Date post: | 13-Sep-2015 |
Category: |
Documents |
Upload: | erlinda-melicado |
View: | 29 times |
Download: | 0 times |
Pilot Pioneer
Advanced Multi-Technology Drive Test Solution
Pilot Pioneer is a flexible multi-technology laptop-based diagnostic tool for indoor and outdoor radio network quality
and services performance measurements. Various services tests can be conducted with the wide range of
supported commercial and up-to-date test terminals. Based on Windows operating system, Pilot Pioneer is a user-
friendly solution that can be used throughout network development lifecycle, therefore allowing system vendor and
network operator to benefit on their investment. Pilot Pioneer displays geo-location map-based data in real time and simultaneously records it for further analysis.
The collected data reflects subscriber perceptions and experience, enabling network operators to fine tune their
network to maximize subscriber satisfaction.
Product Values
For Network Operators, System Vendors and Service Provider
Provides flexible authentication modes, supports multiple commercial test terminals, reduces operational cost, and provides maximum benefit on investment Supports multi-technology indoor and outdoor service tests, applicable throughout network development lifecycle Improves test efficiency with highly integrated and automated services test Provides user-friendly interface for easy operation
For Engineers
Simple and easy operation, user-friendly interface for shorter learning curve Specialized technical support and customized services Automatic device configuration and data collection to reduce workload Integrated common services test and network troubleshooting ability to improve network optimization efficiency
Main Features
Multi-Technology and Multi-Terminal
Supports multiple network technologies: GSM, CDMA, EVDO, WCDMA, HSPA, TD-SCDMA, and FDD/TDD-LTE Supports multiple chipsets test terminals:HiSilicon, Qualcomm, Innofidei, Leadcore, T3G, etc. Supports both Android and iOS operating systems
VoLTE Service Test
Mobile HD voice is the future trend of mobile voice (from
TDM (Time Division Multiplexing) to IP or traditional
switch to soft switch). Based on the IMS (IP Multimedia Subsystem) network, VoLTE (Voice over LTE) delivers
the required voice service over LTE data bearer. Pilot
Pioneer provides VoLTE service test solution to capture
various control plane and user plane data through active
network measurement, evaluate VoLTE network
performance and QoS (quality of service), and provide
network performance and QoE measurement.VoLTE
audio quality measurement with POLQA (MOS)
algorithm is supported.
PBM
PBM (Pulse-sampling Bandwidth Measurement) is a
new radio network bandwidth measurement solution,
with efficient algorithm that occupies little network
resource usage. It may be an alternative network
performance measurement method to FTP in 4G
network technology.
Presentation of Frame Decoding Details
Decoding details of each frame in PHY, MAC, and PDCP
layers can be displayed for LTE network technology.
Carrier Aggregation (CA) Test
LTE Advanced Carrier aggregation is used to utilize
more than one carrier, which may be in contiguous
elements of the spectrum or in different bands, to
increase the overall transmission bandwidth, provide
high data rates, reduce delay, and improve spectrum
usage efficiency. Pilot Pioneer supports Carrier Aggregation test with
Qualcomm and HiSilicon terminals, and statistics of key
parameters (such as MCS, RB, TM, QCI, etc.) for
component carriers or aggregated carriers.
Comprehensive Filter Function
Pilot Pioneer supports comprehensive filter function that
may help users to quickly obtain required information from
large volume of data and thus improves data analysis
efficiency. Users may filter data by parameter, time, region,
state, and combined conditions as required. The filtered
data can be replayed and used for statistics generation
and analysis.
Force Function
Force functions such as lock on frequency, band, and
cell are supported for are supported with dedicated
Qualcomm chipset based devices that has been verified
by DingLi, which allow users to perform tests on specific
frequencies, bands, or cells.
Various Scanner Tests
Pilot Pioneer supports R&S, Anite (supported but not
offered), and PCTEL scanners. Scanning functions
including Pilot (downlink), CW (uplink & downlink),
Spectrum (uplink & downlink), Blind (PCTEL only), and
EPS (PCTEL only) scan are available. SIB/L3 decoding
is also supported.
Flexible Analysis Functions
Various analysis functions are supported, including
Coverage Rate Analysis, Overlapping Coverage
Analysis, Mod3 Analysis, Pilot Pollution Analysis, Cell
Coverage Analysis, and Cell Statistics and Analysis. All
these analysis functions help users to quickly identify
potential network problems and affected areas, while
improving operational efficiency and cost.
1 2