PHOTOMULTIPLIER TUBESAND ASSEMBLIES
FOR SCINTILLATION COUNTING & HIGH ENERGY PHYSICS
INTRODUCTIONIn radiation measurements, scintillation counters which are combinations of scintillators and photomultiplier tubes are used as most common and useful devices in detecting X-, alpha-, beta-, gamma-rays and other high energy charged particles. A scintillator emits flashes of light in response to input radiations and a photomultiplier tube coupled to a scintillator detects these scintillation lights in a precise way.In high energy physics experiments, one of important apparatuses is a Cherenkov counter in which photomultiplier tubes detect Cherenkov radiations emitted by high energy charged particles passing through a dielectric material.To detect radiations accurately, photomultiplier tubes may be required to have high detecting efficiency (QE & energy resolution), wide dynamic range (pulse linearity), good time resolution (T.T.S.), high stablility & reliability, and to be operatable in high magnetic field environment or at high temperature condition. In addition, a ruggedized construction is required according to circumstances. On the other hand, several kinds of position sensitive photomultiplier tubes have been developed and are used in these measurements.This catalog provides a quick reference for Hamamatsu photomultiplier tubes, especially designed or selected for scintillation counters and Cherenkov radiation detectors, and includes most of types currently available ranging in size from 3/8" through 20" in diameter. It should be noted that this catalog is just a starting point in describing Hamamatsu product line since new types are continuously under-development.Please feel free to contact us with your specific requirements.
PHOTOMULTIPLIER TUBES AND ASSEMBLIESFor scintillation counting & high energy physics
TABLE OF CONTENTS
Photomultiplier tubes PageOperating characteristics ......................................................................... 2List guide for photomultiplier tubes ........................................................ 18Photomultiplier tubes ............................................................................. 20Photomultiplier tube assemblies ............................................................ 26Dimensional outlines and basing diagrams for photomultiplier tubes ... 30Typical gain characteristics ................................................................... 52Voltage distribution ratios ...................................................................... 56
PMT socket assembliesQuick reference for PMT socket assemblies ......................................... 58Dimensional outlines and circuit diagrams for PMT socket assemblies ..... 60
Dimensional outlines for E678 series sockets ....................... 68
Index by type No. ...................................................................... 70
Cautions and warranty ............................................................. 72
Typical photocathode spectral response and emission spectrum of scintillators .................................. 73
2
Operating characteristicsThis section describes the prime features of photomultiplier tube construction and basic operating characteristics.
1. GENERAL
The photomultiplier tube (PMT) is a photosensitive device consisting of an input window, a photocathode, focusing electrodes, an electron multiplier (dynodes) and an anode in a vacuum tube, as shown in Figure 1. When light enters the photocathode, the photocathode emits photoelectrons into vacuum by the external photoelectric effect. These photoelec-trons are directed by the potential of focusing electrode towards the electron multiplier where electrons are multiplied by the process of secondary electron emission.The multiplied electrons are collected to the anode to produce output signal.
2. PHOTOCATHODE
2.1 Spectral response
The photocathode of PMT converts energy of incident light into photoelectrons by the external photoelectric effect. The conver-sion efficiency, that is photocathode sensitivity, varies with the wavelength of incident light. This relationship between the photocathode sensitivity and the wavelength is called the spectral response characteristics.Typical spectral response curves of the variation of bialkali photocathodes are shown on the inside of the back cover.The spectral response range is determined by the photocath-ode material on the long wavelength edge, and by the window material on the short wavelength edge.In this catalog, the long wavelength cut-off of spectral response range is defined as the wavelength at which the cathode radiant sensitivity drops to 1 % of the maximum sensitivity.
2.2 Quantum efficiency and radiant sensitivitySpectral response is usually expressed in term of quantum efficiency and radiant sensitivity as shown on the inside the back cover.Quantum efficiency (QE) is defined as the ratio of the number of photoelectrons emitted from the photocathode to the number of incident photons.It's customarily stated as a percentage. The equation of QE is as follows:
2.3 Window materials
The window materials commonly used in PMT are as follows:
(1) Borosilicate glass
This is the most frequently used material. It transmits light from the infrared to approximately down to 300 nm.For some scintillation applications where radioactivity of K40 contained in the glass affects the measurement, "K-free" glass is recommended.As "K-free" glass contains very little amount of Potassium, the background counts originated by 40K is minimized.
(2) UV-transmitting glass
This glass transmits ultraviolet light well as the name implies, and it is widely used. The UV cut-off wavelength is approxi-mately 185 nm.
(3) Silica glass
This material transmits ultraviolet light down to 160 nm. Silica is not suitable for the stem material of tubes because it has a different thermal expansion coefficient from kovar metal which is used for the tube leads. Thus, borosilicate glass is used for the stem. In order to seal these two materials having different thermal expansion ratios, a technique called graded seal is used. This is a technique to seal several glass materials having gradually different thermal expansion ratios. Another feature of silica is superiority in radiation hardness.
2.4 Photocathode materials
The photocathode is a photoemissive surface with very low work and high energy physics applications:
(1) Bialkali
This has a spectral response which fits the emission spectra of most scintillators. Thus, it is frequently used for scintillator applications.
(2) High temperature bialkali
This is particularly useful at higher operating temperatures up to 175 °C. Its major application is oil well logging. Also it can be operated with very low dark current at the room temperature.
Radiant sensitivity (S) is the photoelectric current from the photocathode divided by the incident radiant power at a given wavelength, expressed in A/W (ampere per watt).The equation of S is as follows:
Quantum efficiency and radiant sensitivity have the following relationship at a given wavelength.
where λ is the wavelength in nm (nanometer).
Figure 1: Cross-section of head-on type PMT
TPMHC0048EA
Number of photonsNumber of photoelectrons
QE = ×100 (%)
Radiant power of lightPhotoelectric current
S = (A/W)
λS×1240
QE = ×100 (%)
PHOTOCATHODE
INCIDENTLIGHT
ELECTRON MULTIPLIER(DYNODES)
ANODE
INPUTWINDOW
FOCUSING ELECTRODES
PHOTOELECTRON
STEM
3
As stated above, the spectral response range is determined by the materials of the photocathode and the window as shown in Figure 34.It is important to select appropriate materials which will suit the application.
2.5 Luminous and blue sensitivity
Since the measurement of spectral response characteristics of a PMT requires a sophisticated system and time, it isn't practi-cal to provide spectral response data on each tube. Instead, cathode and anode luminous sensitivity data are usually attached.
The cathode luminous sensitivity is the photoelectric current from the photocathode per incident light flux (10-5 to 10-2 lumen) from a tungsten filament lamp operated at a distribution temperature of 2856 K.The cathode luminous sensitivity is expressed in the unit of μA/lm (micro amperes per lumen).Note that the lumen is a unit used for luminous flux in the visible region, therefore these values may be meaningless for tubes which are sensitive out of the visible region (refer to Figure 2).The cathode blue sensitivity is the photoelectric current from the photocathode per incident light flux of a tungsten filament lamp at 2856 K passing through a blue filter. Corning CS-5-58 filter which is polished to half stock thickness is used for the measurement of this sensitivity. This filter is a band-pass filter and its peak wavelength of transmittance is 400 nm.Since the light flux, once transmitted through the blue filter, can not be expressed in lumen, the blue sensitivity is usually repre-sented by the blue sensitivity index.The blue sensitivity is a very important parameter in the scintil-lation counting since most of the scintillators produce emission spectrum in the blue region, and it may dominant factor of energy resolution.These parameters of cathode luminous and blue sensitivities are particularly useful when comparing tubes having the same or similar spectral response ranges. Hamamatsu final test sheets accompanied with tubes usually indicate these parameters.
Figure 2: Typical human eye response and spectral distribution of 2856 K tungsten lamp
TPMOB0054EB
3. ELECTRON MULTIPLIER (DYNODES)
The superior sensitivity (high gain and high S/N ratio) of PMT is due to a low noise electron multiplier which amplifies electrons in a vaccum with cascade secondary emission process. The electron multiplier consists of several to up to 19 stages of electrodes which are called dynodes.
3.1 Dynode types
There are several principal types of dynode structures. Features of each type are as follows:
(1) Linear focused type
Fast time response, high pulse linearity
(2) Box and grid type
Good collection efficiency, good uniformity
(3) Box and linear focused type
Good collection efficiency, good uniformity, low profile
(4) Circular and linear-focused type
Fast time response, compactness
(5) Venetian blind type
Good uniformity, large output current
(6) Fine mesh type
High immunity to magnetic fields, good uniformity, high pulse linearity, position detection possible.
(7) Metal channel type
Compact dynode construction, fast time response, position detection possible.
4. ANODE
The PMT anode output is the product of photoelectric current from the photocathode and gain. Photoelectric current is proportional to the intensity of incident light. Gain is determined by the applied voltage on a specified voltage divider.
4.1 Luminous sensitivity
The anode luminous sensitivity is the anode output current per incident light flux (10-10 to 10-5 lumen) from a tungsten filament lamp operated at a distribution temperature of 2856 K. This is expressed in the unit of A/lm (amperes per lumen) at a speci-fied anode-to-cathode voltage with a specified voltage divider.
100
80
60
40
0
20
200 400 600 800 1000 1200 1400
WAVELENGTH (nm)
RE
LAT
IVE
VA
LUE
(%
)
VISUAL SENSITIVITY
TUNGSTEN LAMPAT 2856 K
4
5. ANODE DARK CURRENT
A small amount of output current flows in a PMT even when it is operated in complete darkness. This current is called the anode dark current. The dark current and the noise resulted from are critical factors to determine the lower limit of light detection.The causes of dark current may be categorized as follows:
(1) Thermionic emission of electrons
Since the materials of the photocathode and dynodes have very low work functions, they emit thermionic electrons even at the room temperature. Most of the dark current originates from the thermionic emissions especially from the photocathode, and it is multiplied by the dynodes.
(2) Ionization of residual gases
Residual gases inside the PMT can be ionized by the flow of photoelectrons. When these ions strike the photocathode or earlier stages of dynodes, secondary electrons may be emitted, thus resulting in relatively large output noise pulses. These noise pulses are usually observed as afterpulses follow-ing the primary signal pulses and may be a problem in detect-ing short light pulses. Present PMT's are designed to minimize afterpulses.
(3) Glass scintillation
In case electrons deviating from their normal trajectories strike the glass envelope, scintillations may occur and dark pulses may result. To eliminate these pulses, PMT's may be operated with the anode at high voltage and the cathode at the ground potential. Otherwise it is useful to coat the glass bulb with a conductive paint connected to the cathode (called HA treatment: see page 13).
(4) Ohmic leakage
Ohmic leakage resulting from insufficient insulation of the glass stem base and socket may be another source of dark current. This is predominant when a PMT is operated at a low voltage or low temperature.Contamination by dirt and humidity on the surface of the tube may cause ohmic leakage, and therefore should be avoided.
(5) Field emission
When a PMT is operated at a voltage near the maximum rating value, some electrons may be emitted from electrodes by strong electric fields causing dark pulses. It is therefore recom-mended that the tube be operated at 100 volts to 300 volts lower than the maximum rating.The anode dark current decreases along time after a PMT is placed in darkness. In this catalog, anode dark currents are specified as the state after 30 minutes storage in darkness.
4.2 Gain (Current amplification)
Photoelectrons emitted from a photocathode are accelerated by an electric field so as to strike the first dynode and produce secondary electron emissions. These secondary electrons then impinge upon the next dynode to produce additional secondary electron emissions. Repeating this process over successive dynode stages (cascade process), a high gain is achieved. Therefore a very small photoelectric current from the photo-cathode can be observed as a large output current from the anode of the PMT.Gain is simply the ratio of the anode output current to the photoelectric current from the photocathode. Ideally, the gain of the PMT is defined as δn, where n is the number of dynode stage and δ is an average secondary emission ratio.While the secondary electron emission ratio δ is given by
δ = A • Eα
where A is constant, E is an interstage voltage, and α is a coefficient determined by the dynode material and geometric structure. It usually has a value of 0.7 to 0.8.When a voltage V is applied between the cathode and the anode of the PMT having n dynode stages, gain G becomes
Figure 3 shows gain characteristics.Since generally PMTs have 8 to 12 dynode stages, the anode output varies directly with the 6th to 10th power of the change in applied voltage. The output signal of the PMT is extremely susceptible to fluctuations in the power supply voltage, thus the power supply should be very stable and exhibit minimum ripple, drift and temperature coefficient. Regulated high voltage power supplies designed with this consideration are available from Hamamatsu.
Figure 3: Example of gain vs. supply voltage
= δn = (A • Eα)n = A • n + 1
V α n{ }=
(n + 1)αnAn
Vαn = K • Vαn
( )G
(K: constant)
TPMOB0038EB104 109
200 300 500 700 1000 1500
AN
OD
E L
UM
INO
US
SE
NS
ITIV
ITY
(A
/lm)
SUPPLY VOLTAGE (V)
GA
IN
ANO
DE
SEN
SITI
VITY
GAI
N
108
107
106
105
104
103
103
102
101
100
10-1
10-2
5
6. TIME RESPONSE
In applications where forms of the incident light are pulses, the anode output signal should reproduce a waveform faithful to the incident pulse waveform.This reproducibility depends on the anode pulse time response.
(1) Rise time (refer to Figure 4)
The time for the anode output pulse to rise from 10 % to 90 % of the peak amplitude when the whole photocathode is illumi-nated by a delta-function light pulse.
(2) Electron transit time (refer to Figure 4)
The time interval between the arrival of a delta-function light pulse at the photocathode and the instant when the anode output pulse reaches its peak amplitude.
(3) T.T.S. (Transit Time Spread) (refer to Figure 5)
This is also called the transit time jitter. This is the fluctuation in transit time between individual pulses, and is defined as the FWHM of the frequency distribution of electron transit times. T.T.S. depends on the number of incident photons. The values in this catalog are measured in the single photoelectron state.
(4) C.R.T. (Coincident Resolving Time)
This is one of the important parameters in high energy physics applications and is defined as the FWHM of a coincident timing spectrum of a pair PMT's facing each other when they detect coincident gamma-ray emission due to positron annihilation of a radiation source (22Na). The scintillators used are CsF, BGO or BaF2 crystals. These PMT's can be selected for special requirements.
Figure 4: Definition of rise time and transit time
Figure 5: Definition of T.T.S.
These parameters are affected by the dynode structure and applied voltage. In general, PMTs of the linear focused struc-ture exhibit better time response than that of the box-and-grid or venetian blind structure.
Figure 6 shows typical time response characteristics vs. applied voltage for types R2059 (51 mm dia. head-on, 12-stage, linear-focused type).
Figure 6: Time response characteristics vs. supply voltage
TPMOB0059EB
7. PULSE LINEARITY
The definition of the pulse linearity is proportionality between the input light amount and the output current in the pulse operation mode. When intense light pulses are to be measured, it's necessary to know the pulse linearity range of the PMT.In this catalog, typical values of pulse linearity are specified at two points (±2 % and ±5 % deviations from linear proportional-ity), as shown in Figure 7.The two-pulse technique is employed in this measurement. LED's are used for a pulsed light source. Its pulse width is 50 ns and the repetition rate is 1 kHz.The deviation from the proportionality is called non-linearity in this catalog. The cause of non-linearity is mainly a space charge effect in the later stages of an electron multiplier. This space charge effect depends on the pulse height of the PMT output current and the strength of electric fields between electrodes.
500 1000 1500 2000 30002500
SUPPLY VOLTAGE (V)
TIM
E (
ns)
TYPE NO.: R2059
T.T.S.
RISE TIME
TRANSIT TIME
102
101
100
TPMOC0041EA
TPMOC0042EA
DELTA-FUNCTIONLIGHT PULSE AT PHOTOCATHODE
RISE TIME
TRANSIT TIMETt
90 %
10 %
Tt
FWHM=T.T.S.
TIME
FR
EQ
UE
NC
Y
Tt
6
9. STABILITY
In scintillation counting, there are two relevant stability charac-teristics for the PMT in pulse height mode operation, the long term and the short term. In each case a 137Cs source (662 keV), and an NaI(Tl) scintillator, and a multichannel pulse height analyzer are used. PMT's are warmed up for about one hour in the dark with voltage applied.
9.1 Long term stability (Mean gain deviation)
This is defined as follows when the PMT is operated for 16 hours at a constant count rate of 1000 s-1:
where P is the mean pulse height averaged over n readings, Pi is the pulse height at the i-th reading, and n is the total number of readings.
9.2 Short term stability
This is the gain shift against count rate change. The tube is initially operated at about 10000 s-1. The photo-peak count rate is then decreased to approximately 1000 s-1 by increasing the distance between the 137Cs source and the scintillator coupled to the PMT.
9.3 Drift and life characteristics
While operating a photomultiplier tube continuously over a long period, anode output current of the photomultiplier tube may vary slightly with time, although operating conditions have not changed. This change is reffered to as drift or in the case where the operating time is 1000 hours to 10000 hours it is called life characteristics. Figure 9 shows typical life characteristics. Drift is primarily caused by damage to the last dynode by heavy electron bombardment. Therefore the use of lower anode current is desirable. When stability is of prime impor-tance, the use of average anode current of 1 μA or less is recommended.
8. UNIFORMITY
Although the focusing electrodes of a PMT are designed so that electrons emitted from the photocathode or dynodes are collected efficiently by the first or following dynodes, some electrons may deviate from their desired trajectories and collection efficiency is degraded. The collection efficiency varies with the position on the photocathode from which the photoelectrons are emitted, and influences the spatial unifor-mity of a photomultiplier tube. The spatial uniformity is also determined by the photocathode surface uniformity itself.PMTs especially designed for gamma camera applications have excellent spatial uniformity. Example of spatial uniformity is shown in Figure 8.
The special voltage distribution ratios are designed to achieve strong electric fields in the later stages of the electron multiplier. Some types are specified with these special voltage dividers.
Figure 7: Example of pulse linearity characteristic
Figure 8: Example of spatial uniformity
Figure 9: Examples of life characteristics
nDg =
nΣ
i =1P-Pi
P
100 • (%)
TPMHB0094ED
TPMHB0794EA
TPMHC0050EA
10
ANODE PEAK CURRENT (mA)
DE
VIA
TIO
N (
%)
2 %
5 %
0
-10
-20100 101 102 103
100
50
0
TOP VIEW OFPHOTOCATHODE
SE
NS
ITIV
ITY
(%
)
100 50 0
SENSITIVITY (%)
150
125
100
75
50
25
1 10 100
OPERATING TIME (h)
1000 100000
RE
LAT
IVE
AN
OD
E S
EN
SIT
IVIT
Y (
%)
TEST CONDITIONS SUPPLY VOLTAGE: 1000 V INITIAL CURRENT: 100 μA LIGHT SOURCE: TUNGSTEN LAMP TEMPERATURE: 25 °C NUMBER OF SAMPLES: 10
x
x + σ
x - σ
7
10. ENVIRONMENT
10.1 Temperature characteristics
The sensitivity of the PMT varies with the temperature. Figure 10 shows typical temperature coefficients of anode sensitivity around the room temperature for bialkali and high temp. bialkali photocathode types. In the ultraviolet to visible region, the temperature coefficient of sensitivity has a negative value, while it has a positive value near the longer wavelength cut-off.Since the temperature coefficient change is large near the longer wavelength cut-off, temperature control may be required in some applications.
10.2 Magnetic field
Most PMTs are affected by the presence of magnetic fields. Magnetic fields may deflect electrons from their normal trajec-tories and cause a loss of gain. The extent of the loss of gain depends on the type of the PMT and its orientation in the magnetic field. Figure 11 shows typical effects of magnetic fields on some types of PMTs. In general, a PMT having a long path from the photocathode to the first dynode are very sensi-tive to magnetic fields. Therefore head-on types, especially of large diameter, tend to be more adversely influenced by magnetic fields.When a PMT has to be operated in magnetic fields, it may be necessary to shield the PMT with a magnetic shield case. (Hamamatsu provides a variety of magnetic shield cases.)For example, the shield case, of which inner diameter is 60 mm and the thickness is 0.8 mm, can be used in a magnetic field of around 5 mT without satulation. If a magnetic field strength is more than 10 mT, the double shielding method is necessary for a conventional PMT, otherwise proximity mesh types should be used. The magnetic shielding factor is used to express the effect of a magnetic shield case. This is the ratio of the strength of the magnetic field outside the shield case or Hout, to that inside the shield case or Hin.
The magnetic shielding factor is determined by the permeability µ, the thickness t(mm) and inner diameter r(mm) of the shield case as follows.
It should be noted that the magnetic shielding effect decreases towards the edge of the shield case as shown in Figure 12. It is suggested to cover a PMT with a shield case longer than the PMT length by at least half the PMT diameter.
Figure 10: Typical temperature coefficients of anode sensitivity
TPMOB0036ED
Figure 11: Typical effects by magnetic fields perpendicular to tube axis
Figure 12: Edge effect of magnetic shield case
TPMOB0011EC
TPMOB0017EB
The proximity mesh made of non-magnetic material has been introduced as alternate dynodes in PMT's. These types (see page 24) exhibit much higher immunity to external magnetic fields than the conventional PMT's. Also triode and three types (see page 24) are useful for applications at high light intensi-ties.
-3 -2 -1 0 1 2 30.01
0.1
1.0
RE
LAT
IVE
OU
TP
UT
MAGNETIC FLUX DENSITY (mT)
51 mm dia.HEAD-ON TYPE BOX-AND-GRID TYPE DYNODE
19 mm dia.HEAD-ON TYPE LINEAR-FOCUSED TYPE DYNODE( )
( )
LONGER than rEDGE EFFECT
1000
100
10
1
t
L
r r
SH
IELD
ING
FA
CT
OR
(H
o/H
i)
2r PHOTOMULTIPLIER TUBE
HoutHin
3µt4r
=
1.5
1
0.5
0
-0.5
-1200 300 400 500 600 700 800
WAVELENGTH (nm)
AN
OD
E S
EN
SIT
IVIT
YT
EM
PE
RA
TU
RE
CO
EF
FIC
IEN
T (
% /
°C)
BIALKALI
HIGH TEMP. BIALKALI
8
11.1 Anode grounding and photocathode grounding
In order to eliminate the potential difference between the photomultiplier tube anode and external circuits such as an ammeter, and to facilitate the connection, the generally used technique for voltage divider circuits is to ground the anode and supply a high negative voltage (-HV) to the photocathode, as shown in Figure 14. This scheme provides the signal output in both DC and pulse operations, and is therefore used in a wide range of applications.
In photon counting and scintillation counting applications, however, the photomultiplier tube is often operated with the photocathode grounded and a high positive voltage (+HV) supplied to the anode mainly for purposes of noise reduction. This photocathode grounding scheme is shown in Figure 15, along with the coupling capacitor Cc for isolating the high voltage from the output circuit. Accordingly, this setup cannot provide a DC signal output and is only used in pulse output applications. The resistor RP is used to give a proper potential to the anode. The resistor RL is placed as a load resistor, but the actual load resistance will be the combination of RP and RL.
11. VOLTAGE DIVIDER CIRCUITS
To operate a photomultiplier tube, a high voltage of 500 volts to 2000 volts is usually supplied between the photocathode (K) and the anode (P), with a proper voltage gradient set up along the photoelectron focusing electrode (F) or grid (G), secondary electron multiplier electrodes or dynodes (Dy) and, depending on photomultiplier tube type, an accelerating electrode (Acc). Figure 13 shows a schematic representation of photomultiplier tube operation using independent multiple power supplies, but this is not a practical method. Instead, a voltage divider circuit is commonly used to divide, by means of resistors, a high voltage supplied from a single power supply.
Figure 13: Schematic representation of photomultiplier tube operation
Figure 14: Anode grounded voltage divider circuit
Figure 15: Photocathode grounded voltage divider circuitTACCC0055EA
Figure 14 shows a typical voltage divider circuit using resistors, with the anode side grounded. The capacitor C1 connected in parallel to the resistor R5 in the circuit is called a decoupling capacitor and improves the output linearity when the photomul-tiplier tube is used in pulse operation, and not necessarily used in providing DC output. In some applications, transistors or Zener diodes may be used in place of these resistors.
TACCC0056EB
TACCC0057EB
KLIGHT
F Dy1 Dy2 Dy3 P
V1 V2 V3 V4 V5
POWER SUPPLIES
ANODE CURRENTIp
A
e- e- e- e-
PHOTOELECTRONS
SECONDARY ELECTRONS
K F P
IpOUTPUT
Dy3Dy2Dy1
R1 R2 R3 R4 R5
RL
C1
-HV
K F P
Cc
IpOUTPUT
Dy3Dy2Dy1
R5
RLRP
C1
C2
+HV
R1 R2 R3 R4
9
Figure 16: Equally divided voltage divider circuit
Figure 17: Tapered voltage divider circuit
Figure 18: Output linearity of photomultiplier tube
Figure 19: Basic operation of photomultiplier tubeand voltage divider circuit
11.2 Standard voltage divider circuits
Basically, the voltage divider circuits of socket assemblies listed in this catalog are designed for standard voltage distribu-tion ratios which are suited for constant light measurement. Socket assemblies for side-on photomultiplier tubes in particu-lar mostly use a voltage divider circuit with equal interstage voltages allowing high gain as shown in Figure 16.
11.4 Voltage divider circuit and photomultiplier tube output linearity
In both DC and pulse operations, when the light incident on the photocathode increases to a certain level, the relationship between the incident light level and the output current begins to deviate from the ideal linearity. As can be seen from Figure 18, region A maintains good linearity, and region B is the so-called overlinearity range in which the output increase is larger than the ideal level. In region C, the output goes into saturation and becomes smaller than the ideal level. When accurate measure-ment with good linearity is essential, the maximum output current must be within region A. In contrast, the lower limit of the output current is determined by the dark current and noise of the photomultiplier tube as well as the leakage current and noise of the external circuit.
11.5 Output linearity in DC mode
Figure 19 is a simplified representation showing photomultiplier tube operation in the DC output mode, with three stages of dynodes and four dividing resistors R1 through R4 having the same resistance value.
11.3 Tapered voltage divider circuits
In most pulsed light measurement applications, it is often necessary to enhance the voltage gradient at the first and/or last few stages of the voltage divider circuit, by using larger resistances as shown in Figure 17. This is called a tapered voltage divider circuit and is effective in improving various characteristics. However it should be noted that the overall gain decreases as the voltage gradient becomes greater. In addition, care is required regarding the interstage voltage tolerance of the photomultiplier tube as higher voltage is supplied. The tapered voltage circuit types and their suitable applications are listed below.
TACCC0058EB
Tapered circuit at the first few stages (resistance: large <First dynode> / small <Latter dynode>)
Photon counting (improvement in pulse height distribution)Low-light-level detection (S/N ratio enhancement)High-speed pulsed light detection (improvement in timing properties)Other applications requiring better magnetic characteristics and uniformity
Tapered circuit at the last few stages (resistance: small <First dynode> / large <Latter dynode>)
High pulsed light detection (improvement in output linearity)High-speed pulsed light detection (improvement in timing properties)Other applications requiring high output across the load resistor
TACCC0059EB
TACCB0005EB
TACCC0060EA
OUTPUT
PDy5Dy4K Dy3Dy2Dy1
RL
-HV
3R2R1R1R1.5R2R
C1 C2
P
OUTPUT
Dy5Dy4K Dy3Dy2Dy1
RL
-HV
C1
1R 1R 1R 1R 1R 1R
C2
0.001
0.01
0.1
1.0
10
0.001 0.01 0.1 1.0 10
A
B
C
RA
TIO
OF
OU
TP
UT
CU
RR
EN
TT
O D
IVID
ER
CU
RR
EN
T
LIGHT FLUX (A.U.)
ACTUALCURVE
IDEALCURVE
K Dy1 Dy2 Dy3 P
R1 R2 R3
-HV
Ip
R4
A
IR1 IR2 IR3 IR4
ID
IDy1 IDy2 IDy3IK
I1I2 I3
I4
10
Figure 22: Changes in interstage voltages at differentincident light levels
Figure 21: Operation with light input
TACCC0062EA
Figure 22 shows changes in the interstage voltages as the incident light level varies. The interstage voltage V4' with light input drops significantly compared to V4 in dark state opera-tion. This voltage loss is redistributed to the other stages, resulting an increases in V1', V2' and V3' which are higher than those in dark state operation. The interstage voltage V4' is only required to collect the secondary electrons emitted from the last dynode to the anode, so it has little effect on the anode current even if dropped to 20 or 30 volts. In contrast, the increases in V1', V2' and V3' directly raise the secondary emission ratios (δ1, δ2 and δ3) at the dynodes Dy1, Dy2 and Dy3, and thus boost the overall gain m (= δ1 • δ2 • δ3 ). This is the cause of overlinearity in region B in Figure 10. As the incident light level further increases so that V4' approaches 0 volts, output saturation occurs in region C.
TACCB0017EA
Where In' is the interelectrode current which has the following relation:
I1' < I2' < I3' < I4'
Thus, the interstage voltage Vn' (=IRn' • Rn) becomes smaller at the latter stages, as follows:
V1' > V2' > V3' > V4'
Figure 20: Operation without Light Input
[When light is not incident on the tube]In dark state operation where a high voltage is supplied to a photomultiplier tube without incident light, the current compo-nents flowing through the voltage divider circuit will be similar to those shown in Figure 20 (if we ignore the photomultiplier tube dark current). The relation of current and voltage through each component is given below
Interelectrode current of photomultiplier tube
I1=I2=I3=I4 (= 0 A)
Electrode current of photomultiplier tube
IK=IDy1=IDy2=IDy3=IP (= 0 A)
Voltage divider circuit current
IR1=IR2=IR3=IR4=ID= (HV/ Rn)
Voltage divider circuit voltage
V1=V2=V3=V4=ID • Rn (= HV/4)
[When light is incident on the tube]When light is allowed to strike the photomultiplier tube under the conditions in Figure 20, the resulting currents can be considered to flow through the photomultiplier tube and the voltage divider circuit as schematically illustrated in Figure 21. Here, all symbols used to represent the current and voltage are expressed with a prime ( ' ), to distinguish them from those in dark state operation.The voltage divider circuit current ID' is the sum of the voltage divider circuit current ID in dark state operation and the current flowing through the photomultiplier tube ΔID (equal to average interelectrode current). The current flowing through each dividing resistor Rn becomes as follows:
IRn' = ID' - In'
Σn=1
4
TACCC0061EAID
V1 V2 V3 V4
R1 R2 R3 R4
IR1 IR2 IR3 IR4
I1 (=IK) I2 I3 I4 (=IP)K Dy1 Dy2 Dy3 P
-HV
IK IDy1 IDy2 IDy3 IP
ID' =ID + ΔID
V1' V2' V3' V4'
IR1' IR2' IR3' IR4'
I1' (=IK') I2' I3'I4' (=IP')
Ik' IDy1' IDy2' IDy3' IP'
R1 R2 R3 R4
K Dy1 Dy2 Dy3 P
-HV
80
90
100
110
120
V1 V2 V3 V4
POSITION OF INTERSTAGE VOLTAGE
INT
ER
ST
AG
E V
OLT
AG
E (
%)
HIGH LIGHT INPUT
MODERATE LIGHT INPUT
NO OR FAINT LIGHT INPUT
11
Figure 24: Active voltage divider circuit
Figure 25: Voltage divider circuit using zener diodes
Figure 23: Output linearity vs. anode current tovoltage divider current ratio
11.6 Linearity improvement in DC output mode
To improve the linearity in DC output mode, it is important to minimize the changes in the interstage voltage when photocur-rent flows through the photomultiplier tube. There are several specific methods for improving the linearity, as discussed below.
TACCB0031EA
2Using the active voltage divider circuitUse of a voltage divider circuit having transistors in place of the dividing resistors in last few stages (for example, Hamamatsu E6270 series using FETs) is effective in improving the output linearity. This type of voltage divider circuit ensures good linearity up to an output current equal to 60 % to 70 % of the voltage divider current, since the interstage voltage is not affected by the interelectrode current inside the photomultiplier tube. A typical active voltage divider circuit is shown in Figure 24.
As stated above, good output linearity can be obtained simply by increasing the voltage divider current. However, this is accompanied by heat emanating from the voltage divider. If this heat is conducted to the photomultiplier tube, it may cause problems such as an increase in the dark current, and variation in the output.
TACCC0063EA
3Using zener diodesThe output linearity can be improved by using Zener diodes in place of the dividing resistors in the last few stages, because the Zener diodes serve to maintain the interstage voltages at a constant level. However, if the supply voltage is greatly varied, the voltage distribution may be imbalanced compared to other interstage voltages, thus limiting the adjustable range of the voltage with this technique. In addition, if the supply voltage is reduced or if the current flowing through the Zener diodes becomes insufficient due to an increase in the anode current, noise may be generated from the Zener diodes. Precautions should be taken when using this type of voltage divider circuit. Figure 25 shows a typical voltage divider circuit using Zener diodes.
TACCC0064EA
1Increasing the voltage divider currentFigure 23 shows the relationship between the output linearity of a 28 mm (1-1/8") diameter side-on photomultiplier tube and the ratio of anode current to voltage divider current. For exam-ple, to obtain an output linearity of 1 %, it can be seen from the figure that the anode current should be set approximately 1.4 % of the divider circuit current. However, this is a calculated plot, so actual data may differ from tube to tube even for the same type of photomultiplier tube, depending on the supply voltage and individual dynode gains. To ensure high photomet-ric accuracy, it is recommended that the voltage divider current be maintained at least twice the value obtained from this figure.
The maximum linear output in DC mode listed for the D-type socket assemblies in this catalog indicates the anode current equal to 1/20 of the voltage divider current. The output linearity at this point can be maintained within 3 % to 5 %.
RATIO OF ANODE CURRENT TO VOLTAGE DIVIDER CURRENT (%)
OU
TP
UT
LIN
EA
RIT
Y (
%)
0.01
10
0.1
1
0.1 101
K P
-HV
TWOTRANSISTORS
RL
Dy1 Dy2 Dy3 Dy4 Dy5
K Dy1 Dy2 Dy3
-HV
Dy4 Dy5
TWOZENER DIODES
RL
P
12
Figure 28: Equally divided voltage divider circuit anddecoupling capacitors
TACCC0067EB
11.7 Output linearity in pulsed mode
In applications such as scintillation counting where the incident light is in the form of pulses, individual pulses may range from a few to over 100 milliamperes even though the average anode current is small at low count rates. In this pulsed output mode, the peak current in extreme cases may reach a level hundreds of times higher than the voltage divider current. If this happens, it is not possible to supply interelectrode currents from the voltage divider circuit to the last few stages of the photomulti-plier tube, thus leading to degradation in the output linearity.
11.8 Improving linearity in pulsed output mode
1Using decoupling capacitorsUsing multiple power supplies mentioned above is not popular in view of the cost. The most commonly used technique is to supply the interelectrode current by using decoupling capaci-tors as shown in Figure 28. There are two methods for connecting these decoupling capacitors: the serial method and the parallel method. As Figures 28 and 29 show, the serial method is more widely used since it requires lower tolerance voltages of the capacitors. The capacitance value C (farads) of the decoupling capacitor between the last dynode and the anode should be at least 100 times the output charge as follows:
C > 100 • Q/V
where Q is the charge of one output pulse (coulombs) and V is the voltage (volts) across the last dynode and the anode.
Since this method directly supplies the pulse current with electrical charges from the capacitors, if the count rate is increased and the resulting duty factor becomes larger, the electrical charge will be insufficient. Therefore, in order to maintain good linearity, the capacitance value obtained from the above equation must be increased according to the duty factor, so that the voltage divider current is kept at least 50 times larger than the average anode current just as with the DC output mode.The active voltage divider circuit and the booster method using multiple power supplies discussed previously, provide superior pulse output linearity even at a higher duty factor.
Figure 27: Voltage divider circuit using multiple powersupplies (Booster method)
5Using multiple high voltage power suppliesAs shown in Figure 27, this technique uses multiple power supplies to directly supply voltages to the last few stages near the anode. This is sometimes called the booster method, and is used for high pulse and high count rate applications in high energy physics experiments.
TACCC0066EA
Figure 26: Cockcroft-Walton circuit
4Using Cockcroft-Walton circuitWhen a Cockcroft-Walton circuit as shown in Figure 26 is used to operate a 28 mm (1-1/8") diameter side-on photomultiplier tube with a supply voltage of 1000 volts, good DC linearity can be obtained up to 200 µA and even higher. Since a high voltage is generated by supplying a low voltage to the oscillator circuit, there is no need for using a high voltage power supply.This Cockcroft-Walton circuit achieves superior DC output linearity as well as low current consumption.
TACCC0065EA
-HV GENERATED
K Dy1 Dy2 Dy3 Dy4 Dy5 P
OSCILLATIONCIRCUIT
RL
K
RL
PDy1 Dy2 Dy3 Dy4 Dy5
AUXILIARY POWER SUPPLY 1
MAIN POWER SUPPLY
AUXILIARYPOWER SUPPLY 2
K Dy1 Dy2 Dy3
-HV
Dy4 Dy5
RL
P
1R 1R 1R 1R 1R
CD2CD1
1R
TWO DECOUPLING CAPACITORS
13
Figure 29: Tapered voltage divider circuit usingdecoupling capacitors
12. EXTERNAL POTENTIAL
If the input window or glass envelope near the photocathode is grounded, slight conductivity of glass material causes a current flow between the photocathode, which has a high negative potential, and ground.This may cause electrolysis of photocathode, leading to signifi-cant deterioration.Also this may cause noise resulted from the light flashes at the above input window or glass envelope.For those reasons, when designing a PMT housing with an electrostatic or magnetic shield case, extreme care should be required.When the anode ground scheme is used, bringing a grounded metallic holder or magnetic shield case near the glass enve-lope of PMT can cause electrons to strike the inner glass wall, resulting in the noise.This problem can be solved by applying a black conductive paint around the glass envelope and connecting it to the cathode potential. Then PMT is wrapped with an insulating black cover, as shown in Figure 30. This method is called HA treatment.
2Using tapered voltage divider circuit with decoupling capacitors
Use of the above voltage divider circuit having decoupling capacitors is effective in improving pulse linearity. However, when the pulse current increases further, the electron density also increases, particularly in last stages. This may cause a space charge effect which prevents interelectrode current from flowing adequately and leading to output saturation. A commonly used technique for extracting a higher pulse current is the tapered voltage divider circuit in which the voltage distribution ratios in the latter stages are enhanced as shown in Figure 29. Care should be taken in this case regarding loss of the gain and the breakdown voltages between electrodes.Since use of a tapered voltage divider circuit allows an increase in the voltage between the last dynode and the anode, it is possible to raise the voltage across the load resistor when it is connected to the anode. It should be noted however, that if the output voltage becomes excessively high, the voltage between the last dynode and the anode may drop, causing a degradation in output linearity.
TACCC0068EB
13. SCINTILLATION COUNTING
13.1 General
Scintillation counting is one of the most common and effective methods in detecting radiation particles. It uses a PMT coupled to a scintillator which produces light by incidence of radiation particles.In radiation particle measurement, there are two parameters that should be measured. One is the energy of individual particle and the other is the amount of particles. When radia-tion particles enter the scintillator, they produce light flashes in response to each particle. The amount of flash is proportional to the energy of the incident particle and individual light flashes are detected by the PMT. Consequently, the output pulses obtained from the PMT contain information on both the energy and number of pulses, as shown in Figure 31.
Figure 30: HA treatment
TPMHC0049EB
Figure 31: Incident particles and PMT output
TPMOC0039EA
K Dy1 Dy2 Dy3
-HV
Dy4 Dy5
RL
P
1R 1R 1R 1.5R 3R
CD2CD1
2.5R
TWO DECOUPLING CAPACITORS
INSULATING BLACK COVER
CONDUCTIVE PAINT CONNECTED TOCATHODE PIN
SCINTILLATOR
PMT
THE HEIGHT OF OUTPUTPULSE IS PROPORTIONALTO THE ENERGY OF INCIDENT PARTICLE.
TIME
CU
RR
EN
T
TIME
14
To obtain a good energy resolution, it is important to use a good scintillator having a high efficiency and a good intrinsic energy resolution. It is also important to reduce a light loss between a PMT and a scintillator. For this purpose, it is useful to couple them with silicon oil having a refractive index close to that of the faceplate window of the PMT or scintillator material or its protective window.
The following factors determin the energy resolution.
(1) Energy conversion efficiency of the scintillator(2) Intrinsic energy resolution of the scintillator(3) Quantum efficiency of the photocathode(4) Collection efficiency of photoelectrons at the first dynode(5) Secondary emission yield of dynodes (especially first
dynode)
The equation of the pulse height resolution is described as follows:
R(E)2 = RS(E)2 + RP(E)2
where R(E) : energy resolution RS(E) : energy resolution of a scintillator RP(E) : energy resolution of a PMT
Figure 33: Definition of pulse height resolution
RP(E)2 is described as follows:
where N : mean number of incident photon η : quantum efficiency α : collection efficiency δ : mean secondary emission yield of each dynode
Nηα
2.352RP(E)2 = ×
δ – 1δ
TPMOB0088EA
By analyzing these output pulses using a multichannel analyzer (MCA), pulse height distribution (PHD), or energy spectra, as shown in Figure 32, are obtained. From the PHD, the number of incident particles at various energy levels can be measured.
13.2 Energy resolution
For the energy spectrum measurement, it is very important to have a distinct peak at each energy level. This characteristic is evaluated as the pulse height resolution or the energy resolution and is most significant in the radiation particle identification.Figure 33 shows the definition of the energy resolution using NaI(Tl) scintillator and 137Cs γ-ray source. It is customarily stated as a percentage.
Figure 32: Typical pulse height distribution (Energy spectral)
(a) 55Fe+Nal(TI)
(b) 137Cs+Nal(TI)
(c) 60Co+Nal(TI)
TPMOB0087EC
1000
500
5000 1000
10000
5000
(51 mm dia. × 51 mm t)
5000 1000
10000
5000
500
ENERGY
CO
UN
TS
ENERGY
ENERGY
CO
UN
TS
CO
UN
TS
0 1000
(51 mm dia. × 51 mm t)
PULSE HEIGHT
NU
MB
ER
OF
PU
LSE
S
ab
b
aH
H2
Energy Resolution (FWHM) =—× 100 %
15
13.3 Emission spectrum of scintillator
The quantum efficiency of the PMT is one of the main factors to determine its energy resolution. It is necessary to choose a PMT whose spectral response matches the scintillator emission. Figure 34 shows PMT typical spectral response vs. emission spectra of scintillators. For NaI(Tl), which is the most popular scintillator, bialkali photocathode PMTs are widely used.
Figure 34: Typical spectral response and emission spectra of scintillators
TPMHB0342EE
13.4 Features of scintillators
Figure 35 shows typical temperature responses of various scintillators. These characteristics should be considered in the actual operation.Table 1 shows a summary of scintillator characteristics.These data are reported by scintillator manufactures.
Figure 35: Typical temperature response of various scintillators
TPMOB0033EA
Table 1: Summary of scintillator characteristics
Density (g/cm3)
Lrad (cm)
Refractive index
Hygroscopic
Luminescence (nm)
Decay time (ns)
Relative light output
3.67
2.59
1.85
Yes
410
230
100
7.13
1.12
2.15
No
480
300
15
4.51
1.85
1.80
Slightly
530
1000
45 to 50
4.51
1.85
1.80
Slightly
310
10
<10
4.88
2.10
1.58
Slightly
220 / 325
0.9 / 630
20
6.71
1.38
1.85
No
430
30
20
1.03
40
1.58
No
400
2.0
25
7.35
0.88
1.82
No
420
40
70
5.29
2.1
1.9
Yes
380
16
165
5.55
2.70
1.97
No
380
30
40
Nal(Tl) BGO Csl(Tl) Pure Csl BaF2 GSO: Ce Plastic LSO: CeLaBr3: Ce YAP: Ce
-100
CsI (Tl)
-60 -20 0 +20 +60 +100 +140
100
SCINTILLATOR TEMPERATURE (°C)
BGO
RE
LAT
IVE
LIG
HT
OU
TP
UT
(%
)
Pure CsI
80
40
60
20
NaI (Tl)
A: Bialkali Photocathode (Borosilicate Glass)B: Bialkali Photocathode (UV Glass)C: Bialkali Photocathode (Silica Glass)D: Bialkali PhotocathodeE: High Temp. Bialkali PhotocathodeF: Super BialkaliG: Ultra BialkaliH: Extended Green BialkaliI: Low Temp. (down to -110 °C) Bialkali PhotocathodeJ: Low Temp. (down to -186 °C) Bialkali Photocathode
0
100
WAVELENGTH (nm)
QU
AN
TU
M E
FF
ICIE
NC
Y (
%)
8060
40
20
100.1
RE
LAT
IVE
INT
EN
SIT
Y (
%)
100
10
1
700100 200 300 400 500 600
BaF2
LaBr3
Nal (Tl)
LSOCsI (Tl)
BGO
D
G
H
A
BE
C
I F
J
16
As the metal channel dynode is a sort of an array of small linear focused dynodes, secondary electrons hardly go to the adjacent dynode channel in a process of multiplication. It is possible to make multi-anode PMTs utilizing this feature. These anode shapes are categorized into 5 groups. The first group is multianode in matrix. 4 (2 × 2), 16 (4 × 4) and 64 (8 × 8) matrix channels types are available. (see Figure 38-A) Those are suitable for scintillating fiber readout as well as RICH (Ring Image CHerenkov counter). The second group is linear anode. 16 (1 × 16) and 32 (1 × 32) linear channels types are available. (see Figure 38-B) Those are suitable for coupling with slit shape scintillators and ribbon-shaped scintillating fiber bundle.R11265 series are wider effective area and shorter length compare with those of R7600 series. Those are also offering matrix channel type as well as single channel type (see Figure 38-C).Flat panel PMT assemblies use a 52 mm square photomulti-plier tube having an effective area ratio of 89 % and a 64-channel or 256-channel multianode. These flat panel PMTs offer a wide photosensitive area and come in thin, compact shape (see Figure 38-D). These PMTs can be efficiently arrayed in rows or matrices with almost no unused space between them. (See figure 38-E)
14. METAL PACKAGE PHOTOMULTIPLIER TUBE
In general including, the development of more compact and portable equipment has continuously progressed. This has led to a strong demand for miniaturization of highly sensitive photodetectors like PMTs. However, it is difficult to miniaturize conventional PMTs with glass envelopes and sophisticated electrode structures.Accordingly, PMTs have been mainly used in high-precision photometric systems, while semiconductor sensors have been used in general purpose, compact and portable equipments/ applications. To meet the increasing needs for small photode-tectors with high sensitivity, Hamamatsu has developed subminiature PMTs (R9880 series) using a metal package in place of the traditional glass envelope. These tubes have a size as small as semiconductor sensors, without sacrificing high sensitivity, and have the high speed response offered by conventional PMTs. The remarkable features of R9880 series are: smallest size, fast time response, ability of low light level detection and good immunity to magnetic fields.R9880 series are a subminiature PMT that incorporates an eight stages electron multiplier constructed with stacked thin electrodes (metal channel dynode) into a TO-8 type metal can package of 15 mm in diameter and 10 mm in height. The development of this metal package and its unique thin electrodes have made the fabrication of this subminiature PMT possible. The electrode structure of the electron multiplier was designed by means of advanced computer simulation and electron trajectory analysis. Furthermore, our long experience with micromachining technol-ogy has achieved a closed proximity assembly of these thin electrodes. Figure 36 shows a cross section of the metal chan-nel dynode with simulated electron trajectories.
The R5900 / R7600 / R8520 / R11265 series is another version of metal package PMT. It incorporates 10 to 12 stages of metal channel dynodes into a metal package of 26 mm × 26 mm square and about 20 mm in height. The prime features are similar to those of R9880 series, but its effective area is differ-ent of R9880. The dimensional outline of R11265U is shown in Figure 37. In this figure, "U" means a tube having an insulation plastic cover. It is necessary to prevent electric shock with some insulation material, because a metal package has a cathode potential voltage.
Figure 36: Cross section of metal channel dynode with electron trajectories
Figure 37: Insulation plastic cover of R11265U
TPMHA0585EA
TPMHC0101EA
30.0 ± 0.5
23 MIN.
26.2+0 -0.5
12.0
± 0
.5
19-
0.4
5
4.2 MAX.
0.6 ± 0.4
18.7 ± 0.5 3.5 ± 0.7
PHOTOCATHODEEFFECTIVE AREA
2.22
PIT
CH
22.95
22.56
SIDE VIEW BOTTOM VIEWTOP VIEW
e e
17
(A) Matrix channel type
Figure 38: Various anode shape
(B) Linear channel type
(C) R11265 series
(D) Flat panel type
(E) Flat panel PMT array
TPMHC0204EC
THBV3_1309EA
THBV3_1310EAb
15. FINE MESH PHOTOMULTIPLIER TUBE
As indicated in section 10.2, normal photomultiplier tubes exhibit a large variation in a magnetic field, for example, sensi-tivity reduces at least one order of magnitude in a magnetic field of 10 milliteslas. In high-energy physics applications, however, photomultiplier tubes capable of operating in a magnetic field of more than one tesla are demanded. To meet these demands, special photomultiplier tubes with fine-mesh dynodes have been developed and put into use. 1) The struc-ture of this photomultiplier tube is illustrated in Figure 39. Figure 40 shows current relative output of a 19-stage photo-multiplier tube versus magnetic field at different angles.
Figure 39: Structure of a photomultiplier tube designed for use in highly magnetic fields
Figure 40: Magnetic characteristics of photomultiplier tubes for highly magnetic fields
H8711(R7600-00-M16)
H7546B(R7600-00-M64)
R7600U-00-M4
H13700(R12699-00-M256)
H12700A(R12699-00-M64)
H7260(R7259)
R5900U-00-L16
* R5900 series has flange at the bottom of the metal package, whereas R7600 series doesn't have it.
R11265U-00-M4 R11265-00-M16 R11265-00-M64R11265U
* R11265 series have wider effective area and low profile with those of R7600 series.
H13974-00-1616
8 × 8 8 × 8
8 × 8 8 × 8
− −
− −
−−
−
−
ELECTRON ELECTRONFINE MESHDYNODE
0 0.25 0.50 0.75 1.0 1.25 1.510-3
10-2
10-1
100
101
MAGNETIC FLUX DENSITY (T)
RE
LAT
IVE
OU
TP
UT
SUPPLY VOLTAGE: 2000 V
30 °
0 °
θ
MAGNETIC FLUX DIRECTION
ANODE
INPUTWINDOW
PHOTOCATHODE HA TREATMENT
PIN BASE orSEMIFLEXIBLE LEADS
DYNODE
18
List guide for photomultiplier tubes
q Outline No.
This number corresponds to that of PMT dimensional outline drawing shown on later pages.Basing diagram symbols are explained as follows:
w Spectral response
The relationship between photocathode sensitivity and wave-length of input light.Curve code corresponds to that of spectral response curve on the inside back cover.(Refer to section 2 on page 2 for further details.)
e QE (Quantum Efficiency)
The ratio of the number of photoelectrons emitted from the photocathode to the number of incident photons.This catalog shows quantum efficiency at the peak wavelength.(Refer to section 2.2 on page 2 for further details.)
r Cathode sensitivity (Luminous)
The photoelectric current from the photocathode per incident light flux from a tungsten filament lamp operated at 2856 K.(Refer to section 2.5 on page 3 for further details.)
t Cathode blue sensitivity index
The photoelectric current from the photocathode per incident light flux from a tungsten filament lamp operated at 2856 K passing through a blue filter which is Corning CS 5-58 polished to 1/2 stock thickness.(Refer to section 2.5 on page 3 for further details.)
y Radiant
Measured at the peak sensitivity wavelength.(Refer to section 2.2 on page 2 for further details.)
u Anode to cathode supply voltage
The voltage indicates a standard applied voltage used to measure characteristics. The number in circles corresponds to that of the voltage distribution ratio on page 56 and 57.
i Anode sensitivity (Luminous)
The output current from the anode per incident light flux from a tungsten filament lamp operated at 2856 K.(Refer to section 4.1 on page 3 for further details.)
o Gain (Current amplification)
The ratio of the anode output current to the photoelectric current from the photocathode.(Refer to section 4.2 on page 4 for further details.)
!0 Anode dark current
The output current from the anode measured after 30 minutes storage in complete darkness.(Refer to section 5 on page 4 for further details.)
!1 Time response
<Rise time>The time for the anode output pulse to rise from 10 % to 90 % of the peak amplitude.
<Electron transit time>The time interval between the arrival of a delta function light pulse at the photocathode and the instant when the anode output pulse reaches its peak amplitude.
<T.T.S. (Transit Time Spread)>This is the fluctuation in transit time among individual pulses, and is defined as the FWHM of the frequency distribution of transit time.(Refer to section 6 on page 5 for further details.)
TPMOC0068EC
Tubediameter
TypeNo.
Out-lineNo.
Spectral response Cathode characteristics Anode characteristics
Spectralresponse
range
Q.E.at peakTyp.
Curvecode
(nm) (%)
Lumi-nousTyp.
Bluesensitivityindex
(CS 5-58)Typ.
RadiantTyp.
RadiantTyp.
(µA/lm) (mA/W) (A/W)
Lumi-nousTyp.
GainTyp.
(A/lm)
Typ.
(nA)
Max.
(nA)
RisetimeTyp.(ns)
TransittimeTyp.(ns)
T.T.S.Typ.
(FWHM)(ns)
Dark current Time responseAnode tocathodesupplyvoltage
(V)
q w
e r t iuy y o !0 !1
: Dynode: Grid (Focusing Electrode): Accelerating Electrode: Photocathode: Anode: Shield: Internal Connection (Do not use)
DYG(F)ACCKPSHIC
Short IndexPin
SemiflexibleLead
Key
Pin
BASING DIAGRAM SYMBOLSAll base diagrams show terminals viewed from the base end of the tube.
19
!2 Maximum rating
<Anode to cathode voltage>The maximum anode to cathode voltages are limited by the internal structure of the PMT.Excessive voltage causes electrical breakdown. The voltage lower than the maximum rating should be applied to the PMT.
<Average anode current>This indicates the maximum averaged current over any interval of 30 seconds. For practical use, operating at lower average anode current is recommended.(Refer to section 9.3 on page 6 for further details)
★Operating ambient temperature range for the photomultiplier itself is -30 °C to +50 °C except for some types of tubes.However, when photomultiplier tubes are operated below -30 ° C at their base section, please consult us in advance.
!3 Pulse height resolution (P.H.R.)
The P.H.R. is measured with the combination of an NaI(Tl) scintillator and a 137Cs source as a standard measurement. If other scintillators or γ-ray sources are used, note is attached.(Refer to section 13.2 on page 14 for further details.)
!4 Stability
<Long term stability (Mean gain deviation)>This is defined as follows under the operation for 16 hours at a constant count rate of 1000 s-1:
where P is the mean pulse height averaged over n readings, Pi is the pulse height at the i-th reading, and n is the total number of readings.
<Short term stability>This is the gain shift on count rate charge. The tube is first operated at about 10000 s-1. The photo-peak count rate is then decreased to about 1000 s-1 by increasing the distance between the 137Cs source and the tube coupled to the NaI(Tl) scintillator.(Refer to section 9 on page 6 for further details.)
!5 Pulse linearity
Typical values of pulse linearity are specified at two points (±2 % and ±5 % deviation points from linear proportionality).(Refer to section 7 on page 5 and 6 for further details.)
!6 Dynode
<Dynode structure>Each mark means dynode structure as follows:
LINE : linear focusedBOX : box and gridB + L : box and linear focusedC + L : circular and linear focusedVB : venetian blindFM : fine meshMC : metal channel
<No. of stages>The number of dynodes used.(Refer to section 3 on page 4 for further details.)
!7 Socket & socket assembly
★ mark : A socket will be supplied with a PMT.no mark : A socket will be supplied as an option.The number in square corresponds to the outline number of the PMT socket assembly on page 58 and 59.
nDg =
nΣ
i =1P-Pi
P
100 • (%)
(at 25 °C)
TypeNo.
Note
StabirityMax. ratings RemarksPulse linearity
(%)
5 %deviation
Typ.
Dynodestructure/ stage
(mA)
2 %deviation
Typ.
(mA)
ShorttermTyp.
(%)
LongtermTyp.
(%)
Averageanodecurrent
(mA)
Anodeto
cathodevoltage
(V)
!2 !3 !4 !5
!6 !7Typicalpulseheight
resolution
Socket&
socketassembly
20
Photomultiplier tubes
A-D
C-D
A-D
A-D
A-E
A-D
H
A-D
A-D
A-D
A-E
A-D
A-D
A-E
A-D
A-D
A-D
A-D
A-D
F
A-D
A-D
F
A-D
A-D
A-D
A-D
A-D
A-D
A-D
A-D
F
A-D
300 to 650
160 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 700
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
100
100
110
100
30
110
160
110
115
115
30
115
90
30
90
80
95
95
95
130
95
90
130
100
90
95
95
95
120
90
95
130
95
10.0
10.0
10.0
10.0
4.5
10
14
10.5
11.0
11.0
4.5
11.0
10.5
4.5
10.5
9.5
11.0
11.0
11.0
13.5
10.0
10.5
13.5
11.0
10.5
11.0
10.0
11.0
11.5
10.5
11.0
13.5
10.0
80
80
80
80
38
80
105
85
88
88
38
88
85
38
85
76
88
88
88
110
80
85
110
88
85
88
80
88
89
85
88
110
80
25
25
25
25
12
25
32
26
27
27
12
27
26
12
26
23
27
27
27
35
25
26
35
27
26
27
25
27
28
26
27
35
25
1.0 × 106
1.0 × 106
1.4 × 106
1.0 × 106
5.0 × 105
2.0 × 106
2.0 × 106
1.0 × 106
1.7 × 106
1.7 × 106
3.3 × 105
8.7 × 105
5.5 × 105
3.3 × 105
2.0 × 106
5.0 × 106
2.0 × 106
1.7 × 106
2.6 × 106
1.1 × 106
1.1 × 106
5.3 × 105
1.3 × 106
1.0 × 106
5.0 × 106
2.0 × 106
2.0 × 106
5.3 × 105
2.1 × 105
5.3 × 105
1.1 × 106
7.9 × 105
1.0 × 106
2.0 × 106
5.0 × 105
5.0 × 105
5.3 × 105
8.0 × 104
8.0 × 104
1.1 × 105
8.0 × 104
1.9 × 104
1.6 × 105
2.1 × 105
8.5 × 104
1.5 × 105
1.5 × 105
1.3 × 104
7.7 × 104
4.7 × 104
1.2 × 104
1.7 × 105
3.8 × 105
1.8 × 105
1.5 × 105
2.3 × 105
9.3 × 104
1.2 × 105
4.2 × 104
1.1 × 105
1.1 × 105
4.4 × 105
1.7 × 105
1.7 × 105
4.7 × 104
1.8 × 104
4.2 × 104
4.7 × 104
7.0 × 104
8.9 × 104
1.7 × 105
4.4 × 104
5.5 × 104
4.2 × 104
100
100
150
100
15
220
320
110
200
200
10
100
50
10
180
400
190
160
250
100
140
50
120
130
500
190
180
45
19
50
100
75
120
180
47
65
50
1
2
1
1
0.5
0.5
1
1
3
10
0.1
10
3
0.1
3
10
2
2
2
5
10
3
2
5
10
4
3
5
2
3
3
2
2
3
10
10
3
50
50
2
15
10
2
5
5
50
300
10
50
20
10
20
200
15
20
15
50
100
30
10
25
200
80
20
100
40
30
20
15
20
20
100
100
30
0.8
0.7
2.1
1.1
2.0
1.2
1.2
2.5
1.8
1.3
1.0
2.5
1.3
1.3
1.5
0.7
1.6
1.6
2.5
1.0
1.0
0.9
4.4
4.4
1.7
1.8
1.6
1.3
1.3
0.9
2.7
2.7
3.2
2.6
1.6
1.6
1.2
9
9
22
12
20
14
14
27
19
14
10
16
12
13
17
10
17
16
28
11
11
9.1
32
32
16
17
18
14
15
10
37
40
34
30
17
17
13
0.5
0.5
2.0
0.5
—
1.4
1.4
2.8
0.76
0.36
—
0.85
0.8
—
0.9
0.16
0.6
0.7
1.2
0.27
0.27
0.13
3.5
3.5
0.5
0.5
0.9
0.55
0.58
0.17
4.5
4.5
4.8
2.0
0.55
0.55
0.19
1250
1250
1000
1000
1500
1000
1000
1000
1500
1700
1500
1500
1000
1500
1000
2250
1250
1500
1000
1300
1300
1500
1000
1000
1500
1500
1000
1500
1500
1500
1250
1500
1000
1000
1300
1300
1500
e
t
!6
@7
!6
@3
@3
@0
@5
!0
@6
@1
@6
@6
@6
!9
@7
@8
@7
o
o
w
!3
!3
#0
#1
@6
y
u
w
@3
@4
@3
@3
o
o
w
q
q
e
w
e
r
r
t
y
u
i
y
i
o
o
!0
!1
!2
!3
!3
!4
!5
!5
!6
!7
!8
!9
@0
@1
@2
@3
@3
@4
R1635
R2496
R647-01
R4124
R4177-06
R12421
R12421-300
R1166
R1450
R3478
R3991A-04
R4125
R5611A-01
R1288A-06
R1924A
R4998
R7899-01
R8619
R9800
R9800-100
R13478
R3998-02
R3998-100-02
R6427
R7111
R7525
R13449
R580
R11102
R3886A
R9420
R9420-100
R13408
10 mm(3/8")
13 mm(1/2")
19 mm(3/4")
25 mm(1")
28 mm(1-1/8")
38 mm(1-1/2")
Note: The data shown in is measured with tapered voltage distribution ratio. Please refer to page 18 and 19 for each item in the above list.
Tubediameter
TypeNo.
Out-lineNo.
Spectral response Cathode characteristics Anode characteristics
Spectralresponse
range
Q.E.at peakTyp.
Curvecode
(nm) (%)
Lumi-nousTyp.
Bluesensitivityindex
(CS 5-58)Typ.
RadiantTyp.
RadiantTyp.
(µA/lm) (mA/W) (A/W)
Lumi-nousTyp.
GainTyp.
(A/lm)
Typ.
(nA)
Max.
(nA)
RisetimeTyp.(ns)
TransittimeTyp.(ns)
T.T.S.Typ.
(FWHM)(ns)
Dark current Time response
(V)
q w
e r t iuy y o !0 !1Anode tocathodesupplyvoltage
21
E678-11*
E678-11*
E678-13F*
E849-68
E678-13E*
E678-13F*
E678-13F*
E678-12L*
E678-12L*
E678-12L*
E678-12R*
E678-12L*
E678-12A*
E678-14-03*
E678-14C*
E678-12A*
E678-12A*
E678-12A*
E678-12A*
E678-12A*
E678-20B*
E678-14C*
E678-14C*
E678-14C*
E678-14C*
E678-14C*
E678-20B*
E678-12A*
E678-12A
E678-12A*
E678-12A*
E678-12A*
E678-20B*
z
z
x
c
c
c
v
b
n
m
⁄1
⁄0
⁄0
⁄2⁄3
⁄1
⁄4
⁄4
⁄4
1500
1500
1250
1250
1800
1250
1250
1250
1800
1800
1800
1800
1250
1800
1250
2500
1800
1800
1500
1500
1500
1750
1500
1500
2000
2000
1250
1750
1750
1750
1750
1750
1250
1250
1500
1500
1750
0.03
0.03
0.1
0.03
0.02
0.1
0.1
0.1
0.1
0.1
0.02
0.1
0.1
0.02
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.2
0.2
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
1.0
1.0
1.0
1.0
2.0
—
—
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
—
—
1.0
1.0
1.0
1.0
1.0
1.0
1.0
—
1.0
1.0
0.5
1.0
1.0
1.0
—
23 / BGO *1
23 / BGO *1
7.8
8.1
12.0
—
—
7.8
7.8
7.8
11.0
7.8
8.0
9.0
7.8
8.0
7.8
7.8
8.0
7.8
—
8.0
7.5
7.0
7.8
7.8
7.8
7.8
7.8
8.0
7.7
7.7
7.6
7.5
7.8
7.0
8.0
2.0
2.0
2.0
2.0
2.0
—
—
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
—
—
1.0
1.0
2.0
2.0
2.0
2.0
2.0
—
1.0
1.0
0.5
2.0
2.0
2.0
—
3
3
3
2
8
3
3
4
4
4
20
100
10
30
30
40
30
100
5
30
30
10
8
8
10
100
30
10
100
10
40
150
10
20
30
30
20
7
7
7
5
13
12
12
7
8
8
40
170
20
50
50
70
50
150
8
50
50
25
10
10
30
150
50
30
150
30
60
200
30
30
50
50
50
UV type (R3878)
SILICA (R760) and UV (R960) types
UV type (R4141)
Flying lead type (R4177-04)
UV types (R12421-03)
EGBA type
SILICA (R762) and UV (R750) types
SILICA (R2076) and UV (R3479) types
Glass base type (R5611A)
Flying lead type (R1288A-04)
Flying lead type (R1924A-01)
SILICA type (R5320)
Glass base type (R7899)
SBA type
SBA type
UV type (R7056)
SBA type
R1635
R2496
R647-01
R4124
R4177-06
R12421
R12421-300
R1166
R1450
R3478
R3991A-04
R4125
R5611A-01
R1288A-06
R1924A
R4998
R7899-01
R8619
R9800
R9800-100
R13478
R3998-02
R3998-100-02
R6427
R7111
R7525
R13449
R580
R11102
R3886A
R9420
R9420-100
R13408
LINE / 8
LINE / 8
LINE / 10
LINE / 10
LINE / 10
LINE / 10
LINE / 10
LINE / 10
LINE / 10
LINE / 8
C+L / 10
LINE / 10
LINE / 10
C+L / 10
C+L / 10
LINE / 10
LINE / 10
LINE / 10
LINE / 8
LINE / 8
LINE / 8
B+L / 9
B+L / 9
LINE / 10
C+L / 10
LINE / 8
LINE / 8
LINE / 10
C+L / 10
C+L / 10
LINE / 8
LINE / 8
LINE / 8
Note 1: This data is measured with 22Na source and BGO scintillator.
(at 25 °C)
TypeNo.
Note
StabirityMax. ratings RemarksPulse linearity
(%)
5 %deviation
Typ.
Dynodestructure/ stage
(mA)
2 %deviation
Typ.
(mA)
ShorttermTyp.
(%)
LongtermTyp.
(%)
Averageanodecurrent
(mA)
Anodeto
cathodevoltage
(V)
!2 !3 !4 !5
!6 !7Typicalpulseheight
resolution
Socket&
socketassembly
22
Photomultiplier tubes
A-D
A-DA-D
A-D
A-D
A-D
A-EA-D
I
J
A-DF
A-DA-DF
A-DA-DA-DA-DA-D
A-D
A-DF
J
I
A-DA-DF
A-DF
A-DF
A-D
A-D
A-DF
A-DA-DF
A-DA-DF
A-D
300 to 650
300 to 650300 to 650
300 to 650
300 to 650
300 to 650
300 to 650300 to 650
160 to 650
160 to 650
300 to 650300 to 650300 to 650300 to 650300 to 650300 to 650300 to 650300 to 650300 to 650300 to 650
300 to 650
300 to 650300 to 650
200 to 650
160 to 650
300 to 650300 to 650300 to 650300 to 650300 to 650300 to 650300 to 650
300 to 650
300 to 650
300 to 650300 to 650300 to 650300 to 650300 to 650300 to 650300 to 650300 to 650300 to 650
90
90110
90
80
90
3060
100
100
1101309090130909595110110
90
110130
90
90
901101309010590105
70
80
701058080130808013080
10.5
10.511.5
10.5
10.0
10.5
4.58.5
12.5
11.5
11.513.510.510.513.510.510.010.011.511.5
10.5
11.513.5
10
10
10.511.513.510.513.510.513.5
9.0
10.0
9.013.510.010.013.510.010.013.511.5
85
8595
85
80
85
3860
100
90
9511085851108580809595
85
95110
85
85
85951108511085110
72
80
761108080115808011590
26
2628
26
25
26
1220
30
25
28352626352625252828
26
2835
25
26
26303526352635
22
25
223525253525253530
1.1 × 106
3.0 × 106
1.3 × 106
2.7 × 105
2.0 × 107
1.0 × 107
2.5 × 106
1.0 × 106
6.0 × 105
3.3 × 105
1.0 × 106
1.0 × 106
1.0 × 106
2.7 × 105
2.3 × 105
1.0 × 106
3.3 × 106
2.3 × 106
6.7 × 106
3.2 × 105
4.2 × 106
2.7 × 105
2.7 × 105
5.0 × 106
1.0 × 107
2.7 × 105
2.3 × 105
5.0 × 106
5.0 × 106
3.0 × 106
2.7 × 105
2.3 × 105
3.3 × 105
2.9 × 105
4.4 × 105
4.4 × 105
1.4 × 107
4.0 × 107
3.0 × 106
2.0 × 106
5.0 × 105
4.4 × 105
1.0 × 107
1.0 × 109
1.0 × 107
1.0 × 107
1.0 × 109
1.0 × 107
1.0 × 107
9.4 × 104
2.6 × 105
1.1 × 105
2.6 × 104
1.7 × 106
8.5 × 105
2.0 × 105
8.5 × 104
5.1 × 104
1.2 × 104
6.0 × 104
1.0 × 105
9.0 × 104
2.6 × 104
2.5 × 104
8.5 × 104
2.8 × 105
2.5 × 105
5.7 × 105
2.5 × 104
3.4 × 105
2.6 × 104
2.6 × 104
4.3 × 105
8.5 × 105
2.6 × 104
2.5 × 104
4.2 × 105
4.2 × 105
2.6 × 105
2.6 × 104
2.5 × 104
2.8 × 104
3.1 × 104
3.7 × 104
4.8 × 104
1.0 × 106
2.9 × 106
2.4 × 105
1.6 × 105
3.3 × 104
5.5 × 104
8.0 × 105
8.0 × 107
1.2 × 106
8.0 × 105
8.0 × 107
1.2 × 106
9.0 × 105
10027012030
180090020090541060
100
100
3030903003006003040030304509003030
450
450
500303030304046
100028002401603550800
80 0001300800
80 0001300800
610
1000 s-1 *2250251005335
5
5
21036691030221030210
10
10
502105101020503003020102010050005001005000500500
40100
2000 s-1 *22040020080020155050
50
50
203020405060502002020601202030
100
100
5002030204050100300180030020050100100010000100010001000010001000
2.62.72.67.01.31.70.83.43.42.62.3
2.3
2.3
8.58.51.72.12.12.52.02.09.58.02.62.79.59.5
5.5
5.5
3.610.010.09.09.020.020.02.52.23.53.53.33.33.64.43.63.85.03.86.0
4840486028321631332816
16
16
4848232929352023526448405252
46
46
435252555511511554534545414154725462806295
1.11.11.1—
0.550.550.373.63.6—
0.75
0.75
0.75
6.96.91.11.21.21.30.230.238.5—2
1.58.58.5
9.0
9.0
3.79.49.410.510.518.518.51.21.21.51.54.64.62.43.02.43.43.93.42.4
1500200015001000250025003000125015001500800
800
800
10001000175017501750175015001750100010001500200010001000
1500
1500
10001000100010001000125012502000250015001500125012501500150015001500150015002000
$4
$7
$4
q
#7
#8
!2
@3
@4
@3
$0
$0
$0
r
r
i
#2
#2
$5
w
!8
r
q
$3
$6
r
r
$8
$6
@6
t
t
r
r
!7
!7
$9
%0
#3
#4
!1
!1
%1
%2
%1
%1
%2
%1
#5
@5
@6
@7
@8
@9
#0
#1
#2
#3
#3
#4
#4
#5
#5
#5
#5
#6
#7
#8
#9
$0
$1
$1
$2
$2
$3
$4
$4
$5
$5
$6
$6
$7
$8
$9
$9
%0
%0
%0
%1
%1
%1
%2
R329-02
R331-05R1306
R1828-01
R2083
R2154-02
R4607A-06R6041
R6041-406
R6041-506
R6231R6231-100R7723R7724R7724-100R7725R13089R13435R6232R1307
R6091
R6233R6233-100
R11065
R11410
R12199R10233R10233-100R10806R10806-100R877R877-100
R1250
R6594
R11833-03R11833-100-03R5912R5912-20R5912-100R7081R7081-20R7081-100R12860
51 mm(2")
76 mm(3")
90 mm(3.5")
102 mm(4")
127 mm(5")
204 mm(8")
254 mm(10")
508 mm(20")
60 mm
80 mm
Note: The data shown in is measured with tapered voltage distribution ratio. Please refer to page 18 and 19 for each item in the above list.
Note 2: Dark count
Tubediameter
TypeNo.
Out-lineNo.
Spectral response Cathode characteristics Anode characteristics
Spectralresponse
range
Q.E.at peakTyp.
Curvecode
(nm) (%)
Lumi-nousTyp.
Bluesensitivityindex
(CS 5-58)Typ.
RadiantTyp.
RadiantTyp.
(µA/lm) (A/W)
Lumi-nousTyp.
GainTyp.
(A/lm)
Typ.
(nA)
Max.
(nA)
RisetimeTyp.(ns)
TransittimeTyp.(ns)
T.T.S.Typ.
(FWHM)(ns)
Dark current Time response
(V)
q w
e r t iuy y o !0 !1
(mA/W)
Anode tocathodesupplyvoltage
23
E678-21C*
E678-21C*E678-14W
E678-20B*
E678-19J*
E678-14W
E678-15C* —
—
—
E678-14WE678-14WE678-21C* E678-21C*E678-21CE678-21C*E678-20B*E678-20B*E678-14WE678-14W
E678-21C*
E678-14WE678-14W
E678-20B*
E678-20B*
E678-14WE678-14WE678-14WE678-14WE678-14WE678-14WE678-14W
E678-20B*
E678-20B*
E678-14WE678-14WE678-20B*E678-20B* E678-20BE678-20B*E678-20B* E678-20BE678-20B
⁄7⁄8
⁄6
⁄5
⁄9
⁄9
⁄9
⁄7⁄8
⁄9
⁄9
⁄9
⁄9
⁄9
⁄9
27002700250015003000300035001750175018001000
1000
1000
15001500200020002000200017502000150015002500250015001500
1750
1750
15001500150015001500150015003000300020002000150015002000200020002000200020002500
0.20.20.20.10.20.20.20.10.10.020.1
0.1
0.1
0.10.10.20.20.20.20.10.10.10.10.20.20.10.1
0.1
0.1
0.10.10.10.10.10.10.10.20.20.10.10.10.10.10.10.10.10.10.10.1
1.01.0—0.51.01.01.01.01.02.0—
—
—
0.50.51.01.01.01.0——0.50.51.01.00.50.5
—
—
—0.50.51.01.01.01.01.01.0——1.01.0———————
7.67.6—
6.3 (8.5) *37.87.87.87.67.610.0—
—
—
6.3 (8.5) *36.17.67.6—7.68.08.0
6.3 (8.5) *36.3 (8.5) *3
7.87.8
6.3 (8.5) *36.1
—
—
—6.3 (8.5)
6.1——8.07.68.38.3———————————
1.01.0—0.51.01.02.01.01.02.0—
—
—
0.50.51.01.01.01.0——0.50.51.01.00.50.5
—
—
—0.50.52.02.01.01.01.01.0——1.01.0———————
15100151
100250100501503040
40
40
5580606040303051408055
20
20
—5555101010016030100101040304040304020
30200305
2005001507020060—
—
—
10101009090806060105601101010
25
25
—10101010202015025050150303060606060606040
SILICA type (R2256-02) UV type (R5113-02)
K-FREE type (R1306-15)SILICA type (R2059) UV type (R4004)SILICA type (R3377)
Glass base type (R3149)
For low temperature operation down to -110 °CLow radicoactivity materialFor low temperature operation down to -186 °CLow radicoactivity materialSemiflexible lead type (R6231-01)SBA type
SBA type
Semiflexible lead type (R6232-01)K-FREE type (R1307-07)
Semiflexible lead type (R6233-01)SBA typeFor low temperature operation down to -186 °CLow radicoactivity materialFor low temperature operation down to -110 °CLow radicoactivity material
Semiflexible lead type (R10233-01)SBA type
SBA typeK-FREE type (R877-01)SBA type
SBA type
SBA type
SBA type
R329-02
R331-05R1306
R1828-01
R2083
R2154-02
R4607A-06R6041
R6041-406
R6041-506
R6231R6231-100R7723R7724R7724-100R7725R13089R13435R6232R1307
R6091
R6233R6233-100
R11065
R11410
R12199R10233R10233-100R10806R10806-100R877R877-100
R1250
R6594
R11833-03R11833-100-03R5912R5912-02R5912-100R7081R7081-20R7081-100R12860
LINE / 12
LINE / 12BOX / 8
LINE / 12
LINE / 8
LINE / 10
C+L / 10MC / 12
MC / 12
MC / 12
B+L / 8B+L / 8LINE / 8LINE / 10LINE / 10LINE / 12LINE / 8LINE / 10B+L / 8BOX / 8
LINE / 12
B+L / 8B+L / 8
B+L / 12
B+L / 12
C+L / 10B+L / 8B+L / 8B+L / 8B+L / 8
BOX / 10BOX / 10
LINE / 14
B+L / 10
B+L / 8B+L / 8B+L / 10B+L / 14B+L / 10B+L / 10B+L / 14B+L / 10B+L / 10
20
20
20
20
20
20
20
21 22
21 22
23
24
24
24
24
24
Note 3: This data in parenthese is measured with 57Co.
(at 25 °C)
TypeNo.
Note
StabirityMax. ratings RemarksPulse linearity
(%)
5 %deviation
Typ.
Dynodestructure/ stage
(mA)
2 %deviation
Typ.
(mA)
ShorttermTyp.
(%)
LongtermTyp.
(%)
Averageanodecurrent
(mA)
Anodeto
cathodevoltage
(V)
!2 !3 !4 !5
!6 !7Typicalpulseheight
resolution
Socket&
socketassembly
24
Photomultiplier tubes of special shapes
I
J
A-D
F
G
H
F
G
H
A-D
A-D
F
G
F
G
F
G
H
160 to 650
160 to 650
300 to 650
300 to 650
300 to 650
300 to 700
300 to 650
300 to 650
300 to 700
300 to 650
300 to 650
300 to 650
300 to 650
230 to 700
230 to 700
300 to 650
300 to 650
300 to 700
100
100
80
105
135
160
105
135
160
80
70
105
135
105
135
105
135
160
11.0
9.5
9.5
13.5
15.5
14
13.5
15.5
14
9.5
8.5
13.5
15.5
13.5
15.5
13.5
15.5
14
100
80
80
110
130
125
110
130
125
80
72
110
130
110
130
110
130
125
30
25
24
35
43
39
35
43
39
24
21
35
43
35
43
35
43
39
1.0 × 106
1.0 × 106
2.0 × 106
1.0 × 106
1.0 × 106
2.0 × 106
1.3 × 106
1.3 × 106
1.3 × 106
1.8 × 106
4.0 × 106
1.0 × 106
1.0 × 106
2.0 × 106
2.0 × 106
1.2 × 106
1.2 × 106
1.2 × 106
1.0 × 105
8.0 × 104
1.6 × 105
1.1 × 105
1.3 × 105
2.5 × 105
1.4 × 105
1.7 × 105
1.6 × 105
1.4 × 105
2.9 × 105
1.1 × 105
1.3 × 105
2.2 × 105
2.6 × 105
1.3 × 105
1.6 × 105
1.5 × 105
100
100
160
105
135
320
140
175
210
140
280
105
135
210
270
126
162
192
2
2
2
2
2
2
0.5/ch
0.5/ch
0.5/ch
0.5/ch
0.2/ch
0.2/ch
0.2/ch
1
1
2
2
2
20
20
20
20
20
20
5/ch
5/ch
5/ch
5/ch
2/ch
2/ch
2/ch
10
10
20
20
20
1.8
1.8
1.6
1.6
1.6
1.6
1.2
1.2
1.2
1.2
0.6
0.6
0.6
0.57
0.57
1.3
1.3
1.3
12.4
12.4
9.6
9.6
9.6
9.6
9.5
9.5
9.5
9.5
7.4
7.4
7.4
2.7
2.7
5.8
5.8
5.8
0.8
0.8
0.35
0.35
0.35
0.35
0.36
0.36
0.36
0.36
0.18
0.18
0.18
0.2
0.2
0.27
0.27
0.27
800
800
800
800
800
800
800
800
800
800
800
800
800
1000
1000
900
900
900
!5
!5
@2
@2
@2
@2
@2
@2
@2
@2
!6
!6
!6
!4
!4
$1
$1
$1
%3
%3
%4
%4
%4
%4
%5
%5
%5
%5
%6
%6
%6
%7
%7
%8
%8
%8
R8520-406
R8520-506
R7600U
R7600U-100
R7600U-200
R7600U-300
R7600U-100-M4
R7600U-200-M4
R7600U-300-M4
R7600U-00-M4
R5900U-00-L16
R5900U-100-L16
R5900U-200-L16
R9880U-110
R9880U-210
R11265U-100
R11265U-200
R11265U-300
30 mmsquare
type
25 mm(1")
39 mm(1.5")
51 mm(2")
A-D
A-D
A-D
300 to 650
300 to 650
300 to 650
80
80
70
9.5
9.5
9.0
23
23
22
5.0 × 105
1.0 × 107
1.0 × 107
40
800
700
5
15
30
30
100
200
1.5
2.1
2.5
5.6
7.5
9.5
0.35
0.35
0.44
2000
2000
2000
%3
%4
%4
%9
^0
^1
R5505-70
R7761-70
R5924-70
Metal package photomultipliers
Fine mesh photomultipliers
60 mm
76 mm(3")
A-D
A-D
300 to 650
300 to 650
110
110
11.5
11.5
28
28
2.7 × 105
2.7 × 105
30
30
2
2
20
20
9.5
9.5
52
52
8.5
8.5
1000
1000
r
r
^8
^9
R6234
R6235
Hexagonal shape photomultipliers
25 mm(1")
28 mm(1-1/8")
A-D
A-D
300 to 650
300 to 650
90
90
10.5
10.5
26
26
1.1 × 106
2.2 × 106
100
200
3
2
20
10
2
25
19
72
1.1
—
1000
1000
@6
#6
&0
&1
R7373A-01
R8143
2π shape photomultipliers
10 mm(3/8")
60 mm
76 mm(3")
25 mm(1")
25 mm(1")
38 mm(1-1/2")
A-D
A-D
A-D
A-D
A-D
A-D
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
100
110
110
80
80
80
10.0
11.5
11.5
9.5
9.5
10.0
76
76
72
95
95
85
85
80
95
95
76
76
80
25
28
28
23
23
25
1.0 × 106
2.7 × 105
2.7 × 105
2.5 × 106
1.2 × 106
1.3 × 106
3.8 × 104
7.6 × 105
7.2 × 105
2.6 × 104
2.6 × 104
9.4 × 104
1.8 × 105
8.0 × 104
2.6 × 104
2.6 × 104
1.9 × 105
9.9 × 104
1.0 × 105
100
30
30
200
100
100
1
2
2
20
10
10
50
20
20
250
200
100
0.9
9.5
9.5
1.8
5.0
1.3
9.0
52
52
20
25
12
0.6
8.5
8.5
1.0
2.8
0.6
1250
1000
1000
1250
1250
1300
e
r
r
#0
@9
o
^2
^3
^4
^5
^6
^7
R2248
R6236
R6237
R1548-07
R8997
R10550
Square, Rectangular shape photomultipliers
Tubediameter
TypeNo.
Out-lineNo.
Spectral response Cathode characteristics Anode characteristics
Spectralresponse
range
Q.E.at peakTyp.
Curvecode
(nm) (%)
Lumi-nousTyp.
Bluesensitivityindex
(CS 5-58)Typ.
RadiantTyp.
RadiantTyp.
(µA/lm) (A/W)
Lumi-nousTyp.
GainTyp.
(A/lm)
Typ.
(nA)
Max.
(nA)
RisetimeTyp.(ns)
TransittimeTyp.(ns)
T.T.S.Typ.
(FWHM)(ns)
Dark current Time response
(V)
q w
e r t iuy y o !0 !1
(mA/W)
Anode tocathodesupplyvoltage
25
(%) (mA)(mA)(%)(%)(mA)(V)
E678-32B
E678-32B
E678-32B
E678-32B
E678-32B
E678-32B
E678-32B
E678-32B
E678-32B
E678-32B
E678-32B
E678-32B
E678-32B
E678-12-01
E678-12-01
E678-19K
E678-19K
E678-19K
‹0
‹1
‹0
‹0
‹0
900
900
900
900
900
900
900
900
900
900
900
900
900
1100
1100
1000
1000
1000
0.03
0.03
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
—
—
1.0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
2.0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
30
30
30 *5
30 *5
30 *5
30 *5
10/ch
10/ch
10/ch
10
0.8/ch
0.8/ch
0.8/ch
10
10
20 *5
20 *5
20 *5
60
60
60
60
60
—
30/ch
30/ch
30/ch
30
1.2/ch
1.2/ch
1.2/ch
30
30
60
60
60
UV type (R7600U-03) is available
SBA type
UBA type
EGBA type
SBA type
UBA type
EGBA type
*4
*4
SBA type *4
UBA type *4
SBA type
UBA type
SBA type
UBA type
EGBA type
R8520-406
R8520-506
R7600U
R7600U-100
R7600U-200
R7600U-300
R7600U-100-M4
R7600U-200-M4
R7600U-300-M4
R7600U-00-M4
R5900U-00-L16
R5900U-100-L16
R5900U-200-L16
R9880U-110
R9880U-210
R11265U-100
R11265U-200
R11265U-300
MC / 10
MC / 10
MC / 10
MC / 10
MC / 10
MC / 10
MC / 10
MC / 10
MC / 10
MC / 10
MC / 10
MC / 10
MC / 10
MC / 10
MC / 10
MC / 12
MC / 12
MC / 12
For low temperature operation down to -110 °CLow radioactivity materialFor low temperature operation down to -186 °CLow radioactivity material
26
25
25
26
26
E678-17D*
—
—
.2300
2300
2300
0.01
0.01
0.1
2.0
2.0
2.0
9.5
9.5
9.5
2.0
2.0
2.0
180
320
500
250
450
700
For +HV operation
For +HV operation
For +HV operation
R5505-70
R7761-70
R5924-70
FM / 15
FM / 19
FM / 19
27
27
27
27
28
28
28
E678-14W
E678-14W
⁄9
⁄9
1500
1500
0.1
0.1
0.5
0.5
6.3 (8.5) *3
6.3 (8.5) *3
0.5
0.5
5
5
10
10
Semiflexible lead type (R6234-01) is available
Semiflexible lead type (R6235-01) is available
R6234
R6235
B+L / 8
B+L / 8
E678-12A*
E678-14C*
1250
1250
0.1
0.1
1.0
1.0
7.8
8
2.0
2.0
15
0.2
30
0.5
R7373A-01
R8143
LINE / 10
BOX / 11
E678-11N*
E678-14W
E678-14W
E678-17D*
E678-20B*
E678-20B*
z
⁄9
⁄9
,
1500
1500
1500
1750
1600
1600
0.03
0.1
0.1
0.1
0.1
0.1
1.0
0.5
0.5
1.0
2.0
—
23 / BGO *1
6.3 (8.5) *3
6.3 (8.5) *3
20 / BGO *1
16 / BGO *1
—
2.0
0.5
0.5
2.0
2.0
—
3
5
5
10
4
10
7
10
10
15
10
30
Semiflexible lead type (R6236-01) is available
Semiflexible lead type (R6237-01) is available
*4, Dual (2) channel
*4, Quadrant (4) channel
*4, Quadrant (4) channel
R2248
R6236
R6237
R1548-07
R8997
R10550
LINE / 8
B+L / 8
B+L / 8
LINE / 10
L+VB / 10
LINE / 8
Note 1: This data is measured with 22Na source and BGO scintillator.Note 3: This data in parenthese is measured with 57Co.Note 4: Dark current, time response and pulse linearity data is typical value for channel.Note 5: Tapered divider type is available.
(at 25 °C)
TypeNo.
Note
StabirityMax. ratings RemarksPulse linearity
5 %deviation
Typ.
Dynodestructure/ stage
2 %deviation
Typ.
ShorttermTyp.
LongtermTyp.
Averageanodecurrent
Anodeto
cathodevoltage
!2 !3 !4 !5
!6 !7Typicalpulseheight
resolution
Socket&
socketassembly
26
Photomultiplier tubes assemblies
A-D
F
G
H
A-D
F
G
H
A-D
F
G
H
F
G
H
F
G
F
G
F
G
F
G
A-D
A-D
A-D
A-D
A-D
A-D
A-D
F
G
300 to 650
300 to 650
300 to 650
300 to 700
300 to 650
300 to 650
300 to 650
300 to 700
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 700
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
80
105
135
160
80
105
135
160
80
105
135
160
105
135
160
105
135
105
135
105
135
105
135
95
95
95
95
75
95
70
105
135
9.5
13.5
15.5
14
9.5
13.5
15.5
14
9.5
13.5
15.5
14
13.5
15.5
14
13.5
15.5
13.5
15.5
13.5
15.5
13.5
15.5
12
12
12
12
12
12
8.5
13.5
15.5
80
110
130
125
80
110
130
125
80
110
130
125
110
130
130
110
130
110
130
110
130
110
130
100
100
100
100
90
100
72
110
130
24
35
43
39
24
35
43
39
24
35
43
39
35
43
39
35
43
35
43
35
43
35
43
32
32
32
32
29
32
21
35
43
3.5 × 106
2.0 × 106
2.0 × 106
2.5 × 106
6.0 × 105
5.0 × 105
5.0 × 105
5.0 × 105
6.0 × 105
5.0 × 105
5.0 × 105
5.0 × 105
1.2 × 106
1.2 × 106
1.2 × 106
1.0 × 106
1.0 × 106
1.0 × 106
1.0 × 106
1.0 × 106
1.0 × 106
1.0 × 106
1.0 × 106
1.5 × 106
4.0 × 105
1.5 × 106
4.0 × 105
1.5 × 106
1.5 × 106
2.0 × 106
2.0 × 106
2.0 × 106
2.8 × 105
2.2 × 105
2.6 × 105
3.1 × 105
4.8 × 104
5.5 × 104
6.5 × 104
6.2 × 104
5.0 × 104
5.5 × 104
6.5 × 104
6.2 × 104
1.3 × 105
1.6 × 105
1.5 × 105
1.1 × 105
1.3 × 105
1.1 × 105
1.3 × 105
1.1 × 105
1.3 × 105
1.1 × 105
1.3 × 105
1.5 × 105
4.0 × 104
1.5 × 105
4.0 × 104
1.4 × 105
1.5 × 105
1.4 × 105
2.2 × 105
2.6 × 105
280
210
270
400
50
53
68
80
50
53
68
80
126
162
192
105
135
105
135
105
135
105
135
142
38
142
38
110
142
140
210
270
0.8/ch
0.8/ch
0.8/ch
0.8/ch
0.2/ch
0.2/ch
0.2/ch
0.2/ch
0.2/ch
0.2/ch
0.2/ch
0.2/ch
2
2
2
1/ch
1/ch
0.4/ch
0.4/ch
0.4/ch
0.4/ch
0.2/ch
0.2/ch
0.1/ch
0.1/ch
0.1/ch
0.1/ch
0.02/ch
0.1/ch
0.2/ch
0.2/ch
0.2/ch
4/ch
4/ch
4/ch
4/ch
2/ch
2/ch
2/ch
2/ch
2/ch
2/ch
2/ch
2/ch
20
20
20
4/ch
4/ch
4/ch
4/ch
4/ch
4/ch
2/ch
2/ch
—
—
—
—
—
—
2/ch
2/ch
2/ch
0.83
0.83
0.83
0.83
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.3
1.3
1.3
1.1
1.1
0.52
0.52
0.6
0.6
0.6
0.6
0.52
0.52
0.52
0.52
0.45
0.52
0.60
0.60
0.60
12
12
12
12
12
12
12
12
12
12
12
12
5.8
5.8
5.8
5.3
5.3
5
5
5.1
5.1
7.4
7.4
4.9
4.9
4.9
4.9
5.2
4.9
6.8
6.8
6.8
0.33
0.33
0.33
0.33
0.38
0.38
0.38
0.38
0.38
0.38
0.38
0.38
0.27
0.27
0.27
0.39
0.39
0.34
0.34
0.35
0.35
0.18
0.18
0.35
0.35
0.35
0.35
0.38
0.35
0.18
0.18
0.18
-800
-800
-800
-800
-800
-800
-800
-800
-800
-800
-800
-800
-900
-900
-900
-1000
-1000
-1000
-1000
-1000
-1000
-800
-800
-1000
-1000
-1000
-1000
-1000
-1000
-800
-800
-800
#9
#9
#9
#9
$2
$2
$2
$2
$2
$2
$2
$2
$1
$1
$1
%6
%6
%6
%6
%6
%6
!6
!6
%5
%5
%5
%5
%5
%5
!6
!6
!6
&2
&2
&2
&2
&3
&3
&3
&3
&4
&4
&4
&4
&5
&5
&5
&6
&6
&7
&7
&8
&8
&9
&9
*0
*0
*1
*1
*2
*3
*4
*4
*4
H8711
H8711-100
H8711-200
H8711-300
H7546B
H7546B-100
H7546B-200
H7546B-300
H8804
H8804-100
H8804-200
H8804-300
H11934-100
H11934-200
H11934-300
H13226A-100
H13226A-200
H12445-100
H12445-200
H12428-100
H12428-200
H10515B-100
H10515B-200
H12700A
H12700A-10
H12700B
H12700B-10
H13700
H13974-00-1616
H7260
H7260-100
H7260-200
30 mmsquare
type
51 mmsquare
type
Rectangletype
106 mmsquare
type
Tubediameter
TypeNo.
Out-lineNo.
Spectral response Cathode characteristics Anode characteristics
Spectralresponse
range
Q.E.at peakTyp.
Curvecode
(nm) (%)
Lumi-nousTyp.
Bluesensitivityindex
(CS 5-58)Typ.
RadiantTyp.
RadiantTyp.
(µA/lm) (A/W)
Lumi-nousTyp.
GainTyp.
(A/lm)
Typ.
(nA)
Max.
(nA)
RisetimeTyp.(ns)
TransittimeTyp.(ns)
T.T.S.Typ.
(FWHM)(ns)
Dark current Time response
(V)
q w
e r t iuy y o !0 !1
(mA/W)
Anode tocathodesupplyvoltage
27
R7600-00-M16
R7600-100-M16
R7600-200-M16
R7600-300-M16
R7600-00-M64
R7600-100-M64
R7600-200-M64
R7600-300-M64
R7600-00-M64
R7600-100-M64
R7600-200-M64
R7600-300-M64
R11265-100
R11265-200
R11265-300
R11265-100-M4
R11265-200-M4
R11265-100-M16
R11265-200-M16
R11265-100-M64
R11265-200-M64
R5900-100-L16
R5900-200-L16
R12699-00-M64
R12699-00-M64
R12699-00-M64
R12699-00-M64
R12699-00-M256
R12699-00-M64
R7259
R7259-100
R7259-200
-1000
-1000
-1000
-1000
-1000
-1000
-1000
-1000
-1000
-1000
-1000
-1000
-1000
-1000
-1000
-1100
-1100
-1100
-1100
-1100
-1100
-900
-900
-1100
-1100
-1100
-1100
-1100
-1100
-900
-900
-900
0.017
0.017
0.017
0.017
0.023
0.023
0.023
0.023
0.023
0.023
0.023
0.023
0.018
0.018
0.018
0.018
0.018
0.018
0.018
0.018
0.018
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
7.4 / 3.1
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
0.5/ch
0.5/ch
0.5/ch
0.5/ch
0.3/ch
0.3/ch
0.3/ch
0.3/ch
0.3/ch
0.3/ch
0.3/ch
0.3/ch
20 *5
20 *5
20 *5
4/ch *5
4/ch *5
0.8/ch
0.8/ch
0.2/ch
0.2/ch
0.8/ch
0.8/ch
1/ch
3/ch
1/ch
3/ch
0.15/ch
1/ch
0.6/ch
0.6/ch
0.6/ch
1/ch
1/ch
1/ch
1/ch
0.6/ch
0.6/ch
0.6/ch
0.6/ch
0.6/ch
0.6/ch
0.6/ch
0.6/ch
60
60
60
7/ch
7/ch
2/ch
2/ch
0.4/ch
0.4/ch
1.2/ch
1.2/ch
—
—
—
—
—
—
0.8/ch
0.8/ch
0.8/ch
*4
SBA type
UBA type
EGBA type
*4
SBA type
UBA type
EGBA type
*4
SBA type
UBA type
EGBA type
SBA type
UBA type
EGBA type
SBA type *4
UBA type *4
SBA type *4
UBA type *4
SBA type *4
UBA type *4
SBA type *4
UBA type *4
UV types (H12700A-03)
Tapered divider type *4
UV types (H12700A-03) *4
Tapered divider type *4
UV types (H13700A-03) *4
2×2 PMT array, UV type (H13974-03-1616) *4
*4
SBA type *4
UBA type *4
H8711
H8711-100
H8711-200
H8711-300
H7546B
H7546B-100
H7546B-200
H7546B-300
H8804
H8804-100
H8804-200
H8804-300
H11934-100
H11934-200
H11934-300
H13226A-100
H13226A-200
H12445-100
H12445-200
H12428-100
H12428-200
H10515B-100
H10515B-200
H12700A
H12700A-10
H12700B
H12700B-10
H13700
H13974-00-1616
H7260
H7260-100
H7260-200
MC / 12
MC / 12
MC / 12
MC / 12
MC / 12
MC / 12
MC / 12
MC / 12
MC / 12
MC / 12
MC / 12
MC / 12
MC / 12
MC / 12
MC / 12
MC / 12
MC / 12
MC / 12
MC / 12
MC / 12
MC / 12
MC / 10
MC / 10
MC / 10
MC / 10
MC / 10
MC / 10
MC / 10
MC / 10
MC / 10
MC / 10
MC / 10
Note 4: Dark current, time response and pulse linearity data is typical value for channel.Note 5: Tapered divider type is available.
(at 25 °C)
TypeNo.
Note
StabirityMax. ratings RemarksPulse linearity
(%)
5 %deviation
Typ.
Dynodestructure/ stage
(mA)
2 %deviation
Typ.
(mA)
ShorttermTyp.
(%)
LongtermTyp.
(%)
Averageanodecurrent
(mA)
Anodeto
cathodevoltage
(V)
!2 !3 !4 !5
!6Typicalpulseheight
resolution
Built-in PMT(Type No.
for referring)
28
Photomultiplier tubes assemblies
A-D
C-D
A-D
A-D
H
A-D
A-D
A-D
C-D
A-D
A-D
A-D
A-D
A-D
A-D
A-D
A-D
A-D
A-D
A-D
A-D
A-D
A-D
A-D
A-D
300 to 650
160 to 650
300 to 650
300 to 650
300 to 700
300 to 650
300 to 650
300 to 650
160 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
300 to 650
100
100
110
110
160
110
115
115
115
90
80
80
95
95
100
95
80
90
90
90
90
80
70
90
70
10
10
10
10
14
10.5
11.0
11.0
11.0
10.5
9.5
9.5
11.0
11.0
11.0
11.0
9.5
10.5
10.5
10.5
10.5
10.0
9.0
10.5
9.0
80
80
80
80
105
85
88
88
88
85
76
76
88
88
88
88
76
85
85
85
85
80
72
85
72
25
25
25
25
31
26
27
27
27
26
23
23
27
27
27
27
23
26
26
26
26
25
22
26
22
1.0 × 106
1.0 × 106
1.4 × 106
2.0 × 106
2.0 × 106
1.0 × 106
1.7 × 106
1.7 × 106
1.0 × 106
5.5 × 105
5.0 × 106
5.0 × 105
1.7 × 106
1.1 × 106
5.0 × 106
7.9 × 105
1.0 × 107
3.0 × 106
3.0 × 106
2.0 × 107
2.0 × 107
2.5 × 106
1.0 × 106
1.0 × 107
1.4 × 107
8.0 × 104
8.0 × 104
1.1 × 105
1.6 × 105
2.1 × 105
8.5 × 104
1.5 × 105
1.5 × 105
8.6 × 104
4.7 × 104
3.8 × 105
3.8 × 104
1.5 × 105
9.3 × 104
4.4 × 105
7.0 × 104
7.6 × 105
2.5 × 105
2.5 × 105
1.7 × 106
1.7 × 106
2.0 × 105
7.2 × 105
8.5 × 105
1.0 × 106
100
100
150
220
320
110
200
200
120
50
400
40
160
100
500
75
800
270
270
1800
1800
200
700
900
1000
1
2
1
0.5
1
1
3
10
10
3
10
5
2
5
10
2
15
10
10
50
50
100
30
30
50
50
50
2
2
5
5
50
300
300
20
200
30
20
50
200
15
100
100
100
400
400
800
200
120
300
0.8
0.7
2.1
1.2
1.2
2.5
1.8
1.3
1.3
1.3
0.7
1.5
1.6
1.0
1.7
2.7
2.1
2.7
2.7
1.3
1.3
0.8
2.5
2.7
2.5
9.0
9
22
14
14
27
19
14
14
12
10
5.6
16
11
16
40
7.5
40
40
28
28
16
9.5
40
54
0.5
0.5
2.0
1.4
1.4
2.8
0.76
0.36
0.36
0.8
0.16
0.35
0.7
0.27
0.5
4.5
0.35
1.1
1.1
0.55
0.55
0.37
0.44
1.5
1.2
-1250
-1250
-1000
-1000
-1000
-1000
-1500
-1700
-1700
-1000
-2250
+2000
-1500
-1300
-1500
-1500
+2000
-2000
-2000
-2500
-2500
-3000
+2000
-2000
-3000
*5
*6
*7
*8
*8
*9
(0
(1
(2
(3
(4
(5
(6
(7
(8
(9
H3164-10
H3695-10
H3165-10
H12690
H12690-300
H6520
H6524
H6612
H6613
H8135
H6533
H6152-70
H8643
H10580
H7415
H3178-51
H8409-70
H6410
H7195
H1949-50
H1949-51
H2431-50
H6614-70
H6559
H6527
100
101
102
103
104
105
106
107
108
10 mm(3/8")
19 mm(3/4")
38 mm(1-1/2")
51 mm(2")
76 mm(3")
127 mm(5")
25 mm(1")
13 mm(1/2")
28 mm(1-1/8")
Tubediameter
TypeNo.
Out-lineNo.
Spectral response Cathode characteristics Anode characteristics
Spectralresponse
range
Q.E.at peakTyp.
Curvecode
(nm) (%)
Lumi-nousTyp.
Bluesensitivityindex
(CS 5-58)Typ.
RadiantTyp.
RadiantTyp.
(µA/lm) (A/W)
Lumi-nousTyp.
GainTyp.
(A/lm)
Typ.
(nA)
Max.
(nA)
RisetimeTyp.(ns)
TransittimeTyp.(ns)
T.T.S.Typ.
(FWHM)(ns)
Dark current Time response
(V)
q w
e r t iuy y o !0 !1
(mA/W)
Anode tocathodesupplyvoltage
29
R1635
R2496
R647-01
R12421
R12421-300
R1166
R1450
R3478
R2076
R5611A
R4998
R5505-70
R7899-01
R9800
R6427
R580
R7761-70
R329-02
R329-02
R1828-01
R1828-01
R2083
R5924-70
R6091
R1250
-1500
-1500
-1250
-1250
-1250
-1250
-1800
-1800
-1800
-1250
-2500
+2300
-1800
-1500
-2000
-1750
+2300
-2700
-2700
-3000
-3000
-3500
+2300
-2500
-3000
0.03
0.03
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.01
0.1
0.1
0.2
0.1
0.01
0.2
0.2
0.2
0.2
0.2
0.1
0.2
0.2
1.0
1.0
1.0
—
—
1.0
1.0
1.0
1.0
1.0
1.0
2.0
1.0
1.0
1.0
1.0
2.0
1.0
1.0
1.0
1.0
1.0
2.0
1.0
1.0
23/BGO *1
23/BGO *1
7.8
—
—
7.8
7.8
7.8
7.8
8.0
8.0
9.5
7.8
7.8
7.8
7.7
9.5
7.6
7.6
7.8
7.8
7.8
9.5
7.8
8.3
2.0
2.0
2.0
—
—
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
1.0
2.0
1.0
1.0
1.0
1.0
2.0
2.0
1.0
1.0
3
3
3
3
3
4
4
4
4
10
40
180
100
30
10
150
320
100
80
100
100
100
500
100
100
7
7
7
12
12
7
8
8
8
20
70
250
150
50
30
200
450
200
110
200
200
150
700
200
150
EGBA type
Silica type H6610 (R5320)
For +HV operation
Silica type H7416 (R7056)
For +HV operation
Silica type H3378-50 (R3377)
For +HV operation
H3164-10
H3695-10
H3165-10
H12690
H12690-300
H6520
H6524
H6612
H6613
H8135
H6533
H6152-70
H8643
H10580
H7415
H3178-51
H8409-70
H6410
H7195
H1949-50
H1949-51
H2431-50
H6614-70
H6559
H6527
LINE / 8
LINE / 8
LINE / 10
LINE / 10
LINE / 10
LINE / 10
LINE / 10
LINE / 8
LINE / 8
C+L/10
LINE / 10
FM/15
LINE / 10
LINE / 8
LINE / 10
LINE / 10
FM/19
LINE / 12
LINE / 12
LINE / 12
LINE / 12
LINE / 8
FM/19
LINE / 12
LINE / 14
Note 1: This data is measured with 22Na source and BGO scintillator.
TypeNo.
Note
StabirityMax. ratings RemarksPulse linearity
(%)
5 %deviation
Typ.
Dynodestructure/ stage
(mA)
2 %deviation
Typ.
(mA)
ShorttermTyp.
(%)
LongtermTyp.
(%)
Averageanodecurrent
(mA)
Anodeto
cathodevoltage
(V)
(at 25 °C)
!2 !3 !4 !5
!6Typicalpulseheight
resolution
Built-in PMT(Type No.
for referring)
UV type H6522 (R5115-02)Silica type H6521 (R2256-02)
UV type H4022-50 (R4004)Silica type H3177-50 (R2059)UV type H4022-51 (R4004)Silica type H3177-51 (R2059)
30
15 MIN.
18.6 ± 0.7
FACEPLATE
PHOTOCATHODE
88 ±
213
MA
X.
12 PIN BASE
DY3
DY5
DY7
DY9
P
SHORT PIN
12
3
4
56 7
8
9
10
1112
DY10 DY8
DY6
DY4
DY2
K
DY1
Dimensional outline and basing diagramsFor photomultiplier tubesq R1635, R2496 w R4124
e R647-01, R4177-06 r R12421, R12421-300
t R1166 y R1450, R4125
TPMHA0343EB TPMHA0102EA
TPMHA0593EATPMHA0120EA
TPMHA0344EA TPMHA0307EA
15 MIN.
18.6 ± 0.7
FACEPLATE
PHOTOCATHODE
88 ±
213
MA
X.
12 PIN BASE
DY3
DY5
DY7
DY9
P
SHORT PIN
12
3
4
56 7
8
9
10
1112
DY10 DY8
DY6
DY4
DY2
K
DY1
A
R1635
R2496
R2496 has a plano-concave faceplate.
9.7 ± 0.4
10.5 ± 0.5
12
3
4
56
7
8
9
1011
IC
DY1
DY3
DY5
DY7
SHORT PIN
DY8
DY6
DY4
DY2
K
P
FACEPLATE
PHOTOCATHODE
11 PIN BASE
8 MIN.
10 M
AX
.45
.0 ±
1.5
A
12
3
4
56 7 8
9
10
11
1213
DY1
DY3
DY5
DY7
DY9
P DY10 DY8
DY6
DY4
DY2
ICK
SHORT PIN
BASING DIAGRAM(BOTTOM VIEW)
10 MIN.
13.5 ± 0.5
43 ±
213
MA
X.
13 PIN BASE
PHOTOCATHODE
FACEPLATE
13.5 ± 0.5
10 MIN.
50 ±
213
MA
X.
13 PIN BASE
PHOTOCATHODE
FACEPLATE
12
3
4
56 7 8
9
10
11
1213
ICDY1
DY3
DY5
DY7
DY9P
DY10
DY8
DY6
DY4
DY2
K
SHORT PIN
13 PIN BASE
PHOTOCATHODE
FACEPLATE
B
A
10 MIN.
13 M
AX
.
A B
R647-01
R4177-06
13.5 ± 0.5
14.5 ± 0.7
71 ± 2
61 ± 2
12
3
4
56 7 8
9
10
11
1213DY3
DY5
DY7
DY9
PDY10
SHORT PIN
DY8
DY6
DY4
DY2
KDY1IC
(Unit: mm)
31
u R3478 i R3991A-04, R5611A-01
o R1288A-06, R1924A
!1 R7899-01 !2 R8619
TPMHA0431EB TPMHA0117ED
TPMHA0040EC
TPMHA0474EB TPMHA0551ED
TPMHA0093EF
!0 R4998
FACEPLATE
PHOTOCATHODE
15 MIN.
18.6 ± 0.7
65 ±
213
MA
X.
12 PIN BASE
DY3
DY5
DY7
IC
P
IC
SHORT PIN
12
3
4
56 7
8
9
10
1112
DY8
DY6
DY4
DY2
K
DY1
12
3
4
56
7 89
10
11
12
1314
KDY1
DY6
DY5
DY7
DY9P IC
IC
DY10
DY8
DY3
DY4DY2
SHORT PIN
25.4 ± 0.5
22 MIN.
13 M
AX
.43
.0 ±
1.5
FACEPLATE
PHOTOCATHODE
14 PIN GLASS BASE
3
4
5
67
10
18
DY1
DY3
DY5
DY7
DY9
PDY10
DY8
DY6
DY4
DY2
K
1112
13
14
17
A TEMPORARY BASE REMOVED
B BOTTOM VIEW
25.4 ± 0.5
22 MIN.
68.0
± 1
.5
13 M
AX
.
LEA
D L
EN
GT
H 5
0 M
IN.
FACEPLATE
PHOTO-CATHODE
12 PIN BASEJEDECNo. B12-43
A
SEMIFLEXIBLELEADS
B
37.3 ± 0.5
12
3
4
56 7
8
9
10
1112
DY1
DY3
DY5
DY7
DY9 DY8
DY6
DY4
DY2
K
P DY10
A TEMPORARY BASE REMOVED
A
R3991A-04
R5611A-01
28 ± 1.5
30 ± 1.5
PHOTOCATHODE
FACEPLATE
A
18.6 ± 0.7
13 M
AX
.
LEA
D L
EN
GTH
45
MIN
.
15 MIN.
37.3 ± 0.5
DY3
DY5
DY7
DY9
P DY10
12
3
4
56 7
8
9
10
1112
DY8
DY6
DY4
DY2
KDY1
DY1
DY3
DY5
DY7
P
DY9 DY10
DY8
DY6
DY4
DY2K
12
3
4
5
69
10
11
121314
B BOTTOM VIEW
A GLASS BASE
(12)
(360/14)°
A
B
SEMIFLEXIBLELEADS
12PIN BASEJEDEC No.B12-43
12
3
4
7
5
1211
109
18
P
DY1DY3
DY5
DY7(Acc)
DY9
DY10
ICICIC
DY8
DY6
DY4
DY2GK
12
3
4
56 7
8
9
10
1112
P
DY1
DY3
DY5
DY7(Acc)
DY9
DY10 DY8
DY6
DY4
DY2
G
K
13
14
1516
17
A GLASS BASE
A TEMPORARY BASE REMOVED
26 ± 1
20 MIN.
71 ±
2
13 M
AX
.
LEA
D L
EN
GT
H 5
2 M
IN.
HA TREATMENT
37.3 ± 0.5
PHOTOCATHODE
FACEPLATE
B BOTTOM VIEW
(17.3)
7
40° 20°
A
SMA CONNECTOR
SEMIFLEXIBLELEADS
12 PIN BASEJEDECNo. B12-43
B
4
32
1
12
135
6
14
1516
18
DY9
DY7
DY5
DY3DY1
P DY10
DY8
DY6
DY4
DY2
K
DY1
DY3
DY5
DY7
DY9P
12
3
4
56 7
8
9
10
1112
DY10
DY8
DY6
DY4
DY2
K
ATEMPORARY BASE REMOVED
BBOTTOM VIEW
13 M
AX
.
79 ±
2LE
AD
LE
NG
TH
50
MIN
.
22 MIN.
25.4 ± 0.5
PHOTOCATHODE
FACE PLATE
SEMIFLEXIBLELEADS
37.3 ± 0.5
A
B
12 PIN BASE JEDECNo. B12-43
(17.3)
6.5
MA
X.20°
A GLASS BASE
32
!3 R9800, R9800-100 !4 R13478
!5 R3998-02, R3998-100-02 !6 R6427
!7 R7111 !8 R7525
TPMHA0521ED TPMHA0619EA
TPMHA0114EA TPMHA0387EB
TPMHA0506EA TPMHA0450EB
FACEPLATE
PHOTO-CATHODE
14 PIN BASE
28.5 ± 0.5
25 MIN.
60 ±
213
MA
X.
12
3
4
56
7 89
10
11
12
1314
GDY2
DY3
IC
DY6
DY8P DY9
DY7
DY5
IC
DY4
DY1K
SHORT PIN
28.5 ± 0.5
25 MIN.FACEPLATE
PHOTOCATHODE
85 ±
213
MA
X.
14 PIN BASE
12
3
4
56
7 89
10
11
12
1314
ICDY3
DY2
DY7
DY9
ICP DY10
DY8
DY6
DY4
DY5
KDY1
SHORT PIN
12
3
4
56
7 89
10
11
12
1314
KDY1
DY6
DY5
DY7
DY9P IC
IC
DY10
DY8
DY3
DY4DY2
SHORT PIN
28.5 ± 0.5
25 MIN.FACEPLATE
PHOTOCATHODE
43.0
± 1
.513
MA
X.
14 PIN BASE
12
3
4
56
7 89
10
11
12
1314
ICDY3
DY2
DY5
DY7
ICP DY8
DY6
IC
DY4
IC
KDY1
SHORT PIN
28.5 ± 0.5
25 MIN.FACEPLATE
PHOTOCATHODE
85 ±
213
MA
X.
14 PIN BASE
5
13
810
146
127
15
1
DY3
DY1
DY5
DY7P
DY8
DY6
DY4
DY2
K
DY1
DY3
DY5
DY7
ICP
12
3
4
56 7
8
9
10
1112
IC
DY8
DY6
DY4
DY2
K
ATEMPORARY BASE REMOVED
BBOTTOM VIEW
A GLASS BASE
20°
(17.3)13
MA
X.
55 ±
2LE
AD
LE
NG
TH
55
MIN
.
22 MIN.
25.4 ± 0.5
PHOTOCATHODE
FACE PLATE
SEMIFLEXIBLELEADS
37.3 ± 0.5
A
B
12 PIN BASE JEDECNo. B12-43
DY1
DY7
DY3
DY5
Acc
P
DY8
DY6
DY4
DY2
1112
14
15
13
18K
G
DY1
DY3
IC
DY5
DY7
PIC
IC Acc
ICIC
ICK
11 1213
14
DY8DY6
IC
DY4
DY2
IC
G
BBOTTOM VIEW
9
6
4
32
1
15
1617
1819
2023
45
67
89 10
1
A GLASS BASE
ATEMPORARY BASE REMOVED
13 M
AX
. 55 ±
2LE
AD
LE
NG
TH
55
MIN
.
22 MIN.
25.4 ± 0.5
51.2 ± 0.5
20 PIN BASEJEDECNo. B20-102
SEMIFLEXIBLELEADS 0.7
FACEPLATE
PHOTOCATHODE
A
B
20°
(17.3)
6.5
MA
X.
(Unit: mm)
33
TPMHA0620EA
!9 R13449 @0 R580
@1 R11102
@3 R9420, R9420-100 @4 R13408
TPMHA0121EB
TPMHA0228EA
TPMHA0519EE TPMHA0621EE
TPMHA0104EC
@2 R3886A
37.3 ± 0.5
12 PIN BASEJEDECNo. B12-43
34 MIN.FACEPLATE 38 ± 1
PHOTO-CATHODE
109
± 2
127
MA
X. DY1
DY3
DY5
DY7
DY9
P
12
3
4
56 7
8
9
10
1112
DY10
DY8
DY6
DY4
DY2
K
R580
37.3 ± 0.5
12 PIN BASEJEDECNo. B12-43
34 MIN.FACEPLATE
38 ± 1
PHOTO-CATHODE
99 ±
2
116
MA
X. DY1
DY3
DY5
DY7
DY9
P
12
3
4
56 7
8
9
10
1112
DY10
DY8
DY6
DY4
DY2
KP
DY1
DY3
DY5
DY7
DY9
P
12
3
4
56 7
8
9
10
1112
DY10
DY8
DY6
DY4
DY2
K
ATEMPORARY BASE REMOVED
BBOTTOM VIEW
38.0 ± 0.7
34 MIN.
63.5
± 1
.5LE
AD
LE
NG
TH
70
MIN
.
13 M
AX
.
DY3
DY5
DY7
DY9
DY10
DY8
DY6
DY4
DY2
K
3
4
5
6 10
11
12
13
1512
9
DY1
B
37.3 ± 0.5
PHOTO-CATHODE
FACEPLATE
12 PIN BASEJEDECNo. B12-43
A
SEMIFLEXIBLELEADS
A GLASS BASE
(23)
22.5°
5 13
4 14
2
6 12
7 11
1DY1
DY3
DY5
DY7
P DY8
DY6
DY4
DY2
K
DY1
DY3
DY5
DY7
IC
P
12
3
4
56 7
8
9
10
1112
IC
DY8
DY6
DY4
DY2
K
ATEMPORARY BASE REMOVED
BBOTTOM VIEW13 M
AX
.
87 ±
2LE
AD
LE
NG
TH
70
MIN
.
34 MIN.
38 ± 1
PHOTOCATHODE
FACE PLATE
37.3 ± 0.5
12 PIN BASE JEDECNo. B12-43
A
B
SEMIFLEXIBLELEADS
A GLASS BASE
(23)
22.5°
DY5
DY1
DY3
DY7
AccP DY8
DY6
DY4
DY2
G
9
10
11
12
13
15K
DY1
DY3
IC
DY5
DY7
PIC
IC Acc
ICIC
ICK
11 1213
14
DY8DY6
IC
DY4
DY2
IC
G
BBOTTOM VIEW
76
5
4
2
3
15
1617
1819
2023
45
67
89 10
1
A GLASS BASE
ATEMPORARY BASE REMOVED13
MA
X. 55
± 2
LEA
D L
EN
GT
H 7
0 M
IN.
25 MIN.
28.7 ± 0.5
51.2 ± 0.5
20 PIN BASEJEDECNo. B20-102
SEMIFLEXIBLELEADS
FACEPLATE
PHOTOCATHODE
A
B
24°
(19.05)
7.5
MA
X.
4 12
13
2
3
5 11
6 108 9
16DY1
DY3
DY5
DY7
P
Acc
DY6
DY8
DY4
DY2
G
K
BBOTTOM VIEW
A GLASS BASE
ATEMPORARY BASE REMOVED
DY1
DY3
IC
DY5
DY7
PIC
IC Acc
ICIC
ICK
11 1213
14
DY8DY6
IC
DY4
DY2
IC
G
15
1617
1819
2023
45
67
89 10
1
13 M
AX
.
73 ±
2LE
AD
LE
NG
TH
73
MIN
.
34 MIN.
38 ± 1
PHOTOCATHODE
FACEPLATE
SEMIFLEXIBLELEADS
51.2 ± 0.5
20 PIN BASEJEDECNo. B20-102
A
B
(23)
22.5°
7.5
MA
X.
34
@5 R329-02 @6 R331-05
@7 R1306 @8 R1828-01
@9 R2083 #0 R2154-02
TPMHA0123EG TPMHA0072EF
TPMHA0089EC TPMHA0064EE
TPMHA0185EE TPMHA0296EB
123
4567
98
11121314
151617
1819
2021
DY1DY3
DY5
DY2
P
DY9DY11
DY12IC
SH IC DY10DY8
DY6DY4
DY7
G
IC
ICIC
K
10
21 PIN BASE
46 MIN.FACEPLATE53.0 ± 1.5
127
± 2
HA TREATMENT14
MA
X.
LIGHT TIGHT SHIELD
PHOTO-CATHODE
*CONNECT SH TO DY5
53.0 ± 1.5
46 MIN.FACEPLATE
PHOTO-CATHODE
HA TREATMENT
21 PIN BASE
126
± 2
13 M
AX
.
50.0
± 0
.2
123
4567
98
10 11 12 1314
151617
1819
2021
DY1DY3
DY5
DY2
P
DY9
DY11
DY12IC
SH IC DY10DY8
DY6DY4
DY7
G
ICIC
ICK
*CONNECT SH TO DY5
SHORT PIN
12
3
4
56
7 89
10
11
12
1314
DY1DY2
IC
DY4
DY5
DY6DY7 DY8
IC
IC
P
DY3
GK
51.0 ± 0.5
46 MIN.
114
± 2
137
MA
X.
56.5 ± 0.5
FACEPLATE
PHOTO-CATHODE
14 PIN BASEJEDEC No. B14-38
53.0 ± 1.5
46 MIN.FACEPLATE
PHOTO-CATHODE
170
± 3
192
MA
X.
HA TREATMENT
51.2 ± 0.5
20 PIN BASEJEDECNo. B20-102
2
IC
34567
89 10 1112
1314151617
1819
201DY1DY3IC
DY5
DY7
DY9DY11
ICP DY12
DY10DY8
DY6
DY4
DY4DY2
ICG
K
19 PIN BASE
46 MIN.
53.0 ± 1.5
PHOTO-CATHODE
121
± 2
FACEPLATE
13 M
AX
.
HA TREATMENT
SHORT PIN
12
345
76
98
10 1112
1314
15
1617
1819DY1
DY3
DY5
DY7
P
IC IC IC
ACC KG
IC
DY2
DY4
DY4
DY6DY8
SMA CONNECTOR
51.0 ± 0.5
46 MIN.FACEPLATE
PHOTO-CATHODE
124
± 2
147
MA
X.
56.5 ± 0.5
14 PIN BASEJEDECNo. B14-38
12
3
4
7 89
10
11
12
1314
DY1DY2
IC
DY4
DY5
DY6DY7 DY8
DY9
DY10
P
DY3
ICK
56
(Unit: mm)
35
TPMHA0003EC
#1 R4607A-06 #2 R6041
#3 R6041-406, R6041-506
#5 R7723, R7724, R7724-100, R7725 #6 R13089
TPMHA0578EB
TPMHA0579EB
TPMHA0509EC TPMHA0606EA
TPMHA0388EB
#4 R6231, R6231-100
52 ± 1
46 MIN.FACEPLATE
PHOTOCATHODE
80 ±
213
MA
X.
15 PIN BASE
DY1
DY3
DY5
DY7
DY9
P
IC IC DY10
DY8
DY6
DY4
DY2
IC
K
12
3
4
56
7 8 910
11
12
1314
15
SHORT PIN
51.0 ± 0.5
46 MIN.FACEPLATE
PHOTO-CATHODE
90 ±
3
113
MA
X.
56.5 ± 0.5
12
3
4
56
7 89
10
11
12
1314
DY1IC
P
DY3
DY4
DY5DY6 IC
IC
DY7
DY8
DY2
GK
14 PIN BASEJEDEC No. B14-38
123
4567
98
11121314
151617
1819
2021
DY1DY3
IC
DY2
P
DY5DY7
DY8IC
IC IC DY6IC
ICDY4
IC
IC
IC
ICIC
K
10
21 PIN BASE
46 MIN.FACEPLATE52 ± 1
112
± 2
13 M
AX
.
PHOTO-CATHODE
123
4567
98
11121314
151617
1819
2021
DY1DY3
DY5
DY2
P
DY7
DY9
DY10IC
IC IC DY8DY6
ICDY4
IC
IC
ICIC
ICK
10
123
4567
98
11121314
151617
1819
2021
DY1DY3
DY5
DY2
P
DY9DY7
DY11
DY12IC
IC IC DY10DY8
DY6DY4
IC
ICIC
ICK
10
R7723
R7724/-100 R7725
BOTTOM VIEW
8 97
5
34
21 18
13
1415
1110DY6
DY2
DY5
DY4
DY11
DY12
DY3 P
DY7 DY8
DY1
DY10DY9
K
BASING DIAGRAM
45 MIN.
53.0 ± 0.5
55.0 ± 0.5
57.0 ± 0.5
29.5
± 0
.59
MA
X.
32 ±
170
± 1
0
P.C.D. 34.0 ± 0.3SEMI-FLEXIBLE LEADS (Ni PLATING)18- 0.75 ± 0.10
PHOTOCATHODE
METAL (CONNECTED WITH CATHODE)(Ni PLATING)
45 MIN.
47.0 ± 0.5
34.0 ± 0.3
20°
8.5
MA
X.
BOTTOM VIEW
8 97
5
34
21 18
13
1415
1110DY6
DY2
DY5
DY4
DY11
DY12
DY3 P
DY7 DY8
DY1
DY10DY9
K
BASING DIAGRAM
47.0 ± 0.5
34.0 ± 0.3
20°
8.5
MA
X.
45 MIN.
50.5 ± 0.5
55.6 ± 0.5
57.0 ± 0.5
31.0
± 0
.59
MA
X.
32.5
± 1
.070
± 1
0
PHOTOCATHODE
METAL (CONNECTED WITH CATHODE)(Ni PLATING)
SEMI-FLEXIBLE LEADS (Ni PLATING)
45 MIN.
4
12
13
14
15
17
5
12
79
11
18
DY5
DY1
DY7
DY3
PAcc
DY8
DY6
DY4
DY4
DY2
GK
IC
DY3
IC
DY5
DY7
IC
1617
181920
1514
131211109
87
654
32 1
DY6DY8Acc
PIC
IC
DY1
DY4
DY4
DY2
GIC
IC
K
BBOTTOM VIEW
AGLASS BASE
ATEMPORARY BASE REMOVED
112
± 2
13 M
AX
.
LEAD
LEN
GTH
70
MIN
.
46 MIN.
51 ± 1
PHOTO-CATHODE
FACEPLATE
SEMIFLEXIBLELEADS
A
B
20 PIN BASEJEDECNo. B20-102
51.2 ± 0.5
(34)
20°
36
#7 R13435 #8 R6232
#9 R1307 $0 R6091
$1 R6233, R6233-100 $2 R11065, R11410
TPMHA0510EATPMHA0627EA
TPMHA0078EA TPMHA0285EE
TPMHA0389EB TPMHA0573EA
12
3
4
56
7 89
10
11
12
1314
DY1IC
P
DY3
DY4
DY5DY6 IC
IC
DY7
DY8
DY2
GK
59.5 ± 0.5
55 MIN.
100
± 3
123
MA
X.
56.5 ± 0.5
51.5 ± 1.5
FACEPLATE
PHOTO-CATHODE
14 PIN BASEJEDECNo. B14-38
12
3
4
56
7 89
10
11
12
1314
DY1DY2
IC
DY4
DY5
DY6DY7 DY8
IC
IC
P
DY3
GK
76.0 ± 0.8
70 MIN.
127
± 3
150
MA
X.
56.5 ± 0.5
51.5 ± 1.5
FACEPLATE
PHOTO-CATHODE
14 PIN BASEJEDECNo. B14-38
* CONNECT SH TO DY5
76 ± 1
65 MIN.
137
± 2
FACEPLATE
PHOTO-CATHODE
13 M
AX
.
123
4567
98
11 12 1314
151617
1819
2021
DY1DY3
DY5
DY2
P
DY9DY11
DY12IC
SH IC DY10DY8
DY6DY4
DY7
G
IC
ICIC
K
10
SHORT PIN
51.5 ± 1.521 PIN BASE
76.0 ± 0.8
70 MINFACEPLATE
PHOTO-CATHODE
100
± 3
123
MA
X.
56.5 ± 0.5
14 PIN BASEJEDECNo. B14-38
51.5 ± 1.5
12
3
4
56
7 89
10
11
12
1314
DY1IC
P
DY3
DY4
DY5DY6 IC
IC
DY7
DY8
DY2
GK
ATEMPORARY BASE REMOVED
BBOTTOM VIEW
P
DY3DY5
DY7
DY9
DY11
DY12IC IC DY10IC
DY8
DY6
DY4
DY2
GIC
ICKDY1
10 11
1 20
129
192
8 13
3 18
147
174
6 15165
P
DY3DY5
DY7
DY9
DY11
DY12IC IC DY10IC
DY8
DY6
DY4
DY2
GIC
ICKDY1
10 11
1 20
129
192
8 13
3 18
147
174
6 15165
53.3 ± 1.0
( 64 MIN.)
76 ± 1
77.5 ± 1.0
123.
0 ±
1.5
LEA
D L
EN
GT
H 6
5 M
IN.
15 M
AX
.
51.2 ± 0.5
PHOTOCATHODE
METAL TUBE(Ni PLATING)
20 PIN BASEJEDEC No. B20-102
Note: E678-20B will be supplied with PMT
Operating Ambient Temperature for JEDEC BASE and E678-20B: -30 °C to +50 °C
A
B
SEMIFLEXIBLELEADS(Ni PLATING)
4 14
152
1
3
5 13
712
1198
18 17DY1
DY3
DY5
DY7
DY9
PIC Acc
DY10
DY8
DY6
DY4
DY2
GK
BBOTTOM VIEW
AGLASS BASE
ATEMPORARY BASE REMOVED
DY1
DY3
DY5
DY7
DY9
PIC
IC Acc
ICIC
ICK
11 1213
14
DY10DY8
DY6
DY4
DY2
IC
G
15
1617
1819
2023
45
67
89 10
1
13 M
AX
.
120
± 2
LEA
D L
EN
GT
H 7
0 M
IN.
46 MIN.
52 ± 1
PHOTOCATHODE
FACEPLATE
SEMIFLEXIBLELEADS
51.2 ± 0.5
20 PIN BASEJEDECNo. B20-102
A
B
(34)
20°
7.5
MA
X.
(Unit: mm)
37
TPMHA0615EB
TPMHA0628EA
$3 R12199
$5 R10806, R10806-100 $6 R877, R877-100
$8 R6594
TPMHA0074EC
TPMHA0373EFTPMHA0018EE
$7 R1250
TPMHA0580EB
$4 R10233, R10233-100
12
3
4
56
7 89
10
11
12
1314
DY1IC
P
DY3
DY4
DY5DY6 IC
IC
DY7
DY8
DY2
GK
85 MIN.
90 MIN.
104.
5 ±
3.0
127.
5 M
AX
.
56.5 ± 0.5
51.5 ± 1.5
FACEPLATE
PHOTO-CATHODE
14 PIN BASEJEDECNo. B14-38
12
3
4
56
7 89
10
11
12
1314
DY1DY2
IC
DY4
DY5
DY6DY7 DY8
DY9
DY10
P
DY3
GK
133.0 ± 1.5
111 MIN.
171
± 3
194
MA
X.
FACEPLATE
PHOTO-CATHODE
14 PIN BASEJEDECNo. B14-38
56.5 ± 0.5
55 MAX.
10
12
34567
89 11 12
13141516
1718
1920G2 & DY1
DY3DY5
DY7
DY9
DY11
DY13IC P
IC KG1
DY2
DY4DY6
DY8DY10
IC
DY12DY14
133 ± 2
120 MIN.
259
± 5
276
± 5
51.2 ± 0.5
HA TREATMENT
20 PIN BASEJEDECNo. B20-102
FACEPLATE
PHOTO-CATHODE
78.0 ± 1.5
54.0 ± 1.5
10
123
4567
89 1112
13141516
1718
1920
G3DY3
DY5
DY7
NC
DY9P
NC NC
DY1 KG2
G1
DY4
NCDY6
DY8
DY2
DY10NC
12
4
78
9 10
615
14
16
1920
2123G3
DY3
DY5
DY7DY9
P
DY1 K G2
G1
DY4DY6
DY8
DY2
DY10
B BOTTOM VIEW
A TEMPORARY BASE REMOVED
84.5 ± 2
PHOTOCATHODE
R82
.5
178
± 2
LEA
D L
EN
GTH
70
MIN
.
265
MA
X.
20 PIN BASEJEDEC No. B20-102
51.2 ± 0.5
13 M
AX
.
128 ± 2
110 MIN.
A
B
SEMIFLEXIBLELEADS
12
3
4
56
7 89
10
11
12
1314
ICDY1
DY10
DY3
DY4
DY5DY6 DY7
IC
DY8
DY9
DY2
PK
72 MIN.
80 MIN.
115
± 3
138
MA
X.
56.5 ± 0.5
PHOTO-CATHODE
14 PIN BASEJEDECNo. B14-38
R50
51.9 ± 2.0
12
3
4
56
7 89
10
11
12
1314
DY1IC
P
DY3
DY4
DY5DY6 IC
IC
DY7
DY8
DY2
GK
102 ± 1
95 MINFACEPLATE
PHOTO-CATHODE
119
± 3
138
MA
X.
56.5 ± 0.5
14 PIN BASEJEDECNo. B14-38
55 MAX.
38
%0 R5912, R5912-20, R5912-100
%1 R7081, R7081-20, R7081-100 %2 R12860
%3 R8520-406, -506 %4 R7600U, R7600U-100/-200/-300
TPMHA0501EC TPMHA0630EA
TPMHA0500EC
TPMHA0575EA TPMHA0278EJ
(Bottom view)
R5912/-100
20-PIN BASEJEDEC No. B20-102
84.5 ± 2.0
10
12
34567
89 11 12
13141516
1718
1920G3
DY3DY5DY7
IC
DY9P
IC IC
DY1 KG2
DY2
DY4
ICDY6
DY8
G1
DY10IC
(Bottom view)
R5912-20
10
12
34567
89 11 12
13141516
1718
1920DY3
G3DY5DY7
DY9
DY11DY13
P IC
DY1 KG2
DY4
G1
DY6DY8
DY10
DY2
DY12DY14
51.2 ± 0.5
220
± 5
250
± 7
275
MA
X.
190 MIN.
202 ± 5INPUT WINDOW
R131
PHOTOCATHODE
IC: Internal connection(Do not use)
(Bottom View)
R7081/-100
20-PIN BASEJEDEC No. B20-102
84.5 ± 2.0
10
12
34567
89 11 12
13141516
1718
1920G3
DY3DY5DY7
IC
DY9P
IC IC
DY1 KG2
DY2
DY4
ICDY6
DY8
G1
DY10IC
(Bottom View)
R7081-20
10
12
34567
89 11 12
13141516
1718
1920DY3
G3DY5DY7
DY9
DY11DY13
P IC
DY1 KG2
DY4
G1
DY6DY8
DY10
DY2
DY12DY14
51.2 ± 0.5
245
± 5
300
MA
X.
275
± 7
220 MIN.
253 ± 5
INPUT WINDOW
R136.7
PHOTOCATHODE
IC: Internal Connection(Do not use)
BASING DIAGRAM
KDyPCUTIC
: Photocathode: Dynode: Anode: Cut Pin: Internal connection (Don't use)
CUT (Dy10)
CUT (Dy10)
PCUT (Dy10)
CUT (Dy10)
ICIC
1 2 3 4 5 6 7 8 923 1022
21 11252420 1219 18 17 16 1514 13
G CU
T (
Dy1
0)K D
y1D
y2D
y3D
y4C
UT
(D
y10)
CU
T (
G)
CU
T (
G)
Dy1
0D
y9D
y8D
y7D
y6D
y5C
UT
(D
y10)
CU
T (
G)
2.54 PITCH
8×2.54=20.32
10.16
5.08
20.3
2
15.2
4
GUIDE MARK
45° ± 10°
25- 1.5EFFECTIVE AREA
28.25 ± 1.00 7.0 ± 0.5
1.2 5 MAX.
13-
0.4
55
MA
X.
1.2 MAX.2.5 MAX.
24
QUARTZ GLASS
AL RING
Ni PLATING
PHOTOCATHODE
4-R3.2
SIDE VIEW BOTTOM VIEWTOP VIEW
20.5 MIN.
25.7 ± 0.4
SIDE VIEW BOTTOM VIEWTOP VIEW
0.6 ± 0.4
22.0 ± 0.5
30.0 ± 0.5
18 MIN.
4.4 ± 0.7
12.0
± 0
.5
PHOTOCATHODE
INSULATIONCOVER
2.54 PITCH
29- 0.45
EFFECTIVE AREA
25.7 ± 0.5
BASING DIAGRAM
KDyPCUTIC
: Photocathode: Dynode: Anode: Short pin: Internal connection (Don't use)
ICICP
ICICICIC
ICICICICICICIC
1 2 3 4 5 6 7 8 932 1031 1130 1229 1328 1427 1526 1625 1724 23 22 21 2019 18
K IC (
Dy1
0)IC D
y1D
y2D
y3D
y4IC
(D
y10)
CU
T (
K)
CU
T (
K)
Dy1
0D
y9D
y8D
y7D
y6D
y5IC
(D
y10)
CU
T (
K)
GUIDECORNER
4 MAX.
TPMHA0629EA
$9 R11833-03, R11833-100-03
12
3
4
56
7 89
10
11
12
1314
DY1DY2
DY2
DY7
IC
PIC DY8
DY6
IC
DY4
DY3
GK
134 ± 2
111 MIN.
142
± 3
165
MA
X.FACEPLATE
PHOTO-CATHODE
14 PIN BASEJEDECNo. B14-38
56.5 ± 0.5
55 MAX.
HA TREATMENT
10
12
34567
89 11 12
13141516
1718
1920IC
DY2DY4
DY6
DY8
DY10ICACC IC
IC KG
IC
DY1
DY3
DY5DY7
IC
DY9P
460 MIN.
508 ± 8
210
65
610
± 1
0
640
± 1
0
660
MA
X.
51.2 ± 0.5
254 ± 8
75 ± 220-PIN BASEJEDEC No. B20-102
R32
5
R22
5
(Unit: mm)
39
%5 R7600U-00-M4, R7600U-100-M4/-200-M4/-300-M4
TPMHA0298EH
TPMHA0577EBTPMHA0539EC
TPMHA0297EJ
%6 R5900U-00-L16, R5900U-100-L16/-200-L16
%7 R9880U-110, R9880U-210 %8 R11265U-100, R11265U-200, R11265U-300
^0 R7761-70
TPMHA0469EETPMHA0236EB
%9 R5505-70
K CU
T (
IC)
CU
T (
IC)
Dy1
Dy2
Dy3
Dy4
CU
T (
IC)
CU
T (
K)
CU
T (
K)
Dy1
0D
y9D
y8D
y7D
y6D
y5C
UT
(IC
)C
UT
(K
)
GUIDECORNER
12.0
± 0
.5
SIDE VIEW BOTTOM VIEW
TOP VIEW
CUT (IC)P1
CUT (IC)CUT (IC)CUT (IC)
P4CUT (IC)
CUT (IC)P2CUT (IC)CUT (IC)CUT (IC)P3CUT (IC)
25 1724 23 22 21 2019 18
10111213141516
1 2 3 4 5 6 7 8 932313029282726
P1
P4
P2
P3
15- 0.454 MAX.
0.6 ± 0.4
22.0 ± 0.5 4.4 ± 0.7
PHOTO-CATHODE
2.54 PITCH
20.32
20.3
2
BASING DIAGRAM
KDyPCUTIC
: Photocathode: Dynode: Anode: Short pin: Internal connection (Do not Use)
18 M
IN.
18 MIN.
30.0 ± 0.5
18 MIN.
25.7 ± 0.5
INSULATION COVER
PHOTOCATHODE
GUIDECORNER
1 2 3 4 5 6 7 8 910
1112
1314
1516
17181920212223242526
2728
2930
3132
Dy8
CU
T (
K)
P12
P10 P8
P6
P4
Dy5 K
Dy1Dy3ICP2P1P3Dy9
Dy7
CU
T (
K)
P5
P7
P9
P11
P13
Dy6
K
Dy2Dy4
ICP15
P14P16
Dy10
PHOTO-CATHODE
PHOTOCATHODE
INSULATION COVER
12.0
± 0
.5
4 MAX.
0.6 ± 0.4.
22.0 ± 0.5 4.4 ± 0.7
30.0 ± 0.5
15.8
25.7 ± 0.5
16
P16
15.8
0.81.0 PITCH
30- 0.45
2.54 PITCH
20.32
20.3
2
P1
KDyPCUTIC
: Photocathode: Dynode: Anode: Short pin: Internal connection (Do not use)
SIDE VIEW BOTTOM VIEW
TOP VIEW
BASING DIAGRAM
25.8 ± 0.7
17.5 MIN.
40.0
± 1
.513
MA
X.
FACEPLATE
PHOTO-CATHODE
HA TREATMENT
17 PIN BASE
1716
1514
1312
1011
987
65
4
32
1
P
DY 4DY 6
DY 8
DY 7
DY 5
DY 3
K
DY 15DY 13
DY 14
DY 10
DY 1
DY 11DY 12
DY 2
DY 9
SHORT PIN
DY1DY3
DY5
DY7
DY9
DY11DY13
DY15DY17 DY19 P
DY18DY16
DY14
DY12
DY10
DY8
DY6DY4
DY2K
11 1213
14151617
1819
20211
23
4567
89
10
GLASS BASE
HA TREATMENT
(360/22)°
(27)
FACEPLATE
PHOTO-CATHODE
39 ± 1
27 MIN.
50 ±
2
LEA
D L
EN
GT
H 4
5 M
IN.
13 M
AX
.
27
SEMIFLEXIBLELEADS
BOTTOM VIEWSIDE VIEW
1 2 3
9 8 7
4
5
6
12
11
10
DY
7
DY
5
DY
3
DY
8
DY
6
DY
4
DY10
P
DY9
DY2
DY1
K
WIN
DO
W 9
.4 ±
0.3
16.
0 ±
0.3
12.4 ± 0.4 4.6 ± 0.8
0.5 ± 0.2
INSULATION COVER
PHOTOCATHODE
GUIDE MARK
12- 0.45
5.08
10.16
5.08
10.1
6
GUIDE MARK
EFFE
CTIV
EAR
EA
8.0
Dy5Dy6
IC (P)
IC (P)K
Dy1P
Dy7
Dy12Dy11Dy10IC (P)
IC (P)
Dy9Dy8
Dy2Dy3
IC (P)Dy4
789101112131415
282726252423222120
122.95
22.564-R3.5
2.22
PIT
CH
22.2
12.0
± 0
.5
18.7 ± 0.5 3.5 ± 0.7
0.6 ± 0.4
4.2 MAX.
23
30.0 ± 0.5
26.2+0 -0.5
EFFECTIVE AREA
19- 0.45
PHOTOCATHODE
SIDE VIEW BOTTOM VIEWTOP VIEW
4-R1.35
BASING DIAGRAM
KDyPIC
: Photocathode: Dynode: Anode: Internal connection (Don't use)
40
^2 R2248
^3 R6236 ^4 R6237
^5 R1548-07 ^6 R8997
TPMHA0392EB
TPMHA0098EC
TPMHA0393EC
TPMHA0511EA TPMHA0552EC
12
3
4
56
7
8
9
1011
IC
DY1
DY3
DY5
DY7P
DY8
DY6
DY4
DY2
K
FACEPLATE
PHOTOCATHODE
8 MIN.
9.8 ± 0.4
8 M
IN.
10 M
AX
.
11 PIN BASE
45.0
± 1
.5
9.8
± 0
.4
SHORT PIN
54 M
IN.
59.5
± 1
.0
59.5 ± 1.0
54 MIN.
56.5 ± 0.5
100
± 3
123
MA
X.
51.5 ± 1.5
12
3
4
56
7 89
10
11
12
1314
DY1IC
P
DY3
DY4
DY5DY6 IC
IC
DY7
DY8
DY2
GK
FACEPLATE
PHOTO-CATHODE
14 PIN BASEJEDECNo. B14-38
12
3
4
56
7 89
10
11
12
1314
DY1IC
P
DY3
DY4
DY5DY6 IC
IC
DY7
DY8
DY2
GK
56.5 ± 0.5
100
± 3
123
MA
X.
51.5 ± 1.5
70 MIN.
76 ± 1.5
76 ±
1.5
70 M
IN.
FACEPLATE
PHOTO-CATHODE
14 PIN BASEJEDECNo. B14-38
IC
DY3 IC
DY7-1
DY9
DY7-2
DY6
DY4
DY2DY5
ICK
P1P2 DY10
SHORT PIN
DY8
DY1 12
3
45
67
8 9 1011
12
1314
1516
17
24.0 ± 0.5FACEPLATE
PHOTOCATHODE
70 ±
213
MA
X.
17 PIN BASE
8 MIN. 8 MIN.
18 M
IN.
24.0
± 0
.5
^1 R5924-70
TPMHA0490EC
DY1DY3DY5DY7
DY9DY11
DY13
DY15
DY17
DY19P
DY18 DY16DY14
DY12DY10
DY8
DY6
DY4
DY2
K
26
222120
1918
17161514
1110
9876
54
3 2 1
HA TREATMENT
GLASS BASE
(360/26)°
(31)
FACEPLATE
PHOTO-CATHODE
52 ± 1
39 MIN.
50 ±
2
LEA
D L
EN
GT
H 8
0 M
IN.
13 M
AX
.
31
SEMIFLEXIBLELEADS
5 15
4 16
1
7
14
813
20DY1
DY5
DY3
P-C
DY7-D
DY7-C
DY9
P-D
DY8DY10
DY7-A
DY7-B
P-A
P-B
DY6
DY2DY4
K
A GLASS BASE
A TEMPORARY BASE REMOVED
B BOTTOM VIEW
32
6
1918
17
1211
DY1
DY5DY3
P-C
DY7-D
DY7-C
ICIC
DY9
P-D
DY8DY10
DY7-A
DY7-B
P-A
P-B
DY6
DY2DY4
K
1 202 193 18
4 17
5
6
16
15
7 148 13
9 1210 11
18°
13 M
AX
.
84 ±
2LE
AD
LE
NG
TH
45
MIN
.
PHOTOCATHODE
FACEPLATE
SEMI-FLEXIBLELEADS
51.2 ± 0.5
20 PIN BASE JEDECNo. B20-102
A
B
38.8 ± 0.3
33 MIN.
16 MIN.
16 M
IN.
33 M
IN.
37.7 ± 1.0
( 26)
(Unit: mm)
41
^7 R10550
TPMHA0390EB
TPMHA0460EBTPMHA0391EB
TPMHA0576EC
^8 R6234
^9 R6235 &0 R7373A-01
TPMHA0507EA
&1 R8143
56.5 ± 0.5
59.5 ± 0.5
55 MIN.
100
± 3
123
MA
X.
60 M
IN.
67.5
± 0
.6
51.5 ± 1.5
12
3
4
56
7 89
10
11
12
1314
DY1IC
P
DY3
DY4
DY5DY6 IC
IC
DY7
DY8
DY2
GK
FACEPLATE
PHOTO-CATHODE
14 PIN BASEJEDECNo. B14-38
79 M
IN.
85 ±
1
56.5 ± 0.5
76.0 ± 1.5
70 MIN.
100
± 3
123
MA
X.
51.5 ± 1.51
2
3
4
56
7 89
10
11
12
1314
DY1IC
P
DY3
DY4
DY5DY6 IC
IC
DY7
DY8
DY2
GK
FACEPLATE
PHOTO-CATHODE
14 PIN BASEJEDECNo. B14-38
DY1
DY3
DY5
DY7
PDY9 DY10
DY8
DY6
DY4
DY2
3
4
56 10
11
12
13
14
17
K
A TEMPORARY BASE REMOVED
DY1
DY3
DY5
DY7
P
DY9
DY2
K1
2
3
4
56 7
8
9
10
1112
DY10
DY8
DY6
DY4
2
8
25.4 ± 0.5
13 M
AX
.
43.0
± 1
.5LE
AD
LE
NG
TH
50
MIN
.
R13 ± 1
PHOTOCATHODE
FACEPLATE
12 PIN BASE JEDECNo. B12-43
B BOTTOM VIEWA
B
37.3
SEMIFLEXIBLELEADS
2
3
4
56
7 89
10
11
12
14IC
DY3
DY2
DY7
DY9
DY11P DY10
DY8
DY6
DY4
DY5
KDY1
SHORT PIN
1
112
± 2
13 M
AX
.
20 M
IN.
28.5 ± 0.5
25 MIN.
PHOTOCATHODE
14 PIN BASE
13
HA TREATMENT
FACEPLATE
29.0 ± 0.7
5 15
4 16
1
7
14
89
13
20DY1
DY4
DY3
P-C
DY6-D
DY6-C
DY5DY7
P-D
DY8
DY6-A
DY6-B
P-A
P-B
DY4
DY2DY3
K
AGLASS BASE
ATEMPORARY BASE REMOVED
B BOTTOM VIEW
32
6
1918
17
11
DY1
DY4DY3
P-C
DY6-D
DY6-C
NCDY7
DY5
P-D
NCDY8
DY6-A
DY6-B
P-A
P-B
DY4
DY2DY3
K
1 202 193 18
4 17
5
6
16
15
7 148 13
9 1210 11
PHOTOCATHODE
FACEPLATE
SEMIFLEXIBLELEADS
20 PIN BASE JEDECNo. B20-102
A
B
38.8 ± 0.3
16 MIN.
16 M
IN.
33 M
IN.
37.7 ± 1.0
18°
( 26)
51.2 ± 0.5
13 M
AX
.
87.5
± 2
.0LE
AD
LE
NG
TH
45
MIN
.
42
&2 H8711, H8711-100, H8711-200, H8711-300 &3 H7546B, H7546B-100, H7546B-200, H7546B-300
TPMHA0223EC
TPMHA0586EA
TPMHA0487EE
TPMHA0550EB
&5 H11934-100, H11934-200, H11934-300&4 H8804, H8804-100, H8804-200, H8804-300
R12
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
R14
C2
C1
C3C4
KF
R17
R18
R34
R16
R15
Dy12
Dy11
Dy10
Dy9
Dy8
Dy7
Dy6
Dy5
Dy4
Dy3
Dy2
Dy1
AN
OD
E15
OU
TP
UT
AN
OD
E16
OU
TP
UT
GN
D
-HV
INP
UT
GN
D
P15 P16
R13
DY
12 O
UT
PU
TG
ND
GN
D
AN
OD
E1
OU
TP
UT
AN
OD
E2
OU
TP
UT
GN
D
GN
D
GN
D
P1 P2
GN
D
AN
OD
E9
OU
TP
UT
TE
RM
INA
L P
INS
TE
RM
INA
L P
INS
TE
RM
INA
L P
INS
P9
AN
OD
E8
OU
TP
UT
P8
TE
RM
INA
L P
INS
R1 to R3R4 to R13
R14R15 to R17
R18C1 to C4
: 360 kΩ: 180 kΩ: 1 MΩ: 51 Ω: 10 kΩ: 0.01 μF
12
34
1314
1516
GN
D
GN
D-H
VD
Y
P8
P1
P16
P9
4 × 164.5 PITCH
4- 0.3GUIDE MARKS
25.7 0.
3
4.2
TOP VIEW
25.7
18.1
30.0 ± 0.5
SIDE VIEW
BOTTOM VIEW
45.0
± 0
.8
0.8
MA
X.
2.8
DIVIDER ASSEMBLY
POM CASE
INSULATINGTAPE
PMT:R7600-M16 SERIES
2.54
× 7=
17.7
8
2.54
12.7
7.62
2.545.082.54
Dy12 OUTPUT TERMINAL PIN ( 0.46)
-HV INPUTTERMINAL PINS ( 0.46)
ANODE OUTPUTTERMINAL PIN( 0.46,2.54 PITCH 8 × 4)
4-SCREWS (M2)
P64
P57
P8P1
P1
P8
P9
P16
P17
P24
P25
(PINS CONNECTION: BOTTOM VIEW)
*A: THROUGH HOLE (NO CONNECTION)
P32
P33
P40
P41
P48
P49
P56
P57
GND-HV
*A
GND
DY12OUT
P64
12
34
56
78
5758
5960
6162
6364
BOTTOM VIEW
DY12 OUTPUT TERMINAL PIN ( 0.64)TS-101-T-A-1, SAMTEC
GND TERMINAL PIN ( 0.64)TS-101-T-A-1, SAMTEC
ANODE OUTPUT TERMINAL PINS( 0.64, 2.54 PITCH, 8 × 8)TD-108-T-A-1, SAMTEC × 4 PCS
-HV TERMINAL PINS ( 0.64)ASP-23882-A-1, SAMTEC
0.3
24- 0.3GUIDE MARKS
2- 3.5
25.7
FILLED WITH INSULATOR
45.0 ± 0.8
5.2
4.2
SIDE VIEW
30.0
± 0
.5
2.54×
7=17
.78
2.54
POM CASE
DIVIDER ASSEMBLY
PMT: R7600-M64 SERIES
TOP VIEW
45
0.95
X
Y
4- 0.3GUIDE MARKS
40.0
± 0
.3
48.0
± 0
.5
30+0.5 -0
5+0.5 -0
2.54×9=22.86
2.54
4-SCREWS (M2)
FK
R21
R1 R2 R3
Dy1 Dy2 Dy3 Dy4 Dy5 Dy6 Dy7 Dy8 Dy9 Dy10 Dy11 Dy12
R4 R5 R6 R7 R8 R9 R10 R11 R12 R13
C1 C3
C4
R14
R17 R18 R19 R20
R15 R16
-HV INPUT TERMINAL PIN( 0.64)
P1P2P63P64
AN
OD
E1
OU
TP
UT
AN
OD
E2
OU
TP
UT
AN
OD
E63
OU
TP
UT
AN
OD
E64
OU
TP
UT
Dy1
2 O
UTP
UT
TER
MIN
AL
PIN
( 0
.64)
2.54 PITCH( 0.64) 8 × 8
GN
D T
ER
MIN
AL
PIN
( 0
.64)
× 2
......
R1, R5 to R14R2 to R4, R15
R16R17 to R19
R20R21
C1 to C3C4
: 100 kΩ: 200 kΩ: 300 kΩ: 51 Ω: 10 kΩ: 1 MΩ: 22 nF: 10 nF
C2
12345678
5758596061626364
25.7
18.1
45
P8 P1
P64 P57
0.95
F
K R21 R1
R2
R3Dy1
Dy2
Dy3
Dy4
Dy5
Dy6
Dy7
Dy8
Dy9
Dy10
Dy11
Dy12
R4
R5
R6
R7
R8
R9
R10
R11
R12
R13
C1
C2
C3C4
R14
R17
R18
R19
R20
R15
R16
-HV INPUT TERMINAL PIN( 0.64)
P1
P2
P63
P64
ANODE1 OUTPUT
ANODE2 OUTPUT
ANODE63 OUTPUT
ANODE64 OUTPUT
Dy12 OUTPUTTERMINAL PIN ( 0.64)
2.54 PITCH( 0.64)8 × 8
GND TERMINAL PIN( 0.64) × 2
......
R1, R5 to R14R2 to R4, R15
R16R17 to R19
R20R21
C1 to C3C4
: 100 kΩ: 200 kΩ: 300 kΩ: 51 Ω: 10 kΩ: 1 MΩ: 22 nF: 10 nF
4- 0.3 GUIDE MARKS
ANODE OUTPUT TERMINAL PINS ( 0.64) 2.54 PITCH 8 × 8
4-SCREWS (M2) -HV INPUT TERMINAL PINS( 0.64)
GND TERMINAL PIN ( 0.64)
Dy12 OUTPUTTERMINAL PIN( 0.64)
POM CASE
SOFT TAPE
PMT:R7600-M64 SERIES
4- 0.3GUIDE MARKS
X
Y
30.0 ± 0.5
0.3 2
0.8
MA
X.
45 ±
0.8
4.2
5.2
2.54×7=17.78
2.54
2.54
×9=2
2.86
2.54
TOP VIEW
SIDE VIEW
BOTTOM VIEW
R1R2, R7 to R14
R3, R4R5, R6
R15R16 to R18
R19C1 to C3
: 300 kΩ: 200 kΩ: 130 kΩ: 160 kΩ: 100 kΩ: 51 Ω: 1 MΩ: 0.01 μF
DY1 DY2 DY3 DY4 DY5 DY6 DY7 DY8 DY9 DY10 DY11 DY12
K P
R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14 R15
C1 C2 C3
R18R16R19
R17
SIGNAL OUTPUTRG-174/U (BLACK)
-HVRG-174/U (RED)
NOTE: DIVIDER RATIO=2.5: 1.3: 0.8: 0.8: 1: 1: .....1: 0.5TOTAL RESISTANCE=2.78 MΩ, DIVIDER CURRENT=359.7 μA at -1000 V (MAX.)
30.0 ± 0.5
26.2 32.5 ± 0.50.8 MAX. 10 51500+50 -0
23
MIN
.PH
OTO
CAT
HO
DE
SIG
-HV
POM CASE 5-SCREWS(M2)
-HV: RG-174/U (RED)
SIGNAL OUTPUT: RG-174/U (BLACK)
TOP VIEW SIDE VIEW BOTTOM VIEW
(Unit: mm)
43
TPMHA0591EA
TPMHA0592EA
TPMHA0623EA
&6 H13226A-100, H13226A-200 &7 H12445-100, H12445-200
&8 H12428-100, H12428-200
R1, R3R2
R4 to R14R15
: 240 kΩ: 220 kΩ: 200 kΩ: 100 kΩ
R16 to R18R19
C1 to C3
: 51 Ω: 1 MΩ: 0.01 μF
DY1 DY2 DY3 DY4 DY5 DY6 DY7 DY8 DY9 DY10 DY11 DY12
K GR
P4
R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14 R15
C1 C2 C3
R18R16R19
R17
ANODE4 OUTPUTRG-174/U (BLACK)
-HVRG-174/U
(RED)
NOTE: DIVIDER RATIO=2.3: 1.2: 1: 1: .....1: 0.5TOTAL RESISTANCE=3 MΩ, DIVIDER CURRENT=367 μA at -1000 V (MAX.)
P3ANODE3 OUTPUTRG-174/U (BLACK)
P2ANODE2 OUTPUTRG-174/U (BLACK)
P1ANODE1 OUTPUTRG-174/U (BLACK)
41
1613
23
P1
P4
P5
P8
P9
P12
P13
P16
GN
D
GN
D-H
V
DY
12
(PIN CONNECTION: BOTTOM VIEW)
*A: THROUGH HOLE (NO CONNECTION)
5.085.08
2.54 × 3=7.62
2.54
× 3
=7.
62
39.0 ± 0.8
1 REF. 4.2
5.75
× 4
=23
23.55
26.2
5.75 × 4=23
30.0 ± 0.5
0.275POM CASE
P1
P2
P3
P4
GND
*A
DY12
-HV
*A
GND
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
P15
P16
GUIDEMARK
SIDE VIEWTOP VIEW BOTTOM VIEW
PH
OTO
CA
THO
DE
23
MIN
.
-HV TERMINAL PIN ( 0.64)ASP-23882-A-1, SAMTEC
ANODE OUTPUT TERMINAL PIN ( 0.64, 2.54 PITCH, 4 × 4)TD-104-T-A-1, SAMTEC × 2 PCS
DY12 OUTPUTTERMINAL PIN ( 0.64)ASP-23882-A-1, SAMTEC
4-SCREW(M2)
P64 ANODE64 OUTPUT
ANODE63 OUTPUTP63
P2 ANODE2 OUTPUT
ANODE1 OUTPUTP1
TERMINAL PIN (2.54 mm PITCH, 0.64, 8 × 8)
C1 C2 C3
DY1
K GR
DY2
R1 R2 R3
DY3
R4
DY4
R5
DY5
R6
DY6
R7
DY7
R8
DY8
R9
DY9
R10
DY10
R11
DY11
R12
DY12
R13
R20R16 R17 R18
R14 R15
C4
R19
R1, R3R2
R4 to R14R15
: 240 kΩ: 220 kΩ: 200 kΩ: 100 kΩ
R16 to R18R19R20
C1 to C4
: 51 Ω: 10 kΩ: 1 MΩ: 0.01 μF
-HV TERMINAL PIN ( 0.64)
GND TERMINAL PIN ( 0.64)
GND TERMINAL PIN ( 0.64)
DY12 OUTPUTTERMINAL PIN ( 0.64)
81
6457
45
1213
*A: THROUGH HOLE (NO CONNECTION)
P8P1GN
D
GND
P64
DY
-HV
P57
P1
P8
P9
P16
P17
P24
P25
(PINS CONNECTION: BOTTOM VIEW)
P32
P33
P40
P41
P48
P49
P56
P57
GND
*A
GND
-HV
DY12OUT
P64
2.54
2.54 × 9=22.8639.0 ± 0.8
1 REF. 4.2
2.88
× 8
=23.
04
2.54
× 7
=17
.78
2.54
26.2
2.88 × 8=23.04
30.0 ± 0.5
0.25POM CASE
INSULATING TAPE
GUIDEMARK
SIDE VIEWTOP VIEW BOTTOM VIEW
PH
OTO
CA
THO
DE
23
MIN
.
-HV TERMINAL PIN ( 0.64)ASP-23882-A-1, SAMTEC
4-SCREW (M2)
ANODE OUTPUT TERMINAL PIN ( 0.64, 2.54 PITCH, 8 × 8)TD-108-T-A-1, SAMTEC × 4 PCS
GND TERMINAL PIN ( 0.64)TS-101-T-A-1, SAMTEC
DY12 OUTPUT TERMINAL PIN ( 0.64)TS-101-T-A-1, SAMTEC
&9 H10515B-100, H10515B-200
TPMHA0534EB
P15 P16
P13 P14
P11 P12
P9 P10
P7 P8
P5 P6
P3 P4
P1 P2
TOP VIEW
BOTTOM VIEW
P16
P15
P2 P1
R1R8K
DY1R2
DY2R3
DY3R4
DY4R5
DY5R6
DY6R7
DY7
R9DY8
R10DY9
R11DY10
ACTI
VE V
OLT
AGE
DIVI
DER
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
P15
P16
GND
-HV AN
ODE
OUTP
UT
ANOD
E OU
TPUT
G
P16
P15
P2 P1
P4 P3
P6 P5
P8 P7
P10
P9
P12
P11
P14
P13
GND
-HV
24
2.54
× 7=
17.7
8
6.35 2.54
24
30.0 ± 0.5
45.0
± 0
.55.
70.
8 M
AX
.
POM CASE
4-SCREW (M2)
PMT:R5900 SERIES
16
0.64
ANODE OUTPUT
R1 to R7R8
R9 to R11
: 220 kΩ: 1 MΩ: 51 Ω
DIVIDER CURRENT: 0.37 mA (at -900 V)
15.8
1.0
PIT
CH
0.8 16
PHOTO-CATHODEP1
P16
SIDE VIEW
GND INPUTTERMINAL PIN ( 0.46)
-HV INPUTTERMINAL PIN ( 0.46)
ANODE #1 to #16OUTPUT ( 0.46)
-HV INPUTTERMINAL PIN
GNDTERMINAL PIN
ANODE OUTPUT TERMINAL PIN(BDL-108-G-F, Mfg. SAMTEC)
30.0 ± 0.5
26.2 32.5 ± 0.50.8 MAX. 10 5450+20 -0
23
MIN
.P
HO
TOC
ATH
OD
E
SIG-HV
P4SIGP1
SIGP3
SIGP2
POM CASE 5-SCREWS(M2)
-HV: RG-174/U (RED)
SIGNAL OUTPUT: RG-174/U (BLACK)
14
23
TOP VIEW SIDE VIEW BOTTOM VIEW
C1 C2 C3
R1, R3R2
R4 to R14R15
: 240 kΩ: 220 kΩ: 200 kΩ: 100 kΩ
R16 to R18R19R20
C1 to C4
: 51 Ω: 10 kΩ: 1 MΩ: 0.01 μF
DY1
K GR
DY2
R1 R2 R3
DY3
R4
DY4
R5
DY5
R6
DY6
R7
DY7
R8
DY8
R9
DY9
R10
DY10
R11
DY11
R12
DY12P16
TERMINAL PIN (2.54 mm PITCH, 0.64, 4 × 4)P15
P2
P1
R13
R20R16 R17 R18
R14 R15
C4
R19
DY12 OUTPUTTERMINAL PIN ( 0.64)
-HV TERMINAL PIN ( 0.64)
GND TERMINAL PIN ( 0.64)
GND TERMINAL PIN ( 0.64)
ANODE1 OUTPUT
ANODE2 OUTPUT
ANODE15 OUTPUT
ANODE16 OUTPUT
44
*0 H12700A, H12700A-10
*1 H12700B, H12700B-10
TPMHA0601EB
TPMHA0602EB
DY
10 O
UT
PU
T
SIG
NA
L G
ND
AN
OD
E O
UT
PU
T P
1
AN
OD
E O
UT
PU
T P
2
AN
OD
E O
UT
PU
T P
3
AN
OD
E O
UT
PU
T P
4
AN
OD
E O
UT
PU
T P
5
AN
OD
E O
UT
PU
T P
6
AN
OD
E O
UT
PU
T P
7
AN
OD
E O
UT
PU
T P
8
AN
OD
E O
UT
PU
T P
57
AN
OD
E O
UT
PU
T P
58
AN
OD
E O
UT
PU
T P
59
AN
OD
E O
UT
PU
T P
60
AN
OD
E O
UT
PU
T P
61
AN
OD
E O
UT
PU
T P
62
AN
OD
E O
UT
PU
T P
63
AN
OD
E O
UT
PU
T P
64
. .....
4-(DOUBLE-ROW 2 mm Pitch) CONNECTOR
P1
P2
P3
P4
P5
P6
P7
P8
P57
P58
P59
P60
P61
P62
P63
P64
ACTIVE VOLTAGEDIVIDER
K
R8R7R6R5R4R3R2R1
DY10DY9DY8DY7DY6DY5DY4DY3DY2DY1
GR
R21
R23
R22
R20R19R18R17R16
C4C3C2C1
C10
C12
C11
SHV-P(SHIELD CABLE, GRAY)
R1 to R8: 390 kΩR16, R20: 10 kΩR17 to R19: 51 ΩR21: 1 MΩR22, R23: 4.99 kΩ
DIVIDER CURRENT 225 µA at -1100 V
C1, C2: 0.01 µFC3: 0.022 µFC4: 0.033 µFC10: 0.01 µFC11, C12: 0.0015 µF
DY
10 O
UT
PU
T
SIG
NA
L G
ND
AN
OD
E O
UT
PU
T P
1
AN
OD
E O
UT
PU
T P
2
AN
OD
E O
UT
PU
T P
3
AN
OD
E O
UT
PU
T P
4
AN
OD
E O
UT
PU
T P
5
AN
OD
E O
UT
PU
T P
6
AN
OD
E O
UT
PU
T P
7
AN
OD
E O
UT
PU
T P
8
AN
OD
E O
UT
PU
T P
57
AN
OD
E O
UT
PU
T P
58
AN
OD
E O
UT
PU
T P
59
AN
OD
E O
UT
PU
T P
60
AN
OD
E O
UT
PU
T P
61
AN
OD
E O
UT
PU
T P
62
AN
OD
E O
UT
PU
T P
63
AN
OD
E O
UT
PU
T P
64
. .....
4-(DOUBLE-ROW 2 mm Pitch) CONNECTOR
P1
P2
P3
P4
P5
P6
P7
P8
P57
P58
P59
P60
P61
P62
P63
P64
ACTIVE VOLTAGEDIVIDER
K
R8R7R6R5R4R3R2R1
DY10DY9DY8DY7DY6DY5DY4DY3DY2DY1
GR
R21
R23
R22
R20R19R18R17R16
C4C3C2C1
C10
C12
C11
R1 to R8: 390 kΩR16, R20: 10 kΩR17 to R19: 51 ΩR21: 1 MΩR22, R23: 4.99 kΩ
DIVIDER CURRENT 225 µA at -1100 V
C1, C2: 0.01 µFC3: 0.022 µFC4: 0.033 µFC10: 0.01 µFC11, C12: 0.0015 µF
GND-HV
GNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGND*B
P7P8
P15P16P23P24P31P32P39P40P47P48P55P56P63P64
DY12GND
SIG4
GNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGND
P5P6P13P14P21P22P29P30P37P38P45P46P53P54P61P62GND*B
SIG3
GNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGND*B
GND
P3P4
P11P12P19P20P27P28P35P36P43P44P51P52P59P60GNDGND
SIG2
CONNECTION FOR SIGNAL CONNECTORS(BOTTOM VIEW)
GNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGND
P1P2P9
P10P17P18P25P26P33P34P41P42P49P50P57P58*B
GNDSIG1
4.5 ± 0.342
12 × 3=36
51.0
± 0
.3
36
GN
DA
NO
DE
GN
DA
NO
DE
GN
DA
NO
DE
GN
DA
NO
DE
58.5
7.50
.49.
42.4
1.34
.33.
26.2
5.18
.17.
10.9
.2.1
60.5
9.52
.51.
44.4
3.36
.35.
28.2
7.20
.19.
12.1
1.4.
3
DY
.64.
63.5
6.55
.48.
47.3
9.32
.31.
24.2
3.16
.15.
8.7
62.6
1.54
.53.
46.4
538
.37
30.2
9.22
.21.
14.1
3.6.
5
SIG
4
SIG
3
SIG
2
SIG
1
4-SIGNAL OUTPUT CONNECTORHSA-200-D36P-Xmfg. JC ELECTRONICS CORPORATION
450
± 2
0
PH
OT
OC
AT
HO
DE
(E
FF
EC
TIV
E A
RE
A)
4
8.5
22
× 1
7=34
5
1.7
± 0
.3
16.4 ± 0.51.5 4
27.4 ± 0.932.7 ± 1.0
6 ×
6=
366.
256.
25
6 × 6=36 6.256.25
P1
P9
P17
P25
P33
P41
P49
P57
P2
P10
P18
P26
P34
P42
P50
P58
P3
P11
P19
P27
P35
P43
P51
P59
P4
P12
P20
P28
P36
P44
P52
P60
P5
P13
P21
P29
P37
P45
P53
P61
P6
P14
P22
P30
P38
P46
P54
P62
P7
P15
P23
P31
P39
P47
P55
P63
P8
P16
P24
P32
P40
P48
P56
P64
0
.5
NOTE *B: No pin.TOP VIEW SIDE VIEW
BOTTOM VIEW
-HV: SHV-P(SHIELD CABLE, GRAY)
M3 DEPTH 2.5INSULATING TAPE
PLASTIC BASE
PC BOARD
START MARK
51
.0+
0.5
-0.1
GNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGND*B
P7P8
P15P16P23P24P31P32P39P40P47P48P55P56P63P64
DY12GND
GNDGND
-HV-HV
SIG4
GNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGND
P5P6
P13P14P21P22P29P30P37P38P45P46P53P54P61P62GND*B
SIG3
GNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGND*B
GND
P3P4
P11P12P19P20P27P28P35P36P43P44P51P52P59P60GNDGND
SIG2
CONNECTION FOR SIGNAL CONNECTORS(BOTTOM VIEW)
GNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGNDGND
P1P2P9
P10P17P18P25P26P33P34P41P42P49P50P57P58*B
GNDSIG1
4.5 ± 0.342
12 × 3=36
36
HV
GN
D
SIG
4
SIG
3
SIG
2
SIG
1
4-SIGNAL OUTPUT CONNECTOR *A
HSA-200-D36P-Xmfg. JC ELECTRONICS CORPORATION
NOTEGND CONNECTOR *A
HSA-200-S02Pmfg. JC ELECTRONICS CORPORATION
-HV CONNECTOR *A
HSA-200-S02Pmfg. JC ELECTRONICS CORPORATION
2
6 ×
6=
366.
256.
25
6 × 6=36 6.256.25
P1
P9
P17
P25
P33
P41
P49
P57
P2
P10
P18
P26
P34
P42
P50
P58
P3
P11
P19
P27
P35
P43
P51
P59
P4
P12
P20
P28
P36
P44
P52
P60
P5
P13
P21
P29
P37
P45
P53
P61
P6
P14
P22
P30
P38
P46
P54
P62
P7
P15
P23
P31
P39
P47
P55
P63
P8
P16
P24
P32
P40
P48
P56
P64
TOP VIEW SIDE VIEW BOTTOM VIEW
M3 DEPTH 2.5
START MARK
2412
223.5
51.0
± 0
.3
INSULATING TAPE
PLASTIC BASE
PC BOARD
22
× 1
7=34
16.4 ± 0.51.5 4
27.4 ± 0.932.7 ± 1.0
0
.5
*A: Suitable sockets for the connectors will be attached.For signal output is HSC-200-D36P-X (JC ELECTRONICS CORPORATION).For -HV, GND is SQT-102-01-L-S (SAMTEC).
NOTE *B: No pin.
GN
DA
NO
DE
GN
DA
NO
DE
GN
DA
NO
DE
GN
DA
NO
DE
58.5
7.50
.49.
42.4
1.34
.33.
26.2
5.18
.17.
10.9
.2.1
60.5
9.52
.51.
44.4
3.36
.35.
28.2
7.20
.19.
12.1
1.4.
3
DY
.64.
63.5
6.55
.48.
47.3
9.32
.31.
24.2
3.16
.15.
8.7
62.6
1.54
.53.
46.4
538
.37
30.2
9.22
.21.
14.1
3.6.
5
PH
OT
OC
AT
HO
DE
(E
FF
EC
TIV
E A
RE
A)
4
8.5
5
1.7
± 0
.3
51
.0+
0.5
-0.1
DY
10 O
UT
PU
T
SIG
NA
L G
ND
AN
OD
E O
UT
PU
T P
1
AN
OD
E O
UT
PU
T P
2
AN
OD
E O
UT
PU
T P
3
AN
OD
E O
UT
PU
T P
4
AN
OD
E O
UT
PU
T P
5
AN
OD
E O
UT
PU
T P
6
AN
OD
E O
UT
PU
T P
7
AN
OD
E O
UT
PU
T P
8
AN
OD
E O
UT
PU
T P
57
AN
OD
E O
UT
PU
T P
58
AN
OD
E O
UT
PU
T P
59
AN
OD
E O
UT
PU
T P
60
AN
OD
E O
UT
PU
T P
61
AN
OD
E O
UT
PU
T P
62
AN
OD
E O
UT
PU
T P
63
AN
OD
E O
UT
PU
T P
64
. .....
4-(DOUBLE-ROW 2 mm Pitch) CONNECTOR
P1
P2
P3
P4
P5
P6
P7
P8
P57
P58
P59
P60
P61
P62
P63
P64
ACTIVE VOLTAGEDIVIDER
K
R8R7R6R5R4R3R2R1
DY10DY9DY8DY7DY6DY5DY4DY3DY2DY1
GR
R21
R23
R22
R20R19R18R17R16
C4C3C2C1
C10
C12
C11
R1: 430 kΩR2: 360 kΩR3: 51 kΩR4 to R8: 330 kΩR16, R20: 10 kΩR17, R19: 51 ΩR21: 1 MΩ
DIVIDER CURRENT 214 µA at -1100 V (MAX.)
R22, R23: 4.99 kΩ
1, C2: 0.01 µFC3: 0.022 µFC4: 0.033 µFC10: 0.01 µFC11, C12: 0.0015 µF
SHV-P(SHIELD CABLE, GLAY)
H12700B H12700B-10
H12700A H12700A-10
DY
10 O
UT
PU
T
SIG
NA
L G
ND
AN
OD
E O
UT
PU
T P
1
AN
OD
E O
UT
PU
T P
2
AN
OD
E O
UT
PU
T P
3
AN
OD
E O
UT
PU
T P
4
AN
OD
E O
UT
PU
T P
5
AN
OD
E O
UT
PU
T P
6
AN
OD
E O
UT
PU
T P
7
AN
OD
E O
UT
PU
T P
8
AN
OD
E O
UT
PU
T P
57
AN
OD
E O
UT
PU
T P
58
AN
OD
E O
UT
PU
T P
59
AN
OD
E O
UT
PU
T P
60
AN
OD
E O
UT
PU
T P
61
AN
OD
E O
UT
PU
T P
62
AN
OD
E O
UT
PU
T P
63
AN
OD
E O
UT
PU
T P
64
. .....
4-(DOUBLE-ROW 2 mm Pitch) CONNECTOR
P1
P2
P3
P4
P5
P6
P7
P8
P57
P58
P59
P60
P61
P62
P63
P64
ACTIVE VOLTAGEDIVIDER
K
R8R7R6R5R4R3R2R1
DY10DY9DY8DY7DY6DY5DY4DY3DY2DY1
GR
R21
R23
R22
R20R19R18R17R16
C4C3C2C1
C10
C12
C11
SHV-P(SHIELD CABLE, GRAY)
R1 to R8: 390 kΩR16, R20: 10 kΩR17 to R19: 51 ΩR21: 1 MΩR22, R23: 4.99 kΩ
DIVIDER CURRENT 225 µA at -1100 V
C1, C2: 0.01 µFC3: 0.022 µFC4: 0.033 µFC10: 0.01 µFC11, C12: 0.0015 µF
45
(Unit: mm)
*2 H13700
*3 H13974-00-1616
TPMHA0618EB
SHV-P(SHIELD CABLE, GRAY)
K
R1
DY1 DY2
R2
DY3
R3
DY4
R4
DY5
R5
DY6
R6 R7
R15
C2
TRANSISTOR CIRCUIT
DY
10 O
UT
PU
T
SIG
NA
L G
ND
DY8
R16
DY9
R17 R18
DY10 GR P1
R19
R20
R21
R14
C1
DY7
C3 C4
C10
C12
C11
AN
OD
E O
UT
PU
T (
P1)
P2
AN
OD
E O
UT
PU
T (
P2)
P15
AN
OD
E O
UT
PU
T (
P15
)
P16
AN
OD
E O
UT
PU
T (
P16
)(P
17 t
o P
32)
(P22
5 to
P24
0)
P241
AN
OD
E O
UT
PU
T (
P24
1)
P242
AN
OD
E O
UT
PU
T (
P24
2)
P255
AN
OD
E O
UT
PU
T (
P25
5)
P256
AN
OD
E O
UT
PU
T (
P25
6)
. ..... ...... ......
....
2-(DOUBLE-ROW 0.5 PITCH) CONNECTOR
....
..
....
..
CONNECTION FOR SIGNAL CONNECTORS(BOTTOM VIEW)
12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970
GNDGNDGNDP177P161P145P129P178P162P146P130P179P163P147P131P180P164P148P132P181P165P149P133P182P166P150P134P183P167P151P135P184P168P152P136P137P153P169P185P138P154P170P186P139P155P171P187P140P156P172P188P141P157P173P189P142P158P174P190P143P159P175P191P144P160P176P192GNDGNDGND
GNDGNDGNDP193P209P225P241P194P210P226P242P195P211P227P243P196P212P228P244P197P213P229P245P198P214P230P246P199P215P231P247P200P216P232P248P249P233P217P201P250P234P218P202P251P235P219P203P252P236P220P204P253P237P221P205P254P238P222P206P255P239P223P207P256P240P224P208GNDGNDGND
7172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140
PIN
AS
SIG
NM
EN
T F
OR
CO
NN
EC
TO
R (
9984
B-1
40Y
901)
PIN
AS
SIG
NM
EN
T F
OR
PM
T A
NO
DE
PIN
AS
SIG
NM
EN
T F
OR
PM
T A
NO
DE
12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970
GNDGNDGNDP49P33P17P1P50P34P18P2P51P35P19P3P52P36P20P4P53P37P21P5P54P38P22P6P55P39P23P7P56P40P24P8P9P25P41P57P10P26P42P58P11P27P43P59P12P28P44P60P13P29P45P61P14P30P46P62P15P31P47P63P16P32P48P64GNDGNDDY10
GNDGNDGNDP65P81P97P113P66P82P98P114P67P83P99P115P68P84P100P116P69P85P101P117P70P86P102P118P71P87P103P119P72P88P104P120P121P105P89P73P122P106P90P74P123P107P91P75P124P108P92P76P125P109P93P77P126P110P94P78P127P111P95P79P128P112P96P80GNDGNDGND
7172737475767778798081828384858687888990919293949596979899
100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140
PIN
AS
SIG
NM
EN
T F
OR
CO
NN
EC
TO
R (
9984
B-1
40Y
901)
PIN
AS
SIG
NM
EN
T F
OR
PM
T A
NO
DE
PIN
AS
SIG
NM
EN
T F
OR
PM
T A
NO
DE
SIG1 SIG2
INSULATING TAPE9984B-140Y901IRISO ELECTRONICS CO., LTD
SIG1
SIG2P
HO
TO
CA
TH
OD
E (
EF
FE
CT
IVE
AR
EA
)
48.
5
106
5
1.8
± 0
.3
32.1 47.5
48.2
3.0 × 14=42.0
3.0
( 48.5)
3
4
2
3
1173349658197113129145161177193209225241
2183450668298114130146162178194210226242
3193551678399115131147163179195211227243
42036526884100116132148164180196212228244
52137536985101117133149165181197213229245
62238547086102118134150166182198214230246
72339557187103119135151167183199215231247
82440567288104120136152168184200216232248
92541577389105121137153169185201217233249
102642587490106122138154170186202218234250
112743597591107123139155171187203219235251
122844607692108124140156172188204220236252
132945617793109125141157173189205221237253
143046627894110126142158174190206222238254
153147637995111127143159175191207223239255
163248648096112128144160176192208224240256
TOP VIEW SIDE VIEW BOTTOM VIEW
CASE (POM)
4 × M2 DEPTH: 8
-HV: SHV-P(SHIELD CABLE, GRAY)
START MARK
3.0
× 1
4=42
.0
3.0
450
5
1
18.3
29.9
31
+20
-0
R1.8
51.8 ± 0.3
SE
PA
RA
TIO
N M
AR
KO
N F
OC
US
ING
ELE
CT
RO
DE
R1, R19: 1 MΩR2-R7: 470 kΩR14, R18: 10 kΩR15 to R17: 51 ΩR20, R21: 4.99 kΩ
C1, C2: 0.01 µFC3: 0.022 µFC4: 0.033 µFC10: 0.01 µFC11, C12: 0.0015 µF
DIVIDER CURRENT 185 µA at -1100 V (MAX.)
TPMHA0455ED
TPMHC0269EA
TPMHA0625EA
*4 H7260, H7260-100, H7260-200
PMT-1
VOLTAGEDIVIDER CIRCUIT
(ACTIVE BASE)
-HV
: SH
V-P
SH
IELD
CA
BLE
(GR
AY)
SIG
NA
L G
ND
Dy1
0 O
UTP
UT
ANO
DE O
UTPU
TP
1 to
P64
PMT-2
VOLTAGEDIVIDER CIRCUIT
(ACTIVE BASE)
SIG
NA
L G
ND
Dy1
0 O
UTP
UT
ANO
DE O
UTPU
TP
1 to
P64
PMT-3
VOLTAGEDIVIDER CIRCUIT
(ACTIVE BASE)
SIG
NA
L G
ND
Dy1
0 O
UTP
UT
ANO
DE O
UTPU
TP
1 to
P64
PMT-4
VOLTAGEDIVIDER CIRCUIT
(ACTIVE BASE)
SIG
NA
L G
ND
Dy1
0 O
UTP
UT
ANO
DE O
UTPU
TP
1 to
P64
16- (DOUBLE-ROW 2 mm PITCH) CONNECTOR-P
GND
ANODESIG
4
7.8. 15.16. 23.24. 31.32. 39.40. 47.48. 55.56. 63.64. Dy
GND
ANODESIG
3
5.6. 13.14. 21.22. 29.30. 37.38. 45.46. 53.54. 61.62
GND
ANODESIG
2
3.4. 11.12. 19.20. 27.28. 35.36. 43.44. 51.52. 59.60
GND
ANODESIG
1
1.2. 9.10. 17.18. 25.26. 33. 34. 41.42. 49.50. 57.58
GND
ANODESIG
4
GND
ANODESIG
3
GND
ANODESIG
2
GND
ANODESIG
1
GND
ANODESIG
4
GND
ANODESIG
3
GND
ANODESIG
2
GND
ANODESIG
1
GND
ANODESIG
4
GND
ANODESIG
3
GND
ANODESIG
2
GND
ANODESIG
1
-HV
HA
MA
MATS
UF
LAT PA
NE
L PM
T A
RR
AY
48.5 48.5(3) 2 15.5
36 (12 PITCH)
4
48.5
48.5
(3) (0
.5) 51
.0 ±
0.3
51.0
± 0
.3 105.
7 ±
0.3
(0.5)
51.0 ± 0.351.0 ± 0.3
105.7 ± 0.3
1532.5 ± 0.5
1 2
3 4
3615
.5
16 × SIGNAL OUTPUT CONNECTORHSA-200-D36P-Xmfg. JC ELECTRONICS CORPORATION
450+20 -0
ALUMINUM CASE(No electric potential)
Silicone (BLACK): Between PMT and case
Silicone (CLEAR): Between PMT and PMT
-HV: SHV-P (SHIELD CABLE, GRAY)
* 2 × 2 array of 51 mm (efective area 48.5) PMT
TOP VIEW SIDE VIEW BOTTOM VIEW
52.0 ± 0.5
24.0
± 0
.5
70.
8 T
YP
.35
.0 ±
0.5
3.3
31.8
2.54 × 15 = 38.11.27 2.54
2.54
5.08
7.62
-HV INPUT TERMINAL ( 0.5)
GND TERMINALPIN ( 0.5)ANODE #1
ANODE #2
HOUSING (POM)
ANODE #32
ANODE #31
ANODEWINDOW #1
0.8
1
ANODEWINDOW #32
DY10 OUTPUTPIN ( 0.5)
ANODE #1 to #32 OUTPUT ( 0.46)(16 PIN × 2 LINE 2.54 PITCH)
A32-ANODE - A2 -HV
DY OUT A31-ANODE - A1 GND7.5
GN
D T
ER
MIN
AL
PIN
SHIELD
SHIELD
-HV
INP
UT
TE
RM
INA
L P
INP1 P2 P31 P32
AN
OD
E1
OU
TPU
T
AN
OD
E2
OU
TPU
T
8 × 2 LINE2.54 PITCH
AN
OD
E31
OU
TPU
T
AN
OD
E32
OU
TPU
T
DY
10 O
UT
PU
T
R10
GK
R1 to R7R8, R9
R10R11
C1 to C4
: 220 kΩ: 51 Ω: 1 MΩ: 10 kΩ: 0.01 μF
VO
LTA
GE
DIV
IDE
R C
UR
RE
NT
= 0
.37
mA
at -
900
V (
MA
X. R
AT
ING
) IN
PU
T
R7
R6
R5
R4
R3
R2
R1
C1
C2
C3C4
DY1
DY2
DY3
DY4
DY5
DY6
DY7
DY8
DY9
DY10R9
R11
R8
ACTI
VE B
ASE
CIRC
UIT
BOTTOM VIEW
SIDE VIEW
TOP VIEW
46
*8 H12690, H12690-300
TPMHA0596EATPMHA0311EE
TPMHA0310EE
*6 H3695-10
*7 H3165-10
TPMHA0309EE
*5 H3164-10
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
*TO MAGNETIC SHIELD CASE
PC3
C2
C1
K -HV: SHIELD CABLE (GRAY)
SIGNAL OUTPUT: RG-174/U (BLACK)
R1 to R11C1 to C3
: 330 kΩ: 0.01 μF
* MAGNETIC SHIELD IS CONNECTED TO -HV INSIDE OF THIS PRODUCT.
** HIGH VOLTAGE SHIELDED CABLE CAN BE CONNECTED TO A CONNECTOR FOR RG-174/U.
95.0
± 2
.515
00
-HV: SHIELD CABLE (GRAY)
10.6 ± 0.2
PHOTOCATHODE
PMT: R1635WITH HA TREATMENT
MAGNETICSHIELD (t=0.2 mm)WITH HEATSHRINKABLE TUBE
10.5 ± 0.6
8 MIN.
SIGNAL OUTPUT: RG-174/U (BLACK)
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
PC3
C2
C1
K
R1 to R4R5 to R10C1 to C3
: 510 kΩ: 330 kΩ: 0.01 μF
-HV: SHIELD CABLE (GRAY)
*TO MAGNETIC SHIELD CASE
SIGNAL OUTPUT: RG-174/U (BLACK)
11.3 ± 0.7
8 MIN.
PHOTOCATHODE
PMT: R2496WITH HA TREATMENT
MAGNETICSHIELD (t=0.2 mm)WITH HEATSHRINKABLE TUBE
SIGNAL OUTPUT: RG-174/U (BLACK)
-HV: SHIELD CABLE (GRAY)
10.6 ± 0.2
95.0
± 2
.515
00
* MAGNETIC SHIELD IS CONNECTED TO -HV INSIDE OF THIS PRODUCT.
** HIGH VOLTAGE SHIELDED CABLE CAN BE CONNECTED TO A CONNECTOR FOR RG-174/U.
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
DY10
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
PC3
C2
C1
K
R1 to R11C1 to C3
: 330 kΩ: 0.01 μF
-HV: SHIELD CABLE (RED)
SIGNAL OUTPUT: RG-174/U (BLACK)
* MAGNETIC SHIELD IS CONNECTED TO -HV INSIDE OF THIS PRODUCT.
** HIGH VOLTAGE SHIELDED CABLE CAN BE CONNECTED TO A CONNECTOR FOR RG-174/U.
* TO MAGNETIC SHIELD CASE
14.3 ± 0.6
10 MIN.
PHOTOCATHODE
PMT: R647-01WITH HA TREATMENT
MAGNETIC SHIELD CASE (t=0.2 mm)WITH HEATSHRINKABLE TUBE
12.4 ± 0.5
SIGNAL OUTPUT: RG-174/U (BLACK)
-HV: SHIELD CABLE (RED)
116.
0 ±
3.0
1500
C3
C2
C1
R12DY10
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
R1 to R12C1 to C3
: 330 kΩ: 0.01 μF
SIGNAL OUTPUTRG-174/U (BLACK)
-HVSHIELD CABLE (RED)
* TO MAGNETIC SHIELD CASE
* MAGNETIC SHIELD IS CONNECTED TO -HV INSIDE OF THIS PRODUCT.
** HIGH VOLTAGE SHIELDED CABLE CAN BE CONNECTED TO A CONNECTOR FOR RG-174/U.
(H12690-300: PMT: R12421-300)
14.3 ± 0.7
10 MIN.
88 ±
315
0010
5
12.4 ± 0.5
PHOTOCATHODE
PMT: R12421WITH HA TREATMENT
SIGNAL OUTPUTRG-174/U (BLACK)
-HV: SHIELD CABLE (RED)
MAGNETIC SHIELD CASE (t=0.2)WITH HEAT SHRINKABLE TUBE
P
K
47
(Unit: mm)
TPMHA0313EC
(0 H6524
TPMHA0314EC
(2 H6613(1 H6612
TPMHA0315EC
TPMHA0312ED
*9 H6520
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
DY10
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
P
C3
C2
C1
K
R1R2 to R11C1 to C3
: 510 kΩ: 330 kΩ: 0.01 μF
* TO MAGNETIC SHIELD CASE
-HV: SHIELD CABLE (GRAY)
SIGNAL OUTPUT: RG-174/U (BLACK)
-HV: SHIELD CABLE (GRAY)
PHOTOCATHODE
PMT: R1166WITH HA TREATMENT
MAGNETIC SHIELD CASE (t=0.5 mm)
23.5 ± 0.5
19.3 ± 0.7
15 MIN.
130.
0 ±
0.8
1500
1 M
AX
.
SIGNAL OUTPUT: RG-174/U (BLACK)
* MAGNETIC SHIELD IS CONNECTED TO GND INSIDE OF THIS PRODUCT.
** HIGH VOLTAGE SHIELDED CABLE CAN BE CONNECTED TO A CONNECTOR FOR RG-174/U.
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
DY10
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
P
C3
C2
C1
K
23.5 ± 0.5
19.3 ± 0.7
15 MIN.
PHOTOCATHODE
PMT: R1450WITH HA TREATMENT
MAGNETIC SHIELD CASE (t=0.5 mm)
SIGNAL OUTPUT: RG-174/U (BLACK)
-HV: SHIELD CABLE (GRAY)
130.
0 ±
0.8
1500
1 M
AX
.
-HV: SHIELD CABLE (GRAY)
SIGNAL OUTPUT: RG-174/U (BLACK)
* TO MAGNETIC SHIELD CASE
* MAGNETIC SHIELD IS CONNECTED TO GND INSIDE OF THIS PRODUCT.
** HIGH VOLTAGE SHIELDED CABLE CAN BE CONNECTED TO A CONNECTOR FOR RG-174/U.
R1R3
R2, R4 to R11C1 to C3
: 680 kΩ: 510 kΩ: 330 kΩ: 0.01 μF
-HV: SHIELD CABLE (RED)
SIGNAL OUTPUT: RG-174/U (BLACK)
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
-HV: SHIELD CABLE (RED)
P
C3
C2
C1
K
SIGNAL OUTPUT: RG-174/U (BLACK)
R1R2R3
R4, R6 to R11R5
C1 to C3
: 1 MΩ: 750 kΩ: 560 kΩ: 330 kΩ: 510 kΩ: 0.01 μF
* TO MAGNETICSHIELD CASE
* MAGNETIC SHIELD IS CONNECTEDTO GND INSIDE OF THIS PRODUCT.
THE H6613-01 IS A VARIANT OF H6613WITH A TERMINAL RESISTOR (50Ω).
PHOTOCATHODE
PMT: R2076WITH HA TREATMENT
MAGNETIC SHIELD CASE (t=0.5 mm)
23.5 ± 0.5
18.7 ± 1.0
15 MIN.
130.
0 ±
0.8
1500
MIN
.
1 M
AX
.
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
P
C3
C2
C1
K
23.5 ± 0.5
19.3 ± 0.7
15 MIN.
PHOTOCATHODE
PMT: R3478WITH HA TREATMENT
MAGNETIC SHIELD CASE (t=0.5 mm)
SIGNAL OUTPUT: RG-174/U (BLACK)
-HV: SHIELD CABLE (GRAY)
130.
0 ±
0.8
1500
1 M
AX
. SIGNAL OUTPUT: RG-174/U (BLACK)
* TO MAGNETIC SHIELD CASE
-HV: SHIELD CABLE (GRAY)
* MAGNETIC SHIELD IS CONNECTED TO GND INSIDE OF THIS PRODUCT.
** HIGH VOLTAGE SHIELDED CABLE CAN BE CONNECTED TO A CONNECTOR FOR RG-174/U.
R1R2R3
R4, R6 to R11R5
C1 to C3
: 1 MΩ: 750 kΩ: 560 kΩ: 330 kΩ: 510 kΩ: 0.01 μF
48
31.0 ± 0.5
26 ± 1
22 MIN.
120.
0 ±
0.8
1 M
AX
.
-HV: SHIELD CABLE (RED)
P
K
ANODE OUTPUT: RG-174/U (BLACK)
R17
R18
1500
MIN
.
R1, R2, R4, R11, R12R3, R5 to R10
R13, R14R15, R16
R17 to R19C1, C2
C3C4
: 300 kΩ: 200 kΩ: 360 kΩ: 330 kΩ: 51 Ω: 0.01 μF: 0.022 μF: 0.033 μF
C1
C2
C3
C4
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
DY9
R19DY10
ANODE OUTPUT: RG-174/U (BLACK)
-HV: SHIELD CABLE (RED)
PMT: R7899-01 WITH HA TREATMENT
MAGNETIC SHIELD CASE (t=0.8 mm)
PHOTOCATHODE
R1
R2
R3
R4
R5
R6
R7
R8
R9
R10
R11
R12
R13
R14
R15
R16
* TO MAGNETICSHIELD CASE
* MAGNETIC SHIELD IS CONNECTEDTO GND INSIDE OF THIS PRODUCT.
(4 H6533
(5 H6152-70
TPMHA0317ED
TPMHA0470EC
100.
0 ±
0.8
1500
10
5
1 M
AX
.
R17
R16
R15
R14
R13
R12
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
DY15
DY14
DY13
DY12
DY11
DY10
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
P C5
C4
C3
C2
C1
C7
K
R21
R20
R19
R18
C6R22 R24
R23
SIGNAL OUTPUT: RG-174/U (BLACK)
: 330 kΩ: 1 MΩ: 51 Ω: 100 kΩ: 10 kΩ: 0.01 μF: 0.0047 μF
R1 to R17R18, R23
R19 to R21R22R24
C1 to C5C6, C7
+HV: SHIELD CABLE (GRAY)
31.0 ± 0.5
25.8 ± 0.7
17.5 MIN.
PMT: R5505-70WITH HA TREATMENT
PHOTOCATHODE
POM CASE
SIGNAL OUTPUT: RG-174/U (BLACK)
+HV: SHIELD CABLE (GRAY)
* HIGH VOLTAGE SHIELDED CABLE CAN BE CONNECTED TO A CONNECTOR FOR RG-174/U.
(6 H8643
TPMHA0514EB
(3 H8135
TPMHA0513EC
24.0 ± 0.5
19.3 ± 1.0
15 MIN.
60.0
± 0
.8
1 M
AX
.
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
DY10
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1-HV: SHIELD CABLE (RED)
P
C3
C2
C1
K
SIGNAL OUTPUT: RG-174/U (BLACK)
1500
MIN
.
R1R2 to R11C1 to C3
: 1 MΩ: 330 kΩ: 0.01 μF
-HV: RG-174/U (RED)
SIGNAL OUTPUT: RG-174/U (BLACK)
PHOTOCATHODE
PMT: R5611A WITH HA TREATMENT
MAGNETIC SHIELD CASE (t=0.5 mm)
* TO MAGNETICSHIELD CASE
* MAGNETIC SHIELD IS CONNECTEDTO GND INSIDE OF THIS PRODUCT.
R19
R18
R17
R16
R15
R14
R13
R12
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
DY10
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
P
C4
C3
C2
C1
K
R22
R21
R20
G
ACC
* TO MAGNETIC SHIELD CASE
-HV: SHIELD CABLE (GRAY)
* MAGNETIC SHIELD IS CONNECTED TO GND INSIDE OF THIS PRODUCT.
** HIGH VOLTAGE SHIELDED CABLE CAN BE CONNECTED TO A CONNECTOR FOR RG-174/U.
31.0 ± 0.5
26 ± 1
20 MIN.
120.
0 ±
0.8
1500
MIN
.
1 M
AX
.
-HV: SHIELD CABLE (GRAY)
SIGNAL OUTPUT: RG-174/U (BLACK)
PMT: R4998 (H6533)R5320 (H6610)
WITH HA TREATMENT
MAGNETIC SHIELD CASE (t=0.8 mm)
PHOTOCATHODE
SIGNAL OUTPUT: RG-174/U (BLACK)
R1, R3, R19R2, R7 to R12,
R15 to R17R4
R5, R18R6, R14
R13R20 to R22
C1 to C3C4
: 430 kΩ
: 330 kΩ: 820 kΩ: 390 kΩ: 270 kΩ: 220 kΩ: 51 Ω: 0.022 μF: 0.033 μF
(Unit: mm)
49
TPMHA0318ED
(8 H7415
(9 H3178-51 H8409-70
TPMHA0320EC TPMHA0476EC
-HV
SIG
R13
R12
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
DY10
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
P
C4
C3
C2
C1
K
R14
R15
C5
47.0 ± 0.5
39 ± 1
34 MIN.
PHOTOCATHODE
PMT: R580WITH HA TREATMENT
MAGNETIC SHIELD CASE (t=0.8 mm)
162.
0 ±
0.8
1 M
AX
.
-HV: SHV-R
SIGNAL OUTPUT: BNC-R
* TO MAGNETIC SHIELD CASE
-HV: SHV-R
SIGNAL OUTPUT: BNC-R
R1, R10, R12R2 to R6, R13
R7R8R9
R11R14R15C1C2C3C4C5
: 300 kΩ: 150 kΩ: 180 kΩ: 220 kΩ: 330 kΩ: 240 kΩ: 51 Ω: 10 kΩ: 0.01 μF: 0.022 μF: 0.047 μF: 0.1 μF: 4700 pF
* MAGNETIC SHIELD IS CONNECTEDTO GND INSIDE OF THIS PRODUCT.
TPMHA0554EA
(7 H10580
R13
R12
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
DY10
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
P
C3
C2
C1
K
R16
R15
R14
R1,R2R3R5
R4,R6 to R13R14 to R16
C1 to C3
: 430 kΩ: 470 kΩ: 510 kΩ: 300 kΩ: 51 Ω: 0.01 μF
* TO MAGNETIC SHIELD CASE
SIGNAL OUTPUT: RG-174/U (BLACK)
-HV: SHIELD CABLE (GRAY)
1500
MAGNETIC SHIELD CASE (t=0.8 mm)
130.
0 ±
0.8
1 M
AX
.
PMT: R6427 (H7415)R7056 (H7416)
WITH HA TREATMENT
PHOTOCATHODE
33.0 ± 0.5
29.0 ± 0.7
25 MIN.
-HV: SHIELD CABLE (GRAY)
SIGNAL OUTPUT: RG-174/U (BLACK)
* MAGNETIC SHIELD IS CONNECTED TO GND INSIDE OF THIS PRODUCT.
** HIGH VOLTAGE SHIELDED CABLE CAN BE CONNECTED TO A CONNECTOR FOR RG-174/U.
R21
R20
R19
R18
R17
R16
R15
R14
R13
R12
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
DY19
DY18
DY17
DY16
DY15
DY14
DY13
DY12
DY11
DY10
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
C5
C4
C3
C2
C1
K
R25
R24
R23
R22
R1 to R21R22, R28
R23 to R25R26R27
C1 to C5C6, C7
: 330 kΩ: 1 MΩ: 51 Ω: 10 kΩ: 100 kΩ: 0.01 μF: 0.0047 μF
P
C6C7R27 R26
R28
27 MIN.
45.0 ± 0.5
39 ± 1
80.0
± 0
.815
00
510
1 M
AX
.
PHOTOCATHODE
PMT: R7761-70WITH HA TREATMENT
POM CASE
+HV: SHIELD CABLE (GRAY)
SIGNAL OUTPUT: RG-174/U (BLACK)
* HIGH VOLTAGE SHIELDED CABLE CAN BE CONNECTED TO A CONNECTOR FOR RG-174/U.
SIGNAL OUTPUT: RG-174/U (BLACK)
+HV: SHIELD CABLE (GRAY)
100
-HV: SHIELD CABLE (RED)
* TO MAGNETICSHIELD CASE
SIGNAL OUTPUT: RG-174/U (BLACK) WITH BNC
-HV: SHIELD CABLE (RED) WITH SHV
PHOTOCATHODE
MAGNETIC SHIELD CASE (±0.8 mm)
PMT: R9800WITH HA TREATMENT
31.5 ± 0.5
25.4 ± 0.5
22 MIN.
120.
0 ±
0.8
1 M
AX
.15
00 M
IN.
AC
TIV
E V
OLT
AG
E D
IVID
ER
C3
C2
R9
R8
R7
R6
R5
R4
R3
R2
R1
C1
DY8
P
DY7
DY5
DY4
DY3
DY2
DY1
K
DY6
SIGNAL OUTPUT: RG-174/U (BLACK)
R1R2
R3, R4R5, R6
R7 to R9C1 to C3
: 1 MΩ: 200 kΩ: 470 kΩ: 300 kΩ: 51 Ω: 0.01 μF
* MAGNETIC SHIELD IS CONNECTEDTO GND INSIDE OF THIS PRODUCT.
50
H7195
TPMHA0323ED
-HV
A1
A2
DY
R1, R25R2 to R4, R17 to R19
R5, R6, R8 to R13, R15R16, R20, R21
R7, R14R22
R23, R24C1C2C3C4C5C6C7
: 10 kΩ: 110 kΩ
: 100 kΩ: 160 kΩ: 51 Ω: 100 Ω: 470 pF: 0.022 μF: 0.047 μF: 0.1 μF: 0.22 μF: 0.47 μF: 0.01 μF
R21R20R19R18R17R16R15R14R13R12R11R10R9R8R7R6R5R4R3R2
DY12
DY11
DY10DY9DY8DY7DY6DY5DY4DY3DY2DY1
-HV: SHV-R
PC6
C5
C4
C3C2
K
R25
R24
R23
R22
R1
C1
G
C7
ANODE OUTPUT 2: BNC-R
DYNODE OUTPUT: BNC-R
ANODE OUTPUT 1: BNC-R
* TO MAGNETICSHIELD CASE
* MAGNETIC SHIELD IS CONNECTED TO GND INSIDE OF THIS PRODUCT.
60.0 ± 0.5
53.0 ± 1.5
46 MIN.
PMT: R329WITH HA TREATMENT
MAGNETIC SHIELD CASE (t=0.8 mm)
PHOTOCATHODE
- HV: SHV-R
ANODE OUTPUT 2: BNC-R
DYNODE 12 OUTPUT: BNC-R
ANODE OUTPUT 1: BNC-R
215
± 1
1 M
AX
.
102
H1949-50
TPMHA0325ED
103 H1949-51
TPMHA0326ED
-HV
A1
R17
R16
R15
R14
R13
R12
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
DY12
DY11
DY10
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
PC6
C5
C4
C3
C2
C1
R1, R4R2, R5
R3, R6 to R11, R17R12 to R16R18 to R20
R21C1 to C7
C8C9
C10C11
: 240 kΩ: 360 kΩ: 200 kΩ: 300 kΩ: 51 Ω: 10 kΩ: 0.01 μF: 0.022 μF: 0.033 μF: 0.01 μF: 470 pF
R20
R19
R18
G1
Acc C11
R21
C9
C8
C7
C10
K
* MAGNETIC SHIELD IS CONNECTEDTO GND INSIDE OF THIS PRODUCT.
60.0 ± 0.5
53.0 ± 1.5
46 MIN.
PMT: R1828-01 (H1949-51)R2059 (H3177-51)R4004 (H4022-51)
WITH HA TREATMENT
PHOTOCATHODE
MAGNETIC SHIELD CASE (t=0.8 mm)
-HV: SHV-R
SIGNAL OUTPUT: BNC-R
235
± 1
1 M
AX
.
SIGNAL OUTPUT: BNC-R
-HV: SHV-R
* TO MAGNETIC SHIELD CASE
104
H6410
TPMHA0324ED
-HV
SIG
R1, R5R2, R10, R16
R3, R9R4, R6 to R8, R14, R18
R11, R13, R17R12, R15
R19R20, R21
R22C1C2C3C4C5C6
: 240 kΩ: 220 kΩ: 180 kΩ: 150 kΩ: 300 kΩ: 360 kΩ: 51 Ω: 100 Ω: 10 kΩ: 0.022 μF: 0.047 μF: 0.1 μF: 0.22 μF: 0.47 μF: 470 pF
R18R17R16R15R14R13R12R11R10R9R8
R7
R6R5R4R3R2R1
DY12
DY11
DY10DY9DY8DY7DY6DY5
DY4DY3DY2DY1
PC5
C4
C3
C2C1
R21
R20
R19
R22
C6G
SH
K
* MAGNETIC SHIELD IS CONNECTEDTO GND INSIDE OF THIS PRODUCT.
-HV: SHV-R
SIGNAL OUTPUT: BNC-R
MAGNETIC SHIELD CASE (t=0.8 mm)
PMT: R329 (H6410)R5113 (H6522)R2256 (H6521)
WITH HA TREATMENT
PHOTOCATHODE
60.0 ± 0.5
53.0 ± 1.5
46 MIN.
200
± 1
1 M
AX
.
-HV: SHV-R
SIGNAL OUTPUT: BNC-R
* TO MAGNETIC SHIELD CASE
101
60.0 ± 0.5
53.0 ± 1.5
46 MIN.
235
± 1
1 M
AX
.
-HV
A1
A2
DY
-HV: SHV-RANODE
OUTPUT 2: BNC-R
R1, R21R2, R5
R3, R7 to R12, R16R4, R6
R13, R14, R17R15
R18 to R20C1
C2 to C4, C10 to C12C5, C6
C7C8, C9
R17
DY12
-HV: SHV-R
PC7
K
ANODE OUTPUT 2: BNC-R
R21
R1
Acc
C11
ANODE OUTPUT 1: BNC-R
DYNODE OUTPUT: BNC-R
C10
G
C12
C1
DYNODE OUTPUT: BNC-R
ANODE OUTPUT 1: BNC-R
* TO MAGNETICSHIELD CASE
* MAGNETIC SHIELD IS CONNECTED TO GND INSIDE OF THIS PRODUCT.
DY11DY10DY9DY8DY7DY6DY5DY4DY3DY2
DY1
R16R15R14R13R12R11R10R9R8R7R6R5
R4R3R2
R20R19R18
C6C5C4C3C2
C9C8
: 10 kΩ: 120 kΩ: 100 kΩ: 180 kΩ: 150 kΩ: 300 kΩ: 51 Ω: 470 pF: 0.01 μF: 0.022 μF: 0.033 μF: 4700 pF
PHOTOCATHODE
PMT: R1828-01 (H1949-50)
MAGNETIC SHIELD CASE (t=0.8 mm)
WITH HA TREATMENT
R2059 (H3177-50)R4004 (H4022-50)
(Unit: mm)
51
H6614-70
H6559 H6527
TPMHA0472EC
TPMHA0331EC TPMHA0332EF
R21
R20
R19
R18
R17
R16
R15
R14
R13
R12
R11
R10
R9
R8
R8
R6
R5
R4
R3
R2
R1
DY19
DY18
DY17
DY16
DY15
DY14
DY13
DY12
DY11
DY10
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
C5
C4
C3
C2
C1
K
R1 to R21R22, R29
R23 to R26R27R28
C1 to C5C6, C7
: 330 kΩ: 1 MΩ: 51 Ω: 10 kΩ: 100 kΩ: 0.01 μF: 0.0047 μF
R26
R25
R24
R23
R22
P
C6C7R28 R27
R29
* HIGH VOLTAGE SHIELDED CABLE CAN BE CONNECTED TO A CONNECTOR FOR RG-174/U.
+HV: SHIELD CABLE (GRAY)
SIGNAL OUTPUT: RG-174/U (BLACK)
LIGHT SHIELD STEM
POM CASE
PMT: R5924-70WITH HA TREATMENT
PHOTOCATHODE
60.0 ± 0.5
52 ± 1
39 MIN.
1500
105
801
MA
X.
+0 -1
SIGNAL OUTPUT: RG-174/U (BLACK)
+HV: SHIELD CABLE (GRAY)
-HV
SIG
R1, R5R2, R10, R16
R3, R9R4, R6 to R8, R14, R18
R11, R13, R17R12, R15
R19R20, R21
R22C1C2C3C4C5C6
: 240 kΩ: 220 kΩ: 180 kΩ: 150 kΩ: 300 kΩ: 360 kΩ: 51 Ω: 100 Ω: 10 kΩ: 0.022 μF: 0.047 μF: 0.1 μF: 0.22 μF: 0.47 μF: 470 pF
R18R17R16R15R14R13R12R11R10R9R8
R7
R6R5R4R3R2R1
DY12
DY11
DY10DY9DY8DY7DY6DY5
DY4DY3DY2DY1
-HV: SHV-R
PC5
C4
C3
C2C1
R21
R20
R19
R22
C6G
SH
K
SIGNAL OUTPUT: BNC-R
* TO MAGNETIC SHIELD CASE
-HV: SHV-R
SIGNAL OUTPUT: BNC-R
70 ± 1
1 M
AX
.
40 ±
1
218
± 1
83 ± 1
77.0 ± 1.5
65 MIN.
PHOTOCATHODE
PMT: R6091WITH HA TREATMENT
MAGNETIC SHIELD CASE (t=0.8 mm)
* MAGNETIC SHIELD IS CONNECTED TO GND INSIDE OF THIS PRODUCT.
-HV
SIG
R17
R16
R15
R14
R13
R12
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
DY14
DY13
DY12
DY11
DY10
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
P
C5
C4
C3
C2
C1
R1, R17R2R3R4R5
R6 to R13R14, R15
R16R18
R19, R20R21
C1C2C3C4C5C6
: 240 kΩ: 360 kΩ: 390 kΩ: 120 kΩ: 180 kΩ: 100 kΩ: 150 kΩ: 300 kΩ: 51 Ω: 100 Ω: 10 kΩ: 0.022 μF: 0.047 μF: 0.1 μF: 0.22 μF: 0.47 μF: 470 pF
R20
R19
R18
R21 -HV: SHV-R
C6G1
G2
K
H6527=Flat window, Borosilicate
* MAGNETIC SHIELD IS CONNECTED TO GND INSIDE OF THIS PRODUCT.
* TO MAGNETIC SHIELD CASE
74 ± 0.5
MAGNETIC SHIELD CASE (t=0.8 mm)
PMT: R1250WITH HA TREATMENT
SOCKET ASSYHOUSING
BLACK TAPE
PHOTOCATHODE
77
120 MIN.
133 ± 2
142.0 ± 0.8
140
± 1
356
± 6
1 M
AX
.
56
259
± 2
-HV: SHV-R
SIGNAL OUTPUT: BNC-R
SIGNAL OUTPUT: BNC-R
H2431-50
TPMHA0327EC
-HVSIG
R16
R15
R14
R13
R12
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
P
C8
C6
C4
C3
C2
C1
R17
G
ACC
R1
C13
C12
C9
C7
C5
C10 C11
K
* MAGNETIC SHIELD IS CONNECTED TO GND INSIDE OF THIS PRODUCT.
R1R2, R15
R3, R4, R13R5
R6, R16R7
R8 to R11R12R14R17
C1, C2C3 to C11C12, C13
C14
: 33 kΩ: 390 kΩ: 470 kΩ: 499 kΩ: 360 kΩ: 536 kΩ: 300 kΩ: 150 kΩ: 430 kΩ: 51 Ω: 4700 pF: 0.01 μF: 1000 pF: 2200 pF
C14
-HV: SHV-R
SIGNAL OUTPUT: BNC-R
MAGNETIC SHIELD CASE (t=0.8 mm)
PMT: R2083 (H2431-50)R3377 (H3378-50)
WITH HA TREATMENT
PHOTOCATHODE
60.0 ± 0.5
53.0 ± 1.5
46 MIN.
200
± 1
1 M
AX
.
SIGNAL OUTPUT: BNC-R
-HV: SHV-R
* TO MAGNETIC SHIELD CASE
105 106
107 108
52
500 700 1000 1500 2000 2500 3000
108
SUPPLY VOLTAGE (V)
GA
IN
107
106
105
104
103
102
R4177-06
R1635R2496
R647-01
R12421R12421-300
R4124
500 700 1000 1500 2000 2500 3000
108
SUPPLY VOLTAGE (V)
GA
IN
107
106
105
104
103
102
R5611A-01
R3991A-04
R4125
R1166 R1450
R3478
500 700 1000 1500 2000 2500 3000102
SUPPLY VOLTAGE (V)
GA
IN
103
104
105
106
107
108
R3998-02
R3998-100-02
R7111
R7525
R13449
R6427
● 10 mm (3/8") Dia. and TO-8 types● 13 mm (1/2") Dia. types
● 19 mm (3/4") Dia. types
TPMHB0963EA TPMHB0097EG
● 28 mm (1-1/8") Dia. types
TPMHB0100EF
● 25 mm (1") Dia. types
TPMHB0099EE
500 700 1000 1500 2000 2500 3000
SUPPLY VOLTAGE (V)
GA
IN
107
106
105
104
103
102
108
R1924A
R8619 R4998
R7899-01
R1288A-06
R9800R9800-100
Typical gain characteristics
53
500 700 1000 1500 2000 2500 3000102
SUPPLY VOLTAGE (V)
GA
IN
103
104
105
106
107
108
R9420
R3886A
R11102
R580
R13408
R9420-100
500 700 1000 1500 2000 2500 3500102
SUPPLY VOLTAGE (V)
GA
IN
103
104
105
106
107
108
3000
R331-05
R6041R6041-406R6041-506 R7725
R329-02
R1828-01
R1306
R2083
R7723R6231
R6231-100
● 38 mm (1-1/2") Dia. types
TPMHB0101EF
● 51 mm (2") Dia. types
TPMHB0858EB
● 51 mm (2") Dia. types● 60 mm (2.5") Dia. types
TPMHB0859EB
● 76 mm (3") Dia. types ● 80 mm Dia. types ● 90 mm (3.5") Dia. types● 102 mm (4") Dia. types
TPMHB0107EF
102
SUPPLY VOLTAGE (V)
GA
IN
103
104
105
106
107
108
500 700 1000 1500 2000 2500 3000
R2154-02
R7724
R4607A-06
R13089
R7724-100
R6232
500 700 1000 1500 2000 2500 3000102
SUPPLY VOLTAGE (V)
GA
IN
103
104
105
106
107
108
R12199
R1307
R11410R11065
R6091R10806R10233R6233R6235R6237R10806-100
R6233-100R10233-100
54
104
SUPPLY VOLTAGE (V)
GA
IN
105
106
107
108
109
1010
500 700 1000 1500 2000 2500 3000
R5912-20R7081-20
R12860
TPMHB0657EC
● Metal package types ● Metal package types and assembly type
TPMHB0788EC TPMHB0789EC
● 127 mm (5"), 204 mm (8"), 254 mm (10") and 508 mm (20") Dia. types
TPMHB0860EB
500 700 1000 1500 2000 2500 3000103
SUPPLY VOLTAGE (V)
GA
IN
104
105
106
107
108
R6594
R877R877-100
R5912R5912-100R7081R7081-100
R11833-03R11833-100-03
R1250
102
SUPPLY VOLTAGE (V)
GA
IN
103
104
105
106
107
108
500 700 1000 1500 2000 2500 3000
R5900U-00-L16
H7546BH8804
H7260
H8711
H12700AH13700
H12700A-10
102
SUPPLY VOLTAGE (V)
GA
IN
103
104
105
106
107
108
500 700 1000 1500 2000 2500 3000
R11265
R7600U-00-M4
R8520-406R8520-506
R7600U
55
● Square, Rectangular shape photomultipliers ● Hexagonal shape photomultipliers● 2π shape photomultipliers
TPMHB0966EATPMHB0965EA
● SBA / UBA / EGBA metal package types ● Fine mesh photomultipliers
TPMHB0854EB TPMHB0964EA
500 700 1000 1500 2000 2500 3000
108
SUPPLY VOLTAGE (V)
GA
IN
107
106
105
104
103
102
R6232
R10550
R8997
R6237
R1548-07
R2248
102
SUPPLY VOLTAGE (V)
GA
IN
103
104
105
106
107
108
500 700 1000 1500 2000 2500 3000
R6234R7373A-01
R8143
R6235
500 700 1000 1500 2000 2500 3000102
SUPPLY VOLTAGE (V)
GA
IN
103
104
105
106
107
108
R5924-70R7761-70
R5505-70
500 700 1000 1500 2000 2500 3000102
SUPPLY VOLTAGE (V)
GA
IN
103
104
105
106
107
108
R11265U-200R11265U-300
R11265U-100
R5900U-100-L16R5900U-200-L16
R7600U-100R7600U-200
R7600U-100-M4R7600U-200-M4R7600U-300R7600U-300-M4
56
Voltage distribution ratiosInterstages for the dynodes of a PMT are supplied by a voltage divider network consisting of series resistors, as shown on the right page. The cathode ground scheme (1) is usually used in scintillation counting because it reduces noise resulting from glass scintillation. In fast-pulse light applications, use of the anode ground scheme (2) is suggested. Either scheme requires decoupling (charge-storage) capacitors connected to the last few stages of dynodes in order to maintain the dynode
voltage at a constant value during pulse duration. refer to section 11 and 12 on page 8 to 13 for further details.To free the user from the necessity of designing voltage divider and performing troublesome parts selection, Hamamatsu provides a variety of socket assemblies which enable sufficient performance to be derived from PMT's by making simple connections only.
Voltage distribution ratio
Acc: Grid (Accelerating electrode)
(Note 1)
<Symbols>K: Photocathode G: Grid F: Focusing electrodeDy: Dynode GR: Guard ring P: Anode Acc: Accelerating electrode
Dy3 Dy4 Dy5 Dy6 PDy2Dy1K G1
1.511
1.51.51.52
1.51.51.5
11111111111
111111
1.21111
111111
1.51111
Dy711111121111
Dy8111111
3.32111
11111131111
1015.1111212
12.518.51413
15.512.7
11.521
1.5111
1.51
1.2
14.8—2——————0
11.3223444474
Numberof
stages
8
Voltagedistribution
No.q
w
e
r
t
y
u
i
o
!0
!1
Dy3 Dy4 Dy5 Dy6 PDy2Dy1K G1.8 1 1 1
Acc1
Dy70.5 3
Dy82.5 19.11.24.81.3
stages8
No.!2
Dy3 Dy4 Dy5 Dy6 PDy2Dy1K G1 1 1 1.5
Dy71
Dy81 1
Dy91 13.5113
stages9
No.!3
Dy3 Dy4 Dy5 Dy6 PDy2Dy1K G1111
1.51.811
1.511
1.51
1.51.51
1.51.52
1111111111111111111
1111111111111111111
1111111111111111111
Dy71111111111
1.2111111
1.21
Dy81111111
1.211
1.5111211
1.51
11111
1.51
1.811
2.211131121
Dy91111131
3.611
3.6111
3.611
3.32
Dy100.50.5111
2.51
3.3113
0.7511
3.31131
10.512.51112
17.121.111.517.412.512
18.512.25
1313.521.413.514.520.516
1211
1.51.211
1.5111111
1.5111
—1.5—1
4.84.8—————————————
10.511
1.31.31.51.51.52223333444
stages
10
No.!4
!5
!6
!7
!8
!9
@0
@1
@2
@3
@4
@5
@6
@7
@8
@9
#0
#1
#2
Note 1: Acc should be connected to Dy7 except R4998.
ΣR
ΣR
ΣR
ΣR
Voltage distribution ratios
57
Voltage distribution ratio
Schematic diagram of voltage divider networks(1) Cathode ground scheme (+HV) (2) Anode ground scheme (-HV)
TPMOC0043EB TPMOC0044EB
(Note 2)
(Note 2)
Voltage distribution ratios
Dy3 Dy4 Dy5 Dy6 P
Dy3 Dy4 Dy5 Dy6Dy2GK Dy14 2 2 1
Dy7(Acc)1
Dy81 1
Dy91Dy10
1P
303.5111.5stages
10No.#5
ΣR
Dy3 Dy4 Dy5 Dy6 PDy2Dy1K G1 1 1 1
Dy71
Dy81 1
Dy91Dy10
1Dy11
1 131—2stages
11No.#6
ΣR
Dy3 Dy4 Dy5 Dy6 PDy2Dy1K1 1 1 1
Dy71
Dy81 1
Dy91
Dy102
Dy11 Dy121 18.521.54
stages12
No.$8
ΣR
Dy3 Dy4 Dy5 Dy6 PDy2Dy1K11
11
11
11
Dy711
Dy811
11
Dy9—1
Dy10—1
Dy11 Dy1211
GR0.50.5
12.515
11
11.2
22.3
stages1012
No.%5
%6
ΣR
ΣRDy2G1 G3 G2K Dy10.170.17
0.850.85
1.51.5
11
Dy711
Dy811
11.2
Dy91
1.5
Dy101
2.113
12.4
18.723.9
00
0.180.18
88
Numberof
stages
10
Voltagedistribution
No.#3
#4
Dy2 Dy3 Dy4 Dy5 PDy1GK1.81.822
0.821
1.422
1.6
1111
0.8111111
11111111111
35.721.516
16.213.922
17.116.418
18.526.9
11111111111
Dy61111111111
1.2
Dy71.5111111111
1.5
Dy82.51111111112
Dy93.61.511111111
2.4
4.51.5111111113
8.631112
2.7122
3.9
Dy104
2.51
1.20.55
1.31113
Dy11 Dy121.21.222
1.32
1.611
1.51
32.8—————0——0
11.222
2.53
3.3444
4.3
12
#7
#8
#9
$0
$1
$2
$3
$4
$5
$6
$7
stagesNo.
Dy2 Dy3 Dy4 Dy5 PDy1GK1.81.8
11
11
11
Dy611
29.547.2
Dy71
1.2
Dy81
1.5
Dy912
12.8
1.54
Dy101.55.7
Dy11 Dy1238
Dy132.55
Dy141.21.2
7.57.5
2.52.5
14$9
%0
stagesNo.
Dy2 Dy3 Dy4 Dy5 P
ΣR
ΣR
ΣRG2Dy1K55
3.333.33
1.671.67
11
42.240.6
Dy61.21
Dy71.51
Dy82.21
Dy931
—1.2
—1.5
Dy10—2.2
Dy11 Dy12—3
Dy132.42.4
Dy140.60.6
G100
G33.43.4
00
16.811.3
1014
%1
%2
stagesNo.
Dy2 Dy3 Dy4 Dy5 P ΣRDy1K11
11
11
11
Dy611
Dy711
Dy811
Dy911
11
11
Dy1011
Dy11 Dy1211
Dy1311
Dy14—1
Dy15—1
Dy16—1
Dy17—1
Dy1811
1721
Dy1911
22
1519
%3
%4
stagesNo.
Note 2: Shield should be connected to Dy5.
R
DY.1
R
CATHODE
R R R R R R R R
DY.nANODE Cc
Rd
C C C C
+HV Rd: — 1 MΩCc: — 0.005 μF
R: 100 kΩ — 1 MΩC: 0.01 μF — 0.1 μF
DY.…
R
DY.1
R
CATHODE
DY.2…
R R R R R R R R
DY.nANODE
C C C C-HV R: 100 k — 1 MΩC: 0.01 μF — 0.1 μF
RL
58
Quick reference for PMT socket assemblies
Tubediameter
AssemblytypeNo.
OutlineNo. Notes
Tube type No./
Voltagedistribution
ratio
Refe-rence
page forPMT
feature
2024202020202020202024242026
20
20
202020202020202022222222222222222222222424242422222222
SHV
SHVSHV
AWG22AWG22
SHVSHVSHV
AWG22AWG24
SHV
AWG22
SHV
SHVAWG22
SHV
SHV
AWG22SHV
AWG22
SHIELDCABLE
SHIELDCABLE
SHIELDCABLE
BNC
BNCBNC
RG-174/URG-174/U
BNCBNCBNC
RG-174/UAWG24
BNC
RG-174/U
BNC
BNCRG-174/U
BNC
BNC
RG-174/UBNC
RG-174/U
RG-174/U
RG-174/U
RG-174/U
-1500
-1500-1250-1250-1250-1800-1800-1800-1800-1750+2300
-1500
-1250
-2000-2000-1750-1250-1250-1750-1250-1250-1750-3000
-1500
+1500
-1500
+1500
-1250
-1250-1000-1000-1000-1000-1500-1700-1500-1250+2000
-1000
-1000
-1500-1500-1250-1000-1000-1500-1000-1000-1250-2500
-1000
+1000
-1000
+1000
6 µA is for total of 2 anodes.
Extended pulse linearcharacteristics
with shield case
-HV type
+HV type
-HV type
+HV type
e
t
!6
@3
@7
@0
@5
!0
@1
#0
%3
!3
@6
#0
#1
@3
@4
@3
#8
q
q
r
z
z
x
c
c
v
b
n
m
,
.
⁄0
⁄1
⁄2
⁄3
⁄4
⁄4
⁄5
⁄6
⁄7
⁄8
⁄9
⁄9
E1761-21
E1761-22E849-90E849-99E849-68E974-17E974-22E2253-05E974-19E2037-02E6133-04
E990-29
E2924-500
E2624-14E2624-04
E2183-500
E2183-501
E1198-07E2979-500
E1198-05
E1198-20
E1198-26
E1198-27
R1635R2248R2496R647-01R12421R4124R1166R1450R3478R4125R1548-07R5505-70R3998-02R3998-100-02
R1924A
R7111
R6427
R580R11102R3886A
R2154-02R1828-01
R1306R1307
R6231R6231-100R6232R6233R6233-100R6234R6235R6236R6237R10233R10233-100R10806R10806-100
10 mm(3/8")
13 mm(1/2")
19 mm(3/4")
25 mm(1")
25 mm(1")
28 mm(1-1/8")
28 mm(1-1/8")
38 mm(1-1/2")
51 mm(2")
51 mm(2")
60 mm(2.4")
76 mm(3")
90 mm(3.5")
102 mm(4")
Assembly characteristicsPMT characteristicsMaximum
ratingStandard
rating
(V)
Overall1
voltage
0.35
0.320.280.320.230.270.370.340.270.130.36
0.23
0.24
0.320.370.320.260.260.540.360.360.320.58
0.31
0.31
0.25
0.25
(mA)
Divider2
current(V)
Overallvoltage
H.Vinput
terminal
Signaloutput
terminal
Note:1: When overall voltage is negative (-HV), DC and pulse signals are obtained. When it's positive (+HV), pulse signal is obtained.2: The maximum average anode current is defined as 5 % of divider current.
E2624-14 without connector andflange, tapered circuit voltage
59
-2700-2500
-2700-2500
-2000-2000
-2000
-1500
+1500
-1500
-3000
-2000
+900
-900
-900
-900
-1000
-1000
-1100
-2000
-1500
-1750-1750
-1750
-1250
+1250
-1250
-2000
-1500
+800
-800
-800
-800
-900
-900
-1000
Maximumrating
Standardrating
(V)
Overall1
voltage
0.5
0.42
0.450.38
0.5
0.32
0.32
0.32
0.68
0.36
0.036
0.3
0.3
0.34
0.33
0.34
0.29
(mA)
Divider2
current(V)
Overallvoltage
Note:1: When overall voltage is negative (-HV), DC and pulse signals are obtained. When it's positive (+HV), pulse signal is obtained.2: The maximum average anode current is defined as 5 % of divider current.
Tubediameter
AssemblytypeNo.
OutlineNo. Notes
Tube type No./
Voltagedistribution
ratio
Refe-rence
page forPMT
feature
22222222222222
22
22
22
22
22
25
24
24
24
24
24
24
SHV
SHV
SHVSHV
SHV
SHIELDCABLE
SHIELDCABLE
SHV
SHV
SHV
SHIELDCABLE
SHIELDCABLE
SHIELDCABLE
SHIELDCABLE
SHIELDCABLE
SHIELDCABLE
AWG22
BNC
BNC
BNCBNC
BNC
RG-174/U
RG-174/U
BNC
BNC
BNC
SHIELDCABLE
RG-174/U
0.8D-QEV
0.8D-QEV
RG-174/U
RG-174/U
RG-174/U
$7
$4
$5
i
#2
!7
$9
%1
!5
@2
@2
!6
$1
$1
!4
E5859
E5859-01
E5859-11E5859-15
E5859-19
E1198-22
E1198-23
E6316-01
E7693
E7694-02
E13416
E5996
E7083
E6736
E11807
E11807-01
E10679-02
R329-02R6091R329-02R331-05R6091R7725R7723R7724R7724-100
R877R877-100
R1250
R5912
R7081
R8520-406R8520-506
R7600UR7600U-03R7600U-100R7600U-200R7600U-300R7600U-00-M4R7600U-100-M4R7600U-200-M4R7600U-300-M4R5900U-00-L16R5900U-100-L16R5900U-200-L16R11265UR11265U-100R11265U-200R11265UR11265U-100R11265U-200R9880U-110R9800U-210
51 mm(2")
76 mm(3")
127 mm(5")
204 mm(8")
254 mm(10")
26 mmsquare
type
30 mmsquare
type
16 mmTO-8
Assembly characteristicsPMT characteristics
H.Vinput
terminal
Signaloutput
terminal
22
23
24
25
20
20
20
20
20
26
27
28
29
29
30
shield case is available.+HV type (E5859-02) is available.
shield case is available.+HV type (E5859-03) is available.
shield case is available.-HV type
shield case is available.+HV type
-HV typewith rear panel connector
+HV type, (E7694-03) is available
Active base type (E6572) is available.
E11807 with tapered voltagedriver circuit.
SHV / BNC connector typeE10679-03 is available
21
21
60
TACCA0075EB TACCA0076EC
TACCA0077ED
TACCA0210EB
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
DY10
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
C3
C2
C1
P
K
7
8
6
9
4
11
3
12
2
13
10
5
R1R3
R2, R4 to R11C1 to C3
: 1 MΩ: 510 kΩ: 330 kΩ: 10 nF
SOCKETPIN No.PMT
SIGNAL OUTPUTRG-174/U (BLACK)
SIGNAL GND
POWER SUPPLY GNDAWG22 (BLACK)
-HVAWG22/TFE (VIOLET)
E1761-21(For R1635)
E1761-22(For R2496)
10.6 ± 0.2
50.0
± 0
.545
0 ±
10
HOUSING(INSULATOR)
SIGNAL OUTPUT: RG-174/U (BLACK)BNC CONNECTOR
-HV: SHIELD CABLE (GRAY)SHV CONNECTOR
SOCKET: E678-11N
3
11R1
K
R2
R3R4
DY1 2
R5DY2 10
R6DY3 3
R7DY4 9
R8DY5 4
R9
P
C1DY6 8
R10 C2DY7 5
R11 C3DY8 7
SIGNAL OUTPUT : RG-174/U (BLACK)BNC CONNECTOR
-HV: SHIELD CABLE (GRAY)SHV CONNECTOR
6PMT
SOCKETPIN No.
R1 to R11C1 to C3
: 330 kΩ: 10 nF
11R1
K
R2DY1 2
R4DY2 10
R3
R5DY3 3
R6DY4 9
R7DY5 4
R8
P
C1DY6 8
R9 C2DY7 5
R10 C3DY8 7
SIGNAL OUTPUT: RG-174/U (BLACK)BNC CONNECTOR
-HV: SHIELD CABLE (GRAY)SHV CONNECTOR
6
PMTSOCKETPIN No.
R1 to R4R5 to R10 C1 to C3
: 510 kΩ: 330 kΩ: 10 nF
13K
R4DY3 2
R6
DY4 10
R2DY1 1
R1
R3DY2 11
R7DY6 9
R5DY5 3
R8DY7 4
R9
P
DY8 8
R10 C2
C1DY9 5
R11 C3DY10 7
6SIGNAL OUTPUT: RG-174/U (BLACK)BNC CONNECTOR
-HV: SHIELD CABLE (RED)SHV CONNECTOR
PMT SOCKETPIN No.
R1 to R11C1 to C3
: 330 kΩ: 10 nF
14.0 ± 0.3
45.0
± 0
.5
510
0.5
MA
X.
12.6
12.4
POTTINGCOMPOUND
HOUSING(INSULATOR)
450
+20
-0
E849-68(For R4124)
E849-99(For R12421)
14.0 ± 0.3
45.0
± 0
.545
0 ±
10
510
0.5
MA
X.
12.6
12.4
POTTINGCOMPOUND
HOUSING(INSULATOR)
Dimensional outline and circuit diagramsFor PMT socket assembliesz E1761-21, E1761-22
x E849-90
c E849-68, E849-99
R12
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
DY10
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
C3
C2
C1
P
K
6
7
5
8
3
10
2
11
1
13
9
4
R1 to R12C1 to C3
: 330 kΩ: 0.01 µF
SOCKETPIN No.PMT
SIGNAL OUTPUTRG-174/U (BLACK)
GNDAWG22 (BLACK)
-HVAWG22/TFE (VIOLET)
(Unit: mm)
61
TACCA0212EB TACCA0078EC
TACCA0079EB TACCA0230EB
TACCA0028EC TACCA0231EB
SIGNAL OUTPUT: RG-174/U (BLACK)
GND: AWG22 (BLACK)
R1R2 to R7
R8,R11 to R13R9, R10
R14 to R16C1 to C3
: 499 kΩ: 330 kΩ: 390 kΩ: 300 kΩ: 360 kΩ: 10 nF
17.4 ± 0.2
23.0 ± 0.5
43.0
± 0
.547
.5 ±
1.0
450
105
HOUSING(INSULATOR)
SOCKET: E678-12H
P
R15 C3
R16
R14DY10
R13
C2
6
K
R12
C1
R11DY9
R104
R9DY8
R87
DY7R7
3
DY6R6
8
DY5R5
2
DY4R4
9
DY3R3
1
DY2R2
10
DY1
R1
12
-HV: AWG22/TFE (VIOLET)
5
11
+20 -0
5
GND: AWG22 (BLACK)
SIGNAL OUTPUT: RG-174/U (BLACK)
-HV: AWG22 (VIOLET)
PMT SOCKETPIN No.
24 ± 0.5
30.0
± 0
.545
0 ±
10
2
21.9
2 R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
DY10
DY9
DY8
DY7
DY7
DY6
DY5
DY4
DY3
DY2
DY1
C3
C2
C1
SIGNAL OUTPUT2: AWG24(RED)
: 2.7 MΩ: 680 kΩ: 1 MΩ: 10 nF
R1R2, R4 to R11
R3C1 to C3
-HV: AWG24/TFE (VIOLET)
P
K
8
7
9
6
10
11
5
12
4
13
3
14
2
17
POWER SUPPLY GND: AWG24(BLACK)
SOCKETPIN No.PMT
SIGNAL OUTPUT1: AWG24(YELLOW)
SIGNAL GND: AWG24(BLACK)
HOUSING(INSULATOR)
POTTINGCOMPOUND
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
DY10
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
C3
C2
C1
P
K
5
6
4
7
2
9
1
10
12
11
8
3
23.0 ± 0.5
47.5
± 1
.045
0 ±
10
43.0
± 0
.5
17.4 ± 0.2
-HV: SHIELD CABLE (GRAY)SHV CONNECTOR
R1R2 to R11C1 to C3
: 510 kΩ: 330 kΩ: 10 nF
SIGNAL OUTPUT: RG-174/U (BLACK)BNC CONNECTOR
SOCKETPIN No.PMT
POTTINGCOMPOUND
HOUSING(INSULATOR)
E974-17, -18 attaches BNC and SHV connector at the end of cables.
SIGNAL OUTPUT: RG-174/U (BLACK)BNC CONNECTOR
+HV: SHIELD CABLE (GRAY)SHV CONNECTOR
R1R2 to R18
R19R20, R21
R22 to R24C1 to C5
C6, C7
: 10 kΩ: 330 kΩ: 100 kΩ: 1 MΩ: 51 Ω: 10 nF: 4.7 nF
22.0 ± 0.5
24.0 ± 0.5
255
.0 ±
0.5
450
± 1
0
HOUSING(INSULATOR)
DY15
P
R24
R1
R20
R17 C49
R18 C5
R19 C7
C6
DY14R23
R16 C311
DY13R22
R15 C28
R21
K
DY12R14 C1
12
DY11R13
7
DY10R12
13
DY9R11
6
DY8R10
14
DY7R9
5
DY6R8
15
DY5R7
4
DY4R6
16
DY3R5
3
DY2R4
17
DY1R3
2
R2
SIGNAL OUTPUT: RG-174/U (BLACK)BNC CONNECTOR
+H.V: SHIELD CABLE (GRAY)SHV CONNECTOR
10
1
POTTINGCOMPOUND
PMT SOCKETPIN No.
v E974-17 b E974-22
n E2253-05
, E2037-02
m E974-19
. E6133-04
11K
DY2
12
R4DY3 1
R3
DY1R2
R1
R5DY4 9
R6DY5 2
R7DY6 8
R8
P
DY7 3
C3
R9 C1DY8 7
R10 C2DY9 4
5
R11DY10
SIGNAL OUTPUT: RG-174/U (BLACK)BNC CONNECTOR
-HV: SHIELD CABLE (GRAY)SHV CONNECTOR
10
6
PMTSOCKETPIN No.
R1R3
R2, R4 to R11C1 to C3
: 680 kΩ: 510 kΩ: 330 kΩ: 10 nF
21.0 ± 0.3
40.0
± 0
.5
POMHOUSING
POTTINGCOMPOUND
450
+20
-0
55.0
± 0
.5
HOUSING(INSULATOR)
11K
R6DY3 1
R8
DY4 9
R4DY1 12
R5DY2 10
R9DY6 8
R7DY5 2
R10DY7 3
P
DY8 7C2
R11 C3
C1
R1R2R3
6.2
5
POTTINGCOMPOUND
SIGNAL OUTPUT: RG-174/U (BLACK)BNC CONNECTOR
-HV: SHIELD CABLE (GRAY)SHV CONNECTOR
PMT SOCKETPIN No.
18.6+0 -0.4
R1R2R3
R4, R6 to R11R5
C1 to C3
: 1 MΩ: 750 kΩ: 560 kΩ: 330 kΩ: 510 kΩ: 10 nF
450
+20
-0
62
: 1320 kΩ: 510 kΩ: 330 kΩ: 51 Ω: 10 nF: 4.7 nF
R1 R3
R2, R4 to R11R12 to R14
C1 to C3C4
13R1
K
R84
R9 C1
C4
9
R10 C25
R11 C3Dy10 8
Dy9
Dy8
Dy7R7
10Dy6R6
3Dy5R5
11Dy4R4
2Dy3R3
12Dy2R2
14Dy1
-HV: SHIELD CABLE (GRAY)SHV CONNECTOR
P
7
SIGNAL OUTPUT : RG-174/U (BLACK)BNC CONNECTOR
PMT SOCKETPIN No.
R14
R13
R12
28.0 ± 0.5
26.0 ± 0.3
44.0 ± 0.3
35.0 ± 0.3
30.0
± 0
.3
43.0
± 0
.5
7
450
± 1
0
2- 3.5
0.8
POTTINGCOMPOUND
HOUSING(INSULATOR)
49.0
± 0
.545
0 ±
10
105
4
13
K
9
R9 C3
C1
C2
R10 C45
R11 C5 C6Dy10 8
Dy9
Dy8R8
4Dy7R7
10Dy6R6
3Dy5R5
11Dy4R4
2Dy3R3
12R2
R114Dy1
Dy2
-HV : AWG22/TFE(VIOLET)
P
SIGNAL OUTPUT : RG-174/U (BLACK)
GND : AWG22 (BLACK)
25.2 ± 0.5
32.0 ± 0.57
PMT SOCKETPIN No.
R14
R13
R12HOUSING(INSULATOR)
POTTINGCOMPOUND
SIGNAL GND
R1R2, R4 to R6
R3, R8R7R9
R10R11
R12 to R14C1
C2, C3C4 to C6
: 800 kΩ: 200 kΩ: 300 kΩ: 240 kΩ: 400 kΩ: 660 kΩ: 600 kΩ: 51 Ω: 10 nF: 22 nF: 33 nF
34.0 ± 0.3
40.0
± 0
.545
0 ±
10
HOUSING(INSULATOR)
8.2
52.0 ± 0.5
POTTINGCOMPOUND
K
SOCKETPIN No.PMT
SIGNAL OUTPUT:RG-174/U (BLACK)BNC CONNECTOR
-HV: SHIELD CABLE (GRAY)SHV CONNECTOR
R1
C4
R12
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
C3
C2
C1
P
DY10
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
6
7
5
8
4
9
3
10
2
11
1
12
R1R2
R3 to R12C1 to C3
C4
: 10 kΩ: 660 kΩ: 330 kΩ: 10 nF: 4.7 nF
12
K
R108
C5
R1
5
7
C4
Dy10
Dy9
Dy8R9
4Dy7R8
9Dy6R7
3Dy5R6
10Dy4R5
2Dy3R4
11Dy2R3
1Dy1R2
C2
C1
-HV: SHIELD CABLE (GRAY)SHV CONNECTOR
P
6
SIGNAL OUTPUT: RG-174/U (BLACK)BNC CONNECTOR
R13R14
C3R11R12
PMT SOCKETPIN No.
R15 R1R2, R11, R13R3 to R7, R14
R8R9
R10R12R15C1C2C3C4C5
: 10 kΩ: 300 kΩ: 150 kΩ: 180 kΩ: 220 kΩ: 330 kΩ: 240 kΩ: 51 Ω:10 nF: 22 nF: 47 nF: 100 nF: 4.7 nF
⁄2 E2624-14 ⁄3 E2624-04
⁄4 E2183-500, E2183-501
TACCA0082EC TACCA0084ED
TACCA0086ECTACCA0166EC
E2183-500 E2183-501
⁄1 E2924-500
TACCA0081EC
26.0 ± 0.3
43.0
± 0
.545
0 ±
10
28.0 ± 0.5
70.
8
35.0 ± 0.3
44.0 ± 0.3
30.0
± 0
.3
2- 3.5
1
K
R1111
R12 C2
C4
6
R13 C310Dy10
Dy9
Dy8R10
5Dy7R9
12Dy6R8
4Dy5R7
13Dy4R6
3Dy3R5
14Dy2R4
2Dy1R3
R2
R1
C1
-HVSHIELD CABLE (GRAY)SHV CONNECTOR
P
7SIGNAL OUTPUTRG-174/U (BLACK)BNC CONNECTOR
HOUSING(INSULATOR)
PMT SOCKETPIN No.
POTTINGCOMPOUND
R1 to R13C1 to C3
C4
: 330 kΩ: 10 nF: 4.7 nF
TACCA0215EC
14K
G
R4DY3
2
R6DY4
12
R2DY1
1R1
R3DY2
13
R7DY6
10
R5
DY5
3
R8DY7
5
R9
P
DY8
9
R10 C2
C1
DY9
6
R11 C38
7
R1R2 to R6,R8 to R11
R7C1 to C3
: 1 MΩ: 330 kΩ: 510 kΩ: 10 nF
26.0 ± 0.3
7
43.0
± 0
.5 0.8
450
± 1
0
28.0 ± 0.5
POTTINGCOMPOUND
HOUSING(INSULATOR)
PMT SOCKETPIN No.
SIGNAL OUTPUTRG-174/U (BLACK)
POWER SUPPLY GNDAWG22 (BLACK)
-HVAWG22/TFE (VIOLET)
SIGNAL GND
2- 3.5
44.0 ± 0.3
35.0 ± 0.3
30.0
± 0
.3
⁄0 E990-29
(Unit: mm)
63
The housing is internallyconnected to the GND.
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
C3
C2
C1
C4
10
9
8
7
6
5
4
3
2
1
14
11
DY10
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
K
P
56.0 ± 0.3
450
± 1
0
64.0 ± 0.3
38.0
± 0
.5
HOUSING(METAL)
POWER SUPPLY GNDAWG22 (BLACK)
SIGNAL OUTPUTRG-174/U (BLACK)
R1R2 to R11C1 to C3
C4
: 680 kΩ: 330 kΩ: 10 nF: 4.7 nF
-HVAWG22/TFE (VIOLET)
SIGNAL GNDSOCKETPIN No.
PMT
3-M2
62.0 ± 0.5
164.
0 ±
0.5
82.0
± 0
.5
11
-H.V : SHV-R
-H.V
SIG
19
20KG1
G2ACC
R116
C1
R1
13
7C4
C5 C8
C6 C9C11
12
8
11
DY7
DY10
DY12
DY11
DY9
DY8
DY6
DY5
R1014
R95
R815DY4
DY3
DY2
R73
R617
R52DY1
R4
R3
R2
C2
P10
C3R12
R13
R14
R15R16
R17R18
R19
R20
R21C7 C10
R1R2, R5
R3, R7 to R12, R18R4, R6
R13 to R17R19 to R21
C1C2 to C8, C11
C9C10
: 10 kΩ: 240 kΩ: 200 kΩ: 360 kΩ: 300 kΩ: 51 Ω: 470 pF: 10 nF: 22 nF: 33 nF
The housing is internallyconnected to the GND.
MAGNETICSHILD CASE
HOUSING(METAL)
SIGNALOUTPUT: BNC-R
PMT SOCKETPIN No.
SIGNAL OUTPUTBNC CONNECTOR
-HVSHV CONNECTOR
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
C3
C2
C1
C4
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
K
G
P
56.0 ± 0.3
450
± 1
0
64.0 ± 0.3
38.0
± 0
.5
GNDAWG22 (BLACK)
SIGNAL OUTPUTRG-174/U (BLACK)
R1 to R10C1 to C3
C4
: 330 kΩ: 10 nF: 4.7 nF
-HVAWG22/TFE (VIOLET)
HOUSING(METAL)
The housing is internallyconnected to the GND.
8
7
6
5
4
3
2
1
13
14
11
SOCKETPIN No.PMT
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
R11
C3
C2
C1
C4
C5
8
7
6
5
4
3
2
1
13
14
11
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
K
G
P
56.0 ± 0.3
450
± 1
0
64.0 ± 0.3
38.0
± 0
.5
+HVSHIELD CABLE (GRAY)
SIGNAL OUTPUTRG-174/U (BLACK)
R1 to R11C1 to C3
C4, C5
: 330 kΩ: 10 nF: 4.7 nF
The housing is internallyconnected to the GND.
HOUSING(METAL)
SOCKETPIN No.PMT SIGNAL GND
POWER SUPPLY GND
56.0 ± 0.3
450
± 1
0
64.0 ± 0.3
38.0
± 0
.5
HOUSING(METAL)
C4
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2 R1
C3
C2
C1
11
10
7
6
5
4
3
1
13
14
12
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
K
G
P
The housing is internallyconnected to the GND.
-HVSHIELD CABLE (GRAY)
POWER SUPPLY GND
R1R2, R3
R4 to R11C1 to C3
C4
: 10 kΩ: 680 kΩ: 330 kΩ: 10 nF: 4.7 nF
SIGNAL OUTPUTRG-174/U (BLACK)
SIGNAL GNDSOCKETPIN No.PMT
The housing is internallyconnected to the GND.
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
R11R12
R13
C3
C2
C1
C4
C5
11
10
7
6
5
4
3
1
13
14
12
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
K
G
P
R1 to R2R3 to R11
R12R13
C1 to C3C4, C5
: 680 kΩ: 330 kΩ: 10 kΩ: 1 MΩ: 10 nF: 4.7 nF
+HVSHIELD CABLE (GRAY)
SIGNAL OUTPUTRG-174/U (BLACK)
SIGNAL GND
POWER SUPPLY GND
SOCKETPIN No.PMT
⁄5 E1198-07 ⁄6 E2979-500
⁄7 E1198-05 ⁄8 E1198-20
TACCA0220EB TACCA0093EB
TACCA0221EB TACCA0223EC
⁄9 E1198-26, E1198-27
TACCA0224EB TACCA0225EB
E1198-26 E1198-27
64
E5859 taper bleeder circuit(For R329/R331-05/R6091)
E5859-01 standard bleeder circuit(For R329/R6091)
E5859-11(For R7725)
E5859-15(For R7723)
E5859-19(For R7724)
R1R2 to R6,R9 to R13
R7, R8R14 to R21,
R23, R24R22R25
R26,R27C1
C2,C3C4
: 10 kΩ
: 220 kΩ: 154 kΩ
: 110 kΩ: 0 Ω: 51 Ω: 100 Ω: 470 pF: 10 nF: 22 nF
Dy12
Dy11
Dy10
Dy9
Dy7
Dy6Dy5
Dy4Dy3
Dy2Dy1
P
G
K
Dy8
R1
C1
R23
R24
R27
R18R19
R25
R20
R21
R22
R26
R16
R17
R15
R14
R13
R11
R12
R10
R9
R8
R7
R6R5R4R3R2
C2
C3
C4
1
17
21
16
2
15
3
14
4
13
5
12
6
8
7
-HVSHV-R
SH 10
The housing is internallyconnected to the GND.
SIGNAL OUTPUTBNC-R
PMT SOCKETPIN No.
TACCA0176EC TACCA0178EC
TACCA0360EATACCA0359EA TACCA0361EA
58.0 ± 0.5
51.0 ± 0.4
60.0 ± 0.5
12.5
9
55.
0 ±
0.5
-HV:SHV-R
-H.V
SIG
3-M2(THREADED HOLESFOR INSTALLATIONOF MAGNETICSHIELD CASE)
HOUSING(METAL)
SIGNAL OUTPUT:BNC-R
E5859, E5859-01, E5859-11, E5859-15, E5859-19
R1R2, R12, R16, R17, R20, R21R3, R13, R18,
R19, R22 to R24R4, R5, R7, R8R6, R9 to R11,
R14, R15R25
R26, R27C1C2C3C4
C5 to C7
: 10 kΩ
: 180 kΩ
: 226 kΩ: 121 kΩ
: 150 kΩ: 51 kΩ: 100 Ω: 470 pF: 22 nF: 47 nF: 100 nF: 220 nF
Dy12
Dy11
Dy10
Dy9
Dy7
Dy6Dy5
Dy4Dy3
Dy2Dy1
P
G
K
Dy8
R1
C1
R23
R24
R27
R18R19
R25
R20
R21
R22
R26
R16
R17
R15
R14
R13
R11
R12
R10
R9
R8
R7
R6R5R4R3R2
C2
C3
C4
C5
C6 C7
1
17
21
16
2
15
3
14
4
13
5
12
6
8
7
-HVSHV-R
SH 10
The housing is internallyconnected to the GND.
SIGNAL OUTPUT: BNC-R
PMT SOCKETPIN No.
R1R2 to R9, R15, R16, R18, R20, R21, R23
R10 to R14, R17, R19, R22, R24
R25 to R27C1
C2, C3C4
: 10 kΩ
: 330 kΩ
: 0 Ω: 51 Ω: 470 pF: 10 nF: 22 nF
Dy8
Dy7
Dy6
Dy5
Dy4
Dy3
Dy2
Dy1
P
KR1
C1
R23
R24
R27
R18
R19
R25
R20
R21
R22
R26
R16
R17
R15
R14
R13
R11R12
R10
R9
R8R7
R6
R5
R4
R3
R2
C2
C3
C4
1
21
16
2
15
5
12
6
8
7
-HVSHV-R
SIGNAL OUTPUTBNC-R
CASE GND
PMT SOCKETPIN No.
R1R2 to R11, R20
R12, R13R14 to R19,
R21 to R24R25
R26, R27C1
C2, C3C4
: 10 kΩ: 220 kΩ: 0 Ω
: 110 kΩ: 51 Ω: 100 Ω: 470 pF: 10 nF: 22 nF
Dy10
Dy9
Dy8
Dy7
Dy5
Dy4
Dy3
Dy2
Dy1
P
K
Dy6
R1
C1
R23
R24
R27
R18
R19
R25
R20
R21
R22
R26
R16
R17
R15
R14
R13
R11R12
R10
R9
R8R7
R6
R5
R4
R3
R2
C2
C3
C4
1
21
16
2
15
3
13
5
12
6
8
7
-HVSHV-R
SIGNAL OUTPUTBNC-R
PMT SOCKETPIN No.
CASE GND
20
R1R2 to R13, R20
R14 to R19, R21 to R24
R25R26, R27
C1C2, C3
C4
: 10 kΩ: 220 kΩ
: 110 kΩ: 51 Ω: 100 Ω: 470 pF: 10 nF: 22 nF
Dy12
Dy11
Dy10
Dy9
Dy7
Dy6
Dy5
Dy4
Dy3
Dy2
Dy1
P
K
Dy8
R1
C1
R23
R24
R27
R18
R19
R25
R20
R21
R22
R26
R16
R17
R15
R14
R13
R11R12
R10
R9
R8R7
R6
R5
R4
R3
R2
C2
C3
C4
1
21
16
2
15
3
14
4
13
5
12
6
8
7
-HVSHV-R
SIGNAL OUTPUTBNC-R
PMT SOCKETPIN No.
CASE GND
(Unit: mm)
65
TACCA0089EB
E1198-22 E1198-23
TACCA0168EB TACCA0169EC
56.0 ± 0.3
450
± 1
0
64.0 ± 0.3
38.0
± 0
.5
HOUSING(METAL)
SIGNAL GND
POWER SUPPLY GND
SIGNAL OUTPUTRG-174/U (BLACK)
SOCKETPIN No.PMT
R1R2 to R13
C1 to C3C4
: 10 kΩ: 330 kΩ: 10 nF: 4.7 nF
R1
C4
-HVSHIELD CABLE (GRAY)
R13
R12
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
C3
C2
C1
11
10
9
8
7
6
5
4
3
2
1
13
14
DY10
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
K
G
P
* The housing is internally connected to the GND.
** High voltage shielded cable can be connected to a connector for RG-174/U.
SIGNAL GNDSIGNAL OUTPUTRG-174/U (BLACK)
P
K
SOCKETPIN No.
G
PMT
C4 R14
C5
C6
+HVSHIELD CABLE (GRAY)
POWER SUPPLY GNDDY10
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
R13
R12
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
11
10
9
8
7
6
5
4
3
2
1
13
14
C3
C2
C1
R1 to R12R13R14
C1 to C4C5, C6
: 330 kΩ: 1 MΩ: 10 kΩ: 10 nF: 4.7 nF
* The housing is internally connected to the GND.** High voltage shielded cable can be connected to
a connector for RG-174/U.
-HV : SHV-R
HOUSING(METAL)
THREADED HOLESFOR INSTALLATIONOF MAGNETICSHIELD CASE(e. g; E989-60 FOR R877
E989-61 FOR R878)
SIGNAL OUTPUT: BNC-R
-H.V
SIG
51.5
± 0
.5
64.0 ± 0.5
13
14K
G
R118
C4
R1
9
10C3
Dy10
Dy9
Dy8R10
7Dy7R9
6Dy6R8
5Dy5R7
4Dy4R6
3Dy3R5
2Dy2R4
1Dy1R3
R2
C1
-HV: SHV-R
P11
SIGNAL OUTPUT : BNC-R
C2R12
R13
PMT SOCKETPIN No.
TO AL HOUSING
Note: Magnetic shield case is available to order separately.
The housing is internallyconnected to the GND.
R1R2 to R13C1 to C3
C4
: 10 kΩ: 330 kΩ: 10 nF: 4.7 nF
E1198-22, E1198-2321
E6316-0122
66
TACCA0234ED
TACCA0162ED TACCA0158EE
R1 to R3R4 to R11
R12 to R14R15
C1 to C3
: 330 kΩ: 220 kΩ: 51 Ω: 1 MΩ: 10 nF
DY10
30
24
23
22
21
20
19
7
6
5
4
1
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1K
C3P
POWER SUPPLY GND
C2
C1
R11
R9
R8
R7
R6
R5
R4
R3
R2
R1
R10
R14
R12
R15
R13
SIGNAL OUTPUTRG-174/U (BLACK)
-HVSHIELD CABLE (RED)
PMTSOCKETPIN No.
SIGNAL GND30.0 ± 0.5
30.0
± 0
.515
.0 ±
0.545
0 ±
10
PIN No.1
HOUSING(INSULATOR)
POTTINGCOMPOUND
30.0 ± 0.5
30.0
± 0
.515
.0 ±
0.5
450
± 1
0
PIN No.1
P4
P3
P1
GUIDE MARK
POTTINGCOMPUND
P2
-HV: SHIELD CABLE (RED)
R1 to R3R4 to R11
R12 to R14R15
C1 to C3
: 330 kΩ: 220 kΩ: 51 Ω: 1 MΩ: 10 nF
DY10
27
15
11
31
24
23
22
21
20
19
7
6
5
4
1
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1K
C3P4 P3 P2 P1
P4
P3
P2
P1
C2
C1
R11
R9
R8
R7
R6
R5
R4
R3
R2
R1
R10
R14
R12
R15
R13
SIGNAL OUTPUT: 0.8D-QEV (GRAY)
P1 to P4: SIGNAL OUTPUT0.8D-QEV (GRAY)
HOUSING(INSULATOR)
SIGNAL GND
POWER SUPPLY GND
-HV: SHIELD CABLE (RED)
PMTSOCKETPIN No.
26
10
24
8
2
18
31
15
32
16K
Dy10
Dy9
Dy8
Dy7
Dy6
Dy5
Dy4
Dy3
Dy2
Dy1
R7
R6
R5
R4
R3
R2
R1R15
R14
R13
R12
1213111972062152242332729
•
•
•
•
•
•
•
•
•
•
•
•
•
28
P16
P15
P14
P13
P12
P11
P10 P9
P8
P7
P6
P5
P4
P3
P2
P1
P16
P8
P1
-HV: SHIELD CABLE (RED)
R1 to R11R12 to R14
R15C1 to C3
: 220 kΩ: 51 Ω: 1 MΩ: 10 nF
30.0 ± 0.5
30.0
± 0
.5
Pin No.1
15.0
± 0
.545
0 ±
10
HOUSING(INSULATOR)
R11
R10
R9
R8
C3
C2
C1
17
PMT SOCKETPIN No.
POWER SUPPLY GND
SIGNAL GND
SIGANL OUTPUT: 0.8D-QEV (GRAY)
P15 P16 P14GUIDE MARKE
-HV: SHIELD CABLE (RED)P3 P1 P2
P13 P11 P9 P7 P5
P12P10P8P6P4
P1 to P16 : SIGNAL OUTPUT0.8D-QEV (GRAY)
E708327
E599626
E673628
TACCA0356EA
+H
V
SIG
Dy1
GR1
R2
R3
R4
R5
R6
R7
R8
R9
R10
R11R14
R12
C1
R13
K
Dy2
Dy3
Dy4
Dy5
Dy6
Dy7
Dy8
Dy9
Dy10C2
C3
C5
R15
R16
R17 R19
R18
C4
P
SIGNAL OUTPUT: RG-196A/U (WHITE)
+HV: RG-188A/U (WHITE)
R1, R13R2
R3 to R12R14 to R16
R17, R19R18
C1 to C3C4, C5
: 1 MΩ: 3 MΩ: 2 MΩ: 51 Ω: 10 kΩ: 100 kΩ: 22 nF: 10 nF
SIGNAL OUTPUTRG-196A/U (WHITE)
+HVRG-188A/U (WHITE)
LOCK TIE(TEFLON)
27.0 ± 0.5 9.2 ± 0.5
27.0
± 0
.510
515
00+
50 -0
PGA SOCKET(GLASS EPOXY)
DIVIDER PCB(GLASS EPOXY)
E1341625
TACCA0227EC TACCA0229EB
E769323 E7694-0224
19
20K
7
R1912
R208
R21 R18
R17
R16
R15
R14
C5
C4
C3
C2
C1
C6
R13
R12
R11
R10
R9
R8
R7
R6
R5
R4R3
R2 R1
Dy14 11
Dy13
Dy12
Dy11
13Dy10
6Dy9
14Dy8
3Dy3
16Dy4
4Dy5
15Dy6
5Dy7
17Dy2
2Dy1
P
10
SIG
-H.V
G1
G2
R1R2, R18
R3R4R5R6
R7 to R14R15, R16
R17R19
R20, R21C1C2C3C4C5C6
: 10 kΩ: 240 kΩ: 360 kΩ: 390 kΩ: 120 kΩ: 180 kΩ: 100 kΩ: 150 kΩ: 300 kΩ: 51 Ω: 100 Ω: 22 nF: 47 nF: 100 nF: 220 nF: 470 nF: 0.47 nF
The housing is internallyconnected to the GND.
-HV: SHV-R
SIGNAL OUTPUT: BNC-R
PMT SOCKETPIN No.
74.0 ± 0.5
100.
0 ±
0.5
-HV: SHV-R
HOUSING(METAL)
SIGNALOUTPUT: BNC-R
192
20K
R22
R23
R24 R21
R20
R19
R14
C3
C2
C1
C4
R13
R12
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2 R1
12
R15
Dy10
7Dy9
13Dy8
17Dy2
3Dy3
16Dy4
1Dy1
F1F2F3
P
8
R1R2 to R4R5, R18R6, R13
R7R8, R21R9, R16
R10, R12, R20R11
R14, R17R15R19
R22 to R24C1 to C3
C4
: 10 kΩ: 510 kΩ: 150 kΩ: 33 kΩ: 27 kΩ: 240 kΩ: 100 kΩ: 300 kΩ: 200 kΩ: 120 kΩ: 47 kΩ: 220 kΩ: 51 Ω: 10 nF: 0.47 nF
18
-HV: SHV-R
SIGNAL OUTPUT: BNC-R
PMT SOCKETPIN No.
74.0 ± 0.5
100.
0 ±
0.5
-HV: SHV-R
SIG
-H.V
HOUSING(METAL)
SIGNALOUTPUT: BNC-R
4Dy5R16
14Dy6R17
R185Dy7
CASE GND
(Unit: mm)
67
TACCA0314EA
TACCA0299EA TACCC0165EA
E11807 E11807-01
27
26
DY1
K
P
DY2
R2
R1R21
R18
R19
R20
R3
R4
25DY3R5
23DY4R6
22DY5R7
21DY6R8
14DY7R9
13DY8R10
12DY9R11
10DY10R12
9DY11R13 C1
C2
C3
8DY12
R14
R15
R16
R17
7
1 -HVSHIELD CABLE (RED)
SIGNAL OUTPUTRG-174/U (BLACK)
R1R2, R7 to R13
R3, R4R5, R6
R14 to R16R17
R18 to R20R21
C1 to C3
: 300 kΩ: 200 kΩ: 130 kΩ: 160 kΩ: 100 kΩ: 0 Ω: 51 Ω: 1 MΩ: 10 nF
SOCKETPIN No.
PMT PMT
27
26
DY1
K
P
DY2
R2
R1R21
R18
R19
R20
R3
R4
25DY3R5
23DY4R6
22DY5R7
21DY6R8
14DY7R9
13DY8R10
12DY9R11
10DY10R12
9DY11R13 C1
C2
C3
8DY12
R14
R15
R16
R17
7
1 -HVSHIELD CABLE (RED)
SIGNAL OUTPUTRG-174/U (BLACK)
R1R2, R14, R15
R3, R4R5 to R13R16, R17
R18 to R20R21
C1 to C3
: 300 kΩ: 200 kΩ: 120 kΩ: 150 kΩ: 100 kΩ: 51 Ω: 1 MΩ: 10 nF
SOCKETPIN No.
26.0
± 0
.545
0 ±
10
15.0
± 0
.510
5
26.0 ± 0.5
PIN No.1
POMHOUSING
POTTINGCOMPOUND
ORIENTATIONBY MARKING
NOTE: Don't touch socket holes while high voltage is supplied in circuit.
17.5+0.5 -0
0.5
25
105
24+
0.5
-045
0 ±
10
-HV: AWG22 (VIOLET)
HOUSING(INSULATOR)
POWER SUPPLY GND: AWG22 (BLACK)
SIGNAL OUTPUT: RG-174/U (BLACK)
GUIDE MARK
6
* E10679-02 with SHV / BNC connector type (E10679-03) is also available.
DY10
DY9
DY8
DY5
DY4
DY3
DY2
DY1
R11R13
R12 R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
C3
C2
C1
P
K -HVAWG22/TFE(VIOLET)
11
12
10
1
9
2
DY6 8
DY7 3
7
4
6
5
SIGNAL OUTPUTRG-174/U (BLACK)
GNDAWG22 (BLACK)
R1 to R10R11
R12, R13C1 to C3
: 330 kΩ 5 % 1/8 W: 160 kΩ 5 % 1/8 W: 51 Ω 5 % 1/8 W: 0.01 µF, 200 V
MAXIMUM HIGH VOLTAGE = -1100 VDIVIDER CURRENT = 318 µA
‹0 E10679-02
E11807, E11807-0129
68
4.3
9.5
10.5
11
3
3
9.5
40
47
58
15
17
2- 3.2
34
6.0
1.83
2.54
12.7
4.2
3.2
2.8
0.5
10.16
5.5
11
12.4
3
710
.5
24
18
2- 2.2
13
11
3
3.4
10
72.5
26
11
.6
30
35
44
19.1
9
25
2- 3.5
25.2
19.1
27.5
2
9.5
6.5
3.9
24.5
14
14
11
30
172
19.8
56
62
35
9
(23.
6)
28.6
13
6.7360
13
2-R4
2- 3.2
3.7
9.5
3.3
10.5
(8)
18
2
18
13
2
Dimensional outlinesFor E678 series socketsE678-11N E678-12A, E678-12R* E678-12L
E678-13FE678-13E
E678-14-03E678-14C
TACCA0043EA TACCA0009EB
E678-12V
TACCA0164EC
TACCA0047EA
TACCA0005EATACCA0013EB
TACCA0184EA
E678-14W
TACCA0200EATACCA0004EA
* Gold plating type
(Unit: mm)
69
E678-15C E678-19JE678-17D
E678-19K E678-20B
E678-21C E678-32B
TACCA0201EA TACCA0046EC
60
40
40
5
12
42
6.5
12
45
50
TACCA0313EA
TACCA0203EA
TACCA0309EA
TACCA0066EC TACCA0094ED
50
60
40
4
45
25
11.5
40
5
C5.0
2.22 × 8=17.76
8.88
12
.7
22.5
6
2.22 × 9=19.98
8.88 11.1
22.9
5
26.2
(WIT
H G
AT
E)
+0
-0.3
(5.1
)3.
0 ±
0.1
5-R1.5
GATEPOSITION
R5 56
.8
19
51
54
136.
5
22.86
20.32
20.3
2
22.8
6
12.7
2.54
12.7
2.92
4.45
1.57
0.51
MATERIAL: Glass Epoxy
20
52.5
57.8
28
13
34
22
24
.0
18
.0
23
13
20
14
70
Index by type No.
Type number Product Page Product PageType number
R329-02 ................... 51 mm (2") dia. PMT ......................... 22R331-05 ................... 51 mm (2") dia. PMT ......................... 22R580 ........................ 38 mm (1-1/2") dia. PMT ................... 20R647-01 ................... 13 mm (1/2") dia. PMT ...................... 20E678 SERIES .......... Socket ........................................ 68, 69R750 ........................ 19 mm (3/4") dia. PMT ...................... 21R760 ........................ 13 mm (1/2") dia. PMT ...................... 21R762 ........................ 19 mm (3/4") dia. PMT ...................... 21E849-68 ................... Socket assembly .............................. 58E849-90 ................... Socket assembly .............................. 58E849-99 ................... Socket assembly .............................. 58R877 ........................ 127 mm (5") dia. PMT ....................... 22R877-01 ................... 127 mm (5") dia. PMT ....................... 23R877-100 ................. 127 mm (5") dia. PMT (SBA type) .... 22R960 ........................ 13 mm (1/2") dia. PMT ...................... 21E974-17 ................... Socket assembly .............................. 58E974-19 ................... Socket assembly .............................. 58E974-22 ................... Socket assembly .............................. 58E990-29 ................... Socket assembly .............................. 58R1166 ...................... 19 mm (3/4") dia. PMT ...................... 20E1198 SERIES ......... Socket assembly ........................ 58, 59R1250 ...................... 127 mm (5") dia. PMT ....................... 22R1288A-04 ............... 25 mm (1") dia. PMT ......................... 21R1288A-06 ............... 25 mm (1") dia. PMT ......................... 20R1306 ...................... 51 mm (2") dia. PMT ......................... 22R1306-15 ................. 51 mm (2") dia. PMT ......................... 23R1307 ...................... 76 mm (3") dia. PMT ......................... 22R1307-07 ................. 76 mm (3") dia. PMT ......................... 23R1450 ...................... 19 mm (3/4") dia. PMT ...................... 20R1548-07 ................. 25 mm (1" Dual) square PMT ........... 24R1635 ...................... 10 mm (3/8") dia. PMT ...................... 20E1761-21 ................. Socket assembly .............................. 58E1761-22 ................. Socket assembly .............................. 58R1828-01 ................. 51 mm (2") dia. PMT ......................... 22R1924A .................... 25 mm (1") dia. PMT ......................... 20R1924A-01 ............... 25 mm (1") dia. PMT ......................... 21H1949-50 ................. Hybrid assembly ............................... 28H1949-51 ................. Hybrid assembly ............................... 28E2037-02 ................. Socket assembly .............................. 58R2059 ...................... 51 mm (2") dia. PMT ......................... 23R2076 ...................... 19 mm (3/4") dia. PMT ...................... 21R2083 ...................... 51 mm (2") dia. PMT ......................... 22R2154-02 ................. 51 mm (2") dia. PMT ......................... 22E2183-500 ............... Socket assembly .............................. 58E2183-501 ............... Socket assembly .............................. 58R2248 ...................... 10 mm (3/8") square PMT ................. 24E2253-05 ................. Socket assembly .............................. 58R2256-02 ................. 51 mm (2") dia. PMT ......................... 23H2431-50 ................. Hybrid assembly ............................... 28R2496 ...................... 10 mm (3/8") dia. PMT ...................... 20E2624-04 ................. Socket assembly .............................. 58E2624-14 ................. Socket assembly .............................. 58E2924-500 ............... Socket assembly .............................. 58E2979-500 ............... Socket assembly .............................. 58R3149 ...................... 51 mm (2") dia. PMT ......................... 23H3164-10 ................. Hybrid assembly ............................... 28H3165-10 ................. Hybrid assembly ............................... 28H3177-50 ................. Hybrid assembly ............................... 29H3178-51 ................. Hybrid assembly ............................... 28
R3377 ...................... 51 mm (2") dia. PMT ......................... 23R3478 ...................... 19 mm (3/4") dia. PMT ...................... 20R3479 ...................... 19 mm (3/4") dia. PMT ...................... 21H3695-10 ................. Hybrid assembly ............................... 28R3878 ...................... 10 mm (3/8") dia. PMT ...................... 21R3886A .................... 38 mm (1-1/2") dia. PMT ................... 20R3991A-04 .............. 19 mm (3/4") dia. PMT ...................... 20R3998-02 ................. 28 mm (1-1/8") dia. PMT ................... 20R3998-100-02 .......... 28 mm (1-1/8") dia. PMT (SBA type) .. 20R4004 ...................... 51 mm (2") dia. PMT ......................... 23R4124 ...................... 13 mm (1/2") dia. PMT ...................... 20R4125 ...................... 19 mm (3/4") dia. PMT ...................... 20R4141 ...................... 13 mm (1/2") dia. PMT ...................... 21R4177-04 ................. 13 mm (1/2") dia. PMT ...................... 21R4177-06 ................. 13 mm (1/2") dia. PMT ...................... 20R4607A-06 ............... 51 mm (2") dia. PMT ......................... 22R4998 ...................... 25 mm (1") dia. PMT ......................... 20R5113-02 ................. 51 mm (2") dia. PMT ......................... 23R5320 ...................... 25 mm (1") dia. PMT ......................... 21R5505-70 ................. Fine mesh PMT ................................ 24R5611A .................... 19 mm (3/4") dia. PMT ...................... 21R5611A-01 ............... 19 mm (3/4") dia. PMT ...................... 20E5859 SERIES ......... Socket assembly .............................. 59R5900U-00-L16 ....... Metal package PMT ......................... 24R5900U-100-L16 ....... Metal package PMT (SBA type) ....... 24R5900U-200-L16 ....... Metal package PMT (UBA type) ....... 24R5912 ...................... 204 mm (8") dia. PMT ....................... 22R5912-20 ................. 204 mm (8") dia. PMT ....................... 22R5912-100 ............... 204 mm (8") dia. PMT (SBA type) .... 22R5924-70 ................. Fine mesh PMT ................................ 24E5996 ...................... Socket assembly .............................. 59R6041 ...................... 51 mm (2") dia. PMT ......................... 22R6041-406 ............... 51 mm (2") dia. PMT ......................... 22R6041-506 ............... 51 mm (2") dia. PMT ......................... 22R6091 ...................... 76 mm (3") dia. PMT ......................... 22E6133-04 ................. Socket assembly .............................. 58H6152-70 ................. Hybrid assembly .............................. 28R6231 ...................... 51 mm (2") dia. PMT ......................... 22R6231-01 ................. 51 mm (2") dia. PMT ......................... 23R6231-100 ............... 51 mm (2") dia. PMT (SBA type) ...... 22R6232 ...................... 60 mm (2.5") dia. PMT ...................... 22R6232-01 ................. 60 mm (2.5") dia. PMT ...................... 23R6233 ...................... 76 mm (3") dia. PMT ......................... 22R6233-01 ................. 76 mm (3") dia. PMT ......................... 23R6233-100 ............... 76 mm (3") dia. PMT (SBA type) ...... 22R6234 ...................... 60 mm (2.5") hexagon PMT .............. 24R6234-01 ................. 60 mm (2.5") hexagon PMT .............. 25R6235 ...................... 76 mm (3") hexagon PMT ................. 24R6235-01 ................. 76 mm (3") hexagon PMT ................. 25R6236 ...................... 60 mm square PMT .......................... 24R6236-01 ................. 60 mm square PMT .......................... 25R6237 ...................... 76 mm (3") square PMT .................... 24R6237-01 ................. 76 mm (3") square PMT .................... 25E6316-01 ................. Socket assembly .............................. 59H6410 ...................... Hybrid assembly .............................. 28R6427 ...................... 28 mm (1-1/8") dia. PMT ................... 20H6520 ...................... Hybrid assembly .............................. 28H6524 ...................... Hybrid assembly .............................. 28H6527 ...................... Hybrid assembly .............................. 28
71
Type number Type numberProduct Page
H6533 ...................... Hybrid assembly .............................. 28H6559 ...................... Hybrid assembly .............................. 28E6572 ...................... Socket assembly .............................. 59R6594 ...................... 127 mm (5") dia. PMT ....................... 22H6612 ...................... Hybrid assembly .............................. 28H6613 ...................... Hybrid assembly .............................. 28H6614-70 ................. Hybrid assembly .............................. 28E6736 ...................... Socket assembly .............................. 59R7056 ...................... 28 mm (1-1/8") dia. PMT ................... 21R7081 ...................... 254 mm (10") dia. PMT ..................... 22R7081-20 ................. 254 mm (10") dia. PMT ..................... 22R7081-100 ............... 254 mm (10") dia. PMT (SBA type) .... 22E7083 ...................... Socket assembly .............................. 59R7111 ...................... 28 mm (1-1/8") dia. PMT ................... 20H7195 ...................... Hybrid assembly ............................... 28H7260 ....................... Hybrid assembly ......................... 26H7260-100 ............... Hybrid assembly (SBA type) ............. 26H7260-200 ............... Hybrid assembly (UBA type) ............. 26R7373A-01 ............... 2π shape PMT .................................. 24H7415 ...................... Hybrid assembly ............................... 28R7525 ...................... 28 mm (1-1/8") dia. PMT ................... 20H7546B .................... Hybrid assembly ......................... 26H7546B-100 ............. Hybrid assembly (SBA type) ............. 26H7546B-200 ............. Hybrid assembly (UBA type) ............. 26H7546B-300 ............. Hybrid assembly (EGBA type) .......... 26R7600U ................... Metal package PMT ......................... 24R7600U-100 ............. Metal package PMT (SBA type) ........ 24R7600U-200 ............. Metal package PMT (UBA type) ........ 24R7600U-300 ............. Hybrid assembly (EGBA type) .......... 24R7600U-00-M4 ........ Metal package PMT ......................... 24R7600U-100-M4 ...... Metal package PMT (SBA type) ........ 24R7600U-200-M4 ...... Metal package PMT (UBA type) ........ 24R7600U-300-M4 ....... Hybrid assembly (EGBA type) .......... 24R7600U-03 ............... Metal package PMT ......................... 25E7693 ....................... Socket assembly .............................. 59E7694-02 .................. Socket assembly .............................. 59E7694-03 .................. Socket assembly .............................. 59R7723 ...................... 51 mm (2") dia. PMT ......................... 22R7724 ...................... 51 mm (2") dia. PMT ......................... 22R7724-100 ............... 51 mm (2") dia. PMT (SBA type) ....... 22R7725 ...................... 51 mm (2") dia. PMT ......................... 22R7761-70 ................. Fine mesh PMT ................................ 24R7899 ...................... 25 mm (1") dia. PMT ......................... 21R7899-01 ................. 25 mm (1") dia. PMT ......................... 20H8135 ...................... Hybrid assembly .............................. 28R8143 ...................... 2π shape PMT .................................. 24H8409-70 ................. Hybrid assembly .............................. 28R8520-406 ............... Metal package PMT ......................... 24R8520-506 ............... Metal package PMT ......................... 24R8619 ...................... 25 mm (1") dia. PMT ......................... 20H8643 ...................... Hybrid assembly ............................... 28H8711 ...................... Hybrid assembly ............................... 26H8711-100 ............... Hybrid assembly (SBA type) ............. 26H8711-200 ............... Hybrid assembly (UBA type) ............. 26H8711-300 ............... Hybrid assembly (EGBA type) .......... 26H8804 ...................... Hybrid assembly ............................... 26H8804-100 ............... Hybrid assembly (SBA type) ............. 26H8804-200 ............... Hybrid assembly (UBA type) ............. 26H8804-300 ............... Hybrid assembly (EGBA type) .......... 26
R8997 ...................... 38 mm (1-1/2") dia. PMT ................... 24R9420 ...................... 38 mm (1-1/2") dia. PMT ................... 20R9420-100 ............... 38 mm (1-1/2") dia. PMT (SBA type) ... 20R9800 ...................... 25 mm (1") dia. PMT ......................... 20R9800-100 ............... 25 mm (1") dia. PMT (SBA type) ...... 20R9800U-110 ............. Metal package PMT (SBA type) ....... 24R9800U-210 ............. Metal package PMT (UBA type) ....... 24R10233 .................... 90 mm (3.5") dia. PMT ...................... 22R10233-01 ............... 90 mm (3.5") dia. PMT ...................... 23R10233-100 ............. 90 mm (3.5") dia. PMT (SBA type) ... 22H10515B-100 ........... Hybrid assembly (SBA type) ............. 26H10515B-200 ........... Hybrid assembly (UBA type) ............. 26R10550 .................... 38 mm (1-1/2" quadrant) square PMT .... 24H10580 ..................... Hybrid assembly ............................... 28E10679-02 ................ Socket assembly .............................. 59R10806 .................... 102 mm (4") dia. PMT ....................... 22R10806-100 ............. 102 mm (4") dia. PMT (SBA type) .... 22R11065 .................... 76 mm (3") dia. PMT ......................... 22R11102 .................... 38 mm (1-1/2") dia. PMT ................... 20R11265U-100 ........... Metal package PMT (SBA type) ....... 24R11265U-200 ........... Metal package PMT (UBA type) ....... 24R11265U-300 ........... Metal package PMT (EGBA type) .... 24R11410 .................... 76 mm (3") dia. PMT ......................... 22E11807 .................... Socket assembly .............................. 59E11807-01 ............... Socket assembly .............................. 59R11833-03 ............... 127 mm (5") dia. PMT ..................... 22R11833-100-03 ........ 127 mm (5") dia. PMT (SBA type) .... 22H11934-100 ............. Hybrid assembly (SBA type) ............. 26H11934-200 ............. Hybrid assembly (UBA type) ............. 26H11934-300 ............. Hybrid assembly (EGBA type) .......... 26R12199 .................... 80 mm dia. PMT ............................... 22R12421 .................... 13 mm (1/2") dia. PMT ..................... 20R12421-03 ............... 13 mm (1/2") dia. PMT ..................... 21R12421-300 ............. 13 mm (1/2") dia. PMT (EGBA type) ... 20H12428-100 ............. Hybrid assembly (SBA type) ............. 26H12428-200 ............. Hybrid assembly (UBA type) ............. 26H12445-100 ............. Hybrid assembly (SBA type) ............. 26H12445-200 ............. Hybrid assembly (UBA type) ............. 26H12690 ..................... 13 mm (1/2") dia. PMT assembly ..... 28H12690-300 ............. 13 mm (1/2") dia. PMT assembly (EGBA type) ... 28H12700A .................. Hybrid assembly ............................... 26H12700A-10 ............. Hybrid assembly ............................... 26H12700A-03 ............. Hybrid assembly ............................... 27H12700B .................. Hybrid assembly ............................... 26H12700B-10 ............. Hybrid assembly ............................... 26R12860 .................... 508 mm (20") dia. PMT ..................... 22R13089 .................... 51 mm (2") dia. PMT ........................ 22H13226A-100 ........... Hybrid assembly (SBA type) ............. 26H13226A-200 ........... Hybrid assembly (UBA type) ............. 26R13408 .................... 38 mm (1-1/2") dia. PMT .................. 20E13416 .................... Socket assembly ............................... 59R13435 .................... 51 mm (2") dia. PMT ........................ 22R13449 .................... 28 mm (1-1/8") dia. PMT .................. 20R13478 .................... 25 mm (1") dia. PMT ........................ 20H13700 .................... Hybrid assembly ............................... 26H13700A-03 ............. Hybrid assembly ............................... 27H13974-00-1616 ...... Hybrid assembly ............................... 26H13974-03-1616 ...... Hybrid assembly ............................... 27
Product Page
72
CAUTIONS AND WARRANTY
WARNING
PRECAUTIONS FOR USE
WARRANTY
Take sufficient care to avoid an electric shock hazardA high voltage used in photomultiplier tube opera-tion may present a shock hazard. Photomultiplier tubes should be installed and handled only by qualified personnel that have been instructed in handling of high voltages. Designs of equipment utilizing these devices should incorporate appropri-
ate interlocks to protect the operator and service personnel.The metal housing of the Metal Package PMT R8520-406 and R8520-506 and R11065 series and R11410 series are connected to the photocathode (potential) so that it becomes a high voltage potential when the product is operated at a negative high voltage (anode grounded).
HIGHVOLTAGE
● Handle tubes with extreme carePhotomultiplier tubes have evacuated glass envelopes. Allowing the glass to be scratched or to be subjected to shock can cause cracks. Extreme care should be taken in handling, especially for tubes with graded sealing of synthetic silica.
● Keep faceplate and base cleanDo not touch the faceplate and base with bare hands. Dirt and fingerprints on the faceplate cause loss of transmittance and dirt the base may cause ohmic leakage. Should they become soiled, wipe it clean using alcohol.
● Do not expose to strong lightDirect sunlight and other strong illumination may cause damage the Photocathode. They must not be allowed to strike the photocathode, even when the tube is not operated.
● Handling of tubes with a glass baseA glass base (also called button stem) is less rugged than a plastic base, so care should be taken in handling this type of
tube. For example, when fabricating the voltage-divider circuit, solder the divider resistors to socket lugs while the tube is inserted in the socket.
● Cooling of tubesWhen cooling a photomultiplier tube, the photocathode section is usually cooled. However, if you suppose that the base is also cooled down to -30 °C or below, please consult our sales office in advance.
● Helium permeationhelium will permeate through the glass bulb, leading to an increase in noise. avoid operating or storing tubes in an environment where helium is present. Helium permeation through silica glass is especially large.
Data and specifications listed in this catalog are subject to change due to product improvement and other factors. before specifying any of the types in your production equipment, please consult our sales office.
Hamamatsu photomultiplier tubes and related products are warranted to the original purchaser for a period of 12 months after delivery. The warranty is limited to repair or replacement of a defective product due to defects in workmanship or mate-rials used in its manufacture.However, even if within the warranty period the warranty shall
not apply to failures or damages caused by misoperation, mishandling, modification or accidents such as natural or man-made disasters.The customer should inspect and test all products as soon as they are delivered.
73
Typical photocathode spectral response and emission spectrum of scintillators
TPMHB0342EE
A: Bialkali photocathode (Borosilicate glass)B: Bialkali photocathode (UV glass)C: Bialkali photocathode (Silica glass)D: Bialkali photocathodeE: High temp. bialkali photocathodeF: Super bialkaliG: Ultra bialkaliH: Extended green bialkaliI: Low temp. (down to -110 °C) bialkali photocathodeJ: Low temp. (down to -186 °C) bialkali photocathode
0
100
WAVELENGTH (nm)
QU
AN
TU
M E
FF
ICIE
NC
Y (
%)
8060
40
20
100.1R
ELA
TIV
E IN
TE
NS
ITY
(%
)
100
10
1
700100 200 300 400 500 600
BaF2
LaBr3
Nal (Tl)
LSOCsI (Tl)
BGO
D
G
H
A
B
C
I F
J E
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Electron Tube Division314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, JapanTelephone: (81)539/62-5248, Fax: (81)539/62-2205
Main ProductsElectron TubesPhotomultiplier TubesPhotomultiplier Tube ModulesMicrochannel PlatesImage IntensifiersXenon Lamps / Mercury Xenon LampsDeuterium LampsLight Source Applied ProductsLaser Applied ProductsMicrofocus X-ray SourcesX-ray Imaging Devices
Opto-semiconductorsSi photodiodesAPDPhoto ICImage sensorsPSDInfrared detectorsLEDOptical communication devicesAutomotive devicesX-ray flat panel sensorsMini-spectrometersOpto-semiconductor modules
Imaging and Processing SystemsCameras / Image Processing Measuring SystemsX-ray ProductsLife Science SystemsMedical SystemsSemiconductor Failure Analysis SystemsFPD / LED Characteristic Evaluation SystemsSpectroscopic and Optical Measurement Systems
Laser ProductsSemiconductor lasersApplied products of semiconductor lasersSolid state lasers
Sales Offices
Information in this catalog is
believed to be reliable. However,
no responsibility is assumed for
possible inaccuracies or omission.
Specifications are subject to
change without notice. No patent
rights are granted to any of the
circuits described herein.
© 2017 Hamamatsu Photonics K.K.
Quality, technology and service are part of every product.
REVISED APR. 2017
Swiss OfficeDornacherplatz 7 4500 Solothurn, SwitzerlandTelephone: (41)32-625-60-60, Fax: (41)32-625-60-61E-mail: [email protected]
Belgian OfficeAxisparc Technology, rue Andre Dumont 7 1435Mont-Saint-Guibert, BelgiumTelephone: (32)10 45 63 34, Fax: (32)10 45 63 67E-mail: [email protected]
Spanish OfficeC. Argenters, 4 edif 2 Parque Tecnológico del Vallés08290 Cerdanyola (Barcelona), SpainTelephone: (34)93 582 44 30, Fax: (34)93 582 44 31E-mail: [email protected]
Germany, Denmark, The Netherlands, Poland:HAMAMATSU PHOTONICS DEUTSCHLAND GmbHMain OfficeArzbergerstr. 10, D-82211 Herrsching am Ammersee, GermanyTelephone: (49)8152-375-0, Fax: (49)8152-265-8E-mail: [email protected]
Danish OfficeLautruphøj 1-3, DK-2750 Ballerup, DenmarkTelephone: (45)70-20-93-69, Fax: (45)44-20-99-10Email: [email protected]
Netherlands OfficeTelevisieweg 2, NL-1322 AC Almere, The NetherlandsTelephone: (31)36-5405384, Fax: (31)36-5244948E-mail: [email protected]
Poland Office02-525 Warsaw, 8 St. A. Boboli Str., PolandTelephone: (48)22-646-0016, Fax: (48)22-646-0018E-mail: [email protected]
North Europe and CIS:HAMAMATSU PHOTONICS NORDEN ABMain OfficeTorshamnsgatan 35 16440 Kista, SwedenTelephone: (46)8-509 031 00, Fax: (46)8-509 031 01E-mail: [email protected]
Russian Office11, Christoprudny Boulevard, Building 1, Office 114,101000, Moscow, RussiaTelephone: (7)495 258 85 18, Fax: (7)495 258 85 19E-mail: [email protected]
Italy:HAMAMATSU PHOTONICS ITALIA S.r.l.Main OfficeStrada della Moia, 1 int. 6, 20020 Arese (Milano), ItalyTelephone: (39)02-935-81-733, Fax: (39)02-935-81-741E-mail: [email protected]
Rome OfficeViale Cesare Pavese, 435, 00144 Roma, ItalyTelephone: (39)06-50513454, Fax: (39)02-935-81-741E-mail: [email protected]
Japan:HAMAMATSU PHOTONICS K.K.325-6, Sunayama-cho, Naka-ku,Hamamatsu City, Shizuoka Pref. 430-8587, JapanTelephone: (81)53-452-2141, Fax: (81)53-456-7889E-mail: [email protected]
China:HAMAMATSU PHOTONICS (CHINA) Co., Ltd.Main Office1201 Tower B, Jiaming Center, 27 Dongsanhuan Beilu, Chaoyang District, 100020 Beijing, ChinaTelephone: (86)10-6586-6006, Fax: (86)10-6586-2866E-mail: [email protected]
Shanghai Branch4905 Wheelock Square, 1717 Nanjing Road West, Jingan District, 200040 Shanghai, ChinaTelephone: (86)21-6089-7018, Fax: (86)21-6089-7017
Taiwan:HAMAMATSU PHOTONICS TAIWAN Co., Ltd.Main Office8F-3, No.158, Section2, Gongdao 5th Road, East District, Hsinchu, 300, Taiwan R.O.C.Telephone: (886)03-659-0080, Fax: (886)07-811-7238E-mail: [email protected]
Kaohsiung OfficeNo.6, Central 6th Road, K.E.P.Z. Kaohsiung 806, Taiwan R.O.C.Telephone: (886)07-262-0736, Fax: (886)07-811-7238
U.S.A.:HAMAMATSU CORPORATIONMain Office360 Foothill Road, Bridgewater, NJ 08807, U.S.A.Telephone: (1)908-231-0960, Fax: (1)908-231-1218E-mail: [email protected]
California Office2875 Moorpark Ave. San Jose, CA 95128, U.S.A.Telephone: (1)408-261-2022, Fax: (1)408-261-2522E-mail: [email protected]
Chicago Office4711 Golf Road, Suite 805, Skokie, IL 60076, U.S.A.Telephone: (1)847-825-6046, Fax: (1)847-825-2189E-mail: [email protected]
Boston Office20 Park Plaza, Suite 312, Boston, MA 02116, U.S.A.Telephone: (1)617-536-9900, Fax: (1)617-536-9901E-mail: [email protected]
United Kingdom:HAMAMATSU PHOTONICS UK LimitedMain Office2 Howard Court, 10 Tewin Road, Welwyn Garden City,Hertfordshire AL7 1BW, UKTelephone: (44)1707-294888, Fax: (44)1707-325777E-mail: [email protected]
South Africa Office:9 Beukes Avenue, Highway Gardens, Edenvale, 1609, South AfricaTelephone/Fax: (27)11-609-0367
France, Portugal, Belgium, Switzerland, Spain:HAMAMATSU PHOTONICS FRANCE S.A.R.L.Main Office19, Rue du Saule Trapu Parc du Moulin de Massy,91882 Massy Cedex, FranceTelephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10E-mail: [email protected]
TPMZ0003E01APR. 2017 IP(2000)