Date post: | 15-Jan-2016 |
Category: |
Documents |
Upload: | maria-de-jesus-soberanis-perez |
View: | 47 times |
Download: | 10 times |
DRAWING INDEX
PROJECT DESCRIPTION
TITLE
VICINITY MAP LOCATION MAP
Clemson UniversityStarbucks Coffee Company
ARCHITECTS PROJECT NO. 0816.01
This project is a renovation and refurbishment of an existing student union gaming lounge space, to be replaced with a Starbucks Brandretail food service venue. The extents of the work includes demolition of existing partitions, ceilings, flooring, furniture and interior wallfinishes and construction of new partitions, millwork, ceilings and installation of new finishes and equipment as shown on A/E drawings.MEP systems will be modified as required and shown on A/E construction drawings. The project is located on the first floor of the HarcombeUniversity Center.
TRUE
PROJECTdwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:2
0:57
PM
G-000
0816.01
DK
JP
05-25-2012
Starbucks Coffee Company
COVER
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
HARCOMBE DINNING HALLCLEMSON UNIVERSITY
GeneralG-000 COVERG-001 General InformationG-002 Scope of Work Plan
DemolitionD-100 Demolition PlanD-200 Demolition Ceiling Plan
ArchitecturalA-112 Floor PlanA-113 Penetration PlanA-114 FF and E PlanA-115 Casework PlanA-116 Reflected Ceiling PlanA-117 Floor Finish PlanA-119 Wall Finish PlanA-201 Exterior ElevationsA-211 Interior ElevationsA-212 Interior ElevationsA-501 Partition Types and Wall DetailsA-502 Ceiling DetailsA-503 Custom Seating DetailsA-504 Casework DetailsA-505 Casework DetailsA-506 Light Fixture DetailsA-601 SchedulesA-602 SchedulesA-801 Enlarged Electrical PlansA-802 Enlarged Plumbing Plans
MechanicalM-100 Mechanical Demo PlanM-101 Mechanical Floor PlanM-201 Mechanical Schedules and Details
PlumbingP-101 Plumbing PlanP-201 Schedules and Details
ElectricalE-100 Symbols and SchedulesE-101 Symbols and SchedulesE-201 Floor Plan - LightingE-301 Floor Plan - PowerE-401 Power Riser Diagram
no. description date
WOMEN
BOWLING ALLEY
MECH MEN
ELEV.
STEPUP
STAIR
STEPUP
COURTYARD
STEP
STAIR
UP
STOR COOLER
STEPUP
STAIRUP
STEP STEPUP
STEPUP
UP
RAM
P
STEPUP
STEPUP
ARCADE
STOR
BILLIARDS HALL
RAM
PU
P
DN
OFFICE
MECH
JAN
OFFICE OFFICE
ARCADESTOR
RECEPTION
MUNICIPAL
OFFICE OFFICE OFFICE
MENDOORS TO
SUB-BASEMENT
UNISEX
BREAK ROOM
STORAGE
STOR
OFFICE
CUBICLE
WOMEN
MECH ELEC
STEPUP
CUBICLECUBICLE
CUBICLECUBICLE
COUNTER
COUNTERSERVICESPARKING
COURT
OFFICE
CUBICLE CUBICLE CUBICLE
Owner:
Licensee:
Architect of Record:
MEP Engineer:
StarbucksDesign Manager:
StarbucksDevelopment Manager:
Rex GravesClemson University Dining &Vending Services CoordinatorG06 Sikes HallBox 345376Clemson, SC 29634-5376(864) 656-0761 phone
Jeffery HallARAMARKP.O. Drawer 429Clemson, SC 29633(864) 656-2110 phone(864) 656-2109 fax
Ken TiptonTipton Associates449 Westmoreland DriveBaton Rouge, LA 70806(225) 387-0101 phone(225) 387-0104 fax
Craig ChampionMcKnight Smith Ward GriffinEngineers, Inc.4223 South Blvd.Charlotte, NC 28209(704) 527-2112 phone
Eloisa BustosStarbucks Coffee Company95 Merrick Way, Suite 650Coral Gables, FL 33134(305) 529-5359 phone
Chuck HooverStarbucks Coffee Company1959 N. Peave Haven Road,Suite 316(336) 972-3022 phone(206) 903-2756 fax
3PL Third Party Logistics
A/C Air ConditioningACT Acoustical Ceiling TileADJ AdjustableAFF Above Finished FloorAMP AmpereARCH Architect
BOH Back of House
CAB CabinetCL Center LineCLG CeilingCM Construction ManagerCTR CenterCX CommissioningCXA Commissioning Agent
DEG DegreeDET DetailDIA DiameterDIM DimensionDM Design ManagerDN Down
EA EachEL ElevationEQ EqualEXIST ExistingEXT Exterior
FF&E "Furniture, Fixture, and Equipment"FIO Furnished and Installed by OwnerFLR FloorFOH Front of HouseFT Foot/Feet
G GroundGC General Contractor
HC Hollow CoreHDW HardwareHM Hollow MetalHORIZ HorizontalHR HourHT HeightHVAC "Heating, Ventilating, and Air Conditioning"
ID Inside Diameter
LL Landlord
MAX MaximumMEP "Mechanical, Electrical, and Plumbing"MFR ManufacturerMIN Minimum
NIC Not in ContractNL Night LightNTS Not to Scale
OC On CenterOD Outside DiameterOF/CI Owner Furnished/Contractor InstalledOF/OI Owner Furnished/Owner Installed
PD Production DesignerPLC PlacePM Project Manager
R RadiusRCM Renovations Construction ManagerREF ReferenceREQ(‘D) Require(d)REV RevisionRND Round
SB StarbucksSC Solid CoreSF Square FeetSHT SheetSIM SimilarSPEC SpecificationSQ Square
TEMP TemporaryTYP Typical
UON Unless Otherwise Noted
VD Vendor DirectVERT VerticalVIF Verify in Field
PXXX-ES
XXXXX
North Arrow
Exterior Elevation
Interior Elevation
Section Callout
Detail Callout
Paint Tag
Design ID Tag
Door/Window Tag
Revision Cloud
Revision Tag
X' XX"
Dimension Line fromFinish Face to Finish Face
Datum Point
X'-XX" AFF
X
Above Finished FloorHeight Tag (imperial)
XXXX AFF Above Finished FloorHeight Tag (metric)
XXXXX
1. All work shall be performed in strict compliance with local, county, state, and federal codesand ordinances.
2. General Contractor shall verify the location of all utilities.
3. General Contractor to verify all dimensions, including clearances required by other trades,and notify Starbucks Development Manager of any discrepancies prior to proceeding with thework. All dimensions are to the face of the finished surface unless noted otherwise. Alldimensions to be taken from designated datum point. Do not scale drawings.
4. General Contractor shall patch and repair all existing walls, floors, ceilings, or othersurfaces identified to remain that may become damaged during the course of the work.
5. The General Contractor is responsible for obtaining permits for fire protection, plumbing,mechanical, and electrical systems prior to installation of such systems.
6. Responsibility for supply and delivery of materials and equipment is identified in thedrawing schedule sheets under the column labeled "Responsibility".
7. For the purpose of the documents, to “install”, shall mean to provide all fasteners,miscellaneous hardware, blocking, electrical connections, plumbing connections, and otheritems required for a complete and operation installation, unless otherwise noted.
8. All item substitutions must be approved by the Starbucks Design Manager.
9. Refer to item cutsheets for additional information.
JURISDICTION CLEMSON UNIVERSITY HARCOMBE UNIVERSITY CENTERPICKENS COUNTYCLEMSON, SC
SOUTH CAROLINA DEPARTMENT OF LABOR, LICENSING, AND REGULATIONSYNERGY BUSINESS PARK; KINGSTREE BUILDING110 CENTERVIEW DR.COLUMBIA, SC 29210803.896.4300
CODE CRITERIA AS SET FORTH IS APPLICABLE AS ADOPTED AND/OR AMENDED BY NOTED JURISDICTION
APPLICABLE CODES
BUILDING CODE INTERNATIONAL BUILDING CODE 2009EXISTING CODE INTERNATIONAL EXISTING BUILDING CODE 2009
MECHANICAL CODE INTERNATIONAL MECHANICAL CODE 2009ELECTRICAL CODE NATIONAL ELECTRIC CODE 2009PLUMBING CODE INTERNATIONAL PLUMBING CODE 2009
GAS CODE INTERNATIONAL GAS CODE 2009FIRE CODE INTERNATIONAL FIRE CODE 2009ENERGY CODE COMMERCIAL ENERGY CODE
LIFE SAFETY CODE NFPA 101 LIFE SAFETY CODE 2009
ACCESSIBILITY CODE ADA ACCESSIBILITY GUIDELINES 1994
Harcombe Univeristy Center
1 (Plaza Deck Above)
1975
II-A Renovations to existing
1-HR
No
22,269 sf
3,096 sf14 % Total plate renovation
A-2
3,096 sf / 15 = 206
CODE CRITERIA
SITE:
TOTAL FLOORS:
BUILT:
CONSTRUCTION TYPE:
FIRE RATINGS:
SPRINKLERS:
TOTAL SF:
SCOPE OF WORK:
OCCUPANCY TYPE:
OCCUPANCY LOAD:
STARBUCKSLOCATION
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:2
1:01
PM
G-001
0816.01
DK
JP
05-25-2012
Starbucks Coffee Company
General Information
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Project ContactsAbbreviation List Symbol Legend
Licensee General Notes
Applicable Codes
Scale: 1/16" = 1'-0"
Key Plan - Harcombe University Center
no. description date
ADA KeyA. 30" x 48" clear for wheelchair access.
B. Barrier-free path of travel.
Scope of Work Summary1. Not Used.
2. Construct new wall(s) as indicated by hatch on Floor Plan.
3. Construct new soffits/ceilings as indicated on ReflectedCeiling Plan.
4. Install new flooring as indicated on Floor Finish Plan.
5. Install new casework items as indicated on Casework Plan.Casework installation by Starbucks.
6. Install new plumbing items as indicated on FF&E plan; RE:MEP.
7. Install new specialty equipment as indicated on FF&E plan;RE: MEP.
8. Install new auxiliary items as indicated on FF&E plan; RE:MEP.
9. Install new light fixtures as indicated on Reflected CeilingPlan. See Interior Elevations sheets for clarity.
10. Install new HVAC items as indicated on Reflected CeilingPlan.
11. Install new wall treatments as indicated on Wall Finish Plan.
12. Install new furniture as indicated on FF&E plan.
13. Install new graphics as indicated on Interior Elevation sheetsand Wall Finish Plan.
14. Patch, prime and paint walls, ceilings and/or soffits asindicated on Reflected Ceiling Plan and Interior Elevationsheets.
15. Install new door as indicated on Floor Plan.
16. New Storefront System as indicated on Floor Plan.
17. Install new signage as indicated on Exterior Elevations
18. Install new gate as indicated on Floor Plan.
19. Replace hardware at door as indicated on Door Schedule.
20. Install new vanity mirror centered over existing sink;"Reflection Mirror" by tiella
Men'sRestroom
Women'sRestroom Workroom
B B
B
BB
B
B
B
B
A
.7 5 8
3 4 9
10 11 14
3 4 9
11 12 13
10
14
AA
CafeSeating
AA
2
.5 6 7
BB
B
B
. .5 7
6
5
16
5 7
515
A
.5 7
.6 7 6
7 7 7
7
77 7
77 7
6
4 9
10 11 14
7 6
2 3
7
7
Bar
15
.5 6 7
16
OutdoorSeating
12 17
NIC NIC
2A-502
B
4 11
4 11 14
17
17
18
1919
20
20
3
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:2
1:36
PM
G-002
0816.01
DK
JP
05-25-2012
Starbucks Coffee Company
Scope of Work Plan
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Scale: 1/4" = 1'-0"1 Scope of Work Plan N 0 2' 4' 8'
Scale: 1/4" = 1'-0"
no. description date
1
1
NIC NIC
1
2
3
4
4
5
6
7
7 7
7
8
99
99
8
8
8
8
8 8
5
5
3
11
1111
10 10 10
12
12
Demolition Plan Notes1. Demolish existing walls as indicated.
2. Remove door and frame and discard.
3. Replace hardware at door per door schedule.
4. Remove cased opening and discard.
5. Remove floor finish and discard. Prepare slab toreceive new concrete topping. RE: Specs
6. Remove equipment and salvage to owner.
7. Remove furniture and salvage to owner.
8. Remove existing gaming equipment and salvageto owner.
9. Remove existing television and mountinghardware; salvage to owner.
10. Chair rail at storefront to be removed.
11. Prepare door and frame for new finish, asscheduled.
12. Area to be trenched. RE: Elec and Plumbing
Existing Column to Remain
Existing Wall to Remain
Material to be Demolished
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:1
9:59
PM
D-100
0816.01
DK
JP
05-25-2012
Starbucks Coffee Company
Demolition Plan
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Scale: 1/4" = 1'-0"1 Demolition Plan - 1st Floor N 0 2' 4' 8'
Scale: 1/4" = 1'-0"
Wall Legend - Demo Plan
no. description date
Armstrong is not licensed to provide professional architecture or engineering design services.
compliance with all Legal Requirements.advised to consult with a duly licensed architect or engineer in the particular locale of the installation to assure
the drawings for a particular installation or their fitness for a particular purpose.Armstrong does not warrant, and assumes no liability for the accuracy or completeness of
applicable for a particular installation.local building codes, laws, statutes, ordinances, rules and regulations (Legal Requirements) that may be
They are not a substitute for an architect's or engineer's plan and do not reflect the unique requirements ofThese drawings show typical conditions in which the Armstrong product depicted is installed.
The user isDATE:
DRAWN BY:
DWG. NO.
PROJECT NAME:
SCALE:
CHK BY:
PATH:
DESC.:
REV: DATE:
CEILING SYSTEMS * Phone: 877-ARMSTRONG
AXIOM-KNIFE EDGE PROFILE.
PROFILE08/08/08
MSS
.
4
1
NIC NIC
1 1 12
3
4
4 44
4
4
2
3
3
33
6
5
7' - 4" 5' - 0" 5' - 0" 5' - 0" 5' - 0" 5' - 0" 5' - 0" 5' - 0" 5' - 0" 5' - 0" 5' - 0" 5' - 0" 5' - 0" 5' - 0"
3' -
0"5'
- 0"
73
Demolition RCP Notes1. Remove existing rafter and chicken wire ceiling and discard.
2. Remove metal ceiling plate and discard. Framing and sofits toremain.
3. Existing hard ceilings to remain, patch and repair as necessary.
4. Remove light fixtures and discard.
5. Remove existing equipment and salvage to owner.
6. Ceiling fan to be removed.
7. Hard ceiling to be removed to structure above by owner prior to startof work; framing and supports to remain in place.
Wire Ceiling and Supports to be Demolished
Hard Ceiling to Remain
Hard Ceiling to be removed by Ownerprior to start of work
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:2
0:31
PM
D-200
0816.01
Author
Checker
05-25-2012
Starbucks Coffee Company
Demolition Ceiling Plan
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Scale: 1/4" = 1'-0"1 Demolition Ceiling Plan - 1st Floor N
0 2' 4' 8'
Scale: 1/4" = 1'-0"
RCP Demo Legend
no. description date
Floor Plan NotesA. General Contractor to verify all dimensions and notifyStarbucks Construction Manager of any discrepancies prior toconstruction. All dimensions to be taken from designateddatum point.
B. If existing exterior entrance threshold exceeds requiredAmerican’s with Disability Act (ADA) maximum allowable1/2" bevel or 1/4" step (total change of not more than 1/2"),remove and replace with accessible threshold. Raisedthresholds and floor level changes at accessible doorways tobe beveled with a slope no greater than 1:12.
C. General Contractor to provide fire treated wood studblocking, or equivalent to support any wall attachment and/orsignage.
D. All doors to provide 32” (900mm) minimum clear openingwhen opened to 90 degree position unless otherwise noted.
E. Verify all existing doors, hardware and frames meetStarbucks and/or code requirements.
F. Install 1/4" glass-mat water resistant backing board onbackbar wall per specification.
Sheet Notes1. Align both sides. Frame into existing wall.
2. New storefront to match existing storefront.
3. RE: X0055 / A-505
4. RE: X0021 / A-503
5. RE: X0024 / A-503
6. Tube steel wall support, RE: 5 / A-501
Existing Column
New Partial Height Wall
New Full Height Wall
Existing Wall
9' -
7 3/
4"
2' -
6 1/
2"
9' -
8"
14' - 1 1/2"
2' - 0 1/4"
7' -
0"6'
- 0"
7' -
0"2'
- 7
1/2"
CafeSeating
Workroom
Women'sRestroom
Men'sRestroom
1
4' -
7"16
' - 2
1/2
"
12' - 6 1/4" 1' - 7"
3' - 6" 18' - 2 1/2" 31' - 10"
2' - 0"
2' -
0"
9' -
7 3/
4"
9' -
4 3/
4"
13' - 7"
2' -
2 3/
4"2'
- 7
1/2"
2
2
4
5
Bar
1' -
7 1/
16"
12' -
8 3
/16"
6' - 4 3/16"
NIC NIC
A-5014
2
6
5
3
4
2 1
Existing Door to Remain;New removeable centermullion, new hinges, newclosers.
Existing Door to Remain
6
7
7
7
1
2
3
1
2
3
4
4
1
1
Glazing:T = Tempered
Frame:AL = Aluminum StorefrontHM4 = Hollow Metal No Rabbet
Construction:SC = Solid CoreWD = Wood
Door Legend:
Door Hardware Set No. 4 Workroom Door, @ BackbarCount Item Description Manufacturer Finish1 Easy Swing Hardware Eliason Door Packaged with Hardware Eliason Black Powder Coat
Door Hardware Set No. 5 Gate @ BackbarCount Item Description Manufacturer Finish1 SCP - Gate (hardware only) Easy-swing hinges & gate post Eliason Black Powder Coat
Type A
TT
Type B Type C
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:1
6:23
PM
A-112
0816.01
DK
JP
05-25-2012
Starbucks Coffee Company
Floor Plan
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Wall Legend - Floor Plan
Scale: 1/4" = 1'-0"1 Floor Plan N 0 2' 4' 8'
Scale: 1/4" = 1'-0"
Door Schedule
Design ID Count Description Width Height Finish Door TypeConstruction
TypeHardware
Group Frame Type Frame Material Responsibility CommentsGlazed Doors & Entrances
1 1 Aluminum - Double Storefront metal Frame 6' - 0" 7' - 11 1/2" Black A AL Existing Door to Remain; New removeablecenter mullion, new hinges, new closers.
2 1 Aluminum - Double Storefront metal Frame 5' - 11 1/2" 7' - 11 1/2" A AL Existing Door to Remain3 1 Aluminum - Double Storefront metal Frame 6' - 0" 7' - 11 1/2" A AL
Interior Doors4 1 Door - Single Impact Double Acting - 36in
915mm3' - 0" 7' - 2" WD0019 B SC 4 HM4 N/A GC
5 1 1" Thick Wood Gate - Single ImpactDouble Acting
3' - 0" 2' - 6" WD0019 C SC 5 N/A N/A GC Gate post system provided by Eliason. Customwood gate with planking finish per caseworkFinish Schedule. WD0019. Supplied byCasework Vendor
6 1 Door - Double Flush - 28in 710mm 2' - 4" 7' - 0" Paint Paint to match surrounding walls7 3 Door - Single Flush - 36in 915mm 3' - 0" 7' - 0" Paint Paint to match surrounding walls; 1" clear
undercut at restrooms
Door Type Legend
no. description date
Penetration Plan NotesA. All stub-up dimensions are relative to finished wall locations(shown as outlines on this plan). Refer to Construction Plan forwall placement.
B. Floor Sink: Refer to cut sheets for component specificationsand cutout requirements.
C. Waste Line Penetrations: Refer to Plumbing Plans forindividual line specifications.
D. Stub-up Penetrations: Refer to Plumbing Plans for individualstub-up specifications.
E. Toilet Floor Penetration: Refer to cut sheets for stub-uplocation relative to finished wall.
F. Penetration to be located on centerline of wall or as requiredper conditions.
G. Trenching outline for guideline use only. General Contractorto coordinate with specific trades and site conditions todetermine actual layout.
All conduitstub upsto be withinthis boundary
Dimensiondatum point
CWF stub up
CW stub up
0' - 7"
0' -
3"
Eq.Eq
.
HW stub up
All conduitstub upsto be withinthis boundary
Dimension datum point
Eq.
3/4" LAN conduitto POS / safe
3/4" isolated groundpower conduit
3/4" LAN conduit tomanager's station3/4" isolated groundpower conduit
1' - 9"
0' -
3"
Eq. All conduitstub upsto be withinthis boundary
Dimension datum point
Eq.
3/4" power conduitto electrical panel
1/2" phone to managersdesk
1/2" data to managersdesk
0' -
3"
1' - 6"
Eq.
3/4" power tofoodcase
3/4" power future
1/2" security tomanagers desk
Floor sink set flush with top finish floor
Caulk Joint
Existing concrete floor
No-Hub connection
3" Tail Piece
Grind concrete floor to drain
Slope downward to drainSlope
8' - 10 3/4" 5' - 10 1/4" 1' - 8"
A-1134
A-1133
A-1132
A-1132
A-1135 A-113
5
A-1135
A-1135
A-1135
10294
10294
10294
1' -
2 1/
2"
5' -
7 3/
4"11
' - 7
1/2
"
CafeSeating
WorkroomWomen'sRestroom
Men'sRestroom
34' - 8 1/2"
32' - 10" 10' - 9 3/4"
7' -
11 1
/2"
4 11/16" 6 1/8"
1029410294
Bar
4 1/
4"
5"
NIC NIC
8' -
3 3/
4"
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:1
6:29
PM
A-113
0816.01
DK
JP
05-25-2012
Starbucks Coffee Company
Penetration Plan
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Scale: 1 1/2" = 1'-0"2 Stub-Up @ FrontBarScale: 1 1/2" = 1'-0"3 Stub-Up @ FrontBar
Scale: 1 1/2" = 1'-0"4 Stub-Up @ POS/SafeScale: 3" = 1'-0"5 Floor Sink Detail
Scale: 1/4" = 1'-0"1 Penetration Plan N 0 2' 4' 8'
Scale: 1/4" = 1'-0"
no. description date
FF and E Plan NotesA. General Contractor to schedule with local refrigerationContractor to conduct initial food case start-up and testing. Forapproved Contractor, contact vendor.
B. The space is served by the municipal water and sewersystem unless otherwise noted.
C. All equipment and installation will meet National SanitationFoundation standards or equivalent.
D. Equipment units shall contain no exposed threads,embellishments or overhanging edges that serve as places foraccumulation of dust, dirt and debris.
E. Warming oven(s) shown for permitting purposes. Installationat store opening to be verified by Starbucks ConstructionRepresentative.
F. Each hand washing sink will have a single service towel andsoap dispenser, and all hand sinks to have a combination faucetor premixing faucet.
G. See sheet I-601 for schedules.
Sheet Notes1. See elevations for distribution of cup dispensers
2. Place fire extinguisher in workroom per fire inspector.
3 POS equipment specs & installation by licensee. Verifyequipment provided with licensee.
(8)(8)(6) 12303
X003312184
(6)(6)(6)
X0003(12)
X00101218412303 (2)
X00101218412303 (2)
X0008X0003 (4)
X00101218412303 (3)
(4)X0008X0003 X0003(10)
X0010
12303 (2)(2)(2)
(3)
X00101218412303
X0010121841230312184
X00101218412303
X0008X0003 (4)
11901
X0004 (3) (8)(8)(8)
X0001X0004
X0033 (8)(8)(8)
Workroom
CafeSeating
Women'sRestroom
Men'sRestroom
105971323810917 (2)
(2)
(2)
12694108551009110396
10153108741021511003
(4)(4)
(6)(6)
12618
10473
1034412508
1050510215
10527(2)
2
1
312023
11115
10797(2)(2)
(3)
X0006
X0005
X0002(2)
(2)
X0006(2)
X0002X0032
(2)
(3)
X00331218412303
(2)
10818 1081810818
12193X0011
X0011
1
11061(4)
1051312149(2)
1051312149(2)
1051312149(2)
1051312149(2)
1051312149(2)
1051312149(2)
1051312149(2)
X0009
X0009
1240712480
1058110597
1097710947
10501
1010210475
108551009110396
10495
10305
1054910152
1072410314
1091710452
10439 (2)11055 (2)107881075711737
10452
(2)
10967 11083
(2)
108551009110396
(2)
1022211070
1071910447
104161046210462
10416
10995
10698
10922
X00331218412303
1007610005
(4)
1216012149(2)
X00101218412303 (2)
NIC NIC
10838
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:1
6:52
PM
A-114
0816.01
DK
JP
05-25-2012
Starbucks Coffee Company
FF and E Plan
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Scale: 1/4" = 1'-0"1 Furniture, Fixtures and Equipment Plan N 0 2' 4' 8'
Scale: 1/4" = 1'-0"
no. description date
Casework Plan NotesA. General Contractor to notify Starbucks ConstructionManager immediately if a discrepancy exists betweencasework shop drawings, site dimensions, casework plan oractual casework fixtures. All dimensions to be taken fromdesignated datum point.
B. Starbucks Construction Manager to coordinate andschedule casework delivery date. General Contractor toconfirm casework delivery date with casework manufacturer 4weeks and 1 week prior to scheduled date of delivery.
C. Starbucks contracts directly with casework vendor tosupply casework listed in casework schedule, unlessotherwise noted.
D. Refer to casework installation manual provided bycasework vendor for complete installation instructions.
E. All casework base units shall be set on 1/4" (6mm) non-absorbent plastic shims provided by casework vendor.
F. See Wall Finish Plan for location, tagging, and finishschedules of applied wall treatments.
G. Install oven stainless steel countertop and base cabinet with1/2" (10mm) gap between adjacent countertops.
H. See Reflected Ceiling Plan for casework soffit locations.
J. See Schedule sheets for schedules
Sheet Notes1. Do not caulk trash rings to countertops.
Indicates Stainless Steel
Indicates Chair RailDesign ID: X0025
Indicates Wall PlankingDesign ID: X0027
Indicates Wall PlankingDesign ID: X0028
A
B
C
A-1152
12802
11155
X0029
(2)
11900
11915
11930
11971
11971
11972
11973
11993
1200712082
1209112100 (3)
X0017
1191212103
X0018
12128
X0023
01-01
ADD
MODIFIED
BRW 01-02
ESP 10-02
X0021(2)
(4)
X0022
CafeSeating
WorkroomWomen'sRestroom
Men'sRestroom
MO
DIF
IED
CBS
07-
01 X0030
12474
X0016
A
AA
A
A
AA
A
9' -
3 3/
4"
C C
B B
X0045 (3)
X0046
1193311942 11945
1209612080X0048
X00491208012098120141197112096
X0056
MODIFIED
POS 18-01
X0024
MODIFIED
BRW 07-02
3' -
0 5/
8"3'
- 0"
3' -
4"
X0047
MOD.
SCL 03-01 X0044X0053X0020
X0055
X0051
X0043X0054
X0052
13287
11994X0050
12775
WRM 02-01
(2)
10' - 0"
10"
12127
X0031
11957
1
1
NIC
A
NICA-504
7Sim
1197711977 11977 11977
11902
11977 11977
1284512845
12816 12816
(Below)
11959
0' - 3 1/4"
12845
1197712816 12816
11977 11977 X0034
3 1/4"12' - 6 3/8"
12845
11956
12845
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:1
6:59
PM
A-115
0816.01
DK
JP
05-25-2012
Starbucks Coffee Company
Casework Plan
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Casework Plan Legend
Scale: 1/4" = 1'-0"1 Casework Plan
N 0 2' 4' 8'
Scale: 1/4" = 1'-0"
Scale: 1/4" = 1'-0"2 Upper Casework Plan
no. description date
Reflected Ceiling Plan NotesA. If required by local code, General Contractor to provide semi-recessed sprinkler heads with polished chrome escutcheonscentered in Acoustical Ceiling Tile. If pendant heads arerequired in gypsum soffit over frontbar, conceal supply pipingwithin soffit. General Contractor to submit sprinkler layout toStarbucks' Construction Manager for approval prior toinstallation.
B. General Contractor to provide and locate sprinklers per localcodes. Contact Starbucks Construction Manager if design intentis affected.
C. Where acoustical ceiling meets wall, provide angle wallmolding for reveal. Match ceiling grid color when applicable.
D. Leave (10) additional retail ceiling tiles, to match retail ceilingpaint color, above the workroom ceiling at manager's desk forfuture use.
E. Provide grommet at all ceiling penetrations for fixtures orsupports.
F. Heating, Ventilating, and Air Conditioning (HVAC) shown fordesign intent only. Contact project manager if changed.
G. Diffusers and returns at backbar in Acoustical Ceiling Tile tobe centered in tile, painted to match adjacent finishes, typical.
H. Paint all HVAC ducts, HVAC diffusers, recessed speakersand light trim rings the same color as ceiling or soffit. Typicalthroughout retail portion of store.
I. Paint substitutions are not allowed. Use Starbucks' nationalaccount "color code" when ordering paints. See sheet I-602 forschedules.
J. Existing and new structure, ceiling, duct, conduit, piping, etc.to be painted out black in all locations visible to below. Anyequipment which may be affected by paint to be coordinatedwith architect and MEP and protected as necessary.
Sheet Notes1. Align
2. Not Used.
3. Paint ceiling prior to wood planking installation.
4. GC to paint recessed trim to match adjacent surfaces.
5. 2' x 2' Access panel in drywall. Coordinate location withMEP prior to fabrication.
6. 2' x 4' Access panel. Coordinate location with MEP anddetails with Architect prior to fabrication.
33' - 7 1/2"
2' -
3"
4' - 0"4' - 0" 4' - 0"
4' -
0"2'
- 8"
2' - 9 3/4" 4' - 0" 4' - 0" 4' - 0" 4' - 0" 4' - 0"4' - 0"
4' - 0"
2' - 8 1/2"
6' - 0" 6' - 0" 6' - 0" 6' - 0" 6' - 0" 6' - 0" 6' - 0" 6' - 0" 6' - 0" 6' - 0" 6' - 0" 6' - 0"
5' -
0"5'
- 0"
5' -
0"6'
- 0"
6' -
0"
6' -
0"6'
- 0"
5' -
0"
19' -
11
3/4"
2' -
3"2'
- 3"
2' -
3"
2' - 0 1/4" 2' - 0" 2' - 0" 2' - 0" 2' - 0" 2' - 0"
6' -
6"
3' -
4 1/
4"
9' -
7 3/
4"
1293412956
(4)(16)
11154 (8)
1324211458 (9)
(9)
1324411533 (3)
(3)
1324411533
(3)(3)
1324411533
(4)(4)
1324411533
(4)(4)
1324411533
(13)(13)
1324411533
(13)(13)
1324411533(13)
(13)
(4)(3)
(12)(12)
X0012(3)1324411533
(9)(9)
1324411533
(6)(6)
1324411533
(3)(3)
2' -
6"
5' - 0" 23' - 7 1/2" 5' - 0"
2' -
6"
2' - 0" 2' - 0" 2' - 0" 2' - 0" 2' - 0" 2' - 0" 2' - 0" 2' - 0" 2' - 0" 2' - 0" 2' - 0"
CafeSeating
Workroom
Women'sRestroom
Men'sRestroom
8'-0" AFF
8'-0" AFF
8'-0" AFF
P551-SG
P546-SG
8'-3" AFF
8'-0" AFF
8'-7" AFF
13257 (9)
114581324213257 (12)
1' - 4"
EQEQ
12871 (3)
EQ EQ
132441153312871
(2)(2)(2)
12871
12871
(3)
(3)
12871
12871
12871
12871
12871(13)
(13)
(13)
(4)
(4)
12871(9)
2' - 0" 2' - 0" EQEQ
(2)
13' - 4"
3' -
6"16
' - 9
"
4' - 0" 9' - 5 3/4"
(2)
12871(6)
1
1
GWB Ceiling
GWB Ceiling
8'-0" AFF
GWB Ceilingw/ Suspended Planking
P552-ES
8'-0" AFF
GWB Ceilingw/ Suspended Planking
P552-ES
GWB Ceiling
GWB Ceiling
GWB Ceiling
12906(16)
X0014 X0014(2) (3)
12893 (16)
8'-0" AFF
Suspended PlywoodPanels
13181
X0014
X0013 X0013X0013EQEQ
4' - 0" 8' - 0" 20' - 0" 8' - 0" 4' - 0" 8' - 0" 11' - 11"
1' - 10 13/16"
3' - 10" TYP.
7' -
0"
2' -
5 9/
16"
Bar
13' -
6"
4' -
0"
2' - 7 15/16"
X0057
X0058
X0057X0059
(3)
X0027X0027
4
4 4
3
3
X0060 (19)
10017
10017
10017
10017
10017
P551-ES
P551-ES
P551-ES
NIC NIC
13181
2A-502
1A-502
3
A-502
Sim
8'-6" AFF
GWB CeilingP551-ES
6
6 6
5
5
5
Existing hard ceiling to remain;patch with GWB to match existing after
completion of mech and elec work
4A-502
Exist. GWB CeilingP551-ES
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:1
7:13
PM
A-116
0816.01
DK
JP
05-25-2012
Starbucks Coffee Company
Reflected Ceiling Plan
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Scale: 1/4" = 1'-0"1 Reflected Ceiling Plan N 0 2' 4' 8'
Scale: 1/4" = 1'-0"
no. description date
Floor Finish Plan NotesA. Starbucks to supply retail floor tile and tile base. GeneralContractor to install. General Contractor to supply workroom tileand base and install. General Contractor to supply and installmortar, adhesive, and grout. General Contractor to inspect alltiles and reject damaged or substandard tiles prior toinstallation.
B. All tile and slate to be installed per Tile Council of Americastandards.
C. All flooring and base material to be installed according toStarbucks specifications.
D. Cabinet bases to be set after tile installation.
E. Align tile transitions on whole tiles as shown.
F. For carpet installation, refer to manufacturers' installationinstructions.
Sheet Notes1. Not Used.
2. Floor sink/floor drain location.
3. GC to infill score cuts in concrete with grout to matchconcrete.
Concrete Floor8'x8' score cut pattern
Tile Base - Black - 6x12Design ID: 11403A
Walk-Off MatDesign ID: 11158
Tile Base - Black - Cut to 6x2 per specsMatch Design ID: 11403B
CafeSeating
WorkroomWomen'sRestroom
Men'sRestroom
Tile - Base - Black -6x12in - 11403
Concrete Stain - DarkBrown
Concrete Stain - DarkBrown
A
AA
A
A
A A
A
B
AA
A
AA
A
A
A
A
A
A
A
A
A
A
A
A
A
B B B
A
2 2
22
2
Tile - Base - Black -6x12in - 11403
Tile - Base - Black -6x12in - 11403
Tile - Base - Black -6x12in - 11403
Concrete Stain - DarkBrown
Tile - Base - Black -6x12in - 11403
Concrete Stain - DarkBrown
6' - 2"
11158Walk off Mat
AA
Bar
B
A
A
AA
A
11289
11289
11289
3
A-501
1
A-501
2
A-504
2
A-501
A
NIC NIC
BB
A
BB
AA
B
A
AA
A
A
A
A
A
A
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:1
7:40
PM
A-117
0816.01
DK
JP
05-25-2012
Starbucks Coffee Company
Floor Finish Plan
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Floor Legend
Scale: 1/4" = 1'-0"1 Floor Finish Plan N 0 2' 4' 8'
Scale: 1/4" = 1'-0"
no. description date
Wall Finish Plan NotesA. Workroom to be finished per local code requirements.
B. Install clear corner guards as indicated. Mount at 6”(150mm) AFF. Back-paint with corresponding wall color.Adhere with clear silicone adhesive and #6 stainless steel ovalhead screws 3” (75mm) from ends, 12” (305mm) on center.Offset screws on either side by 1/2" (10mm) vertically. Cutcorner guards to fit below chair rail at applicable locations. Donot install corner guards above chair rail.
C. Install metal corner guards as indicated. Mount at 6”(150mm) AFF. Affix with #6 stainless steel oval head screws 3”(75mm) from ends, 12” (305mm) on center offset screws oneither side by 1/2" (10mm) vertically. To be installed in back ofhouse only.
D. Change of paint color allowed at inside corners only.
E. Refer to Interior Elevations for graphics locations.
F. Refer to Casework Finish Schedule for additional information
G. General Contractor to provide and install workroom wallfinishes.
Indicates full height backbar wall tileDesign ID: 12320
Indicates full height FRPDesign ID: 11428
A
B
Indicates Leather WainscotDesign ID: X0063C
Indicates Leather WainscotDesign ID: X0064D
Full Height Wall TileDesign ID: T00001E
A-201
1
A-211
5
A-211
1
3
2
A-211
7
A-212
3
6
A
A
AA A
B
B
B
B
CafeSeating
Workroom
Women'sRestroom
Men'sRestroom
4 5
4
A-211
8
A-212 2
A-211 8Sim
A
A-2012
Bar
CC
C
CC
C
C
C
C
C
C
C
D
NIC
C
NIC
E
E
E
E
E
E
E
E
E
E
C
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:1
8:01
PM
A-119
0816.01
DK
JP
05-25-2012
Starbucks Coffee Company
Wall Finish Plan
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Wall Treatment Key
Scale: 1/4" = 1'-0"1 Wall Finish Plan N 0 2' 4' 8'
Scale: 1/4" = 1'-0"
no. description date
Exterior Elevation NotesA. General Contractor to coordinate and schedule signageinstallation with the Signage Contractor providing a minimumscheduling notice of 4 weeks and shall confirm installationschedule with Signage Contractor 1 week prior to scheduleddate of installation. Starbucks Construction Manager toprovide General Contractor with Signage Contractor contactinformation.
B. General Contractor shall coordinate with ElectricalContractor to furnish and install electrical circuits including allconduit, wire, connections, and breaker at panel boardnecessary to serve Signage.
C. General Contractor to provide fire treated wood blocking, orequivalent to support Signage.
D. Signage Contractor shall verify size and location of any andall allowable monument or pole signage with landlord andprovide shop drawing(s) prior to fabrication to StarbucksDesigner for approval.
E. Signage Contractor to install signage in compliance withlocal codes ad obtain permit and landlord approval.
F. Signage Contractor to supply shop drawings to StarbucksConstruction Manager and to the General Contractor asneeded. General Contractor to notify Starbucks ConstructionManager immediately if shop drawings or installation is inconflict with Starbucks architectural drawings.
G. General Contractor to clean, patch and repair existingexterior as required.
H. See Schedule sheets for schedules
Sheet Notes1. Provide 3" high, 3/4" stroke width, acrylic store addresslettering in approved contrasting color, on or above storefrontdoor or in location approved by local AHJ standards.
1
4' -
10"
13181
STUDENT UNIONDISPLAY BOARD
13181 4' -
10"
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:1
8:06
PM
A-201
0816.01
DK
JP
05-25-2012
Starbucks Coffee Company
Exterior Elevations
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Scale: 1/4" = 1'-0"1 Exterior Elevation @ Storefront
Scale: 1/4" = 1'-0"2 Elevation @ Interior Storefront
no. description date
Interior Elevation Notes
Sheet Notes1. Attach menu hinge to top of cabinet to allow access tocabinet shelves behind, typical.
2. Apply FRP to all sides of chase interior behind cubbie.
3. Cup dispener(s) mounting order from left to right:- Grande Venti- Grande Venti- Tall Hot- Short Hot
4. Backbar wall tile runs behind warming station.
5. Paint wall prior to installing wood planking and/orplywood panels.
6. GC to add outlets to front "kick plate" centered at eachtable.
A. Change of paint color allowed at inside corners only.
B. Refer to manufacturers' instructions shipped with artworkfor installation instructions and spacing.
C. Install wall cabinets before backbar wall tile. Run backbarwall tile to underside of wall cabinets, not behind cabinets.
D. Paint substitutions are not allowed. Use Starbucks'national account "color code" when ordering paints.
E. Paint finishes shall be applied as follows, unless otherwisenoted;
- All wood and metal surfaces shall be paintedSemigloss, or equal.- All accent and trim paint to be Semigloss, or equal.- All wall and ceiling paints to be Eggshell, or equal.
F. See Schedule sheets for schedules
CBS 07-01
MODIFIED
12860 12976
3
11
4
BRW 05-02
MODIFIED
Tile - Mottled DarkBrown - 2x8in - 12320
Tile - Base - Black -6x12in - 11403
Tile - Base - Black -6x12in - 11403
Tile - Mottled DarkBrown - 2x8in - 12320
01-01
ADD
BRW 05-02
MODIFIEDWRM 02-01
P552-ES
X0064
3' -
4 1/
2"
X0025
Tile - Mottled DarkBrown - 2x8in - 12320 ?
Open
Tile - Base - Black -6x12in - 11403
P546-SG
NEW FOODCASE MODIFIED POS 18-01 ESP 10-02
Open
Tile - Base - Black -6x12in - 11403
Open
SCL 03-01
MOD
P546-SG
5' -
3"
NEW FOODCASEMODIFIED POS 18-01ESP 10-02
OpenOpen
3
SCL 03-01
MOD
Wood Planking - 1x6 -10'-0" Bd cut to fit
9' - 7 3/4"
P552-ES
X0027
5
Open
Tile - Base - Black -6x12in - 11403
Tile - Base - Black -6x12in - 11403
P546-SG
X0064
SW6272
EQEQEQEQ X0038 X0039 X0040 X0041
4' - 6" 4' - 6" 4' - 6" 4' - 6"
3' -
6"
3' -
6"
3' -
6"
3' -
6"
6' -
0"
6
4A-502
P546-SG
Tile - Base - Black -6x12in - 11403
New Gate
P552-ES
Tile - Base - Black -6x12in - 11403
X0025
X0063
3' -
0"
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:1
8:24
PM
A-211
0816.01
DK
JP
05-25-2012
Starbucks Coffee Company
Interior Elevations
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Scale: 3/8" = 1'-0"1 Elevation @ BackbarScale: 3/8" = 1'-0"2 Elevation @ Sidebar
Scale: 3/8" = 1'-0"5 Elevation @ Frontbar (Customer Side)
Scale: 3/8" = 1'-0"3 Elevation @ Frontbar (Partner Side)
Scale: 3/8" = 1'-0"6 Elevation @ Side Nook
Scale: 3/8" = 1'-0"7 Elevation @ Banquette Seating
Scale: 3/8" = 1'-0"4 Elevation @ Side Bar
Scale: 3/8" = 1'-0"8 Elevation @ Back Hall
no. description date
Interior Elevation Notes
Sheet Notes1. Not Used.
2. Not Used.
3. Not Used.
4. Not Used.
5. Paint wall/ceiling prior to installing wood planking.
6. GC to add outlets to front "kick plate" centered at eachtable
A. Change of paint color allowed at inside corners only.
B. Refer to manufacturers' instructions shipped with artworkfor installation instructions and spacing.
C. Install wall cabinets before backbar wall tile. Run backbarwall tile to underside of wall cabinets, not behind cabinets.
D. Paint substitutions are not allowed. Use Starbucks'national account "color code" when ordering paints.
E. Paint finishes shall be applied as follows, unless otherwisenoted;
- All wood and metal surfaces shall be paintedSemigloss, or equal.- All accent and trim paint to be Semigloss, or equal.- All wall and ceiling paints to be Eggshell, or equal.
F. See Schedule sheets for schedules
SW6272
X0036 X0035 X0037
4' -
0"
3' - 0" 6' - 0" 3' - 0"
4' -
0"
4' -
0"
5' -
8" 8' -
0"
6
EQ EQ EQ
P552-ES
Wood Planking - 1x6 -10'-0" Bd cut to fit
P552-ES5
X0025
13181
X0063 X0063
4' -
10"
Tile - Base - Black -6x12in - 11403
Tile - Base - Black -6x12in - 11403
Wood Planking - 1x6 -10'-0" Bd cut to fit
X0027
X0025
X0025
3' -
0"
P552-ES 5
X0042
13' - 6"
6
X0063
X0063
7' -
6"
6' -
8"
Wood Planking - 1x6 -10'-0" Bd cut to fit
X0027
P552-ES5
P546-SG
OPEN
Tile - Base - Black -6x12in - 11403
3' -
0 3/
4"
6
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:1
8:33
PM
A-212
0816.01
DK
JP
05-25-2012
Starbucks Coffee Company
Interior Elevations
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Scale: 3/8" = 1'-0"3 Elevation @ Banquette Rear Wall
Scale: 3/8" = 1'-0"2 Elevation @ Storefront
Scale: 3/8" = 1'-0"4 Elevation @ Back Wall
Scale: 3/8" = 1'-0"5 Elevation @ Bar Entry
no. description date
Fiberglass reinforced plastic
Finish panelDie wall
Bullnose sanitary integralcoved tile base
Existing concrete slab
New 3/8" concrete topping
New integral bullnose sanitary3/8" cove tile base
Existing concrete slab
Existing wallboard
5 1/
2"
New tile backer board
New 3/8" concrete topping
Backer rod and sealant,typ at all floor joints
Existing stud framing
Storefront door and threshold
New or existingwalk off mat
Waterproof membrane,(only if on wood subfloor)
3/8" (10mm) metal edge orsimilar for design intent.Slide metal leg under mat.Clip leg edge as needed to fita curve.
Rubber Reducertransition strip
concrete
Anchor stud to existing concrete column
Backer rod and sealant,both sides, typ.6" metal stud
Blocking as required forstorefrontDrywall corner bead,both sides, typ.
New storefront systemwith high sidelight baseto match existing, perspecs
Leave 1" gap at existing,exterior glazing
2' - 0"
5' -
0" .
5x7x3/8 STEEL ANGLE3/4" DIA. EXPANSION
ANCHOR WITH WASHER AT6" O.C.; EPOXY SET INTO
EXISTING FLOOR SLAB
HSS 5x5x3/8 STEEL TUBESUPPORT
SECURE WALL STUDFRAMING WITH 1/2" THRU
BOLT @ 12" O.C.
CONTINUOUS WELD
4x4x1/4 STEEL ANGLEBRACE AT 45 DEGREES;
BOLT BOTH SIDES
CONTINUOUS WELD
New integral bullnose sanitarycove tile base as scheduled
Existing concrete slab
New tile backer boardmechanically fastened toexisting CMU wall
New 3/8" concrete topping
Backer rod and sealant,typ at all floor joints
Existing CMU wall
New wall tile as scheduled
New integral bullnose sanitary3/8" cove tile base
Existing concrete slab
5/8" Gypsum wallboard with finish asscheduled, both sides; 5/8" tilebacker board at wall tile; RE: 1/A-119
5 1/
2"
Tile backer board 5 1/2" TYP;Full Height @ Bar RE: 1/A-119
New 3/8" concrete topping
Backer rod and sealant,typ at all floor joints
6" metal stud framing
Continuous metal runneranchored to floor
HSS 5X5X3/8 steel tube supportRE: 5/A-501
Metal Stud Track; Fasten @2'0" O.C. MAX.
Existing ceiling to remain;Frame to deck above wherethere is no existing ceiling
Full height FRP as required; RE:1/A-119
New integral bullnose sanitary3/8" cove tile base
Existing concrete slab
5/8" Gypsum wallboard withfinish as scheduled, bothsides; FRP one side @Workroom RE: 1/A-119
5 1/
2"
5/8" Tile backer board
New 3/8" concrete topping
Backer rod and sealant,typ at all floor joints
3 5/8" metal stud framing
Continuous metal runneranchored to floor
Metal Stud Track; Fasten @2'0" O.C. MAX.
Existing ceiling to remain;Frame to deck above wherethere is no existing ceiling
New integral bullnose sanitary3/8" cove tile base
Existing concrete slab
Full height tile backerboard, one side
New 3/8" concrete topping
Backer rod and sealant,typ at all floor joints
1 3/4" metal stud framing
Continuous metal runneranchored to floor
Metal Stud Track; Fasten @2'0" O.C. MAX.
Existing ceiling to remain;Frame to deck above wherethere is no existing ceiling
Existing concrete slab
New 3/8" concrete topping
6" metal stud framing
Storefront system anchoredto slab. RE: Specs
Double wood 2x6 stud header
Storefront sill mullion.RE: Specs
Storefront system glazing
Storefront top mullionRE: Specs
5/8" Gypsum wallboard with finishas scheduled, both sides
Metal Stud Track; Fasten @2'0" O.C. MAX.
Anchor to concrete beam;expansion anchor set in epoxy
existing concrete beam
Metal Stud Track; Fasten @2'0" O.C. MAX.
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:1
8:39
PM
A-501
0816.01
Author
Checker
05-25-2012
Starbucks Coffee Company
Partition Types and WallDetails
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Scale: 3" = 1'-0"1 Integral Tile Base @Die WallScale: 3" = 1'-0"2 Integral Tile Base @ Existing Interior Wall
Scale: 3" = 1'-0"3 Transition - Concrete to Walk off Mat
Scale: 1 1/2" = 1'-0"4 Exterior/Interior Storefront Interface
Scale: 1" = 1'-0"5 STEEL TUBE SUPPORT - AXONScale: 3" = 1'-0"6 Integral Tile Base @ Existing CMU Wall
Scale: 3" = 1'-0"7 Partition - Type 1Scale: 3" = 1'-0"8 Partition - Type2
Scale: 3" = 1'-0"9 Partition - Type 3Scale: 3" = 1'-0"10 Partition Type - 4
no. description date
Wall/Ceiling Plank Lighting Section
0' - 0 1/2" 0' - 0 1/2"
0' - 6" 0' - 6"
Cleat centered on Wood Plank
Continuous LED lighting
V.I.F.
9' - 8"
0' - 6" 3' - 0" 3' - 0" 2' - 11"0' - 1 1/2"
0' - 1 1/4"
9' - 6"
0' - 0 3/4"
Ceiling Planks Section
0' -
6"0'
- 6"
Ceiling Planks Plan - Typical 6" spacing
Continuous BlockingTypical at cleat location
French Cleatspaced every 3'-0"
Wood trim glued and pin nailedto anchor blocking
Allow spacing for LED lighting on both sides of cleatrunning entire length of wood planking
Attach anchor blocking to soffit framing
Align wood trim w/ face of soffit
1x6 Wood Planks, finish per casework finish schedule
1x6 Wood Planks, finish per casework finish schedule
BOTTOM OF PLANK8'-0"
1' - 0" EQ EQ 1' - 0"
3' - 10"
1' -
0"EQ
EQ1'
- 0"
EQ EQ
Plan
Section
Custom Suspended Plywood PanelingTypical spacing: 4'-0" O.C.
Unistrut P1000 w/ 5/8" threaded rodsupport to structure above
Carriage bolt thru unistrut
7' -
0"
BOTTOM OF PANEL8'-0" A.F.F.
3/4" Thick Lamlite Panelwith Walnut veneer
Existing mechanical ductbeyond
Box beam supports at 16" O.C.attached to thread rod
Suspended light fixtureRE: 3/A-506
5 13/16" Extruded Aluminumtrim panel
5/8" Gyp board ceiling
MIN
6"
4"1'
- 0"
6' - 8" AFF
8' - 0" AFF
Existing mechanical duct
Existing hard ceiling to remain
Box beam framing to span existing ceiling
Thread rod from box beam toexisting structural deck above
3 1/2" metal stud framingsystem with studs at 16" O.C.in each direction; frame toavoid fixtures; box beams asnecessary to span belowexisting hard ceiling to remain
5/8" All thread rod with steelanchor plate at each box beam
Existing structural slabExisting mechanical duct beyond
Existing hard ceiling and framing
5/8" Gyp board6" Metal wall stud5/8" Gyp board ceiling
Gyp ceiling @ bar bulkhead
Recessed can light fixtures
Gyp board; maintain 1'-0" clear tostructural deck above
3 1/2" metal stud framing systemwith studs at 16" O.C. in each
direction; frame to avoid fixtures; boxbeams as necessary to span below
existing hard ceiling to remain
2' -
7"
Mounted track lighting
8' - 0" AFF8' - 3" AFF
1' -
0"
8' - 7" AFF
Gyp ceiling to match existinghard ceiling depth
New mechanical fan; support fromstructural deck above
Stud Kickers at 32" O.C.
Frame stud beams to existingCMU wall
Gyp board ceiling
4" steel box beams at 16" O.C.;continuous studs, full length
11' - 5 1/2"
5/8" all-thread rod to structureabove; secure to beams withsteel anchor plate
Existing duct to remain
Section of existing ceilingremoved prior to start of work;See sheet D-200
Stud framing to structureabove at 16" O.C.
Wood plank ceiling treatment;See 3/ A-502
4" steel studs at 16" O.C.
Existing ceiling to remain
8' - 2 1/4" AFF8' - 0" AFF
1' -
0"
Continue gyp 1'-0" at wall
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:1
8:46
PM
A-502
0816.01
Author
Checker
05-25-2012
Starbucks Coffee Company
Ceiling Details
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Scale: 3" = 1'-0"
Ceiling Plank Lighting DetailScale: 3/4" = 1'-0"3 X0027 10' Nook Ceiling Planking Detail
Scale: 3/4" = 1'-0"
X0060 Custom Plywood Ceiling Panels
Scale: 1 1/2" = 1'-0"2 Suspended Ceiling Panel Detail
Scale: 1 1/2" = 1'-0"1 Ceiling Bulkhead @ Bar Detail
4 5
no. description date
Scale: 1 1/2" = 1'-0"4 Ceiling Framing @ LED Plank
2' - 7"
2' - 8 1/2"
0' -
4"1'
- 1
1/2"
1' -
9 1/
2"
3' -
3"
V.I.F.
8' - 4 3/4"
2' -
8 1/
2"
V.I.F
.
0' -
9 1/
2"
PLAN
SIDE ELEVATION
V.I.F.
4' - 7" 0' - 3 1/2" 1' - 7 1/4"
Custom U-Shape Settee based on Design ID 12844
GC to add outlets to front "kick plate"centered at each table
Corian Top CapSee I-504/7
1' - 7 1/2" 0' - 3 1/2"
V.I.F.
3' - 2"V.I.F.
5' - 1"
1' -
7 1/
2"
0' -
3 1/
2"
V.I.F
.
0' -
9 1/
2"
0' - 1 1/2"1' - 7" 0' - 2 1/2"
1' - 11"
V.I.F.
0' - 9 1/2"
V.I.F.
2' - 8 1/2"
1' -
5 1/
2"1'
- 9
1/2"
PLAN
LEFT ELEVATION
Custom L-Shape Settee based on Design ID 12844
GC to add outlets to front "kick plate"centered at each table
Corian Top CapSee I-504/8
PLAN
FRONT ELEVATION
Custom Banquette based on Design ID 12844
0' -
6"1'
- 0"
1' -
6"
0' - 7" 1' - 8 1/4"
V.I.F.
13' - 10" 1' - 8 1/4" 0' - 7"
V.I.F
.
9' -
8"
V.I.F
.
8' -
4"
GC to add outlets to front of "kick plate"of Banquette centered at each table
13' - 8"
0' -
8"1'
- 6"
1' -
6"
3' -
5"
0' - 5" 1' - 8" 0' - 7"0' - 7"
Custom Bar-Height Banquette based on Design ID 128441' - 0"
UpholsteredBack andSeat
8x8 Steel Platesecured to floorw/(4) 3/8" Dia. HiltiExpansion anchors.
GC to add outlets tofront "kick plate"centered at each table
CaseworkManufacturer to buildstep for banquette tosit on. Wood to matchbanquette.
0' -
0 1/
2"0'
- 1
3/4"
3' -
2"
0' - 1 1/2"
Metal base finish MT0011
0' -
8"
0' - 8"
0' - 0 3/4"
0' -
0 3/
4"
2" Dia. Steel Pipe
0' - 3 1/4"
Finish Panel at side
Custom Upper Cubby end piecebased on Design ID 11959
11' - 0"
3' -
6"2'
- 5"
0' -
6"2'
- 6"
0' -
6"
0' - 6" 10' - 0" 0' - 6"
4" x 4" Tube Steel Column, Typ. Solid Reclaimed Walnut top - Live Edge
1" x 3" steel angle apron, typ.
0' -
2"2'
- 3"
4" x 4" tube steel column, typ.
Wood top, solid reclaimed Walnut top - Live Edge
Custom Community Table Plan
Custom Community Table Elevation
0' - 6" 10' - 0" 0' - 6"
11' - 0"
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:1
8:52
PM
A-503
0816.01
Author
Checker
05-25-2012
Starbucks Coffee Company
Custom Seating Details
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Scale: 3/4" = 1'-0"
X0021 Custom U-Shape SetteeScale: 3/4" = 1'-0"
X0024 Custom L-Shape Settee
Scale: 3/4" = 1'-0"
X0022 Custom Banquette
Scale: 3/4" = 1'-0"
X0023 Custom High Banquette
6
Scale: 3/4" = 1'-0"
X0001 Custom Bar Height Table BaseScale: 3/4" = 1'-0"
X0034 Upper Cubby End Piece
Scale: 3/4" = 1'-0"
X0003 Custom Community Table
12
3
45
7
no. description date
5' -
0"5'
- 0"
10' -
0"
Custom POS Counter to based on Design ID 12788Dimensions for modified items only
Corian counter tomatch profile standardcorian counter tops
Custom POS cabinet based on Design ID 12086Dimensions for modified items only
Plan
Elevation
V.I.F.1 1/2" Filler
3' - 7 1/2"
3' - 9"
Add third drawer to matchand extend shelving
3' - 9"
Custom POS cabinet based on Design ID 11990Dimensions for modified items only
Plan
Elevation Add third drawer to matchand extend shelving
3' - 7 1/2" V.I.F.1 1/2" Filler
3' - 9"
3' - 9"
Custom POS front Panel based on Design ID 11951Dimensions for modified items only
Plan
3' - 9"
10"
10' - 0"
Custom Queue Top cap based on Design ID 12758Dimensions of modified items onlyLive edge - 2 sides - see casework finish schedule
V.I.F
.
4' -
7"
1' - 7"
Short Wall Cap Plan
Custom Wall Top Cap based on Design ID 12758Dimensions for modified items onlySee casework finish schedule
V.I.F
.
6' -
4 1/
4"
1' - 7"
Long Wall Cap Plan
Custom Wall Top Cap based on Design ID 12758Dimensions for modified items onlySee casework finish schedule
1' -
5 5/
16"
1' -
7 1/
4"5"
2' -
1"5"
1' -
7 1/
4"1'
- 7
1/4"
4"
10' -
0"
Custom POS Toe KickBased on Design ID 11916Dimensions for modified items only
Customer side of casework
Adjustable stainless steel leg
Clip-on wood base panel.Attach to stainless steel legsat customer side of cabinetonly.
Wall Planks Plan
0' -
6"0'
- 6"
Wall Planks Section - Typical 6" Vertical Spacting
1x6 Wood Planks, finish per casework finish schedule Continuous LED Lighting
French Cleat at each board
4' - 0" 1' - 0" 4' - 0"
French cleats to attach planks to wall
LED lighting on underside of each french cleat,Wall/Ceiling Plank Lighting Section
0' - 0 1/2" 0' - 0 1/2"
0' - 6" 0' - 6"
Cleat centered on Wood Plank
Continuous LED lighting
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:1
9:05
PM
A-504
0816.01
Author
Checker
05-25-2012
Starbucks Coffee Company
Casework Details
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Scale: 3/4" = 1'-0"
X0052 Custom POS CountertopScale: 3/4" = 1'-0"
X0050 Custom POS CabinetScale: 3/4" = 1'-0"
X0051 Custom POS Cabinet
Scale: 3/4" = 1'-0"
X0054 Custom POS Panel
Scale: 3/4" = 1'-0"
X0016 Queue Top CapScale: 3/4" = 1'-0"
X0046 Partial Wall Top CapScale: 3/4" = 1'-0"
X0047 Partial Wall Top Cap
1
5 3Scale: 3/4" = 1'-0"
X0043 Custom POS Toe Kick4
Scale: 3" = 1'-0"2 POS Toe Kick
Scale: 3/4" = 1'-0"7 X0027 10' Nook Wall Planking DetailScale: 3" = 1'-0"
Wall Plank Lighting Detail
6
8
91011
1
no. description date
7' -
0 1/
2"
5' - 7"
1' - 4 1/4" 0' - 8 1/4"
0' -
1 3/
4"0'
- 11
1/4
"
Custom CBS Counter TopBased on Design ID 11886Dimensions for modified items only
7' -
3 3/
4"
1' - 4"
Custom CBS PanelBased on Design ID 11912Dimensions for modified items only
1' - 3"0' - 0 3/4"
7' -
2"
Custom CBS DiewallBased on Design ID 12128Dimensions for modified items only
Plan
1' - 0 1/2"
6' -
11 3
/4"
Custom Sit-Here BarBased on Design ID 12802Dimensions for modified items only
Live Edge
Custom Sit -Here Sneeze GuardBased on Design ID 11993Dimensions for modified items only
7' -
1"
2' -
4 1/
4"1/
8"2'
- 4
1/4"
1/8"
2' -
4 1/
4"
3' -
6"
Custom BRW counter based on Deisgn ID 12776Dimensions shown for modified items only
Return backsplash at adjacent wall
Custom BRW counter based on Design ID 12776Dimensions shown for modified items only
Return backsplash at adjacent wall
7' -
0 1/
4"
10 1
/4"
1' -
0 1/
2"10
1/8
"9
3/4"
Custom countertop/top cap based on Design ID 11992Dimensions for modified items only
3' -
4"3'
- 0"
8 1/
2"2'
- 8"
7 1/2" 1' - 3 3/4"
7 1/2"
9' -
8 1/
2"
Stone counter to match profile ofstandard corian counter tops.
2' -
11 1
/2"
Custom Cabinet based on Design ID 11985Dimensions for modified items only.
Front ElevationCustom Partial Finish Wall Panel based on Design ID 11907Dimensions for modified items onlySee Casework finish schedule
3' - 4"
V.I.F.
3' - 0" 3' - 1 1/2"
V.I.F
.
6 5/
8"2'
- 5"
6"Finished Floor
3' - 4" 3' - 0" 3' - 1 1/2"
36" GatePlan
Elevation
1' - 5"
Custom Toe KickBased on Design ID 11970Dimensions for modified items only
Plan
Finished Floor
Plan
Elevation
6"2'
- 5"
1' - 4 1/4"
1' - 4 1/4"
Custom Panel based on Desigh ID 11907Dimensions for modified items onlySee Casework finish schedule
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:1
9:10
PM
A-505
0816.01
Author
Checker
05-25-2012
Starbucks Coffee Company
Casework Details
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Scale: 3/4" = 1'-0"
X0029 Custom CBS CounterTopScale: 3/4" = 1'-0"
X0017 Custom CBS PanelScale: 3/4" = 1'-0"
X0018 Custom CBS Diewall1 2 3 4 5 6
7
Scale: 3/4" = 1'-0"
X0030 Custom Sit-Here
8 12
Scale: 3/4" = 1'-0"
X0031 Custom Sneeze GuardScale: 3/4" = 1'-0"
X0048 Custom BRW Countertop
Scale: 3/4" = 1'-0"
X0049 Custom BRW CounterScale: 3/4" = 1'-0"
X0044 Custom CountertopScale: 3/4" = 1'-0"
X0056 Custom CabinetScale: 3/4" = 1'-0"
X0055 Custom Partial Wall Wood Cladding
Scale: 3/4" = 1'-0"
X0020 Custom Toe Kick
Scale: 3/4" = 1'-0"
X0053 Custom Panel9 10
11
no. description date
1' -
0"
1' - 2" 1' - 2"
1' - 1 3/8" 1' - 1 3/8"
2' - 4"
Elevation
Plan
Custom Drum Pendant Similar to X0013
1' -
4"
GWB Ceiling8'-0" A.F.F.
1' -
0"
2' - 10"
3' - 0"
1' - 6" 1' - 6"
3' - 3" 3' - 3"
6' - 6"
6' - 4"
Custom Lamp Shade with custom lamp X0057 over Small SetteeSide Elevation Front elevation
EQ EQ
GWB Ceiling8'-0" A.F.F.
1' -
4"
Custom Lamp Shade with custom lamp X0057 over Large SetteeSide Elevation
Front elevation
1' -
0"
2' - 10"
3' - 0"
1' - 6" 1' - 6"
3' - 10" 3' - 10"
7' - 8"
7' - 6"
EQ EQ
GWB Ceiling8'-0" A.F.F.
1' -
4"
ACT MAIN AND CROSS TEE
ACOUSTICAL CEILING TILE
SLIDING BRACKET ATTACHED TO TEEFLANGE WITH 14x1/2" HEX-HEAD SHEETMETAL SCREWS
LIGHTING FIXTURE TRACKATTACHED TO SLIDING BRACKETABOVE ACT W/ #12x1 MTL. SCREWS@ 2'-0" O.C.
5"
6"
Electric conduit to support can light pendant
Powder coat can housing black
8'-0" A.F.F.
NOTE: Pendant typeinstallation for can lights notinstalled in new gyp ceiling only
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:1
9:14
PM
A-506
0816.01
Author
Checker
05-25-2012
Starbucks Coffee Company
Light Fixture Details
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Scale: 3/4" = 1'-0"
X0057 Custom Drum PendantScale: 3/4" = 1'-0"
X0058 Custom Lamp ShadeScale: 3/4" = 1'-0"
X0059 Custom Lamp Shade2 3 4
Scale: 3/4" = 1'-0"1 Track Mounting
no. description date
Scale: 3" = 1'-0"5 Suspended Can Light Pendant
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:1
9:22
PM
A-601
0816.01
Author
Checker
05-25-2012
Starbucks Coffee Company
Schedules
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Signage ScheduleDesign ID Count Description Responsibility Bulb Comments
Signage13181 2 Sign - Disk DF Illuminated Suspended
Evolved - 18in 455mmSB
Furniture ScheduleDesign ID Count Description Responsibility Comments
22 Air Hockey Table6 Ping Pong Table
Fixed Multiple Seating12184 30 Table - Base Cafe Dome Accent - 12x28in
305x710mm - Hot Rolled Steel MT0011SB
12193 3 Table - Base Fixed Dome Accent andGussets - 36in 915mm - Hot Rolled SteelMT0011
SB See Casework for custom Queue Railcounter top
X0001 8 Table - Base Bar Height Dome Accent -18x42in - Hot Rolled Steel MT0011
SB
Furniture & Accessories9
12303 38 Chair - Cafe Square Back - Dark BrownWD0009
SB
X0002 4 Table - Occasional Solid Walnut Top, clearfinish with Hairpin Legs
SB Icon Modern
X0003 34 Chair - EMECO Navy Chair - BrushedAluminum
SB Brushed Aluminum - Icon Modern
X0004 11 Chair - EMECO Navy Barstool - BrushedAluminum with wood seat 30"
SB Brushed Aluminum with Walnut Seat - IconModern
X0005 3 Ottoman - L2R Ottoman - Walnut withCream White - 002
SB MFG: InMod - www.inmod.com
X0006 4 Chair - L2R Lounge Chair - Tan Walnut w/cream white - 002 Leather Seat
SB MFG: InMod - www.inmod.com
X0032 1 InMod - Brades Loveseat - 66in - Code#kens-ls-brades - in Cream
SB MFG: InMod - www.inmod.com
Movable Multiple Seating10513 7 Table - Cafe Metal Suite Round - 28in
710mm - Black MT0022SB
10818 3 Table - Cafe Legs Set of 4 - 28in - BlackPowder Coat
SB
12149 16 Chair - Cafe Slatted Metal Suite - BlackMT0022
SB
12160 1 Table - Accessible Metal Suite - 39x23in990x585mm - Black MT0022
SB
X0008 3 Table - Cafe Top Square - 38in - SolidWalnut, clear finish
SB Based on Design ID 11051 - Icon ModernWD0001
X0009 2 Custom Community Table Top 42" x 11'-0"with live edge
SB Solid Reclaimed Walnut top - WD0001 with1/4" Thick Tube Steel Legs - Icon Modern
X0010 8 Custom Table - Top Square - 24in - Corian SB CP0017X0033 30 Table - Top Round Corian - 24in SB CP0017
Specialty Equipment ScheduleDesign ID Count Description Responsibility Comments
111901 1 Condiment Cart Pan SST - 38x13in SB12023 2 Sugar Dispenser SST - 17in SB
Bath & Toilet Accessories10977 1 Paper Towel Dispenser Full Size -
Translucent GreySB
11115 1 Soap Dispenser Sink Mounted SBFire Extinguishers
10501 1 Fire Extinguisher LCFood Service - Appliances & Equipment
10102 1 Ice - Bin 590lb SB10344 1 Ice - Bin Drop In 95lb SB10452 4 Brewer Warming Stand SB10473 1 Fridge Undercounter 2 Door - 48in SB10475 1 Ice - Machine 1109lb Air Cooled Side Vent SB10495 1 Brewer Dual SB10527 1 Ice - Bin Drop In 45lb SB10724 1 Grinder Grindmaster SB10797 1 Pastry Case with Self Serve - 66in -
BronzeSB
10917 4 Brewer Server SB10967 1 Freezer Reach In 2 Door - 51in SB11083 1 Fridge Reach In 2 Door - 51x35in SB12407 1 Oven TurboChef Next Generation SB12480 1 Fridge 1 Door with Countertop - 29in - SST SB12508 2 Blender Quiet Model On Counter SB12618 1 Fridge Undercounter 1 Door with Shelf -
27in 685mmSB
12694 2 Espresso Machine Mastrena SB13238 2 Airpot SB
Other Equipment10091 2 Cup Dispenser Tall Hot Vertical SB10314 1 Scale Digital with Adjustable Display
MountSB
10396 2 Cup Dispenser Short Hot Vertical SB10439 2 Cup Dispenser Grande Venti Hot
HorizontalSB
10757 1 Cup Dispenser Tall Cold Horizontal SB10788 1 Cup Dispenser Tall Hot Horizontal SB10855 4 Cup Dispenser Grande Venti Hot Vertical SB10947 1 Soap Dispenser Wall Mounted SB11055 2 Cup Dispenser Grande Venti Cold
HorizontalSB
11737 1 Cup Dispenser Short Hot Horizontal SBParts Bins
10305 1 Trash Drop Ring Liner Square - Black SB11061 4 Trash Drop Ring Round SB
Shelving10222 1 Wire Shelf Grid at Sink SB10416 9 Workroom Wire Shelving SB10462 9 Workroom Wire Shelving Posts SB10698 1 Mop Rack with 3 Holders SB10838 1 Rolling Wire Cart for 3 Comp Sink SB
Solid Waste Handling Equipment11070 1 Dishwasher Sanitizer SB
Graphics ScheduleDesign ID Count Description Responsibility Comments
Movable Artwork12860 1 Menu Board - 3 Panel Insert Style
Universal MountSB
12976 1 Menu Board - Daily Offering ChalkboardUniversal Mount Rectangular
SB
X0035 1 Framed Image NS0020 LS 2" Wood Frame to match WD0001 with 3"white matte
X0036 1 Framed Image NS0020 LS 2" Wood Frame to match WD0001 with 3"white matte
X0037 1 Framed Image NS0042 LS 2" Wood Frame to match WD0001 with 3"white matte
X0038 1 Framed Local Relevant Image Img001 LS 2" Wood Frame to match WD0001 with 3"white matte
X0039 1 Framed Local Relevant Image Img005 LS 2" Wood Frame to match WD0001 with 3"white matte
X0040 1 Framed Local Relevant Image Img011 LS 2" Wood Frame to match WD0001 with 3"white matte
X0041 1 Framed Local Relevant Image Img027 LS 2" Wood Frame to match WD0001 with 3"white matte
X0042 1 Mural NS0142 LS Mural NS0142 - Cropped to fit wall with 6"wood frame to match WD0001
Plumbing Fixture ScheduleDesign ID Count Description Responsibility Comments
1 EZ ADACold Water Service
10153 1 Faucet - Water Tower - 12in SBFloor Drains
10294 5 Drain - Floor Sink Square - 12in GC Refer to Penetration Plan for Tag &Locatoin
Food Service Equipment10874 1 Insta Hot Tap SB
Other Plumbing Fixtures10152 1 Faucet - Double Laboratory with Bent
Riser Spout10215 2 Faucet - Double Laboratory with Swing
SpoutSB
10447 1 Faucet - Pre Rinse Sprayer Wall Mounted SB10597 2 Faucet - Single Handle SB10922 1 Faucet - Mop Sink Wall Mounted SB11003 1 Faucet - Dipperwell SB
Sinks3
10505 1 Sink - Rinse Drop In - 27x20in SB10549 1 Sink - Work Drop In SST - 12x20in SB10581 1 Sink - Work Wall Mounted SST SB10719 1 Sink - 3 Comp Work SST - 88in SB10995 1 Sink - Mop - 24in GC
Urinals - Single1
Water Closets - Single3
Lighting Fixture ScheduleDesign ID Count Description Responsibility Bulb Comments
11154 8 Troffer - Recessed - 24x24in 610x610mm -White
SB
11458 21 Can - Adjustable Recessed Housing - 5in125mm - New Ceiling
SB
11533 72 Can - Recessed Housing - 5in 125mm -New Ceiling
SB
12934 4 Track - with Connectors - 4ft 122cm -White
SB
12956 16 Track - Fixture Open Flared - 3.5in 90mm -White
SB
13242 21 Can - Adjustable Recessed Trim - 5in125mm - White
SB GC to paint trim to match adjacentsurfaces
13244 72 Can - Recessed Trim - 5in 125mm - White SB GC to paint trim to match adjacentsurfaces
X0011 2 Floor Lamp - Mitra Floor Lamp BySonneman
SB (2) 26 Watt 120 Volt GU24 BaseFluorescent lamps
Lumens - Item #R303415 in Black Brass -www.lumens.com - Refer to FF&E Plan forTag & Location
X0012 3 Pendant -Loft - Maple by Fredric Ramond SB (1) 4.8 Watt 120 Volt Type GU24LED lamp
Lumens - Item #R302950 -www.lumens.com - Refer to FF&E Plan forTag & Location
X0013 10 Pendant - Fabric Drum - 22in SB (1) 200 Watt 120 Volt Type AIncandescent lamp
Lumens - Item #R039760 - Buster Pendantby Robert Abbey - Deep Patina Bronzewith Muslin Claiborne Fabric -www.lumens.com - Refer to FF&E Plan forTag & Location
X0014 6 Task Light - 24in - Manufacturer: LSI,Model: LDL2 24
SB LSI - www.lsi-industries.com
X0057 4 Custom Pendant - Fabric Drum - 28in SB (1) 200 Watt 120 Volt Type AIncandescent lamp
Similar to Lumens - Item #R039760 -Buster Pendant by Robert Abbey -www.lumens.com - Refer to FF&E Plan forTag & Location
X0058 1 Custom Settee Lamp Shade - Small SB Custom Lamp Shade - see design detailsX0059 1 Custom Settee Lamp Shade - Large SB Custom Lamp Shade - see design details
Lamp ScheduleDesign ID Count Description Responsibility Comments
12906 16 LED PAR 20 1-9w Nfl - White SB13257 21 LED PAR 30S 10-19w Flood SB
Lighting - Fluorescent19
11260 12 FL T5 8w 3000K SB12871 72 CFL T4 Biax 18w 2700K SB12893 16 FL T8 U 32w 3000K SB
Note: All responsibilities to be confirmed withStarbucks DM prior to ordering / construction
Responsibility Legend - Licensed StoresFC Provided by Starbucks - Installed by Fixture ContractorGC Provided by General Contractor - Installed by General ContractorLC Provided by Licensee - Installed by General ContractorSB Provided by Starbucks - Installed by General Contractor
*All custom furniture itpens to be provided by Icon Modern Contact:[email protected]: 312-560-2067Unless otherwise noted.
Data Device ScheduleDesign ID Count Description Responsibility Comments
Public Address & Music Systems10005 1 Music System SB10017 7 Speaker Surface Mounted - (Designer
Specify) White or BlackSBSB
10076 1 Amplifier SB
no. description date
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:1
9:31
PM
A-602
0816.01
Author
Checker
05-25-2012
Starbucks Coffee Company
Schedules
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Casework ScheduleDesign ID Count Description Responsibility Comments
11155 2 Espresso Machine Pump Mount - 10x10in FC11900 1 Condiment Cart Island Top Solid Surface -
59inFC See casework finish schedule
11902 1 Cabinet - Upper Cubby - 27x16x14in FC11915 1 Countertop - Hand Sink Stainless - 15in
380mmFC
11930 1 Countertop - Espresso Inline IntegralRinse Sink Stainless - RH - 96in
FC See casework finish schedule
11933 1 Countertop - Warming Solid Surface - 16in405mm
FC See casework finish schedule
11942 1 Cabinet - Warming with Drawer - 16in405mm
FC
11945 1 Cabinet - 12in 305mm FC11956 1 Cabinet - Upper Cubby - 28x16x28in
700x405x720mmFC
11959 1 Fit Kit - Upper Cubby - Variable to 9in230mm
FC
11971 3 Cabinet - Sink or Ice Bin - 15in FC11972 1 Cabinet - Espresso with Cup Dispenser -
24inFC
11973 1 Condiment Cart Island Base - 59in FC See casework finish schedule11977 9 Cabinet - Upper Cubby - 24x16x21in
610x405x535mmFC See casework finish schedule
11993 1 Espresso Inline Sneeze Guard for 126in FC11994 1 POS Double Server Shroud - 30in 760mm FC See casework finish schedule12007 1 Cabinet - Sink - 24in FC12014 1 Cabinet - Door with Blocking - 15in 380mm FC12080 2 Cabinet - 15in 380mm FC12082 1 Cabinet - CBS Ice Bin - LH - 24in FC12091 1 Countertop - Handoff Rounded Stone - RH
- 30x33inFC See casework finish schedule
12096 2 Cabinet - with Drawer - 15in 380mm FC12098 1 Cabinet - Brew Grind - 24in 610mm FC12100 3 Espresso Countertop Support Leg
StainlessFC
12127 1 Cabinet - POS with Cup Dispenser Panel -30in 760mm
FC
12816 4 French Cleat - Variable 12in to 96in FC 20' -5" Total Length12816 1 French Cleat - Variable to 96in 2440mm FC Designer To Verify Quantity. Provide
Overall Length Required12845 5 Soffit - Light Valance - 96x2in FC 23'-3" Total Length12845 1 Soffit - Light Valance - 96x2in 2440x50mm FC Designer To Verify Quantity. Provide
Overall Length Required13287 1 Countertop - POS Double Server Solid
Surface - 30in 760mmFC See casework finish schedule
X0016 1 Custom Queue - 10" x 7'-0" SB Top Cap - See CW finish scheduleX0020 1 Custom Scale Toe Kick Corner - 15in
380mmFC Based on Design ID 11970
X0029 1 Custom Countertop - CBS Shared RinseSink and Ice Bin L Shape Solid Surface -LH - 84x67in
FC See Casework Finish Schedule
X0031 1 Custom Sit Here Sneeze Guard FC Based on Design ID 11993X0034 1 Fit Kit - Custom Upper Cubby End Piece -
3 1/8"FC Based on Design ID 11959, See casework
finish scheduleX0043 1 Custom POS Toe Kick Corner FC Based on Design ID 11916, See casework
finish scheduleX0044 1 Custom Countertop - Scale Stone - 15in
based on 11992FC Based on Design ID 11992, See casework
finish scheduleX0048 1 Countertop - Brew Grind Solid Surface -
LH - 57inFC Based on Design ID 12776, See casework
finish scheduleX0049 1 Custom Countertop - Brew Grind Work
Sink and Trash Solid Surface - LH - 93inFC Based on Design ID 12779, See casework
finish scheduleX0050 1 Custom Cabinet - POS with Filler - RH -
29inFC Based on Design ID 12086, See casework
finish scheduleX0051 1 Custom Cabinet - POS with Filler - LH -
29inFC Based on Design ID 11990, See casework
finish scheduleX0052 1 Countertop - POS Double Server Stone FC Based on Design ID 12788, See casework
finish scheduleX0056 1 Custom Cabinet - Scale - 15in FC Based on Design ID 11985, See casework
finish scheduleFixed Casework
11912 1 Panel - Espresso Inline - RH - 126in FC See Casework Finish Schedule11957 1 Panel - Cup Dispenser FC12103 1 Diewall - Inline Handoff Support - RH FC12128 1 Diewall - Espresso Inline - RH - 126in FC12775 1 Panel - POS Double Server - 30in 760mm FC12802 1 Diewall - Espresso Inline Top Cap - RH -
126inFC See casework finish schedule
X0017 1 Panel - CBS - RH - 126in FC See Casework Finish ScheduleX0018 1 Diewall - CBS - RH - 126in FCX0030 1 Diewall - Sit-Here Top Cap - RH - 126in FC See casework finish scheduleX0046 1 Custom Partial Wall Cap FC See Casework Finish ScheduleX0047 1 Custom Partial Wall Cap FC See Casework Finish ScheduleX0053 1 Panel - Scale - 16in 405mm FC Based on Design ID 11907, See casework
finish scheduleX0054 2 Panel - POS - 45in based on 11951 FC See Casework Finish ScheduleX0055 1 Panel - Partial Height Wall FC Based on Design ID 11907, See casework
finish scheduleX0060 19 Suspended Lamlite Ceiling panel SB 3/4" thick Lamlite Panel with Walnut
VeneerFixed Multiple Seating
X0021 2 Custom U-Shape Settee FC based on 12844 - Moore + Giles - Leather;Brighton in "Spice" - Refer to CaseworkFinish Schedule and details 1/I-502,2/I-502, and 3/I-502
X0022 1 Banquette - with Thick Seat FC based on 12844 - Moore + Giles - LeatherSeat; Brighton in "Chocolate"; Back:Maharam; Pattern: Crush 464780, in "001Feather" - Refer to Casework FinishSchedule and details 1/I-502, 2/I-502, and3/I-502
X0023 1 Custom High Banquette FC based on 12844 - Moore + Giles - LeatherSeat; Brighton in "Chocolate"; Back:Maharam; Pattern: Crush 464780, in "001Feather" - Refer to Casework FinishSchedule and details 1/I-502, 2/I-502, and3/I-502
X0024 4 Custom L-Shape Settee FC based on 12844 - Moore + Giles - Leather;Brighton in "Spice" - Refer to CaseworkFinish Schedule and details 1/I-502,2/I-502, and 3/I-502
Furniture & AccessoriesX0045 3 Coat Hook 2 Prong FC Rejuvenation Cast Iron Double Hook Item
# C0189 from rejuvenation.com888-401-1900
Finish - Ceiling TreatmentDesign ID Area Description Responsibility Comments
X0015 1091 SF Wood Planking - 1x4 - 16'-0" Bd cut to fit FC 16' Boards cut to fit; see casework finishschedule
Finish - Floor TreatmentDesign ID Area Description Responsibility Comments
11158 19 SF Walk off Mat GC11289 3399 SF Concrete Stain - Dark Brown GC GC to infill score cuts with grout to match
concrete12910 3324 SF Vinyl - Resilient Tile - Light Grey GC Provided
Finish - Wall BaseDesign ID Length Description Responsibility Comments
11403 488' - 2 3/4" Tile Base - Jackson Nero - 6x12in150x305mm
Grout Specification 008: Mapei 10 - Black;Laticrete 45 - Raven
Finish - Wall Treatment (Area)Design ID Area Description Responsibility Comments
11428 824 SF Plastic - Fiberglass Reinforced Panel -Almond
GC Marlite P-100 - White.090 FRP
12226 893 SF Tile - Olive Grey Mosaic - 6x24in150x610mm
SB Grout Specification 009: Mapei 11 -Sahara Beige; Laticrete 24 - Natural Grey
12320 178 SF Tile - Mottled Dark Brown - 2x8in50x205mm
SB Grout Specification 007: Mapei 47 -Charcoal; Laticrete 35 - Mocha
X0027 317 SF Plank B - 1x6 FC 10' Boards cut to fit; See casework finishschedule
Finish - Wall Treatment (Length)Design ID Length Description Responsibility Comments
Wall Finishes - CoveringsX0025 57' - 7 3/4" Chair Rail - 4in (100mm) GC See Casework Finish Schedule for
MaterialX0063 56' - 6 1/4" Leather - Wall Covering - L0003 Brighton,
Spice - 36in (915) AFF 2SB Moore + Giles L0003 Brighton, Spice 36in
X0064 1' - 5" Leather - Wall Covering - L0003 Brighton,Spice - 40.5in (915) AFF 2
SB Moore + Giles L0003 Brighton, Spice40.5in
Finish - PaintColor Code Material: Description LRV Responsibility Comments
SW - Dapper Tan ; NCS / Akzo Nobel -Rough Hewn
24 SW use CP-1 Primer; NCS - S5010 Y10R ;Akzo Nobel - 20YY 24/177
P546-SG SW - Library Pewter 20 GC SW use CP-1 PrimerP551-ES SW - Wool Skein 64 GC SW use CP-1 PrimerP551-SG SW - Wool Skein 64 GC SW use CP-1 PrimerP552-ES SW - Mega Greige 20 GC SW use CP-1 PrimerSW6272 SW6272 Plum Brown Accent Walls 7 GC SW use CP-1 Primer
Note: All responsibilities to be confirmed withStarbucks DM prior to ordering / construction
Responsibility Legend - Licensed StoresFC Provided by Starbucks - Installed by Fixture ContractorGC Provided by General Contractor - Installed by General ContractorLC Provided by Licensee - Installed by General ContractorSB Provided by Starbucks - Installed by General Contractor
CW Finish - NCS Regional ModernLocation Description Finish Code Comments
Concept FinishBackbar Casework Exterior Plastic Laminate - Medium Tone
Brown with GrainPL0014
Backbar Countertops Composite - Dark Grey withFlecks
CP0001
Backbar Storage Cubbies Plastic Laminate - Medium ToneBrown with Grain
PL0014
Condiment Cart Top Composite - Dark Grey withFlecks
CP0001
Condiment Cart, Etagere, Merch Bay Exterior Plastic Laminate - Medium ToneBrown with Grain
PL0014
Espresso Countertops Stainless Steel - #4 Brushed16ga SST
Espresso Countertops, Handoff Composite - Black Recycled CP0007Espresso Finish Panel Trim, Coffee Shuttle Shroud Hot Rolled Steel with Matte
SealerMT0011
Espresso Finish Panels Wood - Warm Brown Dark Tone,Distressed
WD0019
Espresso Top Cap Wood - Warm Brown Dark Tone,Distressed
WD0001 Live Edge
Espresso Wing, Handoff Finish Panels Wood - Warm Brown Dark Tone,Distressed
WD0019
Finish Panel Brackets Cold Rolled Steel MT0002Partial wall finish panels @ bar Wood - Warm Brown Dark Tone,
DistressedWD0019
POS, Frontbar Countertops Composite - Black Recycled CP0007POS, Frontbar, POS Cash Corral Finish Panels Wood - Warm Brown Dark Tone,
DistressedWD0019
Sit-Here Bar Wood - Warm Brown Dark Tone,Distressed
WD0001 Live edge
Miscellaneous FinishBanquette & Settees Wood - Warm Brown Dark Tone,
DistressedWD0001
Chair Rail Wood - Warm Brown Dark Tone,Distressed
WD0001
Core Casework Interior Plastic Laminate - Almond(ST655-S)
Custom Partial Wall Cap, X0044 Composite - Black Recycled CP0007Custom Wall & Ceiling Planking Wood - Walnut Clear FinishDuplex Outlets in Wainscot Locations to match adjacentsurfaces
Switchplate - Part #4752-112-CDVenetian Bronze
GC supplied
Espresso, Customer Bar Sneeze Guard Tempered GlassEspresso, Customer Bar Sneeze Guard Hardware Stainless Steel - #4 Brushed
16ga SSTEspresso, POS, Frontbar Cabinet Back Plastic Laminate - BlackHand Sink Countertop Stainless Steel - #4 Brushed
16ga SSTPartial wall top cap @ Settees X0046 & X0047 Composite - Dark Grey with
FlecksCP0001
POS, Frontbar Cabinet Side Plastic Laminate - BlackQueue Rail Top Cap Wood - Warm Brown Dark Tone,
DistressedWD0001 Live Edge - 2
SidesSuspended Ceiling Panels X0057 Lamlite panel with Walnut
VeneerClear Finish
no. description date
Receptacle for Grinder/Scaleat 26" (660mm) AFF
Receptacle for Brewerat 26" (660mm) AFF
Double duplex receptacle for CoffeeWarmers at 26" (660mm) AFF
2' - 7" 1' - 8 3/4" 2' - 6 1/4"
8' - 6"
Receptacle for UndercounterRefrigerator at 26" (660mm) AFF
Receptacle(s) for Blender(s) at26" (660mm) AFF.
Receptacle and Data junction boxfor Cup Labeler at 26" (660mm)AFF
Optional Cup Labeler
7' - 0 1/2"
5' -
7"
2' - 10" 0' - 9" 1' - 2" 1' - 9"
Toe Kick (below)
Optional Espresso Machine layout
Receptacles for Espresso Machinesat 26" (660mm) AFF
Receptacle for Instant Hot WaterTap at 26" (660mm) AFF
21"x3" (530mmx75mm) stub-uppenetration area for Power and Data.See Electrical Plan for final location
Receptacle for UndercounterRefrigerator at 26" (660mm) AFF
Toe Kick
Receptacle and Data junction box forCup Labeler at 26" (660mm) AFF
Receptacles for Espresso MachinePumps at 26" (660mm) AFF
0' - 10" 1' - 0 1/4" 2' - 5 1/4" 1' - 0 1/4" 2' - 3"
Receptacle and Data junction box forCup Labeler at 26" (660mm) AFF
Receptacles for Espresso Machinesat 26" (660mm) AFF
Countertop (above)
Plan View
Electrical Components
Box base (below)
Receptacle for Coffee Warmer at 18"(460mm) AFF
Double duplex receptacle at 18" (460mm)AFF
18"x3" (460mmx75mm) stub-uppenetration area. Supply Power,Data, and Phone conduits for POS,and Power conduit for Pastry Case.See Electrical Design Plan for finallocation
Juntion box for Phone at 18"(460mm) AFF
Box base
Dedicated POS duplex receptacle at18" (460mm) AFF
Data Junction Box at 18" (460mm) AFF
Double duplex receptacle at 18" (460mm)AFF
1' - 10 1/4" 1' - 10" 2' - 6"
Dedicated POS duplex receptacle at18" (460mm) AFF
Countertop (above)
Plan View
Electrical Components
Receptacle for Warming Ovenat 26" (660mm) AFF
Double duplex receptacle for Refrigeratorand Cup Labeler at 26" (660mm) AFF
Data Junction Box for CupLabeler at 26" (660mm) AFF
0' - 9 3/4"0' - 6 1/4"
Clear
2' - 6"
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:1
9:40
PM
A-801
0816.01
Author
Checker
05-25-2012
Starbucks Coffee Company
Enlarged Electrical Plans
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Scale: 3/4" = 1'-0"1 Brew 05 - Electrical
Scale: 3/4" = 1'-0"2 CBS 07- ElectricalScale: 3/4" = 1'-0"3 Espresso 10 - Electrical
Scale: 3/4" = 1'-0"4 POS 17 - ElectricalScale: 3/4" = 1'-0"5 Warming 01 - Electrical
no. description date
Tempered hot and cold waterfor Sink Faucet at 20 1/2"(520mm) AFF. Shut-offvalves at wall and 4" (102mm)either side of waste line
Direct drain line fromSink. Rough-in sinkwaste stub at 15 1/2"(394mm) AFF andcenterline of sink
1' - 3"
0' - 7 1/2"
Hot and cold water for SinkFaucet at 20 1/2" (520mm)AFF. Shut-off valves at walland 4" (102mm) either side ofwaste line
Direct drain line from Sink.Rough-in sink waste stub at15 1/2" (394mm) AFF andcenterline of sink
Filtered Cold Water supply forBrewer with shut-off in cabinetat 24" (610mm) AFF8' - 6"
5' - 7 1/2"
See Plumbing Plan for final floor sink locationand type
Hot and cold water for Sink Faucet at 201/2" (520mm) AFF. Shut-off valves at walland 4" (102mm) either side of waste line
Indirect drain line from Drain Boardto floor sink
Indirect drain line from Sink to floor sink
Cold water supply for Pitcher Rinser
Indirect and insulated drain linefrom Ice Bin to floor sink
4' -
7"
5' -
7"
2' - 5 1/2"
7' - 0 1/2"
Legs (below)
Indirect drain line from EspressoMachine to floor sink (typ)
Indirect drain line fromIn-use Utensil RinseSink to floor sink
7"x3" (180mmx75mm)stub-up penetration area.See Plumbing Plan forfinal locations.Install shut-off valvesbetween stub-ups andequipment
Toe Kick
See Plumbing Plan for finalfloor sink location and type.Coordinate location withsupport legs
Filtered Cold water supply forInstant Hot Water Tap
Filtered Cold water supplyfor Water Tower Faucet
Cold water supply forMetered spoon rinser faucet
Filtered Cold water supply forEspresso Machine (typ)
Hot and Cold water supplyfor Pitcher Rinser faucet
Toe Kick (below)
Optional Espresso Machine layout
Countertop (above)
Legs
7' - 4 3/4"
2' -
3 1/
4"
Floor sink (below)
Plan View
Plumbing Components
Legs (below)
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCStudent Center113 Union DriveClemson, SC 29634
8/3/
2012
5:1
9:48
PM
A-802
0816.01
Author
Checker
05-25-2012
Starbucks Coffee Company
Enlarged Plumbing Plans
McKnight Smith Ward Griffin Engineers, Inc.4223 South Blvd.Charlotte, NC 28209704-527-2112 X156mswg.com
MEP
Scale: 3/4" = 1'-0"1 ADD 01 - PlumbingScale: 3/4" = 1'-0"2 Brew 05 - Plumbing
Scale: 3/4" = 1'-0"3 CBS 07 - PlumbingScale: 3/4" = 1'-0"4 Espresso 10 - Plumbing
no. description date
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCHarcombe Dinning Hall113 Union DriveClemson, SC 29634
6/5/
2012
8:0
1:27
AM
0816.01
07-31-2012
Starbucks Coffee
MEP
no. description date
08-03-2012
MECHANICAL DEMO PLAN M100
MSB, DAC
JCC
Men's
Restroom
Bar
Cafe
Seating
Workroom
Women's
Restroom
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCHarcombe Dinning Hall113 Union DriveClemson, SC 29634
6/5/
2012
8:0
1:27
AM
0816.01
07-31-2012
Starbucks Coffee
MEP
no. description date
08-03-2012
Mechanical Floor Plan M101
MSB, DAC
JCC
Mechanical Schedules & Details M201
MSB, DAC
JCC
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCHarcombe Dinning Hall113 Union DriveClemson, SC 29634
6/5/
2012
8:0
1:27
AM
0816.01
07-31-2012
Starbucks Coffee
MEP
no. description date
08-03-2012
Cafe
Seating
Workroom
Women's
Restroom
Men's
Restroom
Bar
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCHarcombe Dinning Hall113 Union DriveClemson, SC 29634
6/5/
2012
8:0
1:27
AM
0816.01
07-31-2012
Starbucks Coffee
MEP
no. description date
08-03-2012
PLUMBING PLAN P101
AKE
DAC
dwg no.
project no.
drawn
checked
project date
kenneth w. tipton, jr., aiabryon m. hume, aiadarrin l. badon, aiadaniel m. zito, aia
449 westmoreland drivebaton rouge, louisiana 70806
ph 225.387.0101fax 225.387.0104
www.tipton-associates.com
revisions
Clemson University, SCHarcombe Dinning Hall113 Union DriveClemson, SC 29634
6/5/
2012
8:0
1:27
AM
0816.01
07-31-2012
Starbucks Coffee
MEP
no. description date
08-03-2012
SCHEDULES & DETAILS P201
AKE
DAC
dwg no.
project no.
drawn
checked
project date
revisions
Clemson University, SCHarcombe Dinning Hall113 Union DriveClemson, SC 29634
6/5/
2012
8:0
1:27
AM
0816.01
07-31-2012
Starbucks Coffee
MEP
no. description date
S. Brown
M. Arrington
SYMBOLS AND SCHEDULES E100
dwg no.
project no.
drawn
checked
project date
revisions
Clemson University, SCHarcombe Dinning Hall113 Union DriveClemson, SC 29634
6/5/
2012
8:0
1:27
AM
0816.01
07-31-2012
Starbucks Coffee
MEP
no. description date
S. Brown
M. Arrington
SYMBOLS AND SCHEDULES E100
CafeSeating
Workroom
Women'sRestroom
Men'sRestroom
Bar
dwg no.
project no.
drawn
checked
project date
revisions
Clemson University, SCHarcombe Dinning Hall113 Union DriveClemson, SC 29634
6/5/
2012
8:0
1:27
AM
0816.01
07-31-2012
Starbucks Coffee
MEP
no. description date
S. Brown
M. Arrington
FLOOR PLAN - LIGHTING E201
CafeSeating
Workroom
Women'sRestroom
Men'sRestroom
Bar
EXISTINGELECTRICAL
CLOSET
dwg no.
project no.
drawn
checked
project date
revisions
Clemson University, SCHarcombe Dinning Hall113 Union DriveClemson, SC 29634
6/5/
2012
8:0
1:27
AM
0816.01
07-31-2012
Starbucks Coffee
MEP
no. description date
S. Brown
M. Arrington
FLOOR PLAN - POWER E301
dwg no.
project no.
drawn
checked
project date
revisions
Clemson University, SCHarcombe Dinning Hall113 Union DriveClemson, SC 29634
6/5/
2012
8:0
1:27
AM
0816.01
07-31-2012
Starbucks Coffee
MEP
no. description date
S. Brown
M. Arrington
POWER RISER DIAGRAM E401