¢ेğीय काया[लय, मुंबई द¢ण, 66/80, मुंबई समाचार माग[ , फोट[ , मुंबई -23 Regional office, Mumbai South, 66/80 Mumbai Samachar Marg, Fort, Mumbai-400 023 Ph.022-22629504 e-mail: [email protected]PLANNING & DEVELOPMENT DEPARTMENT, REGIONAL OFFICE, MUMBAI (SOUTH) 6 TH FLOOR, MUMBAI SAMACHAR MARG BUILDING, FORT, MUMBAI – 400 023 TEL.NO. (022) – 22629520/523 Tender for change flex only or change the flex alongwith frame if required or change entire signage with LED is to be used in the backlit board at all branches/ATMs/offices of RO Mumbai South Issue of tender : 16.03.2020 to 18.03.2020 Last date of submission : 18.03.2020 UPTO 3.00 PM. Tender opening : 18.03.2020 BY 3.30 PM Cost of tender : Rs. 500.00 EMD : NA Tenders can be collected from our web site/Govt Portal. On making application and enclosing documents, a. Vendors of signage’s board who are already working with Union Bank of India and having last work order after 01.01.2018 of any branch or empanelled vendor with Union bank of India is eligible. b. Having Average Annual Turnover more than Rs. 10.00 lakhs. c. Registered with PAN, GST. d. Assurance of 2 years Company warranty of 3M / LG/Avery Flex & Vinyl e. Certificate of distributor / converter of 3M / LG/Avery. f. Bio-data of the Company. The tenders will be issued only to the agencies who have submitted requisite documents to the satisfaction of the Bank. Upon filling, tenders are to be submitted to REGIONAL HEAD, UNION BANK OF INDIA, REGIONAL OFFICE, Mumbai South,6 th Floor, Mumbai Samachar Marg Building,Fort, Mumbai – 400 023.as per the above schedule. After expiry of due date, the tenders will not be accepted. Thanking you, Regional Head
TEL.NO. (022) – 22629520/523 Tender for change flex only or change the flex alongwith frame if required or change entire
signage with LED is to be used in the backlit board at all branches/ATMs/offices of RO Mumbai South
Issue of tender : 16.03.2020 to 18.03.2020 Last date of submission : 18.03.2020 UPTO 3.00 PM. Tender opening : 18.03.2020 BY 3.30 PM Cost of tender : Rs. 500.00 EMD : NA Tenders can be collected from our web site/Govt Portal. On making application and enclosing documents,
a. Vendors of signage’s board who are already working with Union Bank of India and having last work order after 01.01.2018 of any branch or empanelled vendor with Union bank of India is eligible.
b. Having Average Annual Turnover more than Rs. 10.00 lakhs. c. Registered with PAN, GST. d. Assurance of 2 years Company warranty of 3M / LG/Avery Flex & Vinyl e. Certificate of distributor / converter of 3M / LG/Avery. f. Bio-data of the Company.
The tenders will be issued only to the agencies who have submitted requisite documents to the satisfaction of the Bank. Upon filling, tenders are to be submitted to REGIONAL HEAD, UNION BANK OF INDIA, REGIONAL OFFICE, Mumbai South,6th Floor, Mumbai Samachar Marg Building,Fort, Mumbai – 400 023.as per the above schedule. After expiry of due date, the tenders will not be accepted. Thanking you,
TENDER NOTICE Subject: Tender for change flex only or change the flex alongwith frame, if required or change entire signage with LED is to be used in the backlit board at all branches/ATMs/offices of RO Mumbai South
Sealed item rate tenders are invited by M/s Union Bank of India, REGIONAL OFFICE, Mumbai South,6th Floor, Mumbai Samachar Marg Building,Fort, Mumbai – 400 023
1. The above work at all branches/ATMs/offices of RO Mumbai South will start at
the end of business hours on 31.03.2020 and same has completed on the night of 31.03.2020 itself.
2. The tenderers are required to complete form of tender, price the schedule of
quantities and sign each page of tender documents before submission. The completed set is to be enclosed in a sealed envelope addressed to:
UNION BANK OF INDIA
Regional Office, Mumbai South 6th Floor, Mumbai Samachar Marg Building
3. Tenders will be received upto 3.00 PM on 18.03.2020. 4. No tender will be received after the expiry of the time notified for receiving
tenders under any circumstances whatsoever.
5. The tender will be opened at 3.30 PM on 18.03.2020 at above address in the presence of authorized representative of contracting agency.
6. Tender shall remain valid for acceptance for a period of 90 days from the notified
last date of tender submission. 7. The Bank reserves the right to reject any or all tender received without assignment
of any reasons thereof.
8. The tender rate against each item of work / price indicated in the schedule of quantities and rates / price should be indicated both in words and figures. In case of any discrepancy, the rates indicated in words would prevail.
9. The rates quoted against each item of work / price should be for the complete
finished item of work and include all labour, material, taxes, overhead, duties,
I / We have read the instructions appended to the proforma and I / We understand
that if any false information is detected at a later date, any future contract made between ourselves and Union Bank of India, on the basis of the information given by me / us can be treated as invalid by the Bank and I / We will be solely responsible for the consequences.
I / We agree that the decision of Union Bank of India in selection of contractors will be
final and binding to me / us.
All the information furnished by me hereunder is correct to the best of my knowledge and belief.
I / We agree that I / we have no objection if enquiries are made about the work listed
by me / us in the accompanying sheets.
I / We agree that I / We have not applied in the name of sister concern for the subject empanelment process.
Place : SIGNATURE Date : NAME & DESIGNATION SEAL OF ORGANISATION
Tender for replacement of ONLY Front fascia of existing signage board with Back-lit
Flex printed with digital eco- solvent printing machine platform work at all branches/ATMs/offices of RO Mumbai South
Sr. No
Item Rate per sq.ft.# Rs.
1 2
Replacement of ONLY Front fascia of existing signage board with Back-lit Flex printed with digital eco- solvent printing machine platform work as per approved design and art work with following specification of Bank :
- Flex material: 3M/LG/AVERY(with 2 years Warranty) 3M- Lumina Flex LG- Hi Flex-II Avery- 4421-R Flex
Job doesn’t includes: 1. Replacement of electrical. 2. Cleaning of Board. 3. Any repairs of side Metal Panels or any metal structure.
Scaffolding charges: (above 12 ft from ground floor, [Size= length of board * height from ground level])
Tender for replacement of Back-lit Flex printed with digital eco- solvent printing
machine platform work along with frame at all branches/ATMs/offices of RO Mumbai South
Sr. No
Item Rate per sq.ft.# Rs.
1 2
Replacement of Back-lit Flex printed with digital eco- solvent printing machine platform work along with frame as per approved design and art work with following specification of Bank :
- Flex material: 3M/LG/AVERY(with 2 years Warranty) 3M- Lumina Flex LG- Hi Flex-II Avery- 4421-R Flex
- MS Pipe structure of 25 mm x 25 mm x 2 mm sq.pipe 3 in 1 process with anticorozion stoven paint on frame, covered with 24 or 26 ivory powder coated sheet. 1” x 1” 19 guage aluminum angle in the front side of the box for edge to edge light.
Scaffolding charges: (above 12 ft from ground floor, [Size= length of board * height from ground level])
Tender for replacement of signage board with Back-lit Flex printed with digital eco- solvent printing machine platform work along with LED at all branches/ATMs/offices
of RO Mumbai South Sr. No
Item Rate per sq.ft.# Rs.
1 2 3
Replacement of signage board with Back-lit Flex printed with digital eco- solvent printing machine platform work along with LED as per approved design and art work with following specification of Bank :
- Flex material: 3M/LG/AVERY(with 2 years warranty) 3M- Lumina Flex LG- Hi Flex-II Avery- 4421-R Flex
- MS Pipe structure of 25 mm x 25 mm x 2 mm sq.pipe 3 in 1 process with anticorozion stoven paint on frame, covered with 24 or 26 ivory powder coated sheet. 1” x 1” 19 guage aluminum angle in the front side of the box for edge to edge light.
- Specification of LED module are as under : 1. Glorifying LED module (white) 2. Minimum 2 years warranty
- 2 years company warranty of 3M / LG/Avery Flex - 2 years company warranty for LED Modules. - 1 year company warranty of SMPS. - 2 Years maintenance free
Scaffolding charges: (above 12 ft from ground floor, [Size= length of board * height from ground level]) Timer charges per timer( per unit)
