1
HEAT EXCHANGERS Ametek, Chemical Products Diu. Wilmington. Del. Supercoil heat exchangers from Ametek Inc. are designed for heating and cooling a wide range of metal-finishing solutions including electroplating, electroforming, and electroless plating baths; acidic and alkaline solutions for etching; chemical milling; anodizing; cleaning; stripping; electropol- ishing; and similar operations. Supercoils can be installed into virtually any type of tank configu- ration. Ametek Minicoil heat exchangers are used to control temperatures in laboratory baths and small production tanks where corrosion is a prob- lem and are widely used for etching and precious metal plating. Circle 160 on reader information card PHOSPHATE HEATER Process Technology Mentor, Ohio Process Technology has designed a heater specif- ically for the difficult application of phosphate heating. These heaters last longer than tradi- tional designs because of their unique construc- tion. They are available in a variety of sizes for both over-the-side and bottom heater applica- tions. Circle 161 on reader information card INFRARED HlAnNG SYSTUIS Thermal Innovations Corp. Manasquan, N.J. Thermal Innovations Corp. specializes in the de- sign and installation of infrared heating systems. The p 3 Gas Infrared Systems can produce IR en- ergy at peak wavelengths of 3.5 to 2.3 microns n,OOO-1,750°Fl at output power densities ranging from 9,000 to 40,000 Btu/ffl/hr. Circle 162 on reader information card October 1999 27
