2
PieceMaker Square 1 Design & Manufacture Inc. A: 1 Clark Road · Shelbyville, IN 46176 P: 866-647-7771 · E: [email protected] For more information please visit www.Spida.com
PieceMakerThe PieceMaker is an Automated linear saw designed to feed, cut, print and eject multiple
timber components from stock timber lengths. Its cutting includes all truss members including mitres and birdsmouths.
PieceMaker
Square 1 Design & Manufacture Inc.A: 1 Clark Road · Shelbyville, IN 46176 P: 866-647-7771 · E: [email protected]
For more information please visit
www.Spida.com
PieceMaker
The PieceMaker is an Automated linear saw designed to feed, cut, print and eject multiple timber components from stock timber lengths. Its cutting includes all truss members including mitres and birdsmouths.
Features• Full download capability with Multinail
software including FMS
• Touch Screen Panel PC
• Operational Software simple to use and train
• Easy to calibrate
Options• Dust extraction system
• Incline waste conveyor
• Ink jet timber printer
• Left hand or right hand feed
• Spares kit
© Multinail Machinery · 206A900 · September 2018*Specifi cations and design subject to change, please confi rm details when ordering
PieceMakerPieceMaker
Front view
Top view
48ft 7in
28ft 2in 20ft 5in
14ft
6in
7ft 8
in
3ft 5
in
Specifications Cutting heads 1
Drive motor size 6.7hp
Blade size 17.7in carbide tipped
Infeed conveyor 19ft 8in L x 13ft 4in W
Outfeed conveyor 26ft 3in L x 9ft 2in W
Weight 10000lb (approximately)
Power requirements 63amp, 415v, 3 phase +N +E
Air requirements 1000 L/min,100psi (0.7MPa) 1 inch supply line
Minimum finished length 0.004in
Maximum finished length 19ft 8in
Maximum timber height 3.5in
Maximum timber width 1ft 4in
Minimum mitre angles 15 degrees
Minimum cut angle 2 degrees
