PLANKWALL Merchandising
Systems
Catalogue
2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall
Hi-density merchandising (50mm centre groove spacing)
Complete showroom presentation for a wide variety of merchandise
Complete range of accessories for activewear & sporting goods, including mobile displays
Slatwall with security showcases fitted to front
iNSPiRatioNS
Inspired Retail Concepts 1
SlatwalliNSPiRatioNS
CONTENTS PAGE
Panels and Inserts 3 - 7
Installation Accessories 8
Installation Instructions 9 - 10
ALL-ALI 11 - 12
UNI-SLAT 13
Clothing Accessories 14 - 15
Hangsell Prongs 16 - 18
Hangrail Accessories 19
Shelf Brackets 20 - 22
Shelving 23
Acrylic Shelves 24 - 26
Wire Shelves 27
Wire Baskets 28
Golf Club Display 29
Small Shelves 30 - 31
Wire Sports Displays 32
Pen Containers 33
Greeting Card Displays 34
Magazine Displays 35
Brochure Holders 36 - 39
Display Panels 40 - 41
Gondolas 42
Display Units 43 - 45
2 2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall
Complete range of accessories for activewear & sporting goods, including mobile displays
white slatwall enhanced with full-colour graphics for a strong branding statement
Slatwall wall panelling & mobile gondolas for fully interchangeable merchandising
Inspired Retail Concepts 3
SlatwallPaNelS aNd iNSeRtS
groove Spacing No. inserts per panel
100mm (standard) 11.5
50mm 23.5
75mm 15.5
150mm 7.5
(the ½ quantity allows for horizontal joining insert when using more than single panel height)
PlaNKwall - auStRalia’S FavouRite meRCHaNdiSiNg PaNel• The display system of choice for a broad spectrum of retailers requiring flexible merchandising capabilities and superior finished
appearance.
• Our huge range of accessories simply hook into the grooves and can be changed around just as simply to provide endless flexibility. You
can select from prongs for hangsell, faceouts and hangrails for clothing to a full range of shelving options. You are never limited with
PLANKWALL merchandising panels – changing accessories can be done in a flash.
• Colour range – Plankwall is stocked in a range of basic commodity colours that provide for most applications. We can also rout any board
from any manufacturer to your exact specifications.
• The strength of the panel is enhanced by the aluminium insert in the groove, allowing excellent weight-bearing capacity.
• The Aluminium groove inserts provide a refined finished product that will enhance your merchandise presentation.
1200mm
2400mm
the Core – 18mm MDF
sourced only from sustainably
managed forests in Australia or
New Zealand.
the Face – durable, high-
quality melamine surface for
long lasting appearance and
easy care.
the groove & insert – the
strength of the panels is
derived from the aluminium
insert that slides easily into the
precision-machined groove
(see below for the inserts
required for some common
panel configurations).
top ½ groove – allows panels to
be placed on top with an invisible
horizontal join.
tHe aNatomy oF a PlaNKwall PaNel
4 2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall PaNelS aNd iNSeRtS
Part No. length (mm) Finish
aP4255 2400mm Mill finish
aP4255Bla 2400mm Black anodised
Part No. length (mm) Finish
aP4260BK 2400mm Black
aP4260wH 2400mm White
wHite – SiNgle FaCed• Economical option with melamine face on front face only.
Back – raw MDF
• Panel size – 2400mm(L) x 1200mm(H)
• Material – 18mm thick MDF
aP4010
BlaCK – SiNgle FaCed• Economical option with melamine face on front face only.
Back – raw MDF
• Panel size – 2400mm(L) x 1200mm(H)
• Material – 18mm thick MDF
aP4011Bla
alumiNium iNSeRtS • Purchase inserts separately – refer to Groove Table for
quantity required per sheet. (Page 3)
PvC iNSeRtS• Decorative option where strength not required.
• PVC inserts can be installed from the front of the panel after
fitting to the wall.
• Purchase inserts separately – refer to Groove Table for
quantity required per sheet. (Page 3)
Inspired Retail Concepts 5
SlatwallPaNelS aNd iNSeRtS
wHite• Panel size – 2400mm(L) x 1200mm(H)
• Material – 18mm thick MDF
BlaCK• Panel size – 2400mm(L) x 1200mm(H)
• Material – 18mm thick MDF
oySteR gRey• Panel size – 2400mm(L) x 1200mm(H)
• Material – 18mm thick MDF
PlaiN PaNel • AP9072
PlaiN PaNel • AP9074BK
PlaiN PaNel • AP9074FGY
Slatwall PaNel • AP4020
Slatwall PaNel • AP4021BK
Slatwall PaNel • AP4021FGY
Slatwall PaNel • With standard aluminium inserts
(order inserts separately)
Slatwall PaNel • With standard aluminium inserts
(order inserts separately)
Slatwall PaNel • With standard aluminium inserts
(order inserts separately)
Slatwall PaNel • With black aluminium inserts
(order inserts separately)
Slatwall PaNel • With black aluminium inserts
(order inserts separately)
Slatwall PaNel • With black aluminium inserts
(order inserts separately)
6 2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall
BeeCH (goldeN BeeCH)• Panel size – 2400mm(L) x 1200mm(H)
• Material – 18mm thick MDF
maPle (youNg BeeCH)• Panel size – 2400mm(L) x 1200mm(H)
• Material – 18mm thick MDF
oaK (SuBlime teaK) • Panel size – 2400mm(L) x 1200mm(H)
• Material – 18mm thick MDF
PlaiN PaNel • AP9074BEE
PlaiN PaNel • AP9074MAP
PlaiN PaNel • AP9074TEA
Slatwall PaNel • AP4021BEE
Slatwall PaNel • AP4021MAP
Slatwall PaNel • AP4021TEA
Slatwall PaNel • With standard aluminium inserts
(order inserts separately)
Slatwall PaNel • With standard aluminium inserts
(order inserts separately)
Slatwall PaNel • With standard aluminium inserts
(order inserts separately)
Slatwall PaNel • With black aluminium inserts
(order inserts separately)
Slatwall PaNel • With black aluminium inserts
(order inserts separately)
Slatwall PaNel • With black aluminium inserts
(order inserts separately)
PaNelS aNd iNSeRtS
Inspired Retail Concepts 7
SlatwallPaNelS aNd iNSeRtS
ZiNCwoRKS• Panel size – 2400mm(L) x 1200mm(H)
• Material – 18mm thick MDF
BRigHt Red (olymPia Red)• Panel size – 2400mm(L) x 1200mm(H)
• Material – 18mm thick MDF
aCRyliC miRRoR• Panel size – 2400mm(L) x 1200mm(H)
• Material – 18mm thick MDF
PlaiN PaNel • AP9074ALU
PlaiN PaNel • AP9074RED
• You can create some stunning
visual effects with our
highly-reflective acrylic mirror
panels.
• Great for jewellery items and
for highlighting particular
areas in your store.
• (NB. Acrylic mirror is not
a perfectly flat surface like
glass, and may show slight
imperfections to the image)
Slatwall PaNel • AP4021ALU
Slatwall PaNel • AP4021RED
Slatwall PaNel • AP4009
Slatwall PaNel • With standard aluminium inserts
(order inserts separately)
Slatwall PaNel • With standard aluminium inserts
(order inserts separately)
Slatwall PaNel • With standard aluminium inserts
(order inserts separately)
Slatwall PaNel • With black aluminium inserts
(order inserts separately)
Slatwall PaNel • With black aluminium inserts
(order inserts separately)
Slatwall PaNel • With black aluminium inserts
(order inserts separately)
8 2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall
mdF BatteN• Wall-mounting battens provide for simpler installation on
masonry walls by providing a more even mounting surface
and panel joining.
• Available in 18 or 32mm thick to allow for installing panelling
over conduits and other obstructions.
Part No. Size (mm) thickness
aP9400 2350 x 115mm 18mm
aP9401 2350 x 115mm 32mm
alumiNium ‘H’ JoiNeR• Covers small discrepancies between panel joints.
• May be used either way depending on coverage required.
alumiNium ‘u’ CHaNNel• Provides excellent method to finish off panel ends.
• Can be mitred to fit around all 4 sides of the panel.
alumiNium aNgleS• Our range of common angles are a convenient solutions for
various finishing options.
alumiNium RadiuS CoRNeR• A great way of achieving 90 degree corners with a
rounded profile.
Part No. length (mm) Finish
aP4223 2400mm Mill Finish
Part No. length (mm) Finish
aP8110a 5000mm Clear Anodised
Part No. length (mm) Finish
aP4224a 5000mm Clear Anodised
aP4224a/8 2400mm Clear Anodised
Part No. Size (mm) length (mm) Finish
aP9210a 25 x 25mm 6500mm Clear Anodised
aP9215a 20 x 20mm 6500mm Clear Anodised
aP9216a 20 x 12mm 6500mm Clear Anodised
iNStallatioN aCCeSSoRieS
Inspired Retail Concepts 9
SlatwalliNStallatioN iNStRuCtioNS
alumiNium ‘H’ JoiNeR• Covers small discrepancies between panel joints.
• May be used either way depending on coverage required.
alumiNium ‘u’ CHaNNel• Provides excellent method to finish off panel ends.
• Can be mitred to fit around all 4 sides of the panel.
Part No. length (mm) Finish
aP4223 2400mm Mill Finish
Part No. length (mm) Finish
aP8110a 5000mm Clear Anodised
Part No. length (mm) Finish
aP4224a 5000mm Clear Anodised
aP4224a/8 2400mm Clear Anodised
PRoCeSSiNg SeRviCeSYou can take advantage of our full panel processing services at ADP STORE FIXTURES. This can take a lot of hassle out of the shopfitting experience.
Here are some of the ways that we can assist you to make your next project more streamlined and efficient:
Cut to SiZe SeRviCe • We can accurately cut panels to your specified sizes with
aluminium inserts to suit and deliver direct to site. This
eliminates the OH & S issues that arise from processing on
site and save a lot of mess and dust in existing shops. We
currently cut panels in our facility and ship around the country
to arrive at your destination all ready to assemble.
Slatwall iNStallatioN guideThe following information is a basic guide for installing slatwall.
Please note, slatwall is a wood-based product and susceptible to expansion & contraction when exposed to different temperatures & moisture levels.
Panels should be stored flat in dry conditions and should be allowed to acclimatize to the environment where they will be installed for at least 48 hours
prior to installation.
Please take care in manual handling as each slatwall board weighs approximately 40kg. Care should be taken in handling not to damage the groove
edges when sliding panels over each other and not to damages the edges of the panel, which will result in the panel surface becoming chipped.
FiXiNg metHodSThe following are the most common fixing methods:
• direct fix to existing walls – this is generally fine for plasterboard stud-framed walls, where the panels can be fixed directly into the studs/wall-
framing.
• direct fix to framework – slatwall panels can be fixed directly into steel or timber stud framework without any need for plasterboard sheeting.
Where the joins on the sheets don’t come on a stud, the join in the panels can be fitted with “back-blocks” – MDF/timber strips that can be
screwed onto the back of the panel across the join.
• Batten – fixed – this is our preferred method of fixing for masonry walls and takes up any discrepancies in the wall that make the panels difficult to
fit. We supply wither 18mm MDF or 70 x 35mm pine battens. This allows for spacing from the wall so that the panel can continue over structural
members or electrical conduits.
PaNel edgiNg • Pre-cut panels can be assembled and edged with 2mm
PVC edging.
alumiNium SPlit BatteN mouNtiNg• Smaller pre-cut panels can be fitted with our aluminium split
batten extrusion to allow for easy on-site wall fixing.
alumiNium CaPPiNg • Panels can be assembled to your specified size and capped
with our Aluminium ‘U’ channel with mitred corners.
10 2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall
CuttiNg PaNelS oN-SiteIf you are cutting the panels on site using a portable circular saw or a jigsaw, do all of the marking & cutting from the back to avoid damaging
the face of the panel. Slatwall panels can be cut with standard woodworking tools – a TCT saw blade with a negative rake allows you to cut the
aluminium inserts in the panel.
Calculate the wall length so that you can put the cut edge into the corner first and then place the adjacent panel over the top of the cut edge.
Alternatively, if a cut edge is on the end, you can cover up with our aluminium ‘U’ channel.
iNStallatioN• Fixing battens into masonry – use minimum 50mm long Green wall plugs, requiring a 6.0 – 6.5mm diameter masonry drill bit, depending on
the hardness of the wall. The length of screw will need to be approximately 50mm longer than the thickness of the batten. Screw through the
batten and into wall plug. Plan your layout so that the joins in the slatwall panels always comes on the centre of a batten.
• Battens must be fixed at maximum spacings of 600mm. Heavier merchandise may require closer batten spacing.
• When installing panels one above the other, always fix the bottom panel first, making sure it is perfectly level. Check the floor level and ensure
that you have some spacing at the bottom of the panel to allow for floor discrepancies.
there are 2 main methods of fixing panels to the battens:
1) Fixing through the aluminium insert – this provides the strongest
fixing but the visibility of screws on the aluminium detract from
the overall appearance of the panel.
To use this method, slide inserts into the slatwall panel and drill
5.5mm diameter holes into the aluminium inserts to line up with
the battens. Fix onto the batten with 28mm countersunk chipboard
screws (zinc-plated)
2) Fixing through the groove of the slatwall panel and then sliding
the aluminium insert into the panel once fixed onto the wall. This
is not quite as strong but is a lot simpler method and looks a
whole lot better. Here are some things to bear in mind with this
method:
i) You can only do this where you have the length to slide an insert
into the end of the panel. In corners, you must revert back to
Method 1.
ii) It is a lot harder to remove the panel from the wall as the screws
are concealed – this may be a consideration in temporary or
pop-up locations.
To use this method, simply screw straight through the panel groove
using 28mm countersunk chipboard screws. The head of the
screw must be flush with the back of the groove (to allow the insert
to slide in) but not recessed too much into the board, which will
weaken the fixing.
• Number of fixings per panel – we recommend 5 fixings across
the length of the sheet (i.e. at each end and 600mm centres
in between) and in every second groove.
• We recommend starting with random lengths of aluminium so
that the inserts protrude from the end of the sheet. This allows
for panels to be easily aligned when fixing and makes the
panel joint much less visible.
iNStallatioN iNStRuCtioNS
Inspired Retail Concepts 11
Slatwallall - ali
the PlaNKwall all-ali system is a range of extruded aluminium profiles that offers modern high-tech design with the following features:• Available in long lengths - 5 metres - for display walls with minimal joins.
• Totally concealed fixing, with each successive plank covering the fixings on the previous one.
• Lightweight and easy to assemble - only requires 1 man installation.
• Extensive colours and finish options available. Stocked in clear anodised finish to give you a sophisticated metallic look or in mill finish
that may be powdercoated in a whole range of colours to your specification.
• The extruded section provides a more seamless finish without the visible distraction of different coloured inserts in the grooves on a
timber panel.
12 2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall
all-ali 50mm• 50mm groove spacing.
• Section thickness – 12mm.
• To calculate overall panel height = (No. Of planks x 150mm) +
Top cap height.
all-ali toP CaP• Clips onto top plank to provide finishing touch and effective
top groove.
all-ali eNd CaP• Aluminium ‘J’ channel.
• 13mm inside.
all-ali 75mm• 75mm groove spacing.
• Section thickness – 12mm.
• To calculate overall panel height = (No. Of planks x 150mm) +
Top cap height.
Part No. effective Height length (mm) Finish
aP4303a 150mm 5000mm Clear Anodised
Part No. effective Height length (mm) Finish
aP4308a 150mm 5000mm Clear Anodised
Part No. effective Height length (mm) Finish
aP4311a 25mm 5000mm Clear Anodised
Part No. effective Height length (mm) Finish
aP4315a 25mm 5000mm Clear Anodised
all - ali
all-ali 25mm• 25mm groove spacing.
• Section thickness – 12mm.
• To calculate overall panel height = (No. Of planks x 150mm) +
Top cap height.
Part No. effective Height length (mm) Finish
aP4305a 150mm 5000mm Clear Anodised
Inspired Retail Concepts 13
Slatwall
Part No. effective Height length (mm) Finish
aP4303a 150mm 5000mm Clear Anodised
Part No. effective Height length (mm) Finish
aP4308a 150mm 5000mm Clear Anodised
Part No. effective Height length (mm) Finish
aP4311a 25mm 5000mm Clear Anodised
Part No. effective Height length (mm) Finish
aP4315a 25mm 5000mm Clear Anodised
uNi-Slat• Extruded aluminium section for applications requiring only a
single level of merchandising.
• Ideal for office workstations, workshop and home applications.
• Clever clip-on brackets leave no visible fixings. Injection-
moulded plastic end caps complete the installation.
eNd CaPS
wall CliPS• Strong white nylon clip. Incorporates wall marking pins.
• Simply attach clips to the back of the extrusion, position on
the wall and tap into place.
• 3 clips recommended per metre.
Part No. Finish
aP4324 White Nylon
Part No. Finish
aP4321l Grey Plastic
aP4321R Grey Plastic
Part No. Height length (mm) finish
aP4320a 95mm 5000mm Clear Anodised
uNi-Slat
Part No. effective Height length (mm) Finish
aP4305a 150mm 5000mm Clear Anodised
14 2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall
Part No. length (mm) Finish CtN Qty
aP850C 300mm Chrome 24
aP850-400C 400mm Chrome 24
Part No. length (mm) Finish CtN Qty
aP851C 300mm Chrome 24
aP851-400C 400mm Chrome 24
Part No. length (mm) Finish CtN Qty
aP859 300mm Chrome 24
Part No. length (mm) Finish CtN Qty
aP880C 400mm Chrome 24
Part No. length (mm) Finish CtN Qty
aP875 600mm Chrome 10
aP877 900mm Chrome 10
StRaigHt FaCeout - SQuaRe tuBe• 20mm square tubing.
StRaigHt FaCeout - ReCtaNgulaR tuBe• 38 x 13mm rectangular tubing.
liNgeRie FaCeout• 16mm diameter tubing with 25mm diameter front disc.
ReCtaNgulaR tuBe HaNgRail• 38 x 13mm rectangular tubing.
• Deluxe mitred corners with ball stops.
CRaNKed FaCeout• 38 x 13mm rectangular tubing.
ClotHiNg aCCeSSoRieS
Inspired Retail Concepts 15
SlatwallClotHiNg aCCeSSoRieS
Part No. length (mm) Finish CtN Qty
aP855C 400mm Chrome 24
Part No. length (mm) Finish CtN Qty
aP857C 500mm Chrome 24
aP857w 500mm White 24
Part No. length (mm) Finish CtN Qty
aP860 400mm Chrome 24
Part No. length (mm) Finish CtN Qty
aP862 375mm Chrome 24
Part No. Finish CtN Qty
aP839 Chrome 200
aP085 Clear Polycarbonate 200
wateRFall aRm - 6 Ball• 20mm square tubing.
• 6 ball stops.
wateRFall aRm - 9 PiN• 20mm square tubing.
• 9 pin stops.
SloPiNg HaNdBag FaCeout• 20mm square tubing.
• 5 “J” Hooks
PiCtuRe HooKS
StRaigHt HaNdBag FaCeout• 38 x 13mm rectangular tubing.
• 5 “J” Hooks
16 2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall
Part No. length (mm) Finish CtN Qty
aP840-75C 75mm Chrome 100
aP840C 100mm Chrome 100
aP841C 150mm Chrome 100
aP842C 200mm Chrome 100
aP843C 250mm Chrome 100
aP844C 300mm Chrome 100
Part No. length (mm) Finish CtN Qty
aP820 100mm Chrome 100
aP821 150mm Chrome 100
aP822 200mm Chrome 100
aP823 250mm Chrome 100
Part No. length (mm) Finish CtN Qty
aP828 300mm Chrome 100
aP829 400mm Chrome 100
Part No. Size Finish CtN Qty
aP825 50mm(W) x 32mm(H) Clear 500
aP826 76mm(W) x 32mm(H) Clear 500
Heavy-duty PRoNgS• With metal back plate.
• 6mm dia. wire with rounded end.
SCaNNiNg HooKS• All metal design with flat back plate to prevent wall being
marked.
• 4.5mm diameter wire.
• Order label holders seperateley.
Heavy-duty SCaNNiNg HooKS• All metal design with large back plate to prevent wall being
marked.
• 6.0mm diameter wire.
• Order label holders seperateley.
SCaNNiNg laBel HoldeRS• Clear plastic holder for all our scanning hooks.
• Clips onto front of hook and hangs vertical.
• Flips up out of the way for easy stock, then falls back into
full view.
• Designed for use with plain paper labels.
HaNgSell PRoNgS
Inspired Retail Concepts 17
SlatwallHaNgSell PRoNgS
Part No. length (mm) CtN Qty
aP086 25mm 250
Part No. length (mm) Finish CtN Qty
aP550 50mm Chrome 500
aP551 100mm Chrome 500
aP552 150mm Chrome 500
aP553 200mm Chrome 500
Part No. length (mm) Finish CtN Qty
aP560 100mm Chrome 250
aP561 150mm Chrome 250
aP562 200mm Chrome 250
aP563 250mm Chrome 250
aP564 300mm Chrome 200
Part No. length (mm) Finish CtN Qty
aP830 100mm Chrome 100
aP831 150mm Chrome 100
aP832 200mm Chrome 100
Part No. length (mm) Finish CtN Qty
aP833 250mm Chrome 100
aP834 300mm Chrome 100
PlaStiC HooK• Clear polycarbonate.
StaNdaRd duty PegBoaRd HooK• 3mm Dia. wire.
Heavy-duty PegBoaRd HooK• 3mm Dia. wire.
Heavy-duty douBle PRoNg• 5mm diameter wire with 50mm wide metal back plate to suit
pegboard or slatwall.
douBle PRoNg• 4mm Diameter wire loop style prong with metal back plate to
suit pegboard or slatwall.
18 2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall
Part No. length (mm) Finish CtN Qty
aP4630 250mm Black 200
aP4631 300mm Black 200
Part No. type Finish CtN Qty
aP847 Open Chrome 100
aP848 Closed Chrome 100
Part No. length (mm) Finish CtN Qty
aP835 270mm Chrome 24
Part No. Finish CtN Qty
aP849 Chrome 100
Part No. length (mm) Finish CtN Qty
aP846/4 1200mm Chrome 10
aP846/6 1800mm Chrome 10
aP846/8 2400mm Chrome 10
imPlemeNt PRoNgS• Double prong injection – moulded from glass reinforced
polymer.
• Perfect for hanging garden implements e.g. shovels, rakes,
brooms, etc.
RouNd tuBe HaNgRail BRaCKet• To suit 25mm diameter chrome tubing.
• Tubing sold separately.
RouNd HaNgRail tuBiNg• 25mm diameter chrome tubing.
• 1.6mm wall thickness.
tuBiNg wall BRaCKetS• To suit 25mm diameter tubing.
FlaNged eNd CaP• Push in flanged end cap.
• 48mm diameter.
HaNgSell PRoNgS
Inspired Retail Concepts 19
SlatwallHaNgRail aCCeSSoRieS
Part No. Finish CtN Qty
aP524 Chrome 100
Part No. length (mm) Finish CtN Qty
aP520 75mm Chrome 100
aP521 150mm Chrome 100
aP522 225mm Chrome 100
aP523 300mm Chrome 100
Part No. Size CtN Qty
aP518l A5 Landscape 48
aP519 A4 Portrait 24
aP519l A4 Landscape 24
Part No. Size CtN Qty
aP545 A4 Portrait 60
aP546 A4 Landscape 60
Part No. Finish CtN Qty
aP5037 White 100
tiCKet FRame attaCHmeNt• Screw-on fitting will clamp onto tubing up to 32mm diameter
or rectangular tubing up to 38 x 13mm.
tiCKet FRame - tHReaded Stem
aCRyliC tiCKet FRame• Chrome base channel with clear acrylic ticket holder.
• Use with threaded stems and attachments.
PlaStiC ClamP tiCKet HoldeR• Clamps onto 25mm diameter chrome tubing or any flat
material up to 18mm thick
• Top clamp to hold laminated tickets.
CHRome tiCKet FRame• Deluxe mitred-corner chrome frame with top opening.
• Use with threaded stems and attachments.
Part No. Finish CtN Qty
aP526 Chrome 200
magNetiC CoRNeR ClamP• Magnetic corner bracket for tubing on racks.
20 2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall SHelF BRaCKetS
metal SHelF BRaCKet
Part No. length (mm) Finish CtN Qty
aP800-150C 150mm Chrome 50
aP800C 200mm Chrome 50
aP801C 250mm Chrome 50
aP802C 300mm Chrome 50
aP803C 350mm Chrome 50
aP804C 400mm Chrome 50
aP805C 450mm Chrome 50
Part No. Finish CtN Qty
aP808 Clear 500
SHelF BRaCKet CliP & gRommet• Clear plastic clip with grey rubber grommet inserted.
• May be used with glass or melamine shelves.
Part No. length (mm) Finish CtN Qty
aP811 250mm Chrome 48
aP812 300mm Chrome 48
aP813 350mm Chrome 48
adJuStaBle SHelF BRaCKet• Adjustable angle brackets adjust from 15o up, flat, 15o, 30o,
45o down.
Part No. Finish CtN Qty
aP817 Chrome 200
FRoNt eNd StoP• 50mm long overall to retain sloping shelves.
Part No. length (mm) Finish CtN Qty
aP6340 305mm Chrome 48
aP6341 335mm Chrome 48
SHelF BRaCKet witH FRoNt liP• With front lip.
• Specially for use with injection moulded shelves. (See p.26)
Inspired Retail Concepts 21
SlatwallSHelF BRaCKetS
Part No. length (mm) Finish CtN Qty
aP893 270mm Powdercoat Silver 25
aP895 350mm Powdercoat Silver 25
Part No. length (mm) Finish
aP5362C 350mm Chrome
aP5362w 350mm White
aP5363C 400mm Chrome
aP5363w 400mm White
aP5364C 450mm Chrome
aP5364w 450mm White
aP5365C 500mm Chrome
aP5365w 500mm White
Part No. length (mm) Finish CtN Qty
aP837C 2 Slot Chrome 200
aP837w 2 Slot White 200
aP838C 3 Slot Chrome 200
aP838w 3 Slot White 200
Part No. length (mm) Finish
aP5359C 200mm Chrome
aP5359w 200mm White
aP5360C 250mm Chrome
aP5360w 250mm White
aP5361C 300mm Chrome
aP5361w 300mm White
Slotted SHelF BRaCKetS - 3-lug• 40mm Pitch.
Flat BaR SHelF BRaCKet• Unobtrusive design with 25x6mm flat bar.
• Includes 2 x clip on shelf rests.
Slotted SHelF BRaCKetS - 2-lug• 40mm Pitch.
Slotted adaPtoRS• Converts 40mm pitch slotted brackets into slatwall shelf brackets.
Part No. Style Finish CtN Qty
aP9300 Raw Slatwall Raw Steel 200
aP9300C Slatwall Chrome 200
aP9301C Pegboard Chrome 200
metal BaCKPlateS• Standard back plates available for various attachments or
custom-made fixtures.
• Size: 50mm(W) x 70mm(H).
22 2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall SHelF BRaCKetS
Part No. length (mm) Finish CtN Qty
aP890/2 50mm Anodised 100
Part No. length (mm) Finish CtN Qty
aP891/2 50mm Anodised 100
Part No. length (mm) Finish CtN Qty
aP891/5m 5000mm Anodised 2
Part No. length (mm) Finish CtN Qty
aP890/5m 5000mm Anodised 2
Part No. length (mm) Finish CtN Qty
aP892 50mm Translucent 100
alumiNium SHelF eXtRuSioN (FoR 6/8mm glaSS SHelveS)• Full lengths available for special applications.
SHelF ReSt• For keeping shelves level – Slides firmly into front of extrusion.
(Simply break off the piece that you need and discard the
other part)
alumiNium SHelF BRaCKet (FoR 16/18mm melamiNe SHelveS)• Minimalist design for safely supporting shelves up to
400mm deep.
• Supplied with set of shelf rests for 16mm & 18mm thick
melamine shelves.
alumiNium SHelF BRaCKet (FoR 6/8mm glaSS SHelveS)• Minimalist design for safely supporting shelves up to
300mm deep.
• Supplied with set of shelf rests for 6mm & 8mm thick glass
shelves.
alumiNium SHelF eXtRuSioN (FoR 16/18mm melamiNe SHelveS)• Full lengths available for special applications.
Inspired Retail Concepts 23
SlatwallSHelviNg
Part No. Size thickness
aP4170 600mm(W) x 250mm(D) 6mm
aP4171 600mm(W) x 300mm(D) 6mm
aP4172 600mm(W) x 350mm(D) 6mm
aP4173 600mm(W) x 450mm(D) 6mm
aP4175 900mm(W) x 250mm(D) 6mm
aP4176 900mm(W) x 300mm(D) 6mm
aP4177 900mm(W) x 350mm(D) 6mm
aP4178 900mm(W) x 450mm(D) 6mm
aP4180 1200mm(W) x 250mm(D) 6mm
aP4181 1200mm(W) x 300mm(D) 6mm
aP4182 1200mm(W) x 350mm(D) 6mm
aP4183 1200mm(W) x 450mm(D) 6mm
Part No. Size thickness
aP4141 600mm(W) x 300mm(D) 18mm
aP4142 600mm(W) x 400mm(D) 18mm
aP4146 900mm(W) x 300mm(D) 18mm
aP4147 900mm(W) x 400mm(D) 18mm
aP4151 1200mm(W) x 300mm(D) 18mm
aP4152 1200mm(W) x 400mm(D) 18mm
Part No. length
aP4120 600mm
aP4121 900mm
aP4122 1200mm
Part No. length
aP4130 600mm
aP4131 900mm
aP4132 1200mm
melamiNe SHelveS – 18mm tHiCK• 18mm thick MDF stocked in white melamine or manufactured
to order in a full range of our standard colours (See Page )
• Shelves are edged with 2mm PVC edging for superior
durability
glaSS SHelveS• 6mm thick toughened shelves with polished edges and front 2
corners with 10mm radius
alumiNium SHelF FRoNt• 50mm aluminium angle screwed onto front of shelf.
** Order melamine shelf separately.
aCRyliC SHelF FRoNt• 80mm high clear front for retaining merchandise.
** Order melamine shelf separately.
24 2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall aCRyliC SHelveS
aCRyliC SHelveS witH liP• Simple & versatile method of displaying merchandise in a
flat or sloping configuration by combining our selection of
shelves with your choice of standard brackets.
• Shelves have a 30mm or 80mm high front lip for retaining
merchandise.
• Brackets are manufactured from unbreakable
polycarbonate material.
dowNSloPe 25° BRaCKet• With moulded pin for retaining shelves.
Part No. length Finish CtN Qty
aP148 150mm Clear Polycarbonate 180
dowNSloPe 60° BRaCKet• With moulded pin for retaining shelves.
Part No. length Finish CtN Qty
aP149 150mm Clear Polycarbonate 180
+ =oR
oR
oR
uPSloPe 10° BRaCKet• Includes slide on locking stud and friction pad for holding
shelves.
Part No. length Finish CtN Qty
aP164 130mm Clear Polycarbonate 180
Flat Shelf - upturned lip
Flat Shelf - down-turn lip
Sloping Shelf -
upturned lip
Inspired Retail Concepts 25
SlatwallaCRyliC SHelveS
Part No. length Finish CtN Qty
aP165 180mm Clear Polycarbonate 225
aP166 230mm Clear Polycarbonate 175
aP167 280mm Clear Polycarbonate 120
Part No. Finish CtN Qty
aP168 Clear Polycarbonate 200
aP169 Translucent Soft Plastic 200
Part No. length depth lip Height CtN Qty
aP110 580mm 150mm 30mm 10
aP112 580mm 230mm 30mm 10
aP114 580mm 290mm 30mm 10
aP130 580mm 290mm 80mm 10
Part No. to suit shelf thickness CtN Qty
aP898/4 4mm 200
aP898/6 6mm 200
Flat SHelF BRaCKet• Includes slide-on locking stud for holding shelves secure and
front shelf rest for maintaining level.
loCKiNg Stud & SHelF ReSt • Included with shelf brackets where required, but also
available separately.
aCRyliC SHelveS - witH liP• Heavy-duty 4mm thick clear acrylic.
To be used in conjunction with shelf brackets above – order
separately).
• 2 Brackets required per shelf.
miNi SHelF BRaCKet • Strong injection-moulded polycarbonate bracket for supporting
narrow glass or acrylic shelves – up to 150mm deep.
• Select from bracket to suit 4mm or 6mm thickness material.
12
12
26 2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall
Part No. Finish CtN Qty
aP174 Clear Acrylic 4
Part No. Finish CtN Qty
aP210 Clear Acrylic 4
Part No. dimentions Finish CtN Qty
aP930 300mm(W) x 130mm(D) Gloss White 20
Part No. dimentions Finish CtN Qty
aP934 450mm(W) x 130mm(D) Gloss White 20
aP935 450mm(W) x 300mm(D) Gloss White 20
deeP diSPlay BiN• Dimensions - 240mm(W) x 200(D)
• Back height – 145mm
• Front height – 75mm
deeP diSPlay BiN witH SloPiNg SideS• With radiussed ends.
• Dimensions - 240mm(W) x 200(D)
• Back height – 200mm
• Front height – 150mm
metal SHelF• Metal shelves with gusseted sides for convenient display of
merchandise.
Small metal SHelF• Metal shelves with gusseted sides for convenient display of
merchandise.
Part No. Size Finish CtN Qty
aP6336 610mm x 330mm Frosted Plastic 6
aP6337 1220mm x 330mm Frosted Plastic 6
aP6336 1220mm x 380mm Frosted Plastic 6
Bull-NoSed tRaNSPaReNt SHelF• New plastic shelf in a frosted transparent finish.
• Provides exciting merchandising possibilities.
• Moulded in one piece plastic with strengthening ribs – virtually
unbreakable.
• See page 20 for brackets.
aCRyliC SHelveS
Inspired Retail Concepts 27
SlatwallwiRe SHelveS
Part No. type Finish CtN Qty
aP936 AP931 Chrome 36
aP938 AP933 Chrome 36
metal SHelF• Metal shelves with gusseted sides for convenient display of
merchandise.
Flat wiRe SHelF• Convenient wire shelves allow for dust-free display.
• 75mm(H) front lip.
SloPiNg wiRe SHelF• Convenient wire shelves allow for dust-free display.
• 75mm(H) front lip.
BaSKet divideR• Provides possibilities for compartmenting the basket while
giving extra support.
loNg wiRe BaSKet• May be supported from either front or back to provide either
flat or sloping display.
• Use with AP942 brackets for attaching to slatwall.
Part No. dimentions Finish CtN Qty
aP943 580mm(W) x 130mm(D) Gloss White 20
aP944 580mm(W) x 300mm(D) Gloss White 20
Part No. dimentions Finish CtN Qty
aP911 600mm(W) x 375mm(D) Chrome 10
Part No. dimentions Finish CtN Qty
aP912 600mm(W) x 375mm(D) Chrome 10
Part No. dimentions Finish CtN Qty
aP931 1220mm(W) x 300mm(D) x 200mm(H)
Chrome 8
aP933 1220mm(W) x 400mm(D) x 200mm(H)
Chrome 8
28 2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall wiRe BaSKetS
Part No. Finish CtN Qty
aP942 Chrome 50
Part No. dimentions Finish CtN Qty
aP904 300mm(W) x 300mm(D) x 200/100mm(H)
Chrome 10
Part No. dimentions Finish CtN Qty
aP905 600mm(W) x 300mm(D) x 100mm(H)
Chrome 10
Part No. dimentions Finish CtN Qty
aP901 300mm(W) x 150mm(D) x 150mm(H)
Chrome 10
Part No. dimentions Finish CtN Qty
aP903 300mm(W) x 300mm(D) x 200mm(H)
Chrome 10
PlaNKwall attaCHmeNt BRaCKet• 3 Brackets per basket recommended.
Small wiRe BaSKet
wiRe BaSKet
Flat wiRe BaSKet
wiRe BaSKet witH SloPiNg SideS
Flat wiRe SHelF witH SuRRouNd
Part No. dimentions Finish CtN Qty
aP40290 535 x 150mm Chrome 50
Inspired Retail Concepts 29
SlatwallgolF CluB diSPlay
CluBRaXtm
Welcome to the home of Clubrax®, the unique golf club displayer
for professionals that grips the club shaft firmly but gently.
Enables you to display golf clubs ‘sole out’, showing off the
manufacturer’s logo to its full advantage.
Manufactured from virtually unbreakable nylon-filled plastic for
maximum durability.
StaNdaRd CluB diSPlay• For a full set of irons or full set of irons with woods.
CiRCulaR CluB diSPlay• Displays up to 14 clubs in a semi-circular configuration
maXimiZeR” CluB diSPlay• Displays up to 9 clubs in a very small wall space.
• NB. 8 units pictured – plinth not required or included.
Part No. Finish CtN Qty
aP361 Black Nylon Plastic 10
Part No. Finish CtN Qty
aP362 Black Nylon Plastic 10
Part No. Finish CtN Qty
aP363 RH Clubs Black Nylon Plastic 25
aP364 lH Clubs Black Nylon Plastic 25
30 2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall Small SHelveS
Part No. dimentions CtN Qty
aP108 400mm(W) x 290mm(D) 14
aP107 400mm(W) x 240mm(D) 13
Part No. dimentions CtN Qty
aP185 250mm(W) x 120mm(D) 150
Part No. Shelf Size ticket Size CtN Qty
aP125 250mm(W) x 100mm(D)250mm(W) x
30mm(H)100
Small Flat aCRyliC SHelveS
Flat SHelF• Injection moulded styrene
Flat SHelF witH tiCKet liP• Injection moulded styrene
oval SHelF• Injection moulded styrene - frosted
Part No. dimentions thickness CtN Qty
aP097 125mm(W) x 75mm(D) 3mm 200
aP099 300mm(W) x 150mm(D) 4mm 80
Part No. dimentions thickness CtN Qty
aP090 250mm(W) x 100mm(D) 3mm 180
aP091 250mm(W) x 100mm(D) 4mm 100
Flat aCRyliC SHelF• Injection moulded styrene
Inspired Retail Concepts 31
SlatwallSmall SHelveS
Flat SHelF witH tiCKet liP• Injection moulded styrene
Part No. Shelf Size ticket Size CtN Qty
aP127 250mm(W) x 100mm(D)250mm(W) x
50mm(H)100
SloPiNg SHelF• Injection moulded styrene.
• 15 Deg down slope for caps, a pair of shoes, etc.
Part No. Shelf Size CtN Qty
aP146 175mm(W) x 295mm(D) 30
Part No. Shelf Size CtN Qty
aP069 90mm(W) x 260mm(D) 48
Swivel SHoe SHelF - toe StoP• Injection moulded clear plastic.
Folded SPeCtaCle diSPlayeRS• Injection-moulded clear plastic.
• Displays folded spectacles.
SPeCtaCle diSPlayeR• Injection-moulded clear plastic.
• Displays open spectacles.
Part No. length CtN Qty
aP247 50mm 300
aP243 80mm (For Curved Spec) 300
Part No. Size CtN Qty
aP242 130mm(W) x 175mm(D) 100
32 2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall wiRe SPoRtS diSPlayS
Hat diSPlay aRm• Extends 250mm from wall with 75mm diameter wire
disc on top.
Part No. Finish CtN Qty
aP879 Chrome 50
weSteRN Hat aRm• For wide rimmed hats or motorcycle helmets.
SiNgle wiNe Bottle diSPlayeR• Holds single bottle of wine.
Part No. Finish CtN Qty
aP872 Chrome 50
Part No. Finish CtN Qty
aP889C Chrome 100
aP889B Black 100
wiRe CaP diSPlayeR• Wire cap holder.
• Holds up to 6 caps.
Part No. Finish CtN Qty
aP878 Chrome 100
Part No. Size Finish CtN Qty
aP881 270mm(D) x 200mm(H) Chrome 50
wiRe SHelF divideR• Use above shelves to divide into compartment.
• Ideal for Manchester, folded knitwear, etc.
Inspired Retail Concepts 33
SlatwallPeN CoNtaiNeRS
Part No. Finish CtN Qty
aP888C Chrome 50
SiNgle Ball HoldeR• 130mm diameter wire ring.
multi Ball HoldeR• Holds up to 3 soccer/footballs
• Provison for front label holder (order separately)
Part No. Finish CtN Qty
aP882 Chrome 50
veRtiCal PeN diSPlay• Slightly angled back to keep pens neat.
• Dimensions – 600mm(L) x 70mm(W) x 120mm(H)
• 8 compartment
HoRiZoNtal PeN diSPlay• 8 Compartment with easy access shortened dividers.
• Dimensions – 600mm(L) x 150mm(W) x 120mm(H)
Part No. length CtN Qty
aP318 600mm 10
Part No. length CtN Qty
aP317 600mm 10
34 2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall gReetiNg CaRd diSPlayS
liBRaRy BooK HoldeR• Beech angled shelf w/acrylic ends
• Shelf size - 120mm(D) x 240mm(H)
(Other lengths or finishes available).
Part No. length CtN Qty
aP345 300mm 4
gReetiNg CaRd RaCK - 4 tieR• New design supplied in component form.
• Assembles in minutes with strong aluminium rivets.
• End dimensions – 160mm(W) x 370mm(H)
gReetiNg CaRd RaCK - 3 tieR• New design supplied in component form.
• Assembles in minutes with strong aluminium rivets.
• End dimensions – 120mm(W) x 295mm(H)
Part No. length CtN Qty
aP304 350mm 10
aP310 600mm 10
aP311 900mm 10
Part No. length CtN Qty
aP309 350mm 10
aP313 600mm 10
aP314 900mm 10
alBum FRame diSPlay• Place brackets whenever you need the for any width book/
picture frame, etc.
• Extends 250mm from wall.
SiNgle ‘J’ CHaNNel• For books, videos, etc.
• Front Height – 75mm, back height – 90mm, depth of
channel – 50mm.
Part No. length CtN Qty
aP300 Left Hand Side 40
aP301 Right Hand Side 40
aP305 Centre 25
Part No. length CtN Qty
aP319 150mm 20
aP320 600mm 20
aP321 900mm 20
1 32
123
Inspired Retail Concepts 35
SlatwallmagaZiNe diSPlayS
BooK diSPlay SHelF• Angled shelf or books, videos, etc.
• Front Height – 30mm, back height – 175mm, depth of
channel – 75mm.
aCRyliC magaZiNe RaCKS• An ideal method of displaying large quantities of magazines
and booklets, these fabricated clear acrylic units can be used
in a single row or 2 or 3-tier units for a high-density display.
• Incorporates metal brackets that hold the units at an angle to
provide the best visual effect while preventing magazines from
curling over.
• Each row is 75mm deep x 250mm high
Single tier
aCRyliC magaZiNe RaCKS
double tier
aCRyliC magaZiNe RaCKS
triple tier
Part No. length CtN Qty
aP326 280mm 10
aP327 560mm 10
Part No. length overall Height
aP1286 600mm 250mm
aP1291 900mm 250mm
aP1295 1200mm 250mm
Part No. length overall Height
aP1287 600mm 375mm
aP1292 900mm 375mm
aP1296 1200mm 375mm
Part No. length overall Height
aP1289 600mm 500mm
aP1293 900mm 500mm
aP1297 1200mm 500mm
36 2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall BRoCHuRe HoldeRS
PoRtRait a6 SiNgle BRoCHuRe HoldeR• Includes slatwall clips.
• Height – 150mm
Part No. opening Size CtN Qty
aP469 110mm(W) x 32mm(D) 56
laNdSCaPe a6 SiNgle BRoCHuRe HoldeR• Includes slatwall clips
• Height - 80mm
Part No. opening Size CtN Qty
aP468 160mm(W) x 32mm(D) 80
dl 4-ComPaRtmeNt BRoCHuRe HoldeR• Includes slatwall clips.
• Height – 150mm
dl SiNgle BRoCHuRe HoldeR PoRtRait• Includes slatwall clips.
• Height – 150mm
Part No. opening Size CtN Qty
aP470 104mm(W) x 32mm(D) 100
Part No. opening Size CtN Qty
aP472 4 @ 104mm(W) x 32mm(D) 24
dl laNdSCaPe SiNgle BRoCHuRe HoldeR
Part No. opening Size CtN Qty
aP477 230mm(W) xxxmm(D) 24
Inspired Retail Concepts 37
SlatwallBRoCHuRe HoldeRS
aCRyliC iNFoRmatioN HoldeRS• Folded acrylic sandwich panel for single sheet information
display.
PlaStiC doCumeNt tRay• Injection-moulded office tray
• 310mm (L) x 225mm (W) X 45MM (H).
• Finish – Smoked / Tinted plastic
PlaStiC File / Catalogue HoldeR• Injection-moulded office tray
• Finish – Smoked / Tinted plastic
Part No. Size description
aP435 148mm(W) x 210mm(H) (A5 Portrait)
aP435l 210mm(W) x 148mm (H) A5 Landscape)
aP436 210mm(W) x 297mm(H) (A4 Portrait)
aP436l 297mm(W) x 210mm(H) (A4 Landscape)
aP437 297mm(W) x 420mm(H) (A3 Portrait)
aP437l 420mm (W)x 297mm(H) (A3 Landscape)
Part No. CtN Qty
aP340S 20
Part No. CtN Qty
aP344S 20
38 2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall BRoCHuRe HoldeRS
dl 3-ComPaRtmeNt BRoCHuRe HoldeR
a5 SiNgle BRoCHuRe HoldeR PoRtRait
a4 SiNgle BRoCHuRe HoldeR PoRtRait
a5 2-ComPaRtmeNt BRoCHuRe HoldeR
Part No. opening Size CtN Qty
aP454 3 @ 108mm(W) x 32mm(D) 36
Part No. opening Size CtN Qty
aP473 160mm(W) x 32mm(D) 88
Part No. opening Size CtN Qty
aP458 2 @ 162mm(W) x 32mm(D) 36
Part No. length CtN Qty
aP475 230mm(W) x 32mm(D) 44
a4 laNdSCaPe SiNgle BRoCHuRe HoldeR
Part No. opening Size CtN Qty
aP459 330mm(W) x 32mm(D) 36
Part No. CtN Qty
Inspired Retail Concepts 39
SlatwallBRoCHuRe HoldeRS
a4 3-ComPaRtmeNt BRoCHuRe HoldeR• Overall height - 500mm
Part No. opening Size CtN Qty
aP476 3 @ 230mm(W) x 32mm(D) 12
BRoCHuRe HoldeR BaCK SuPPoRt• Clips onto back of brochure holders so that brochures are
sloping back and cant curl forward.
• Also, can be used to convert wall units to free standing.
• Works on AP470, AP472, AP473 and AP475.
divideR• For converting A4 pockets into double DL holders.
CliP-oN HooK• For attaching extra holders in front of one another.
Part No. CtN Qty
aP1530 100
Part No. CtN Qty
aP1531 100
Part No. CtN Qty
aP1533 100
40 2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall diSPlay PaNelS
BaSe legS oN CaSteRSSlides on to aluminium frame of Double-Sided panel.
Include swivel casters (1 x braking & 1 x plain).
douBle-Sided PaNelS
Part No. length CtN Qty
aP4421 500mm 5 Pairs
Part No. Size
aP4450 600mm(W) x 1200mm(H)
aP4452 600mm(W) x 1400mm(H)
aP4454 1200mm(W) x 1200mm(H)
aP4455 800mm(W) x 1200mm(H)
aP4456 800mm(W) x 1400mm(H)
‘SyStemS 1’ – douBle-Sided PaNelSThe Systems One double-sided panels are an effective and
economical method of displaying your merchandise in a mobile
situation.
The single thickness 18mm panels are grooved on both sides and
framed in a rigid aluminium frame for maximum strength.
Metal legs simply slide onto the aluminium frame to
free-stand. Add a base and/or end panels according to your
merchandising requirements.
Order components individually according to your
requirements.
Standard panel colour – White. Other panel colours are
available to special order subject to minimum order
quantities.2
12
4
1 1
3 3
Inspired Retail Concepts 41
SlatwalldiSPlay PaNelS
melamiNe BaSe• Use to provide convenient base shelf or simply to cover the
legs.
• Select the length to suit double-sided panels.
diSPlay eNd PaNel• Single-sided grooved panels with small aluminium frame.
• Simply slides onto frame of the Double-Sided panel and
attaches to the base with metal brackets supplied.
Part No. length x width
aP4460 600mm(L) x 600mm(W)
aP4461 800mm(L) x 600mm(W)
aP4462 1200mm(L) x 600mm(W)
Part No. length
aP4465 600mm(W) x 1200mm(H)
aP4466 600mm(W) x 1400mm(H)
RevolviNg diSPlay PaNel• Convenient double-sided panel on circular revolving base.
• Panel size – 400mm(W) x 1300mm(H).
• Base dia. – 450mm
Available in WHITE only – other colours available subject to
minimum quantity of 10 units.
Part No.
aP4453
42 2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall goNdolaS
Heavy-duty douBle-Sided goNdolaSThe choice of display professionals and retailers requiring full merchandising capacity in a free-standing application.
Centre panels supported by aluminium frame on heavy-duty swivel casters concealed in a plinth base. (Units can be ordered without casters for use in
fixed positions).
Choose from a simple double-sided display or add end panels to provide maximum merchandising capacity. End panels can be at the end of the unit
or recessed to allow for a base shelf at the end.
Units can be supplied fully assemble for local delivery or supplied in flat-pack form for easy assembly at destination.
Available in all ADP standard colours and can be manufactured in any selected board finish.
• Basic unit includes the following:
• Melamine base shelf with plinth surround.
• Steel support structure underneath with heavy-duty casters (Available without
casters as an option).
• 2 x display panels for double-sided display.
• Anodized aluminium capping around display panels for a beautifully finished unit.
End panel on end - order separately with “Flush End” gondolas.
Flush End Panels simply clip onto the aluminium gondola capping of the centre panel and are supplied with
locating brackets to attach to the base.
End panel recessed (included with
order of “Extended End” gondolas)
Part No. Base designNo. end Panels
inclSlatwall
Panel lengthBase length Base width
Standard - 800mm wide
aP4015 Flush Both Ends 0 1200mm 1200mm 800mm
aP4015-1 Extended 1 End 1 1200mm 1580mm 800mm
aP4015-2 Extended Both Sides 2 1200mm 1960mm 800mm
aP4016 Flush Both Ends 0 1800mm 1800mm 800mm
aP4016-1 Extended 1 End 1 1800mm 2100mm 800mm
aP4017 Flush Both Ends 0 2400mm 2400mm 800mm
Narrow - 600mm wide
aP4035 Flush Both Ends 0 1200mm 1200mm 600mm
aP4035-1 Extended 1 End 1 1200mm 1580mm 600mm
aP4035-2 Extended Both Sides 2 1200mm 1960mm 600mm
aP4036 Flush Both Ends 0 1800mm 1800mm 600mm
aP4036-1 Extended 1 End 1 1800mm 2100mm 600mm
aP4037 Flush Both Ends 0 2400mm 2400mm 600mm
Narrow - 600mm wide
Part No. Base design width Height
aP4018 Suits Flush Ends Only 600mm 1200mm
aP4019 Suits Flush Ends Only 800mm 2400mm
Inspired Retail Concepts 43
SlatwalldiSPlay uNitS
each unit consists of: 2 x aP4017 (gondola)2 x aP4019 (end Panel)
each unit consists of: 1 x aP4035-2 (Narrow gondolawith inset end panels
44 2 0 1 9 C a t a l o g u e PHoNe: (08) 9411 0999 FRee Call: 1800 642 366
Slatwall diSPlay uNitS
Heavy-duty SiNgle-Sided goNdolaSBased on the same heavy-duty components of the Double-sided
units, these single-sided units allow for a free-standing display to go
against a wall or window to provide full merchandising capacity.
PiNwHeel goNdolaSThe ‘pinwheel’ design offers efficient merchandising capabilities
with display on all 4 sides with the protection of a base shelf.
Incorporates a top shelf for additional display.
Fully flat-packed for ease of transport – aluminium-framed panels
simply slide together.
Unit supplied on casters that are concealed in a plinth base.
(Available without casters by request).
RevolviNg SQuaRe toweRFlat pack design on lazy susan base. One side has bottom panel for
storage. Each side - 400mm (w) x 1600mm (h).
Shelf item
Base length
Base width
Base Height
Panel Height
end Panel width
Front Panel width
aP4030 900 900 160 1180 560 560
aP4031 1500 900 160 1180 560 1160
aP4032 2100 900 160 1180 560 1760
Base width – 1200mm
Base depth – 530mm
Base height – 130mm (casters not available for this unit)
Display panel height – 1170 or 1670mm
Overall height – 1300 or 1800mm
aP4013 1300mm
aP4014 1800mm
Tall single-sided
aP4078
Inspired Retail Concepts 45
SlatwalldiSPlay uNitS
RevolviNg StaNd witH BaSe StoRage4-sided PLANKWALL tower revolves on base cabinet.
Lockable base cabinet on casters with hinged door for secure
storage of excess stock.
TOP
Panel size – 340mm(W) x 950mm(H).
BASE CABINET
450mm square x 620mm high
Available in all ADP standard melamine colours.
aP4066
Inspired Retail Conceptswww.adpstore.com.au
CONTACT US TODAY: PERTH - Showroom & Warehouse 33 Tamara Drive, Cockburn Central, WA 6164 PO Box 5132, South Lake, WA 6164 P: (08) 9411 0999 F: (08) 9414 9484 National Freecall: 1800 642 366 E: [email protected]
ADELAIDE - Showroom & Warehouse 255 Richmond Road, Richmond, SA 5033
P: (08) 8351 9032 F: (08) 8351 9035 E: [email protected]
SYDNEY - Warehouse Only U44, 14 Loyalty Road, North Rocks, NSW 2151
P: 1800 642 366 E: [email protected]