PERSONAL PROTECTIVE EQUIPMENT SPECIFICATION Rev...c) DSP 34: Safety Shoes Electrical Testing...

PERSONAL PROTECTIVE EQUIPMENT

SPECIFICATION

TABLE OF CONTENTS

INTRODUCTION ....................................................................................................................................8

1. SCOPE .............................................................................................................................................8

2. NORMATIVE REFERENCES ...........................................................................................................8

3. DEFINITIONS AND ABBREVIATIONS ............................................................................................9

4. REQUIREMENTS FOR ARC RATED PPE .......................................................................................9

4.1 Overalls ........................................................................................................................................................... 9

4.1 Winter jacket ................................................................................................................................................. 12

4.2 Arc flash suit .................................................................................................................................................. 14

4.3 LV Operating gloves ..................................................................................................................................... 15

4.4 LV Switching Face Shield ............................................................................................................................ 16

4.5 Fall protection Harness ................................................................................................................................ 16

5 ALCALI/BATTERY PPE ................................................................................................................. 17

5.1 Face protection ............................................................................................................................................. 17

5.2 Apron ............................................................................................................................................................. 17

5.3 Gloves............................................................................................................................................................ 17

6 FOOT PROTECTION ..................................................................................................................... 18

6.1 Safety boots/shoes ....................................................................................................................................... 18

6.2 Gumboots ...................................................................................................................................................... 18

6.3 Socks ............................................................................................................................................................. 18

7 HEARING PROTECTION ............................................................................................................... 19

8 BODY PROTECTION ..................................................................................................................... 20

8.1 Rainwear ........................................................................................................................................ 20

8.2 Dust coat for general purposes ................................................................................................... 20

8.3 Dust coat for Wellness employees .............................................................................................. 21

8.4 Underwear (Bra and Pants) .......................................................................................................... 21

8.5 Reflective Vests/bibs .................................................................................................................... 21

9 HAND PROTECTION ..................................................................................................................... 22

City Power Johannesburg

40 Heronmere Road Reuven Johannesburg

PO Box 38766 Booysens 2016

www.citypower.co.za

Tel +27(0) 11 490 7000 Fax +27(0) 11 490 7590

PERSONAL PROTECTIVE EQUIPMENT (CLOTHING)

SPECIFICATION

Document no. Compiled by: Date: Version: Revision Issue Page no.

CP_TSSPEC_218 Mokgadi Magemba August 2014 0 0 1 Page 2 of 145

9.1 Working gloves ............................................................................................................................. 22

9.2 Gloves for cleaning ....................................................................................................................... 22

9.3 Gloves general purpose full grain hide ....................................................................................... 23

9.4 Gloves Split leather ...................................................................................................................... 23

9.5 Gloves leather Green .................................................................................................................... 23

9.6 Gloves latex ................................................................................................................................... 24

9.7 Gloves for wellness use ............................................................................................................... 24

10 FACE PROTECTION ...................................................................................................................... 25

10.1 Face shield for cutting and grinding ................................................................................. 25

10.2 Eye protection for welding purpose .................................................................................. 25

10.3 Eye protection against ultra violet rays (UV) .................................................................... 25

10.4 Eye protection for oil lab use (Goggles) ........................................................................... 26

11 HEAD PROTECTION ..................................................................................................................... 26

11.1 Hard hats for working at ground level ............................................................................... 26

11.2 Hard hats for working from Height .................................................................................... 26

11.3 Soft hats .............................................................................................................................. 27

11.4 Wool winter hats ................................................................................................................. 27

12 RESPIRATORY PROTECTION ...................................................................................................... 27

12.1 Dust Mask ............................................................................................................................ 28

12.2 Clinical use Mask ................................................................................................................ 28

13 SAFETY ACCESSORIES ............................................................................................................... 29

13.1 Danger tapes ....................................................................................................................... 29

13.2 Chevron tape ....................................................................................................................... 29

13.3 Road cone ........................................................................................................................... 29

13.4 Barriers (Shark nets) .......................................................................................................... 30

13.5 Work in progress sign ........................................................................................................ 30

13.6 UV PROTECTION ................................................................................................................ 30

13.7 Dust coat (LAB) ................................................................................................................... 31

Annex B - Revision information ......................................................................................................... 33

Annex C - Technical Schedules A and B for Arc Rated Flame Resistant Overalls ........................ 34

Annex C – Deviation Schedule for Arc Rated Flame Resistant Overalls ........................................ 35

Annexure C - Technical schedules A and B for winter jacket ......................................................... 36

Technical schedules A and B ............................................................................................................ 37

Deviation schedule for winter jacket ................................................................................................. 37

Annexure C - Technical schedules A and B for ARC flash suit ....................................................... 38


Deviation schedule for ARC flash suit .............................................................................................. 39

Annexure C - Technical schedules A and B for LV operating gloves ............................................. 40


Deviation schedule for LV operating gloves ..................................................................................... 41

Annexure C - Technical schedules A and B for LV switching face-shield ...................................... 42


SPECIFICATION




Deviation schedule for LV switching face-shield ............................................................................. 43

Annexure C - Technical schedules A and B for fall protection harness ......................................... 44


Deviation schedule for fall protection harness ................................................................................ 45

Annexure C - Technical schedules A and B for ALCALI face-shield protection ............................ 46


Deviation schedule for ALCALI face-shield protection .................................................................... 47

Annexure C - Technical schedules A and B for Dust coat LAB ...................................................... 48

Deviation schedule for Dust coat LAB .............................................................................................. 49

Annexure C - Technical schedules A and B for ALCALI Apron ...................................................... 50


Deviation schedule for ALCALI Apron .............................................................................................. 51

Annexure C - Technical schedules A and B for ALCALI protection Gloves ................................... 52


Deviation schedule for ALCALI protection Gloves .......................................................................... 53

Annexure C - Technical schedules A and B for Safety Shoes ......................................................... 54


Deviation schedule for Safety Shoes ................................................................................................ 55

Annexure C - Technical schedules A and B for Safety Boots ......................................................... 56


Deviation schedule for Safety Boots ................................................................................................. 57

Annexure C - Technical schedules A and B for Gumboot ............................................................... 58


Deviation schedule for Gumboot ....................................................................................................... 59

Annexure C - Technical schedules A and B for Socks .................................................................... 60


Deviation schedule for Socks ............................................................................................................ 61

Annexure C - Technical schedules A and B for Ear Muffs ............................................................... 62


Deviation schedule for Ear Muffs ...................................................................................................... 63

Annexure C - Technical schedules A and B for Ear Plugs .............................................................. 64


Deviation schedule for Ear Plugs ...................................................................................................... 65

Annexure C - Technical schedules A and B for Rainwear ............................................................... 66


Deviation schedule for Rainwear ....................................................................................................... 67

Annexure C - Technical schedules A and B for Dust coat for Wellness ......................................... 68


Deviation schedule for Dust coat for Wellness ................................................................................ 69

Annexure C - Technical schedules A and B for Dust coat for General purpose ............................ 70


SPECIFICATION




Deviation schedule for Dust coat for General Purpose ................................................................... 71

Annexure C - Technical schedules A and B for underpants............................................................ 72


Deviation schedule for Underpants ................................................................................................... 73

Annexure C - Technical schedules A and B for Bra ......................................................................... 74


Deviation schedule for Bra ................................................................................................................ 75

Annexure C - Technical schedules A and B for Reflective Vest ...................................................... 76


Deviation schedule for reflective vests ............................................................................................. 77

Annexure C - Technical schedules A and B for Gloves for Cleaning ............................................. 78


Deviation schedule for Gloves for cleaning ...................................................................................... 79

Annexure C - Technical schedules A and B for Gloves full grain hide ........................................... 80


Deviation schedule for Gloves full grain hide .................................................................................. 81

Annexure C - Technical schedules A and B for Gloves split leather .............................................. 82


Deviation schedule for Gloves split leather ...................................................................................... 83

Annexure C - Technical schedules A and B for Gloves leather green ............................................ 84


Deviation schedule for Gloves leather green ................................................................................... 85

Annexure C - Technical schedules A and B for Gloves pig skin ..................................................... 86


Deviation schedule for Gloves pig skin ............................................................................................ 87

Annexure C - Technical schedules A and B for Gloves for Wellness Use ...................................... 88


Deviation schedule for Gloves for Wellness use.............................................................................. 89

Annexure C - Technical schedules A and B for Face-shield for General purpose ......................... 90


Deviation schedule for Face-shield for General purpose ................................................................ 91

Annexure C - Technical schedules A and B for Face-shield for Welding purpose ........................ 92


Deviation schedule for Face-shield for welding purpose ................................................................ 93

Annexure C - Technical schedules A and B for Goggles for oil Lab use........................................ 94


Deviation schedule for Goggles for oil Lab use ............................................................................... 95

Annexure C - Technical schedules A and B for UV Protection Sunglasses ................................... 95


Deviation schedule for UV Protection Sunglasses .......................................................................... 97


SPECIFICATION



Annexure C - Technical schedules A and B for Ground Level Hard Hats ...................................... 98


Deviation schedule for Ground Level Hard Hats .............................................................................. 99

Annexure C - Technical schedules A and B for Above Ground Level Hard Hats ......................... 100

Technical schedules A and B .......................................................................................................... 101

Deviation schedule for Above Ground Level Hard Hats ................................................................ 101

Annexure C - Technical schedules A and B for Soft Hats ............................................................. 102


Deviation schedule for Soft Hats ..................................................................................................... 103

Annexure C - Technical schedules A and B for Winter Wool Hats................................................ 104


Deviation schedule for Winter Wool Hats ....................................................................................... 105

Annexure C - Technical schedules A and B for Respirators for oil lab gases protection ........... 106


Deviation schedule for respirators for oil lab gases protection .................................................... 107

Annexure C - Technical schedules A and B for Respirators for chemical protection ................. 108


Deviation schedule for respirators for chemical protection .......................................................... 109

Annexure C - Technical schedules A and B for Respirators single cartridge for oil lab gases

protection .......................................................................................................................................... 110


Deviation schedule for Respirators single cartridge for oil lab gases protection ....................... 111

Annexure C - Technical schedules A and B for Respirators double cartridges for chemical

protection .......................................................................................................................................... 112


Deviation schedule for respirators double catridgefor chemical protection ................................ 113

Annexure C - Technical schedules A and B for Dust Mask ........................................................... 114


Deviation schedule for Dust Mask ................................................................................................... 115

Annexure C - Technical schedules A and B for Clinical Use Mask ............................................... 116


Deviation schedule for Clinical Use Mask....................................................................................... 117

Annexure C - Technical schedules A and B for Danger Tapes ..................................................... 118


Deviation schedule for Danger Tapes ............................................................................................. 119

Annexure C - Technical schedules A and B for Chevron Tapes ................................................... 120


Deviation schedule for Chevron Tapes ........................................................................................... 121

Annexure C - Technical schedules A and B for Road Cones ........................................................ 122


Deviation schedule for Road Cones ................................................................................................ 123


SPECIFICATION



Annexure C - Technical schedules A and B for Barrier (Shark Nets) ........................................... 124


Deviation schedule for Barrier (Shark Net) ..................................................................................... 125

Annexure C - Technical schedules A and B for work in progress signs ...................................... 126


Deviation schedule for Work in progress signs ............................................................................. 127

Annexure C - Technical schedules A and B for Sunscreen ........................................................... 128


Deviation schedule for Sunscreen .................................................................................................. 129

Annexure D – Stock Items ................................................................................................................ 130


SPECIFICATION



FOREWORD

Recommendations for corrections, additions or deletions should be addressed to the:

General Manager - Technology Services

City Power Johannesburg (SOC) Ltd

P O Box 38766

Booysens

2016


SPECIFICATION



INTRODUCTION

City Power personnel routinely carry out work in close proximity to electrical equipment. Whilst every

possible safety precaution is followed, the employer is obliged to provide protective clothing which will

give personnel the maximum possible degree of safety whilst, simultaneously, being comfortable

enough not to restrict movement or cause discomfort.

1. SCOPE

This specification covers City Power’s requirements for protective clothing in accordance with the

requirements of Occupational Health and Safety Act, General Safety Regulations, point 2 –

Personal Safety Equipment and Facilities.

2. NORMATIVE REFERENCES

The following documents contain provisions that, through reference in the text, constitute

requirements of this specification. At the time of publication, the editions indicated were valid. All

standards and specifications are subject to revision, and parties to agreements based on this

specification are encouraged to investigate the possibility of applying the most recent editions of the

documents listed below;

a) SANS 724 – Personal protective equipment and protective clothing against the thermal hazards of an electric arc flash.

b) SANS 492: Protective and Safety Gum boots (Part 4), All made from Rubber

c) DSP 34: Safety Shoes Electrical Testing Specification.

d) SANS 741: Industrial boots (including Safety Boots) with Direct-vulcanized Soles and Heels

e) SANS 1114: Industrial Boots (including Safety Boots) with Stuck-on Pre-moulded or Direct-injection -Moulded Soles and Heels

f) SANS 1167: Industrial Shoes (including safety shoes) with Stuck-on Pre-moulded or Direct-injection - Moulded Soles and Heels

g) SANS 1168: Industrial Shoes (including Safety Shoes) with Direct Vulcanised Soles and Heels

h) SANS 1320: PVC Gumboots: Part 1, Injection-moulded Gumboots

i) SANS 1320: PVC Gumboots: Part 2, Dip Moulded Gumboots with Pre-moulded Stuck-on Outer soles and heels

j) SANS 1320: PVC Gumboots: Part 3, Injection-moulded Ankle Boots for Men

k) SANS 1437: Footwear Soling Material and Footwear Sole and Heel Components of Rubber and

Plastics

l) SANS CKS 61: Men’s Service Type Shoes (Goodyear Welded with Stuck on and Stitched soles)

m) SANS 1404: 2009 Eye-protectors for Industrial and Non-industrial Use

n) SANS 1400: Equipment (including oculars) for eye, face and neck protection against non-ionising radiation arising during welding and similar operations.


SPECIFICATION



3. DEFINITIONS AND ABBREVIATIONS

HRC - Hazard Risk Category.

4. REQUIREMENTS FOR ARC RATED PPE

4.1 Overalls

4.1.1 General requirements

a) The garments shall be rated HRC 2 as per SANS 724

b) The garments shall comply with SANS 724 requirements.

c) Size designations shall comply with SANS 434 requirements.

d) The garments shall consist of two pieces; a trousers and a jacket combination.

e) The arc withstand performance of the fabric shall originate from the inherent characteristics of

the fabric prior to any treatment.

f) Garments shall be suitable for use by both male and female employees.

g) Garment shall be navy blue in colour with City Power branding on upper left pocket of the

jacket and the rear trousers pocket.

4.1.2 Tests

4.1.2.1 Routine test

Visually examine the complete garment for compliance with this specification.

4.1.2.2 Type tests and technical documents

a) All type tests as required by ASTM F1506 or IEC 61482-2

b) Provision of arc test results (e.g. ASTM F1959, IEC 61482-1/2 or ASTM F2621) for the

jacket and trouser as complete garments.

c) All type tests shall be conducted by an independent accredited test laboratory and these

must be signed.

d) City Power reserves the right to verify the authenticity of type test reports submitted and

also to carry out any further type testing of materials.

e) Detailed material technical data sheet from the original material manufacturer to be

submitted with any tender submissions.


SPECIFICATION


CP_TSSPEC_218 Mokgadi Magemba August 2014 0 0 1 Page 10 of

145

4.1.3 Design and cut a) City Power reserves the right to make minor changes to the design in order to accommodate

aesthetic requirements. b) Jacket and trousers shall conform to the general design shown in figures 1 and 2

Figure 1: Jacket design, SANS 434, Style C, Slide fastener with butted fronts, breast pocket with

flap, two side pockets

Figure 2: Trousers design, SANS 434, Front and back view

Note: Figure 1 & 2 are taken from SANS 434 document


SPECIFICATION



145

Table 1: Size range for Work Wear Suits - Trousers

The protective clothing shall be sized in accordance with the requirements of SANS 434.

Size range Chest

circumference Back

length Back width

Sleeve Length

Cuff circumference

82 99 71 38 47 27

87 104 72 40 48 27

92 109 73 42 48 28

97 114 74 44 49 28

102 119 74,5 46 49 28

107 124 75 48 50 29

112 129 75,5 50 50 29

117 134 76 52 51 29

122 139 76,5 54 51 30

127 144 77 56 52 30

132 149 77,5 58 52 30

137 154 78 60 53 31

142 159 78,5 62 53 31

147 164 79 64 54 31


SPECIFICATION



145

Table 2: Size range for Work Wear Suits - Jackets

Size designation

Outside leg length

Inside leg length

Waist Seat

circumference Knee

circumference Bottom

circumference

82/72 104 79 85 97 52 44

87/77 106 80 90 102 53 46

92/82 108 81 95 107 54 48

97/87 110 82 100 112 55 50

102/92 110 82 105 117 56 50

107/97 111 82 110 122 57 50

112/102 111 82 115 127 58 50

117/107 111 81 120 132 58,5 51

122/112 111 81 125 137 59 51

127/117 111 80 130 142 59,5 51

132/122 111 80 135 147 60 51

137/127 112 80 140 152 60,5 52

142/132 112 80 145 157 61 52

147/137 113 80 150 162 61,5 52

Table 3: Size range for Work Wear Suits - Trousers

Note 1: Table 2 & 3 taken from SANS 434 document.

Note 2: The supplier is responsible for ensuring that the above sizes are in accordance with the overalls currently in use

at City Power.

4.1 Winter jacket


a) The winter jackets shall be rated a category 2 as per SANS 724 – 2012 standards.

b) The arc withstand performance of the fabric shall originate from the inherent characteristics of

the fabric prior to any treatments.

c) Size designations shall be compliant to SANS 434

d) A sample of the jacket to be supplied shall be provided with the tender document.

e) The colour of the winter jacket must preferably be navy blue.

f) The jackets shall have one chest pocket and four side pockets. The side pocket shall be the

bellows type with a side entry into another separate pocket and shall be 22 cm deep and 21 cm

wide.


SPECIFICATION



145

g) The pockets shall have flaps with cut-off edges that can be fastened by means of non-

conductive press studs.

h) Chest pockets shall be the bellows type – 15 cm deep and 14 cm wide.

i) The jackets shall reach below the buttocks.

j) The jackets shall have non-conductive press-studs down the front on a double panel strip as

well as a non-conductive zip complying with SANS 1822.

k) The sleeve cuffs shall have two non-conductive press-studs at the end of the sleeve so that the

size can be adjusted.

l) The City Power logo shall be embroidered in accordance with City Power’s corporate identity.

m) The stitching shall comply with SANS 10101.

n) The thread used shall comply with SANS 1362.

4.2.2 Test

a) All tests as required by ASTM F1506 or IEC 61482-2.

b) Provision of arc test results (e.g. ASTM F1959, IEC 61482-1/2 or ASTM F2621)

c) ASTM F2621 or IEC 61482-1 (Method B) (state Edition used). Where the requirements of have

been met, but this requirement not met, City Power may at its discretion allow a supplier to

perform this test before finalizing its decision.

4.2.3 Marking, Care labelling and packaging for overalls and winter jacket

Labels shall be permanently secured on the garment, and should withstand a minimum of 130 washes

under standard industrial laundry conditions.

City Power branding shall be displayed on upper left pocket of jacket and the rear trousers pocket

Information shall be in legible and indelible letters of height at least 2mm.

The garment shall be packed in a plastic and adequately labelled showing the size.

The following information shall be included as a minimum on the label secured to the garment:

a) Compliance to SANS 724,

b) Manufacturer’s name or trade mark,

c) Year of manufacture,

d) Size designation,

e) Care labelling instructions with number of washes tick sheet, and

f) ATPV Rating indicated on the trousers and jacket of the garment.


SPECIFICATION



145

4.2 Arc flash suit


a) The arc flash suit shall be rated HRC 4 as per SANS 724.

b) The arc withstand performance of the fabric shall originate from the inherent characteristics of

the fabric prior to any treatment.

c) Garments shall be suitable for use by both male and female employees.

d) Garment shall be navy blue in colour with City Power branding on upper left pocket of the

jacket and the rear trousers pocket

e) Size designations shall be compliant to SANS 434

f) Sample of the suit to be supplied shall be provided with the tender document.

g) The colour of the suit must be navy blue.

4.3.2 Test

a) All tests as required by ASTM F1506 or IEC 61482-2

b) Provision of arc test results (e.g. ASTM F1959, IEC 61482-1/2 or ASTM F2621)

c) ASTM F2621 or IEC 61482-1 (Method B) (state Edition used). Where the requirements of have

been met, but this requirement not met, City Power may at its discretion allow a supplier to

perform this test before finalizing its decision.

4.3.3 Marking, Care labelling and packaging for arc flash suit Labels shall be permanently secured on the garment, and should withstand a minimum of 130 washes

under standard industrial laundry conditions.

City Power branding shall be displayed on upper left pocket of jacket and the rear trousers

pocket

Information shall be in legible and indelible letters of height at least 2mm.

The garment shall be packed in a bag which is adequately labelled showing the size.

The following information shall be included as a minimum on the label secured to the garment:

a) Compliance to SANS 724,

b) Manufacturer’s name or trade mark,

c) Year of manufacture,

d) Size designation,

e) Care labelling instructions with number of washes tick sheet, and

f) ATPV Rating indicated on the trousers and jacket of the garment.


SPECIFICATION



145

4.3 LV Operating gloves

4.4.1 General requirements a) The gloves shall be a set of two, one right and the other left

b) The gloves Shall be made arc rated category 2 as per SANS 724

c) Shall be of a double stitched construction

d) Full instruction on the washing and care label must be attached on the inside

e) The shelf life shall be more than a year

f) The rubber gauntlets shall comply with SABS IEC 60903.

g) The rubber gauntlets shall be Class 0 (1 000 V).

h) The rubber gauntlets shall be category M (increased mechanical resistance).

i) The rubber gauntlets shall be at least 1,0 mm thick and made from latex.

j) The gauntlets shall be supplied in size categories 8, 9, 10 or 11. The quantities and sizes shall

be specified at the time of order.

k) The length of the gauntlets shall be 360 mm.

l) The gauntlets shall have a tensile strength of at least 20 MPa and a puncture resistance of at

least 30 N/mm.

m) Under gloves are required to be supplied. The under gloves shall be made of cotton and shall

be designed to be worn under the rubber gauntlet.

n) Over gloves (or protector gloves) are also required to be supplied. The over gloves shall be

made of silicon grain leather and shall be lightweight and flexible. The over gloves shall be

designed to be worn over the rubber gauntlets to provide mechanical and chemical protection

to the rubber gauntlets

o) In the cases of both the under and over gloves, either a one-size-fits-all or individually-sized

glove solution shall be supplied. Full details shall be provided with the tender.

4.4.2 Test

a) The gauntlets shall have been tested in accordance with the requirements of SANS 60903.

b) In addition to the requirements of SANS 60903, each gauntlet shall be routine tested at a proof

test voltage of 5 kV for one minute.

c) The measured leakage current shall not exceed 14 mA at any time during the proof voltage

test period.

4.4.3 Packaging and labelling

The packaging shall be capable of preserving the glove for its entire shelf life, adequately marked

showing the size and expiring date.


SPECIFICATION



145

4.4 LV Switching Face Shield


a) The face shield and helmet shall fit the existing hard hats and shall comply with Category 2 as

per SANS 724.

b) The face shield shall provide protection against electrical burns and flashes.

c) The face shield shall be made of a transparent material which shall be made of polycarbonate.

d) The face shield shall have anti-fog coating.

e) The face shield shall have a protection bag.

f) The face shield shall be able to mount a standard hard

4.5.2 Test

a) All test shall be done in accordance to ASTM F2178

b) Complete Type test report shall be submitted with the tender.


The face shield shall be packed in a robust plastic adequately labelled.

4.5 Fall protection Harness


a) The full body safety harness shall comply with ASTM F887.

b) The full body safety harnesses, shall be HRC 2 , and as per SANS 724

c) The use of a material which would not ignite during an exposure to arc would be accepted no

nylon material would be accepted

4.6.2 Test

a) All test shall be done in accordance to ASTM F887



The full body safety shall be packed in a suitable bag which will eliminate damage to the all the harness

accessories.


SPECIFICATION



145

5 ALCALI/BATTERY PPE

5.1 Face protection 5.1.1 General requirements

a) The face shield shall provide protection against acid/alkali burn.

b) The shield shall be made of a transparent material and which material shall be made of polycarbonate.

c) The shield shall have an anti-fog coating

5.1.2 Test

a) All test shall be done in accordance to SANS 1404



The face shield shall be packed in a suitable package which will eliminate damage

5.2 Apron 5.3.1 General requirements

a) The apron shall be rubber-coated or heavy duty plastic polyester viscose material.

b) The apron shall be full length and hang to the knees or below the knees.

c) The apron shall be acid resistant

5.3.2 Test

The proof of test for the apron being acid resistant shall be provided.


a) The Apron shall be packed in a suitable packaging. b) City Power branding shall be displayed in front of the Apron

5.3 Gloves 5.4.1 General requirements

The gloves shall be rubber-coated or heavy duty plastic polyester viscose material and comply with SANS 416.

5.4.2 Test

a) All test shall be done in accordance to SANS 416



The gloves shall be packed in a suitable packaging and correctly labeled


SPECIFICATION



145

6 FOOT PROTECTION

6.1 Safety boots/shoes 6.1.1 General requirements

a) The boots/shoes must be black

b) The Material shall be full grain upper leather

c) The design shall be in accordance with SANS 20345 and certified

6.1.2 Test

Safety shoes and safety boots shall be test as per ASTM F2412 and ISO 20344.


a) The safety shoes and boots shall be packed in a box.

b) The box shall be adequately labeled and show the shoe or boot size

6.2 Gumboots 6.2.1 General requirements

a) Gumboots shall be made of solid rubber and shall be black in colour with a protective toe cap.

b) The gumboot shall be a knee length

c) Gumboots shall comply with SANS 20345.

6.2.2 Test

Gumboots shall comply with. ISO 20344


a) The gumboots shall be packed in a box.

b) The box shall be adequately labeled and show the gumboot size

6.3 Socks a) Long and short navy blue socks shall be made from 100% cotton.

b) The socks are available in three different sizes, namely: 4-6, 7-9 and 10-12.


The socks shall be packed in a suitable packaging designating the size.


SPECIFICATION



145

7 HEARING PROTECTION

7.1 Ear-muffs


a) Ear-muffs shall be in accordance to SANS 1451-1

b) Materials of seals or cushions which may come into contact with the skin shall be non-staining,

soft, and pliable and not cause skin irritation or have any adverse effects on health.

7.1.2 Test

Ear-muffs shall be tested in accordance to SANS 1451-1.


The ear-muffs shall be packed in a suitable packaging.

7.2 Ear-plugs


a) Ear-plugs shall be in accordance to SANS 1451-2. All parts of a pair of ear-plugs shall be so

designed and manufactured that they are not likely to cause injury to the wearer when they are

fitted and used in accordance with the manufacturer’s instructions.

b) Material used in parts of the ear-plugs which may come into contact with the skin shall be non-

staining and not cause skin irritation or have any adverse effects on health.

c) Ear-plugs that have been inserted in accordance with the manufacturer’s instructions shall be

capable of being readily and completely removed from the ear canal by the wearer without the

use of a tool.

7.2.2 Test

Ear-muffs shall be tested in accordance to SANS 1451-2.


a) The ear-plugs shall be packed in a suitable packaging.

b) Ear-plugs intended for repeated use shall be supplied in a package in which they can be

hygienically stored when not in use.


SPECIFICATION



145

8 BODY PROTECTION

8.1 Rainwear


a) The rain jacket shall have a nylon zip and a closed fly front secured by press-studs.

b) The zip shall comply with SANS 1822.

c) The hood shall be attached to the rain jacket.

d) The rain jacket shall cover the buttocks.

e) The sleeves shall have a false elastic sleeve at the end (made of a softer material) to prevent

rain entering the sleeve.

f) The pants shall have two side slits and elasticised waist.

g) Rain suits shall be navy blue in colour.

h) The City Power logo shall be silk-screened in accordance with City Power Corporate identity, on

the front and on the back.

i) The size of the City Power logo on the front shall be 65 mm high and on the back the City Power

logo shall be 150 mm high.

j) The fabric for the jacket and pants shall be minimum of 180gsm (gsm grams per square meter)

and the face side 100% polyester, plain weave with 170 threads per square inch and coated with

a water resistant coating. The inside to be laminated with PVC coating. Seams strength to be

50 kPa, (converts to 50kNm²).The lining to be 80% cotton and 20% polyester.

k) The sizes of the rainwear shall be from small to XXX large


The rainwear shall be packed in a suitable packaging designating the size

8.2 Dust coat for general purposes

8.2.1 General requirements a) The dust coat shall be blue in colour b) The dust coat shall be 3/4 c) The size shall be in accordance with SANS 434


The dust coat shall be packed in a suitable packaging.


SPECIFICATION



145

8.3 Dust coat for Wellness employees


a) The garment shall be white in colour

b) The material shall be suitable for the clinical use

c) The garment shall be 3/4

d) City Power logo shall be displayed on the upper pocket of the jacket

e) A provision shall be made for the printing of the name on the upper pocket of the jacket below

the City Power branding.

f) The size shall range from small to XXX large


The coat shall be packed in a suitable packaging designating the size.

8.4 Underwear (Bra and Pants)


a) The underwear shall be 100% cotton

b) The bras shall not have wire support.

c) The sizes shall range from small to XXX large


The underwear shall be packed in a suitable packaging designating the size.

8.5 Reflective Vests/bibs


a) The vests/bibs design shall comply with SANS 50471.

b) The reflective tape (retro reflective material) shall comply with SANS 50471 and shall be a

minimum of 50mm in width.

c) Colour requirements for background and combined performance material shall comply with

SANS 50471.

d) The front shall be closed by a zip fastener which shall comply with SANS 1822 and be of

nonconductive material.

e) The sizes shall be from small to XXX large

f) The colour shall be florescent orange-red silver retro reflective material

g) The City Power corporate branding shall be displayed on the upper left side of the vest.


SPECIFICATION



145

8.2.2 Test

The vest/bib shall be tested in accordance to SANS 50471


The vest/bib shall be packed in a suitable packaging designating the size.

9 HAND PROTECTION

9.1 Working gloves

9.1.1 General requirements a) Shall be designed according to EN 388 level 3 cut resistance

b) shall be a set of two, one right and the other left

c) shall be made from pig skin leather

d) shall be 250mm

e) shall be of a double stitched construction

f) Full instruction on the washing and care label shall be attached on the inside

g) The size shall range from small to XX large

9.1.2 Test

The gloves shall be tested in accordance to EN 388


The working gloves shall be packed in a suitable packaging designating the size.

9.2 Gloves for cleaning


a) Shall be designed according to EN 388

b) shall be a set of two, one right and the other left

c) Shall be suitable to protect against chemicals (cleaning detergents)

d) Shall be either short or long

e) Shall be yellow in colour

f) The size shall range from small to XX large

9.2.2 Test



The cleaning gloves shall be packed in a suitable packaging designating the size.


SPECIFICATION



145

9.3 Gloves general purpose full grain hide



b) Shall be made from full grain hide

c) Shall be a set of two, one right and the other left

d) Shall be 250mm

e) The size shall range from small to XX large

9.3.2 Test



The general purpose gloves shall be packed in a suitable packaging designating the size.

9.4 Gloves Split leather



b) Shall be made from split leather

c) Shall be 400mm

d) Shall be a set of two, one right and the other left

e) The size shall range from small to XX large

9.4.2 Test



The split leather gloves 1 shall be packed in a suitable packaging designating the size.

9.5 Gloves leather Green



b) Shall be made from leather

c) shall be green in colour

d) shall be 250mm

e) Shall be a set of two, one right and the other left

f) The size shall range from small to XX large


SPECIFICATION



145

9.5.2 Test



The leather green glove shall be packed in a suitable packaging designating the size

9.6 Gloves latex


g) Shall be designed according to EN 388

h) Shall be made from latex

i) shall be black in colour

j) shall be 400 mm

k) Shall be a set of two, one right and the other left

l) The size shall range from small to XX large

9.6.2 Test



The latex glove shall be packed in a suitable packaging designating the size

9.7 Gloves for wellness use


a) Shall be made from latex material

b) Shall be suitable for surgical use

c) shall be cream white in colour

d) shall be a one size fit all

9.7.2 Test

The gloves shall be tested and proof to show that they are suitable for surgical use shall be provide


The wellness gloves shall be packed in a box.


SPECIFICATION



145

10 FACE PROTECTION

10.1 Face shield for cutting and grinding


a) Shall comply to SANS 1404

b) Shall provide safety against cutting and grinding materials

c) Shall be made from a polycarbonate material GR1 impact

10.1.2 Test

The face shield shall be tested and proof to show that they are suitable for protection against cutting and grinding materials as per SANS 1404


The face shield shall be packed in a suitable packaging.

10.2 Eye protection for welding purpose



b) Shall have a lens tint welding shade 5.0 lens coating

c) Shall provide protection against impact, non-adherence of molten metal, protection against hot

solids.

d) Shall be provided with brow guards, chin protectors, chin straps and visors

10.2.2 Test

The welders face protection shall be tested and proof to show that they are suitable for protection during welding as per SANS 1404.


The welders face protection shall be packed in a suitable packaging and correctly labeled.

10.3 Eye protection against ultra violet rays (UV)


a) Shall comply with ANSI Z87.1 and CE-EN166

b) Sunglasses shall provide protection against UV rays (100% UV Protection)/sun glare and

comprise safety lenses of 60% to 80% shade.

c) Shall have an anti-scratch, anti-fog and anti-static

d) The colour of the frames for the sunglasses shall be dark white and the City Power logo shall

appear in yellow and blue on both sides of the frame.


SPECIFICATION



145

e) There shall be two types of sunglasses – Type 1 shall be worn alone and Type 2 shall be

worn over prescribed lenses. Refer to SANS 1404.

10.3.2 Test

The sunglasses shall be tested in accordance with ANSI Z87.1 and CE-EN166


The sunglasses shall be packed in a suitable packaging designating the type.

10.4 Eye protection for oil lab use (Goggles)



b) Shall be mist resistant and anti-fog coated to ANSI D3 D4

c) Lens shall be anti-scratch

d) Shall provide protection against gases

10.4.2 Test

The goggles shall be tested and proof to show that they are suitable for protection against gases as per SANS 1404.

11 HEAD PROTECTION

11.1 Hard hats for working at ground level

11.1.1 General requirements a) All hard hats used shall bear the SABS mark and shall comply with SANS 1397.

b) All hard hats shall be purchased with an adjustable chin strap in accordance with SANS 1397.

c) The colour of the hard hats shall be blue in accordance with City Power corporate identity.

d) The colour of City Power logo on the hard hats shall be in accordance with City Power’s corporate identity.

11.1.2 Test

Hard hat shall be tested in accordance to SANS 1397.


The hard hat shall be packed in a suitable packaging.

11.2 Hard hats for working from Height

11.2.1 General requirements a) All hard hats used shall bear the SABS mark and shall comply with SANS 1397.

b) All hard hats shall be purchased with an adjustable chin strap in accordance with SANS 1397.

c) Shall have a shortened sun peak;


SPECIFICATION



145

d) Limited side rims/gutter;

e) Webbing suspension harness;

f) Thick sweat band of +/- 4.5 cm;

g) Adjustable head bands of standard size 53 cm to 63 cm;

11.2.2 Test

Hard hat shall be tested in accordance to SANS 1397.


The hard hat shall be packed in a suitable packaging.

11.3 Soft hats

11.3.1General requirements

a) The material shall be pre-shrunk 100 % woven cotton fabric in accordance with SANS 1387-4.

b) The colours shall be in accordance with City Power navy blue corporate identity.

c) The City Power logo shall be embroidered on the front of the hat in accordance with the City Power Corporate identity.

d) Soft hats shall have a reinforced stiffened broad brim of at least 80 mm.

e) The stitching shall comply with SANS 10101.

f) The thread used shall comply with SANS 1362.


The soft hat shall be packed in a suitable packaging

11.4 Wool winter hats

11.4.1 General requirements a) The material shall be 100 % wool.

b) The colours shall be in accordance with City Power navy blue corporate identity.

c) The City Power shall be embroidered on the front of the hat in accordance with the City Power Corporate identity.

d) The stitching shall comply with SANS 10101.

e) The thread used shall comply with SANS 1362.

f) The size must be suitable and stretch for both man and woman


The soft hat shall be packed in a suitable packaging

12 RESPIRATORY PROTECTION

12.1 Chemical protections 12.1.1General requirements

a) Respirators shall comply to SANS 50136


SPECIFICATION



145

b) Shall be of a single cartridge

c) The Respirator filters shall comply with SANS 50136

12.1.2 Test

The respirator shall be tested in accordance to SANS 50136


The respirators shall be packed in a suitable packaging Respirators against chemical

12.2 Oil lab gases 12.2.1General requirements Lab use

a) Respirators shall comply to SANS 50136

b) The Respirator filters shall comply with SANS 50136

c) Shall be of a double cartridges

12.2.2 Test

The respirator shall be tested in accordance to SANS 50136


The respirators shall be packed in a suitable packaging

12.1 Dust Mask

a) The dust mask shall comply with SANS 50136

b) The mask shall have the firm securing device to the nose

12.1.2 Test

The dust mask shall be tested in accordance to SANS 50136


The dust mask shall be packed in a suitable packaging

12.2 Clinical use Mask


a) The mask shall have the firm securing device to the nose

b) The mask shall be suitable for clinical use

12.3.2 Test


SPECIFICATION



145

Proof of test report shall be provided showing that the mask is suitable for the surgical use.


The clinical use mask shall be packed in a suitable packaging.

13 SAFETY ACCESSORIES

13.1 Danger tapes


a) The danger tape shall comply be made from a reflective polyethylene Film material

b) The danger tape shall be red and white

c) The danger tape shall at least 3mm thick


The danger tapes shall be packed in a suitable packaging

13.2 Chevron tape


a) The chevron tape shall comply be made from a reflective polyethylene Film material

b) The chevron tape shall be yellow and black

c) The chevron tape shall at least 3mm thick


The chevron tapes shall be packed in a suitable packaging

13.3 Road cone


a) The road cone shall comply be made from a Polyethylene material

b) The road cone shall be orange and white

c) The road cone shall be 450mm and 750mm in height


The road cone shall be packed in a suitable packaging


SPECIFICATION



145

13.4 Barriers (Shark nets)


a) The barrier shall comply be made from a durable plastic material

b) The barrier shall be orange

c) The barrier shall at least be more than 1.5m in height


The barrier shall be packed in a suitable packaging

13.5 Work in progress sign

a) The sign shall comply with SANS 1186

b) The shall be from stainless steel materials as per SANS 1186

c) The sign shall be triangular in shape as per the warning sign in SANS 1186 and permanently fixed on a foldable stand

d) The sign shall show the work in progress at 300m, 200m, 100m and work in progress at the point of work

13.5.1 Test

The sign shall be tested in accordance to SANS 1186


The sign shall be packed in a suitable packaging adequately labelled.

13.6 UV PROTECTION

13.5.1 Protective creams 13.5.1 General requirements

a) The specification for sunscreen products shall be in accordance with SANS 1557. This code specifies requirements for sunscreen products suitable for tropical use for the protection of human skin against the adverse effects of solar UV rays.

b) The product shall be free from palpable particles.

c) The product shall not contain any substances prohibited in terms of the current Foodstuff, Cosmetics and Disinfectant Act.

d) The maximum concentration of the UV filters in the sunscreen product shall not exceed that approved by the Department of National Health and Population Development.

e) The sunblock shall have a minimum SPF of 15+.


SPECIFICATION



145

Note: The ordering of all sunscreen products shall be subject to a risk assessment by a SHE Officer in consultation with the Occupational Health Nurse.

13.5.2 Test

The preservation system used in the sunscreen product shall be such that the product passes the preservation effectiveness test referred to in SANS 1557.


The sunscreen shall be packed in a suitable packaging

13.7 Dust coat (LAB)


a) The garment shall be made of acid resistant material.

b) The garment shall be white in colour

c) The garment shall be a knee length

d) City Power logo shall be displayed on the upper pocket of the jacket

e) A provision shall be made for the printing of the name on the left upper pocket of the jacket

f) City Power branding shall be on the right upper pocket of the jacket.

g) The size shall range from small to XXX large

13.7.2 Test

c) All test shall be done in accordance to ISO 6530

d) Complete Type test report shall be submitted with the tender.


The coat shall be packed in a suitable packaging designating the size.


SPECIFICATION



145

Annexure A - Bibliography

Eskom PPE specification


SPECIFICATION



145

Annex B - Revision information

Date Rev. No.

Notes

June 2008 0 First issue

March 2009 1 Addition to normative references

ASTM F1959 – 04 – Standard test method for determining arc thermal performance of textile materials for clothing by electric arc exposure method using instrumented sensor panels 4.1.2 ……..with a basis weight not greater than 270gsm.

Note, below Table 1, added

Note: table 1 taken from NFPA70E, indicates a minimum requirement for the material arc rating– preference will be given to products that exceed these minimum values whilst still complying with the other requirements of this specification

4.2.1.5 ……with the tape made from inherently flame resistant material

Section 5 (TESTS) changed to make submission of test results as per ASTM F1959 – 04 a requirement of the specification.

July 2012 2 New SANS 724 added and required compliance.

SANS 724 – Personal protective equipment and protective clothing against the thermal hazards of an electric arc.

Definition for meta-aramid fibres added.

Technical schedule revised accordingly.

Annex D revised to include all sizes.

Dec 2014 0 Combined all PPE specification into 1


SPECIFICATION



145

Annex C - Technical Schedules A and B for Arc Rated Flame Resistant Overalls Schedule A: Purchaser's specific requirements

Schedule B: Guarantees and technical particulars of equipment offered

Item Description Schedule A Schedule B (*)

1 The garment shall comply with SANS 724 requirements.

Required

2 The garment shall comply with SANS 434 requirements.

Required

3 Garment to consist of two pieces. Required

4 Garment to be navy blue in colour. Required

5

The complete garment shall be suitably rated to be worm in a HRC 2 environment as per SANS 724 after a minimum of 130 washes.

Required

6 Sample to be provided with any tender submission.

Required

7 Garment marking and care labeling compliance Required

8 Design and cut compliance Required

9 Fabric type tested in accordance with ASTM F1959-04 and signed test reports submitted

Required

10

Complete garment type tested in accordance with ASTM F2621 and signed test reports submitted

Required

11

Detailed material technical data sheet from the original material manufacturer to be submitted with any tender submissions.

Required

Tender Number: _________________________________________________________________

Tenderer’s Authorised Signatory: _________________________________ ___________________

Name in block letters Signature

Full name of company: ____________________________________________________________


SPECIFICATION



145

Technical schedules A and B

Annex C – Deviation Schedule for Arc Rated Flame Resistant Overalls

Any deviations offered to this specification shall be listed below with reasons for deviation.

In addition, evidence shall be provided that the proposed deviation will at least be more cost-effective

than that specified by City Power.

Item Sub-clause of

CP_TSSPEC_218 Proposed deviation

Tender Number: _________________________________________________________________



Full name of company: __________________________________________________________


SPECIFICATION



145

Annexure C - Technical schedules A and B for winter jacket

Schedule A: Purchaser's specific requirements


Item Description Schedule A Schedule B

1 Type of winter jacket Type

2 Compliance to SANS/ASTM SANS/ASTM no

3 Documentation supplied Yes/no

Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for winter jacket

Any deviations offered to this specification shall be listed below with reasons for deviation. In

addition, evidence shall be provided that the proposed deviation will at least be more cost-

effective than that specified by City Power.

Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for ARC flash suit




1 3 piece suit Yes/no

2 Compliance to SANS/ASTM

SANS/ASTM

no


Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for ARC flash suit




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for LV operating gloves




1 LV operating gloves comply to

specification Yes/no

2 Compliance to SANS SANS no


Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for LV operating gloves




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for LV switching face-shield




1 LV switching face-shield

comply to specification Yes/no



Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for LV switching face-shield




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for fall protection harness




1 Fall protection harness comply

to specification Yes/no

2 Compliance to SANS/ASTM

SANS/ASTM

no


Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for fall protection harness




Item Sub clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for ALCALI face-shield protection




1

ALCALI face-shield protection comply to specification

Yes /no



Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for ALCALI face-shield protection




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Dust coat LAB




1 Type Dust coat LAB Type

2 Compliance to SANS Yes/No SANS no

3 Documentation supplied Yes/No Yes/no

Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Dust coat LAB


addition, evidence shall be provided that the proposed deviation will at least be more cost-effective than

that specified by City Power.

Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for ALCALI Apron




1 ALCALI Apron comply to




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for ALCALI Apron




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for ALCALI protection Gloves




1 ALCALI protection Gloves




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for ALCALI protection Gloves




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Safety Shoes




1 Workplace safety shoes




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Safety Shoes




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Safety Boots




1 Workplace Safety boots




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Safety Boots




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Gumboot




1 Workplace Gumboot comply to




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Gumboot




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Socks




1 Compliance to Spec Yes/no


Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Socks




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Ear Muffs




1 Ear Muffs comply to




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Ear Muffs




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Ear Plugs




1 Ear Plugs comply to




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Ear Plugs




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Rainwear




1 Rainwear comply to




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Rainwear




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Dust coat for Wellness




1 Dust coat for Wellness comply



Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Dust coat for Wellness




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Dust coat for General purpose




1 Dust coat for general purpose




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Dust coat for General Purpose




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for underpants




1 Underpants comply to



Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Underpants




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Bra




1 Bra Comply to specification Yes/no


Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Bra




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Reflective Vest




1 Reflective vests comply to




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for reflective vests




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Gloves for Cleaning




1

Glove for cleaning comply to

spec

Yes/no



Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Gloves for cleaning




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Gloves full grain hide




1 Gloves comply to specification Type



Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Gloves full grain hide




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Gloves split leather




1 Gloves comply to specification Yes/no



Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Gloves split leather




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Gloves leather green







Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Gloves leather green




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Gloves pig skin







Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Gloves pig skin




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Gloves for Wellness Use




1 Gloves for wellness use comply




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Gloves for Wellness use




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Face-shield for General purpose




1 Face-shield for general

purpose comply to specification Yes/no



Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Face-shield for General purpose




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Face-shield for Welding purpose




1 Face-shield for welding

purpose comply to specification Yes/no



Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Face-shield for welding purpose




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Goggles for oil Lab use




1 Goggles for oil Lab use comply




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Goggles for oil Lab use




Item Sub-clause of


Tender Number: _________________________________________________________________




Annexure C - Technical schedules A and B for UV Protection Sunglasses



SPECIFICATION



145



1 UV protection sunglasses

comply to specification Yes/ no



Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for UV Protection Sunglasses




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Ground Level Hard Hats




1 Ground Level hard hats comply




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Ground Level Hard Hats




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Above Ground Level Hard Hats




1 Above ground Level hard hats




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Above Ground Level Hard Hats




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Soft Hats




1 Soft hats comply to




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Soft Hats




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Winter Wool Hats




1 Winter wool hats comply to




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Winter Wool Hats




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Respirators for oil lab gases protection




1

Oil lab gases protection

respirators comply to

specification

Yes/no



Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for respirators for oil lab gases protection




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Respirators for chemical protection




1

Chemical protection respirators

comply to specification

Yes/no



Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for respirators for chemical protection




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Respirators single cartridge for oil lab gases protection




1

Oil lab gases protection

respirators single cartridge

comply to specification

Yes/no



Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Respirators single cartridge for oil lab gases protection




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Respirators double cartridges for chemical protection




1

Chemical protection respirators

double cartridge comply to

specification

Yes/no



Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for respirators double catridgefor chemical protection




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Dust Mask




1 Dust Mask comply to




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Dust Mask




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Clinical Use Mask




1 Clinical use mask comply to




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Clinical Use Mask




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Danger Tapes




1 Danger tapes comply to




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Danger Tapes




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Chevron Tapes




1 Chevron tapes comply to




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Chevron Tapes




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Road Cones




1 Road cones comply to




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Road Cones




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Barrier (Shark Nets)




1 Barrier (shark nets) comply to




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Barrier (Shark Net)




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for work in progress signs




1 Work in progress signs comply




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Work in progress signs




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure C - Technical schedules A and B for Sunscreen




1 Sunscreen comply to




Tender Number: _________________________________________________________________





SPECIFICATION



145


Deviation schedule for Sunscreen




Item Sub-clause of


Tender Number: _________________________________________________________________





SPECIFICATION



145

Annexure D – Stock Items

Material Group: PROTEC-CL JACKET FLAME RESISTANT

Item Sap No. Sap Material Name Sap Short Specification

1 231 Jacket Arc Rated Flame

Resistant (Size 32/82)

Jacket Arc Rated Flame Resistant category 2 , Size 32/82 and

Compliance with Specification CP_TSSPEC_218







Jacket: Arc Rated Flame Resistant Overall, Size 36/92 and












Jacket Arc Rated Flame Resistant category 2 , Size 42/ and
































Jacket Arc Rated Flame Resistant category 2 , Size 58/147)

and Compliance with Specification CP_TSSPEC_218


SPECIFICATION



145

TROUSERS FLAME RESISTANT

Item SAP No. SAP Material Name SAP Short Specification

1 11380 Trousers Arc Rated Flame

Resistant (Size 32/82) Trouser Arc Rated Flame Resistant category 2 , Size 32/82 and Compliance with Specification CP_TSSPEC_218

2 2002

Trouser Arc Rated Flame

Resistant category 2 (Size

34/87)

Trouser Arc Rated Flame Resistant category 2 Overall, Size 34/87 and Compliance with Specification CP_TSSPEC_218

3 2003



36/92)


4 2004



38/97)


5 2005



40/102)


6 2006



42/107)


7 2007 Trousers : Flame

Resistant (Size 44/112) Arc Rated Flame Resistant Overall, Size 44/112 and Compliance with Specification CP_TSSPEC_218

8 2008



46/117)


9 2009



48/122)


10 2010



50/127)


11 2011



52/132)


12 2012



54/137)


13 2013



56/142)


14 2014 Trouser Arc Rated Flame

Resistant category 2 (Size Trouser Arc Rated Flame Resistant category 2 Overall, Size 58/147 and Compliance with Specification CP_TSSPEC_218


SPECIFICATION



145

58/147)

Material Group: PERSONAL PROTECTIVE EQUIPMENT

Item SAP No SAP Short Description SAP Long Description

1 11396 Arc rated flame resistant winter jackets

(S)

Winter Jacket Arc Rated Flame

Resistant category 2, Size small and

Compliance with Specification

CP_TSSPEC_218


(M)


Resistant category 2, Size medium

and Compliance with Specification

CP_TSSPEC_218


(L)


Resistant category 2, Size large and


CP_TSSPEC_218


(XL)


Resistant category 2, Size Xlarge and


CP_TSSPEC_218


(XXL)


Resistant category 2, Size XXlarge


CP_TSSPEC_218


(XXXL)


Resistant category 2, Size XXXlarge


CP_TSSPEC_218


(XXXXL)


Resistant category 2, Size XXXXlarge


CP_TSSPEC_218


SPECIFICATION



145


1 232 Arc flash flame resistant suit

Arc Rated Flame Resistant sui

category 4, Compliance with

Specification CP_TSSPEC_218

2 2361 Arc rated LV operating gloves

Arc rated LV operating gloves category

2, Compliance with Specification

CP_TSSPEC_218

3 2103 Arc rated LV switching faceshield

Arc rated LV switching faceshield

category 2,and Compliance with


4 3351 Arc rated full body harness

Arc rated full protection harness

category 2,and Compliance with


ALCALI/BATTERY PROTECTION

1 2712 ALCALI/ Battery protection faceshield

ALCALI/Battery protection faceshield


CP_TSSPEC_218

2 3354 ALCALI/ Battery protection apron

ALCALI/Battery protection apron and


CP_TSSPEC_218

3 11397 ALCALI/ Battery protection gloves

ALCALI/Battery protection gloves and


CP_TSSPEC_218


SPECIFICATION



145

PROTECTIVE LAB PPE

1 3352 Lab acid resistant white coat Small

Lab acid resistant white coat size small


CP_TSSPEC_218

2 3353 Lab chemical resistant white coat

medium

Lab acid resistant white coat size

medium Compliance with Specification

CP_TSSPEC_218

3 3355 Lab chemical resistant white coat

large

Lab chemical resistant dust coat size

large Compliance with Specification

CP_TSSPEC_218

4 3356 Lab Chemical resistant white coat X

large

Lab Chemical resistant white coat size

X large Compliance with Specification

CP_TSSPEC_218

5 3357 Lab Chemical resistant white coat XX

large

Lab Chemical resistant white coat size

XX large Compliance with


6 3358 Lab Chemical resistant white coats

XXX large

Lab chemical resistant white coat size

XX large Compliance with


7 3359 Lab respirators protection against oil

chemical

Lab respirators protection against oil

chemical Compliance with


8 3360 Lab respirators catridge protection

against oil chemical

Lab respirators catridges protection

against oil chemical Compliance with


9 3361 Lab goggles protection against oil

chemical

Lab goggles protection against oil

chemical Compliance with



SPECIFICATION



145

Material Group: PERSONAL PROTECTIVE EQUIPMENT


1 1969 Gumboots (size 4) Gumboots Compliance with Specification CP_TSSPEC_218 (size 4)

2 1970 Gumboots(size 5) Gumboots Compliance with Specification CP_TSSPEC_218 (size 5)








10 1950 Shoes safety (size 4) Shoes safety Compliance with Specification CP_TSSPEC_218 (size 4)

11 1951 Shoes safety (size 5) Shoes safety (size 5)







SPECIFICATION



145




20 11371 Boots safety (size 4) Boots safety Compliance with Specification CP_TSSPEC_218 (size 4)








28 1967 Boots safety (size 12 ) Boots safety Compliance with Specification CP_TSSPEC_218 (size 12 )

29 1968 Boots safety (size 13 ) Boots safety Compliance with Specification CP_TSSPEC_218 (size 13 )


SPECIFICATION


CP_SHEQ_032 Joe Ledile Tefu April 2014 1 1 1 Page 137 of

145

Material Group: PERSONAL PROTECTIVE SOCKS

Material Group: PERSONAL EAR PROTECTIVE

PERSONAL RAINWEAR PROTECTIVE JACKET

Item Sap No. Sap Material Name Sap Short Specification

1 11386 Rainwear jacket and a

trouser small

Rainwear jacket and a trouser small, Compliance with



trouser small medium

Rainwear jacket and a trouser medium Compliance with



trouser large

Rainwear jacket and a trouser large Compliance with



trouser X large

Rainwear jacket and a trouser X large Compliance with



trouser XX large

Rainwear jacket and a trouser XX large Compliance with



trouser XXX large

Rainwear jacket and a trouser XXX large Compliance with



1 11394 Socks 100% cotton navy blue size 4-6

Socks 100% cotton navy blue size 4-6 compliance with Specification CP_TSSPEC_218






1 244 Ear muffs Ear muffs Compliance with Specification CP_TSSPEC_218

2 3364 Ear plugs Ear plugs Compliance with Specification CP_TSSPEC_218


SPECIFICATION



145

Material Group: PROTECTION FOR WELLNESS

1 3365 Medical Attendant white coat small

Wellness white coat small, small


CP_TSSPEC_218

2 3366 Medical Attendant white coat Medium

Wellness white coat medium


CP_TSSPEC_218

3 3367 Medical Attendant white coat large Wellness white coat large Compliance

with Specification CP_TSSPEC_218

4 3368 Medical Attendant white coat X large

Wellness white coat X large


CP_TSSPEC_218

5 3369 Medical Attendant white coat XX

large

Wellness white coat XX large


CP_TSSPEC_218

6 3370 Medical Attendant white coat XXX

large

Wellness white coat size XXX large


CP_TSSPEC_218

7 3371 Surgical mask wellness Wellness surgical mask, Compliance


8 1622 Clinical gloves wellness Wellness clinical gloves, Compliance



SPECIFICATION



145

Material Group: PROTECTION FOR HANDS

1 11398 Gloves for cleaning PVC yellow short

Gloves for cleaning PVC, yellow short


CP_TSSPEC_218

2 3411 Gloves for cleaning PVC long

Gloves for cleaning PVC, yellow long


CP_TSSPEC_218

3 11399 Gloves black industrial latex chemical

resistant 400mm

Gloves black industrial latex chemical

resistant 400mm Compliance with


4 11400 Gloves for general purpose full grain

hide 250mm

Gloves for general purpose full grain

hide Compliance with Specification

CP_TSSPEC_218

5 11401 Gloves for split leather 400mm

Gloves for split leather 400mm


CP_TSSPEC_218

6 11417 Gloves for heavy duty 250mm pig

leather

Gloves for heavy duty 250mm pig

leather Compliance with Specification

CP_TSSPEC_218

7 11416 Gloves for heavy duty 250mm green

leather

Gloves for heavy duty 250mm green

leather Compliance with Specification

CP_TSSPEC_218


SPECIFICATION



145

Material Group: PROTECTION FOR THE HEAD

1 241 Hard hat for ground level with chin

strap yellow

Hard hat for ground level with chin

strap yellow Compliance with


2 3372 Hard hat for above ground level with

chin strap navy blue

Hard hat for above ground level with

chin strap navy blue Compliance with


3 11376 Soft hat cotton navy blue Soft hat cotton navy blue Compliance


4 3373 Winter hat wool navy blue Winter hat wool navy blue Compliance


Material Group: PROTECTION FOR THE FACE

1 242 Faceshield for general purpose

Faceshield for general purpose


CP_TSSPEC_218

2 3374 Faceshield for welding purpose

Faceshield for welding purpose


CP_TSSPEC_218

3 2711 Sunglasses UV protection Sunglasses UV protection Compliance


4 Goggles for Lab use Goggles for Lab use Compliance with



SPECIFICATION



145

Material Group: PROTECTION FOR THE RESPIRATORY

1 370 Respirators for chemical purpose

Respirators for chemical purpose


CP_TSSPEC_218

2 3375 Respirators for chemical purpose

double catridges

Respirators for chemical purpose

double catridges Compliance with


2 275 Dust mask for general purpose

Dust mask for general purpose


CP_TSSPEC_218

Material Group: BARRIERS FOR ACCESS CONTROL

1 6024 Danger tapes yellow and black

3mm thick

Danger tapes yellow and black


CP_TSSPEC_218

2 6190

Chevron tapes red and white 3mm

thick

Chevron tapes red and white


CP_TSSPEC_218

3 291 Road cone 750mm height Road cone 750mm height Compliance


4 6616 Road cone 450mm height

Road cone 4500mm height


CP_TSSPEC_218

5 3401 Barrier (Shark nets) heavy duty plastic

orange

Barrier (Shark nets) heavy plastic

orange Compliance with Specification

CP_TSSPEC_218

6 3412 Work in progress ahead informative

sign 300m

Work in progress ahead informative

sign 300m Compliance with



sign 200m Work in progress ahead informative



SPECIFICATION



145



sign 100m

Work in progress ahead informative



9 3415 Work in progress informative sign

Work in progress informative


CP_TSSPEC_218

Material Group: PROTECTION ACCESSORIES

Item SAP No. SAP Short Description SAP Long Description

1 3376 Sunscreen for UV protection Sunscreen for UV protection Compliance with


Material Group: GENERAL PURPOSE COAT

1 11374 General purpose navy blue coat small

General purpose navy blue coat small


CP_TSSPEC_218

2 3377 General purpose navy blue coat

Medium

General purpose navy blue coat


CP_TSSPEC_218

3 3378 General purpose navy blue coat large

General purpose navy blue coat


CP_TSSPEC_218

4 3379 General purpose navy blue coat X

large

General purpose navy blue coat X


CP_TSSPEC_218

5 3380 General purpose navy blue coat XX

large

General purpose navy blue coat XX


CP_TSSPEC_218


SPECIFICATION



145

6 3381 General purpose navy blue coat XXX

large

General purpose navy blue coat XXX


CP_TSSPEC_218

Material Group: REFLECTIVE VEST

1 233 Reflective vest small Reflective vest small Compliance with


2 1978 Reflective vest Medium Reflective vest medium Compliance


3 1979 Reflective vest large Reflective vest large Compliance with


4 1980 Reflective vest X large Reflective vest X large Compliance


5 1981 Reflective vest XX large Reflective vest XX large Compliance


6 1982 Reflective vest XXX large Reflective vest XXX large Compliance


Material Group: UNDERWEAR

1 3388 Under-pants 100% Cotton female

Small

Under-pants 100% Cotton female

Small Compliance with Specification

CP_TSSPEC_218


Medium

Under-pants 100% Cotton female


CP_TSSPEC_218


large

Under-pants 100% Cotton female large


CP_TSSPEC_218

4 3391 Under-pants 100% Cotton female X

large Under-pants 100% Cotton female X



SPECIFICATION



145

CP_TSSPEC_218

5 3392 Under-pants 100% Cotton female XX

large

Under-pants 100% Cotton female XX


CP_TSSPEC_218


XXX large

Under-pants 100% Cotton female XXX


CP_TSSPEC_218

7 3382 Under-pants 100% Cotton Male small

Under-pants 100% Cotton male small


CP_TSSPEC_218

8 3383 Under-pants 100% Cotton Male

medium

Under-pants 100% Cotton male

medium Compliance with


9 3384 Under-pants 100% Cotton Male large

Under-pants 100% Cotton male large


CP_TSSPEC_218

10 3385 Under-pants 100% Cotton Male X

large

Under-pants 100% Cotton male XX


CP_TSSPEC_218

11 3386 Under-pants 100% Cotton Male XX

large

Under-pants 100% Cotton male XX


CP_TSSPEC_218

12 3387 Under-pants 100% Cotton Male XXX

large

Under-pants 100% Cotton male XXX


CP_TSSPEC_218

13 3394 Bra 100% cotton small Bra 100% cotton small Compliance


14 3395 Bra 100% cotton medium Bra 100% cotton medium Compliance


15 3396 Bra 100% cotton large Bra 100% cotton large Compliance



SPECIFICATION



145

16 3398 Bra 100% cotton X large Bra 100% cotton X large Compliance


17 3397 Bra 100% cotton XX large Bra 100% cotton XX large Compliance


18 3399 Bra 100% cotton XXX large

Bra 100% cotton XXX large


CP_TSSPEC_218

Date post:	09-Apr-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

PERSONAL PROTECTIVE EQUIPMENT SPECIFICATION Rev...c) DSP 34: Safety Shoes Electrical Testing...

Documents