Home >Engineering >Petrochemical Infographic

Petrochemical Infographic

Date post:14-Apr-2017
Category:
View:130 times
Download:4 times
Share this document with a friend
Transcript:
  • Inaccurate / Missing Data: Much existing plant documentation is outdated or inaccurate. Traditional measurement methods are inconsistent and manual. Missed measurements result in repeated trips to the eld extending project times.

    Safety / Risk Mitigation: Climbing on equipment in dangerous conditions for extended periods of time places employees at risk

    Capital Project Budgeting: Traditional survey requires more man-power on-site for longer times. During turnaround this results in longer plant shut-down.

    COMMON ISSUES WITH TRADITIONAL SURVEY:

    TYPICAL SCANNING DELIVERABLES

    3D SCANNING BENEFITS

    Contact FARO today for to find out how you and your company can benefit from 3D laser scanning technology.

    800.736.0234 | www.FARO.com

    Reverse engineering

    Rapid prototyping

    Direct sunlight scanning

    Range from 0.6m up to

    330m**FARO Focus3D X 330

    Integrated GPS

    receiver

    FARO Focus3D X 330 Laser Scanner shown

    Tie-in Point Extraction

    Piping Design and Fabrication

    Volumes and Shell Deformation

    Ground/Foundation Analysis

    Quality Control

    Structural Design and Analysis

    Fully Captured Facility: Measureable in 3D generate point clouds

    Non-contact Measurement

    Reduced Downtime

    Shareable Data: Your facility from your web browser

    Tools to streamline design deliverables

    Quality Control Improvement

    2D/3D Design Deliverables

    Civil Survey

    Tank Analysis

    FIELD-TO-FINISH DESIGN PLANNING

    Minutes vs. WeeksCapture full 3D plant data in minutes vs. weeks/months/years with traditional methods

    Review and share data

    Non ContactKeep workers safe. Laser is eye safe. No need to climb on/over equipment.

    Scan the facility with 3D Laser Scanner

    Publish measureable datato the cloud

    Accessible across company network

    Quality ControlUse data to make informed decisions

    Run clash detection between proposed design and existing facility (laser scan)

    Tie in Point Extraction: Ensure new fabrication ts before taking to the eld

    Determine tank volumes and deformation

    2DCreate needed 3D & 2D documentation

    Intelligent piping and structural models for asset

    management

    Isometrics & Orthographics Facility terrain models and foundation integrity

    Clash Detection

    THE FIELD-TO-FINISH TOOLKIT

    CAPTURE

    COMPUTE

    Organize, Measure and Publish Data sets

    TRADITIONAL VS. FARO FIELD-TO-FINISH TOOLKIT

    Model & analyze data, convert to typical Autodesk deliverable

    Tie in Point Extraction

    Tank Analysis

    Measuring a Petrochemical Structure for Structure Analysis

    Total Cost Savings*with FARO Field-to-Finish Toolkit

    Time/Personnel Comparison

    Amount of area measured

    *Total cost Traditional: $17280*Total cost FARO Field-to-Finish: $6660

    Traditional FARO Field Finish80%5%

    Measuring a Commercial Building for Architectural Rennovations

    Total Cost Savings*with FARO Field-to-Finish Toolkit

    Time/Personnel Comparison

    Amount of area measured

    *Total cost Traditional: $9720*Total cost FARO Field-to-Finish: $3915

    Traditional FARO Field Finish90%10%

    Measuring Bridges for Engineering Analysis and Retrot

    Total Cost Savings*with FARO Field-to-Finish Toolkit

    Time/Personnel Comparison

    Amount of area measured

    *Total cost Traditional: $17280*Total cost FARO Field-to-Finish: $9000

    Traditional FARO Field Finish90%10%

    CREATE

    3D SCANNINGSave Money, Save Time, Stay on Schedule!

    Have traditional methods of measuring proven to be inaccurate, time consuming and costly for you and your business? 3D Scanning is not only more accurate than traditional methods, it can save you and your company money, time and rework. Explore this infographic to learn more about why so many industries are using 3D scanning technology vs. traditional methods.

    Measuring Pumpstations for Retrot

    Total Cost Savings*with FARO Field-to-Finish Toolkit

    Time/Personnel Comparison

    Amount of area measured

    *Total cost Traditional: $12960*Total cost FARO Field-to-Finish: $4500

    Traditional FARO Field Finish75%5%

    Measuring Stockpiles for Volume Inventory

    Total Cost Savings*with FARO Field-to-Finish Toolkit

    Time/Personnel Comparison

    Amount of area measured

    *Total cost Traditional: $5850*Total cost FARO Field-to-Finish: $1800

    Traditional FARO Field Finish95%3%

    Capture your scene with FAROs line of 3D laser scanners

Click here to load reader

Reader Image
Embed Size (px)
Recommended