PET ENGINEERING COLLEGE, VALLIOOR – 627 117, TAMIL NADU MANDATORY DISCLOSURE FOR THE YEAR 2019 - 20 Mandatory Disclosure updated on 12/04/2019 10.1 AICTE File No: 730-52-315(E)/ET/98 Date and period of Last approval 10/04/2019 10.2 Name of the Institution PET Engineering College Address of the Institution Thiruchendur Road, Vallioor City and Pin code Vallioor-627117 State/UT Tamil Nadu Longitude and Latitude 77.635038 & 8.365901 Phone No with STD Code 04637-220999 Fax no with STD Code 04637-222205 Office Hours at the Institution 9.00 am To 5.00 pm Academic Hour of the Institution 9.15 am To 4.00 pm Email [email protected]Website www.petengg.ac.in Nearest Railway Station (Distance in KM) Vallioor - 3 km Nearest Airport(Distance in KM) Thoothukudi– 95 km 10.3 Type of the Institution Private- Self Financed Category(1) of the Institution Muslim Minority
Transcript
PET ENGINEERING COLLEGE, VALLIOOR – 627 117, TAMIL NADU
MANDATORY DISCLOSURE FOR THE YEAR 2019 - 20
Mandatory Disclosure updated on 12/04/2019
10.1 AICTE File No: 730-52-315(E)/ET/98
Date and period of Last approval 10/04/2019
10.2 Name of the Institution PET Engineering College
As and when required (minimum one meeting per month) Last meeting held on 18/12/2018
10.9 Organizational chart Vide Appendix 1
10.10 Student feedback mechanism on Institutional governance/ faculty performance
Feed back is taken through online from all students for every semester to improve faculty performance.
10.11 Grievance redressal mechanism for faculty, staff and students
`Class committee meetings are conducted once in a month. The faculty advisor /
senior tutors arrange such meetings. An open discussion will be made and the
students air out their difficulties and grievances. This is being brought to the
notice of the college advisory board and redressed after discussion.
Periodical staff meetings are being conducted at the departmental level
to enable faculty members give suggestions for improving the academic
programmes. The respective HODS will present the various points in the college
advisory board meetings. The academic issues will be sorted out and the
administrative problems will be transferred to the management for solution.
Profile of Principal
Dr. N. Mohamed Sheriff
Qualification UG PG Research Degree B.E (Hons.) M.Tech. Ph.D Specialization Mechanical Prod. Engg. Applied Mechanics Institution Thiagarajar College of Engg.,
Madurai Kamaraj University IIT-Madras IIT-Delhi
Total Experience in Years
Teaching Industry Research 20 7 1
Papers Published in Journals
International: 6 National :1
Papers Published in Conferences
International:19 National: 33
Sample details of Journal papers
INTERNATIONAL JOURNAL PUBLICATIONS
1. Analysis of collapse behaviour of combined geometry metallic shells under axial impact International Journal of Impact Engineering , Volume 35, Issue 8, August 2008, Pages 731-741 N .K. Gupta, N. Mohamed Sheriff, R. Velmurugan
2. Experimental and numerical investigations into collapse behaviour of thin spherical shells under drop hammer impact International Journal of Solids and Structures , Volume 44, Issue 10, 15 May 2007, Pages 3136-3155 N .K. Gupta, N. Mohamed Sheriff, R. Velmurugan
3. A study on buckling of thin conical frusta under axial loads Thin-Walled Structures , Volume 44, Issue 9, September 2006, Pages 986-996 N .K. Gupta, N. Mohamed Sheriff, R. Velmurugan
4. Numerical design optimisation of drawbead position and experimental validation of cup drawing process Journal of Materials Processing Technology , Volume 206, Issues 1-3, 12 September 2008, Pages 83-91 N. Mohamed Sheriff , M. Mohamed Ismail
5. Experimental and theoretical studies on buckling of thin spherical shells under axial loads International Journal of Mechanical Sciences , Volume 50, Issue 3, March 2008, Pages 422-432
N .K. Gupta, N. Mohamed Sheriff, R. Velmurugan
6. Optimization of thin conical frusta for impact energy absorption Thin-Walled Structures, Volume 46, Issue 6, June 2008, Pages 653-666
N. Mohamed Sheriff, N.K. Gupta, R. Velmurugan, N. Shanmugapriyan
NATIONAL JOURNAL
1. Experimental and Numerical Investigations on the Forming Characteristics of Thin Steel
Sheet in the Presence of a Rectangular Drawbead
pp 1-8, Volume 89, April 2008 IE(I) Journal–MC
M M Ismail, G Murali, Dr N M Sheriff, Dr A Rajadurai. PhD Guidance Area of specialization Design, analysis of Mechanical systems No. of PhD scholars pursuing
2
No. of ME projects guided
15
Academic contributions Board of studies member in Mechanical Engg-
Anna University Chennai from 2013 ( 2 years) Academic council Member in Anna University of Technology, Tiruchirappalli between 2007 and 2010(3 years) Board of studies member in Mechanical Engg-
Madurai Kamaraj University from 2000-2003 Expert member in software selection panel at DRDL, Hyderabad from 2005-2008. Expert Member in AICTE project review panel -2006-2008 Question paper setter, evaluator in various deemed universities and autonomous institutions
Professional membership ISTE- Life member
IIPE-Life Member
IE(I)-Life Member Consultancy activities Sponsored research projects carried out from DRDL,
Hyderabad, ISROThiruvananthapuram and IGCAR, Kalpakkam Grants fetched 27 lakhs from different Govt. agencies as Principal or Co-Investigator to
carry out research projects; 36 lakhs from DST, New Delhi as Institution coordinator-established Entrepreneurship Development Cell (Rs.6, 40,000), and CFD lab (Rs.5, 00,000), in 2011 with financial aid from AICTE as Institution Head.
Awards Best paper award in 2009 WSEAS International Conferences, Ningbo, China.
Interaction with Professional institutions
Publishing/presenting technical papers, reviewer for technical journals.
10.12 Department Details
1 Name of the department Civil Engineering
Course B.E
Level UG
First Year approval by the council
2012
Year wise sanction intake 2016-17 2015-16 2014-15
Year wise actual admission 60 60 60
Year of Passing 2012 -2016 2013-2017
% of students passed with Distinction
1
% of students passed with First Class
36
Students Placed 40 13
Students placed average pay package RS./ Year
100000
Students opted for higher studies
03
Accreditation status of the course
Yet to Apply
Doctoral Courses No
Foreign Collaboration if any
Professional society membership
Institution of Engineers(India)
Professional Activities
Consultancy Activities
Grants Fetched
Departmental Achievements International Conference on Innovative Trends in Mechanical and Civil Engineering ( ICITMC 2016) 10th June 2016
Distinguished Alumni
ASIF.K ABU ASSOCIATES TRIVANDRUM
PUDUMAI SEELAN PRANEC INFRA .PVT .LTD
MANIARASAN GANESAN BUILDERS LTD
THIRUNAVUKARASU. V IL&FS ENGINEERING & CONSTRUCTION COMPANY
VENGADESH HARI NARAYANA STRUCTURALS PVT . LTD
2 Name of the department Computer Science and Engineering
Course B.E
Level UG
First Year approval by the council
1998
Year wise sanction intake 2016-17 2015-16 2014-15
60 60 120
Year wise actual admission 20 36 29
Year of Passing 2016 2015 2014
% of students passed with Distinction
0 0 0
% of students passed with First Class
34 60 69
Students Placed 57/63(90.47%) 76/98(77.55%) 71/103(68.26%)
Students opted for higher studies
3 15
10
Accreditation status of the course
Yet to Apply
Doctoral Courses No
Foreign Collaboration if any Nil
Professional society membership
CSI and IE(I) Student Chapter
Professional Activities Inauguration of Computer Society Of India & IE(I) Students’ Chapter
Consultancy Activities Nil
Grants Fetched Nil
Departmental Achievements
Faculty development programme on “IBM BLUMIX” conducted by ICTACT. Technical workshop on “WEB DEVELOPMENT” by IFY TECHNOLOGIES. One day technical symposium C-ELECTRA’16 Career connect Training Programme by Breakthrough Services Solutions, Chennai. Webinar on ‘Customer Relationship Management’ by Mr.Sailappa Vignesh,MST Solutions,U.S.A National Conference ICTIEEEC’16
Distinguished Alumni
Peer Mohammed Sahul Hameed Arul Selvan Kalyan Kumar Karthic Walter Sudhar Raja Swena Sharmila Deva Selvi
CTS Rolta India ltd, Mumbai Patni S/w Mumbai HCL TCS Sathyam CTS Wipro Microsoft
3 Name of the department Electrical and Electronics Engineering
Course B.E
Level UG
First Year approval by the council
1999
Year wise sanction intake 2016-17 2015-16 2014-15
60 60 60
Year wise actual admission 22 16
13
Year of Passing 2015-2016
(42/62)=67.7 2014-2015
(47/68)=69.11 2013-2014 (54/75)=72
% of students passed with Distinction
-- --- ----
% of students passed with First Class
29 29 38
Students Placed 29 38 45
Students placed average pay package RS./ Year
Rs 12,000 Rs 10,000 Rs. 10,000
Students opted for higher studies
1 4 6
Accreditation status of the course
Yet to Apply
Doctoral Courses No
Foreign Collaboration if any No
Professional society membership
IEEE IEI REC EMC
Professional Activities Inauguration Function of REC was conducted on 22-08-2016 Intra-College Competitions of REC was conducted on 14-10-2016
Consultancy Activities No
Grants Fetched No
Departmental Achievements
C – Electra ’16 National Level Technical Symposium was conducted on 28-09-2016 Guest Lecture on Career Guidance programme was conducted on 8-07-2016 Guest Lecture for Embedded Systems & Industrial Automation was conducted on 21-07-2016 Guest Lecture on PLC SCADA was conducted on 14.02.2017
Distinguished Alumni
Mr. M.Alagumani Mr. R.Ratheesh Mr.VelMurugan Mr. P.Vembu Mr.Abdul Rasheed Mr.Yasar Arafat Mr.Bijil
Asst Engg Manager L&T Chennai Syntech Switchgear PVT Ltd Singapore ADVANTEST Malaysia EPE Qatar Concorn Electrical Qatar United Telecom Limited Bengaluru INFOSYS Trivandrum
4 Name of the department ECE
Course B.E
Level UG
First Year approval by the council
1998
Year wise sanction intake 2016-17 2015-16 2014-15
120 120 120
Year wise actual admission 81 73 93
Year of Passing 2017 2016 2015
% of students passed with Distinction
2 4 1
% of students passed with First Class
54 54 75
Students Placed 56/92 45/79
39/101
Students placed average pay package RS./ Year
1,07,000 1,40,000 1,17,000
Students opted for higher studies
- 6 12
Accreditation status of the course
Yet to Apply
Doctoral Courses No
Foreign Collaboration if any -
Professional society membership
IETE,IEEE
Professional Activities
Consultancy Activities -
Grants Fetched 1
Departmental Achievements Major functions
Distinguished Alumni
Name of the student Company Name
S. Gnana Salten N. Samsudeen S. Reshma M. Sinshu A. Usha Nandhini N. Mohamed Hisham K. Saravana Vijay S. Haniya Hameed R. Jasphin
HPE SBA Info Solutions SERWELL CTS Infosys N-TCS Indian Bank DEL Tata Communication
5 Name of the department MECHANICAL ENGINEERING
Course B.E
Level UG
First Year approval by the council
1998
Year wise sanction intake 2016-17 2015-16 2014-15
120 120 120
Year wise actual admission 68 86
79
Year of Passing 2015-16 2014-15 2013-14
% of students passed with Distinction
2 3
2
% of students passed with First Class
84 40
45
Students Placed 15 12
14
Students placed average pay package RS./ Year
RS. 10000 RS. 9000 RS. 8000
Students opted for higher studies
4 3
5
Accreditation status of the course
Yet to Apply
Doctoral Courses No
Foreign Collaboration if any No
Professional society membership
SAE STUDENTS CHAPTER AND ENERGY CLUB
Professional Activities CONDUCTED INTERNATIONAL CONFERENCE
Consultancy Activities YES- COMPOSITE FABRICATION AND BIODIESEL PREPARATION FACILITIES AVAILABLE.
Grants Fetched No
Departmental Achievements FDP ON AUTODESK DESIGN SOFTWARE
Distinguished Alumni MR. VELMURUGAN MR. MUTHURAJ MR. MAHENDRA NISANTH
ISRO WHEELS INDIA AMERICAN BANK
6 Name of the department Master of Computer Application
Course MCA
Level PG
First Year approval by the council
2007
Year wise sanction intake 2016-17 2015-16 2014-15
60 60 60
Year wise actual admission 35 44 18
Year of Passing 2016 2015 2014
% of students passed with Distinction
44.4 14.8 14.2
% of students passed with First Class
55.6 85.1
80
Students Placed 2 6 3
Students placed average pay package RS./ Year
150000 200000 180000
Students opted for higher studies
- 1 2
Accreditation status of the course
Yet to Apply
Doctoral Courses No
Foreign Collaboration if any -
Professional society membership
ICST
Professional Activities Conduct State Level Symposium
Consultancy Activities Conduct Seminar in DOT NET
Grants Fetched
Departmental Achievements Got university rank, students won prizes in various college events, produced above 90% result.
Distinguished Alumni List of Alumni with abbreviated company name
7 Name of the department MANAGEMENT STUDIES
Course M.B.A.
Level PG
First Year approval by the council
2006
Year wise sanction intake 2016-17 2015-16 2014-15
60 60 60
Year wise actual admission 51 60 18
Year of Passing 2018 2017 2016
% of students passed with Distinction
- - 1
% of students passed with First Class
- - 7
Students Placed - - 11
Students placed average pay package RS./ Year
- - Rs.1,44,000
Students opted for higher studies
- - -
Accreditation status of the course
Yet to Apply
Doctoral Courses No
Foreign Collaboration if any NIL
Professional society membership
NIL
Professional Activities NIL
Consultancy Activities NIL
Grants Fetched NIL
Departmental Achievements MAN MEET, SALES FAIR, WORKSHOP FOR BUDDING WOMEN ENTREPRENEURS
Distinguished Alumni
C.Sheeba Christilda / Assistant Professor In PET Engineering College, Vallioor X.Cross Benisker / Nanjil Enterprise, Entrepreneur P.Mohammed Yasser / Chief Editor In Eathirkallam Students Paper
10.14 Admission Quota
Under Govt. Quota : 50 % of sanctioned intake in each branch Under management Quota : 50 % of sanctioned intake in each branch
Entrance Test or Admission Criteria
Applications are invited for the unified single window admission for first year B. E. / B. Tech. Degree Programme every year to the University Departments of Anna Universities, Government and Government Aided Engineering Colleges and for the seats surrendered by the Self – Financing Engineering Colleges. The selection of candidates will be on the basis of the marks obtained in the prescribed subjects in the qualifying examination HSC/12th Board. The academic marks in the prescribed subjects will be reduced to 200. (Mathematics 100, Physics + Chemistry =100) which will be considered for Ranking.
As per the Tamil Nadu Government Notification, Management Seats are being filled based on the qualifying examination only. However the entrance test conducted by the Consortium is mandatory for admissions. Minimum level of acceptance. Percentage of minimum marks for eligibility
Community Percentage of Marks OC 45 BC 40
MBC 40
SC/ST 40
Annual Fees in Rs. B.E / B.Tech ME MBA MCA
Govt. Quota Management Quota
50,000 50,000 35,000 35,000
85,000
No of Fee Waivers Offered -- -- -- --
Admission Calendar++
First semester classes normally began after the completion of Tamil Nadu Engineering Admissions (TNEA) unified single window admission for first year B. E. / B. Tech. Degree Programme (Normally during August) and PG classes during September.
PIO Quota Nil
10.15 Infrastructural Information
Classroom / Tutorial Room Facilities
There are well furnished 35 classrooms and 13 Tutorial Rooms for all existing courses.
Laboratory Details There are well equipped laboratory for Existing courses as per AICTE Norms.
Computer Centre Facility
Library Facility
There are enough volume of books, Journals to cater the needs of New courses, Additional intake and Existing courses over and above AICTE norms.
Sports: Athletics 400 meter Track, Cricket and Foot ball field.
Gymnasium Facilities Multi stations multiple gym & Tread Mill
Facility for Disabled Barrier free environment and toilets are available
Additional Facilities
Our college buses are plying to Nagercoil, Tirunelveli, Kayalpatnum, Kalakad, Kudankulam, Ambai (22 Buses + 2 Spare)
Purified Drinking Water are provided to students and staff Xerox Center is situated inside the campus
10.16 Boys Hostel
One Hostel with spacious room, dining halls, stream cooking kitchen. Indoor games and TVs are provided for entertainment. No of Rooms 82
Girls Hostel
One separate Hostel with spacious room, dining halls, stream cooking kitchen. Indoor games and TVs are provided for entertainment.
No of Rooms 40
Medical and other Facilities at Hostels
A Doctor is visiting the hostel daily for the benefit of student’s health. An Ambulance is available at our campus round the clock.
10.17 Academic Session Odd Sem : June - Nov Even Sem- : Dec - Apr
Examination system, Year/sem
End semester Examination conducted by University during Odd and Even semester in December and May respectively. Three Series Test per semester conducted for the Internal Assessment
Period of Declaration of Results
Normally 15 to 20 days from the last examination conducted by the university.
10.18 Counseling and Mentoring
Done by senior faculties from the department as and when required.
Career Counseling Many career guidance programs and placement trainings are arranged for the students which may guide them for their higher studies and job field.
Medical Facilities A Doctor is visiting the college daily for the benefit of student’s health. An Ambulance is available at our campus round the clock.
Students Insurance Group insurance scheme for all students
10.19 Students Activity Body
Cultural Activities In the eve of College Day celebration, many Cultural Events have been arranged and Winners will be awarded and they can exhibit the same on College day function cultural.
Sports Activities
Students are encouraged to utilize the sports facilities and they have participated in many sate /district/national level competitions and won many prizes. Sports day will be conducted every year with house pattern games and sports.
Literary Activities Literary Society will take care of literary activity
Technical Activities of TechFest
Each department has their association. On behalf of this association a technical symposium will be conducted every year which encourage the students to show their talent.
Industrial visit or tour Every year students are allowed to go for an industrial visit for 3-4 days which may help them learn about industry set up, working culture etc.
Alumni Activities
Our alumni activities are regularly going on with various chapters available at Chennai, Dubai, Bangaluru, Cochin etc.
Our College team visited every year to various places where alumni want to organize meet. In Feb 2019, we organized a meet at Dubai on 22/03/2019.
