3
BIM Studio initiated by Handicaps Welfare Association (HWA) seeks to enable persons with disabilities to acquire employment in architectural draughtsmanship.
Our Partners:Building Construction Authority (BCA), Singapore Institute of Architects (SIA),
Abilities Beyond Limitations and Expectations (ABLE)
For more information, please contact:
The BIM STUDIO C/O Handicaps Welfare Association
1 Jurong West Central 2, Jurong Point, #04-03, Singapore 648886
Tel: 9488 1203 • Email: [email protected]
The architectural draughtsmen are trained in the following software:
a) Intelli-CAD (2-D drawings)
b) AutoCad (2-D drawings)
c) Revit (2 and 3 D drawings)
d) Sketch-up (3-D drawings)
Services provided:
• Prepare submission model and drawings in Revit and Autocad to the relevant competent authorities in Singapore such as the Urban Redevelopment Authority and BCA;
• Prepare 3-D presentation sketches in Sketch-up and Revit from architect’s free hand sketches and Road Line Plan;
• Space planning design in Revit and Autocad
