Sex Male| Date of birth 07/04/1965 | Nationality Spanish
PROFESSIONAL CERTIFICATION
WORK EXPERIENCE
JOB APPLIED FOR Structural engineer
2018 Chartered EngineerCertified as a Professional Engineer by The Royal Netherlands Society of Engineers
Registration number: 65/2018
2017 Professional Engineer - ExpertCertified as a Senior-Fellow Professional Engineer by the Agency for Qualification of Professional Engineers. Level 8. Area: Buildings. SubArea: Structures
Registration number: 1108
2005 - 2018 Industrial EngineerJOSEPCOTS SLP (Engineering consultancy bureau specialised in structures)
Structural engineer. This has been a period of consolidation of knowledge and experience, encompassing new materials and structural systems.
Structural engineer. During this period, I deepened my knowledge of strength of materials, theory of structures, rules and peculiarities of structural systems and materials.
Giving support for the development of urbanization and construction projects. During this period, I made a practical application of the general knowledge acquired during my engineer instruction stage and I turned towards the field of designing and calculation of structures.
2009 Design and Construction of Prestressed Concrete Structures 16 credits ECTS
Polytechnic University of Madrid
The course provides the knowledge to safely project all kinds of prestressed concrete structures, especially beams "in situ" and precast of all types, such as, beams, flagstone floors and foundation slabs.
1992 University degree: Industrial Engineering EQF - 7
School of Industrial and Aeronautic Engineering of Terrassa - Polytechnic University of Catalonia
This degree qualifies the professional in the use of knowledge and methods of mathematical, physical, social, management techniques etc. in a wide and generic way to determine, design, specify, analyse, implement and continuously improve the systems.
JOB TRAINING
March 2013 Simulation of calculation models by the finite element method Fointec
Throughout the course, procedures for modelling and meshing solids and surfaces were discussed., besides, the boundary conditions and loads were set
February - March 2009 Practical enforcement of the EHE 08Structural Consultants Association
The course included regulatory changes due to the publication of the new code of structural concrete.
February 2007 Implementation of the edification technical code in structures Structural Consultants Association
The course included regulatory changes due to the publication of the Technical Building Code which involved the repeal of the Basic Standard used until today.
May 2004 Advanced criteria of design, calculation and optimization of building structures with cype softwareTechnological Institute of Lleida and ZIGURAT
This course was oriented to advanced users of the software CYPE in order to reinforce their knowledge.
October 2003 Design, calculation and execution of industrial buildings Technological Institute of Lleida
This course showed the constructive criteria to be considered when designing of a warehouse.
February 2002 Prestressed concrete applicationsCatalan Institute of Technology
This course showed and gave the bases to analyse the most widespread prestressed concrete elements and structural systems.
November 2001 Design and construction of wood structuresTechnological Institute of Lleida
This course provided the bases of design, calculation and implementation procedures for wooden structures.
February 2001 EHE - Structural concrete new standardTechnological Institute of Lleida
This course analysed the new code of structural concrete (EHE) that merged and supersedes the EH91 (reinforced concrete) and the EP93 (prestressed concrete).
March 2000 Design and analysis of results of one-way slabsCYPE Engineers
This course examined the one-way slab structural system and its verification by using a calculation program.
June 1999 Calculation of steel structuresCatalan Institute of Technology
This course gave the theoretical basis for the design and calculation of steel structures.
May 1999 Shallow foundations and retaining wallsCatalan Institute of Technology
This course provided the criteria for the design and calculation of shallow foundations and retaining walls of reinforced concrete.
June 1999 Conference: EHE structural concrete standard – 8 h
Industrial Engineers Association
In this conference, a shallow sight of the new standard was given.
Febrero 1999 Calculation of reinforced concrete structures Catalan Institute of Technology
This course gave the bases of calculation in accordance with the empirical formulation which is gathered in structural concrete code.
Final Degree Project Study and modelling of a deflagration in the interior of a silo cell and its Impact on the surrounding structure which has been protected by the technique of venting.
Publications New standard EFHE Journal of the Technical Architects College of Lleida. (March 2003)
Conferences ▪ The new standard EFHE. Headquarters of Technical Architects of Lleida, on January 14, 2003 ▪ Materials Separator for the sugar industrial process Presentation at the IX National Congress of
Project Engineering (Valencia - July 1993)
Seminars
▪ Substitute teacher of the subject: METALLIC STRUCTURES. School of Agronomists of Lleida (2nd Semester. Course 2002-2003) ▪ Course INTRODUCTION TO CALCULATION OF WOOD. Forest Technology Centre of
Catalonia (febrer 2004) ▪ Substitute teacher of the course: AGRICULTURAL BUILDINGS. School of Agronomists of Lleida
(1st Semester. Course 2007-2008)
Mother tongue(s) Catalan
Other language(s) UNDERSTANDING SPEAKING WRITING
Listening Reading Spoken interaction Spoken production
English C1 C1 C1 C1 C1 Cambridge English: First (FCE) – B2
Spanish C2 C2 C2 C2 C2
Levels: A1/2: Basic user - B1/2: Independent user - C1/2 Proficient user Common European Framework of Reference for Languages
Job-related skills ▪ Ability to integrate in technical teams for developing complex products.
Computer skills ▪ Computer software developed on my own for the calculation of reinforced and prestressed concrete.
▪ Advanced user of the structures calculation program: CYPECAD
▪ Advanced user of CAD programs: Allplan and Solidworks
▪ Advanced user of office software: Word, Excel and OneNote ▪ Advanced user of computer graphics software: Photoshop, Adobe Illustrator and Cinema4D
Other skills ▪ Photography: In addition to the regular use of the mobile phone camera, I have SLR camera to take portraits and landscapes, in RAW format and post editing in Photoshop. ▪ Underwater activities with certified training and experience to cover the depth of 30 meters.
FDP Director Director of the Final Degree Project of the Mechanical Engineering student, Marcel Francés. STUDY OF THE DEGREE OF QUALITY IN THE CONSTRUCTION OF REINFORCED CONCRETE PORTAL FRAMES.
Memberships Professional partner at the Structure Consultants Association. Num. 91
Patents Materials separator in the process of obtaining sugar from beets. Request Number: 9200657
Job Description Design of the joints and bars of a rigid portal frame. The structural system is based on a sheet steel profile whose conformation is oriented to facilitate the assembly of the canvas.
Project Development of the OSP systemClient Vall Estructures
Replace with list of documents annexed to your CV. Examples: ▪ copies of degrees and qualifications; ▪ testimonial of employment or work placement; ▪ publications or research.
