PHASE | SENCORE: IRDs, Decoders e Turnaround Modulares

AG2600 openGear® Module Receiver Card……………….....p. 2

MRD2600 Modular Receiver…………....................................p. 4

DTE-3137 DekTec DVB-S/S2 to IP Converter…….................p. 6

DTE-3120 DekTec ASI to IP PoE Converter……....................p. 7

DTE-3100 DekTec IP to ASI PoE Converter……....................p. 8

DTE-3200 DekTec OEM Module TS-over-IP Converter..........p. 9

Receiver CardAG 2600 openGear® Module

OVERVIEW

The AG 2600 receiver card leverages the DVB-S2, IP, 8VSB/QAM-B, DVB-T/T2/C/C2/ISDB-T, dual DVB-CI, and ASI designs from Sencore’s newest receiver decoder cards to provide a cost effective multi-channel reception and descrambling platform.

The card integrates into the industry-standard 2RU openGear® OG-3 frame, supporting up to 10 receiver/descrambler pairs per chassis. The AG 2600 is also configurable without the DVB-CI option, and with an optional BISS descrambling support, so it can be matched to any reception infrastructure.

The product is ideal for providing satellite or terrestrial feeds for IP network distribution or integrated transcode infrastructure. Optional PID filtering on the IP output can generate up to 10 MPTS or SPTS outputs from an MPTS input.

Finally, the receiver can be configured with ASI and IP interfaces only for simple turn-around, descrambling, and filtering operations.

Hot swappable cards provide for effortless system expansion, while full SNMP and syslog interfaces and an HTTP-based API support quick and easy integration into multichannel systems. For individual operators, the product features an easy to use web GUI that will be immediately familiar to users of previous Sencore IRDs.

• Extensive automation support via SNMP status, configuration, and traps, HTTP-based APIs, and Syslog

• Shared software and feature-set with Sencore 1RU receivers ensure reliability and interoperability

• Built-in ASI and IP I/O for maximum flexibility

• Available RF and descrambling modules:

√ DVB-S/S2 Interface with Optional Dual DVB-CI

√ DVB-T/T2/C/C2/ISDB-T Interface

√ 8VSB/QAM-B Receiver Designed for A74

√ Codecs auto-detected and switchable on-the-fly

• Failover between any two inputs

• Dual, mirrored TS over IP transmission

• Built-in BISS Mode 1, Mode E, and Multi-key

• Intuitive, straightforward web interface

• Satellite Reception and Descrambling Receive up to ten transponders in 2RU and descramble via dual DVB-CI slots or BISS 1/E. Generate IP and ASI outputs of the full transport stream or a filtered subset.

• Ingest Feeds for Linear OTT Transcoding Generate up to 10 SPTS multicasts from an incoming distribution feed for downstream, server-based transcoding systems.

• Capture Local Terrestrial Channels for Backhaul Receive 8VSB signals and output as IP for fiber backhaul to a remote site. Filter the broadcast stream to transmit only HD or SD services.

• Convert between ASI and IP Connect old and new broadcast equipment while performing simple transport manipulation such as filtering or descrambling.

KEY FEATURES

APPLICATIONS

SATELLITE, DVB-T/T2, IP, ASI, VSB, OR QAM RECEIVER WITH ASI AND IP OUT

openGear® is a registered trademark of Ross Video

AVAILABLE BASE MODULESAG 26000 Processing Card with Built-in ASI I/OAG 26027 Processing Card with Built-in ASI I/O and Dual Gigabit Ethernet Ports

ASI INPUT/OUTPUTASI Input: 1x 75Ω BNCASI Output: 1x 75Ω BNCSupported Bitrate: 250 Kbps to 200 Mbps

IP INPUT/OUTPUT (IF EQUIPPED)Physical Interface: 2x RJ45, 10/100/1000 Auto-NegotiateInput Format: 2x UDP or RTP Streams Constant Bitrate or Null-Stripped RTP Header Extensions Supported SMPTE 2022/CoP3 FEC SupportedOutput Format: 10x UDP StreamsMPE De-encapsulation: Up to 2 PIDs Up to 60 Mbps per MPE PIDIP Encapsulation: 1 to 7 TS Packets per IP PacketAddressing: Unicast or MulticastIGMP compatibility: Version 1, 2 & 3Per TS Bitrate: 250 Kbps to 200 Mbps

MPEG/IP FEC Output License AG 26925Additional Output Formats: Adds RTP & SMPTE 2022/CoP3 FEC on 2x Transmit Instances

OPTIONAL BASE MODULE FUNCTIONALITY

BISS Descrambling License MRD 26921Supported Modes: Mode 1, Mode E, Injected IDMulti-BISS Support: Up to 12 Separate Keys

PID/Service Filtering License MRD 26928Filtering: 10 Independent TS (MPTS or SPTS) created; output via IP or ASITable Regeneration (DVB Mode): PAT regenerationTable Pass-through (DVB Mode): PMT, CAT, NIT pass-throughTable Regeneration (DVB Mode): PAT, SDTTable Pass-through (DVB Mode): PMT, CAT, NIT, EIT, RST, TDT, TOT

DVB-S/S2 INPUT MODULE AG 26116Physical Interface: 2x 75Ω BNCFrequency Range: 950-2150 MHzSymbol Rates: 1-60 MSpsDVB-S Modulation Modes: QPSK (All FEC Rates)DVB-S2 Modulation Modes: QPSK/8PSK (All FEC Rates) 16/32APSK with LicenseSupported Roll-off Factors: 0.35, 0.25, 0.20, 0.15, 0.10, 0.05

DVB-S2 Advanced Feature License AG 26916Additional Modulation Modes: 16ASPK/32APSK (All FEC Rates) VCM, Multistream (Single ISI)

DVB-S/S2 INPUT MODULE WITH DVB-CI AG 26137Physical Interface: Adds two DVB-CI CAM SlotsWithout Multi-Service License: Descrambles Decoded Service OnlyWith Multi-Service License: Number of Services limited by CAM

DVB-CI Multi-Service Descrambling License AG 26991With DVB-CI Capable Input: Enables Multi-service Descrambling

8VSB/QAM-B INPUT MODULE AG 26101Physical Interface: 1x 75Ω BNC Frequency Range: 50-1000 MHzSensitivity: -34 to +40 dBmV (A74 Compliant)

8VSB Standard: ATSC A/53E8VSB Channel Plans: Broadcast

QAM Standard: ITU Annex B/SCTE DVS-031QAM Channel Plans: FCC, IRC, HRCQAM Constellations: QAM64, QAM256

DVB-T/T2/C/C2/ISDB-T INPUT MODULE AG 26115Physical Interface: 1x 75Ω F-TypeFrequency Range: 42-1002 MHzBandwidth: 1.7MHz, 5 MHz, 6MHz, 7MHz, 8MHzConstellations:

DVB-T: QPSK, QAM16, QAM64 (All FEC Rates)DVB-T2: QPSK, QAM16, QAM64, QAM256 (All FEC Rates)DVB-C: QAM16, QAM32, QAM64, QAM128, QAM256 (All FEC Rates)DVB-C2: QAM16, QAM64, QAM256, QAM1024, QAM4096 (All FEC Rates)ISDB-T: QPSK, QAM16, QAM64 (All FEC Rates)

MANAGEMENTUser Interfaces: Full control via web GUIAutomation Interfaces: SNMP status, control, traps Syslog alarm output HTTP Web services API

ENVIRONMENTAL CONDITIONSPower: 100-240 VAC 50/60 Hz Dual, Redundant Supply AvailableOperating Temp: 0° to 50°C

SPECIFICATIONSReceiver Card AG 2600

605.978.4600www.sencore.com

Modular ReceiverMRD 2600

The MRD 2600 receiver shares the professional-

grade front-end collection from Sencore’s newest

decoder designs, but removes the baseband video

and audio components. This makes it a cost-

effective solution for single-transponder, multi-

service descrambling or single channel digital

turnaround applications.

With available satellite, terrestrial (8VSB, QAM-B,

DVB-T/T2/C/C2/ISDB-T), ASI, and IP input modules,

in conjunction with dual-CAM DVB-CI and BISS

descrambling, the MRD 2600 is ideally suited for

transport stream input/output. The product is

a perfect to feed internal IP distribution or front

transcode infrastructure which is missing critical

RF interfaces, especially where density is not a key

requirement.

The MRD 2600 provides a wide range of control

options, including full configuration and status

through the front panel and a clean, easy-to-use

web GUI. It also features a full SNMP interface,

including configurable traps on alarms for easy

integration into an control system, and as with all

Sencore products, Sencore’s professional support

team is just a phone call away in the unlikely event

that questions should arise.

• Built-inASII/Oformaximumvalueandflexibility

• AvailableIPandRFsatelliteI/Omodules:

√8VSB/QAM-BreceiverdesignedforA74

√DVB-T/T2/C/C2/ISDB-Treceiver

√TurboPSKInterfacewithfullmodesupport

√IPInterfacewithredundantreceivepaths

√Dual,mirroredTSoverIPtransmission

• Flexibledescramblingsupport

√TwoDVB-CIInterfacessupportingupto100Mbps

√Flexibleper-PID/serviceconfiguration

√Built-inBISSMode1,ModeEandmulti-key

√Upto12IndependentBISSkeyssupported

• Easy-to-usewebinterface

• Fullcontrol,status,andalarmmonitoringviaSNMP

• Multi-Service DVB-CI Decryption DownlinkaDVB-S2transponder,descramblewithuptotwoprofessionalDVB-CICAMs,andoutputanIPMPTStodownstreamtranscodersordecoders.

• 8VSB Reception and Turnaround ReceivelocalstationsandoutputforbackhaulasASIandIP.8VSBinputinterfacedesignedforstrenuousA74receptionconditions.

• Satellite Reception and BISS Descrambling SimplesolutionforBISS,BISS-E,orMulti-BISSdecryption.TransmittransportsteamintheclearviaASIorIPforadditionalprocessing.

KEY FEATURES

APPLICATIONS

BASE UNIT FEATURES MRD 26000ASIInput: 1x75ΩBNCASIOutput: 1x75ΩBNCSupportedBitrate: 250Kbpsto200Mbps

BISS Descrambling License MRD 26921SupportedModes: Mode1,ModeE,InjectedIDMulti-BISSSupport: Upto12SeparateKeys

DVB-CI Multi-Service MRD 26991WithDVB-CIModule: EnablesMulti-serviceDescrambling

PID/Service Filtering License MRD 26928Filtering: 10IndependentTS(MPTSorSPTS) created;outputviaIPorASITableRegeneration(DVBMode): PATregenerationTablePass-through(DVBMode): PMT,CAT,NITpass-throughTableRegeneration(DVBMode): PAT,SDTTablePass-through(DVBMode): PMT,CAT,NIT,EIT,RST,TDT,TOT

DVB-CI DESCRAMBLING MODULE MRD 26421PhysicalInterface: AddstwoDVB-CICAMSlotsWithoutMulti-ServiceLicense: DescramblesDecodedServiceOnlyWithMulti-ServiceLicense: NumberofServiceslimitedbyCAM

IP INPUT/OUTPUT MODULE MRD 26127PhysicalInterface: 2xRJ45,10/100/1000Auto-NegotiateInputFormat: UDPorRTP ConstantBitrateorNull-Stripped RTPHeaderExtensionsSupported SMPTE2022/CoP3FECSupportedOutputFormat: UDPMPEDe-encapsulation: Upto2PIDs Upto60MbpsperMPEPIDIPEncapsulation: 1to7TSPacketsperIPPacketAddressing: UnicastorMulticastIGMPcompatibility: Version1,2&3PerTSBitrate: 250Kbpsto200Mbps

MPEG/IP FEC Output License MRD 26925AdditionalOutputFormats: RTPandHeaderExtensions SMPTE2022/CoP3FECSupported

DVB-S/S2 INPUT MODULE MRD 26116PhysicalInterface: 4x75ΩF-TypeFrequencyRange: 950-2150MHzSymbolRates: 1-60MSpsDVB-SModulationModes: QPSK(AllFECRates)DVB-S2ModulationModes: QPSK/8PSK(AllFECRates) 16/32APSKwithLicenseLNBPower: Off/13/14/18/19VDC@450mAControlToneSupport: 22kHzOn/Off

DVB-S2 Advanced Feature License MRD 26916AdditionalModulationModes: 16ASPK/32APSK(AllFECRates) VCMDemodulationSupport MultistreamSupport(SingleISI)

8VSB/QAM-B INPUT MODULE MRD 26101PhysicalInterface: 1x75ΩF-TypeFrequencyRange: 50-1000MHzSensitivity: -34to+40dBmV(A74Compliant)

8VSBStandard: ATSCA/53E8VSBChannelPlans: Broadcast

QAMStandard: ITUAnnexB/SCTEDVS-031QAMChannelPlans: FCC,IRC,HRCQAMConstellations: QAM64,QAM256

BROADCOM TURBOPSK INPUT MODULE MRD 26111PhysicalInterface: 1x75ΩF-TypeFrequencyRange: 950-2150MHzSymbolRates: 1-30MSpsDVB-SModulationModes: QPSK(AllFECRates)TurboPSKModulationModes: QPSK/8PSK(AllFECRates)

DVB-T/T2/C/C2/ISDB-T INPUT MODULE MRD 26115PhysicalInterface: 1x75ΩF-TypeFrequencyRange: 42-1002MHzBandwidth: 1.7MHz,5MHz,6MHz,7MHz,8MHzConstellations:DVB-T: QPSK,QAM16,QAM64(AllFECRates)DVB-T2: QPSK,QAM16,QAM64,QAM256(All FECRates)DVB-C: QAM16,QAM32,QAM64,QAM128, QAM256(AllFECRates)DVB-C2: QAM16,QAM64,QAM256, QAM1024,QAM4096(AllFECRates)ISDB-T: QPSK,QAM16,QAM64(AllFECRates)

MANAGEMENTConnector: RJ-4510/100-AutoNegotiatingProtocols: HTTPandSNMPUserInterfaces: FullcontrolviawebGUI FullcontrolviafrontpanelAutomationInterfaces: FullstatusandcontrolviaSNMP ConfigurableSNMPtraps WebservicesAPIavailable SyslogmessageloggingFirmwareUpdates: ViaWebGUI

DIMENSIONS/POWERHeight: 1RU,1.72”(44mm)Width: 1RU,17.2”(437mm)Depth: 14.6”(370mm)Power: 100-240VAC50/60Hz 36-72VDCSupplyOptions: SingleACPowerSupply(Standard) DualACPowerSupply SingleDCPowerSupply

ENVIRONMENTAL CONDITIONSOperatingTemp: 0°to45°CStorageTemp: -40°Cto65°CRelativeOperatingHumidity:

CONTROL

STANDARDS

ORDERING INFORMATION

IP-address assignment DHCP or static

Multicast support IGMP v2

Device management Browser based

Network management SNMP v2c

Discovery WS-Discovery

Standard Mode

EN301 210 DVB-S

EN 302 307 DVB-S2: QPSK, 8/16/32APSKCCM only

Type Description

DTE-3137 Networked DVB-S(2) Receiver

Networked DVB-S(2) Satellite ReceiverDekTec DTA-3137

□ Compact professional satellite receiver

□ Full TS output on IP and DVB-ASI

□ LNG power insertion

• Standalone DVB-S2 receiver supporting QPSK, 8PSK, 16PSK and 32PSK

• DVB-S2 demodulation compliant to EN302-307 and EN301-210, as well as legacy DVB-S support

• Web and SNMP interface for setting parameters and observing status

• Unit can be powered via the Ethernet cable (Power over Ethernet) or through a DC power supply jack

• LNB power insertion

• Full support of SMPTE 2022-1/2, with 2D FEC encoder for robust transport over IP

• LCD status display shows device identifier, mode, carrier frequency, level, SNR, BER and IP/MAC address

• Install up to 12 modules in 3U 19” rack space using DekTec rack-mountable rail

• SMATV: Redistribution of satellite TV

• General-purpose receiver for obtaining the full transport stream from a DVB-S2 signal

KEY ATTRIBUTESKEY FEATURES

APPLICATIONS

605.978.4600www.sencore.com

Parameter Value

RF Input Connector 75Ω F Female

Return loss >10dB

Tuning range 950 to 22150MHz

Sensitivity -30 to -60dBm

Baud rate 2 to 40MBd

LNB Supply 13V/18V 400mA

22kHz tone on/off

TS outputASI port

Connector 75Ω BNC

DVB-ASI EN50083-9

GigE port Connector RJ-45

Physical layer IEEE 802.3at

Transport TP per IP 1 to 7 UDP/RTP

FEC SMPTE 2022-1

Device power

Connector 2.1 mm DC plug

24 V supply 22 to 30V; 17W

Sencore is the preferred distributor of DekTec in North America.

ASI to IP PoE ConverterDekTec DTE-3120

□ DVB-ASI to TSoIP converter

□ UDP, RTP, 2D FEC (SMPTE-2022))

□ Power over Ethernet enabled

• StandalonemodulecaneitherbeusedascompactautonomousASItoTS-over-IP(TSoIP)gateway,orasremoteI/OdeviceforPC-basedapplications

• SMPTE-2022andDTAPImode

• Timestampingformonitoringapplications

• Power-over-Ethernetsupport:Noseparatepowerfeedrequired

• Activeloop-throughwithfail-overrelaysforinput-to-outputlinkincaseofpowerfailure

• SupportsIPencapsulationand2DFECencodingaccordingtoSMPTE2022-1/2

• LCDstatusdisplayshowsdeviceidentifier,bitrate,IP/MACaddressandstatus

• UniformsoftwareaccesstoDekTecTSoIP-,PCI-andUSBdevicesthroughDTAPI

• Installupto14modulesin3U19”rackspaceusingtheDekTecrack-mountablerail,orunitscanbemountedonaDINraildirectlyonawall

• AutonomousASItoTSoIPgateway

• WithDTE-3100:TunnellingofASIsignalsoverLAN,WANortheInternet

• RemoteASIinputadapterforserver-basedanalyzers,monitoringapplications(Xpect),multiplexersandsimilarsystems

KEY ATTRIBUTES

CONTROL

RELATED PRODUCTS

ORDERING INFORMATION

KEY FEATURES

APPLICATIONS

605.978.4600www.sencore.com

Parameter Value

GigEPort Physicallayer IEEE802.3af

DataRate 10/100/1000

Connector RJ-45

ASIPort PhysicalLayer DVB-ASI(coax)

Connector 75-ΩBNC(2x)

Rxbitrate 0..214Mbit/s

Returnloss 17dBtyp.

Transport TSperIP 1-7

Encapsulation UDPorRTP

FEC SMPTE2022

ASItoTSoIPlatency 10ms

Buffersize 32MB

DVBID 5823

IP-addressassignment DHCPorstatic

Multicastsupport IGMPv2

Devicemanagement browserbased

Networkmanagement SNMPv2c

Discovery WS-discovery

Type Description

DTE-3100 NetworkedASIOutput

Type Description

DTE-3120 NetworkedASIinputadapter

DTE-3120-DP DTE-3120withDtTV,DtGrabber+

DTE-3120-SX DTE-3120-DPwithStreamXpert

SencoreisthepreferreddistributorofDekTecinNorthAmerica.

IP to ASI PoE ConverterDekTec DTE-3100

□ TSoIP to DVB-ASI converter

□ UDP, RTP, 2D FEC (SMPTE-2022)

□ Power over Ethernet enabled

• StandalonemodulecaneitherbeusedascompactautonomousTS-over-IP(TSoIP)toASIgateway,orasremoteI/OdeviceforPC-basedapplications

• SMPTE-2022andDTAPImode

• Power-over-Ethernetsupport:noseparatepowerfeedrequired

• AdvancedtimereconstructionalgorithmtoovercomeIPjitter,withprogrammablesizeofjittertolerancebuffer

• SupportsIPde-encapsulationand2DFECdecodingaccordingtoSMPTE2022-1/2

• LCDstatusdisplayshowsdeviceidentifier,bitrate,IP/MACaddressandstatus

• UniformsoftwareaccesstoDekTecTSoIP,PCIandUSBdevicesthroughDTAPI

• Installupto14modulesin3U19”rackspaceusingtheDekTecrackmountablerail,orunitscanbemountedonaDINraildirectlyonawall

• AutonomousTSoIPtoASIgateway

• WithDTE-3120:TunnellingofASIsignalsoverLAN,WANortheinternet

• RemoteASIoutputadapterforserverbaseddatainserters,streamservers,multiplexersandsimilarsystems

KEY ATTRIBUTES

CONTROL

RELATED PRODUCTS

ORDERING INFORMATION

KEY FEATURES

APPLICATIONS

605.978.4600www.sencore.com

Parameter Value

GigEPort Physicallayer IEEE802.3af

Datarate 10/100/1000

Connector RJ-45

ASIPort Physicallayer DVB-ASI(coax)

Connector 75-ΩBNC(2x)

Txbitrate 0-214Mbit/s

Resolution

OEM Module TS-over-IP ConverterDekTec DTM-3200

□ Converts ASI to IP or IP to ASI

□ Parallel TS port

□ UDP, RTP, 2D FEC (SMPTE-2022)

• CompactOEMmoduleforinterfacingTransportStreamstoanetwork.TheDTM-3200convertsIPtoASI,orASItoIP

• Additional8-bitparallelTransportStreamI/Oportona26-wayboxedheaderforeasyconnectivitytocustomhardware

• AdvancedIP-jitterfilteringalgorithm,withprogrammablejittertolerance

• IPencapsulationand2D-FECencodinganddecodingasdefinedinSMPTE2022

• UnicastandmulticastIPaddressing

• Severalinterfacestandards(RS-232,422,485andI2C)supportedforserialcontroloftheOEMmodule

• Persistentstorageofconfigurationparameters

• EasywaytoaddaTS-over-IPinputorout-puttoyourTS-processingproduct

• TunnellingofASIsignalsoverLAN,WANortheInternet

KEY ATTRIBUTES

ORDERING INFORMATION PROTOCOL SUPPORT

KEY FEATURES

APPLICATIONS

605.978.4600www.sencore.com

Parameter Value

GigEport Physicallayer IEEE802.3a

Datarate 100/1000

Connector RJ-45withLEDs

DVB-ASIport Physicallayer EN50083-9

Connector 1x75-ΩMCX

Txbitrate 0.01..214Mbit/s

Parallelport Physicallayer M-LVDS

Signals Clock,sync,valid,8-bitdata

Connector 26-wayheader

Transport TPperIP 1..7

Encapsulation UDPorRTP

FEC SMPTE2022

TSoIPtoASIlatency* 1ms

Jittertolerancerange 1..500ms

DimensionsWxHxD 80x55x14mm

DTM-3200 OEMTS-over-IPconverter

DTM-3200-RA OEMTS-over-IPconverterwithright-angleconnectors

Ethernetencapsulation IEEE802.2SNAP,Eth.II

IPsupport IPv4

IP-addressassignment DHCP,linklocalorstatic

Multicastsupport IGMPv2

Devicemanagement Outofband:RS-232,RS-422,RS-485,I2C

Networkmanagement Notsupported

*ExcludingFECreconstructionandjittertolerancedelay.

SencoreisthepreferreddistributorofDekTecinNorthAmerica.

PHASE ENGENHARIA

EXCLUSIVE REPRESENTATIVE:

PHASE Engenharia Ind. e Com. Ltda.

Av. Olegário Maciel 231, Lojas 101 a 105

Barra da Tijuca | Rio de Janeiro, RJ | CEP 22 621 200

Tel +55.21.2493.0125

Av. Ibirapuera 2.907, Conj. B306 & 7 - Ed. Conv. Corp. Plaza – Torre C

Indianópolis | São Paulo-SP | CEP 04029-200

Tel +55 11 3589-0125

phase@phase.com.br | www.phase.com.br

AG_2600_Receiver_Card v3DMG 3200 1RU-4RU Datasheet v3 (1)DMG_1200_Gateway v6MRD_2600_Modular_Receiver v6DTA-3137DTE3120DTE3100DTM3200