The washable, stain-, abrasion-, and scuff-resistant finish of PPG Pitt-Glaze WB1 Water-Borne Acrylic Epoxy Single Component helps maximize protection and service life in high-traffic areas. This durable product has excellent hide and coverage, minimizing the number of coats that are required. With its fast dry time, low-VOC content, and low-odor, this water-borne acrylic epoxy is ideal for use in renovation and new construction of commercial and institutional facilities and ensures the service needed to avoid facility disruptions.

BEST FOR USE INEducational Institutions

Hospitality Establishments

Healthcare Facilities

Corporate Spaces

Retail Locations

MEETS ALL YOUR NEEDS INHallways and Aisles

Stairwells and Lobbies

Locker Rooms, Restrooms and Gymnasiums

Offices and Meeting Rooms

Fitting Rooms and Closets

PITT-GLAZE® WB1 INTERIORPRE-CATALYZED WATER-BORNE ACRYLIC EPOXY

PPG Pitt-Glaze WB1 is better than or comparable to leading competitors in scuff-resistance.Results are from internal testing and may vary slightly.

SCUFF RESISTANT COMPARISONSPitt-Glaze WB1

Leading Competitor A

Leading Competitor B

PITT-GLAZE® WB1 INTERIOR PRE-CATALYZED WATER-BORNE ACRYLIC EPOXYFEATURES/BENEFITS:• Single component, water-based formula

• Fast dry time and low-odor allows product to be applied in occupied areas

• Excellent abrasion, impact, chemical, and stain resistance, and resists mildew on the dry paint film

• No mixing or measuring and unlimited pot life

• Economical solution for new commercial construction and paint maintenance

• Less than 100g/L VOC content

• Meets MPI #151 and #153

• Meets Greenguard Gold criteria and is eligible for LEED® v4 EQ Credit: Low-Emitting Materials and MR Credit: Environmental Product Declaration

PITT-GLAZE WB1 EGGSHELLCODE BASE SIZES

16-310 White/Pastel 1s, 5s

16-340 Neutral 1s, 5s

PITT-GLAZE WB1 SEMI-GLOSSCODE BASE SIZES

16-510 White/Pastel 1s, 5s

16-540 Neutral 1s, 5s

Visit ppgpaints.com for more information.

PPG PAINTS™ • 400 Bertha Lamme Drive • Cranberry Township, PA 16066 • Technical Service: 1-800-441-9695

©2018 PPG Industries, Inc. All rights reserved. The PPG Paints Logo is a trademark of PPG Industries, Ohio Inc. Pitt-Glaze is a registered trademark of PPG Architectural Finishes, Inc. LEED is a registered trademark of the US Green Building Council. ST404370

1. PREPARESelect personal protective equipment, surface preparation supplies, and ensure nearby surfaces are protected.

2. PRIME & SEALPrime the surface with our problem-solving products, if applicable.

3. FINISHApply top coat for a beautiful finish.

RECOMMENDED 3-STEP PAINTING PROCESS