Photovoltaic modules HIT®+ (N340) HIT® (N335/N330/N325)
Panasonic’s unique heterojunction technology uses ultra-thin amorphous silicon layers. These thin dual layers reduce losses, resulting in higher energy output than conventional panels.
Our powerful Panasonic HIT®+ N340 features a high module efficiency of 20.4%, an industry leading temperature coefficient of -0.258% /⁰C and a sleek design. Powerful and efficient, designed to get the most out of your roof!
n-type crystalline silicon waferDouble-sided textured surface
i-type amorphous layer
Amorphous layer
Transparent electrode (TCO)
Lattice-type electrodes
Finger
Tab
These amorphous silicon layersreduce the recombination ofelectrons to minimum level.
Electrodes
Ultra-thin amorphous silicon layer
HIT® is a registered trademark of Panasonic Group
Quality and reliabilityPanasonic’s vertical integration, over 20 years of experience manufacturing HIT®, 20 internal tests and 3-times beyond those mandated by current standards provide extreme quality assurance.
Higher efficiency of 20.4% through improved cells Enables higher power output and greater energy yields. The HIT+ cells boast an even cleaner junction between the layers of the cells and provides maxi-mum production for your limited roof space.
Unique water drainageThe water drainage system gives rain, water and snow melt a place to go, reducing water stains and soiling on the panel. Less dirt on the panel means more sunlight getting through to generate power.Enhanced Frame Design: A 40mm frame increas-es durability and strength, being able to handle loads of up to 5400Pa.
Low degradationHIT “N-type” cells result in extremely Low Light Induced Degradation (LID) and zero Potential Induced Degradation (PID) which supports reliability and longevity. This technology reduces annual degradation, guaranteeing more power for the long haul.
Our competitive advantagesHigh performance at high temperatures As temperature increases, HIT® continues to perform at high levels due to the industry leading temperature coefficient of -0.258% /⁰C. No other module even comes close to our temperature characteristics. That means more energy throughout the day and particularly in summer.
25 year product and performance guarantee**Industry leading 25 year product workmanship and performance guarantee is backed by a century old company - Panasonic. Power output is guaranteed to 86.2% after 25 years.
I
DEPENDENCE ON IRRADIANCE
A
V
W ㎡
W ㎡
W ㎡
㎡
㎡
Reference data for model:VBHN340SJ53(Cell temperature: 25°C)
LINEAR PERFORMANCE GUARANTEE
98969492908886848280
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 year
86.2%
97%
% / year
ELECTRICAL SPECIFICATIONS
Model VBHN340SJ53 VBHN335SJ53 VBHN330SJ53 VBHN325SJ53
Maximum Power (Pmax)¹ 340 W 335 W 330 W 325 W
Maximum Power Voltage (Vpm) 59.7 V 59.4 V 58.0 V 57.6 V
Maximum Power Current (lpm) 5.70 A 5.65 A 5.70 A 5.65 A
Open Circuit Voltage (Voc) 71.3 V 71.0 V 69.7 V 69,6 V
Short Circuit Current (lsc) 6.13 A 6.08 A 6.07 A 6,03 A
Module Efficiency 20.4% 20.0 % 19.7 % 19.4 %
Temperature Coefficient (Pmax) -0.258 %/°C
Temperature Coefficient (Voc) -0.235 %/°C
Temperature Coefficient (lsc) 0.055 %/°C
NOCT 44.0°C
Maximum System Voltage 1000 V
Series Fuse Rating 15 A
Power Tolerance (-/+) +10%/ 0%*
MECHANICAL SPECIFICATIONS
Model VBHN340SJ53, VBHN335SJ53, VBHN330SJ53, VBHN325SJ53
Internal Bypass Diodes 4 Bypass Diodes
Module Area 1.67 m²
Weight 19 kg
Dimensions LxWxH 1590 mm x 1053 mm x 40 mm
Cable Length +Male/-Female 1020 mm/1020 mm
Cable Size / Type No. 12 AWG / PV Cable
Connector Type SMK
Static Wind / Snow Load 5400 Pa (Positive/Negative)
Pallet Dimensions LxWxH 1618 mm x 1071 mm x 2356 mm (double stack)
Quantity per Pallet / Pallet Weight 48 pcs. (2x24 pcs.) (960 kg)
Quantity per 40' Container 672 pcs.
OPERATING CONDITIONS & SAFETY RATINGS
Model VBHN340SJ53, VBHN335SJ53, VBHN330SJ53, VBHN325SJ53
Operating Temperature -40°C to 85°C
Safety & Rating Certifications IEC61215, IEC61730-1, IEC1730-2
Fire Classification Class I
Limited Guarantee 25** years workmanship and power output (linear)***
NOTE: Standard Test Conditions: Air mass 1.5; irradiance = 1000W/m²; cell temp. 25°C* Maximum power at delivery. For guarantee conditions, please check our guarantee document.
** Registration necessary on www.eu-solar.panasonic.net, otherwise 15 years apply based on guarantee document).
*** 1st year 97 %, from 2nd year -0.45 %/year, in 25th year 86.2%. 1 STC: Cell temp. 25°C, AM1.5, 1000W/m²
NOTE: Specifications and information above may change without notice.
CAUTION! Please read the installation manual carefully before using the products.Used electrical and electronic products must not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points in accordance with your national legislation.
DIMENSIONS
Unit: mm
Photovoltaic modules HIT®+ (N340) HIT® (N335/N330/N325)
Panasonic Life Solutions Europe, Panasonic Electric Works Europe AG
Caroline-Herschel-Strasse 100, 85521 Ottobrunn, Germany
Tel. +49 89 45354-1000, Fax +49 89 45354-2111
[email protected] www.eu-solar.panasonic.net 03/2
020
Electrical Protectio nClass l l
CLASS IUNI 8457UNI 9174UNI 9177
CERTIFICATES
All rights reserved. © 2020 Copyright Panasonic Electric Works Europe AG
I