PHOTOCOUPLER

PS2832-1,-4,PS2833-1,-4HIGH COLLECTOR TO EMITTER VOLTAGE

4, 16-PIN SOP PHOTOCOUPLER −NEPOC Series−

DESCRIPTION

The PS2832-1, -4 and PS2833-1, -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon darlington-connected phototransistor.

The package is an SOP (Small Outline Package) type for high density mounting applications.

FEATURES • High collector to emitter voltage (VCEO = 300 V: PS2832-1, -4) (VCEO = 350 V: PS2833-1, -4) • Small and thin package (4, 16-pin SOP, Pin pitch 1.27 mm) • High isolation voltage (BV = 2 500 Vr.m.s.) • High current transfer ratio (CTR = 2 000 % TYP.) • Ordering number of tape product: PS2832-1-F3, F4, PS2832-4-F3, F4 PS2833-1-F3, F4, PS2833-4-F3, F4 • Safety standards: PS2832-1, -4 • UL approved: File No. E72422 (S) • BSI approved: No. 8315, 8316 • VDE0884 approved (Option) PS2833-1, -4

• UL approved: File No. E72422 (S) APPLICATIONS • Hybrid IC • Telephone/Telegraph Receiver • FAX

The mark shows major revised points. Document No. PN10257EJ01V0DS (1st edition) (Previous No. P14023EJ3V0DS00) Date Published February 2003 CP(K)

PS2832-1,-4,PS2833-1,-4

PACKAGE DIMENSIONS (UNIT: mm)

M0.12 0.4±0.11.27

0.1±

0.1

0.1±

0.1

4.47.0±0.3

0.5±0.3

0.15

+0.

10–0

.05

1.27

2.7±0.34 3

1 2

10.3±0.3

1 8

16 9

PS2832-1PS2833-1

PS2832-4PS2833-4

M0.12 0.40+0.10–0.05

4.4

7.0±0.3

0.5±0.3

0.15

+0.

10–0

.05

4 3

1 2 1 2 3 4 5 6 7 8

16 15 14 13 12 11 10 9

1. Anode2. Cathode3. Emitter4. Collector

1. 3. 5. 7. Anode 2. 4. 6. 8. Cathode 9. 11. 13. 15. Emitter10. 12. 14. 16. Collector

2.0±

0.1

2.0

+0.

3–0

.2

MARKING

32003 Assembly Lot

0 03Week Assembled

Last number of type No. : 32/33

PS2832-1PS2833-1

N 0 03

Country AssembledType NumberAssembly Lot

No. 1 pinMark

PS2832-4PS2833-4

PS2832-4 N 003

Week AssembledYear Assembled(Last 1 Digit)

Year Assembled(Last 1 Digit)

CTR Rank Code

Data Sheet PN10257EJ01V0DS 2

PS2832-1,-4,PS2833-1,-4

ORDERING INFORMATION (Solder Contains Lead)

Part Number Package Packing Style Safety Standards

Approval Application Part

Number*1

PS2832-1 4-pin SOP 50 pcs (Tape 50 pcs cut) Approved products PS2832-1

PS2832-1-F3 Embossed Tape 3 500 pcs/reel other than VDE

PS2832-1-F4

PS2832-4 16-pin SOP Magazine Case 45 pcs PS2832-4

PS2832-4-F3 Embossed Tape 2 500 pcs/reel

PS2832-4-F4

PS2832-1-V 4-pin SOP 50 pcs (Tape 50 pcs cut) VDE0884 approved PS2832-1

PS2832-1-V-F3 Embossed Tape 3 500 pcs/reel (Option)

PS2832-1-V-F4

PS2832-4-V 16-pin SOP Magazine Case 45 pcs PS2832-4

PS2832-4-V-F3 Embossed Tape 2 500 pcs/reel

PS2832-4-V-F4

PS2833-1 4-pin SOP 50 pcs (Tape 50 pcs cut) Approved products PS2833-1

PS2833-1-F3 Embossed Tape 3 500 pcs/reel other than VDE

PS2833-1-F4

PS2833-4 16-pin SOP Magazine Case 45 pcs PS2833-4

PS2833-4-F3 Embossed Tape 2 500 pcs/reel

PS2833-4-F4

*1 For the application of the Safety Standard, following part number should be used.

Data Sheet PN10257EJ01V0DS 3

PS2832-1,-4,PS2833-1,-4

ORDERING INFORMATION (Pb-Free)

Part Number Package Packing Style Safety Standards

Approval Application Part

Number*1

PS2832-1-A 4-pin SOP 50 pcs (Tape 50 pcs cut) Approved products PS2832-1

PS2832-1-F3-A Embossed Tape 3 500 pcs/reel other than VDE

PS2832-1-F4-A

PS2832-4-A 16-pin SOP Magazine Case 45 pcs PS2832-4

PS2832-4-F3-A Embossed Tape 2 500 pcs/reel

PS2832-4-F4-A

PS2832-1-V-A 4-pin SOP 50 pcs (Tape 50 pcs cut) VDE0884 approved PS2832-1

PS2832-1-V-F3-A Embossed Tape 3 500 pcs/reel (Option)

PS2832-1-V-F4-A

PS2832-4-V-A 16-pin SOP Magazine Case 45 pcs PS2832-4

PS2832-4-V-F3-A Embossed Tape 2 500 pcs/reel

PS2832-4-V-F4-A

PS2833-1-A 4-pin SOP 50 pcs (Tape 50 pcs cut) Approved products PS2833-1

PS2833-1-F3-A Embossed Tape 3 500 pcs/reel other than VDE

PS2833-1-F4-A

PS2833-4-A 16-pin SOP Magazine Case 45 pcs PS2833-4

PS2833-4-F3-A Embossed Tape 2 500 pcs/reel

PS2833-4-F4-A

*1 For the application of the Safety Standard, following part number should be used.

Data Sheet PN10257EJ01V0DS 4

PS2832-1,-4,PS2833-1,-4

ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified)

Ratings Parameter Symbol

PS2832-1 PS2833-1 PS2832-4 PS2833-4 Unit

Diode Forward Current (DC) IF 50 mA

Reverse Voltage VR 6 V

Power Dissipation Derating ∆PD/°C 0.6 0.8 mW/°C

Power Dissipation PD 60 80 mW/ch

Peak Forward Current*1 IFP 1 A

Transistor Collector to Emitter Voltage VCEO 300 350 300 350 V

Emitter to Collector Voltage VECO 0.3 V

Collector Current IC 60 mA/ch

Power Dissipation Derating ∆PC/°C 1.2 mW/°C

Power Dissipation PC 120 mW/ch

Isolation Voltage*2BV 2 500 Vr.m.s.

Operating Ambient Temperature TA −55 to +100 °C

Storage Temperature Tstg −55 to +150 °C

*1 PW = 100 µs, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output

Data Sheet PN10257EJ01V0DS 5

PS2832-1,-4,PS2833-1,-4

ELECTRICAL CHARACTERISTICS (TA = 25 °C)

Parameter Symbol Conditions MIN. TYP. MAX. Unit

Diode Forward Voltage VF IF = 10 mA 1.2 1.4 V

Reverse Current IR VR = 5 V 5 µA

Terminal Capacitance Ct V = 0 V, f = 1 MHz 15 pF

Transistor Collector to Emitter Dark Current

ICEO IF = 0 mA, VCE = 300 V 400 nA

Coupled Current Transfer Ratio (IC/IF)

CTR IF = 1 mA, VCE = 2 V 400 2 000 4 500 %

Collector Saturation Voltage VCE (sat) IF = 1 mA, IC = 2 mA 1.0 V

Isolation Resistance RI-O VI-O = 1 kVDC 1011 Ω

Isolation Capacitance CI-O V = 0 V, f = 1 MHz 0.4 pF

Rise Time*1tr VCC = 5 V, IC = 10 mA, RL = 100 Ω 20 µs

Fall Time*1tf 5

*1 Test circuit for switching time

VCC

VOUT

RL = 100 Ω

IF

50 Ω

Pulse Input

PW = 1 msDuty cycle = 1/10

In monitor

Data Sheet PN10257EJ01V0DS 6

PS2832-1,-4,PS2833-1,-4

TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified)

–50 –25 0 25 50 75 100

10 000

100 000

1 000

100

10

1Col

lect

or to

Em

itter

Dar

k C

urre

nt I

CE

O (

nA)

Ambient Temperature TA (˚C)

COLLECTOR TO EMITTER DARKCURRENT vs. AMBIENT TEMPERATURE

Ambient Temperature TA (˚C)

Dio

de P

ower

Dis

sipa

tion

PD (

mW

)

DIODE POWER DISSIPATION vs.AMBIENT TEMPERATURE

25 50 75 100

100

80

60

40

20

0

0.8 mW/˚C

0.6 mW/˚C

PS2832-4PS2833-4

PS2832-1PS2833-1 1.2 mW/˚C

PS2832-1, -4PS2833-1, -4

25 50 75 100

120

100

80

60

40

20

0

Tra

nsis

tor

Pow

er D

issi

patio

n P

C (

mW

)

Ambient Temperature TA (˚C)

TRANSISTOR POWER DISSIPATIONvs. AMBIENT TEMPERATURE

100

50

10

5

1

0.5

0.1

0.7 0.9 1.1 1.3 1.50.8 1.0 1.2 1.4

For

war

d C

urre

nt I

F (

mA

)

Forward Voltage VF (V)

FORWARD CURRENT vs.FORWARD VOLTAGE

0 ˚C–25 ˚C–50 ˚C

TA = +100 ˚C +60 ˚C +25 ˚C

Col

lect

or C

urre

nt I

C (

mA

)

Collector to Emitter Voltage VCE (V)

COLLECTOR CURRENT vs.COLLECTOR TO EMITTER VOLTAGE

1 2 3 4 5

100

50

10

5

10

1 mA

5 mA 3 mA2 mA

IF = 0.5 mA

Col

lect

or C

urre

nt I

C (

mA

)

Collector Saturation Voltage VCE (sat) (V)

COLLECTOR CURRENT vs.COLLECTOR SATURATION VOLTAGE

0.4 0.6 0.8 1.0 1.2 1.4 1.6

100

50

10

5

1

IF = 0.5 mA

1 mA

5 mA

2 mA3 mA

CTR = 1 068 %2 290 %4 360 %

VCEO = 300 V

Data Sheet PN10257EJ01V0DS 7

PS2832-1,-4,PS2833-1,-4

VCC = 10 V,IC = 10 mA,CTR = 2 300 %

1 000

100

10

1

0.110 50 100 500 1000

Load Resistance RL (Ω)

SWITCHING TIME vs.LOAD RESISTANCE

Sw

itchi

ng T

ime

t (

s)

µ

Normalized to 1.0at TA = 25 ˚C,IF = 1 mA, VCE = 2 V

Nor

mal

ized

Cur

rent

Tra

nsfe

r R

atio

CT

R

Ambient Temperature TA (˚C)

NORMALIZED CURRENT TRANSFERRATIO vs. AMBIENT TEMPERATURE

–50 –25 0 25 50 75 100

1.4

1.0

1.2

0.8

0.6

0.4

0.2

0.0

Cur

rent

Tra

nsfe

r R

atio

CT

R (

%)

Forward Current IF (mA)

CURRENT TRANSFER RATIO vs.FORWARD CURRENT

0.1 10.5 105 40

4 000

4 500

3 500

3 000

2 500

2 000

1 500

1 000

500

0

IF = 1 mA TA = 25 ˚C

60 ˚C

Time (Hr)

CT

R (

Rel

ativ

e V

alue

)

LONG TERM CTR DEGRADATION

10 102 103 104 105 106

1.2

1.0

0.8

0.6

0.4

0.2

0.0

trtftdts

VCE = 2 V

Sample ABC

Remark The graphs indicate nominal characteristics.

Data Sheet PN10257EJ01V0DS 8

PS2832-1,-4,PS2833-1,-4

TAPING SPECIFICATIONS (UNIT: mm)

Outline and Dimensions (Reel)

Packing: 3 500 pcs/reel

2.0±0.5

R 1.0

13.0±0.2φ

21.0±0.8φ

Tape Direction

PS2832-1-F3PS2833-1-F3

PS2832-1-F4PS2833-1-F4

Outline and Dimensions (Tape)

1.55±0.1

4.0±0.1

2.0±0.1

4.0±0.1 1.75

±0.

1

2.8 MAX.

7.55

±0.

1

0.3

7.5±

0.1

16.0

±0.

3

2.85±0.1 2.3±0.1

1.5+0.1–0 φ

330±

2.0

φ 100±

1.0

φ

2.0±0.5

15.9 to 19.4Outer edge offlange

21.5±1.0

17.5±1.0

32003

32003

32003

32003

32003 32

003

3200

3

3200

3

3200

3

3200

3

Data Sheet PN10257EJ01V0DS 9

PS2832-1,-4,PS2833-1,-4

Tape Direction

PS2832-4-F3PS2833-4-F3

PS2832-4-F4PS2833-4-F4

Outline and Dimensions (Reel)

Packing: 2 500 pcs/reel

2.0±0.5

R 1.0

13.0±0.2φ

21.0±0.8φ

Outline and Dimensions (Tape)

1.55±0.1

12.0±0.1

2.0±0.14.0±0.1 1.

75±

0.1

16.0

±0.

3

8.3±0.1

2.8 MAX.

10.7

±0.

1

0.3

2.3±0.1

7.5±

0.1

1.5+0.1–0 φ

330±

2.0

φ 100±

1.0

φ

2.0±0.5

15.9 to 19.4Outer edge offlange

21.5±1.0

17.5±1.0

Data Sheet PN10257EJ01V0DS 10

PS2832-1,-4,PS2833-1,-4

NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering

• Peak reflow temperature 260°C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220°C 60 seconds or less • Time to preheat temperature from 120 to 180°C 120±30 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a

maximum chlorine content of 0.2 Wt% is recommended.)

120±30 s(preheating)

220˚C

180˚C

Pac

kage

Sur

face

Tem

pera

ture

T (

˚C)

Time (s)

Recommended Temperature Profile of Infrared Reflow

(heating)to 10 s

to 60 s

260˚C MAX.

120˚C

(2) Wave soldering • Temperature 260°C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120°C or below (package surface temperature) • Number of times One (Allowed to be dipped in solder including plastic mold portion.) • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine

content of 0.2 Wt% is recommended.)

(3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.

2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between

collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings.

Data Sheet PN10257EJ01V0DS 11

PS2832-1,-4,PS2833-1,-4

USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity.

Data Sheet PN10257EJ01V0DS 12

Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailedwith the requirements of European Union (EU) Directive 2002/95/EC RestrictioSubstances in electrical and electronic equipment (RoHS) and the requiremen2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. Ththat the device is Pb-free. The –AZ suffix is used to designate devices containiexempted from the requirement of RoHS directive (*). In all cases the devices All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledgo into its products as of the date of disclosure of this information.

Restricted Substance per RoHS

Concentration Limit per RoHS (values are not yet fixed)

Concein

-A Lead (Pb) < 1000 PPM Not Detect

Mercury < 1000 PPM N

Cadmium < 100 PPM N

Hexavalent Chromium < 1000 PPM N

PBB < 1000 PPM N

PBDE < 1000 PPM N

If you should have any additional questions regarding our devices and compliastandards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communicationcontent of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowprovided by third parties and makes no representation or warranty as to the accuracy of such information. Eintegrate information from third parties. CEL has taken and continues to take reasonable steps to provide reinformation but may not have conducted destructive testing or chemical analysis on incoming materials and suppliers consider certain information to be proprietary, and thus CAS numbers and other limited informationrelease. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL pacustomer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.

4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279

below are compliant n on Use of Hazardous ts of EU Directive

e suffix –A indicates ng Pb which are have Pb-free terminals.

ge of the materials that

ntration contained CEL devices

-AZ ed (*)

ot Detected

ot Detected

ot Detected

ot Detected

ot Detected

nce to environmental

s concerting the substance ledge and belief on information fforts are underway to better presentative and accurate chemicals. CEL and CEL may not be available for

rt(s) at issue sold by CEL to