Pettibone has always meant superior performance that is backed by solid construction and smart features. WATM Crane Sales & Services extensive range of Pettibone products means all your needs are covered.
6
Since the 1950’s when Pettibone revolutionised the job site with the world’s first forward - reaching, rough terrain machines, they have continued to provide the global market with superior machines that can takle the toughest conditions. Quality features like precise hydraulic boom placement, strong axle design and maximum visibility around the cab. The Pettibone range of machines have been used for many years throughout Australia, working in the harshest of conditions and have exceeded all expectations. PETTIBONE HAS ALWAYS MEANT SUPERIOR PERFORMANCE THAT IS BACKED BY SOLID CONSTRUCTION AND SMART FEATURES.
Transcript
FRONT COVER HEADBACK COVER HEAD
Since the 1950’s when Pettibone revolutionised the job site with the world’s first forward - reaching, rough terrain machines, they have continued to provide the global market with superior machines that can takle the toughest conditions.
Quality features like precise hydraulic boom placement, strong axle design and maximum visibility around the cab.
The Pettibone range of machines have been used for many years throughout Australia, working in the harshest of conditions and have exceeded all expectations.
AS A WEST AUSTRALIAN, FAMILY OWNED COMPANY WITH A TOTAL COMMITMENT TO CUSTOMER SATISFACTION, WATM CRANE SALES AND SERVICES WA IS THE PREFERRED CHOICE OF WEST AUSTRALIA’S CRANE HIRE, MINING, CONSTRUCTION AND SERVICE INDUSTRIES.
Customer service is paramount at WATM. From sales to service, repairs to maintenance - the company is committed to providing the best, most cost effective solutions for its customers.
WATM has a strong commitment towards quality and thus continually seeks ways of improving and upgrading its facilities to cater for growing demand and technology. Technical staff are constantly trained on new products including onsite training for key personnel in the USA and at Grove’s manufacturing facility in Europe.
WATM recognise that its people are it’s greatest asset. The majority of the key management team has been with the company in excess of ten years and they are supported by a dedicated and secure workforce.
Cary-Lift 254
SPEED SWiNG 360
Work both on and off the rails with up to a 360°
continuous boom rotation
Maximum load – handling efficiency with maximum
visibility even while loaded.
• Large all-terrain tyres for the road
• Hydraulic controlled Hi-Rails for the track
• A turbo diesel engine provides all-day productivity
• The converter reduction and powershift transmission give maximum torque
• Hi/Lo Range Four-wheel with rear wheel disconnect
• ROPS/FOPS tiltable cab and engine enclosure
Maximum Lift Capacity (on Tires)Front – 6,804 kg | Side – 5,443 kg
Maximum Lift Capacity (on Hi-Rail)Front – 6,804 kg | Side – 3,629 kg
Boom Rotation360° Continuous
Maximum Travel Speed40.2 km/h
• Standard right-hand and left-hand joystick controls
• Maintains maximum lift capacity in a full turn
• Two-wheel, four-wheel and Crab steering
• Emissions certified engine with full electronic control and protection
• Large fuel tank runs for a full workday
• Fully adjustable seat with lumbar support
• Full instrumentation for real-time status of all systems
Maximum Load Capacity (retracted)11,340 kg. Tipping Load – 22,680 kg
Maximum Lift Height4.3m
Below Grade Reach0.2m
Maximum Travel Speed28.5 km/h
Turning Radius (four–wheel steer)7.2m
Cary-Lift 204
SPEED SWiNG 445e
Maximum load – handling efficiency with maximum
visibility even while loaded.• Standard right-hand and left-hand
joystick controls
• Maintains maximum lift capacity in a full turn
• Two-wheel, four-wheel and Crab steering
• Emissions certified engine with full electronic control and protection
• Large fuel tank runs for a full workday
• Fully adjustable seat with lumbar support
• Full instrumentation for real-time status of all systems
Maximum Load Capacity (retracted)9,072 kg. Tipping Load – 18,143 kg
Maximum Lift Height4.27m
Maximum Travel Speed30.74 km/h
Turning Radius (four–wheel steer)6.55mm
Work both on and off the rails with up to a 180° boom rotation
• Large all-terrain tyres for the road
• Hydraulic controlled Hi-Rails for the track
• A turbo diesel engine provides all-day productivity
• The converter reduction and powershift transmission give maximum torque
• Hi/Lo Range Four-wheel with rear wheel disconnect
• ROPS/FOPS tiltable cab and engine enclosure
Maximum Lift Capacity (on Tires)Front – 4,536 kg | Side – 3,629 kg
Maximum Lift Capacity (on Hi-Rail)Front – 4,536 kg | Side – 2,449 kg
Boom Rotation180°
Maximum Travel Speed40.23 km/h
INNER MIDDLE - HEAD INNER RIGHT - HEADINNER LEFT - HEAD
• Standard right-hand and left-hand joystick controls
• Maintains maximum lift capacity in a full turn
• Two-wheel, four-wheel and Crab steering
• Emissions certified engine with full electronic control and protection
• Large fuel tank runs for a full workday
• Fully adjustable seat with lumbar support
• Full instrumentation for real-time status of all systems
FRONT COVER HEADBACK COVER HEAD
Since the 1950’s when Pettibone revolutionised the job site with the world’s first forward - reaching, rough terrain machines, they have continued to provide the global market with superior machines that can takle the toughest conditions.
Quality features like precise hydraulic boom placement, strong axle design and maximum visibility around the cab.
The Pettibone range of machines have been used for many years throughout Australia, working in the harshest of conditions and have exceeded all expectations.
AS A WEST AUSTRALIAN, FAMILY OWNED COMPANY WITH A TOTAL COMMITMENT TO CUSTOMER SATISFACTION, WATM CRANE SALES AND SERVICES WA IS THE PREFERRED CHOICE OF WEST AUSTRALIA’S CRANE HIRE, MINING, CONSTRUCTION AND SERVICE INDUSTRIES.
Customer service is paramount at WATM. From sales to service, repairs to maintenance - the company is committed to providing the best, most cost effective solutions for its customers.
WATM has a strong commitment towards quality and thus continually seeks ways of improving and upgrading its facilities to cater for growing demand and technology. Technical staff are constantly trained on new products including onsite training for key personnel in the USA and at Grove’s manufacturing facility in Europe.
WATM recognise that its people are it’s greatest asset. The majority of the key management team has been with the company in excess of ten years and they are supported by a dedicated and secure workforce.
Cary-Lift 254
SPEED SWiNG 360
Work both on and off the rails with up to a 360°
continuous boom rotation
Maximum load – handling efficiency with maximum
visibility even while loaded.
• Large all-terrain tyres for the road
• Hydraulic controlled Hi-Rails for the track
• A turbo diesel engine provides all-day productivity
• The converter reduction and powershift transmission give maximum torque
• Hi/Lo Range Four-wheel with rear wheel disconnect
• ROPS/FOPS tiltable cab and engine enclosure
Maximum Lift Capacity (on Tires)Front – 6,804 kg | Side – 5,443 kg
Maximum Lift Capacity (on Hi-Rail)Front – 6,804 kg | Side – 3,629 kg
Boom Rotation360° Continuous
Maximum Travel Speed40.2 km/h
• Standard right-hand and left-hand joystick controls
• Maintains maximum lift capacity in a full turn
• Two-wheel, four-wheel and Crab steering
• Emissions certified engine with full electronic control and protection
• Large fuel tank runs for a full workday
• Fully adjustable seat with lumbar support
• Full instrumentation for real-time status of all systems
Maximum Load Capacity (retracted)11,340 kg. Tipping Load – 22,680 kg
Maximum Lift Height4.3m
Below Grade Reach0.2m
Maximum Travel Speed28.5 km/h
Turning Radius (four–wheel steer)7.2m
Cary-Lift 204
SPEED SWiNG 445e
Maximum load – handling efficiency with maximum
visibility even while loaded.• Standard right-hand and left-hand
joystick controls
• Maintains maximum lift capacity in a full turn
• Two-wheel, four-wheel and Crab steering
• Emissions certified engine with full electronic control and protection
• Large fuel tank runs for a full workday
• Fully adjustable seat with lumbar support
• Full instrumentation for real-time status of all systems
Maximum Load Capacity (retracted)9,072 kg. Tipping Load – 18,143 kg
Maximum Lift Height4.27m
Maximum Travel Speed30.74 km/h
Turning Radius (four–wheel steer)6.55mm
Work both on and off the rails with up to a 180° boom rotation
• Large all-terrain tyres for the road
• Hydraulic controlled Hi-Rails for the track
• A turbo diesel engine provides all-day productivity
• The converter reduction and powershift transmission give maximum torque
• Hi/Lo Range Four-wheel with rear wheel disconnect
• ROPS/FOPS tiltable cab and engine enclosure
Maximum Lift Capacity (on Tires)Front – 4,536 kg | Side – 3,629 kg
Maximum Lift Capacity (on Hi-Rail)Front – 4,536 kg | Side – 2,449 kg
Boom Rotation180°
Maximum Travel Speed40.23 km/h
FRONT COVER HEADBACK COVER HEAD
Since the 1950’s when Pettibone revolutionised the job site with the world’s first forward - reaching, rough terrain machines, they have continued to provide the global market with superior machines that can takle the toughest conditions.
Quality features like precise hydraulic boom placement, strong axle design and maximum visibility around the cab.
The Pettibone range of machines have been used for many years throughout Australia, working in the harshest of conditions and have exceeded all expectations.
AS A WEST AUSTRALIAN, FAMILY OWNED COMPANY WITH A TOTAL COMMITMENT TO CUSTOMER SATISFACTION, WATM CRANE SALES AND SERVICES WA IS THE PREFERRED CHOICE OF WEST AUSTRALIA’S CRANE HIRE, MINING, CONSTRUCTION AND SERVICE INDUSTRIES.
Customer service is paramount at WATM. From sales to service, repairs to maintenance - the company is committed to providing the best, most cost effective solutions for its customers.
WATM has a strong commitment towards quality and thus continually seeks ways of improving and upgrading its facilities to cater for growing demand and technology. Technical staff are constantly trained on new products including onsite training for key personnel in the USA and at Grove’s manufacturing facility in Europe.
WATM recognise that its people are it’s greatest asset. The majority of the key management team has been with the company in excess of ten years and they are supported by a dedicated and secure workforce.
Cary-Lift 254
SPEED SWiNG 360
Work both on and off the rails with up to a 360°
continuous boom rotation
Maximum load – handling efficiency with maximum
visibility even while loaded.
• Large all-terrain tyres for the road
• Hydraulic controlled Hi-Rails for the track
• A turbo diesel engine provides all-day productivity
• The converter reduction and powershift transmission give maximum torque
• Hi/Lo Range Four-wheel with rear wheel disconnect
• ROPS/FOPS tiltable cab and engine enclosure
Maximum Lift Capacity (on Tires)Front – 6,804 kg | Side – 5,443 kg
Maximum Lift Capacity (on Hi-Rail)Front – 6,804 kg | Side – 3,629 kg
Boom Rotation360° Continuous
Maximum Travel Speed40.2 km/h
• Standard right-hand and left-hand joystick controls
• Maintains maximum lift capacity in a full turn
• Two-wheel, four-wheel and Crab steering
• Emissions certified engine with full electronic control and protection
• Large fuel tank runs for a full workday
• Fully adjustable seat with lumbar support
• Full instrumentation for real-time status of all systems
Maximum Load Capacity (retracted)11,340 kg. Tipping Load – 22,680 kg
Maximum Lift Height4.3m
Below Grade Reach0.2m
Maximum Travel Speed28.5 km/h
Turning Radius (four–wheel steer)7.2m
Cary-Lift 204
SPEED SWiNG 445e
Maximum load – handling efficiency with maximum
visibility even while loaded.• Standard right-hand and left-hand
joystick controls
• Maintains maximum lift capacity in a full turn
• Two-wheel, four-wheel and Crab steering
• Emissions certified engine with full electronic control and protection
• Large fuel tank runs for a full workday
• Fully adjustable seat with lumbar support
• Full instrumentation for real-time status of all systems
Maximum Load Capacity (retracted)9,072 kg. Tipping Load – 18,143 kg
Maximum Lift Height4.27m
Maximum Travel Speed30.74 km/h
Turning Radius (four–wheel steer)6.55mm
Work both on and off the rails with up to a 180° boom rotation
• Large all-terrain tyres for the road
• Hydraulic controlled Hi-Rails for the track
• A turbo diesel engine provides all-day productivity
• The converter reduction and powershift transmission give maximum torque
• Hi/Lo Range Four-wheel with rear wheel disconnect
• ROPS/FOPS tiltable cab and engine enclosure
Maximum Lift Capacity (on Tires)Front – 4,536 kg | Side – 3,629 kg
Maximum Lift Capacity (on Hi-Rail)Front – 4,536 kg | Side – 2,449 kg
