Internal

This document is property

of the krones Group and contains internal information.

It may only be used for the purpose for which it has been provided.

It must not be copied, or passed on or disclosed to third parties.

Krones PET Asept L2.1Degermination with peracetic acid

Date: 11/15/2013 Created by: Stefan Kraus SFT PM

krones Beispieltext2krones PET Asept L2.1 Internal

Machine Highlights

Degermination

Unique degermination via atomized PAA

Perfectdegermination bydegermination via condensation

Very fast degerminationprocedure

Consumption

Very low steamconsumption

Lowest power consumption byservo drives

Reduced number offilter fan units

Performance

Sterilizerstarwheels insteadof sterilizationcarousel

Single channel rinsernozzle instead ofjetting with sterile water and sterile air

Continousmonitoring of all relevant asepticprocesses

Layout

Slim Down machineconfiguration

Savings in floorspace

Reducedmaintenance costscaused by theelimination of thesterilizator carousel

krones Beispieltext3krones PET Asept L2.1 Internal

Machine Layout

Layout

Linear machine layout

Slim Down compared to the PET Asept L1

No reduction of the asepticperformance

No sterilizer carousel necessary: replaced by sterilizer starwheels. (1)+(2)

12

12

krones Beispieltext4krones PET Asept L2.1 Internal

Performance

Sterilizer: Bottle is treated inside with umbrella nozzle Sterilizer: External treatment in different temperature steps - no use of detergents Rinser: Single channel nozzle - no use of sterile air Filler: Steam sterilizable, product feed from above via slipring distributor CIP Cycle: 2.5h last bottle first bottle Monitoring: All process relevant critical control points for maximum aseptic safety

144 hours continous production time!

Thank you!