Ball valves for the Gas IndustryBall valves for the gas industry, petrochemical industry or power plants always measure up to special specifications. As spezial mediums are required some of the ball valves have to be in stainless steel and with flanges.
Pister Kugelhähne offers a wide range of high pressure ball valves for gas supply appliances.
Design Ball valves for the Gas Industry
300.1
/ 3.1
3 /
Gas
ud
ust
ry /
E /
1.0
Pister Kugelhähne GmbHVogesenstrasse 37D-76461 MuggensturmGermany
Fon: +49 (0) 72 22 - 50 02 - 0Fax: +49 (0) 72 22 - 50 02 - 50E-Mail: [email protected] Internet: www.pister-gmbh.com
DN10 to DN50 FKH for DN65 to DN200 High Pressure: up to 400bar Materials: stainless steel and carbon steel O-Rings: NBR,FKM, HNBR Ball seats: PTFE, PVDF, PEEK It is possible to deliver with actuator
Advantages of our products antistatic-function anti blow-out stem for high pressure applications anti-seize function special sealing system: protection against deformation and damage
Outer and inner diameter of the ball seat is protec-ted against deformation and damage
Ball valve with cover DFG, DFA
no metal-metal contact between stem and valve body
bushing
backup ring
o-ring
thrust ring
stem