+ All Categories
Home > Documents > Pipeline Inspection Training w. NaviModel -...

Pipeline Inspection Training w. NaviModel -...

Date post: 02-Jul-2018
Category:
Upload: vohanh
View: 250 times
Download: 7 times
Share this document with a friend
of 30 /30
Pipeline Inspection Training w. NaviModel NaviEdit NaviModel - NaviPlot
Transcript
Page 1: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

Pipeline Inspection Training w.

NaviModelNaviEdit – NaviModel - NaviPlot

Page 2: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

Training Schedule:

Day 1: Introduction

Installation of Software

NaviEdit

Day 2: NaviEdit (Continued)

NaviModel

Day 3: NaviModel (Continued)

NaviModel Pipe

Day 4: NaviModel Pipe

NaviPlot

Page 3: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

Scope of Pipeline Inspection with NaviModelLearning Objectives: The course is structured around a dedicated yet general curriculum with the aim being to furnish the trainees with a broad understanding of the EIVA NaviSuite offline software solutions and make them confident in using these software solutions in post-processing situations. The primary focus of the course is post-processing of pipeline inspection data. To enhance trainee competence and confidence, a wide range of typical pipeline-based hydrographic survey data, acquired using the EIVA NaviSuite online software solutions, is used to exemplify typical pipe based post-processing scenarios. For the most part, the course is conducted as hands-on training.

By the end of the course, trainees will be able to:

Install the relevant NaviSuite software solutions Understand the basic architecture of NaviEdit, NaviModel and NaviPlot Conduct editing of multi-beam data in a NaviEdit/NaviModel environment Use the S-CAN automatic cleaning tool Use the various DTM tools in NaviModel Conduct volume and area calculations in NaviModel Understand the concept of video integration in NaviModel Use the pipeline inspection tools in NaviModel Export data from NaviModel using generic as well as built-in tools Create simple plots in NaviPlot Create alignment sheets in NaviPlot using the Chart Layout Manager

Target Group: The course is aimed towards surveyors with some experience of offshore survey work and with a basic

knowledge of hydrographic surveying.

Entry Level: Prior knowledge of the EIVA software solutions is recommended. The language of instruction in the course is

English.

Duration: The duration of the course is 4 days, from 9 A.M. to 4 P.M., including breaks.

Completion: Upon completion, a dedicated EIVA Training Certificate will be issued.

Page 4: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with
Page 5: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with
Page 6: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

Scope of the Offline Course

Page 7: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

Training Curriculum I:

Introduction:• The Company, EIVA

• Download and Knowledgebase

• The Training Site

NaviEdit:• Installation of NaviEdit

• SQL-Server

• Database Management

• Importing of Data

• The Header Editor

• The Data Editor

• The PlanView Editor

• Batch Editing

• Exporting Data

NaviModel:

• General Layout of NM3

• Model Types (TRN & TIN)

• Interpolation Methods (IDW & TIN)

• The Quad Tree Principle

• Indexing a DTM

• Raw Data View

• Cleaning Methods:

• Automatic Cleaning Methods

• S-CAN Score

• S-CAN Components

• Manual Cleaning Methods

• Point Edit Cleaning

• Histogram Plane Cleaning

• Spike Shooting Cleaning

Page 8: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

Training Curriculum II:

NaviModel Pipe:

• The Pipe Object

• Pipetracker Data

• Digitizing the Pipe

• Manual Digitization

• Autoplacing the Pipe

• Runline Information

• Generating the Pipe Object

• Modifying the Pipe

• Creating Sideflags

• Using the Sideflags

• Video Integration

• Offline Eventing

• Exporting Freespans and Burials

• Pipe Listings

NaviModel (Continued):

• Using Toppings:

• Runlines

• Displaylines

• Waypoints

• AutoCAD-files

• CDF-series

• Esri files etc.

• Contours:

• Filled Contours

• Live Contours

• Digitizing Methods

• Exporting Funtionalities:

• Generic Exporter

• Area Export

• Volume and Area Calculations

• Online 3D Visualisation

Page 9: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

Training Curriculum III:

NaviPlot:

• Installation of NaviPlot

• Creating Frames

• Generating Templates

• Using the Lay-out Manager

• Adding XY-data to a Frame:

• Contours & TIN Contours

• Bathy Plot

• Runlines, Display Lines

• DXF / DWG Files

• Profiles (long- and crossprofiles)

• Events and Waypoints

• Coverage

• AutoCad

• Trackplot

• Chart Definition Files

• Adding Profiles to a Frame:

• Longitudinal Profiles

• Cross Profiles

• NPD Profile

• Fix profile

• Event Profiles

• KP Alignment

• Adding Bitmaps to a Frame

• Adding Text to a Frame:

• Using Tagged Text

• Printing and Plotting

• Exporting to AutoCAD (DXF/DWG)

• Zipping an NP-Project

• Saving in IHO S-57 format

Page 10: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

Download & KnowledgebaseThe EIVA Download

site gives users the

possibility to

download latest

versions and

patches of the

various software

packages.

A user can sign up

for login access

and can

subsequently

receive an e-mail

notification when

releases occur on

the various folders.

In the Knowledgebase, FAQ from the

EIVA user community, are listed and

organized relative subjective items like:

software package, popularity, age (latest

addition) etc.

Users are also given the opportunity to

submit a question that will then be

upgraded and included in the

knowledgebase.

Page 11: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

Training & Documentation SiteThe Training & Documentation site

contains all documentation and training

material associated with the EIVA Soft-

and Hardware. It should therefore be

installed whenever installing the EIVA

software (is not a requirement for the

proper functioning of the associated

software.

The documentation includes all on-line

help, manuals, powerpoints, reports,

papers, training documents available for

the EIVA software packages as well as

for the EIVA hardware.

The site is designed to be executed in

off-line mode (with no connection to the

Internet), however some of the items

will only provide optimum functionality if

an Internet connection has been

established. Observe that the site can

also be reached at the EIVA Website

http://download.eiva.dk/online-

training/index.htm

Page 12: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

Training & Documentation Site IIThe Training & Documentation

site is subdivided into subpages

that relate to the different

modules that constitute EIVA

NaviSuite.

The Offline packages have

three subpages, related to:

• NaviEdit

• NaviModel (shown here)

• NaviPlot.

Page 13: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

The Software Installer lists the

software packages in the

sequence shown to the left.

During installation, always

remember to use default

settings.

Software Installation

Page 14: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

The EIVA Offline Flow

Page 15: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

The NaviEdit Flow

Page 16: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

NaviEdit JobPlanner

Page 17: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

NaviModel Patch Testing

Patch Testing can be performed in NaviModel and in the Online3D application. In the latter case, no dongleis required.

Page 18: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

A multibeam Patch Test calibration serves a dual purpose:

a. To determine the mount angles of the multibeam transducer

relative to the three axes of the local coordinate system of the

vessel/ROV. These three figures are often referred to as the roll-,

pitch- and heading mount angles.

b. To confirm the relationship between the time-tagging on the

multibeam data and the time-tagging on the position data. This

figure is often referred to as the latency or as the time value.

Patch Test – Purpose of the Calibration

Page 19: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with
Page 20: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

The NaviModel Pipe Flow

Page 21: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

NaviModel - I

Page 22: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

NaviModel – II

The QuadTree Principle

Page 23: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

• TRN Geometry Type:

• Square cells divided into four triangles each

• To ensure a smooth transition between cells

NaviModel – III

Geometry Types - I

Page 24: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

• The TIN geometry type:

• TIN Model, left

• Delaunay Triangulation, principle, right (circumcised circles between corners of

triangles must not contain other points)

NaviModel – IV

Geometry Types - II

Page 25: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

NaviModel – V

Interpolation

Page 26: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

NaviModel – VI

Page 27: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

The NaviPlot Flow

Page 28: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

NaviPlot - I

Page 29: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

NaviPlot - II

Page 30: Pipeline Inspection Training w. NaviModel - EIVAdownload.eiva.dk/online-training/EivaSoftware_NaviModel_Pipe... · Training Schedule: Day 1: ... Scope of Pipeline Inspection with

Recommended