colors (Red-LR, Blue-LB, Green-LG) • Metal housing is resistant to harsh outdoor elements• Two installation options: power supply or landscape lighting system cable• Class 2M German/Japanese made laser• 50’ x 50’ projection coverage• Temperature Rating: -40°F to 90°F• 6 hours on and 18 hours off automatic timer built into light fixture• Remote control included (power on/off, flash, blink, fade and twinkle)• Five year limited warranty
L-Series Low Voltage Outdoor Laser Projector
Patent #8,100,537Additional patents pending apply.
Limited Warranty: King Innovation® Perma Bright L-Series and LED Series Lighting Fixtures are guaranteed against faulty materials or workmanship for a period of five years from date of purchase. Any part returned to us within this warranty period showing defects in material or workmanship will be renewed or replaced F.O.B. factory without charge. The liability of the Company is limited to the repair or replacement of the defective parts. In no case will the Company be liable for damage or loss incurred because of interruption of service or for consequential damages, labor, or expense required to repair or replace defective units. This warranty, which is given expressly and in lieu of all other warranties, expressed or implied, or merchantability and fitness for particular purpose, constitutes the only warranty made by the Company.
MADE IN USA OF US AND FOREIGN PARTS
L-SERIES PARTS LIST:1) 1 x Perma Bright Laser Fixture2) 1 x Remote Control (CR2025 3 V Lithium Cell Battery Included)3) 1 x Power Supply4) 1 x Ground Stake5) 1 x Landscape Lighting System Cable; Two (2) DryConn Waterproof Connectors6) 1 x Extension Cord
3 45
2
BLINKFLASH TWINKLEFADE
6
1