Permitted F-111 Venting
These venting templates are for the 2018 thru 2020 Polaris 600R vehicles only. No deviation from these template locations/hole size is allowed. To download the
venting templates visit the Polaris Snowmobile Racing website at
https://snowmobiles.polaris.com/en-us/team-polaris/racer-resources/
This is allowed in all F-111 classes
Small holes are to be drilled to 5/8” Large holes are to be drilled to 1”
Small holes are to be drilled to 5/8” Large holes are to be drilled to 1”
Holes drilled from templates (use a step bit to drill holes)
Holes drilled from templates (use a step bit to drill holes)
It is recommended to install Frogzskin screen (#10032) over the vents in front of the primary clutch.
LEFT
/8” holes
/8” holes
RIGHT