+ All Categories
Home > Documents > PET Bottles Theory

PET Bottles Theory

Date post: 02-Apr-2018
Category:
Upload: afzan-nur-faiz-jamean
View: 219 times
Download: 0 times
Share this document with a friend
4
PET Bottles What is PET? PET (PolyEthylene Terephthalate) is a strong but lightweight form of clear polyester. It is used to make containers for soft drinks, juices, alcoholic drinks, water, edible oils, household cleaners, and other food and non-food applications. PET Raw material PET Bottle Process Flow The PET resin, in the shape of small cylinders called pellets, is melt and injected into a mould to make a preform. The preform, a sort of test tube shorter than what the bottle will be but with thicker walls, is then blow-moulded. During the blow-moulding phase, high-pressure air is blown into the preform allowing it to take the exact shape of the mould it is set into. The final product is a transparent, strong and lightweight bottle. Ethlene Glycol Paraxylene (Purified teraphtalic acid) Polyethylene Teraphthalate Material Dryer Chiller Injection Machine Preform Air Compressor Blow Molding Machine Completed Bottle
Transcript
Page 1: PET Bottles Theory

7/27/2019 PET Bottles Theory

http://slidepdf.com/reader/full/pet-bottles-theory 1/4

PET Bottles

What is PET?

PET (PolyEthylene Terephthalate) is a strong but lightweight form of clear polyester. It is used to

make containers for soft drinks, juices, alcoholic drinks, water, edible oils, household cleaners, and

other food and non-food applications.

PET Raw material

PET Bottle Process Flow

The PET resin, in the shape of small cylinders called pellets, is melt and injected into a mould to

make a preform. The preform, a sort of test tube shorter than what the bottle will be but with

thicker walls, is then blow-moulded. During the blow-moulding phase, high-pressure air is blown into

the preform allowing it to take the exact shape of the mould it is set into. The final product is a

transparent, strong and lightweight bottle.

Ethlene

Glycol

Paraxylene

(Purified

teraphtalicacid)

Polyethylene

Teraphthalate

Material

Dryer

Chiller

Injection

Machine

Preform

Air

Compressor

Blow

Molding

Machine

Completed

Bottle

Page 2: PET Bottles Theory

7/27/2019 PET Bottles Theory

http://slidepdf.com/reader/full/pet-bottles-theory 2/4

 

Preform

Page 3: PET Bottles Theory

7/27/2019 PET Bottles Theory

http://slidepdf.com/reader/full/pet-bottles-theory 3/4

 

Page 4: PET Bottles Theory

7/27/2019 PET Bottles Theory

http://slidepdf.com/reader/full/pet-bottles-theory 4/4

 


Recommended