+ All Categories
Home > Documents > Piping & Pipe Rack - MetalCarpenteria · Piping & Pipe Rack On-shore and Off-shore Plants INDUSTRIE...

Piping & Pipe Rack - MetalCarpenteria · Piping & Pipe Rack On-shore and Off-shore Plants INDUSTRIE...

Date post: 14-Mar-2020
Category:
Upload: others
View: 88 times
Download: 0 times
Share this document with a friend
4
Piping & Pipe Rack On-shore and Off-shore Plants
Transcript

Piping & Pipe Rack

On-shore and Off-shore Plants

INDUSTRIE MECCANICHE CREMONESISS. Codognese 234 - 26020 Acquanegra Cremonese (CR) ITALY

Tel. +39 0372.722426

www.imc-cr.it

CenterkitAtyrau /[email protected]

Within On-shore and Off-shore plants, we can supply

to the Customer al l the phases: engineering, piping

assembly and assembling of carpentry and electrical

parts.

Using this methoodoligy, the global managing time

and the on-site costs are significantly reduced.

In the event of a plant revapimg we can prefabricate

pipng spool fol lowing Customer’s design: material

procurement (with a guaranteed traceability thanks

to ISO 9001 Certification procedures), piping fit-up

and assembly, Non Destructive Examination and

surface protection treatment.

PIPING & PIPE RACKPROJECT ENGINEERING

CARPENTRY ASSEMBLY

ELECTRICAL ASSEMBLY

If it was commissioned to build the

pipe rack or structures, we can also

p e r f o r m a s h o p p r e - a s s e m b l y ,

witnessed by the final Customer

before shipment.

Pre-Assembly

Within On-shore and Off-shore plants, we can supply

to the Customer al l the phases: engineering, piping

assembly and assembling of carpentry and electrical

parts.

Using this methoodoligy, the global managing time

and the on-site costs are significantly reduced.

In the event of a plant revapimg we can prefabricate

pipng spool fol lowing Customer’s design: material

procurement (with a guaranteed traceability thanks

to ISO 9001 Certification procedures), piping fit-up

and assembly, Non Destructive Examination and

surface protection treatment.

PIPING & PIPE RACKPROJECT ENGINEERING

CARPENTRY ASSEMBLY

ELECTRICAL ASSEMBLY

If it was commissioned to build the

pipe rack or structures, we can also

p e r f o r m a s h o p p r e - a s s e m b l y ,

witnessed by the final Customer

before shipment.

Pre-Assembly

Piping & Pipe Rack

On-shore and Off-shore Plants

INDUSTRIE MECCANICHE CREMONESISS. Codognese 234 - 26020 Acquanegra Cremonese (CR) ITALY

Tel. +39 0372.722426

www.imc-cr.it

CenterkitAtyrau /[email protected]

esterleli
Stamp

Recommended