Date post: | 12-Nov-2014 |
Category: |
Documents |
Upload: | josoborned |
View: | 9,024 times |
Download: | 5 times |
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
• To View the presentation as a slideshow with effects select “View” on the menu bar and click on “Slide Show.”
• To advance through the presentation, click the right-arrow key or the space bar.
• From the resources slide, click on any resource to see a presentation for that resource.
• From the Chapter menu screen click on any lesson to go directly to that lesson’s presentation.
• You may exit the slide show at any time by pressing the Esc key.
How to Use This Presentation
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter Presentation
Transparencies Sample Problems
Visual Concepts
Standardized Test Prep
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Vibrations and WavesChapter 11
Table of Contents
Section 1 Simple Harmonic Motion
Section 2 Measuring Simple Harmonic Motion
Section 3 Properties of Waves
Section 4 Wave Interactions
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Section 1 Simple Harmonic MotionChapter 11
Objectives
• Identify the conditions of simple harmonic motion.
• Explain how force, velocity, and acceleration change as an object vibrates with simple harmonic motion.
• Calculate the spring force using Hooke’s law.
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Hooke’s Law
• One type of periodic motion is the motion of a mass attached to a spring.
• The direction of the force acting on the mass (Felastic) is always opposite the direction of the mass’s displacement from equilibrium (x = 0).
Section 1 Simple Harmonic Motion
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Hooke’s Law, continued
At equilibrium:• The spring force and the mass’s acceleration
become zero.• The speed reaches a maximum.
At maximum displacement:• The spring force and the mass’s acceleration reach
a maximum.• The speed becomes zero.
Section 1 Simple Harmonic Motion
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Hooke’s Law, continued
• Measurements show that the spring force, or restoring force, is directly proportional to the displacement of the mass.
• This relationship is known as Hooke’s Law:
Felastic = –kx
spring force = –(spring constant displacement)
• The quantity k is a positive constant called the spring constant.
Section 1 Simple Harmonic Motion
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Spring Constant
Section 1 Simple Harmonic Motion
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Sample Problem
Hooke’s Law
If a mass of 0.55 kg attached to a vertical spring stretches the spring 2.0 cm from its original equilibrium position, what is the spring constant?
Section 1 Simple Harmonic Motion
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Sample Problem, continued
Section 1 Simple Harmonic Motion
Unknown: k = ?
1. DefineGiven: m = 0.55 kg x = –2.0 cm = –0.20 m g = 9.81 m/s2
Diagram:
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Sample Problem, continued
Section 1 Simple Harmonic Motion
2. PlanChoose an equation or situation: When the mass is attached to the spring,the equilibrium position changes. At the new equilibrium position, the net force acting on the mass is zero. So the spring force (given by Hooke’s law) must be equal and opposite to the weight of the mass.
Fnet = 0 = Felastic + Fg
Felastic = –kx
Fg = –mg
–kx – mg = 0
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Sample Problem, continued
Section 1 Simple Harmonic Motion
2. Plan, continued Rearrange the equation to isolate the unknown:
kx mg 0
kx mg
k mg
x
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Sample Problem, continued
Section 1 Simple Harmonic Motion
3. Calculate Substitute the values into the equation and
solve:
k mg
x
(0.55 kg)(9.81 m/s2 )
–0.020 m
k 270 N/m
4. Evaluate The value of k implies that 270 N of force is
required to displace the spring 1 m.
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Simple Harmonic Motion
• The motion of a vibrating mass-spring system is an example of simple harmonic motion.
• Simple harmonic motion describes any periodic motion that is the result of a restoring force that is proportional to displacement.
• Because simple harmonic motion involves a restoring force, every simple harmonic motion is a back-and-forth motion over the same path.
Section 1 Simple Harmonic Motion
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Simple Harmonic Motion
Section 1 Simple Harmonic Motion
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Force and Energy in Simple Harmonic Motion
Section 1 Simple Harmonic Motion
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
The Simple Pendulum
• A simple pendulum consists of a mass called a bob, which is attached to a fixed string.
Section 1 Simple Harmonic Motion
The forces acting on the bob at any point are the force exerted by the string and the gravitational force.
• At any displacement from equilibrium, the weight of the bob (Fg) can be resolved into two components.
• The x component (Fg,x = Fg sin ) is the only force acting on the bob in the direction of its motion and thus is the restoring force.
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
The Simple Pendulum, continued
• The magnitude of the restoring force (Fg,x = Fg sin ) is proportional to sin .
• When the maximum angle of displacement is relatively small (<15°), sin is approximately equal to in radians.
Section 1 Simple Harmonic Motion
• As a result, the restoring force is very nearly proportional to the displacement.
• Thus, the pendulum’s motion is an excellent approximation of simple harmonic motion.
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Restoring Force and Simple Pendulums
Section 1 Simple Harmonic Motion
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Simple Harmonic Motion
Section 1 Simple Harmonic Motion
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Objectives
• Identify the amplitude of vibration.
• Recognize the relationship between period and frequency.
• Calculate the period and frequency of an object vibrating with simple harmonic motion.
Section 2 Measuring Simple Harmonic Motion
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Amplitude, Period, and Frequency in SHM
• In SHM, the maximum displacement from equilibrium is defined as the amplitude of the vibration.
– A pendulum’s amplitude can be measured by the angle between the pendulum’s equilibrium position and its maximum displacement.
– For a mass-spring system, the amplitude is the maximum amount the spring is stretched or compressed from its equilibrium position.
• The SI units of amplitude are the radian (rad) and the meter (m).
Section 2 Measuring Simple Harmonic Motion
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Amplitude, Period, and Frequency in SHM
• The period (T) is the time that it takes a complete cycle to occur.
– The SI unit of period is seconds (s).
• The frequency (f) is the number of cycles or vibrations per unit of time.
– The SI unit of frequency is hertz (Hz).
– Hz = s–1
Section 2 Measuring Simple Harmonic Motion
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Amplitude, Period, and Frequency in SHM, continued• Period and frequency are inversely related:
Section 2 Measuring Simple Harmonic Motion
f 1
T or T
1
f
• Thus, any time you have a value for period or frequency, you can calculate the other value.
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Measures of Simple Harmonic Motion
Section 2 Measuring Simple Harmonic Motion
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Measures of Simple Harmonic Motion
Section 2 Measuring Simple Harmonic Motion
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Period of a Simple Pendulum in SHM
• The period of a simple pendulum depends on the length and on the free-fall acceleration.
Section 2 Measuring Simple Harmonic Motion
T 2L
ag
• The period does not depend on the mass of the bob or on the amplitude (for small angles).
period 2length
free-fall acceleration
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Period of a Mass-Spring System in SHM
• The period of an ideal mass-spring system depends on the mass and on the spring constant.
Section 2 Measuring Simple Harmonic Motion
T 2m
k
• The period does not depend on the amplitude.• This equation applies only for systems in which the
spring obeys Hooke’s law.
period 2mass
spring constant
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Objectives
• Distinguish local particle vibrations from overall wave motion.
• Differentiate between pulse waves and periodic waves.
• Interpret waveforms of transverse and longitudinal waves.
• Apply the relationship among wave speed, frequency, and wavelength to solve problems.
• Relate energy and amplitude.
Section 3 Properties of Waves
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Wave Motion
• A wave is the motion of a disturbance.
• A medium is a physical environment through which a disturbance can travel. For example, water is the medium for ripple waves in a pond.
• Waves that require a medium through which to travel are called mechanical waves. Water waves and sound waves are mechanical waves.
• Electromagnetic waves such as visible light do not require a medium.
Section 3 Properties of Waves
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Wave Types
• A wave that consists of a single traveling pulse is called a pulse wave.
• Whenever the source of a wave’s motion is a periodic motion, such as the motion of your hand moving up and down repeatedly, a periodic wave is produced.
• A wave whose source vibrates with simple harmonic motion is called a sine wave. Thus, a sine wave is a special case of a periodic wave in which the periodic motion is simple harmonic.
Section 3 Properties of Waves
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Relationship Between SHM and Wave Motion
Section 3 Properties of Waves
As the sine wave created by this vibrating blade travels to the right, a single point on the string vibrates up and down with simple harmonic motion.
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Wave Types, continued
• A transverse wave is a wave whose particles vibrate perpendicularly to the direction of the wave motion.
• The crest is the highest point above the equilibrium position, and the trough is the lowest point below the equilibrium position.
• The wavelength () is the distance between two adjacent similar points of a wave.
Section 3 Properties of Waves
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Transverse Waves
Section 3 Properties of Waves
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Wave Types, continued
• A longitudinal wave is a wave whose particles vibrate parallel to the direction the wave is traveling.
• A longitudinal wave on a spring at some instant t can be represented by a graph. The crests correspond to compressed regions, and the troughs correspond to stretched regions.
• The crests are regions of high density and pressure (relative to the equilibrium density or pressure of the medium), and the troughs are regions of low density and pressure.
Section 3 Properties of Waves
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Longitudinal Waves
Section 3 Properties of Waves
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Period, Frequency, and Wave Speed
• The frequency of a wave describes the number of waves that pass a given point in a unit of time.
• The period of a wave describes the time it takes for a complete wavelength to pass a given point.
• The relationship between period and frequency in SHM holds true for waves as well; the period of a wave is inversely related to its frequency.
Section 3 Properties of Waves
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Characteristics of a Wave
Section 3 Properties of Waves
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Period, Frequency, and Wave Speed, continued
• The speed of a mechanical wave is constant for any given medium.
• The speed of a wave is given by the following equation:
v = fwave speed = frequency wavelength
• This equation applies to both mechanical and electromagnetic waves.
Section 3 Properties of Waves
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Waves and Energy Transfer
• Waves transfer energy by the vibration of matter.• Waves are often able to transport energy efficiently.• The rate at which a wave transfers energy depends
on the amplitude. – The greater the amplitude, the more energy a
wave carries in a given time interval. – For a mechanical wave, the energy transferred is
proportional to the square of the wave’s amplitude.• The amplitude of a wave gradually diminishes over
time as its energy is dissipated.
Section 3 Properties of Waves
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Objectives
• Apply the superposition principle.
• Differentiate between constructive and destructive interference.
• Predict when a reflected wave will be inverted.
• Predict whether specific traveling waves will produce a standing wave.
• Identify nodes and antinodes of a standing wave.
Section 4 Wave Interactions
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Wave Interference
• Two different material objects can never occupy the same space at the same time.
• Because mechanical waves are not matter but rather are displacements of matter, two waves can occupy the same space at the same time.
• The combination of two overlapping waves is called superposition.
Section 4 Wave Interactions
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Wave Interference, continued
In constructive interference, individual displacements on the same side of the equilibrium position are added together to form the resultant wave.
Section 4 Wave Interactions
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Wave Interference, continued
In destructive interference, individual displacements on opposite sides of the equilibrium position are added together to form the resultant wave.
Section 4 Wave Interactions
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Comparing Constructive and Destructive Interference
Section 4 Wave Interactions
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Reflection
• What happens to the motion of a wave when it reaches a boundary?
• At a free boundary, waves are reflected.
• At a fixed boundary, waves are reflected and inverted.
Section 4 Wave Interactions
Free boundary Fixed boundary
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Standing Waves
Section 4 Wave Interactions
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Standing Waves
Section 4 Wave Interactions
• A standing wave is a wave pattern that results when two waves of the same frequency, wavelength, and amplitude travel in opposite directions and interfere.
• Standing waves have nodes and antinodes.– A node is a point in a standing wave that
maintains zero displacement.– An antinode is a point in a standing wave, halfway
between two nodes, at which the largest displacement occurs.
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Standing Waves, continued
Section 4 Wave Interactions
• Only certain wavelengths produce standing wave patterns.
• The ends of the string must be nodes because these points cannot vibrate.
• A standing wave can be produced for any wavelength that allows both ends to be nodes.
• In the diagram, possible wavelengths include 2L (b), L (c), and 2/3L (d).
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Standing Waves
Section 4 Wave Interactions
This photograph shows four possible standing waves that can exist on a given string. The diagram shows the progressionof the second standing wave for one-half of a cycle.
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice
Base your answers to questions 1–6 on the information below.
Standardized Test PrepChapter 11
A mass is attached to a spring and moves with simple harmonic motion on a frictionless horizontal surface.
1. In what direction does the restoring force act?
A. to the leftB. to the rightC. to the left or to the right depending on whether the
spring is stretched or compressedD. perpendicular to the motion of the mass
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice
Base your answers to questions 1–6 on the information below.
Standardized Test PrepChapter 11
A mass is attached to a spring and moves with simple harmonic motion on a frictionless horizontal surface.
1. In what direction does the restoring force act?
A. to the leftB. to the rightC. to the left or to the right depending on whether the
spring is stretched or compressedD. perpendicular to the motion of the mass
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 1–6 on the information below.
Standardized Test PrepChapter 11
A mass is attached to a spring and moves with simple harmonic motion on a frictionless horizontal surface.
2. If the mass is displaced –0.35 m from its equilibrium position, the restoring force is 7.0 N. What is the spring constant?
F. –5.0 10–2 N/m H. 5.0 10–2 N/mG. –2.0 101 N/m J. 2.0 101 N/m
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 1–6 on the information below.
Standardized Test PrepChapter 11
A mass is attached to a spring and moves with simple harmonic motion on a frictionless horizontal surface.
2. If the mass is displaced –0.35 m from its equilibrium position, the restoring force is 7.0 N. What is the spring constant?
F. –5.0 10–2 N/m H. 5.0 10–2 N/mG. –2.0 101 N/m J. 2.0 101 N/m
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 1–6 on the information below.
Standardized Test PrepChapter 11
A mass is attached to a spring and moves with simple harmonic motion on a frictionless horizontal surface.
3. In what form is the energy in the system when the mass passes through the equilibrium point?
A. elastic potential energyB. gravitational potential energyC. kinetic energyD. a combination of two or more of the above
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 1–6 on the information below.
Standardized Test PrepChapter 11
A mass is attached to a spring and moves with simple harmonic motion on a frictionless horizontal surface.
3. In what form is the energy in the system when the mass passes through the equilibrium point?
A. elastic potential energyB. gravitational potential energyC. kinetic energyD. a combination of two or more of the above
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 1–6 on the information below.
Standardized Test PrepChapter 11
A mass is attached to a spring and moves with simple harmonic motion on a frictionless horizontal surface.
4. In what form is the energy in the system when the mass is at maximum displacement?
F. elastic potential energyG. gravitational potential energyH. kinetic energyJ. a combination of two or more of the above
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 1–6 on the information below.
Standardized Test PrepChapter 11
A mass is attached to a spring and moves with simple harmonic motion on a frictionless horizontal surface.
4. In what form is the energy in the system when the mass is at maximum displacement?
F. elastic potential energyG. gravitational potential energyH. kinetic energyJ. a combination of two or more of the above
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 1–6 on the information below.
Standardized Test PrepChapter 11
A mass is attached to a spring and moves with simple harmonic motion on a frictionless horizontal surface.
5. Which of the following does not affect the period of the mass-spring system?
A. mass B. spring constant C. amplitude of vibrationD. All of the above affect the period.
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 1–6 on the information below.
Standardized Test PrepChapter 11
A mass is attached to a spring and moves with simple harmonic motion on a frictionless horizontal surface.
5. Which of the following does not affect the period of the mass-spring system?
A. mass B. spring constant C. amplitude of vibrationD. All of the above affect the period.
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 1–6 on the information below.
Standardized Test PrepChapter 11
A mass is attached to a spring and moves with simple harmonic motion on a frictionless horizontal surface.
6. If the mass is 48 kg and the spring constant is 12 N/m, what is the period of the oscillation?
F. 8 s H. s G. 4 s J. s
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 1–6 on the information below.
Standardized Test PrepChapter 11
A mass is attached to a spring and moves with simple harmonic motion on a frictionless horizontal surface.
6. If the mass is 48 kg and the spring constant is 12 N/m, what is the period of the oscillation?
F. 8 s H. s G. 4 s J. s
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 7–10 on the information below.
Standardized Test PrepChapter 11
A pendulum bob hangs from a string and moves with simple harmonic motion.
7. What is the restoring force in the pendulum?
A. the total weight of the bob B. the component of the bob’s weight tangent to the
motion of the bobC. the component of the bob’s weight perpendicular to the motion of the bobD. the elastic force of the stretched string
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 7–10 on the information below.
Standardized Test PrepChapter 11
A pendulum bob hangs from a string and moves with simple harmonic motion.
7. What is the restoring force in the pendulum?
A. the total weight of the bob B. the component of the bob’s weight tangent to the
motion of the bobC. the component of the bob’s weight perpendicular to the
motion of the bobD. the elastic force of the stretched string
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 7–10 on the information below.
Standardized Test PrepChapter 11
A pendulum bob hangs from a string and moves with simple harmonic motion.
8. Which of the following does not affect the period of the pendulum?
F. the length of the string G. the mass of the pendulum bobH. the free-fall acceleration at the pendulum’s locationJ. All of the above affect the period.
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 7–10 on the information below.
Standardized Test PrepChapter 11
A pendulum bob hangs from a string and moves with simple harmonic motion.
8. Which of the following does not affect the period of the pendulum?
F. the length of the string G. the mass of the pendulum bobH. the free-fall acceleration at the pendulum’s locationJ. All of the above affect the period.
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 7–10 on the information below.
Standardized Test PrepChapter 11
A pendulum bob hangs from a string and moves with simple harmonic motion.
9. If the pendulum completes exactly 12cycles in 2.0 min, what is the frequency ofthe pendulum?
A. 0.10 Hz B. 0.17 Hz C. 6.0 Hz D. 10 Hz
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 7–10 on the information below.
Standardized Test PrepChapter 11
A pendulum bob hangs from a string and moves with simple harmonic motion.
9. If the pendulum completes exactly 12cycles in 2.0 min, what is the frequency ofthe pendulum?
A. 0.10 Hz B. 0.17 Hz C. 6.0 Hz D. 10 Hz
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 7–10 on the information below.
Standardized Test PrepChapter 11
A pendulum bob hangs from a string and moves with simple harmonic motion.
10. If the pendulum’s length is 2.00 m and ag = 9.80 m/s2, how many complete oscillations does the pendulum make in 5.00 min?
F. 1.76 H. 106G. 21.6 J. 239
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 7–10 on the information below.
Standardized Test PrepChapter 11
A pendulum bob hangs from a string and moves with simple harmonic motion.
10. If the pendulum’s length is 2.00 m and ag = 9.80 m/s2, how many complete oscillations does the pendulum make in 5.00 min?
F. 1.76 H. 106G. 21.6 J. 239
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 11–13 on the graph.
Standardized Test PrepChapter 11
11. What kind of wave does this graph represent?
A. transverse wave C. electromagnetic waveB. longitudinal wave D. pulse wave
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 11–13 on the graph.
Standardized Test PrepChapter 11
11. What kind of wave does this graph represent?
A. transverse wave C. electromagnetic waveB. longitudinal wave D. pulse wave
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 11–13 on the graph.
Standardized Test PrepChapter 11
12. Which letter on the graph represents wavelength?
F. A H. CG. B J. D
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 11–13 on the graph.
Standardized Test PrepChapter 11
12. Which letter on the graph represents wavelength?
F. A H. CG. B J. D
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 11–13 on the graph.
Standardized Test PrepChapter 11
13. Which letter on the graph is used for a trough?
A. A C. CB. B D. D
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 11–13 on the graph.
Standardized Test PrepChapter 11
13. Which letter on the graph is used for a trough?
A. A C. CB. B D. D
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 14–15 on the passage.
A wave with an amplitude of 0.75 m has the same wavelength as a second wave with an amplitude of 0.53 m. The two waves interfere.
Standardized Test PrepChapter 11
14. What is the amplitude of the resultant wave if the interference is constructive?
F. 0.22 m G. 0.53 m H. 0.75 mJ. 1.28 m
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 14–15 on the passage.
A wave with an amplitude of 0.75 m has the same wavelength as a second wave with an amplitude of 0.53 m. The two waves interfere.
Standardized Test PrepChapter 11
14. What is the amplitude of the resultant wave if the interference is constructive?
F. 0.22 m G. 0.53 m H. 0.75 mJ. 1.28 m
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 14–15 on the passage.
A wave with an amplitude of 0.75 m has the same wavelength as a second wave with an amplitude of 0.53 m. The two waves interfere.
Standardized Test PrepChapter 11
15. What is the amplitude of the resultant wave if the interference is destructive?
A. 0.22 m B. 0.53 m C. 0.75 mD. 1.28 m
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Base your answers to questions 14–15 on the passage.
A wave with an amplitude of 0.75 m has the same wavelength as a second wave with an amplitude of 0.53 m. The two waves interfere.
Standardized Test PrepChapter 11
15. What is the amplitude of the resultant wave if the interference is destructive?
A. 0.22 m B. 0.53 m C. 0.75 mD. 1.28 m
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Standardized Test PrepChapter 11
16. Two successive crests of a transverse wave 1.20 m apart. Eight crests pass a given point 12.0 s. What is the wave speed?
F. 0.667 m/sG. 0.800 m/sH. 1.80 m/sJ. 9.60 m/s
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Multiple Choice, continued
Standardized Test PrepChapter 11
16. Two successive crests of a transverse wave 1.20 m apart. Eight crests pass a given point 12.0 s. What is the wave speed?
F. 0.667 m/sG. 0.800 m/sH. 1.80 m/sJ. 9.60 m/s
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Short Response
Standardized Test PrepChapter 11
17.Green light has a wavelength of 5.20 10–7 m and a speed in air of 3.00 108 m/s. Calculate the frequency and the period of the light.
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Short Response
Standardized Test PrepChapter 11
17.Green light has a wavelength of 5.20 10–7 m and a speed in air of 3.00 108 m/s. Calculate the frequency and the period of the light.
Answer: 5.77 1014 Hz, 1.73 10–15 s
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Short Response, continued
Standardized Test PrepChapter 11
18.What kind of wave does not need a medium through which to travel?
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Short Response, continued
Standardized Test PrepChapter 11
18.What kind of wave does not need a medium through which to travel?
Answer: electromagnetic waves
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Short Response, continued
Standardized Test PrepChapter 11
19.List three wavelengths that could form standing waves on a 2.0 m string that is fixed at both ends.
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Short Response, continued
Standardized Test PrepChapter 11
19.List three wavelengths that could form standing waves on a 2.0 m string that is fixed at both ends.
Answer: Possible correct answers include 4.0 m, 2.0 m, 1.3 m, 1.0 m, or other wavelengths such that n = 4.0 m (where n is a positive integer).
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Extended Response
Standardized Test PrepChapter 11
20.A visitor to a lighthouse wishes to find out the height of the tower. The visitor ties a spool of thread to a small rock to make a simple pendulum. Then, the visitor hangs the pendulum down a spiral staircase in the center of the tower. The period of oscillation is 9.49 s. What is the height of the tower? Show all of your work.
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Extended Response
Standardized Test PrepChapter 11
20.A visitor to a lighthouse wishes to find out the height of the tower. The visitor ties a spool of thread to a small rock to make a simple pendulum. Then, the visitor hangs the pendulum down a spiral staircase in the center of the tower. The period of oscillation is 9.49 s. What is the height of the tower? Show all of your work.
Answer: 22.4 m
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Extended Response, continued
Standardized Test PrepChapter 11
21.A harmonic wave is traveling along a rope. The oscillator that generates the wave completes 40.0 vibrations in 30.0 s. A given crest of the wave travels 425 cm along the rope in a period of 10.0 s. What is the wavelength? Show all of your work.
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Extended Response, continued
Standardized Test PrepChapter 11
21.A harmonic wave is traveling along a rope. The oscillator that generates the wave completes 40.0 vibrations in 30.0 s. A given crest of the wave travels 425 cm along the rope in a period of 10.0 s. What is the wavelength? Show all of your work.
Answer: 0.319 m
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Hooke’s Law
Section 1 Simple Harmonic Motion
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Transverse Waves
Section 3 Properties of Waves
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Longitudinal Waves
Section 3 Properties of Waves
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Constructive Interference
Section 4 Wave Interactions
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Destructive Interference
Section 4 Wave Interactions
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Chapter 11
Reflection of a Pulse Wave
Section 4 Wave Interactions