1
Email: [email protected] TableDesigns.com Telephone: (727) 375-1212 Hours of Operation: Monday - Friday 9AM - 5PM EST | Address: 11445 Pyramid Drive, Odessa, FL 33556 7. FLIP OVER FOR FINISHED PRODUCT. 6. CONNECT BASE TO COLUMN BY TIGHTENING NUT. 5. FLIP BASE UPSIDE DOWN AND GUIDE ROD THROUGH BASE’S CENTER HOLE 4. SCREW GLIDES INTO BOTTOM OF BASE 3. PLACE COLUMN OVER ROD 2. FLIP SPIDER AND ROD UPSIDE DOWN, THREADED END OF ROD SHOULD FACE UP 1. SLIDE ROD THROUGH TOP OF SPIDER PARTS LIST (1) Rod (1) Nut (1) Spider (1) Column (1) Base (5) glides TOOLS LIST 7/16” Socket Wrench PIETA TABLE BASE ASSEMBLY INSTRUCTIONS
